Attachment 109079 Details for Bug 227551

boot messages

boot.msg (text/plain), 25.40 KB, created by Pavel Nemec on 2006-12-11 07:36:45 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pavel Nemec

Created: 2006-12-11 07:36:45 UTC

Size: 25.40 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.18.2-34-default
>Loaded 23374 symbols from /boot/System.map-2.6.18.2-34-default.
>Symbols match kernel version 2.6.18.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
><4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
><4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
><4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
><4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
><4> BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
><4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
><5>0MB HIGHMEM available.
><5>511MB LOWMEM available.
><6>found SMP MP-table at 000f5710
><7>On node 0 totalpages: 131056
><7>  DMA zone: 4096 pages, LIFO batch:0
><7>  Normal zone: 126960 pages, LIFO batch:31
><6>DMI 2.3 present.
><6>Using APIC driver default
><6>IO/L-APIC allowed because system is MP or new enough
><7>ACPI: RSDP (v000 Nvidia                                ) @ 0x000f77b0
><7>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
><7>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff30c0
><7>ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff96c0
><7>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff9600
><7>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
><6>Nvidia board detected. Ignoring ACPI timer override.
><6>If you got timer trouble try acpi_use_timer_override
><6>Nvidia board detected. Ignoring ACPI timer override.
><6>If you got timer trouble try acpi_use_timer_override
><6>Nvidia board detected. Ignoring ACPI timer override.
><6>If you got timer trouble try acpi_use_timer_override
><6>Nvidia board detected. Ignoring ACPI timer override.
><6>If you got timer trouble try acpi_use_timer_override
><6>Nvidia board detected. Ignoring ACPI timer override.
><6>If you got timer trouble try acpi_use_timer_override
><6>ACPI: PM-Timer IO Port: 0x4008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><4>Processor #0 15:12 APIC version 16
><6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><4>ACPI: BIOS IRQ0 pin2 override ignored.
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
><7>ACPI: IRQ9 used by override.
><7>ACPI: IRQ14 used by override.
><7>ACPI: IRQ15 used by override.
><4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
><6>Using ACPI (MADT) for SMP configuration information
><4>Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
><4>Detected 1809.299 MHz processor.
><4>Built 1 zonelists.  Total pages: 131056
><5>Kernel command line: root=/dev/hdb1 vga=0x31a resume=/dev/hdb3 splash=silent
><6>bootsplash: silent mode.
><7>mapped APIC to ffffd000 (fee00000)
><7>mapped IOAPIC to ffffc000 (fec00000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 2048 (order: 11, 8192 bytes)
><7>spurious 8259A interrupt: IRQ7.
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
><4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
><6>Memory: 512552k/524224k available (1697k kernel code, 11076k reserved, 968k data, 196k init, 0k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 3620.86 BogoMIPS (lpj=7241736)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
><7>CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 128K (64 bytes/line)
><7>CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><4>Compat vDSO mapped to ffffe000.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 16k freed
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 3250k freed
><6>ACPI: Core revision 20060707
><4>CPU0: AMD Sempron(tm) Processor 3000+ stepping 02
><6>Total of 1 processors activated (3620.86 BogoMIPS).
><4>ENABLING IO-APIC IRQs
><6>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
><6>Brought up 1 CPUs
><4>migration_cost=0
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: Using MMCONFIG
><5>PCI: No mmconfig possible on 0:18
><4>Setting up standard PCI resources
><6>ACPI: Interpreter enabled
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><6>PCI: Transparent bridge - 0000:00:09.0
><7>Boot video device is 0000:01:00.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
><4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15)
><4>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
><4>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *11
><4>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *12
><4>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
><4>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
><4>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
><4>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 14 devices
><6>PnPBIOS: Disabled by ACPI PNP
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><3>PCI: Cannot allocate resource region 1 of device 0000:00:0a.0
><3>PCI: Cannot allocate resource region 1 of device 0000:01:00.0
><3>PCI: Cannot allocate resource region 5 of device 0000:01:00.0
><6>pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
><6>pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
><6>pnp: 00:01: ioport range 0x4400-0x447f has been reserved
><6>pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
><6>pnp: 00:01: ioport range 0x4800-0x487f has been reserved
><6>pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
><3>PCI: Error while updating region 0000:00:0a.0/1 (00002001 != 0000e001)
><6>PCI: Bridge: 0000:00:09.0
><6>  IO window: d000-dfff
><6>  MEM window: d3000000-d4ffffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:0b.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:0c.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:0d.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><4>PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
><3>PCI: Failed to allocate mem resource #1:40000000@c0000000 for 0000:01:00.0
><3>PCI: Failed to allocate I/O resource #5:4000@c000 for 0000:01:00.0
><6>PCI: Bridge: 0000:00:0e.0
><6>  IO window: c000-cfff
><6>  MEM window: d0000000-d2ffffff
><6>  PREFETCH window: c0000000-cfffffff
><7>PCI: Setting latency timer of device 0000:00:09.0 to 64
><7>PCI: Setting latency timer of device 0000:00:0b.0 to 64
><7>PCI: Setting latency timer of device 0000:00:0c.0 to 64
><7>PCI: Setting latency timer of device 0000:00:0d.0 to 64
><7>PCI: Setting latency timer of device 0000:00:0e.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
><4>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
><4>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
><6>TCP: Hash tables configured (established 16384 bind 8192)
><6>TCP reno registered
><6>Machine check exception polling timer started.
