Attachment 101290 Details for Bug 211859

dmesg-2.6.18-11-default.txt

dmesg-2.6.18-11-default.txt (text/plain), 12.85 KB, created by Olaf Hering on 2006-10-12 09:29:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Olaf Hering

Created: 2006-10-12 09:29:14 UTC

Size: 12.85 KB

patch

obsolete

><6>Using PowerMac machine description
><4>Total memory = 256MB; using 512kB for hash table (at cff80000)
><5>Linux version 2.6.18-11-default (geeko@buildhost) (gcc version 4.1.2 20060920 (prerelease) (SUSE Linux)) #1 Mon Oct 9 15:56:55 UTC 2006
><4>Found initrd at 0xc2782000:0xc3056a24
><6>Found a Paddington mac-io controller, rev: 0, mapped at 0xfdf80000
><6>PowerMac motherboard: Blue&White G3
><6>Found Grackle (MPC106) PCI host bridge at 0x0000000080000000. Firmware bus number: 0->1
><4>nvram: OF partition at 0x140
><4>nvram: XP partition at 0x11b0
><4>nvram: NR partition at 0x12b0
><7>Top of RAM: 0x10000000, Total RAM: 0x10000000
><7>Memory hole size: 0MB
><7>On node 0 totalpages: 65536
><7>  DMA zone: 65536 pages, LIFO batch:15
><4>Built 1 zonelists.  Total pages: 65536
><5>Kernel command line: start_shell quiet panic=42 install=nfs://dist.suse.de/dist/factory-all 
><6>irq: Found primary Apple PIC /pci@80000000/pci-bridge@d/mac-io@5 for 64 irqs
><6>irq: System has 64 possible interrupts
><4>PID hash table entries: 2048 (order: 11, 8192 bytes)
><4>GMT Delta read from XPRAM: 0 minutes, DST: off
><7>time_init: decrementer frequency = 24.934500 MHz
><7>time_init: processor frequency   = 400.000000 MHz
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
><7>High memory: 0k
><6>Memory: 245248k/262144k available (3572k kernel code, 16696k reserved, 520k data, 452k bss, 192k init)
><7>Calibrating delay loop... 49.79 BogoMIPS (lpj=99584)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><4>device-tree: Duplicate name in /cpus/PowerPC,750@0, renamed to "l2-cache#1"
><6>checking if image is initramfs... it is
><4>Freeing initrd memory: 9042k freed
><6>NET: Registered protocol family 16
><6>PCI: Probing PCI hardware
><3>PCI: Cannot allocate resource region 0 of device 0000:01:04.0
><4>PCI: Enabling device 0000:01:04.0 (0010 -> 0013)
><7>Registering pmac pic with sysfs...
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
><4>TCP established hash table entries: 8192 (order: 3, 32768 bytes)
><4>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
><6>TCP: Hash tables configured (established 8192 bind 4096)
><6>TCP reno registered
><4>Thermal assist unit using timers, shrink_timer: 500 jiffies
><6>audit: initializing netlink socket (disabled)
><5>audit(1160651424.984:1): initialized
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><4>PCI: Enabling device 0000:00:10.0 (0086 -> 0087)
><6>aty128fb: Found Open Firmware ROM Image
><6>aty128fb: BIOS not located, guessing timings.
><6>aty128fb: Rage128 RE PCI [chip rev 0x2] 16M 128-bit SDR SGRAM (1:1)
><4>Console: switching to colour frame buffer device 128x48
><6>fb0: ATY Rage128 frame buffer device on Rage128 RE PCI
><6>Generic RTC Driver v1.07
><6>Macintosh non-volatile memory driver v1.1
><6>pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
><6>ttyS0 at MMIO 0x80813020 (irq = 16) is a Z85c30 ESCC - Serial port
><6>ttyS1 at MMIO 0x80813000 (irq = 17) is a Z85c30 ESCC - Infrared port
><4>RAMDISK driver initialized: 16 RAM disks of 123456K size 1024 blocksize
><6>MacIO PCI driver attached to Paddington chipset
><4>Can't request resource 0 for MacIO device 0.00000000:power-mg
><6>input: Macintosh mouse button emulation as /class/input/input0
><4>Macintosh CUDA driver v0.5 for Unified ADB.
><6>apm_emu: Requires a machine with a PMU.
><6>adb: starting probe task...
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>CMD646: IDE controller at PCI slot 0000:01:01.0
><6>CMD646: chipset revision 7
><6>CMD646: chipset revision 0x07, UltraDMA Capable
><6>CMD646: 100% native mode on irq 26
><6>    ide0: BM-DMA at 0x1050-0x1057, BIOS settings: hda:pio, hdb:pio
><6>    ide1: BM-DMA at 0x1058-0x105f, BIOS settings: hdc:pio, hdd:pio
><7>Probing IDE interface ide0...
><7>adb devices:
