Attachment 109720 Details for Bug 228299

pot file of yast2-storage

storage.pot (text/plain), 169.64 KB, created by Thomas Fehr on 2006-12-14 12:42:08 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thomas Fehr

Created: 2006-12-14 12:42:08 UTC

Size: 169.64 KB

patch

obsolete

># SOME DESCRIPTIVE TITLE.
># Copyright (C) YEAR SuSE Linux Products GmbH, Nuernberg
># This file is distributed under the same license as the PACKAGE package.
># FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
>#
>#, fuzzy
>msgid ""
>msgstr ""
>"Project-Id-Version: PACKAGE VERSION\n"
>"Report-Msgid-Bugs-To: \n"
>"POT-Creation-Date: 2006-12-14 13:41+0100\n"
>"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
>"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
>"Language-Team: LANGUAGE <LL@li.org>\n"
>"MIME-Version: 1.0\n"
>"Content-Type: text/plain; charset=CHARSET\n"
>"Content-Transfer-Encoding: 8bit\n"
>
>#. help text
>#: controller/src/controller.ycp:36
>msgid ""
>"<big>Disk Controller Configuration</big>\n"
>"Here, configure disk controllers by modifying the corresponding kernel module.\n"
>"The table at top contains the controllers to configure. If\n"
>"there is more than one controller, select the controller\n"
>"by clicking a line in the table. The order in the table determines\n"
>"the order in which kernel modules are loaded. Use Move Up and\n"
>"Move Down to change the order.\n"
>"\n"
>"Module to Use selects the kernel module to use for the current controller. Alternative modules are available for some controllers.\n"
>"The module status is shown in Module Currently Loaded.\n"
>"With Load Module in initrd set whether the module should be\n"
>"loaded during boot.\n"
>"For Module Parameters, enter any parameters for the module.\n"
>"This is often not needed.\n"
>"Test Loading of Module tests whether the module can be loaded with the specified parameters. This test is recommended if you have made changes.\n"
>msgstr ""
>
>#. label text
>#: controller/src/controller.ycp:58
>msgid "&Module to Use"
>msgstr ""
>
>#. button text, initrd should be left as-is
>#: controller/src/controller.ycp:65
>msgid "&Load Module in initrd"
>msgstr ""
>
>#. label text
>#: controller/src/controller.ycp:91 controller/src/controller.ycp:285
>#: controller/src/controller.ycp:401 storage/src/include/raid_ui.ycp:260
>#: storage/src/include/raid_ui.ycp:329
>msgid "Yes"
>msgstr ""
>
>#. label text
>#: controller/src/controller.ycp:91 controller/src/controller.ycp:295
>#: storage/src/include/raid_ui.ycp:329
>msgid "No"
>msgstr ""
>
>#. error popup text; stderr=standard error
>#: controller/src/controller.ycp:227
>#, ycp-format
>msgid ""
>"\n"
>"Error loading module.\n"
>"Executed command was:\n"
>" %1\n"
>"\n"
>"stderr was:\n"
>"%2\n"
>msgstr ""
>
>#. popup text, %1=module name
>#: controller/src/controller.ycp:242
>#, ycp-format
>msgid "Module %1 loaded successfully."
>msgstr ""
>
>#. table heading text
>#: controller/src/controller.ycp:385
>msgid "Disk Controller"
>msgstr ""
>
>#: controller/src/controller.ycp:385
>msgid "New"
>msgstr ""
>
>#. button text
>#: controller/src/controller.ycp:389
>msgid "Move &Up"
>msgstr ""
>
>#. button text
>#: controller/src/controller.ycp:392
>msgid "Move &Down"
>msgstr ""
>
>#. provides Yes or No status info
>#: controller/src/controller.ycp:399
>msgid "Module Currently Loaded:"
>msgstr ""
>
>#. label text
>#: controller/src/controller.ycp:406
>msgid "Module &Parameters"
>msgstr ""
>
>#. button text
>#: controller/src/controller.ycp:409
>msgid "&Test Loading of Module"
>msgstr ""
>
>#. popup text
>#: controller/src/controller.ycp:416
>msgid "No configurable controller found."
>msgstr ""
>
>#. heading text
>#: controller/src/controller.ycp:421
>msgid "Disk Controller Configuration"
>msgstr ""
>
>#. busy popup text, mkinitrd is a case-sensitive command
>#: controller/src/controller.ycp:589
>msgid "Executing mkinitrd..."
>msgstr ""
>
>#. popup text
>#: controller/src/controller.ycp:596
>msgid ""
>"Executing mkinitrd failed.\n"
>"Try executing /sbin/mkinitrd manually and checking the error messages.\n"
>msgstr ""
>
>#. popup text
>#: controller/src/controller.ycp:627
>msgid ""
>"You have unsaved changes.\n"
>"These changes will be lost if you abort now.\n"
>"\n"
>"Discard changes?\n"
>msgstr ""
>
>#: disk/src/disk.ycp:35
>msgid ""
>"Only use this program if you are familiar with partitioning hard disks.\n"
>"\n"
>"Never partition disks that may, in any way, be in use\n"
>"(mounted, swap, etc.) unless you know exactly what you are\n"
>"doing. Otherwise, the partitioning table will not be forwarded to the\n"
>"kernel, which would most likely lead to data loss.\n"
>"\n"
>"To continue despite this warning, click Yes.\n"
>msgstr ""
>
>#. popup headline
>#: disk/src/disk.ycp:47
>msgid "Warning"
>msgstr ""
>
>#. translators: command line help text for disk module
>#: disk/src/disk.ycp:60
>msgid "Disk partitioner"
>msgstr ""
>
>#. custum help text (should replace default one)
>#: disk/src/disk.ycp:62
>msgid "Command line interface for the partitioner module is not available"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#: libstorage/src/Container.cc:172 libstorage/src/Volume.cc:2025
>#, c-format
>msgid "Creating %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#: libstorage/src/Container.cc:177 libstorage/src/Volume.cc:2030
>#, c-format
>msgid "Create %1$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#. displayed text during action, %1$s is replaced by a name (e.g. pdc_igeeeadj),
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#: libstorage/src/Container.cc:188 libstorage/src/DmPartCo.cc:885
>#: libstorage/src/Volume.cc:2072
>#, c-format
>msgid "Removing %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. displayed text before action, %1$s is replaced by a name (e.g. pdc_igeeeadj),
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#: libstorage/src/Container.cc:193 libstorage/src/DmPartCo.cc:890
>#: libstorage/src/Volume.cc:2077
>#, c-format
>msgid "Remove %1$s"
>msgstr ""
>
>#: libstorage/src/Dasd.cc:207
>#, c-format
>msgid ""
>"The partitioning on disk %1$s is not readable by\n"
>"the partitioning tool fdasd, which is used to change the\n"
>"partition table.\n"
>"\n"
>"You can use the partitions on disk %1$s as they are.\n"
>"You can format them and assign mount points to them, but you\n"
>"cannot add, edit, resize, or remove partitions from that\n"
>"disk with this tool."
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by disk name (e.g. /dev/dasda),
>#: libstorage/src/Dasd.cc:356
>#, c-format
>msgid "Executing fdasd for disk %1$s..."
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by disk name (e.g. dasda),
>#: libstorage/src/Dasd.cc:454
>#, c-format
>msgid "Executing dasdfmt for disk %1$s..."
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by list of disk names (e.g. dasda dasdb dasdc),
>#: libstorage/src/Dasd.cc:459
>#, c-format
>msgid "Executing dasdfmt for disks: %1$s..."
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by disk name (e.g. /dev/dasda),
>#: libstorage/src/Dasd.cc:474
>#, c-format
>msgid "Execute dasdfmt on disk %1$s"
>msgstr ""
>
>#: libstorage/src/Disk.cc:398
>#, c-format
>msgid ""
>"The partition table type on disk %1$s cannot be handled by\n"
>"this tool.\n"
>"\n"
>"You can use the partitions on disk %1$s as they are.\n"
>"You can format them and assign mount points to them, but you\n"
>"cannot add, edit, resize, or remove partitions from that\n"
>"disk with this tool."
>msgstr ""
>
>#: libstorage/src/Disk.cc:757
>#, c-format
>msgid ""
>"The partitioning on disk %1$s is not readable by\n"
>"the partitioning tool parted, which is used to change the\n"
>"partition table.\n"
>"\n"
>"You can use the partitions on disk %1$s as they are.\n"
>"You can format them and assign mount points to them, but you\n"
>"cannot add, edit, resize, or remove partitions from that\n"
>"disk with this tool."
>msgstr ""
>
>#: libstorage/src/Disk.cc:774
>#, c-format
>msgid ""
>"Your disk %1$s contains %2$lu partitions. The maximum number\n"
>"of partitions that the kernel driver of the disk can handle is %3$lu.\n"
>"Partitions numbered above %3$lu cannot be accessed."
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by disk name (e.g. /dev/hda),
>#. %2$s is replaced by label name (e.g. msdos)
>#: libstorage/src/Disk.cc:1702
>#, c-format
>msgid "Setting disk label of disk %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by disk name (e.g. /dev/hda),
>#. %2$s is replaced by label name (e.g. msdos)
>#: libstorage/src/Disk.cc:1709
>#, c-format
>msgid "Set disk label of disk %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/mapper/system
>#: libstorage/src/Dm.cc:349
>#, c-format
>msgid "Deleting device mapper volume %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/mapper/system
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Dm.cc:355
>#, c-format
>msgid "Delete device mapper volume %1$s (%2$s)"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/mapper/system
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Dm.cc:369
>#, c-format
>msgid "Formatting device mapper volume %1$s (%2$s) with %3$s "
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/mapper/system
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Dm.cc:382
>#, c-format
>msgid "Format device mapper volume %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/mapper/system
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Dm.cc:392
>#, c-format
>msgid "Format encrypted device mapper volume %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/mapper/system
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Dm.cc:402
>#, c-format
>msgid "Format device mapper volume %1$s (%2$s) with %3$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by partition name (e.g. pdc_dabaheedj1),
>#. %2$s is replaced by hexadecimal number (e.g. 8E)
>#. displayed text during action, %1$s is replaced by partition name (e.g. /dev/hda1),
>#. %2$s is replaced by hexadecimal number (e.g. 8E)
>#: libstorage/src/DmPart.cc:117 libstorage/src/Partition.cc:250
>#, c-format
>msgid "Setting type of partition %1$s to %2$X"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by partition name (e.g. pdc_dabaheedj1),
>#. %2$s is replaced by hexadecimal number (e.g. 8E)
>#. displayed text before action, %1$s is replaced by partition name (e.g. /dev/hda1),
>#. %2$s is replaced by hexadecimal number (e.g. 8E)
>#: libstorage/src/DmPart.cc:124 libstorage/src/Partition.cc:257
>#, c-format
>msgid "Set type of partition %1$s to %2$X"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by name (e.g. pdc_igeeeadj),
>#. %2$s is replaced by label name (e.g. msdos)
>#: libstorage/src/DmPartCo.cc:866
>#, c-format
>msgid "Setting disk label of %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by name (e.g. pdc_igeeeadj),
>#. %2$s is replaced by label name (e.g. msdos)
>#: libstorage/src/DmPartCo.cc:873
>#, c-format
>msgid "Set disk label of %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by raid partition name e.g. pdc_dabaheedj1
>#: libstorage/src/Dmraid.cc:37
>#, c-format
>msgid "Deleting raid partition %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by raid partition name e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Dmraid.cc:43
>#, c-format
>msgid "Delete raid partition %1$s (%2$s)"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by raid partition name e.g. pdc_dabaheedj1
>#: libstorage/src/Dmraid.cc:56
>#, c-format
>msgid "Creating raid partition %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Dmraid.cc:64
>#, c-format
>msgid "Create swap raid partition %1$s (%2$s)"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Dmraid.cc:75
>#, c-format
>msgid "Create raid partition %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Dmraid.cc:85
>#, c-format
>msgid "Create encrypted raid partition %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Dmraid.cc:94
>#, c-format
>msgid "Create extended raid partition %1$s (%2$s)"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Dmraid.cc:101
>#, c-format
>msgid "Create raid partition %1$s (%2$s)"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Dmraid.cc:117
>#, c-format
>msgid "Formatting raid partition %1$s (%2$s) with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Dmraid.cc:128
>#, c-format
>msgid "Format raid partition %1$s (%2$s) for swap"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Dmraid.cc:137
>#, c-format
>msgid "Format raid partition %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Dmraid.cc:147
>#, c-format
>msgid "Format encrypted raid partition %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Dmraid.cc:157
>#, c-format
>msgid "Format raid partition %1$s (%2$s) with %3$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Dmraid.cc:174
>#, c-format
>msgid "Shrinking raid partition %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Dmraid.cc:178
>#, c-format
>msgid "Extending raid partition %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Dmraid.cc:186
>#, c-format
>msgid "Shrink raid partition %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by raid partition e.g. pdc_dabaheedj1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Dmraid.cc:190
>#, c-format
>msgid "Extend raid partition %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by partition name (e.g. pdc_dabaheedj1),
>#. %2$s is replaced by hexadecimal number (e.g. 8E)
>#: libstorage/src/Dmraid.cc:204
>#, c-format
>msgid "Setting type of raid partition %1$s to %2$X"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by partition name (e.g. pdc_dabaheedj1),
>#. %2$s is replaced by hexadecimal number (e.g. 8E)
>#: libstorage/src/Dmraid.cc:211
>#, c-format
>msgid "Set type of raid partition %1$s to %2$X"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by a name (e.g. pdc_igeeeadj),
>#: libstorage/src/DmraidCo.cc:131
>#, c-format
>msgid "Removing raid %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by a name (e.g. pdc_igeeeadj),
>#: libstorage/src/DmraidCo.cc:136
>#, c-format
>msgid "Remove raid %1$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by raid name (e.g. pdc_igeeeadj),
>#. %2$s is replaced by label name (e.g. msdos)
>#: libstorage/src/DmraidCo.cc:150
>#, c-format
>msgid "Setting disk label of raid %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by raid name (e.g. pdc_igeeeadj),
>#. %2$s is replaced by label name (e.g. msdos)
>#: libstorage/src/DmraidCo.cc:157
>#, c-format
>msgid "Set disk label of raid %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by mount point e.g. /home
>#. %2$s is replaced by a pathname e.g. /etc/fstab
>#: libstorage/src/EtcFstab.cc:563
>#, c-format
>msgid "Adding entry for mount point %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by mount point e.g. /home
>#. %2$s is replaced by a pathname e.g. /etc/fstab
>#: libstorage/src/EtcFstab.cc:570
>#, c-format
>msgid "Add entry for mount point %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by mount point e.g. /home
>#. %2$s is replaced by a pathname e.g. /etc/fstab
>#: libstorage/src/EtcFstab.cc:584
>#, c-format
>msgid "Updating entry for mount point %1$s in %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by mount point e.g. /home
>#. %2$s is replaced by a pathname e.g. /etc/fstab
>#: libstorage/src/EtcFstab.cc:591
>#, c-format
>msgid "Update entry for mount point %1$s in %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by mount point e.g. /home
>#. %2$s is replaced by a pathname e.g. /etc/fstab
>#: libstorage/src/EtcFstab.cc:605
>#, c-format
>msgid "Removing entry for mount point %1$s from %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by mount point e.g. /home
>#. %2$s is replaced by a pathname e.g. /etc/fstab
>#: libstorage/src/EtcFstab.cc:612
>#, c-format
>msgid "Remove entry for mount point %1$s from %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#: libstorage/src/Evms.cc:113
>#, c-format
>msgid "Deleting EVMS volume %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Evms.cc:119
>#, c-format
>msgid "Delete EVMS volume %1$s (%2$s)"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#: libstorage/src/Evms.cc:131
>#, c-format
>msgid "Creating EVMS volume %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Evms.cc:139
>#, c-format
>msgid "Create swap EVMS volume %1$s (%2$s)"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Evms.cc:150
>#, c-format
>msgid "Create EVMS volume %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Evms.cc:160
>#, c-format
>msgid "Create encrypted EVMS volume %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Evms.cc:169
>#, c-format
>msgid "Create EVMS volume %1$s (%2$s)"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Evms.cc:184
>#, c-format
>msgid "Formatting EVMS volume %1$s (%2$s) with %3$s "
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Evms.cc:195
>#, c-format
>msgid "Format EVMS volume %1$s (%2$s) for swap"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Evms.cc:204
>#, c-format
>msgid "Format EVMS volume %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Evms.cc:214
>#, c-format
>msgid "Format encrypted EVMS volume %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Evms.cc:224
>#, c-format
>msgid "Format EVMS volume %1$s (%2$s) with %3$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Evms.cc:240
>#, c-format
>msgid "Shrinking EVMS volume %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Evms.cc:244
>#, c-format
>msgid "Extending EVMS volume %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Evms.cc:252
>#, c-format
>msgid "Shrink EVMS volume %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/evms/lvm/system/usr
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Evms.cc:256
>#, c-format
>msgid "Extend EVMS volume %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by a name (e.g. lvm2/system),
>#: libstorage/src/EvmsCo.cc:916
>#, c-format
>msgid "Removing container %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by a name (e.g. lvm2/system),
>#: libstorage/src/EvmsCo.cc:921
>#, c-format
>msgid "Remove container %1$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by a name (e.g. lvm2/system),
>#. %2$ is replaced by one or more devices (e.g /dev/sda1 /dev/sda2)
>#: libstorage/src/EvmsCo.cc:934
>#, c-format
>msgid "Creating container %1$s from %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by a name (e.g. lvm2/system),
>#. %2$ is replaced by one or more devices (e.g /dev/sda1 /dev/sda2)
>#: libstorage/src/EvmsCo.cc:941
>#, c-format
>msgid "Create container %1$s from %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by a name (e.g. lvm2/system),
>#. %2$s is replaced by a device name (e.g. /dev/hda1)
>#: libstorage/src/EvmsCo.cc:955
>#, c-format
>msgid "Extending container %1$s with %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by a name (e.g. lvm2/system),
>#. %2$s is replaced by a device name (e.g. /dev/hda1)
>#: libstorage/src/EvmsCo.cc:962
>#, c-format
>msgid "Extend container %1$s with %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by a name (e.g. lvm2/system),
>#. %2$s is replaced by a device name (e.g. /dev/hda1)
>#: libstorage/src/EvmsCo.cc:976
>#, c-format
>msgid "Reducing container %1$s with %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by a name (e.g. lvm2/system),
>#. %2$s is replaced by a device name (e.g. /dev/hda1)
>#: libstorage/src/EvmsCo.cc:983
>#, c-format
>msgid "Reduce container %1$s by %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/loop0
>#: libstorage/src/Loop.cc:164
>#, c-format
>msgid "Deleting file-based loop %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by loop number
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Loop.cc:171
>#, c-format
>msgid "Delete file-based loop %1$s (%2$s)"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/loop0
>#. %2$s is replaced by filename (e.g. /var/adm/secure)
>#: libstorage/src/Loop.cc:185
>#, c-format
>msgid "Creating file-based loop %1$s of file %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by loop number
>#. %2$s is replaced by filename (e.g. /var/adm/secure)
>#. %3$s is replaced by size (e.g. 623.5 MB)
>#. %4$s is replaced by file system type (e.g. reiserfs)
>#. %5$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Loop.cc:199
>#, c-format
>msgid "Create file-based loop %1$s of %2$s (%3$s) as %5$s with %4$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by loop number
>#. %2$s is replaced by filename (e.g. /var/adm/secure)
>#. %3$s is replaced by size (e.g. 623.5 MB)
>#. %4$s is replaced by file system type (e.g. reiserfs)
>#. %5$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Loop.cc:210
>#, c-format
>msgid "Create encrypted file-based loop %1$s of %2$s (%3$s) as %5$s with %4$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by loop number
>#. %2$s is replaced by filename (e.g. /var/adm/secure)
>#. %3$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Loop.cc:220
>#, c-format
>msgid "Create file-based loop %1$s of %2$s (%3$s)"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by filename (e.g. /var/adm/secure)
>#. %3$s is replaced by size (e.g. 623.5 MB)
>#. %4$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Loop.cc:237
>#, c-format
>msgid "Formatting file-based loop %1$s of %2$s (%3$s) with %4$s "
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by loop number
