Attachment 113029 Details for Bug 232475

Output from dmesg

dmesg (text/plain), 61.67 KB, created by Klaus Mueller on 2007-01-15 20:31:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Klaus Mueller

Created: 2007-01-15 20:31:54 UTC

Size: 61.67 KB

patch

obsolete

>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001f7df000 (usable)
> BIOS-e820: 000000001f7e0000 - 000000001f7fffc0 (ACPI data)
> BIOS-e820: 000000001f7fffc0 - 000000001f800000 (ACPI NVS)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>503MB LOWMEM available.
>On node 0 totalpages: 128991
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 124895 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>IO/L-APIC allowed because system is MP or new enough
>ACPI: RSDP (v000 INSYDE                                ) @ 0x000e5010
>ACPI: RSDT (v001 INSYDE RSDT_000 0x00000100 ABCD 0x00010200) @ 0x1f7fb7a4
>ACPI: FADT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x1f7ffa80
>ACPI: MADT (v001 STUPID MAPIC_00 0x30307830 ABCD 0x00010200) @ 0x1f7ffb10
>ACPI: HPET (v001 INSYDE HPET_000 0x30303030 0000 0x30303030) @ 0x1f7ffb80
>ACPI: MCFG (v001 INSYDE MCFG_000 0x30303030 0000 0x30303030) @ 0x1f7ffbc0
>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x1f7fb7dc
>ACPI: DSDT (v001 INSYDE SONOMA   0x00000001 INTL 0x02002036) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0x0
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 1f800000:e0700000)
>Detected 1496.262 MHz processor.
>Built 1 zonelists.  Total pages: 128991
>Kernel command line: root=/dev/sda2 vga=0x314 resume=/dev/sda1 splash=silent
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 504744k/515964k available (1697k kernel code, 10648k reserved, 968k data, 196k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2995.83 BogoMIPS (lpj=5991668)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 16k freed
>checking if image is initramfs... it is
>Freeing initrd memory: 2880k freed
>ACPI: Core revision 20060707
>CPU0: Intel(R) Celeron(R) M processor         1.50GHz stepping 08
>Total of 1 processors activated (2995.83 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>migration_cost=0
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xea304, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1300-133f claimed by ICH6 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#02) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: Embedded Controller [EC0] (gpe 23) interrupt mode.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 9 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bus 2, cardbus bridge: 0000:01:02.0
>  IO window: 0000c400-0000c4ff
>  IO window: 0000c800-0000c8ff
>  PREFETCH window: 9c000000-9dffffff
>  MEM window: ce000000-cfffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-dfff
>  MEM window: cc000000-cfffffff
>  PREFETCH window: 9c000000-9fffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 169
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>Machine check exception polling timer started.
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1168591510.656:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>vesafb: framebuffer at 0xa0000000, mapped to 0xe0080000, using 3750k, total 7872k
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 82985 bytes,<6>...found (800x600, 49016 bytes, v3).
>Console: switching to colour frame buffer device 96x33
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Time: tsc clocksource has been installed.
>Freeing unused kernel memory: 196k freed
>input: AT Translated Set 2 keyboard as /class/input/input1
>SCSI subsystem initialized
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x1
>Time: acpi_pm clocksource has been installed.
>ACPI: read EC, IB not empty
>ACPI: read EC, OB not full
>ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707]
>ACPI Exception (dswexec-0458): AE_TIME, While resolving operands for [OpcodeName unavailable] [20060707]
>ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.THRM._TMP] (Node df7c46e4), AE_TIME
>libata version 2.00 loaded.