><6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
><5>apm: overridden by ACPI.
><6>audit: initializing netlink socket (disabled)
><5>audit(1165675835.736:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>PCI: Setting latency timer of device 0000:00:0b.0 to 64
><4>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:0b.0:pcie00]
><7>Allocate Port Service[0000:00:0b.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:0c.0 to 64
><4>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:0c.0:pcie00]
><7>Allocate Port Service[0000:00:0c.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:0d.0 to 64
><4>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:0d.0:pcie00]
><7>Allocate Port Service[0000:00:0d.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:0e.0 to 64
><4>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:0e.0:pcie00]
><7>Allocate Port Service[0000:00:0e.0:pcie03]
><6>vesafb: framebuffer at 0xc0000000, mapped to 0xe0880000, using 10240k, total 262144k
><6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
><6>vesafb: protected mode interface info at c000:c7d0
><6>vesafb: pmi: set display start = c00cc806, set palette = c00cc870
><6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 59769 bytes, v3).
><4>Console: switching to colour frame buffer device 156x60
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
><6>PNP: No PS/2 controller found. Probing ports directly.
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>mice: PS/2 mouse device common for all mice
><6>input: PC Speaker as /class/input/input0
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>NET: Registered protocol family 1
><4>Using IPI No-Shortcut mode
><6>ACPI: (supports S0 S1 S4 S5)
><6>Freeing unused kernel memory: 196k freed
><6>Time: tsc clocksource has been installed.
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><5>SCSI subsystem initialized
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><6>ACPI: Thermal Zone [THRM] (40 C)
><6>NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
><6>NFORCE-CK804: chipset revision 242
><6>NFORCE-CK804: not 100% native mode: will probe irqs later
><4>NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
><6>NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
><6>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
><6>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
><7>Probing IDE interface ide0...
><4>hda: Maxtor 6Y120P0, ATA DISK drive
><4>hdb: WDC WD600JB-00CRA1, ATA DISK drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><6>hda: max request size: 128KiB
><6>hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
><6>hda: cache flushes supported
><6> hda: hda1 hda2
><6>hdb: max request size: 128KiB
><6>hdb: 117231408 sectors (60022 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
><6>hdb: cache flushes not supported
><6> hdb: hdb1 hdb2 hdb3 hdb4
><7>Probing IDE interface ide1...
><4>hdc: Maxtor 6Y120P0, ATA DISK drive
><4>ide1 at 0x170-0x177,0x376 on irq 15
><6>hdc: max request size: 128KiB
><6>hdc: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
><6>hdc: cache flushes supported
><6> hdc: hdc1 hdc2
><7>libata version 2.00 loaded.
><6>ACPI: Fan [FAN] (on)
><6>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
><4>Attempting manual resume
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on hdb1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><4>JBD: barrier-based sync failed on hdb1 - disabling barriers
><6>parport: PnPBIOS parport detected.
><6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
><6>lp0: using parport0 (interrupt-driven).
><6>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
><6>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
><6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
><4>ACPI: PCI Interrupt Link [APCH] BIOS reported IRQ 0, using IRQ 23
><4>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
><6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217
><7>PCI: Setting latency timer of device 0000:00:0a.0 to 64
><6>forcedeth: Couldn't find register window for device 0000:00:0a.0.
><6>ACPI: PCI interrupt for device 0000:00:0a.0 disabled
><4>forcedeth: probe of 0000:00:0a.0 failed with error -22
><6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217
><7>PCI: Setting latency timer of device 0000:00:0a.0 to 64
><6>forcedeth: Couldn't find register window for device 0000:00:0a.0.