>#. %2$s is replaced by filename (e.g. /var/adm/secure)
>#. %3$s is replaced by size (e.g. 623.5 MB)
>#. %4$s is replaced by file system type (e.g. reiserfs)
>#. %5$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Loop.cc:253
>#, c-format
>msgid "Format file-based loop %1$s of %2$s (%3$s) as %5$s with %4$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by loop number
>#. %2$s is replaced by filename (e.g. /var/adm/secure)
>#. %3$s is replaced by size (e.g. 623.5 MB)
>#. %4$s is replaced by file system type (e.g. reiserfs)
>#. %5$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Loop.cc:264
>#, c-format
>msgid "Format encrypted file-based loop %1$s of %2$s (%3$s) as %5$s with %4$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by loop number
>#. %2$s is replaced by filename (e.g. /var/adm/secure)
>#. %3$s is replaced by size (e.g. 623.5 MB)
>#. %4$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Loop.cc:275
>#, c-format
>msgid "Format file-based loop %1$s of %2$s (%3$s) with %4$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/system/var
>#: libstorage/src/LvmLv.cc:63
>#, c-format
>msgid "Deleting logical volume %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/LvmLv.cc:69
>#, c-format
>msgid "Delete logical volume %1$s (%2$s)"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/system/var
>#: libstorage/src/LvmLv.cc:81
>#, c-format
>msgid "Creating logical volume %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/LvmLv.cc:89
>#, c-format
>msgid "Create swap logical volume %1$s (%2$s)"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/LvmLv.cc:100
>#, c-format
>msgid "Create logical volume %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/LvmLv.cc:110
>#, c-format
>msgid "Create encrypted logical volume %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/LvmLv.cc:119
>#, c-format
>msgid "Create logical volume %1$s (%2$s)"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/LvmLv.cc:134
>#, c-format
>msgid "Formatting logical volume %1$s (%2$s) with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/LvmLv.cc:145
>#, c-format
>msgid "Format logical volume %1$s (%2$s) for swap"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/LvmLv.cc:154
>#, c-format
>msgid "Format logical volume %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/LvmLv.cc:164
>#, c-format
>msgid "Format encrypted logical volume %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/LvmLv.cc:174
>#, c-format
>msgid "Format logical volume %1$s (%2$s) with %3$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/LvmLv.cc:190
>#, c-format
>msgid "Shrinking logical volume %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/LvmLv.cc:194
>#, c-format
>msgid "Extending logical volume %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/LvmLv.cc:202
>#, c-format
>msgid "Shrink logical volume %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/system/var
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/LvmLv.cc:206
>#, c-format
>msgid "Extend logical volume %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by a name (e.g. system),
>#: libstorage/src/LvmVg.cc:801
>#, c-format
>msgid "Removing volume group %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by a name (e.g. system),
>#: libstorage/src/LvmVg.cc:806
>#, c-format
>msgid "Remove volume group %1$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by a name (e.g. system),
>#. %2$ is replaced by one or more devices (e.g /dev/sda1 /dev/sda2)
>#: libstorage/src/LvmVg.cc:819
>#, c-format
>msgid "Creating volume group %1$s from %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by a name (e.g. system),
>#. %2$ is replaced by one or more devices (e.g /dev/sda1 /dev/sda2)
>#: libstorage/src/LvmVg.cc:826
>#, c-format
>msgid "Create volume group %1$s from %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by a name (e.g. system),
>#. %2$s is replaced by a device name (e.g. /dev/hda1)
>#: libstorage/src/LvmVg.cc:840
>#, c-format
>msgid "Extending volume group %1$s with %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by a name (e.g. system),
>#. %2$s is replaced by a device name (e.g. /dev/hda1)
>#: libstorage/src/LvmVg.cc:847
>#, c-format
>msgid "Extend volume group %1$s with %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by a name (e.g. system),
>#. %2$s is replaced by a device name (e.g. /dev/hda1)
>#: libstorage/src/LvmVg.cc:861
>#, c-format
>msgid "Reducing volume group %1$s by %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by a name (e.g. system),
>#. %2$s is replaced by a device name (e.g. /dev/hda1)
>#: libstorage/src/LvmVg.cc:868
>#, c-format
>msgid "Reduce volume group %1$s by %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/md0
>#: libstorage/src/Md.cc:380
>#, c-format
>msgid "Deleting software RAID %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. md0
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Md.cc:386
>#, c-format
>msgid "Delete software RAID %1$s (%2$s)"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/md0
>#: libstorage/src/Md.cc:399
>#, c-format
>msgid "Creating software RAID %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. md0
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Md.cc:411
>#, c-format
>msgid "Create software RAID %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. md0
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Md.cc:421
>#, c-format
>msgid "Create encrypted software RAID %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. md0
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Md.cc:430
>#, c-format
>msgid "Create software RAID %1$s (%2$s)"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/md0
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Md.cc:446
>#, c-format
>msgid "Formatting software RAID %1$s (%2$s) with %3$s "
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/md0
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Md.cc:459
>#, c-format
>msgid "Format software RAID %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/md0
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Md.cc:469
>#, c-format
>msgid "Format encrypted software RAID %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/md0
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Md.cc:479
>#, c-format
>msgid "Format software RAID %1$s (%2$s) with %3$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#: libstorage/src/Partition.cc:313
>#, c-format
>msgid "Deleting partition %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Partition.cc:321
>#, c-format
>msgid "Delete Windows partition %1$s (%2$s)"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Partition.cc:328
>#, c-format
>msgid "Delete partition %1$s (%2$s)"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#: libstorage/src/Partition.cc:342
>#, c-format
>msgid "Creating partition %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Partition.cc:350
>#, c-format
>msgid "Create extended partition %1$s (%2$s)"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Partition.cc:357
>#, c-format
>msgid "Create swap partition %1$s (%2$s)"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Partition.cc:365
>#, c-format
>msgid "Create root partition %1$s (%2$s) with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Partition.cc:373
>#, c-format
>msgid "Create boot partition %1$s (%2$s) with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Partition.cc:384
>#, c-format
>msgid "Create partition %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Partition.cc:394
>#, c-format
>msgid "Create encrypted partition %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by hexadecimal number (e.g. 8E)
>#: libstorage/src/Partition.cc:404
>#, c-format
>msgid "Create partition %1$s (%2$s) with id=%3$X"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Partition.cc:411
>#, c-format
>msgid "Create partition %1$s (%2$s)"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Partition.cc:427
>#, c-format
>msgid "Formatting partition %1$s (%2$s) with %3$s "
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Partition.cc:438
>#, c-format
>msgid "Format partition %1$s (%2$s) for swap"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Partition.cc:447
>#, c-format
>msgid "Format partition %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Partition.cc:457
>#, c-format
>msgid "Format encrypted partition %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Partition.cc:467
>#, c-format
>msgid "Format partition %1$s (%2$s) with %3$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Partition.cc:483
>#, c-format
>msgid "Shrinking partition %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Partition.cc:487
>#, c-format
>msgid "Extending partition %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Partition.cc:496
>#, c-format
>msgid "Shrink Windows partition %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Partition.cc:500
>#, c-format
>msgid "Extend Windows partition %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Partition.cc:507
>#, c-format
>msgid "Shrink partition %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Partition.cc:511
>#, c-format
>msgid "Extend partition %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Volume.cc:567
>#, c-format
>msgid "Formatting device %1$s (%2$s) with %3$s "
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Volume.cc:580
>#, c-format
>msgid "Format device %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#. %4$s is replaced by mount point (e.g. /usr)
>#: libstorage/src/Volume.cc:590
>#, c-format
>msgid "Format encrypted device %1$s (%2$s) for %4$s with %3$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#. %3$s is replaced by file system type (e.g. reiserfs)
>#: libstorage/src/Volume.cc:600
>#, c-format
>msgid "Format device %1$s (%2$s) with %3$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by mount point e.g. /home
>#: libstorage/src/Volume.cc:906
>#, c-format
>msgid "Mounting %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#: libstorage/src/Volume.cc:911
>#, c-format
>msgid "Unmounting %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by mount point e.g. /home
>#: libstorage/src/Volume.cc:920
>#, c-format
>msgid "Change mount point of %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by mount point e.g. /home
>#: libstorage/src/Volume.cc:929
>#, c-format
>msgid "Set mount point of %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by "swap"
>#: libstorage/src/Volume.cc:936
>#, c-format
>msgid "Use %1$s as %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by pathname e.g. /etc/fstab
>#: libstorage/src/Volume.cc:946
>#, c-format
>msgid "Remove %1$s from %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#: libstorage/src/Volume.cc:1216
>#, c-format
>msgid "Setting up encrypted loop device on %1$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#: libstorage/src/Volume.cc:1221
>#, c-format
>msgid "Set up encrypted loop device on %1$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by a name e.g. ROOT
>#: libstorage/src/Volume.cc:1529
>#, c-format
>msgid "Setting label on %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by a name e.g. ROOT
>#: libstorage/src/Volume.cc:1535
>#, c-format
>msgid "Set label on %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Volume.cc:2044
>#, c-format
>msgid "Shrinking %1$s to %2$s"
>msgstr ""
>
>#. displayed text during action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Volume.cc:2048
>#, c-format
>msgid "Extending %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Volume.cc:2056
>#, c-format
>msgid "Shrink %1$s to %2$s"
>msgstr ""
>
>#. displayed text before action, %1$s is replaced by device name e.g. /dev/hda1
>#. %2$s is replaced by size (e.g. 623.5 MB)
>#: libstorage/src/Volume.cc:2060
>#, c-format
>msgid "Extend %1$s to %2$s"
>msgstr ""
>
>#. LVM Helptext headline
>#: lvm/src/lvm_config.ycp:82 lvm/src/lvm_config_ui.ycp:420
>msgid "LVM Configuration"
>msgstr ""
>
>#. button text
>#: lvm/src/lvm_config.ycp:88
>msgid "A&pply"
>msgstr ""
>
>#. popup text
>#: lvm/src/lvm_config.ycp:108
>msgid "All the settings were written and are ready to use."
>msgstr ""
>
>#. translators: command line help text for lvm_config module
>#: lvm/src/lvm_config.ycp:119
>msgid "LVM configuration"
>msgstr ""
>
>#. custom help text (should replace default one)
>#: lvm/src/lvm_config.ycp:121
>msgid "Command line interface for the lvm_config module is not available"
>msgstr ""
>
>#. popup text, %1 is device name. %2 is mount point.
>#: lvm/src/lvm_config_ui.ycp:72
>#, ycp-format
>msgid ""
>"Device %1 is already mounted at %2. \n"
>"A mounted file system cannot be added to a volume group."
>msgstr ""
>
>#. rwalter: add example VG for translators
>#. popup text, %1 is volume group, such as ???
>#: lvm/src/lvm_config_ui.ycp:337
>#, ycp-format
>msgid "No space available in the current volume group %1."
>msgstr ""
>
>#. Popup text
>#: lvm/src/lvm_config_ui.ycp:384 storage/src/inst_lvm_lv.ycp:229
>msgid ""
>"No device selected.\n"
>"Select the device to edit.\n"
>msgstr ""
>
>#. Popup text
>#: lvm/src/lvm_config_ui.ycp:406 storage/src/inst_lvm_lv.ycp:249
>msgid ""
>"No device selected.\n"
>"Select the device to remove.\n"
>msgstr ""
>
>#. There is a consistency check for the selection. Next is the message, that
>#. is displayed. The reason is determined within this consistency check and
>#. then the message is passed through this interface transparently
>#: storage/src/include/auto_part_ui.ycp:43
>#, ycp-format
>msgid ""
>"The current selection is invalid:\n"
>"%1"
>msgstr ""
>
>#. This is a warning message that pops up when the selection does not
>#. include a bootable disk region (< 1024 cylinders).
>#: storage/src/include/auto_part_ui.ycp:50
>#, ycp-format
>msgid ""
>"With the current partitioning, your %2 installation\n"
>"cannot be booted directly, because your /boot partition \n"
>"is above cylinder %1.\n"
>msgstr ""
>
>#. list of partition checkboxes: show partition as unassigned
>#. e.g. "1: 2 GB, unassigned"
>#: storage/src/include/auto_part_ui.ycp:65
>#, ycp-format
>msgid "&%1: %2, unassigned"
>msgstr ""
>
>#. we found an unassigned partition which is large enough for a minimal installation
>#: storage/src/include/auto_part_ui.ycp:74
>#, ycp-format
>msgid ""
>"There is free space on the selected disk.\n"
>"Use this for %1?\n"
>msgstr ""
>
>#. Message between the full name of the hard disk to use
>#. and the "Use entire hard disk" button
>#. - please avoid excessively long lines - rather, include a newline
>#: storage/src/include/auto_part_ui.ycp:86
>#, ycp-format
>msgid ""
>"Disk Areas to Use\n"
>"to Install %1\n"
>msgstr ""
>
>#. pushbutton to choose the entire disk, erasing all data on 
>#. the disk this is an easy way to select all partitions on 
>#. the target disk
>#: storage/src/include/auto_part_ui.ycp:98
>msgid "Use &entire hard disk"
>msgstr ""
>
>#. There were no prior partitions on this disk.
>#. No partitions to choose from will be displayed.
>#: storage/src/include/auto_part_ui.ycp:130
>#, ycp-format
>msgid ""
>"There are no partitions on this disk yet.\n"
>"The entire disk will be used for %1."
>msgstr ""
>
>#. popup text
>#: storage/src/include/auto_part_ui.ycp:137
>msgid ""
>"This disk appears to be used by Windows.\n"
>"There is not enough space to install Linux."
>msgstr ""
>
>#. Radio button for using an entire (Windows) partition for Linux
>#: storage/src/include/auto_part_ui.ycp:149
>msgid "&Delete Windows completely"
>msgstr ""
>
>#. Radio button for resizing a (Windows) partition
>#: storage/src/include/auto_part_ui.ycp:153
>msgid "&Shrink Windows partition"
>msgstr ""
>
>#. helptext for semi-automatic partitioning
>#. part 1 of 4
>#: storage/src/include/auto_part_ui.ycp:170
>msgid ""
>"\n"
>"Select where on your hard disk to install &product;.\n"
>"\n"
>msgstr ""
>
>#. helptext, part 2 of 4
>#: storage/src/include/auto_part_ui.ycp:175
>msgid ""
>"\n"
>"You can either use the entire hard disk or one or more of the\n"
>"partitions or free regions shown.\n"
>""
>msgstr ""
>
>#. helptext, part 3 of 4
>#: storage/src/include/auto_part_ui.ycp:180
>msgid ""
>"\n"
>"Notice: If you select a region that is not shown as free, you\n"
>"might loose existing data on your hard disk. This could also affect\n"
>"other operating systems.\n"
>""
>msgstr ""
>
>#. helptext, part 4 of 4
>#: storage/src/include/auto_part_ui.ycp:186
>msgid ""
>"\n"
>"The marked regions will be deleted. All data there will be\n"
>"lost. There will be no way to recover this data.\n"
>"\n"
>msgstr ""
>
>#. Information what to do, background information
>#: storage/src/include/auto_part_ui.ycp:193
>#: storage/src/include/auto_part_ui.ycp:242
>msgid "Preparing Hard Disk -- Step 2"
>msgstr ""
>
>#. Frame title for installation target hard disk / partition(s)
>#: storage/src/include/auto_part_ui.ycp:198
>#: storage/src/include/auto_part_ui.ycp:246
>msgid "Installing on:"
>msgstr ""
>
>#. helptext for semi-automatic partitioning
>#. part 1 of 2
>#: storage/src/include/auto_part_ui.ycp:227
>msgid ""
>"\n"
>"The selected hard disk is probably used by Windows. There is not enough\n"
>"space for &product;. You can either delete Windows completely or\n"
>"shrink it to get enough free space.\n"
>""
>msgstr ""
>
>#. helptext, part 2 of 2
>#: storage/src/include/auto_part_ui.ycp:233
>msgid ""
>"\n"
>"If you delete Windows, all data on this partition will be irreversibly\n"
>"lost in the installation. When shrinking Windows, we strongly\n"
>"recommend a data backup, because the data must be reorganized.\n"
>"This may fail under rare circumstances.\n"
>"\n"
>msgstr ""
>
>#. Label text
>#: storage/src/include/auto_part_ui.ycp:274
>msgid "Propose Separate &Home Partition"
>msgstr ""
>
>#. Label text
>#. Radiobutton for partition dialog
>#: storage/src/include/auto_part_ui.ycp:280
>#: storage/src/inst_part_proposal.ycp:97
>msgid "Create &LVM Based Proposal"
>msgstr ""
>
>#. Label text
>#. Radiobutton for partition dialog
>#: storage/src/include/auto_part_ui.ycp:285
>#: storage/src/inst_part_proposal.ycp:99
>msgid "Create &EVMS Based Proposal"
>msgstr ""
>
>#: storage/src/include/auto_part_ui.ycp:288
>msgid "Proposal type"
>msgstr ""
>
>#. popup text %2 is a disk name e.g. /dev/hda %1 is a number
>#: storage/src/include/custom_part_check_generated.ycp:360
>#, ycp-format
>msgid ""
>"You have created a partition at the beginning of the disk %2.\n"
>"This is not compatible with the bootloader.\n"
>"Change the start cylinder of your partition to cylinder %1\n"
>"or delete this partition"
>msgstr ""
>
>#. popup text %2 is a disk name e.g. /dev/hda %1 is a number
>#: storage/src/include/custom_part_check_generated.ycp:374
>#, ycp-format
>msgid ""
>"You have a partition at the beginning of disk %2.\n"
>"This is not compatible with the bootloader.\n"
>"You should delete this partition and create a\n"
>"new partition starting at cylinder %1.\n"
>"\n"
>"Do you want to change your partitioning?\n"
>msgstr ""
>
>#. popup text %2 is a disk name e.g. /dev/hda %1 is a number
>#: storage/src/include/custom_part_check_generated.ycp:388
>#, ycp-format
>msgid ""
>"The disk label type on your system disk is GPT.\n"
>"Linux can handle a GPT partition table fine, but most BIOS\n"
>"versions cannot handle the disk label. To remove the GPT\n"
>"disk label from a disk, use the menu entry\n"
>"\"%1\" of the \"%2\" button.\n"
>"\n"
>"Change your partitioning?\n"
>msgstr ""
>
>#: storage/src/include/custom_part_check_generated.ycp:396
>msgid "Delete partition &table and disk label"
>msgstr ""
>
>#. main dialog: Menu-Button for Expert options
>#: storage/src/include/custom_part_check_generated.ycp:397
>#: storage/src/inst_custom_part.ycp:2581
>msgid "E&xpert.."
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:406
>msgid ""
>"\n"
>"YaST2 needs a root partition to install.\n"
>"Assign the root mount point \"/\" to a partition.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:419
>msgid ""
>"You tried to mount a fat partition to\n"
>"one of the following mount points: / /usr /home /opt /var.\n"
>"Use a Linux file system, such as ext2 or reiserfs, for these mount points.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:430
>msgid ""
>"You tried to mount a fat partition to mount point /boot.\n"
>"Use a Linux file system, such as ext2 or reiserfs, for this mount point.\n"
>msgstr ""
>
>#. popup text %1 is a number
>#: storage/src/include/custom_part_check_generated.ycp:442
>#, ycp-format
>msgid ""
>"Warning:\n"
>"Your boot partition ends above cylinder %1.\n"
>"Your BIOS does not seem able to boot\n"
>"partitions above cylinder %1.\n"
>"With the current setup, your %2\n"
>"installation might not be directly bootable.\n"
>"\n"
>"Change this?\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:460
>#, ycp-format
>msgid ""
>"Warning:\n"
>"With the current setup, your %1\n"
>"installation might not be directly bootable.\n"
>"Some PROM versions have problems with a boot\n"
>"partition with an end cylinder above 1 GB.\n"
>"\n"
>"Change this?\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:477
>msgid ""
>"Warning:\n"
>"Your boot partition is less than 12MB.\n"
>"It is recommended to increase the size of /boot.\n"
>"\n"
>"Do you want to do this?\n"
>msgstr ""
>
>#. popup text
>#. If the user chooses 'no' here, the system will not be able to
>#. boot from the hard drive!