>ahci 0000:00:1f.2: version 2.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 177
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ahci: probe of 0000:00:1f.2 failed with error -12
>ata_piix 0000:00:1f.2: version 2.00ac7
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>PCI: Enabling device 0000:00:1f.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
>scsi0 : ata_piix
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ata1.00: ATA-6, max UDMA/100, 78140160 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: applying bridge limits
>ata1.00: configured for UDMA/100
>scsi1 : ata_piix
>ata2.00: ATAPI, max UDMA/33
>ata2.00: configured for UDMA/33
>  Vendor: ATA       Model: HTS541040G9AT00   Rev: MB2O
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>  Vendor: PHILIPS   Model: CDRW/DVD SCB5265  Rev: TX08
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>Attempting manual resume
>ReiserFS: sda2: found reiserfs format "3.6" with standard journal
>ReiserFS: sda2: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda2: checking transaction log (sda2)
>ReiserFS: sda2: Using r5 hash to sort names
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 193, io base 0x00001200
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>intel_rng: FWH not detected
>Linux agpgart interface v0.101 (c) Dave Jones
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 177, io base 0x00001220
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 201, io base 0x00001240
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>8139too Fast Ethernet driver 0.9.27
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 193, io mem 0x20000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: EHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd
>usb usb4: SerialNumber: 0000:00:1d.7
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xa0000000
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:01:02.2[C] -> GSI 19 (level, low) -> IRQ 177
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[fedff800-fedfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_codec.c:1706: hda_codec: model 'auto' is selected
>ALSA sound/pci/hda/hda_codec.c:2117: autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2121:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2123:    hp=0x0, dig_out=0x18, din_in=0x0
>ALSA sound/pci/hda/hda_codec.c:2131:    inputs: mic=0x12, fmic=0x0, line=0x0, fline=0x0, cd=0x16, aux=0x0
>ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 20 (level, low) -> IRQ 217
>eth0: RealTek RTL8139 at 0xe06ca000, 00:40:d0:96:0e:0a, IRQ 217
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>Yenta: CardBus bridge found at 0000:01:02.0 [1071:8048]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:01:02.0, mfunc 0x01ac1b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 169
>Socket status: 30000411
>Yenta: Raising subordinate bus# of parent bus (#01) from #02 to #05
>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
>cs: IO port probe 0xc000-0xdfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xcc000000 - 0xcfffffff
>pcmcia: parent PCI bridge Memory window: 0x9c000000 - 0x9fffffff
>pccard: PCMCIA card inserted into slot 0
>cs: memory probe 0xcc000000-0xcfffffff: excluding 0xcc000000-0xcc3fffff 0xce000000-0xcfffffff
>pcmcia: registering new device pcmcia0.0
>cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
>cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>Adding 763048k swap on /dev/sda1.  Priority:-1 extents:1 across:763048k
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>loop: loaded (max 8 devices)
>ReiserFS: dm-2: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-2: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-2: checking transaction log (dm-2)
>ReiserFS: dm-2: Using r5 hash to sort names
>ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-3: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-3: checking transaction log (dm-3)
>ReiserFS: dm-3: Using r5 hash to sort names
>ReiserFS: dm-4: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-4: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-4: checking transaction log (dm-4)
>ReiserFS: dm-4: Using r5 hash to sort names
>ReiserFS: dm-4: Removing [31 1996 0x0 SD]..done
>ReiserFS: dm-4: Removing [31 1994 0x0 SD]..done
>ReiserFS: dm-4: Removing [106 1447 0x0 SD]..done
>ReiserFS: dm-4: There were 3 uncompleted unlinks/truncates. Completed
>AppArmor: AppArmor initialized
>audit(1168591590.588:2): AppArmor initialized
>
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>ReiserFS: loop0: found reiserfs format "3.6" with standard journal