><6>ACPI: PCI interrupt for device 0000:00:0a.0 disabled
><4>forcedeth: probe of 0000:00:0a.0 failed with error -22
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
><4>ACPI: PCI Interrupt Link [APCF] disabled and referenced, BIOS bug
><4>ACPI: PCI Interrupt Link [APCF] BIOS reported IRQ 0, using IRQ 22
><4>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
><6>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 225
><6>ACPI: PCI interrupt for device 0000:00:02.0 disabled
><3>ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -16
><4>ohci_hcd: probe of 0000:00:02.0 failed with error -16
><4>ACPI: PCI Interrupt Link [APCL] disabled and referenced, BIOS bug
><4>ACPI: PCI Interrupt Link [APCL] BIOS reported IRQ 0, using IRQ 21
><4>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
><6>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 233
><6>ACPI: PCI interrupt for device 0000:00:02.1 disabled
><3>ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -16
><4>ehci_hcd: probe of 0000:00:02.1 failed with error -16
><4>Emu10k1_gameport: probe of 0000:05:08.1 failed with error -16
><6>Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
><4>ACPI: PCI Interrupt Link [APC2] BIOS reported IRQ 11, using IRQ 17
><4>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
><6>ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 50
><3>tulip: 0000:05:07.0: I/O region (0x0@0x0) too small, aborting
><6>gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 877kHz
><7>ieee1394: Initialized config rom entry `ip1394'
><4>ACPI: PCI Interrupt Link [APC4] disabled and referenced, BIOS bug
><4>ACPI: PCI Interrupt Link [APC4] BIOS reported IRQ 0, using IRQ 19
><4>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
><6>ACPI: PCI Interrupt 0000:05:08.2[B] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 58
><4>ohci1394: fw-host0: PCI resource length of 0x0 too small!
><3>ohci1394: MMIO resource (0x0 - 0x800) unavailable
><4>ohci1394: probe of 0000:05:08.2 failed with error -12
><4>ACPI: PCI Interrupt Link [APC3] BIOS reported IRQ 12, using IRQ 18
><4>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
><6>ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66
><6>ALSA sound/pci/emu10k1/emufx.c:1435: Installing spdif_bug patch: Audigy 2 Platinum [SB0240P]
><4>ALSA sound/pci/ac97/ac97_codec.c:1923: AC'97 0 does not respond - RESET
><3>ALSA sound/pci/ac97/ac97_codec.c:1932: AC'97 0 access is not valid [0xffffffff], removing mixer.
><6>ACPI: PCI interrupt for device 0000:05:08.0 disabled
><4>EMU10K1_Audigy: probe of 0000:05:08.0 failed with error -5
><6>Adding 2104504k swap on /dev/hdb3.  Priority:-1 extents:1 across:2104504k
><4>JBD: barrier-based sync failed on hdb1 - disabling barriers
><6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
><4>JBD: barrier-based sync failed on hdb1 - disabling barriers
><6>loop: loaded (max 8 devices)
><5>ReiserFS: hdb2: found reiserfs format "3.6" with standard journal
><5>ReiserFS: hdb2: using ordered data mode
><4>reiserfs: using flush barriers
><5>ReiserFS: hdb2: journal params: device hdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: hdb2: checking transaction log (hdb2)
><4>reiserfs: disabling flush barriers on hdb2
><5>ReiserFS: hdb2: Using r5 hash to sort names
><5>ReiserFS: hdc1: found reiserfs format "3.6" with standard journal
><5>ReiserFS: hdc1: using ordered data mode
><4>reiserfs: using flush barriers
><5>ReiserFS: hdc1: journal params: device hdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: hdc1: checking transaction log (hdc1)
><5>ReiserFS: hdc1: Using r5 hash to sort names
><5>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
><5>ReiserFS: hda2: using ordered data mode
><4>reiserfs: using flush barriers
><5>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: hda2: checking transaction log (hda2)
><5>ReiserFS: hda2: Using r5 hash to sort names
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on hdb4, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>AppArmor: AppArmor initialized
><5>audit(1165675863.889:2): AppArmor initialized
><4>
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Sat Dec  9 14:50:37 2006
>
>Trying manual resume from /dev/hdb3
>Creating device nodes with udev
>Loading ide-core
>Loading ide-disk
>Loading scsi_mod
>Loading sd_mod
>Loading processor
>Loading thermal
>Loading amd74xx
>Loading libata
>Loading sata_nv
>Loading fan
>Loading edd
>Loading jbd
>Loading mbcache
>Loading ext3
>Invoking userspace resume from /dev/hdb3
>resume: Could not stat configuration file
>resume: libgcrypt version: 1.2.3
>resume: Could not read the image
>Invoking in-kernel resume from /dev/hdb3
>Waiting for device /dev/hdb1 to appear:  ok
>fsck 1.39 (29-May-2006)
>[/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/hdb1 
>/dev/hdb1: Superblock last mount time is in the future.  FIXED.