><6>adb: finished probe task...
><7>Probing IDE interface ide1...
><6>ide2: Found Apple Heathrow ATA controller, bus ID 0, irq 32
><7>Probing IDE interface ide2...
><4>hde: MATSHITAPD-2 LF-D110, ATAPI CD/DVD-ROM drive
><4>hdf: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
><6>hde: Enabling MultiWord DMA 2
><4>ide2 at 0xd101c000-0xd101c007,0xd101c160 on irq 32
><7>Probing IDE interface ide0...
><7>Probing IDE interface ide1...
><7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
><6>ohci_hcd 0000:01:06.0: OHCI Host Controller
><6>ohci_hcd 0000:01:06.0: new USB bus registered, assigned bus number 1
><6>ohci_hcd 0000:01:06.0: irq 28, io mem 0x80880000
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: OHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.18-11-default ohci_hcd
><6>usb usb1: SerialNumber: 0000:01:06.0
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>usbcore: registered new driver hiddev
><6>usbcore: registered new driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>usb 1-2: new full speed USB device using ohci_hcd and address 2
><6>usb 1-2: new device found, idVendor=05ac, idProduct=1001
><6>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 1-2: Product: Hub in Apple USB Keyboard
><6>usb 1-2: Manufacturer: Alps Electric
><6>usb 1-2: configuration #1 chosen from 1 choice
><6>hub 1-2:1.0: USB hub found
><6>hub 1-2:1.0: 3 ports detected
><6>usb 1-2.1: new low speed USB device using ohci_hcd and address 3
><6>usb 1-2.1: new device found, idVendor=05ac, idProduct=0202
><6>usb 1-2.1: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 1-2.1: Product: Apple USB Keyboard
><6>usb 1-2.1: Manufacturer: Alps Electric
><6>usb 1-2.1: configuration #1 chosen from 1 choice
><6>input: Alps Electric Apple USB Keyboard as /class/input/input1
><6>input: USB HID v1.00 Keyboard [Alps Electric Apple USB Keyboard] on usb-0000:01:06.0-2.1
><6>usb 1-2.2: new low speed USB device using ohci_hcd and address 4
><6>usb 1-2.2: new device found, idVendor=05ac, idProduct=0307
><6>usb 1-2.2: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 1-2.2: Product: Apple Optical USB Mouse
><6>usb 1-2.2: Manufacturer: Logitech
><6>usb 1-2.2: configuration #1 chosen from 1 choice
><6>input: Logitech Apple Optical USB Mouse as /class/input/input2
><6>input: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:01:06.0-2.2
><6>usbcore: registered new driver appletouch
><6>mice: PS/2 mouse device common for all mice
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><4>Freeing unused kernel memory: 192k init
><6>hde: ATAPI DVD-ROM DVD-RAM drive, 2048kB Cache, DMA
><6>Uniform CD-ROM driver Revision: 3.20
><5>SCSI subsystem initialized
><6>st: Version 20050830, fixed bufsize 32768, s/g segs 256
><6>loop: loaded (max 8 devices)
><3>pmac_zilog 0.00013000:ch-b: irda_setup timed out on get_version byte
><6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
><4>        <Adaptec 2940B Ultra2 SCSI adapter>
><4>        aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
><4>
><5>  Vendor: IBM       Model: DDRS-39130D       Rev: DC2A
><5>  Type:   Direct-Access                      ANSI SCSI revision: 02
><4>scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
><6> target0:0:0: Beginning Domain Validation
><6> target0:0:0: wide asynchronous
><6> target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15)
><6> target0:0:0: Domain Validation skipping write tests
><6> target0:0:0: Ending Domain Validation
><5>SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: e5 00 00 08
><5>SCSI device sda: drive cache: write back
><5>SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: e5 00 00 08
><5>SCSI device sda: drive cache: write back
><6> sda: [mac] sda1 sda2 sda3 sda4
><5>sd 0:0:0:0: Attached scsi disk sda
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>  Vendor: IBM       Model: DNES-318350W      Rev: SA30
><5>  Type:   Direct-Access                      ANSI SCSI revision: 03
><4>scsi0:A:2:0: Tagged Queuing enabled.  Depth 32
><6> target0:0:2: Beginning Domain Validation
><6> target0:0:2: wide asynchronous