>ReiserFS: loop0: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: loop0: journal params: device loop0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: loop0: checking transaction log (loop0)
>ReiserFS: loop0: replayed 2348 transactions in 3 seconds
>ReiserFS: loop0: Using r5 hash to sort names
>ReiserFS: loop0: found reiserfs format "3.6" with standard journal
>ReiserFS: loop0: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: loop0: journal params: device loop0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: loop0: checking transaction log (loop0)
>ReiserFS: loop0: Using r5 hash to sort names
>ReiserFS: loop1: found reiserfs format "3.6" with standard journal
>ReiserFS: loop1: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: loop1: journal params: device loop1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: loop1: checking transaction log (loop1)
>ReiserFS: loop1: replayed 634 transactions in 2 seconds
>ReiserFS: loop1: Using r5 hash to sort names
>ReiserFS: loop1: found reiserfs format "3.6" with standard journal
>ReiserFS: loop1: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: loop1: journal params: device loop1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: loop1: checking transaction log (loop1)
>ReiserFS: loop1: Using r5 hash to sort names
>ReiserFS: loop2: found reiserfs format "3.6" with standard journal
>ReiserFS: loop2: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: loop2: journal params: device loop2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: loop2: checking transaction log (loop2)
>ReiserFS: loop2: replayed 676 transactions in 1 seconds
>ReiserFS: loop2: Using r5 hash to sort names
>ReiserFS: loop2: found reiserfs format "3.6" with standard journal
>ReiserFS: loop2: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: loop2: journal params: device loop2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: loop2: checking transaction log (loop2)
>ReiserFS: loop2: Using r5 hash to sort names
>ReiserFS: loop2: Removing [9 239 0x0 SD]..done
>ReiserFS: loop2: Removing [9 238 0x0 SD]..done
>ReiserFS: loop2: Removing [9 237 0x0 SD]..done
>ReiserFS: loop2: Removing [9 236 0x0 SD]..done
>ReiserFS: loop2: Removing [9 234 0x0 SD]..done
>ReiserFS: loop2: Removing [9 233 0x0 SD]..done
>ReiserFS: loop2: Removing [9 232 0x0 SD]..done
>ReiserFS: loop2: Removing [10 229 0x0 SD]..done
>ReiserFS: loop2: Removing [10 227 0x0 SD]..done
>ReiserFS: loop2: Removing [9 226 0x0 SD]..done
>ReiserFS: loop2: Removing [10 225 0x0 SD]..done
>ReiserFS: loop2: Removing [10 223 0x0 SD]..done
>ReiserFS: loop2: Removing [10 222 0x0 SD]..done
>ReiserFS: loop2: Removing [10 221 0x0 SD]..done
>ReiserFS: loop2: Removing [10 218 0x0 SD]..done
>ReiserFS: loop2: Removing [10 217 0x0 SD]..done
>ReiserFS: loop2: Removing [10 216 0x0 SD]..done
>ReiserFS: loop2: Removing [9 213 0x0 SD]..done
>ReiserFS: loop2: Removing [15 195 0x0 SD]..done
>ReiserFS: loop2: Removing [9 194 0x0 SD]..done
>ReiserFS: loop2: Removing [10 189 0x0 SD]..done
>ReiserFS: loop2: Removing [9 164 0x0 SD]..done
>ReiserFS: loop2: There were 22 uncompleted unlinks/truncates. Completed
>ACPI: AC Adapter [AC] (off-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Lid Switch [LID]
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>powernow: This module only works with AMD K7 CPUs
>eth0: link down
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>IPv6 over IPv4 tunneling driver
>pccard: card ejected from slot 0
>Freezing cpus ...
>Stopping tasks: ==================================================================================|
>Shrinking memory...  -\|/-done (63723 pages freed)
>ACPI: PCI interrupt for device 0000:01:02.0 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>
>swsusp: Need to copy 52262 pages
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>swsusp: Restoring Highmem
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000)
>PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb4: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20020100, writing 20050100)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:01:02.0 at offset f (was 3c001ff, writing 5c001ff)
>PM: Writing back config space on device 0000:01:02.0 at offset 3 (was 828008, writing 82a820)
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 169
>pccard: PCMCIA card inserted into slot 0
>eth0: link down
>pnp: Device 00:07 does not support activation.
>pnp: Device 00:08 does not support activation.
>ata1: EH complete
>ata2: EH complete
>Restarting tasks... done
>Thawing cpus ...
