Attachment 104796 Details for Bug 220197

dmesg output from chroot

dmesg.txt (text/plain), 15.80 KB, created by Francis Giannaros on 2006-11-11 15:49:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Francis Giannaros

Created: 2006-11-11 15:49:43 UTC

Size: 15.80 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/hda3 vga=0x31a resume=/dev/hda2  splash=silent showopts)
>Linux version 2.6.18.1-7-default (geeko@buildhost) (gcc version 4.1.2 20061018 (prerelease) (SUSE Linux)) #1 SMP Fri Oct 20 12:25:45 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>ACPI: RSDP (v000 VIAK8                                 ) @ 0x00000000000f67d0
>ACPI: RSDT (v001 VIAK8  AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000003fff3000
>ACPI: FADT (v001 VIAK8  AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000003fff3040
>ACPI: MADT (v001 VIAK8  AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000003fff7980
>ACPI: DSDT (v001 VIAK8  AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000003fff0000
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-000000003fff0000
>On node 0 totalpages: 257397
>  DMA zone: 2892 pages, LIFO batch:0
>  DMA32 zone: 254505 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>Built 1 zonelists.  Total pages: 257397
>Kernel command line: root=/dev/hda3 vga=0x31a resume=/dev/hda2  splash=silent showopts
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 2210.217 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>CPU 0: aperture @ e0000000 size 64 MB
>Memory: 1024480k/1048512k available (1919k kernel code, 23644k reserved, 1282k data, 188k init)
>Calibrating delay using timer specific routine.. 4424.83 BogoMIPS (lpj=8849665)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 28k freed
>checking if image is initramfs... it is
>Freeing initrd memory: 3441k freed
>ACPI: Core revision 20060707
> not found!
>Using local APIC timer interrupts.
>result 12558074
>Detected 12.558 MHz APIC timer.
>Brought up 1 CPUs
>testing NMI watchdog ... OK.
>migration_cost=0
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
>ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
>ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
>ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 64M @ 0xe0000000
>PCI-DMA: Disabling IOMMU.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e4000000-e6ffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1163246661.524:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 10240k, total 262144k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 76041 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>input: AT Translated Set 2 keyboard as /class/input/input1
>logips2pp: Detected unknown logitech mouse model 127
>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 1
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 188k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_via 0000:00:0f.0: version 2.0
>ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
>ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
>sata_via 0000:00:0f.0: routed to hard irq line 11
>ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x9402 bmdma 0xA000 irq 169
>ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9C02 bmdma 0xA008 irq 169
>scsi0 : sata_via
>ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x9007
>scsi1 : sata_via
>ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x9807
>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
>PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 9
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
>    ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: ST3250823A, ATA DISK drive
>Losing some ticks... checking if CPU frequency changed.
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 512KiB
>hda: Host Protected Area detected.
>	current capacity is 488395055 sectors (250058 MB)
>	native  capacity is 488397168 sectors (250059 MB)
>hda: Host Protected Area disabled.
>hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 >
>Probing IDE interface ide1...
>hdc: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>mbcache: module not supported by Novell, setting U taint flag.
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>AppArmor: AppArmor (version 2.0-19.43r6320) initialized
>audit(1163246669.184:2): AppArmor (version 2.0-19.43r6320) initialized
>
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>lp0: using parport0 (polling).
>8139too Fast Ethernet driver 0.9.27
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 177
>eth0: RealTek RTL8139 at 0xffffc20000038000, 00:0f:ea:e2:3e:e8, IRQ 177
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
>ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 185
>PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 9
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 185, io base 0x0000ac00
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.18.1-7-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:10.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 185
>PCI: VIA IRQ fixup for 0000:00:10.1, from 10 to 9
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 185, io base 0x0000b000
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.18.1-7-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:10.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 185
>PCI: VIA IRQ fixup for 0000:00:10.2, from 5 to 9
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 185, io base 0x0000b400
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.18.1-7-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:10.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 185
>PCI: VIA IRQ fixup for 0000:00:10.3, from 5 to 9
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.3: irq 185, io base 0x0000b800
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.18.1-7-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:10.3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 185
>PCI: VIA IRQ fixup for 0000:00:10.4, from 11 to 9
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:10.4: irq 185, io mem 0xe7000000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.18.1-7-default ehci_hcd
>usb usb5: SerialNumber: 0000:00:10.4
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
>ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>nvidia: module not supported by Novell, setting U taint flag.
>nvidia: module license 'NVIDIA' taints kernel.
>GSI 20 sharing vector 0xC9 and IRQ 20
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
>NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-9625  Thu Sep 14 15:31:20 PDT 2006
>Adding 1261088k swap on /dev/hda2.  Priority:-1 extents:1 across:1261088k
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>loop: loaded (max 8 devices)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ processors (version 2.00.00)
>powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x2
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x6
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>cpufreq_conservative: module not supported by Novell, setting U taint flag.
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>NET: Registered protocol family 17
>audit(1163246691.504:3): audit_pid=3153 old=0 by auid=4294967295
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>eth0: no IPv6 routers present
>NET: Registered protocol family 4
>ax25: module not supported by Novell, setting U taint flag.
>NET: Registered protocol family 3
>NET: Registered protocol family 5
>emerald-theme-m[7650]: segfault at 0000000000000000 rip 00000000004071ae rsp 00007fff5df25e40 error 4
>(fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 1984 to 2296
>(fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 8628 and revoked 86/453 blocks
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda5, internal journal
>ext3_orphan_cleanup: deleting unreferenced inode 270779
>EXT3-fs: hda5: 1 orphan inode deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.

Actions: View

Attachments on bug 220197: 104796 | 105851 | 107179 | 107796