>#: storage/src/include/custom_part_check_generated.ycp:500
>msgid ""
>"Warning: There is no partition mounted as /boot.\n"
>"To boot from your hard disk, a small /boot partition\n"
>"(approx. 4MB) is required. Consider creating one.\n"
>"(Partitions assigned to /boot will automatically be changed to\n"
>"type 0x41 PReP/CHRP).\n"
>"\n"
>"Do you want to change your setup?\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:518
>#, ycp-format
>msgid ""
>"Warning: According to your setup, you intend to\n"
>"boot your machine from the root partition (/), which, unfortunately,\n"
>"has an end cylinder above %1. Your BIOS does not seem capable\n"
>"of booting partitions beyond the %1 cylinder boundary,\n"
>"which means your %2 installation will not be\n"
>"directly bootable.\n"
>"\n"
>"Change this?\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:534
>#: storage/src/include/custom_part_check_generated.ycp:549
>#, ycp-format
>msgid ""
>"Warning: With your current setup, your %1\n"
>"installation might not be directly bootable, because\n"
>"some PROM versions have problems with a boot partition\n"
>"ending above the 1 GB boundary.\n"
>"\n"
>"Change this?\n"
>msgstr ""
>
>#: storage/src/include/custom_part_check_generated.ycp:569
>#, ycp-format
>msgid ""
>"Warning: With your current setup, your %1\n"
>"installation might not be directly bootable, because\n"
>"your files below \"/boot\" are on a software RAID device.\n"
>"The boot loader setup sometimes fails in this configuration.\n"
>"\n"
>"Change this?\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:587
>#, ycp-format
>msgid ""
>"Warning: With your current setup, your %1 installation\n"
>"will encounter problems when booting, because you have no \"boot\"\n"
>"partition and your \"root\" partition is an LVM logical volume.\n"
>"This does not work.\n"
>"\n"
>"\n"
>"If you do not know exactly what you are doing, use a normal\n"
>"partition for your files below /boot.\n"
>"\n"
>"Change this?\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:607
>#, ycp-format
>msgid ""
>"Warning: With your current setup, your %2 installation\n"
>"will encounter problems when booting, because you have no\n"
>"FAT partition mounted onto %1.\n"
>"\n"
>"This will give severe problems with the normal boot setup.\n"
>"\n"
>"If you do not know exactly what you are doing, use a normal\n"
>"FAT partition for your files below %1.\n"
>"\n"
>"Change this?\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:625
>#, ycp-format
>msgid ""
>"Warning: With your current setup, your installation will probably encounter problems \n"
>"when booting, because you have no separate %1\n"
>"partition on your RAID disk.\n"
>"\n"
>"This will give severe problems with the normal boot setup.\n"
>"\n"
>"If you do not know exactly what you are doing, use a normal\n"
>"FAT partition for your files below %1.\n"
>"\n"
>"Change this?\n"
>msgstr ""
>
>#: storage/src/include/custom_part_check_generated.ycp:645
>msgid "Change this?"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:652
>msgid ""
>"\n"
>"You have not assigned a swap partition. There is nothing wrong with that, but\n"
>"in most cases it is highly recommended to create and assign a swap partition.\n"
>"Swap partitions on your system are listed in the main window with the\n"
>"type \"Linux Swap\". An assigned swap partition has the mount point \"swap\".\n"
>"You can assign more than one swap partition, if desired.\n"
>"\n"
>"\n"
>"Do you want to change this?\n"
>msgstr ""
>
>#. popup message
>#: storage/src/include/custom_part_check_generated.ycp:669
>#, ycp-format
>msgid ""
>"\n"
>"Your swap partition is the first partition of %1.\n"
>"It is strongly recommended to change this, because\n"
>"the disk label will be deleted.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:680
>msgid ""
>"\n"
>"WARNING:\n"
>"\n"
>"You chose to install onto an existing partition that will not be\n"
>"formatted. YaST2 cannot guarantee your installation will succeed,\n"
>"particularly in any of the following cases:\n"
>msgstr ""
>
>#. continued popup text
>#: storage/src/include/custom_part_check_generated.ycp:688
>msgid ""
>"- if this is an existing ReiserFS partition\n"
>"- if this partition already contains a Linux distribution that will be\n"
>"overwritten\n"
>"- if this partition does not yet contain a file system\n"
>msgstr ""
>
>#. continued popup text
>#: storage/src/include/custom_part_check_generated.ycp:694
>msgid ""
>"If in doubt, you might want to go back and mark this partition for\n"
>"formatting, especially if it is assigned to one of the standard mount points\n"
>"like /, /boot, /usr, /opt, or /var.\n"
>msgstr ""
>
>#. continued popup text
>#: storage/src/include/custom_part_check_generated.ycp:699
>msgid ""
>"If you decide to format the partition, all data on it will be lost.\n"
>"\n"
>"Do you want to change your setup?\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:769
>#: storage/src/include/custom_part_check_generated.ycp:822
>msgid "Partition 3 \"Entire Disk\" is not changeable"
>msgstr ""
>
>#. popup text %1 is replaced by a raid name e.g. md0
>#: storage/src/include/custom_part_check_generated.ycp:778
>#, ycp-format
>msgid ""
>"The selected device belongs to the RAID (%1).\n"
>"Remove it from the RAID before editing it.\n"
>msgstr ""
>
>#. popup text %1 is replaced by a name e.g. system
>#: storage/src/include/custom_part_check_generated.ycp:786
>#, ycp-format
>msgid ""
>"The selected device belongs to a volume group (%1).\n"
>"Remove it from the volume group before editing it.\n"
>msgstr ""
>
>#. popup text %1 is replaced by a name e.g. system
>#: storage/src/include/custom_part_check_generated.ycp:793
>#, ycp-format
>msgid ""
>"The selected device is used by EVMS volume (%1).\n"
>"Remove the EVMS volume before editing it.\n"
>msgstr ""
>
>#. popup text %1 is replaced by a name e.g. system
>#: storage/src/include/custom_part_check_generated.ycp:800
>#, ycp-format
>msgid ""
>"The selected device is used by volume (%1).\n"
>"Remove the volume before editing it.\n"
>msgstr ""
>
>#. popup text %2 is a device name, %1 is the volume group name
>#: storage/src/include/custom_part_check_generated.ycp:834
>#, ycp-format
>msgid ""
>"The device (%2) belongs to a volume group (%1).\n"
>"Remove it from the volume group before deleting it.\n"
>msgstr ""
>
>#. popup text %2 is a device name, %1 is the raid name
>#: storage/src/include/custom_part_check_generated.ycp:842
>#, ycp-format
>msgid ""
>"The device (%2) belongs to the RAID (%1).\n"
>"Remove it from the RAID before deleting it.\n"
>msgstr ""
>
>#. popup text %2 is a device name, %1 is the EVMS name
>#: storage/src/include/custom_part_check_generated.ycp:850
>#, ycp-format
>msgid ""
>"The device (%2) is used by EVMS object (%1).\n"
>"Remove the EVMS object before deleting it.\n"
>msgstr ""
>
>#. popup text %2 is a device name, %1 is the EVMS name
>#: storage/src/include/custom_part_check_generated.ycp:857
>#, ycp-format
>msgid ""
>"The device (%2) is used by %1.\n"
>"Remove %1 before deleting it.\n"
>msgstr ""
>
>#. popup text %1 is directory name
>#: storage/src/include/custom_part_check_generated.ycp:870
>#, ycp-format
>msgid ""
>"The selected device is currently mounted on %1.\n"
>"It is *strongly* recommended to unmount it manually\n"
>"before deleting it.\n"
>"\n"
>"Click Cancel unless you know exactly what you are doing.\n"
>"\n"
>"If you proceed, YaST2 will try unmounting before deleting it.\n"
>msgstr ""
>
>#. popup text %1 is directory name
>#: storage/src/include/custom_part_check_generated.ycp:892
>#, ycp-format
>msgid ""
>"Unmount of %1 failed.\n"
>"Remove the device anyway?\n"
>msgstr ""
>
>#. button text
>#: storage/src/include/custom_part_check_generated.ycp:899
>msgid "&Retry umount"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_check_generated.ycp:957
>#, ycp-format
>msgid ""
>"The selected extended partition contains partitions which are currently mounted:\n"
>"%1\n"
>"It is *strongly* recommended to unmount these partitions before you delete the extended partition.\n"
>"Please choose Cancel unless you know exactly what you are doing.\n"
>msgstr ""
>
>#. popup text, Do not translate LVM.
>#: storage/src/include/custom_part_check_generated.ycp:975
>msgid ""
>"\n"
>"The selected extended partition contains at least one LVM partition\n"
>"assigned to a volume group. Remove all\n"
>"partitions from their respective volume groups\n"
>"before deleting the extended partition.\n"
>msgstr ""
>
>#. popup text, Do not translate RAID.
>#: storage/src/include/custom_part_check_generated.ycp:985
>msgid ""
>"\n"
>"The selected extended partition contains at least one partition\n"
>"that is part of a RAID system. Unassign the\n"
>"partitions from their respective RAID systems before\n"
>"deleting the extended partition.\n"
>msgstr ""
>
>#. popup text, Do not translate EVMS.
>#: storage/src/include/custom_part_check_generated.ycp:995
>msgid ""
>"\n"
>"The selected extended partition contains at least one partition\n"
>"that is used by an EVMS volume. Remove the EVMS volume\n"
>"before deleting the extended partition.\n"
>msgstr ""
>
>#. popup text, Do not translate RAID.
>#: storage/src/include/custom_part_check_generated.ycp:1004
>msgid ""
>"\n"
>"The selected extended partition contains at least one partition\n"
>"that is in use. Remove the used volume before\n"
>"deleting the extended partition.\n"
>msgstr ""
>
>#. heading text
>#: storage/src/include/custom_part_dialogs.ycp:48
>#: storage/src/include/custom_part_dialogs.ycp:198
>msgid "Enter your password for the encrypted file system"
>msgstr ""
>
>#. heading text, %1 is replaced by device name (e.g. /dev/hda1)
>#: storage/src/include/custom_part_dialogs.ycp:52
>#, ycp-format
>msgid "Password for Encrypted File System on %1"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:70
>msgid "Don't forget what you enter here!"
>msgstr ""
>
>#. Label: get password for user root
>#. Please use newline if label is longer than 40 characters
>#: storage/src/include/custom_part_dialogs.ycp:77
>#: storage/src/include/custom_part_dialogs.ycp:213
>msgid "&Enter a password for your file system:"
>msgstr ""
>
>#. Label: get same password again for verification
>#. Please use newline if label is longer than 40 characters
>#: storage/src/include/custom_part_dialogs.ycp:86
>#: storage/src/include/custom_part_dialogs.ycp:221
>msgid "Reenter the password for &verification:"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:127
>#: storage/src/include/custom_part_dialogs.ycp:262
>msgid ""
>"The first and the second version\n"
>"of the password do not match!\n"
>"Please try again."
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:132
>#: storage/src/include/custom_part_dialogs.ycp:267
>msgid ""
>"You did not enter a password.\n"
>"Try again.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:139
>#: storage/src/include/custom_part_dialogs.ycp:278
>#, ycp-format
>msgid ""
>"The password must have at least %1 characters.\n"
>"Try again.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:150
>msgid ""
>"The password may only contain the following characters:\n"
>" 0..9, a..z, A..Z, and any of \"@#* ,.;:._-+!$%&/|?{[()]}\".\n"
>"Try again."
>msgstr ""
>
>#. translator comment: %1 is the device name, %2 is a directory
>#. example: "...password for device /dev/hda6 mounted on /var"
>#: storage/src/include/custom_part_dialogs.ycp:185
>#, ycp-format
>msgid ""
>"Enter your crypt password for\n"
>"device %1 mounted on %2.\n"
>msgstr ""
>
>#. Cancel button
>#: storage/src/include/custom_part_dialogs.ycp:231
>msgid "&Skip"
>msgstr ""
>
>#. heading text
>#: storage/src/include/custom_part_dialogs.ycp:364
>msgid "File system options:"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:450
>msgid ""
>"The character '/' is no longer permitted in a volume label.\n"
>"Change your volume label so that it does not contain this character.\n"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/include/custom_part_dialogs.ycp:469
>msgid ""
>"Mount in /etc/fstab By:\n"
>"Normally, a file system to mount is identified in /etc/fstab\n"
>"by the device name. This identification can be changed so the file system to mount\n"
>"is found by searching for a UUID or a volume label. Not all file systems can be\n"
>"mounted by UUID or a volume label. If an option is disabled, it is not possible.\n"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/include/custom_part_dialogs.ycp:477
>msgid ""
>"Volume Label:\n"
>"The name entered in this field is used as the volume label. This normally only\n"
>"makes sense when you activate the option for mounting by volume label.\n"
>"A volume label cannot contain the / character or spaces.\n"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:489
>msgid "Mount in /etc/fstab by"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:494
>msgid "&Device name"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:497
>msgid "Volume &label"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:505
>msgid "Device &ID"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:508
>msgid "Device &Path"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:515
>msgid "Volume &Label"
>msgstr ""
>
>#. heading text
>#: storage/src/include/custom_part_dialogs.ycp:617
>msgid "Fstab options:"
>msgstr ""
>
>#. popup text %1 is a number
>#: storage/src/include/custom_part_dialogs.ycp:714
>#, ycp-format
>msgid ""
>"\n"
>"Maximum volume label length for the selected file system\n"
>"is %1. Your volume label was truncated to this size.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:734
>msgid "Provide a volume label to mount by label."
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:742
>msgid "This volume label is already in use. Select a different one."
>msgstr ""
>
>#. button text
>#: storage/src/include/custom_part_dialogs.ycp:881
>msgid "&Encrypt file system"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:888
>msgid "File &system"
>msgstr ""
>
>#. button text
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:891
>#: storage/src/include/raid_ui.ycp:632
>msgid "O&ptions"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:929
>msgid "File system &ID:"
>msgstr ""
>
>#. label text
>#. table column headings
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:953
>#: storage/src/include/lvm_ui_lib.ycp:241 storage/src/inst_evms.ycp:114
>msgid "Size"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:956
>msgid "Cylinder size: "
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:959
>msgid "S&tart cylinder:"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:962
>msgid "En&d: (9 or +9M or +3.2GB)"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:971
>msgid "Type of partition: "
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:973
>msgid ""
>"\n"
>"Start cylinder:"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:975
>msgid ""
>"\n"
>"End cylinder: "
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:1012
>msgid "2:Format"
>msgstr ""
>
>#: storage/src/include/custom_part_dialogs.ycp:1018
>msgid "Do &not format"
>msgstr ""
>
>#. button text
>#: storage/src/include/custom_part_dialogs.ycp:1022
>msgid "&Format"
>msgstr ""
>
>#. button text
>#: storage/src/include/custom_part_dialogs.ycp:1060
>msgid "RAID T&ype"
>msgstr ""
>
>#. Raid combobox description (don't translate to much ..)
>#: storage/src/include/custom_part_dialogs.ycp:1078
>msgid "Chunk s&ize in KB"
>msgstr ""
>
>#. Raid combobox description (don't translate to much ..)
>#: storage/src/include/custom_part_dialogs.ycp:1081
>msgid "Parity &algorithm (only for RAID 5)"
>msgstr ""
>
>#. button text
>#: storage/src/include/custom_part_dialogs.ycp:1161
>msgid "Fs&tab Options"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:1165
>msgid "&Mount Point"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:1177
>msgid ""
>"You have changed the parameters of a partition currently\n"
>"mounted. In some cases, this can damage your Linux installation.\n"
>"\n"
>"Proceed only if you know what you are doing. If you are unsure,\n"
>"press Cancel.\n"
>"\n"
>msgstr ""
>
>#. popup text %1 is a partition name, %2 a dirctory
>#: storage/src/include/custom_part_dialogs.ycp:1193
>#, ycp-format
>msgid ""
>"\n"
>"The selected partition (%1) is currently mounted on %2.\n"
>"If you change parameters (such as the mount point or the file system type),\n"
>"your Linux installation might be damaged.\n"
>"\n"
>"Unmount the partition if possible. If you are unsure,\n"
>"it is recommended to abort. Do not proceed unless you know\n"
>"exactly what you are doing.\n"
>"\n"
>"Continue?\n"
>msgstr ""
>
>#: storage/src/include/custom_part_dialogs.ycp:1215
>msgid "logical volume"
>msgstr ""
>
>#: storage/src/include/custom_part_dialogs.ycp:1215
>msgid "partition"
>msgstr ""
>
>#. Popup text
>#. %1 is either replaced by "logical volume" or by "partition"
>#: storage/src/include/custom_part_dialogs.ycp:1224
>#, ycp-format
>msgid ""
>"\n"
>"The file system on the %1 cannot be shrunk by YaST2.\n"
>"Only fat, ext2, ext3, and reiser allow shrinking of a file system."
>msgstr ""
>
>#. Popup text
>#. %1 is either replaced by "logical volume" or by "partition"
>#: storage/src/include/custom_part_dialogs.ycp:1233
>#, ycp-format
>msgid "You risk losing data if you shrink this %1."
>msgstr ""
>
>#: storage/src/include/custom_part_dialogs.ycp:1235
>msgid "Continue?"
>msgstr ""
>
>#. Popup text
>#. %1 is either replaced by "logical volume" or by "partition"
>#: storage/src/include/custom_part_dialogs.ycp:1254
>#, ycp-format
>msgid ""
>"\n"
>"The file system on the selected %1 cannot be extended by YaST2.\n"
>"Only fat, ext2, ext3, xfs, and reiser allow extending a file system."
>msgstr ""
>
>#. Popup text
>#. %1 is either replaced by "logical volume" or by "partition"
>#: storage/src/include/custom_part_dialogs.ycp:1262
>#, ycp-format
>msgid "Continue resizing the %1?"
>msgstr ""
>
>#. %1 is either replaced by "logical volume" or by "partition"
>#: storage/src/include/custom_part_dialogs.ycp:1279
>#, ycp-format
>msgid ""
>"\n"
>"The %1 is currently mounted on %2.\n"
>"It is not possible to resize the file system while it is mounted.\n"
>"\n"
>"Unmount the file system and retry resizing.\n"
>msgstr ""
>
>#. Popup text
>#. %1 is either replaced by "logical volume" or by "partition"
>#: storage/src/include/custom_part_dialogs.ycp:1294
>#, ycp-format
>msgid ""
>"\n"
>"You decreased a %1 with a reiser file system on it.\n"
>"It is possible to shrink a reiser file system, but this feature is not\n"
>"very thoroughly tested. A backup of your data is recommended.\n"
>"\n"
>"Shrink the file system now?"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:1322
>msgid "No previous system with mount points was detected."
>msgstr ""
>
>#. heading text
>#: storage/src/include/custom_part_dialogs.ycp:1327
>msgid "Device "
>msgstr ""
>
>#: storage/src/include/custom_part_dialogs.ycp:1327
>msgid "Mount "
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/include/custom_part_dialogs.ycp:1330
>msgid ""
>"<BIG>Attention:</BIG> YaST2 has scanned your hard disks and found an old Linux system\n"
>"with mount points. On the right, see a list with the mount points found. \n"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/include/custom_part_dialogs.ycp:1334
>msgid "To use these mount points, press Yes."
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/include/custom_part_dialogs.ycp:1336
>msgid "To ignore these mount points, press No."
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:1355
>msgid ""
>"Would you like to use these mount points\n"
>"for your new installation?"
>msgstr ""
>
>#: storage/src/include/custom_part_dialogs.ycp:1368
>#, ycp-format
>msgid ""
>"A previous system with the following mount points was detected:\n"
>"/etc/fstab found on %1"
>msgstr ""
>
>#: storage/src/include/custom_part_dialogs.ycp:1384
>msgid "Show &Previous"
>msgstr ""
>
>#: storage/src/include/custom_part_dialogs.ycp:1389
>msgid "Show &Next"
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:1465
>msgid "free"
>msgstr ""
>
>#. %1 is a disk device, example: You have selected the disk /dev/hda, but can only edit a partition like /dev/hda11, /dev/hda2,
>#: storage/src/include/custom_part_dialogs.ycp:1484
>#, ycp-format
>msgid ""
>"\n"
>" You have selected the disk %1, but you can \n"
>" only edit a partition like %11, %12, ... \n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:1516
>#, ycp-format
>msgid ""
>"CAUTION\n"
>"If you delete the partition table and disk label of\n"
>"device %1, data on this device will be lost.\n"
>"\n"
>"Really do this?\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:1541
>msgid "No changes made so far could be performed."
>msgstr ""
>
>#. label text
>#: storage/src/include/custom_part_dialogs.ycp:1549
>msgid "Changes:"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:1559
>msgid " Do you really want to execute these changes?"
>msgstr ""
>
>#. button text
>#: storage/src/include/custom_part_dialogs.ycp:1568
>#: storage/src/inst_custom_part.ycp:2622
>msgid "&Apply"
>msgstr ""
>
>#. popup text, %1 is replaced by device name
>#: storage/src/include/custom_part_dialogs.ycp:1623
>#, ycp-format
>msgid ""
>"The selected device contains partitions that are currently mounted:\n"
>"%1\n"
>"It is *strongly* recommended to unmount these partitions before deleting the partition table.\n"
>"Choose Cancel unless you know exactly what you are doing.\n"
>msgstr ""
>
>#. popup text, Do not translate LVM.
>#: storage/src/include/custom_part_dialogs.ycp:1647
>msgid ""
>"\n"
>"The selected device contains at least one LVM partition\n"
>"assigned to a volume group. Remove all\n"
>"partitions from their respective volume groups\n"
>"before deleting the device.\n"
>msgstr ""
>
>#. popup text, Do not translate RAID.
>#: storage/src/include/custom_part_dialogs.ycp:1657
>msgid ""
>"\n"
>"The selected device contains at least one partition\n"
>"that is part of a RAID system. Unassign the\n"
>"partitions from their respective RAID systems before\n"
>"before deleting the device.\n"
>msgstr ""
>
>#. popup text, Do not translate EVMS.