>pcmcia: registering new device pcmcia0.0
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Lid Switch [LID]
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[fedff800-fedfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>usb 4-3: new high speed USB device using ehci_hcd and address 2
>usb 4-3: new device found, idVendor=04e8, idProduct=0110
>usb 4-3: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 4-3: Product: USB DRIVE       
>usb 4-3: Manufacturer:         
>usb 4-3: SerialNumber: ABCD615519000996
>usb 4-3: configuration #1 chosen from 1 choice
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>  Vendor:           Model: USB DRIVE         Rev: 1.13
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sdb: 1006592 512-byte hdwr sectors (515 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>sdb: assuming drive cache: write through
>SCSI device sdb: 1006592 512-byte hdwr sectors (515 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>sdb: assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: Attached scsi removable disk sdb
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>usb-storage: device scan complete
>pccard: card ejected from slot 0
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>usb 1-1: new device found, idVendor=046d, idProduct=c03e
>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1: Product: USB-PS/2 Optical Mouse
>usb 1-1: Manufacturer: Logitech
>usb 1-1: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
>usb 1-2: new low speed USB device using uhci_hcd and address 3
>usb 1-2: new device found, idVendor=046a, idProduct=0001
>usb 1-2: new device strings: Mfr=1, Product=0, SerialNumber=0
>usb 1-2: Manufacturer: Cherry GmbH
>usb 1-2: configuration #1 chosen from 1 choice
>input: Cherry GmbH as /class/input/input4
>input: USB HID v1.11 Keyboard [Cherry GmbH] on usb-0000:00:1d.0-2
>Freezing cpus ...
>Stopping tasks: ======================================================================================|
>Shrinking memory...  -\|/done (31838 pages freed)
>ACPI: PCI interrupt for device 0000:01:02.0 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>
>swsusp: Need to copy 54336 pages
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>swsusp: Restoring Highmem
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000)
>PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb4: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20020100, writing 20050100)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:01:02.0 at offset f (was 3c001ff, writing 5c001ff)
>PM: Writing back config space on device 0000:01:02.0 at offset 3 (was 828008, writing 82a820)
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 169
>eth0: link down
>pnp: Device 00:07 does not support activation.
>pnp: Device 00:08 does not support activation.
>Restarting tasks...<6>usb 1-1: USB disconnect, address 2
> done
>Thawing cpus ...
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=7, driver=00 
>sdb : sense not available. 
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>usb 1-2: USB disconnect, address 3
>ata1.00: configured for UDMA/100
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>usb 4-3: USB disconnect, address 2
>ata2.00: configured for UDMA/33
>usb 1-1: new low speed USB device using uhci_hcd and address 4
>usb 1-1: new device found, idVendor=046d, idProduct=c03e
>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1: Product: USB-PS/2 Optical Mouse
>usb 1-1: Manufacturer: Logitech
>usb 1-1: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input5
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
>usb 1-2: new low speed USB device using uhci_hcd and address 5
>usb 1-2: new device found, idVendor=046a, idProduct=0001
>usb 1-2: new device strings: Mfr=1, Product=0, SerialNumber=0
>usb 1-2: Manufacturer: Cherry GmbH
>usb 1-2: configuration #1 chosen from 1 choice
>input: Cherry GmbH as /class/input/input6
>input: USB HID v1.11 Keyboard [Cherry GmbH] on usb-0000:00:1d.0-2
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Lid Switch [LID]
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[fedff800-fedfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>usb 4-3: new high speed USB device using ehci_hcd and address 7
>usb 4-3: new device found, idVendor=04e8, idProduct=0110
>usb 4-3: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 4-3: Product: USB DRIVE       
>usb 4-3: Manufacturer:         
>usb 4-3: SerialNumber: ABCD615519000996
>usb 4-3: configuration #1 chosen from 1 choice
>scsi3 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 7
>usb-storage: waiting for device to settle before scanning
>  Vendor:           Model: USB DRIVE         Rev: 1.13
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sdb: 1006592 512-byte hdwr sectors (515 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>sdb: assuming drive cache: write through
>SCSI device sdb: 1006592 512-byte hdwr sectors (515 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>sdb: assuming drive cache: write through
> sdb: sdb1
>sd 3:0:0:0: Attached scsi removable disk sdb
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>usb-storage: device scan complete
>Freezing cpus ...