><6> target0:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
><6> target0:0:2: Domain Validation skipping write tests
><6> target0:0:2: Ending Domain Validation
><5>SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB)
><5>sdb: Write Protect is off
><7>sdb: Mode Sense: c3 00 00 08
><5>SCSI device sdb: drive cache: write back
><5>SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB)
><5>sdb: Write Protect is off
><7>sdb: Mode Sense: c3 00 00 08
><5>SCSI device sdb: drive cache: write back
><6> sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13
><5>sd 0:0:2:0: Attached scsi disk sdb
><5>sd 0:0:2:0: Attached scsi generic sg1 type 0
><6>mesh: configured for synchronous 5 MB/s
><6>mesh: performing initial bus reset...
><6>scsi1 : MESH
><6>Initializing USB Mass Storage driver...
><6>usbcore: registered new driver usb-storage
><6>USB Mass Storage support registered.
><7>ieee1394: Initialized config rom entry `ip1394'
><6>ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
><6>ieee1394: sbp2: Try serialize_io=0 for better performance
><6>eth0: BMAC+ at 00:50:e4:30:77:1f
><7>phy registers:
><7> 1100 7829 7810 0001 00a1 45e1 0003 0000
><7> 0000 0000 0000 0000 0000 0000 0000 0000
><7> 0000 0000 4000 0000 2ffb 0010 0000 0002
><7> 0001 0000 0000 0000 0000 0000 0000 0000
><5>lockd: failed to open /var/lib/nfs/state: err=-2
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>raid5: measuring checksumming speed
>   8regs     :   487.000 MB/sec
>   8regs_prefetch:   408.000 MB/sec
>   32regs    :   483.000 MB/sec
>   32regs_prefetch:   405.000 MB/sec
>raid5: using function: 8regs (487.000 MB/sec)
>raid456: module not supported by Novell, setting U taint flag.
>raid6: int32x1     72 MB/s
>raid6: int32x2    114 MB/s
>raid6: int32x4    148 MB/s
>raid6: int32x8    152 MB/s
>raid6: using algorithm int32x8 (152 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>multipath: module not supported by Novell, setting U taint flag.
>md: multipath personality registered for level -4
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>Adding 514072k swap on /dev/sda3.  Priority:-1 extents:1 across:514072k
>Adding 137980k swap on /dev/sdb10.  Priority:-2 extents:1 across:137980k
>oom-killer: gfp_mask=0x201d2, order=0
>Call Trace:
>[CD8C1C40] [C00086DC] show_stack+0x50/0x184 (unreliable)
>[CD8C1C60] [C0063B8C] out_of_memory+0x3c/0x180
>[CD8C1C90] [C0065508] __alloc_pages+0x1f8/0x2bc
>[CD8C1CE0] [C0066FDC] __do_page_cache_readahead+0xc4/0x254
>[CD8C1D60] [C0062F74] filemap_nopage+0x138/0x388
>[CD8C1D90] [C006EE10] __handle_mm_fault+0x658/0x1258
>[CD8C1DF0] [C00169C0] do_page_fault+0x34c/0x4cc
>[CD8C1F40] [C0012A00] handle_page_fault+0xc/0x80
>--- Exception: 401 at 0xd2cf630
>    LR = 0xce51d98
>Mem-info:
>DMA per-cpu:
>cpu 0 hot: high 90, batch 15 used:39
>cpu 0 cold: high 30, batch 7 used:22
>DMA32 per-cpu: empty
>Normal per-cpu: empty
>HighMem per-cpu: empty
>Free pages:        2036kB (0kB HighMem)
>Active:25824 inactive:34496 dirty:0 writeback:0 unstable:0 free:509 slab:1657 mapped:60 pagetables:148
>DMA free:2036kB min:2048kB low:2560kB high:3072kB active:103296kB inactive:137984kB present:262144kB pages_scanned:120774 all_unreclaimable? no
>lowmem_reserve[]: 0 0 0 0
>DMA32 free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
>lowmem_reserve[]: 0 0 0 0
>Normal free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
>lowmem_reserve[]: 0 0 0 0
>HighMem free:0kB min:128kB low:128kB high:128kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
>lowmem_reserve[]: 0 0 0 0
>DMA: 1*4kB 0*8kB 1*16kB 1*32kB 1*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 0*2048kB 0*4096kB = 2036kB
>DMA32: empty
>Normal: empty
>HighMem: empty
>Swap cache: add 0, delete 0, find 0/0, race 0+0
>Free swap  = 0kB
>Total swap = 0kB
>Free swap:            0kB
>65536 pages of RAM
>0 pages of HIGHMEM
>1863 reserved pages
>500 pages shared
>0 pages swap cached
>Out of Memory: Kill process 2401 (YaST2.call) score 1789 and children.
>Out of memory: Killed process 2969 (Xorg).

Actions: View

Attachments on bug 211859: 101290 | 114296