Attachment 108344 Details for Bug 226044

output of dmesg

dmesg.out (text/plain), 17.50 KB, created by Johannes Meixner on 2006-12-05 13:41:45 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Johannes Meixner

Created: 2006-12-05 13:41:45 UTC

Size: 17.50 KB

patch

obsolete

>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
> BIOS-e820: 000000001ffd0000 - 000000001ffdf000 (ACPI data)
> BIOS-e820: 000000001ffdf000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000ff780
>On node 0 totalpages: 131024
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 126928 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>IO/L-APIC allowed because system is MP or new enough
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f5380
>ACPI: RSDT (v001 A M I  OEMRSDT  0x09000319 MSFT 0x00000097) @ 0x1ffd0000
>ACPI: FADT (v002 A M I  OEMFACP  0x09000319 MSFT 0x00000097) @ 0x1ffd0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x09000319 MSFT 0x00000097) @ 0x1ffd0390
>ACPI: OEMB (v001 A M I  OEMBIOS  0x09000319 MSFT 0x00000097) @ 0x1ffdf040
>ACPI: DSDT (v001  MOHR2 MOHR2026 0x00000026 INTL 0x02002026) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
>Detected 2992.546 MHz processor.
>Built 1 zonelists.  Total pages: 131024
>Kernel command line: root=/dev/hda5 vga=normal resume=/dev/hda3 splash=silent
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 512296k/524096k available (1697k kernel code, 11164k reserved, 968k data, 196k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5989.53 BogoMIPS (lpj=11979065)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>checking if image is initramfs... it is
>Freeing initrd memory: 3242k freed
>ACPI: Core revision 20060707
>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5985.37 BogoMIPS (lpj=11970757)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
>Total of 2 processors activated (11974.91 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>migration_cost=79
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:09: ioport range 0x680-0x6ff has been reserved
>pnp: 00:09: ioport range 0x290-0x297 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fc900000-fe9fffff
>  PREFETCH window: e7f00000-f7efffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: b000-bfff
>  MEM window: fea00000-feafffff
>  PREFETCH window: 30000000-300fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>Machine check exception polling timer started.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1165325118.828:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>input: AT Translated Set 2 keyboard as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 196k freed
>Time: tsc clocksource has been installed.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 169
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>scsi0 : AdvanSys SCSI 3.3K: PCI Ultra: IO 0xB800-0xB80F, IRQ 0xA9
>  Vendor:           Model: ScanMaker X12USL  Rev: 1.30
>  Type:   Scanner                            ANSI SCSI revision: 02
>scsi 0:0:6:0: Attached scsi generic sg0 type 6
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: ST3120022A, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 512KiB
>hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>Probing IDE interface ide1...
>hdc: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive
>hdd: Pioneer DVD-ROM ATAPIModel DVD-121 0100, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>parport0: Printer, EPSON Stylus COLOR 460
>lp0: using parport0 (interrupt-driven).
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>intel_rng: FWH not detected
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 865 Chipset.
>agpgart: AGP aperture is 64M @ 0xf8000000
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 185
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000e000
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000e400
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000e800
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>i8xx TCO timer: failed to reset NO_REBOOT flag, reboot disabled by hardware
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 193, io base 0x0000ec00
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 169, io mem 0xfebffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdd: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33)
>ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 18 (level, low) -> IRQ 177
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[feafd000-feafd7ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
>e100: Copyright(c) 1999-2005 Intel Corporation
>usb 1-1: device not accepting address 2, error -71
>intel8x0_measure_ac97_clock: measured 54067 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 209
>e100: eth0: e100_probe: addr 0xfeaff000, irq 209, MAC addr 00:0C:6E:DE:64:45
>Adding 514072k swap on /dev/hda3.  Priority:-1 extents:1 across:514072k
>usb 5-5: new high speed USB device using ehci_hcd and address 4
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[08004603017e8360]
>usb 5-5: new device found, idVendor=054c, idProduct=0174
>usb 5-5: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 5-5: Product: UMH-U01
>usb 5-5: Manufacturer: Sony
>usb 5-5: SerialNumber: 0000000123F0
>usb 5-5: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>usb 1-1: new full speed USB device using uhci_hcd and address 4
>usb 1-1: new device found, idVendor=03f0, idProduct=0417
>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1: Product: HP LaserJet 1220
>usb 1-1: Manufacturer: HewLett Packard
>usb 1-1: SerialNumber: 00XXXXXXXXXX
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-2: new full speed USB device using uhci_hcd and address 5
>usb 1-2: new device found, idVendor=04b8, idProduct=010b
>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2: Product: Perfection1240
>usb 1-2: Manufacturer: EPSON
>usb 1-2: configuration #1 chosen from 1 choice
>scsi1 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0417
>usbcore: registered new driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>  Vendor: Sony      Model: UMH-U HS-MS       Rev: 2.12
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 1:0:0:0: Attached scsi removable disk sda
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>  Vendor: Sony      Model: UMH-U HS-CF       Rev: 2.12
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 1:0:0:1: Attached scsi removable disk sdb
>sd 1:0:0:1: Attached scsi generic sg2 type 0
>  Vendor: Sony      Model: UMH-U HS-SM       Rev: 2.12
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 1:0:0:2: Attached scsi removable disk sdc
>sd 1:0:0:2: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>loop: loaded (max 8 devices)
>AppArmor: AppArmor initialized
>audit(1165325135.233:2): AppArmor initialized
>
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>powernow: This module only works with AMD K7 CPUs
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>audit(1165325146.797:3): audit_pid=3029 old=0 by auid=4294967295
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>microcode: CPU0 updated from revision 0x14 to 0x2e, date = 08112004 
>microcode: CPU1 updated from revision 0x14 to 0x2e, date = 08112004 
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver

Actions: View

Attachments on bug 226044: 108343 | 108344 | 108355 | 108356