>#: storage/src/include/custom_part_dialogs.ycp:1667
>msgid ""
>"\n"
>"The selected device contains at least one partition\n"
>"that is used by an EVMS device. Delete the EVMS device\n"
>"before deleting the device.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_dialogs.ycp:1676
>msgid ""
>"\n"
>"The selected device contains at least one partition\n"
>"that is used by another volume. Delete the volume using it\n"
>"before deleting the device.\n"
>msgstr ""
>
>#. help text for cryptofs
>#: storage/src/include/custom_part_helptexts.ycp:38
>msgid ""
>"\n"
>"Create an encrypted file system.\n"
>"\n"
>msgstr ""
>
>#. help text for cryptofs
>#: storage/src/include/custom_part_helptexts.ycp:46
>msgid ""
>"\n"
>"Access an encrypted file system.\n"
>"\n"
>msgstr ""
>
>#. help text for cryptofs
>#: storage/src/include/custom_part_helptexts.ycp:53
>msgid ""
>"\n"
>"Keep in mind that this file system is only protected when it is not\n"
>"mounted. Once it is mounted, it is as secure as every other\n"
>"Linux file system.\n"
>"\n"
>msgstr ""
>
>#. help text, continued
>#: storage/src/include/custom_part_helptexts.ycp:63
>msgid ""
>"\n"
>"If you forget your password, you will lose access to the data on your file system.\n"
>"Choose your password carefully. A combination of letters and numbers\n"
>"is recommended. To ensure the password was entered correctly,\n"
>"enter it twice.\n"
>"\n"
>msgstr ""
>
>#. help text, continued
>#: storage/src/include/custom_part_helptexts.ycp:72
>#, ycp-format
>msgid ""
>"\n"
>"You must distinguish between uppercase and lowercase. A password should have at\n"
>"least %1 characters and, as a rule, not contain any special characters\n"
>"(e.g., letters with accents or umlauts).\n"
>"\n"
>msgstr ""
>
>#. help text, continued
>#: storage/src/include/custom_part_helptexts.ycp:80
>msgid ""
>"\n"
>"Possible characters are\n"
>"<tt>#*,.;:._-+!</tt><tt>$%&/|?{[()]}</tt>, blanks, uppercase and lowercase\n"
>"letters (<tt>A-Za-Z</tt>), and digits <tt>0</tt> to <tt>9</tt>.\n"
>"\n"
>msgstr ""
>
>#. help text, continued
>#: storage/src/include/custom_part_helptexts.ycp:89
>msgid ""
>"\n"
>"Do not forget this password!\n"
>""
>msgstr ""
>
>#. help text for cryptofs
>#: storage/src/include/custom_part_helptexts.ycp:100
>msgid ""
>"\n"
>"You will need to enter your crypt fs password.\n"
>""
>msgstr ""
>
>#. help text, continued
>#: storage/src/include/custom_part_helptexts.ycp:105
>msgid ""
>"\n"
>"If the encrypted file system does not contain any system file and therefore is\n"
>"not needed for the update, you may select Skip. In this case, the\n"
>"file system is not accessed during update.\n"
>"\n"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/include/custom_part_helptexts.ycp:124
>msgid ""
>"On already-existing partitions, you can change\n"
>"everything except the start and size of the partition."
>msgstr ""
>
>#. helptext for popup create partition line 1 of 6
>#: storage/src/include/custom_part_helptexts.ycp:130
>msgid "First, choose the type of the partition and whether this partition should be formatted."
>msgstr ""
>
>#. helptext for popup create partition line 2 of 6
>#: storage/src/include/custom_part_helptexts.ycp:132
>msgid "Then, enter the mount point ( /, /boot, /usr, /var, etc.)"
>msgstr ""
>
>#. helptext line 3 of 3
>#: storage/src/include/custom_part_helptexts.ycp:138
>msgid "To change the start or end cylinder, delete this partition then create a new one with the new parameters. All data on this partition will be lost."
>msgstr ""
>
>#. helptext for popup create partition line 3 of 6
>#: storage/src/include/custom_part_helptexts.ycp:143
>msgid "Now, enter the location of the new partition on your hard disk. "
>msgstr ""
>
>#. helptext for popup create partition line 4 of 6
>#: storage/src/include/custom_part_helptexts.ycp:145
>msgid "Please enter the starting cylinder number of the partition. "
>msgstr ""
>
>#. helptext for popup create partition line 5 of 6
>#: storage/src/include/custom_part_helptexts.ycp:147
>msgid "After that, either specify an ending cylinder number or an offset from the first cylinder (e.g., +66)."
>msgstr ""
>
>#. helptext for popup create partition line 6 of 6
>#: storage/src/include/custom_part_helptexts.ycp:149
>msgid "It is also possible to specify the size of the partition directly (e.g., +100M or +20000K))"
>msgstr ""
>
>#. helptext for popup create extended partition line
>#: storage/src/include/custom_part_helptexts.ycp:159
>msgid ""
>"Enter the starting cylinder number of the partition.\n"
>"After that, either specify an ending cylinder number or an offset from the first cylinder (e.g., +66).\n"
>"It is also possible to specify the size of the partition directly (e.g., +2G, +100M, or +20000K)\n"
>msgstr ""
>
>#. helptext expert partitioning. 1
>#: storage/src/include/custom_part_helptexts.ycp:172
>msgid " Partition your hard disks... "
>msgstr ""
>
>#. helptext expert partitioning. 2
>#: storage/src/include/custom_part_helptexts.ycp:175
>msgid ""
>"\n"
>"This is intended for experts.\n"
>"If you are not familiar with the concepts of hard disk partitions\n"
>"and how to use them, you might want to go back and select automatic\n"
>"partitioning.\n"
>""
>msgstr ""
>
>#. helptext expert partitioning. 3
>#: storage/src/include/custom_part_helptexts.ycp:184
>msgid ""
>"\n"
>"Please note that nothing will be written to your hard disk\n"
>"until you confirm the entire installation in the last installation dialog.\n"
>"Until that point, you can safely abort the installation.\n"
>""
>msgstr ""
>
>#. helptext expert partitioning. 3
>#: storage/src/include/custom_part_helptexts.ycp:193
>msgid ""
>"\n"
>"Nothing will be written to your hard disk\n"
>"until you confirm all your changes with the \"Apply\" button.\n"
>"Until that point, you can safely abort.\n"
>"\n"
>msgstr ""
>
>#. helptext expert partitioning
>#: storage/src/include/custom_part_helptexts.ycp:202
>msgid ""
>"\n"
>"For LVM setup, using a non-LVM root device and a non-LVM swap\n"
>"device is recommended. Other than the root and swap devices, you should have partitions\n"
>"managed by LVM.\n"
>msgstr ""
>
>#. helptext expert partitioning. 4
>#: storage/src/include/custom_part_helptexts.ycp:209
>msgid ""
>"\n"
>"The table to the right shows the current partitions on all your hard disks.\n"
>"\n"
>msgstr ""
>
>#. helptext expert partitioning. 5
>#: storage/src/include/custom_part_helptexts.ycp:215
>msgid "Hard disks are designated like this "
>msgstr ""
>
>#. help text
>#: storage/src/include/custom_part_helptexts.ycp:217
>msgid ""
>"<tt>/dev/hda </tt>1st EIDE disk\n"
>"<tt>/dev/hdb </tt>2nd EIDE disk\n"
>"<tt>/dev/hdc </tt>3rd EIDE disk"
>msgstr ""
>
>#. help text
>#. helptext expert partitioning. 6
>#: storage/src/include/custom_part_helptexts.ycp:221
>#: storage/src/include/custom_part_helptexts.ycp:229
>msgid "etc."
>msgstr ""
>
>#. help text
>#: storage/src/include/custom_part_helptexts.ycp:223
>msgid "- or - "
>msgstr ""
>
>#. help text
>#: storage/src/include/custom_part_helptexts.ycp:225
>msgid ""
>"<tt>/dev/sda </tt>1st SCSI disk\n"
>"<tt>/dev/sdb </tt>2nd SCSI disk\n"
>"<tt>/dev/sdc </tt>3rd SCSI disk"
>msgstr ""
>
>#. help text
>#: storage/src/include/custom_part_helptexts.ycp:231
>msgid ""
>"\n"
>"This notation always refers to the entire disk.\n"
>""
>msgstr ""
>
>#. helptext expert partitioning. 7
>#: storage/src/include/custom_part_helptexts.ycp:235
>msgid ""
>"\n"
>"Partitions are designated like this:\n"
>""
>msgstr ""
>
>#. helptext expert partitioning. 8
>#: storage/src/include/custom_part_helptexts.ycp:239
>msgid "<tt>/dev/hda1 </tt>1st primary partition on the 1st EIDE disk."
>msgstr ""
>
>#. helptext expert partitioning
>#: storage/src/include/custom_part_helptexts.ycp:241
>msgid "<tt>/dev/hda2 </tt>2nd primary partition on the 1st EIDE disk."
>msgstr ""
>
>#. helptext expert partitioning
>#: storage/src/include/custom_part_helptexts.ycp:244
>msgid ""
>"<tt>/dev/hda5 </tt>1st logical partition within the extended partition on\n"
>"the first EIDE disk. Note: this is always #5, even if there are less than four\n"
>"primary partitions."
>msgstr ""
>
>#. helptext expert partitioning. 9
>#: storage/src/include/custom_part_helptexts.ycp:248
>msgid "<tt>/dev/hda6 </tt>2nd logical partition"
>msgstr ""
>
>#. helptext expert partitioning
>#: storage/src/include/custom_part_helptexts.ycp:251
>msgid "<tt>/dev/sda1</tt>, etc., for SCSI."
>msgstr ""
>
>#. helptext expert partitioning. 10
>#: storage/src/include/custom_part_helptexts.ycp:253
>msgid ""
>"\n"
>"On the i386 platform (i.e., normal PCs), there cannot be more than four\n"
>"primary partitions on any hard disk, because the respective table in the\n"
>"master boot record cannot contain more than four entries.\n"
>"\n"
>msgstr ""
>
>#. helptext expert partitioning. 11
>#: storage/src/include/custom_part_helptexts.ycp:260
>msgid ""
>"\n"
>"Older PCs may have a BIOS limitation that restricts bootable\n"
>"partitions to cylinders below 1024.\n"
>"\n"
>msgstr ""
>
>#. helptext expert partitioning. 12
>#: storage/src/include/custom_part_helptexts.ycp:266
>msgid ""
>"\n"
>"If you have an older PC and want to boot from a partition, make sure it ends below this\n"
>"1024 cylinder boundary. Create a separate partition and mount it as\n"
>"/boot, if necessary. A partition consisting of one single cylinder\n"
>"(at least 12 MB) is usually sufficient for that.\n"
>"\n"
>msgstr ""
>
>#. helptext expert partitioning. 13
>#: storage/src/include/custom_part_helptexts.ycp:274
>msgid ""
>"\n"
>"One of the four primary partitions may be an extended partition.\n"
>"This extended partition can contain one or more logical partitions.\n"
>""
>msgstr ""
>
>#. helptext expert partitioning. 14
>#: storage/src/include/custom_part_helptexts.ycp:279
>msgid ""
>"\n"
>"The extended partition itself cannot hold any data.\n"
>"To use its space, create logical partitions.\n"
>"These logical partitions may contain any kind of Linux partition (Linux\n"
>"file systems or Linux swap partition) or partitions for other\n"
>"operating systems.\n"
>"\n"
>msgstr ""
>
>#. helptext expert partitioning. 15
>#: storage/src/include/custom_part_helptexts.ycp:288
>msgid ""
>"\n"
>"In connection with advanced boot managers such as LILO, you can even\n"
>"boot your computer from a logical partition.\n"
>""
>msgstr ""
>
>#. helptext expert partitioning. 16
>#: storage/src/include/custom_part_helptexts.ycp:293
>msgid ""
>"\n"
>"The extended partition will overlap with the logical\n"
>"partitions: for an extended partition from cylinder 200 to 500, logical\n"
>"partitions could range from, for example, 200 to 250, 251 to 400, and 401 to 500.\n"
>"\n"
>msgstr ""
>
>#. helptext expert partitioning. 17
>#: storage/src/include/custom_part_helptexts.ycp:300
>msgid ""
>"\n"
>"An asterisk (*) after the mount point indicates a file system that is\n"
>"currently not mounted (for example, because it has the <tt>noauto</tt> option set in <tt>/etc/fstab</tt>).\n"
>"\n"
>msgstr ""
>
>#. helptext expert partitioning. 18
>#: storage/src/include/custom_part_helptexts.ycp:306
>msgid ""
>"\n"
>"The column labeled F contains flags. <tt>C</tt> means the partition is encrypted. \n"
>"<tt>F</tt> means the partition is selected to be formatted.\n"
>"\n"
>msgstr ""
>
>#. helptext expert partitioning. 19
>#: storage/src/include/custom_part_helptexts.ycp:312
>msgid ""
>"\n"
>"Used By tells if a device is used by LVM, RAID or EVMS. If you do not use such\n"
>"things, it is perfectly normal for this column to be empty.\n"
>"\n"
>msgstr ""
>
>#. helptext expert partitioning. 20
>#: storage/src/include/custom_part_helptexts.ycp:318
>msgid ""
>"\n"
>"Mount By indicates how the file system is mounted: (K) by Kernel Name,\n"
>"(L) by Label, (U) by UUID, (I) by Device ID, and (P) by Device Path.\n"
>"\n"
>msgstr ""
>
>#. helptext S390 expert partitioning 1
>#: storage/src/include/custom_part_helptexts.ycp:334
>msgid ""
>"\n"
>"For a root file system on SCSI disks, add a /boot\n"
>"partition on DASD to use for IPL.\n"
>msgstr ""
>
>#. helptext S390 expert partitioning 2
>#: storage/src/include/custom_part_helptexts.ycp:340
>msgid ""
>"\n"
>"The table to the right shows the current partitions on all your hard disks.\n"
>"Nothing will be written to your hard disk\n"
>"until you confirm the entire installation in the last installation dialog.\n"
>"Until that point, you can safely abort the installation."
>msgstr ""
>
>#. helptext S390 expert partitioning 3
>#: storage/src/include/custom_part_helptexts.ycp:347
>msgid ""
>"\n"
>"Hard disks are designated like this: \n"
>"<tt>/dev/dasda </tt>First DASD disk\n"
>"<tt>/dev/dasdb </tt>Second DASD disk\n"
>"<tt>/dev/dasdc </tt>Third DASD disk\n"
>"- or - \n"
>"<tt>/dev/sda </tt>First SCSI disk\n"
>"<tt>/dev/sdb </tt>Second SCSI disk\n"
>"<tt>/dev/sdc </tt>Third SCSI disk"
>msgstr ""
>
>#. helptext S390 expert partitioning 4
>#: storage/src/include/custom_part_helptexts.ycp:358
>msgid ""
>"\n"
>"This notation always refers to the entire disk."
>msgstr ""
>
>#. helptext S390 expert partitioning 5
>#: storage/src/include/custom_part_helptexts.ycp:362
>msgid ""
>"\n"
>"If a DASD disk is selected for low level formatting\n"
>"with the dasdfmt command, an <tt>X</tt> appears\n"
>"in the third column of the line corresponding to the\n"
>"disk.\n"
>msgstr ""
>
>#. helptext S390 expert partitioning 6
>#: storage/src/include/custom_part_helptexts.ycp:370
>msgid ""
>"\n"
>"Partitions are designated like this:\n"
>"\n"
>"<tt>/dev/dasda1 </tt>First partition on the first DASD disk.\n"
>"<tt>/dev/dasda2 </tt>Second partition on the first DASD disk.\n"
>"<tt>/dev/dasda3 </tt>Third partition on the first DASD disk.\n"
>"<tt>/dev/sda1</tt>, etc., for SCSI."
>msgstr ""
>
>#: storage/src/include/custom_part_helptexts.ycp:383
>msgid ""
>"Warning: With your current setup, your installation\n"
>"will encounter problems when booting, because the disk you \n"
>"have your /boot partition on does not contain a GPT disk label.\n"
>"\n"
>"It will probably not be possible to boot such a setup.\n"
>"\n"
>"If you need to use this disk for installation, you should destroy \n"
>"the disk label in the expert partitioner."
>msgstr ""
>
>#. error popup text
>#: storage/src/include/custom_part_lib.ycp:145
>#, ycp-format
>msgid "You cannot use the mount point \"%1\" for LVM.\n"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/custom_part_lib.ycp:170
>#, ycp-format
>msgid "You cannot use the mount point %1 for RAID."
>msgstr ""
>
>#: storage/src/include/custom_part_lib.ycp:191
>msgid ""
>"You have selected not to mount automatically at start-up a file system\n"
>"that may contain files that the system needs to work properly.\n"
>"\n"
>"This might lead to trouble.\n"
>"\n"
>"Really do this?\n"
>msgstr ""
>
>#: storage/src/include/custom_part_lib.ycp:216
>msgid ""
>"You have assigned an encrypted file system to a partition\n"
>"with one of the following mount points: \"/\", \"/usr\", \"/boot\",\n"
>"\"swap\". This is not possible. Change the mount point or use a\n"
>"nonloopbacked file system.\n"
>msgstr ""
>
>#: storage/src/include/custom_part_lib.ycp:258
>msgid ""
>"You have set the option to be mountable by users for a file system\n"
>"that may contain files that need to be executable.\n"
>"\n"
>"This usually causes problems.\n"
>"\n"
>"Really do this?\n"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/custom_part_lib.ycp:308
>msgid "This mount point is already in use. Select a different one."
>msgstr ""
>
>#. error popup text
>#: storage/src/include/custom_part_lib.ycp:317
>msgid ""
>"FAT filesystem used for system mount point (/, /usr, /opt, /var, /home).\n"
>"This is not possible."
>msgstr ""
>
>#. error popup text
>#: storage/src/include/custom_part_lib.ycp:324
>msgid "Invalid character in mount point. Dont use \"`'!\"%#\" in a mount point."
>msgstr ""
>
>#. error popup text
>#: storage/src/include/custom_part_lib.ycp:332
>msgid ""
>"You cannot use any of the following mount points:\n"
>"/proc, /dev, /lib, /bin, /etc, /sbin, /mnt, /var/adm/mnt, /lost+found\n"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/custom_part_lib.ycp:340
>msgid "Your mount point must start with a \"/\" "
>msgstr ""
>
>#. error popup text
>#: storage/src/include/custom_part_lib.ycp:346
>msgid ""
>"\n"
>"WARNING:\n"
>"\n"
>"You chose a swap partition but did not direct YaST2 to format it.\n"
>"This swap partition will probably not be usable.\n"
>"\n"
>"Change the setup?\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/custom_part_lib.ycp:379
>msgid ""
>"Your partition is too small to use ReiserFS.\n"
>"ReiserFS is a journaling file system that requires\n"
>"at least 30 MB space for the journal alone.\n"
>"Use ReiserFS on larger partitions.\n"
>msgstr ""
>
>#: storage/src/include/custom_part_lib.ycp:388
>msgid ""
>"Your partition is too small to use JFS.\n"
>"JFS is a journaling file system that requires\n"
>"at least 16 MB space for the journal alone.\n"
>"Use JFS on larger partitions.\n"
>msgstr ""
>
>#. warning message, %1 is replaced by fs name (e.g. Ext3)
>#. %2 is prelaced by a size (e.g. 10 MB)
>#: storage/src/include/custom_part_lib.ycp:399
>#, ycp-format
>msgid ""
>"Your partition is too small to use %1.\n"
>"The minimum size for this file system is %2.\n"
>msgstr ""
>
>#: storage/src/include/custom_part_lib.ycp:502
>msgid "Detecting encryption type..."
>msgstr ""
>
>#. warning message, %1 is replaced by fs name (e.g. Ext3)
>#: storage/src/include/custom_part_lib.ycp:549
>#, ycp-format
>msgid ""
>"\n"
>"WARNING:\n"
>"\n"
>"This file system is not supported in %1;.\n"
>"It is completely untested and might not be well-integrated \n"
>"in the system. Do not file bugs against the file system \n"
>"itself if it does not work properly or at all.\n"
>"\n"
>"Undo the change of file system?\n"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/custom_part_lib.ycp:974
>#, ycp-format
>msgid ""
>"The size entered is invalid.\n"
>"Enter a size from 1M to %1. For example, 40M or 1G."
>msgstr ""
>
>#. error popup text
>#: storage/src/include/custom_part_lib.ycp:979
>msgid ""
>"The size entered is invalid.\n"
>"Enter a valid size, such as 500k, 40M, or 1G.\n"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/custom_part_lib.ycp:988
>#, ycp-format
>msgid ""
>"The size entered is too large.\n"
>"Enter a size from 1M to %1."
>msgstr ""
>
>#: storage/src/include/do_proposal_flexible.ycp:2655
>#: storage/src/include/do_proposal_flexible.ycp:3441
>msgid "Resize impossible due to inconsistent fs. Try checking fs under Windows."
>msgstr ""
>
>#. helptext EVMS partitioning. 
>#: storage/src/include/evms_lib.ycp:38
>msgid "The upper part of this dialog contains the container-related functionality. Here, create, edit, and modify EVMS containers. "
>msgstr ""
>
>#. helptext EVMS partitioning. 