>/dev/hdb1: clean, 170511/1313280 files, 888765/2621440 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/hdb1
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Sat Dec  9 15:50:41 2006
>
><notice>boot.udev start
>Starting udevd done
><notice>'boot.udev start' exits with status 0
><notice>boot.rootfsck start
>Activating swap-devices in /etc/fstab...
>done<notice>'boot.rootfsck start' exits with status 0
><notice>boot.loadmodules start
>Loading required kernel modules
>done<notice>'boot.loadmodules start' exits with status 0
><notice>boot.preload_early start
>done
><notice>'boot.preload_early start' exits with status 0
><notice>boot.scpm start
><notice>'boot.scpm start' exits with status 0
><notice>boot.device-mapper start
>Activating device mapper...
>done
><notice>'boot.device-mapper start' exits with status 0
><notice>boot.md start
>Starting MD Raid done
><notice>'boot.md start' exits with status 0
><notice>boot.lvm start
>Waiting for udev to settle...
>Scanning for LVM volume groups...
>  Reading all physical volumes.  This may take a while...
>  No volume groups found
>  No volume groups found
>Activating LVM volume groups...
>  No volume groups found
>done
><notice>'boot.lvm start' exits with status 0
><notice>boot.localfs start
>Checking file systems...
>fsck 1.39 (29-May-2006)
>Reiserfs super block in block 16 on 0x342 of format 3.6 with standard journal
>Blocks (total/free): 2752464/761439 by 4096 bytes
>Filesystem is clean
>Replaying journal..
>Reiserfs journal '/dev/hdb2' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..finished
>Reiserfs super block in block 16 on 0x1601 of format 3.6 with standard journal
>Blocks (total/free): 15729632/3449306 by 4096 bytes
>Filesystem is clean
>Replaying journal..
>Reiserfs journal '/dev/hdc1' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..finished
>Reiserfs super block in block 16 on 0x302 of format 3.6 with standard journal
>Blocks (total/free): 29766432/20221664 by 4096 bytes
>Filesystem is clean
>Replaying journal..
>Reiserfs journal '/dev/hda2' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..finished
>/dev/hdb4: Superblock last mount time is in the future.  FIXED.
>/dev/hdb4: clean, 3964/4267872 files, 4659464/8530515 blocks
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/hdb2 on /1010 type reiserfs (rw)
>/dev/hdc1 on /data type reiserfs (rw)
>/dev/hda2 on /home type reiserfs (rw)
>/dev/hdb4 on /zalohy type ext3 (rw)
>done<notice>'boot.localfs start' exits with status 0
><notice>boot.apparmor start
>Loading AppArmor module done
>Mounting securityfs on /sys/kernel/security done
>Loading AppArmor profiles done
><notice>'boot.apparmor start' exits with status 0
><notice>boot.cleanup start
><notice>'boot.cleanup start' exits with status 0
><notice>boot.clock start
>Setting up the hardware clockdone
><notice>'boot.clock start' exits with status 0
><notice>boot.klog start
>Creating /var/log/boot.msg
>done<notice>killproc: kill(947,29)
><notice>'boot.klog start' exits with status 0
><notice>boot.proc start
><notice>'boot.proc start' exits with status 0
><notice>boot.sysctl start
>Setting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>done
><notice>'boot.sysctl start' exits with status 0
><notice>boot.udev_retry start
><notice>'boot.udev_retry start' exits with status 0
><notice>boot.videobios start
><notice>'boot.videobios start' exits with status 0
><notice>boot.crypto start
>Activating crypto devices using /etc/cryptotab ... 
>Please enter passphrase for /dev/hdc2: Please enter passphrase for /dev/hdc2: Please enter passphrase for /dev/hdc2: Please enter passphrase for /dev/hdc2: Please enter passphrase for /dev/hdc2: Please enter passphrase for /dev/hdc2: Please enter passphrase for /dev/hdc2: Please enter passphrase for /dev/hdc2: Please enter passphrase for /dev/hdc2: Please enter passphrase for /dev/hdc2: Please enter passphrase for /dev/hdc2: Please enter passphrase for /dev/hdc2:

Actions: View

Attachments on bug 227551: 109079 | 109082 | 112030