>#: storage/src/include/evms_lib.ycp:41
>msgid ""
>"\n"
>"The lower part with the list contains all available EVMS devices.\n"
>"If at least one EVMS container is available, you can create new \n"
>"devices that use the available space of the current container.\n"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/evms_lib.ycp:89
>msgid ""
>"The data entered is invalid.\n"
>"Insert a physical extent size from\n"
>"8KB to 512GB in powers of 2, for example, 4M or 512K.\n"
>msgstr ""
>
>#. popup header
>#: storage/src/include/evms_lib.ycp:308
>msgid "Modify Existing EVMS Container"
>msgstr ""
>
>#. popup header
>#: storage/src/include/evms_lib.ycp:314
>msgid "Create EVMS Container"
>msgstr ""
>
>#. popup header
>#: storage/src/include/evms_lib.ycp:319
>msgid "Modify EVMS Container"
>msgstr ""
>
>#. popup description
>#: storage/src/include/evms_lib.ycp:324
>msgid ""
>"Change the settings for an EVMS container.\n"
>"Container type, PE size, and container name can only be set when creating\n"
>"the container.\n"
>msgstr ""
>
>#: storage/src/include/evms_lib.ycp:338
>msgid "Container Type"
>msgstr ""
>
>#. label text
>#: storage/src/include/evms_lib.ycp:340
>msgid "Linux LVM"
>msgstr ""
>
>#. label text
>#: storage/src/include/evms_lib.ycp:342
>msgid "Linux LVM2"
>msgstr ""
>
>#: storage/src/include/evms_lib.ycp:347
>msgid "Container &Name"
>msgstr ""
>
>#. label text
>#: storage/src/include/evms_lib.ycp:350
>#: storage/src/include/lvm_ui_dialogs.ycp:507
>msgid "&Physical Extent Size"
>msgstr ""
>
>#: storage/src/include/evms_lib.ycp:355
>msgid "Container Size:"
>msgstr ""
>
>#. header text
>#. Column header
>#. table header text
>#: storage/src/include/evms_lib.ycp:366 storage/src/inst_custom_part.ycp:2378
>#: storage/src/inst_evms.ycp:151
>msgid "Device"
>msgstr ""
>
>#: storage/src/include/evms_lib.ycp:366 storage/src/inst_evms.ycp:151
>msgid " Size"
>msgstr ""
>
>#. header text
>#: storage/src/include/evms_lib.ycp:368
>msgid " Container"
>msgstr ""
>
>#. button text
>#: storage/src/include/evms_lib.ycp:375 storage/src/include/lvm_ui_lib.ycp:219
>msgid "&Add Volume"
>msgstr ""
>
>#. button text
>#: storage/src/include/evms_lib.ycp:377 storage/src/include/lvm_ui_lib.ycp:221
>msgid "&Remove Volume"
>msgstr ""
>
>#: storage/src/include/evms_lib.ycp:487
>msgid ""
>"If you remove the selected partition from the container,\n"
>"there will not be enough space for all volumes in this container.\n"
>"To delete the container completely, remove its volumes first."
>msgstr ""
>
>#. error popup text
>#: storage/src/include/evms_lib.ycp:521
>msgid ""
>"The data entered is invalid.\n"
>"Insert a container names like \"system\" or \"test\".\n"
>"Do not use ;/`, in this name.\n"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/evms_lib.ycp:533
>#, ycp-format
>msgid ""
>"The container named \"%1\" already exists.\n"
>"Choose a different name\n"
>"or cancel this dialog.\n"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/evms_lib.ycp:543
>msgid ""
>"The container contains no physical volume.\n"
>"Every container must consist of at least one physical volume."
>msgstr ""
>
>#: storage/src/include/evms_lib.ycp:645
>#, ycp-format
>msgid ""
>"The container \"%1\" contains at least one volume.\n"
>"It cannot be removed. Remove all volumes of this container\n"
>"before removing the container"
>msgstr ""
>
>#. popup text
>#: storage/src/include/evms_lib.ycp:652
>#, ycp-format
>msgid "Really remove container \"%1\"?"
>msgstr ""
>
>#. button text
>#: storage/src/include/evms_lib.ycp:671 storage/src/inst_evms.ycp:110
>msgid "EVMS &Container"
>msgstr ""
>
>#. e.g. %1 is replaced with a size e.g.. "used 5 GB"
>#: storage/src/include/evms_lib.ycp:693
>#, ycp-format
>msgid ""
>"used\n"
>"%1"
>msgstr ""
>
>#. e.g. %1 is replaced with a size e.g.. "free 1 GB"
>#: storage/src/include/evms_lib.ycp:696
>#, ycp-format
>msgid ""
>"free\n"
>"%1"
>msgstr ""
>
>#. header for input field size of volume 
>#. header for input field size of Logical volume 
>#: storage/src/include/evms_lib.ycp:873
>#: storage/src/include/lvm_ui_dialogs.ycp:93
>#, ycp-format
>msgid "&Size: (e.g., %1 %2)"
>msgstr ""
>
>#. header for input field maximum allowd size
>#: storage/src/include/evms_lib.ycp:877
>#: storage/src/include/lvm_ui_dialogs.ycp:103
>#, ycp-format
>msgid "max = %1 "
>msgstr ""
>
>#. popup heading 
>#: storage/src/include/evms_lib.ycp:884
>#: storage/src/include/lvm_ui_dialogs.ycp:110
>msgid "Create Logical Volume"
>msgstr ""
>
>#. popup heading 
>#: storage/src/include/evms_lib.ycp:890 storage/src/include/evms_lib.ycp:902
>#: storage/src/include/lvm_ui_dialogs.ycp:123
>#: storage/src/include/lvm_ui_dialogs.ycp:137
>msgid "Edit Logical Volume"
>msgstr ""
>
>#: storage/src/include/evms_lib.ycp:898
>msgid "Resize Logical Volume"
>msgstr ""
>
>#. label text
>#: storage/src/include/evms_lib.ycp:915
>msgid "Volume &Name "
>msgstr ""
>
>#. label text
>#: storage/src/include/evms_lib.ycp:917
>#: storage/src/include/lvm_ui_dialogs.ycp:117
>msgid "(e.g. var, opt)"
>msgstr ""
>
>#. label text
>#: storage/src/include/evms_lib.ycp:925
>msgid "Volume Name: "
>msgstr ""
>
>#. button text
>#: storage/src/include/evms_lib.ycp:943
>#: storage/src/include/lvm_ui_dialogs.ycp:179
>msgid "ma&x"
>msgstr ""
>
>#. button text
>#: storage/src/include/evms_lib.ycp:948
>#: storage/src/include/lvm_ui_dialogs.ycp:185
>msgid "Stri&pes"
>msgstr ""
>
>#. button text
>#: storage/src/include/evms_lib.ycp:952
>#: storage/src/include/lvm_ui_dialogs.ycp:189
>msgid "Stripe &Size"
>msgstr ""
>
>#. label text %1 is prelaced by e.g. 4 GB
>#: storage/src/include/evms_lib.ycp:958
>#, ycp-format
>msgid "Size %1"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/evms_lib.ycp:1111
>#: storage/src/include/lvm_ui_dialogs.ycp:315
>#, no-c-format
>msgid ""
>"Check your volume name. \n"
>"Use names like \"opt\" or \"var\" ...\n"
>"Do not use ;/`',!\"%#"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/evms_lib.ycp:1125
>#, ycp-format
>msgid ""
>"A volume named \"%1\" already exists\n"
>"in container \"%2\". Choose another name\n"
>"or cancel this dialog.\n"
>msgstr ""
>
>#. popup text %1 is replaced by a container name
>#: storage/src/include/evms_lib.ycp:1220
>#, ycp-format
>msgid "There is no available space in the current container %1."
>msgstr ""
>
>#: storage/src/include/evms_lib.ycp:1234
>msgid ""
>"A volume with the requested size \n"
>"could not be created. \n"
>msgstr ""
>
>#: storage/src/include/evms_lib.ycp:1238 storage/src/include/lvm_lv_lib.ycp:62
>msgid "Try reducing the stripe count of the volume."
>msgstr ""
>
>#. popup text %1 is replaced by a container name
>#: storage/src/include/evms_lib.ycp:1306
>#, ycp-format
>msgid ""
>"You can only delete logical volumes in a container.\n"
>"%1 is not a logical volume produced by a container.\n"
>msgstr ""
>
>#. ///////////////////////////////////////////////////
>#. now delete partition!!
>#. YesNo popup text, %1 is replaced by a device name e.g. /dev/hda1
>#: storage/src/include/evms_lib.ycp:1312 storage/src/inst_custom_part.ycp:3162
>#, ycp-format
>msgid "Really delete %1?"
>msgstr ""
>
>#. help text richtext format
>#. %1 is replaced by description text for file pathname
>#: storage/src/include/loop.ycp:40
>#, ycp-format
>msgid ""
>"\n"
>"%1: This must be an absolute path to the file\n"
>"containing the data for the encrypted loop device to set up.\n"
>msgstr ""
>
>#. help text richtext format, continued
>#. %1 is replaced by description text for create button
>#: storage/src/include/loop.ycp:47
>#, ycp-format
>msgid ""
>"\n"
>"%1: If this is checked, the file will be \n"
>"created with the size given in the next field. NOTE: If the \n"
>"file already exists, all data in it is lost.\n"
>msgstr ""
>
>#. help text richtext format, continued
>#. %1 is replaced by description text for file size
>#: storage/src/include/loop.ycp:55
>#, ycp-format
>msgid ""
>"\n"
>"%1: This is the size of the loop file.\n"
>"The file system to create in the encrypted loop device will have \n"
>"this size.\n"
>msgstr ""
>
>#. help text richtext format, continued
>#: storage/src/include/loop.ycp:62
>msgid ""
>"\n"
>"NOTE:During installation, there cannot be any consistency\n"
>"checks about file size and path names because the file system is not \n"
>"accessible. It will be created at the end of installation. Be \n"
>"careful about the size and path name you provide.\n"
>msgstr ""
>
>#. heading text
>#: storage/src/include/loop.ycp:83
>#, ycp-format
>msgid "Edit Loop Device Setup of %1"
>msgstr ""
>
>#. heading text
>#: storage/src/include/loop.ycp:89
>msgid "Create New Loop Device Setup"
>msgstr ""
>
>#. label text
>#: storage/src/include/loop.ycp:93
>msgid "P&ath Name of File"
>msgstr ""
>
>#. label text
>#: storage/src/include/loop.ycp:95
>msgid "C&reate Loop File"
>msgstr ""
>
>#. label text
>#: storage/src/include/loop.ycp:97
>msgid "Si&ze of Loop File"
>msgstr ""
>
>#. popup text
>#: storage/src/include/loop.ycp:202
>#, ycp-format
>msgid ""
>"The file name \"%1\" is invalid.\n"
>"Use an absolute path name.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/loop.ycp:219
>#, ycp-format
>msgid ""
>"The file name \"%1\" does not exist\n"
>"and the flag for create is off. Either use an existing file or activate\n"
>"the create flag."
>msgstr ""
>
>#. popup text
>#: storage/src/include/loop.ycp:234
>msgid ""
>"You chose to create the crypt file, but did not specify \n"
>"that it should be formatted. This does not make sense. \n"
>"\n"
>"Also check the format option.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/loop.ycp:257
>msgid "Provide a mount point."
>msgstr ""
>
>#: storage/src/include/lvm_lv_lib.ycp:58
>msgid ""
>"A logical volume with the requested size could \n"
>"not be created.\n"
>msgstr ""
>
>#. message popup
>#: storage/src/include/lvm_pv_lib.ycp:72
>msgid ""
>"If you remove the selected device from the volume group,\n"
>"there will not be enough space for all logical volumes in \n"
>"this group. To delete the volume group completely, remove \n"
>"its logical volumes first.\n"
>msgstr ""
>
>#. message popup
>#: storage/src/include/lvm_pv_lib.ycp:116
>#, ycp-format
>msgid ""
>"The item %1 is already a physical volume.\n"
>"To add it to a different volume group,\n"
>"remove it from its current volume group\n"
>"then add it to the new group.\n"
>msgstr ""
>
>#. message popup
>#. Message popup
>#: storage/src/include/lvm_pv_lib.ycp:125
>#: storage/src/include/lvm_pv_lib.ycp:155 storage/src/include/raid_lib.ycp:216
>#: storage/src/include/raid_lib.ycp:244
>msgid "You have to select one device in the table"
>msgstr ""
>
>#. Message popup
>#: storage/src/include/lvm_pv_lib.ycp:148
>#, ycp-format
>msgid ""
>"The item %1 cannot be removed.\n"
>"It does not belong to a volume group.\n"
>msgstr ""
>
>#. message popup
>#: storage/src/include/lvm_pv_lib.ycp:309
>msgid ""
>"You cannot remove the last PV from a volume group.\n"
>"Delete the volume group completely instead.\n"
>msgstr ""
>
>#. Translators: the text 'do not format' must match the label in the corresponding popup!
>#: storage/src/include/lvm_pv_lib.ycp:326
>msgid ""
>"To use LVM, at least one partition of type 0x8e (or 0x83)\n"
>"is required. Change your partition table accordingly.\n"
>"In most cases, this can be done in the following way:\n"
>"click 'Create', select 'Do not format', and set the partition ID to 0x8e.\n"
>msgstr ""
>
>#. label text
>#: storage/src/include/lvm_ui_dialogs.ycp:114
>msgid "Logical volume &name "
>msgstr ""
>
>#. label text
>#: storage/src/include/lvm_ui_dialogs.ycp:129
>#: storage/src/include/lvm_ui_dialogs.ycp:143
>msgid "Logical volume name: "
>msgstr ""
>
>#. internal error message 
>#: storage/src/include/lvm_ui_dialogs.ycp:152
>msgid "INTERNAL ERROR"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/lvm_ui_dialogs.ycp:328
>#, ycp-format
>msgid ""
>"A logical volume named \"%1\" already exists\n"
>"in volume group \"%2\". Choose another name\n"
>"or cancel this dialog.\n"
>msgstr ""
>
>#. Popup text
>#: storage/src/include/lvm_ui_dialogs.ycp:418
>msgid "You can only edit logical volumes."
>msgstr ""
>
>#. Popup text
>#: storage/src/include/lvm_ui_dialogs.ycp:432
>msgid "You can only remove logical volumes."
>msgstr ""
>
>#. Popup text
>#: storage/src/include/lvm_ui_dialogs.ycp:437
>#, ycp-format
>msgid "Remove the logical volume %1?"
>msgstr ""
>
>#: storage/src/include/lvm_ui_dialogs.ycp:457
>#, ycp-format
>msgid ""
>"The volume group \"%1\" contains at least one logical \n"
>"volume. It cannot be removed. Remove all logical volumes then\n"
>"remove the volume group.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/lvm_ui_dialogs.ycp:465
>#, ycp-format
>msgid "Really remove the volume group \"%1\"?"
>msgstr ""
>
>#: storage/src/include/lvm_ui_dialogs.ycp:487
>msgid "Use &Old LVM1 Compatible Metadata Format"
>msgstr ""
>
>#. popup header
>#: storage/src/include/lvm_ui_dialogs.ycp:497
>msgid "Create a Volume Group"
>msgstr ""
>
>#. popup description
>#: storage/src/include/lvm_ui_dialogs.ycp:499
>msgid ""
>"Now we have to create a volume group.\n"
>"Typically you don't have to change anything,\n"
>"but if you are an expert, feel free to change\n"
>"our defaults:"
>msgstr ""
>
>#. label text
>#: storage/src/include/lvm_ui_dialogs.ycp:504
>msgid "Volume Group &Name:"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/lvm_ui_dialogs.ycp:545
>msgid ""
>"The data entered is invalid.\n"
>"Insert a physical extent size from\n"
>"8KB to 512MB in powers of 2, for example, \"4M\" or \"512K\"\n"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/lvm_ui_dialogs.ycp:555
>msgid ""
>"The data entered is invalid.\n"
>"Insert a group name like \"system\" or \"test\".\n"
>"Do not use ;/`, in your group name.\n"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/lvm_ui_dialogs.ycp:565
>#, ycp-format
>msgid ""
>"The volume group \"%1\" already exists.\n"
>"Choose a different name\n"
>"or cancel this dialog.\n"
>msgstr ""
>
>#. error popup text
>#: storage/src/include/lvm_ui_dialogs.ycp:574
>#, ycp-format
>msgid ""
>"The volume group name \"%1\" conflicts\n"
>"with another entry in the /dev directory.\n"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:51
>msgid ""
>"Here, create the logical \n"
>"volumes used to store your data.\n"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:56
>msgid ""
>"\n"
>"Logical volumes are\n"
>"usable almost everywhere normal disk partitions can be used.\n"
>"You can create file systems on logical volumes and use them, for example, as swap \n"
>"or as raw partitions for databases.\n"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:64
>msgid ""
>"\n"
>"If there is still unallocated\n"
>"physical storage in a volume group and you use reiserfs as your file system,\n"
>"extend a logical volume and the underlying file system while it\n"
>"is mounted and in use.\n"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:72
>msgid ""
>"\n"
>"The logical volumes need to be large enough\n"
>"to hold all the files to install now, but you do not necessarily need to\n"
>"allocate all your physical storage now. The file systems can be increased \n"
>"later while your system is in use.\n"
>"\n"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:94
>msgid "Add partitions (called physical volumes) to your volume group."
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:97
>msgid ""
>"\n"
>"The volume group forms the storage pool from which your logical volumes,\n"
>"like virtual partitions, are allocated.\n"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:103
>msgid ""
>"\n"
>"Under normal circumstances, there is no need to have more than one volume \n"
>"group. If you need more than one volume group for special reasons,\n"
>"create them here. Each volume group must have at least one partition \n"
>"that belongs to that volume group.\n"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:111
>msgid ""
>"\n"
>"Each physical volume belongs to exactly one volume group. Assign all\n"
>"partitions to use with Linux LVM to volume groups.\n"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:117
>msgid ""
>"\n"
>"Additionally, it is possible to remove volume groups \n"
>"when they do not contain any logical volumes.\n"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:136
>msgid ""
>"With this tool, manage or create logical volumes.\n"
>"\n"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:141
>msgid ""
>"<ol><li>\n"
>"First, create a volume group, if you have not done this already.\n"
>"</li>\n"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:147
>msgid ""
>"<li>\n"
>"In the next step, add physical volumes (see paragraph below).\n"
>"</li>\n"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:153
>msgid ""
>"<li>\n"
>"In the last step, create logical volumes (see paragraph below).\n"
>"</li></ol> \n"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:159
>msgid ""
>"\n"
>"Physical Volumes:"
>msgstr ""
>
>#. helptext LVM partitioning. 
>#: storage/src/include/lvm_ui_lib.ycp:163
>msgid ""
>"\n"
>"Logical Volumes:"
>msgstr ""
>
>#. label text
>#: storage/src/include/lvm_ui_lib.ycp:187
>msgid "Available size:"
>msgstr ""
>
>#. label text
>#: storage/src/include/lvm_ui_lib.ycp:198
>#: storage/src/include/lvm_ui_lib.ycp:414
>msgid "Available Size:"
>msgstr ""
>
>#. header text
>#: storage/src/include/lvm_ui_lib.ycp:215
>msgid " Device "
>msgstr ""
>
>#: storage/src/include/lvm_ui_lib.ycp:215
>msgid " Size "
>msgstr ""
>
>#: storage/src/include/lvm_ui_lib.ycp:215
>msgid " Type "
>msgstr ""
>
>#: storage/src/include/lvm_ui_lib.ycp:215
>msgid " Volume Group "
>msgstr ""
>
>#. table column headings
>#: storage/src/include/lvm_ui_lib.ycp:237
>msgid "Device "
>msgstr ""
>
>#: storage/src/include/lvm_ui_lib.ycp:237
>msgid " Mount "
>msgstr ""
>
>#. table column heading Vol.Grp = Volume Group
>#: storage/src/include/lvm_ui_lib.ycp:239
>msgid " Vol. Grp."
>msgstr ""
>
>#: storage/src/include/lvm_ui_lib.ycp:241
>msgid " Type "
>msgstr ""
>
>#. button text
>#: storage/src/include/lvm_ui_lib.ycp:247
>msgid "&View all mount points, not just the current volume group"
>msgstr ""
>
>#. button text
>#. Button in RAID-WF 
>#. button text
>#: storage/src/include/lvm_ui_lib.ycp:251 storage/src/include/raid_ui.ycp:672
>#: storage/src/inst_evms.ycp:156
>msgid "A&dd"
>msgstr ""
>
>#. button text
>#: storage/src/include/lvm_ui_lib.ycp:253
>#: storage/src/inst_custom_part.ycp:2510 storage/src/inst_evms.ycp:158
>msgid "&Edit"
>msgstr ""
>
>#. button text
>#. Button in RAID-WF 
>#. button text
>#: storage/src/include/lvm_ui_lib.ycp:255 storage/src/include/raid_ui.ycp:674
>#: storage/src/inst_evms.ycp:160
>msgid "&Remove"
>msgstr ""
>
>#. label text
>#. Label of Combobox 
>#: storage/src/include/lvm_ui_lib.ycp:279
>#: storage/src/include/lvm_ui_lib.ycp:386
>#: storage/src/include/lvm_ui_lib.ycp:409
>msgid "V&olume Group Name"
>msgstr ""
>
>#. button text
>#: storage/src/include/lvm_ui_lib.ycp:283
>#: storage/src/include/lvm_ui_lib.ycp:358
>msgid "A&dd group"
>msgstr ""
>
>#. button text
>#: storage/src/include/lvm_ui_lib.ycp:286
>#: storage/src/include/lvm_ui_lib.ycp:354
>msgid "Remove &group"
>msgstr ""
>
>#. label text
>#: storage/src/include/lvm_ui_lib.ycp:291
>msgid "Edit the current volume group:"
>msgstr ""
>
>#. label text
>#: storage/src/include/lvm_ui_lib.ycp:297
>msgid "Physical volumes"
>msgstr ""
>
>#. label text
>#: storage/src/include/lvm_ui_lib.ycp:301
>msgid "Physical volume size:"
>msgstr ""
>
>#. label text
>#: storage/src/include/lvm_ui_lib.ycp:311
>msgid "Logical volumes"
>msgstr ""
>
>#. button text
>#: storage/src/include/lvm_ui_lib.ycp:334
>msgid "LVM Multipath detection"
>msgstr ""
>
>#. button text
>#: storage/src/include/lvm_ui_lib.ycp:342
>msgid "Volume &Group:"
>msgstr ""
>
>#. label text
>#. Label in raid -wf
>#. label text
>#: storage/src/include/lvm_ui_lib.ycp:345 storage/src/include/raid_ui.ycp:617
>#: storage/src/include/raid_ui.ycp:637
>msgid "Size:"
>msgstr ""
>
>#. label text
>#: storage/src/include/lvm_ui_lib.ycp:507
>msgid "V&olume Group"
>msgstr ""
>
>#. column description, if disk space is not known
>#. label text
>#. column description, if disk space is not known
>#: storage/src/include/partition_defines.ycp:99
>#: storage/src/include/partition_defines.ycp:173
>#: storage/src/modules/Partitions.ycp:782
>msgid "unknown"
>msgstr ""
>
>#. label text, short for Megabyte (MB)
>#. label text
>#. end of not yet checked
>#. not test mode
>#. ///////////////////////////////////////////////////////////////////////
>#. END: Preliminary action
>#. ///////////////////////////////////////////////////////////////////////
>#. ///////////////////////////////////////////////////////////////////////
>#. START: GUI
>#. ///////////////////////////////////////////////////////////////////////
>#. set to "true" to test non-graphical version
>#. Unit for parition resizing - currently Megabytes
>#: storage/src/include/partition_defines.ycp:176
>#: storage/src/inst_custom_part.ycp:1640 storage/src/inst_resize_ui.ycp:584
>msgid "MB"
>msgstr ""
>
>#: storage/src/include/partition_defines.ycp:250
>msgid ""
>"It is normally not a good idea to use EVMS and non-EVMS\n"
>"entities on the same disk. \n"
>"While it is possible in principle and may make sense\n"
>"for experienced users, it also can easily create \n"
>"unexpected problems.\n"
>"\n"
>"Really do this?\n"
>msgstr ""
>
>#: storage/src/include/partition_defines.ycp:264
>msgid ""
>"It is normally not a good idea to use EVMS and LVM\n"
>"on the same system.\n"
>"While it is possible in principle and may make sense\n"
>"for experienced users, it also can easily create \n"
>"unexpected problems.\n"
>"\n"
>"Really do this?\n"
>msgstr ""
>
>#. label text
>#: storage/src/include/raid_lib.ycp:91
>msgid "R&AID:"
>msgstr ""
>
>#. Message popup
>#: storage/src/include/raid_lib.ycp:209
>#, ycp-format
>msgid ""
>"Item %1 is already a RAID device.\n"
>"You cannot add it again.\n"
>msgstr ""
>
>#. Message popup
>#: storage/src/include/raid_lib.ycp:237
>#, ycp-format
>msgid ""
>"Item %1 cannot be removed.\n"
>"It does not belong to a RAID.\n"
>msgstr ""
>
>#. Translators: the text 'do not format' must match the label in the corresponding popup!
>#: storage/src/include/raid_lib.ycp:363
>msgid ""
>"To use RAID, at least two partitions of type 0xFD (or 0x83)\n"
>"are required. Change your partition table accordingly.\n"
>"In most cases, this can be done in the following way:\n"
>"click 'Create', select 'Do not format', and set the partition ID to 0xFD.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/include/raid_ui.ycp:58
>#, ycp-format
>msgid ""
>"\n"
>"The maximum number of partitions in a software raid is %1.\n"
>"You want to add more partitions to the raid than can be\n"
>"handled by the current version of software raid.\n"
>msgstr ""
>
>#. help text
>#: storage/src/include/raid_ui.ycp:76
>msgid ""
>"RAID 0: This level increases your disk performance.\n"
>"There is NO redundancy in this mode. If one of the drives crashes, data recovery will not be possible.\n"
>msgstr ""
>
>#. help text
>#: storage/src/include/raid_ui.ycp:81
>msgid ""
>"RAID 1: This mode has the best redundancy. It can be\n"
>"used with two or more disks. This mode maintains an exact copy of all data on all\n"
>"disks. As long as at least one disk is still working, no data is lost. The partitions\n"
>"used for this type of RAID should have approximately the same size.\n"
>msgstr ""
>
>#. help text
>#: storage/src/include/raid_ui.ycp:88
>msgid ""
>"RAID 5: This mode combines management of a larger number\n"
>"of disks and still maintains some redundancy. This mode can be used on three disks or more.\n"
>"If one disk fails, all data is still intact. If two disks fail simultaneously, all data is lost\n"
>msgstr ""
>
>#. help text
>#: storage/src/include/raid_ui.ycp:94
>msgid ""
>"Multipath: This mode allow access to the same physical device\n"
>"over multiple controllers for redundancy against a fault in a controller card. This mode can be used with at least two devices\n"
>msgstr ""
>
>#. button text
>#: storage/src/include/raid_ui.ycp:120
>msgid "Auto&detect Multipath"
>msgstr ""
>
>#. Translators, 'Striping' is a technical term here. Translate only if 
>#. you are sure!! If in doubt, leave it in English.
>#: storage/src/include/raid_ui.ycp:125
>msgid "RAID &0 (Striping)"
>msgstr ""
>
>#. Translators, 'Mirroring' is a technical term here. Translate only if 
>#. you are sure!! If in doubt, leave it in English.
>#: storage/src/include/raid_ui.ycp:128
>msgid "RAID &1 (Mirroring)"
>msgstr ""
>
>#. Translators, 'Redundant Striping' is a technical term here. Translate 
>#. only if you are sure!! If in doubt, leave it in English.
>#: storage/src/include/raid_ui.ycp:131
>msgid "RAID &5 (Redundant Striping)"
>msgstr ""
>
>#. label text
>#: storage/src/include/raid_ui.ycp:133
>msgid "&Multipath (Redundant access over two controllers)"
>msgstr ""
>
>#. popup text
>#: storage/src/include/raid_ui.ycp:142
>msgid "What type of RAID would you like to create?"
>msgstr ""
>
>#. help text
>#: storage/src/include/raid_ui.ycp:174
>msgid ""
>"The list contains the devices that could be automatically\n"
>"detected for multipath setup. Disable the devices not to \n"
>"have activated by double-clicking the table line and continue when \n"
>"finished. If you go back, none of the autodetected multipath raid devices\n"
>"are created.\n"
>"If you deselect lines, the names of the raid devices \n"
>"after the deselected lines will be changed.\n"
>msgstr ""
>
>#. heading text
>#: storage/src/include/raid_ui.ycp:197
>msgid "RAID Wizard: Multipath Autodetection"
>msgstr ""
>
>#. popup text
>#: storage/src/include/raid_ui.ycp:252
>msgid ""
>"No automatically configurable\n"
>"multipath devices detected"
>msgstr ""
>
>#. heading text
>#: storage/src/include/raid_ui.ycp:277
>msgid "Create"
>msgstr ""
>
>#. heading text
>#: storage/src/include/raid_ui.ycp:279
>msgid "Raid Device"
>msgstr ""
>
>#. heading text
>#: storage/src/include/raid_ui.ycp:281
>msgid "Partition 1"
>msgstr ""
>
>#. heading text
>#: storage/src/include/raid_ui.ycp:283
>msgid "Partition 2"
>msgstr ""
>
>#. heading text
>#: storage/src/include/raid_ui.ycp:285
>msgid "Other..."
>msgstr ""
>
>#. ///////////////////////////////////////////////////////////////
>#. Choose Raid Type ...
>#. ///////////////////////////////////////////////////////////////
>#. heading text
>#: storage/src/include/raid_ui.ycp:443
>msgid "RAID Wizard: Step 1."
>msgstr ""
>
>#. popup text %1 will be replaces with button text
>#: storage/src/include/raid_ui.ycp:527
>#, ycp-format
>msgid ""
>"Changes made to your RAID setup so far will be \n"
>"lost if you exit the dialog with %1.\n"
>"Continue?\n"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/include/raid_ui.ycp:572
>msgid ""
>"Add partitions to your RAID. According to\n"
>"the RAID type, the usable disk size is the sum of these partitions (RAID0), the size\n"
>"of the smallest partition (RAID 1), or (N-1)*smallest partition (RAID 5).\n"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/include/raid_ui.ycp:578
>msgid ""
>"Generally, the partitions should be on different drives,\n"
>"to get the redundancy and performance you want.\n"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/include/raid_ui.ycp:583
>msgid ""
>"Expert options: Here, set\n"
>"things like chunk size to get the best performance\n"
>"out of your system. These settings are used for all partitions of this RAID.\n"
>msgstr ""
>
>#. Error popup text
>#: storage/src/include/raid_ui.ycp:600
>#, ycp-format
>msgid ""
>"The RAID to change (%1) is already created on disk.\n"
>"It can no longer be changed. To change %1, \n"
>"remove it and create it again.\n"
>msgstr ""
>
>#. label text
>#: storage/src/include/raid_ui.ycp:629
>msgid "RA&ID:"
>msgstr ""
>
>#. button text
>#: storage/src/include/raid_ui.ycp:645
>msgid "Remo&ve RAID"
>msgstr ""
>
>#. button text
>#: storage/src/include/raid_ui.ycp:649
>msgid "Add RAI&D"
>msgstr ""
>
>#. table header 
>#: storage/src/include/raid_ui.ycp:661
>msgid " Device "
>msgstr ""
>
>#. table header
>#. Column header: centered / minimum = 11 characters /
>#. fill with space if needed
>#: storage/src/include/raid_ui.ycp:663 storage/src/inst_custom_part.ycp:2385
>msgid " Size "
>msgstr ""
>
>#. table header
>#: storage/src/include/raid_ui.ycp:665
>msgid " Type "
>msgstr ""
>
>#. table header
>#: storage/src/include/raid_ui.ycp:667
>msgid " RAID "
>msgstr ""
>
>#. help text
>#: storage/src/include/raid_ui.ycp:692
>msgid ""
>"chunk size: It is the smallest \"atomic\" mass\n"
>"of data that can be written to the devices. A reasonable chunk size for RAID 5 is 128KB. For RAID 0,\n"
>"32 KB is a good starting point. For RAID 1, the chunk size does not affect the array very much.\n"
>msgstr ""
>
>#. help text
>#: storage/src/include/raid_ui.ycp:698
>msgid ""
>"parity algorithm: The parity algorithm to use with RAID5.\n"
>"Left-symmetric is the one that offers maximum performance on typical disks with rotating platters.\n"
>msgstr ""
>
>#. heading text
>#: storage/src/include/raid_ui.ycp:716
>#, ycp-format
>msgid "Raid settings %1"
>msgstr ""
>
>#. heading text
>#: storage/src/include/raid_ui.ycp:767
>msgid "RAID Wizard Step 3:"
>msgstr ""
>
>#. heading text
>#: storage/src/include/raid_ui.ycp:905
>msgid "RAID Wizard Step 2:"
>msgstr ""
>
>#. heading text
>#: storage/src/include/raid_ui.ycp:913
>msgid "RAID settings"
>msgstr ""
>
>#. label text
>#: storage/src/include/raid_ui.ycp:922
>#, ycp-format
>msgid "Current RAID: /dev/md%1"
>msgstr ""
>
>#. popup text
>#: storage/src/include/raid_ui.ycp:1024
>#, ycp-format
>msgid "Do you really want to delete partition %1?"
>msgstr ""
>
>#. Error popup text
>#: storage/src/include/raid_ui.ycp:1118
>#, ycp-format
>msgid "For RAID 0, add at least two partitions to %1."
>msgstr ""
>
>#. Error popup text
>#: storage/src/include/raid_ui.ycp:1123
>#, ycp-format
>msgid "For RAID 1, add at least two partitions to %1."
>msgstr ""
>
>#. Error popup text
>#: storage/src/include/raid_ui.ycp:1128
>#, ycp-format
>msgid "For RAID 5, add at least three partitions to %1."
>msgstr ""
>
>#. Error popup text
>#: storage/src/include/raid_ui.ycp:1133
>#, ycp-format
>msgid "For RAID 6, add at least four partitions to %1."
>msgstr ""
>
>#. Error popup text
>#: storage/src/include/raid_ui.ycp:1138
>#, ycp-format
>msgid "For RAID 10, add at least two partitions to %1."
>msgstr ""
>
>#. Error popup text
>#: storage/src/include/raid_ui.ycp:1143
>#, ycp-format
>msgid "For Multipath raid, add at least two partitions to %1."
>msgstr ""
>
>#. label text
>#: storage/src/inst_custom_part.ycp:989
>#, ycp-format
>msgid "DISK %1"
>msgstr ""
>
>#. error popup text
>#: storage/src/inst_custom_part.ycp:1222
>msgid ""
>"Invalid input for the start of the partition.\n"
>"Enter the start cylinder, for example, 77.\n"
>msgstr ""
>
>#. error popup text
>#: storage/src/inst_custom_part.ycp:1239
>msgid "The value entered is invalid. Try again."
>msgstr ""
>
>#. error popup text
>#: storage/src/inst_custom_part.ycp:1250
>msgid ""
>"The value for the partition end is invalid.\n"
>"\n"
>"Enter the end cylinder number (such as 77), an offset (like +122),\n"
>"or the size of the partition (for example, +100M or 1.8GB )\n"
>msgstr ""
>
>#. //////////////// STEP E /////////////////////
>#. error popup text, %1, %2, %3 is replaced by numeric value
>#: storage/src/inst_custom_part.ycp:1269
>#, ycp-format
>msgid ""
>"\n"
>"The value of the end cylinder %1 was not valid.\n"
>"The value must be between %2 and %3.\n"
>"\n"
>"Use the maximum allowed value\n"
>"or select No and enter a correct value yourself.\n"
>"\n"
>"Use the maximum allowed value?\n"
>msgstr ""
>
>#. popup text
>#: storage/src/inst_custom_part.ycp:1507
>msgid ""
>"\n"
>"You have changed the FSID of an existing partition.\n"
>"In some cases, this could have serious consequences, especially\n"
>"if you change the FSID of a partition belonging to a different\n"
>"operating system. Only proceed if you know exactly\n"
>"what you are doing.\n"
>msgstr ""
>
>#: storage/src/inst_custom_part.ycp:1618
>#, ycp-format
>msgid ""
>"Partition %1 cannot be resized\n"
>"because the file system seems to be inconsistent.\n"
>msgstr ""
>
>#: storage/src/inst_custom_part.ycp:1646
>msgid "GB"
>msgstr ""
>
>#. label text %1 is replaced by a number
>#. Labels for bar graph. "%1" will be replace with a numeric value.
>#: storage/src/inst_custom_part.ycp:1669 storage/src/inst_resize_ui.ycp:587
>#, ycp-format
>msgid ""
>"Windows\n"
>"Used\n"
>"%1 "
>msgstr ""
>
>#. label text %1 is replaced by a number
>#. Labels for bar graph. "%1" will be replace with a numeric value.
>#: storage/src/inst_custom_part.ycp:1671 storage/src/inst_resize_ui.ycp:589
>#, ycp-format
>msgid ""
>"Windows\n"
>"Free\n"
>"%1 "
>msgstr ""
>
>#. label text %1 is replaced by a number
>#: storage/src/inst_custom_part.ycp:1673
>#, ycp-format
>msgid ""
>"Linux\n"
>"Size\n"
>"%1 "
>msgstr ""
>
>#. label text %1 is replaced by a number
>#: storage/src/inst_custom_part.ycp:1678
>#, ycp-format
>msgid ""
>"Space\n"
>"Used\n"
>"%1 "
>msgstr ""
>
>#. label text %1 is replaced by a number
>#: storage/src/inst_custom_part.ycp:1682
>#, ycp-format
>msgid ""
>"Swap\n"
>"Space\n"
>"%1 "
>msgstr ""
>
>#. label text %1 is replaced by a number
>#: storage/src/inst_custom_part.ycp:1687
>#, ycp-format
>msgid ""
>"Space\n"
>"Free\n"
>"%1 "
>msgstr ""
>
>#. label text, %1 is replaced by a number
>#: storage/src/inst_custom_part.ycp:1690
>#, ycp-format
>msgid ""
>"Unused\n"
>"Disk\n"
>"%1 "
>msgstr ""
>
>#. label text, %1 is replaced by a unit value ("MB")
>#. Labels for input fields. "%1" will be replaced with the current unit (MB).
>#: storage/src/inst_custom_part.ycp:1699 storage/src/inst_resize_ui.ycp:594
>#, ycp-format
>msgid "Windows Free (%1)"
>msgstr ""
>
>#. label text, %1 is replaced by a unit value ("MB")
>#: storage/src/inst_custom_part.ycp:1701
>#, ycp-format
>msgid "Linux Size (%1)"
>msgstr ""
>
>#. label text, %1 is replaced by a unit value ("MB")
>#: storage/src/inst_custom_part.ycp:1706
>#, ycp-format
>msgid "Unused Disk (%1)"
>msgstr ""
>
>#. label text, %1 is replaced by a unit value ("MB")
>#: storage/src/inst_custom_part.ycp:1710
>#, ycp-format
>msgid "Swap Space (%1) "
>msgstr ""
>
>#. label text, %1 is replaced by a unit value ("MB")
>#: storage/src/inst_custom_part.ycp:1715
>#, ycp-format
>msgid "Space Free (%1)"
>msgstr ""
>
>#. Message text. %1 and %2 are numbers. %3 is the unit.
>#: storage/src/inst_custom_part.ycp:1741
>#, ycp-format
>msgid ""
>"Your NTFS file system has %1 %3 free space available. Due to limitations in\n"
>"the NTFS resizer, the file system can only be shrunk by up to %2 %3.\n"
>"To be able to shrink the file system more, boot your Windows\n"
>"system and run a disk defragmentation program under Windows to move\n"
>"the used blocks of the file system towards the start of the partition.\n"
>msgstr ""
>
>#. label text
>#: storage/src/inst_custom_part.ycp:1771
>msgid "Windows"
>msgstr ""
>
>#. Help text for partition resizing -
>#. common part for both graphical mode (with bar graphs)
>#. and non-graphical mode (text only).
>#. %1 is OS label, such as Windows
>#: storage/src/inst_custom_part.ycp:1778
>#, ycp-format
>msgid ""
>"\n"
>"Choose the new size for your %1 partition.\n"
>""
>msgstr ""
>
>#. help text (common to both modes), continued
>#. %1 is OS label, such as Windows
>#: storage/src/inst_custom_part.ycp:1784
>#, ycp-format
>msgid ""
>"\n"
>"\n"
>"The actual resizing is performed only after you confirm all your\n"
>"settings in the last installation dialog. Until then, your %1\n"
>"partition will remain untouched.\n"
>""
>msgstr ""
>
>#. help text (common to both modes), continued
>#: storage/src/inst_custom_part.ycp:1792
>msgid ""
>"\n"
>"\n"
>"If you decide not to resize your partition, press\n"
>"Do Not Resize. This resets the values to the original\n"
>"size of the partition.\n"
>"\n"
>msgstr ""
>
>#. help text, continued - graphical mode only
>#. this text will be appended to the help text common to both modes.
>#: storage/src/inst_custom_part.ycp:1805
>msgid ""
>"\n"
>"\n"
>"The upper bar graph displays the current situation.\n"
>"The lower bar graph displays the situation after the installation (after\n"
>"the partition resize).\n"
>""
>msgstr ""
>
>#. help text (graphical mode), continued
>#: storage/src/inst_custom_part.ycp:1812 storage/src/inst_resize_ui.ycp:669
>msgid ""
>"\n"
>"\n"
>"Drag the slider or enter a numeric value in either\n"
>"input field to adjust the suggested value.\n"
>""
>msgstr ""
>
>#. Headline above bar graph that displays current partition size
>#. Headline above bar graph that displays current windows partition size
>#: storage/src/inst_custom_part.ycp:1845 storage/src/inst_resize_ui.ycp:633
>msgid "Now"
>msgstr ""
>
>#. Headline above bar graph that displays future partitions
>#. Headline above bar graph that displays future windows and linux partitions
>#: storage/src/inst_custom_part.ycp:1850 storage/src/inst_resize_ui.ycp:644
>msgid "After Installation"
>msgstr ""
>
>#. Button text
>#: storage/src/inst_custom_part.ycp:1860 storage/src/inst_custom_part.ycp:1929
>msgid "&Do Not Resize"
>msgstr ""
>
>#. help text, continued - non-graphical mode only
>#. this help text will be appended to the help text common to both modes.
>#. %1 is OS label, such as Windows
>#: storage/src/inst_custom_part.ycp:1873
>#, ycp-format
>msgid ""
>"\n"
>"Enter a value for the size to which to shrink the %1 partition.\n"
>""
>msgstr ""
>
>#. Label text
>#. Label for used part of the Windows partition in non-graphical mode
>#: storage/src/inst_custom_part.ycp:1881 storage/src/inst_resize_ui.ycp:688
>msgid "Windows Used"
>msgstr ""
>
>#. Label text
>#: storage/src/inst_custom_part.ycp:1886
>msgid "Used"
>msgstr ""
>
>#. help text (non-graphical mode), continued
>#. %1 is label text, such as Used. %2 is OS, such as Windows.
>#: storage/src/inst_custom_part.ycp:1890
>#, ycp-format
>msgid ""
>"\n"
>"\n"
>"%1 is the size of the used part of your %2 partition.\n"
>""
>msgstr ""
>
>#. help text (non-graphical mode), continued
>#: storage/src/inst_custom_part.ycp:1896
>msgid ""
>"\n"
>"Free indicates the current free space (before shrinking)\n"
>"of the partition.\n"
>""
>msgstr ""
>
>#. Label for free part of the partition in non-graphical mode
>#. Label for free part of the Windows partition in non-graphical mode
>#: storage/src/inst_custom_part.ycp:1916 storage/src/inst_resize_ui.ycp:695
>msgid "Free"
>msgstr ""
>
>#. Edit field label for linux partition size in non-graphical mode
>#: storage/src/inst_custom_part.ycp:1922
>msgid "New Size"
>msgstr ""
>
>#. warning popup text
>#: storage/src/inst_custom_part.ycp:2115
>msgid ""
>"You have changed the start or end cylinders.\n"
>"Make sure that all logical partitions\n"
>"fit into this new extended partition.\n"
>msgstr ""
>
>#: storage/src/inst_custom_part.ycp:2176
>#: storage/src/inst_target_selection.ycp:88
>msgid "Available &Disks"
>msgstr ""
>
>#: storage/src/inst_custom_part.ycp:2241
>msgid "There are no partitionable Disks available."
>msgstr ""
>
>#: storage/src/inst_custom_part.ycp:2244
>msgid "You may use dasdfmt in Expert-Button to low level format disks."
>msgstr ""
>
>#. menue entry text
>#: storage/src/inst_custom_part.ycp:2256
>msgid "&Create RAID..."
>msgstr ""
>
>#. menu entry text
>#: storage/src/inst_custom_part.ycp:2260
>msgid "&Edit RAID"
>msgstr ""
>
>#. button text
>#: storage/src/inst_custom_part.ycp:2262
>msgid "&RAID..."
>msgstr ""
>
>#. menue entry text
>#: storage/src/inst_custom_part.ycp:2270
>msgid "&Create Crypt File"
>msgstr ""
>
>#. menue entry text
>#: storage/src/inst_custom_part.ycp:2274
>msgid "&Edit Crypt File"
>msgstr ""
>
>#. button text
>#: storage/src/inst_custom_part.ycp:2276
>msgid "Cr&ypt File..."
>msgstr ""
>
>#. button text
>#: storage/src/inst_custom_part.ycp:2292 storage/src/inst_custom_part.ycp:2298
>#: storage/src/inst_custom_part.ycp:2304
>msgid "&Primary Partition"
>msgstr ""
>
>#. button text
>#: storage/src/inst_custom_part.ycp:2294 storage/src/inst_custom_part.ycp:2306
>msgid "&Logical Partition"
>msgstr ""
>
>#. button text
>#: storage/src/inst_custom_part.ycp:2300 storage/src/inst_custom_part.ycp:2308
>msgid "&Extended Partition"
>msgstr ""
>
>#. heading in a popup dialog
>#: storage/src/inst_custom_part.ycp:2317
>msgid "Partition Type"
>msgstr ""
>
>#. complete sentence, appended after other complete sentences.
>#: storage/src/inst_custom_part.ycp:2355
>msgid "No extended partition exists."
>msgstr ""
>
>#. complete sentence, appended after other complete sentences.
>#: storage/src/inst_custom_part.ycp:2358
>msgid "There are already four primary and extended partitions."
>msgstr ""
>
>#. complete sentence, appended after other complete sentences.
>#: storage/src/inst_custom_part.ycp:2361
>msgid "No space is left in the extended partition."
>msgstr ""
>
>#. complete sentence, appended after other complete sentences.
>#: storage/src/inst_custom_part.ycp:2364
>msgid "Too many logical drives already exist."
>msgstr ""
>
>#. complete sentence, appended after other complete sentences.
>#: storage/src/inst_custom_part.ycp:2367
>msgid "No space remains."
>msgstr ""
>
>#. complete sentence, appended after other complete sentences.
>#: storage/src/inst_custom_part.ycp:2370
>msgid "An extended partition already exists."
>msgstr ""
>
>#. Column header
>#: storage/src/inst_custom_part.ycp:2381
>msgid "ID"
>msgstr ""
>
>#. Column header: centered / minimum = 3 characters /
>#. fill with space if needed
>#: storage/src/inst_custom_part.ycp:2389
>msgid " F "
>msgstr ""
>
>#. Column header
>#: storage/src/inst_custom_part.ycp:2392 storage/src/inst_evms.ycp:153
>msgid "Type"
>msgstr ""
>
>#. Column header: centered / minimum = 7 characters /
>#. fill with space if needed
>#: storage/src/inst_custom_part.ycp:2396
>msgid " Mount "
>msgstr ""
>
>#. Column header
>#: storage/src/inst_custom_part.ycp:2399
>msgid "Mount By"
>msgstr ""
>
>#. Column header: minimum = 5 characters fill with space if needed
>#: storage/src/inst_custom_part.ycp:2402
>msgid "Start"
>msgstr ""
>
>#. Column header: minimum = 4 characters fill with space if needed
>#: storage/src/inst_custom_part.ycp:2405
>msgid "End "
>msgstr ""
>
>#. Column header
>#: storage/src/inst_custom_part.ycp:2408
>msgid "Used By"
>msgstr ""
>
>#. Column header
>#: storage/src/inst_custom_part.ycp:2411
>msgid "Label"
>msgstr ""
>
>#. Column header
>#: storage/src/inst_custom_part.ycp:2414
>msgid "Device ID"
>msgstr ""
>
>#. Column header
>#: storage/src/inst_custom_part.ycp:2417
>msgid "Device Path"
>msgstr ""
>
>#. complete sentence. gets combined with other sentences.
>#: storage/src/inst_custom_part.ycp:2444
>msgid "A primary partition can be created.\n"
>msgstr ""
>
>#. complete sentence. gets combined with other sentences.
>#: storage/src/inst_custom_part.ycp:2447
>msgid "A primary partition cannot be created."
>msgstr ""
>
>#. complete sentence. gets combined with other sentences.
>#: storage/src/inst_custom_part.ycp:2452
>msgid "A logical partition can be created.\n"
>msgstr ""
>
>#. complete sentence. gets combined with other sentences.
>#: storage/src/inst_custom_part.ycp:2456
>msgid "A logical partition cannot be created."
>msgstr ""
>
>#. complete sentence. gets combined with other sentences.
>#: storage/src/inst_custom_part.ycp:2461
>msgid "An extended partition can be created.\n"
>msgstr ""
>
>#. complete sentence. gets combined with other sentences.
>#: storage/src/inst_custom_part.ycp:2465
>msgid "An extended partition cannot be created."
>msgstr ""
>
>#: storage/src/inst_custom_part.ycp:2506
>msgid "&Create"
>msgstr ""
>
>#: storage/src/inst_custom_part.ycp:2515
>msgid "&Delete"
>msgstr ""
>
>#: storage/src/inst_custom_part.ycp:2520
>msgid "Re&size"
>msgstr ""
>
>#. menu entry text
>#: storage/src/inst_custom_part.ycp:2529
>msgid "&Reread Partition Table"
>msgstr ""
>
>#. menu entry text
>#: storage/src/inst_custom_part.ycp:2535
>msgid "&Import Mount Points from Existing /etc/fstab"
>msgstr ""
>
>#. menu entry text
>#: storage/src/inst_custom_part.ycp:2541
>msgid "Delete Partition &Table and Disk Label"
>msgstr ""
>
>#. menu entry text
>#: storage/src/inst_custom_part.ycp:2548
>msgid "Execute dasd&fmt on the DASD Device"
>msgstr ""
>
>#. button text using case-senstive command name. dasdfmt should not normally be translated.
>#: storage/src/inst_custom_part.ycp:2551
>msgid "dasd&fmt"
>msgstr ""
>
>#. main dialog: Button LVM
>#: storage/src/inst_custom_part.ycp:2559
>msgid "&LVM..."
>msgstr ""
>
>#. main dialog: Button EVMS
>#: storage/src/inst_custom_part.ycp:2563
>msgid "E&VMS..."
>msgstr ""
>
>#: storage/src/inst_custom_part.ycp:2586
>msgid "&Show Details"
>msgstr ""
>
>#. heading text
>#: storage/src/inst_custom_part.ycp:2627
>msgid "Expert Partitioner"
>msgstr ""
>
>#. popup text
>#: storage/src/inst_custom_part.ycp:2677
>msgid "Disk to Partition"
>msgstr ""
>
>#. popup text , %1 is replaced by a disk name e.g. /dev/hda
>#: storage/src/inst_custom_part.ycp:2769
>#, ycp-format
>msgid "It is not possible to create a partition on %1."
>msgstr ""
>
>#. popup text , %1 is replaced by a disk name e.g. /dev/hda
>#. %2 is replaced by an explanation
>#: storage/src/inst_custom_part.ycp:2775
>#, ycp-format
>msgid ""
>"It is not possible to create a partition on %1.\n"
>"\n"
>"%2\n"
>msgstr ""
>
>#. Popup Create Partition: Description of partition %1 is for example "/dev/hda"
>#: storage/src/inst_custom_part.ycp:2834
>#, ycp-format
>msgid " Create a Primary Partition on %1 "
>msgstr ""
>
>#. Popup Create Partition: Description of partition %1 is for example "/dev/hda"
>#: storage/src/inst_custom_part.ycp:2836
>#, ycp-format
>msgid " Create an Extended Partition on %1 "
>msgstr ""
>
>#. Popup Create Partition: Description of partition %1 is for example "/dev/hda"
>#: storage/src/inst_custom_part.ycp:2838
>#, ycp-format
>msgid " Create a Logical Partition on %1 "
>msgstr ""
>
>#. header of the dialog edit a partition
>#: storage/src/inst_custom_part.ycp:2997
>msgid "Edit an Extended Partition"
>msgstr ""
>
>#. error popup text
>#: storage/src/inst_custom_part.ycp:3011
>msgid ""
>"An already-existing extended partition cannot be changed.\n"
>"Delete this partition then create a new one using\n"
>"the new parameters.\n"
>"All data on this partition will be lost if you delete it."
>msgstr ""
>
>#. header of the dialog to edit a partition %1 is replaced by device name (e.g. /dev/hda1)
>#: storage/src/inst_custom_part.ycp:3024
>#, ycp-format
>msgid "Edit Existing Partition %1"
>msgstr ""
>
>#: storage/src/inst_custom_part.ycp:3028
>#, ycp-format
>msgid "Edit Existing Device %1"
>msgstr ""
>
>#. header of the dialog to edit a partition %1 is replaced by device name (e.g. /dev/hda1)
>#: storage/src/inst_custom_part.ycp:3035
>#, ycp-format
>msgid "Edit Partition %1"
>msgstr ""
>
>#. popup text
>#: storage/src/inst_custom_part.ycp:3064
>msgid "Select the partition to edit in the main dialog."
>msgstr ""
>
>#: storage/src/inst_custom_part.ycp:3107
>#, ycp-format
>msgid "Really delete BIOS RAID %1?"
>msgstr ""
>
>#. YesNo popup text %1 is replaced by a disk name e.g. /dev/hda
>#: storage/src/inst_custom_part.ycp:3114
>#, ycp-format
>msgid "Really delete all partitions on %1?"
>msgstr ""
>
>#. YesNo popup. %1 is path to a file
>#: storage/src/inst_custom_part.ycp:3168
>#, ycp-format
>msgid ""
>"\n"
>"Should the loop file %1 also be removed?\n"
>msgstr ""
>
>#. popup text
>#: storage/src/inst_custom_part.ycp:3228
>msgid ""
>"\n"
>"You cannot resize a disk device, LVM volume group, LVM physical volume,\n"
>"or MD device.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/inst_custom_part.ycp:3237
>msgid ""
>"\n"
>"You cannot resize the selected partition because the file system\n"
>"on this partition does not support resizing.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/inst_custom_part.ycp:3276
>msgid ""
>"\n"
>"You decreased the size available for Linux partitions.\n"
>"Linux partition sizes have been adapted accordingly.\n"
>"Check the new sizes in the partition list.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/inst_custom_part.ycp:3286
>msgid ""
>"\n"
>"You decreased a partition that is followed by a newly-created partition.\n"
>"Should the newly-created partition be automatically increased to use the\n"
>"freed disk space?\n"
>msgstr ""
>
>#. heading text
>#: storage/src/inst_custom_part.ycp:3311
>msgid "Delete Partition Table"
>msgstr ""
>
>#: storage/src/inst_custom_part.ycp:3332
>#, ycp-format
>msgid ""
>"Running dasdfmt deletes all data on the disk.\n"
>"Really execute dasdfmt on disk %1?\n"
>msgstr ""
>
>#: storage/src/inst_custom_part.ycp:3343
>msgid ""
>"The disk is no longer marked for dasdfmt.\n"
>"\n"
>"Partitions currently present on this disk are again\n"
>"displayed.\n"
>msgstr ""
>
>#. popup text
>#: storage/src/inst_custom_part.ycp:3354
>msgid ""
>"No DASD disk selected.\n"
>"Select the DASD disk on which dasdfmt should be executed."
>msgstr ""
>
>#. popup text
>#: storage/src/inst_custom_part.ycp:3370
>msgid "Rereading the partition table cancels all current changes. Really reread the partition table?"
>msgstr ""
>
>#. popup text
>#: storage/src/inst_custom_part.ycp:3401
>msgid "Select a loop device entry."
>msgstr ""
>
>#. popup text %1 will be replaces with button text
>#: storage/src/inst_custom_part.ycp:3487
>#, ycp-format
>msgid ""
>"You have changed the partitioning.\n"
>"These changes are lost if you exit the main dialog with %1.\n"
>"Really quit the main dialog?\n"
>msgstr ""
>
>#. label text
>#: storage/src/inst_evms.ycp:116
>msgid "Available"
>msgstr ""
>
>#. button text
>#: storage/src/inst_evms.ycp:134
>msgid "C&reate Container"
>msgstr ""
>
>#. button text
>#: storage/src/inst_evms.ycp:138
>msgid "&Edit Container"
>msgstr ""
>
>#. button text
>#: storage/src/inst_evms.ycp:142
>msgid "&Remove Container"
>msgstr ""
>
>#: storage/src/inst_evms.ycp:152
>msgid "Format"
>msgstr ""
>
>#: storage/src/inst_evms.ycp:152
>msgid " Mount"
>msgstr ""
>
>#. heading text
>#: storage/src/inst_evms.ycp:172
>msgid "EVMS Configuration"
>msgstr ""
>
>#. popup text 
>#: storage/src/inst_evms.ycp:329
>msgid ""
>"You have changed the EVMS configuration.\n"
>"These changes will be lost if you exit the dialog now.\n"
>"Continue?\n"
>msgstr ""
>
>#. heading text
>#: storage/src/inst_lvm_lv.ycp:75
>msgid "Logical Volume Manager: Logical Volumes"
>msgstr ""
>
>#. popup text %1 is replaced by a volume group name 
>#: storage/src/inst_lvm_lv.ycp:182
>#, ycp-format
>msgid "There is no available space in volume group %1."
>msgstr ""
>
>#. heading text
>#: storage/src/inst_lvm_pv.ycp:61
>msgid "Logical Volume Manager: Physical Volume Setup"
>msgstr ""
>
>#: storage/src/inst_lvm_pv.ycp:266
>#, ycp-format
>msgid ""
>"The volume group %1 does not have \n"
>"any physical volumes assigned. This is not possible.\n"
>"Either remove this volume group or add at least\n"
>"one physical volume to it.\n"
>msgstr ""
>
>#. Title for dialogue
>#: storage/src/inst_part_proposal.ycp:89
>msgid "Suggested Partitioning"
>msgstr ""
>
>#. Radiobutton for partition dialog
>#: storage/src/inst_part_proposal.ycp:91
>msgid "&Accept Proposal"
>msgstr ""
>
>#. Radiobutton for partition dialog
>#: storage/src/inst_part_proposal.ycp:93
>msgid "Ba&se Partition Setup on This Proposal"
>msgstr ""
>
>#. Radiobutton for partition dialog
>#: storage/src/inst_part_proposal.ycp:95
>msgid "&Create Custom Partition Setup"
>msgstr ""
>
>#. popup text, richtext format
>#: storage/src/inst_part_proposal.ycp:107
>msgid "You rejected the proposal. Use one of the options to continue partitioning."
>msgstr ""
>
>#. Frame description in suggested partition for mode accept modify ..
>#. label text
>#: storage/src/inst_part_proposal.ycp:132
>#: storage/src/proposal/partitions_proposal.ycp:188
>msgid "Partitioning"
>msgstr ""
>
>#. help on suggested partitioning
>#: storage/src/inst_part_proposal.ycp:152
>msgid ""
>"\n"
>"Your hard disks have been checked. The partition setup\n"
>"displayed is proposed for your hard drive."
>msgstr ""
>
>#. help text continued
>#. %1 is replaced by button text
>#: storage/src/inst_part_proposal.ycp:158
>#, ycp-format
>msgid ""
>"\n"
>"To accept these suggestions and continue, select\n"
>"%1.\n"
>msgstr ""
>
>#. help text continued
>#. %1 is replaced by button text
>#: storage/src/inst_part_proposal.ycp:165
>#, ycp-format
>msgid ""
>"\n"
>"If you want to do only small adjustments to the proposed\n"
>"setup (like e.g. changing filesystem types) choose\n"
>"%1 and do these modification in expert\n"
>"partioner dialog.\n"
>msgstr ""
>
>#. help text continued
>#: storage/src/inst_part_proposal.ycp:173
>#, ycp-format
>msgid ""
>"\n"
>"If the suggestion does not fit your needs, create\n"
>"your own partition setup starting with the partitions as\n"
>"currently present on the disks. For this, select\n"
>"%1.\n"
>"This is also the option to choose for\n"
>"advanced options like RAID and encryption.\n"
>msgstr ""
>
>#. help text continued
>#. %1 is replaced by button text
>#: storage/src/inst_part_proposal.ycp:185
>msgid ""
>"\n"
>"To create a LVM or EVMS based proposal choose the corresponding button."
>msgstr ""
>
>#. help text continued
>#. %1 is replaced by button text
>#: storage/src/inst_part_proposal.ycp:190
>msgid ""
>"\n"
>"To create a LVM based proposal choose the corresponding button."
>msgstr ""
>
>#: storage/src/inst_part_proposal.ycp:264
>msgid "Impossible to create the reuquested proposal."
>msgstr ""
>
>#. html-format
>#. advise the user to wait for completion
>#. part 1 of 2
>#: storage/src/inst_prepdisk.ycp:56
>msgid ""
>"\n"
>"Please wait while your hard disk is prepared for installation...\n"
>" "
>msgstr ""
>
>#: storage/src/inst_prepdisk.ycp:61
>msgid ""
>"\n"
>"Please wait while your hard disk is prepared...\n"
>" "
>msgstr ""
>
>#. rich-text format help text part 2 of 2
>#: storage/src/inst_prepdisk.ycp:66
>msgid ""
>"\n"
>"Depending on the size of your hard disk and your processor speed, this action\n"
>"might take some time. Five minutes are not unusual for disks larger than 4 GB.\n"
>"Often, the progress meter does not show a linear progress. Even if it looks\n"
>"slow near the end (\"95 %\"), please be patient. The formatting tool \n"
>"performs various checks. "
>msgstr ""
>
>#. hard disk will be made ready for installing Linux
>#: storage/src/inst_prepdisk.ycp:81
>msgid "Preparing Your Hard Disk"
>msgstr ""
>
>#: storage/src/inst_prepdisk.ycp:100
>#, ycp-format
>msgid ""
>"Failure occurred during following action:\n"
>"%2\n"
>"\n"
>"System error code was: %1\n"
>msgstr ""
>
>#. An internal error has occured. Tell the user that the installation should
>#. be terminated now and that his hard disk has not been altered yet.
>#: storage/src/inst_resize_ui.ycp:216
>msgid ""
>"An internal error has occurred.\n"
>"\n"
>"\t You cannot shrink your Windows partition during\n"
>"\t installation. Your hard disk has not been altered.\n"
>"\n"
>"\t Abort the installation now and shrink your\n"
>"\t Windows partition by other means.\n"
>"\t "
>msgstr ""
>
>#. The Windows partition has not enough free space for Linux. Tell the user the needed amount
>#. of free space and that he should terminate the installation now.
>#: storage/src/inst_resize_ui.ycp:502
>#, ycp-format
>msgid ""
>"An error has occurred.\n"
>"\n"
>"Insufficient space is available on the Windows partition to allow for\n"
>"the minimum Linux installation.\n"
>"\n"
>"To install Linux, first boot Windows and uninstall some \n"
>"applications or delete some data.\n"
>"\n"
>"You need at least %1 MB of free space on the\n"
>"Windows device, including Windows workspace and\n"
>"space for %2.\n"
>msgstr ""
>
>#. Inform the user that his Windows partition is being checked.
>#: storage/src/inst_resize_ui.ycp:530
>msgid ""
>"Checking the file system of your Windows partition\n"
>"for consistency.\n"
>"\n"
>"Depending on the size of your Windows partition\n"
>"and the amount of space used, this may take a while.\n"
>"\n"
>msgstr ""
>
>#. The file system on the device is faulty. Tell the user he should correct those errors.
>#: storage/src/inst_resize_ui.ycp:551
>msgid ""
>"An error has occurred.\n"
>"\n"
>"Your Windows partition has errors in the file system.\n"
>"\n"
>"Boot Windows and clear those errors by running\n"
>"scandisk and defrag.\n"
>"\n"
>"If the problem occurs again next time, resize your\n"
>"Windows partition by other means.\n"
>msgstr ""
>
>#. Labels for bar graph. "%1" will be replace with a numeric value.
>#: storage/src/inst_resize_ui.ycp:591
>#, ycp-format
>msgid ""
>"Linux\n"
>"%1 "
>msgstr ""
>
>#. Labels for input fields. "%1" will be replaced with the current unit (MB).
>#: storage/src/inst_resize_ui.ycp:596
>#, ycp-format
>msgid "Linux (%1)"
>msgstr ""
>
>#. Help text for Windows partition resizing -
>#. common part for both graphical mode (with bar graphs)
>#. and non-graphical mode (text only).
>#: storage/src/inst_resize_ui.ycp:605
>msgid ""
>"\n"
>"Choose the new size for your Windows partition.\n"
>""
>msgstr ""
>
>#. help text (common to both modes), continued
>#: storage/src/inst_resize_ui.ycp:610
>msgid ""
>"\n"
>"\n"
>"The actual resizing will be performed only after you confirm all your\n"
>"settings in the last installation dialog. Until then, your Windows\n"
>"partition will remain untouched.\n"
>""
>msgstr ""
>
>#. help text (common to both modes), continued
>#: storage/src/inst_resize_ui.ycp:618
>msgid ""
>"\n"
>"\n"
>"To skip resizing your Windows partition, press\n"
>"Back.\n"
>"\n"
>msgstr ""
>
>#. help text, continued - graphical mode only
>#. this help text will be appended to the help text common to both modes.
>#: storage/src/inst_resize_ui.ycp:660
>msgid ""
>"\n"
>"\n"
>"The upper bar graph displays the current situation.\n"
>"The lower bar graph displays the situation after the installation (after\n"
>"the partition resize).\n"
>"\n"
>msgstr ""
>
>#. help text (graphical mode), continued
>#: storage/src/inst_resize_ui.ycp:676
>msgid ""
>"\n"
>"\n"
>"Within the space you reserve for Linux, partitions will automatically be\n"
>"created as necessary.\n"
>""
>msgstr ""
>
>#. Edit field label for linux partition size in non-graphical mode
>#: storage/src/inst_resize_ui.ycp:702
>msgid "Linux"
>msgstr ""
>
>#. help text, continued - non-graphical mode only
>#. this help text will be appended to the help text common to both modes.
>#: storage/src/inst_resize_ui.ycp:717
>msgid ""
>"\n"
>"Enter a value for the size of your Linux installation.\n"
>"The partitions will automatically be created within this range\n"
>"as required for &product;.\n"
>"\n"
>msgstr ""
>
>#. help text (non-graphical mode), continued
>#: storage/src/inst_resize_ui.ycp:725
>msgid ""
>"\n"
>"\n"
>"Windows Used is the size of the used part of your Windows partition.\n"
>""
>msgstr ""
>
>#. help text (non-graphical mode), continued
>#: storage/src/inst_resize_ui.ycp:731
>msgid ""
>"\n"
>"Free indicates the current free space (before the Linux\n"
>"installation) on the partition.\n"
>""
>msgstr ""
>
>#. Set the dialog header
>#: storage/src/inst_resize_ui.ycp:739
>msgid "Resizing the Windows Partition"
>msgstr ""
>
>#: storage/src/inst_resize_ui.ycp:819
>msgid "The available space is not sufficient for an installation."
>msgstr ""
>
>#. popup text
>#: storage/src/inst_target_part.ycp:112
>msgid "Your system can only be configured with the custom partitioning option."
>msgstr ""
>
>#. The Windows version is Windows NT or Windows 2000. Tell the user that this is currently
>#. not supported and that he can go back in the installation or abort it.
>#: storage/src/inst_target_part.ycp:264
>#, ycp-format
>msgid ""
>"An error has occurred.\n"
>"\n"
>"The Windows version on your system is \n"
>"not compatible with the resizing tool.\n"
>"Shrinking your Windows partition is not possible.\n"
>"\n"
>"Choose a different disk or abort the installation and\n"
>"shrink your Windows partition by other means.\n"
>msgstr ""
>
>#. The Windows version used could not be determined. Tell the user
>#. he can go back in the installation or abort it.
>#: storage/src/inst_target_part.ycp:282
>#, ycp-format
>msgid ""
>"The Windows version of your system could not be determined.\n"
>"\n"
>"It is therefore not possible to shrink your Windows partition.\n"
>"\n"
>"Choose a different disk or abort the installation and\n"
>"shrink your Windows partition by other means.\n"
>msgstr ""
>
>#. OK --> No NT or 2000
>#. Tell the user about the risks of resizing his windows.
>#. Ask him if he really wants to do it
>#: storage/src/inst_target_part.ycp:300
>#, ycp-format
>msgid ""
>"You selected to shrink your Windows partition.\n"
>"In the next dialog, specify the amount of\n"
>"Windows space that should be freed for %1.\n"
>"\n"
>"A data backup is strongly recommended\n"
>"because data must be reorganized. \n"
>"Under rare circumstances, this could fail.\n"
>"\n"
>"Only continue if you have successfully run\n"
>"the Windows system applications scandisk and defrag.\n"
>"\n"
>"Really shrink your Windows partition?\n"
>msgstr ""
>
>#. button text
>#: storage/src/inst_target_part.ycp:316
>msgid "&Shrink Windows"
>msgstr ""
>
>#. Tell the user about the consequences of deleting his windows.
>#. Ask him if he really wants to do it
>#: storage/src/inst_target_part.ycp:327
>msgid ""
>"You selected to delete your Windows partition completely.\n"
>"\n"
>"All data on this partition will be lost in the process.\n"
>"\n"
>"Really delete your Windows partition?\n"
>msgstr ""
>
>#. button text
>#: storage/src/inst_target_part.ycp:335
>msgid "&Delete Windows"
>msgstr ""
>
>#: storage/src/inst_target_part.ycp:403
>msgid ""
>"Too few partitions are marked for removal\n"
>"or the disk is too small. \n"
>"To install Linux, select more partitions to \n"
>"remove or select a larger disk."
>msgstr ""
>
>#. label text
>#: storage/src/inst_target_selection.ycp:118
>msgid "&Custom Partitioning (for experts)"
>msgstr ""
>
>#. This dialog selects the target disk for the installation.
>#. Below this label, all targets are listed that can be used as 
>#. installation target
>#. heading text
>#: storage/src/inst_target_selection.ycp:126
>msgid "Hard Disk"
>msgstr ""
>
>#. normally the target is located on hard disks. Here no hard disks 
>#. can be found. YaST2 cannot install. Update CD might have newer drivers.
>#: storage/src/inst_target_selection.ycp:140
>msgid "No disks found. Try using the update CD, if available, for installation."
>msgstr ""
>
>#. There are several hard disks found. Linux is completely installed on
>#. one hard disk - this selection is done here
>#. "Preparing Hard Disk - Step 1" is the description of the dialog what to 
>#. do while the following locale is the help description
>#. help part 1 of 3
>#: storage/src/inst_target_selection.ycp:149
>msgid ""
>"\n"
>"All hard disks automatically detected on your system\n"
>"are shown here. Select the hard disk on which to install &product;.\n"
>"\n"
>msgstr ""
>
>#. help part 2 of 3
>#: storage/src/inst_target_selection.ycp:155
>msgid ""
>"\n"
>"You may select later which part of the disk is used for &product;.\n"
>"\n"
>msgstr ""
>
>#. help part 3 of 3
>#: storage/src/inst_target_selection.ycp:160
>msgid ""
>"\n"
>"\n"
>"The Custom Partitioning option for experts allows full\n"
>"control over partitioning the hard disks and assigning\n"
>"partitions to mount points when installing &product;.\n"
>"\n"
>msgstr ""
>
>#. first step of hd prepare, select a single disk or "expert" partitioning
>#: storage/src/inst_target_selection.ycp:170
>msgid "Preparing Hard Disk: Step 1"
>msgstr ""
>
>#. there is a selection from which one option must be 
>#. chosen - at the moment no option is chosen
>#: storage/src/inst_target_selection.ycp:235
>msgid "Select one of the options to continue."
>msgstr ""
>
>#. button text
>#: storage/src/modules/FileSystems.ycp:211
>msgid "Mount &read-only"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:214
>msgid ""
>"Mount Read-Only:\n"
>"No writable access to the file system is possible. Default is false.\n"
>msgstr ""
>
>#. button text
>#: storage/src/modules/FileSystems.ycp:223
>msgid "No &access time"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:226
>msgid ""
>"No access time:\n"
>"Access times are not updated when a file is read. Default is false."
>msgstr ""
>
>#. button text
>#: storage/src/modules/FileSystems.ycp:234
>msgid "Mountable by &user"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:237
>msgid ""
>"Mountable by User:\n"
>"The file system may be mounted by an ordinary user. Default is false.\n"
>msgstr ""
>
>#. button text
>#: storage/src/modules/FileSystems.ycp:246
>msgid "Do Not Mount at System &Start-up"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:249
>msgid ""
>"Not Mounted at System Start-up:\n"
>"The file system is not automatically mounted when the system starts.\n"
>"An entry in /etc/fstab is created and the file system is mounted\n"
>"with the appropriate options when the command <tt>mount &lt;mount point&gt;</tt>\n"
>"(&lt;mount point&gt; is the directory to which the file system is mounted)\n"
>"is given. Default is false.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:270
>msgid "Data &Journaling Mode"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:277
>msgid ""
>"Data Journaling Mode:\n"
>"Specifies the journaling mode for file data.\n"
>"<tt>journal</tt> -- All data is committed into the journal prior to being\n"
>"written into the main file system.\n"
>"<tt>ordered</tt> -- All data is forced directly out to the main file system\n"
>"prior to its metadata being committed to the journal.\n"
>"<tt>writeback</tt> -- Data ordering is not preserved.\n"
>msgstr ""
>
>#. button text
>#: storage/src/modules/FileSystems.ycp:297
>msgid "&Access Control Lists (ACL)"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:300
>msgid ""
>"Access Control Lists (ACL):\n"
>"Enable access control lists on the file system.\n"
>msgstr ""
>
>#. button text
>#: storage/src/modules/FileSystems.ycp:310
>msgid "&Extended User Attributes"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:313
>msgid ""
>"Extended User Attributes:\n"
>"Allow extended user attributes on the file system.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:328
>msgid "Arbitrary option &value"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:331
>msgid ""
>"Arbitrary Option Value:\n"
>"In this field, type any legal mount option allowed in the fourth field of /etc/fstab.\n"
>"Multiple options are separated by commas.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:346
>#: storage/src/modules/FileSystems.ycp:491
>msgid "Char&set for file names"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:353
>msgid ""
>"Charset for File Names:\n"
>"Set the charset used for display of file names in Windows partitions.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:361
>msgid "Code&page for short FAT names"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:366
>msgid ""
>"Codepage for Short FAT Names:\n"
>"This codepage is used for converting to shortname characters on FAT file systems.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:378
>msgid "Number of &FATs"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:382
>msgid ""
>"Number of FATs:\n"
>"Specify the number of file allocation tables in the file system. The default is 2."
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:387
>msgid "FAT &size"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:394
>msgid ""
>"FAT size:\n"
>"Specifies the type of file allocation tables used (12, 16, or 32-bit). If auto is specified, YaST2 will automatically select the value most suitable for the file system size.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:400
>msgid "Root &dir entries"
>msgstr ""
>
>#. popup text
>#: storage/src/modules/FileSystems.ycp:406
>msgid "The minimum size for \"Root dir entries\" is 112. Please try again."
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:408
>msgid ""
>"Root dir entries:\n"
>"Select the number of entries available in the root directory."
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:417
>msgid "Hash &function"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:422
>msgid ""
>"Hash function:\n"
>"This specifies the name of the hash function to use to sort the file names in directories."
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:427
>msgid "FS &revision"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:432
>msgid ""
>"FS revision:\n"
>"This option defines the reiserfs format revision to use. '3.5' is for backwards compatibility with kernels of the 2.2.x series. '3.6' is more recent, but can only be used with kernel versions greater than or equal to 2.4.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:442
>#: storage/src/modules/FileSystems.ycp:545
>msgid "Block &size in bytes"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:446
>msgid ""
>"Block size:\n"
>"Specify the size of blocks in bytes. Valid block size values are 512, 1024, 2048, and 4096 bytes per block. If auto is selected, the standard block size of 4096 is used.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:452
>#: storage/src/modules/FileSystems.ycp:584
>msgid "&Inode Size"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:456
>#: storage/src/modules/FileSystems.ycp:588
>msgid ""
>"Inode Size:\n"
>"This option specifies the inode size of the file system.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:461
>msgid "&Percentage of inode space"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:468
>msgid ""
>"Percentage of inode space:\n"
>"The option \"Percentage of inode space\" specifies the maximum percentage of space in the file system that can be allocated to inodes.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:474
>msgid "Inode &aligned"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:479
>msgid ""
>"Inode Aligned:\n"
>"The option \"Inode Aligned\" is used to specify whether inode allocation is or\n"
>"is not aligned. The default is that inodes are aligned. Aligned inode access\n"
>"is normally more efficient than unaligned access.\n"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:498
>msgid ""
>"Charset for File Names:\n"
>"Set the charset used to display file names on the partition.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:505
>msgid "&Log size in megabytes"
>msgstr ""
>
>#. popup text
>#: storage/src/modules/FileSystems.ycp:512
>msgid ""
>"The \"Log size\" value is incorrect.\n"
>"Please enter a value greater than zero."
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:515
>#, no-c-format
>msgid ""
>"Log size\n"
>"Set the log size (in megabytes). If auto, the default is 40% of the aggregate size."
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:520
>msgid "Invoke Bad Blocks List &Utility"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:529
>msgid "Stride &length in blocks"
>msgstr ""
>
>#. popup text
>#: storage/src/modules/FileSystems.ycp:535
>msgid ""
>"The \"Stride length in blocks\" value is not possible.\n"
>"Please select a value greater than 1."
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:537
>msgid ""
>"Stride Length in Blocks:\n"
>"Set RAID-related options for the file system. Currently, the only supported\n"
>"argument is 'stride', which takes the number of blocks in a\n"
>"RAID stripe as its argument.\n"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:549
>msgid ""
>"Block size:\n"
>"Specify the size of blocks in bytes. Valid block size values are 1024, 2048, and 4096 bytes per block. If auto is selected, the block size is determined by the file system size and the expected use of the file system.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:554
>msgid "Bytes per &inode"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:558
>msgid ""
>"Bytes per inode:\n"
>"Specify the bytes to inode ratio. YaST2 creates an inode for every &lt;bytes-per-inode&gt; bytes of space on the disk. The larger the bytes-per-inode ratio, the fewer inodes will be created.\n"
>"Generally, this value should not be smaller than the block size of the file system, since too many inodes will be created in this case. It is not possible to expand the\n"
>"number of inodes on a file system after its creation, so be sure to enter a reasonable value for this parameter.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:566
>msgid "Percentage of blocks &reserved for root"
>msgstr ""
>
>#. popup text
>#: storage/src/modules/FileSystems.ycp:574
>msgid ""
>"The \"Percentage of blocks reserved for root\" value is incorrect.\n"
>"Please use a value between 0 and 99."
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:577
>#, no-c-format
>msgid "Percentage of blocks reserved for root: Specify the percentage of blocks reserved for the super user. This value defaults to 5%."
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:593
>msgid "&Directory Index Feature"
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:599
>msgid ""
>"Directory Index:\n"
>"Enables use of hashed b-trees to speed up lookups in large directories.\n"
>msgstr ""
>
>#. label text
>#: storage/src/modules/FileSystems.ycp:724
>msgid "Swap &Priority"
>msgstr ""
>
>#. popup text
>#: storage/src/modules/FileSystems.ycp:730
>msgid "Value must be between 0 and 32767. Try again."
>msgstr ""
>
>#. help text, richtext format
>#: storage/src/modules/FileSystems.ycp:735
>msgid ""
>"Swap Priority:\n"
>"Enter the swap priority. Higher numbers mean higher priority.\n"
>msgstr ""
>
>#. popup text %1 is replaced by disk name e.g. /dev/hda
>#: storage/src/modules/Partitions.ycp:719
>#, ycp-format
>msgid ""
>"\n"
>"The partitioning on your disk %1 is either not readable by\n"
>"the partitioning tool parted used to change the\n"
>"partition table or is not supported by this tool.\n"
>"\n"
>"You may use the partitions on disk %1 as they are or\n"
>"format them and assign mount points to them, but you\n"
>"cannot add, edit, resize, or remove partitions from that\n"
>"disk here.\n"
>msgstr ""
>
>#. popup text 
>#: storage/src/modules/Partitions.ycp:731
>msgid ""
>"\n"
>"\n"
>"You may initialize the disk partition table to a sane state in the Expert\n"
>"Partitioner by selecting \"Expert\"->\"Delete Partition Table \n"
>"and Disk Label\", but this will destroy all data on all partitions of this \n"
>"disk.\n"
>msgstr ""
>
>#: storage/src/modules/Partitions.ycp:741
>msgid ""
>"\n"
>"\n"
>"Safely ignore this message if you do not intend to use \n"
>"this disk during installation.\n"
>msgstr ""
>
>#. internal error popup
>#: storage/src/modules/Storage.ycp:504
>msgid "Too many loop devices (cryptofs ...)"
>msgstr ""
>
>#: storage/src/modules/Storage.ycp:599
>msgid "Resize Not Possible:"
>msgstr ""
>
>#: storage/src/modules/Storage.ycp:2214
>#, ycp-format
>msgid ""
>"Could not set encryption.\n"
>"System error code is %1.\n"
>"\n"
>"The crypt password provided could be incorrect.\n"
>msgstr ""
>
>#. button text
>#: storage/src/modules/StorageControllers.ycp:102
>msgid "&Load Module"
>msgstr ""
>
>#: storage/src/modules/StorageControllers.ycp:105
>#, ycp-format
>msgid ""
>"Here, enter the parameters with which to load\n"
>"the dasd module, such as dasd=FD00-FD0F,FD40.\n"
>"Press \"%1\" to load the \n"
>"module.\n"
>"If the table shows the correct DASDs available,\n"
>"press \"%2\".\n"
>msgstr ""
>
>#. heading text
>#: storage/src/modules/StorageControllers.ycp:121
>msgid "DASD Module Parameter Setting"
>msgstr ""
>
>#. label text
>#: storage/src/modules/StorageControllers.ycp:127
>msgid "&DASD Parameter"
>msgstr ""
>
>#. heading text
>#: storage/src/modules/StorageControllers.ycp:136
>msgid "DASD Name"
>msgstr ""
>
>#. heading text
>#: storage/src/modules/StorageControllers.ycp:138
>msgid "DASD Address"
>msgstr ""
>
>#. heading text
>#: storage/src/modules/StorageControllers.ycp:140
>msgid "Status"
>msgstr ""
>
>#. popup text
>#: storage/src/modules/StorageControllers.ycp:177
>#, ycp-format
>msgid ""
>"Error loading module dasd with \n"
>"parameter: %1"
>msgstr ""
>
>#. popup text
>#: storage/src/modules/StorageControllers.ycp:192
>msgid ""
>"There are no DASD devices active.\n"
>"It is not possible to install without\n"
>"active DASD devices."
>msgstr ""
>
>#. popup text
>#: storage/src/proposal/partitions_proposal.ycp:82
>msgid ""
>"No automatic proposal possible.\n"
>"Specify mount points manually in the 'Partitioner' dialog."
>msgstr ""
>
>#. label text
>#: storage/src/proposal/partitions_proposal.ycp:190
>msgid "&Partitioning"
>msgstr ""
>
>#. progress step title
>#: storage/src/storage_finish.ycp:47
>msgid "Saving file system configuration..."
>msgstr ""

Actions: View

Attachments on bug 228299: 109720