>Stopping tasks: ========================================================================================|
>Shrinking memory...  -\|done (18424 pages freed)
>ACPI: PCI interrupt for device 0000:01:02.0 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>
>swsusp: Need to copy 55757 pages
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>swsusp: Restoring Highmem
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000)
>PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb4: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20020100, writing 20050100)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:01:02.0 at offset f (was 3c001ff, writing 5c001ff)
>PM: Writing back config space on device 0000:01:02.0 at offset 3 (was 828008, writing 82a820)
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 169
>eth0: link down
>pnp: Device 00:07 does not support activation.
>pnp: Device 00:08 does not support activation.
>Restarting tasks...<6>usb 1-1: USB disconnect, address 4
> done
>Thawing cpus ...
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=7, driver=00 
>sdb : sense not available. 
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=7, driver=00 
>sdb : sense not available. 
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=7, driver=00 
>sdb : sense not available. 
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=7, driver=00 
>sdb : sense not available. 
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>usb 1-2: USB disconnect, address 5
>ata1.00: configured for UDMA/100
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>usb 4-3: USB disconnect, address 7
>ata2.00: configured for UDMA/33
>usb 1-1: new low speed USB device using uhci_hcd and address 6
>usb 1-1: new device found, idVendor=046d, idProduct=c03e
>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1: Product: USB-PS/2 Optical Mouse
>usb 1-1: Manufacturer: Logitech
>usb 1-1: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input7
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
>usb 1-2: new low speed USB device using uhci_hcd and address 7
>usb 1-2: new device found, idVendor=046a, idProduct=0001
>usb 1-2: new device strings: Mfr=1, Product=0, SerialNumber=0
>usb 1-2: Manufacturer: Cherry GmbH
>usb 1-2: configuration #1 chosen from 1 choice
>input: Cherry GmbH as /class/input/input8
>input: USB HID v1.11 Keyboard [Cherry GmbH] on usb-0000:00:1d.0-2
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Lid Switch [LID]
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[fedff800-fedfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>usb 4-3: new high speed USB device using ehci_hcd and address 10
>usb 4-3: new device found, idVendor=04e8, idProduct=0110
>usb 4-3: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 4-3: Product: USB DRIVE       
>usb 4-3: Manufacturer:         
>usb 4-3: SerialNumber: ABCD615519000996
>usb 4-3: configuration #1 chosen from 1 choice
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 10
>usb-storage: waiting for device to settle before scanning
>  Vendor:           Model: USB DRIVE         Rev: 1.13
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sdb: 1006592 512-byte hdwr sectors (515 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>sdb: assuming drive cache: write through
>SCSI device sdb: 1006592 512-byte hdwr sectors (515 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>sdb: assuming drive cache: write through
> sdb: sdb1
>sd 4:0:0:0: Attached scsi removable disk sdb
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>usb-storage: device scan complete
>eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>NET: Registered protocol family 17
>eth0: no IPv6 routers present
>usb 4-3: USB disconnect, address 10
>Freezing cpus ...
>Stopping tasks: ===============================================================================|
>Shrinking memory...  -\|/-\done (67317 pages freed)
>ACPI: PCI interrupt for device 0000:01:02.0 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>
>swsusp: Need to copy 52778 pages
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>swsusp: Restoring Highmem
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000)
>PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb4: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20020100, writing 20050100)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:01:02.0 at offset f (was 3c001ff, writing 5c001ff)
>PM: Writing back config space on device 0000:01:02.0 at offset 3 (was 828008, writing 82a820)
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 169
>eth0: link down
>pnp: Device 00:07 does not support activation.
>pnp: Device 00:08 does not support activation.
>Restarting tasks...<6>usb 1-1: USB disconnect, address 6
>usb 1-2: USB disconnect, address 7
> done
>Thawing cpus ...
>ata1.00: configured for UDMA/100
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>ata2.00: configured for UDMA/33
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Lid Switch [LID]
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[fedff800-fedfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>usb 4-3: new high speed USB device using ehci_hcd and address 11
>usb 4-3: new device found, idVendor=04e8, idProduct=0110
>usb 4-3: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 4-3: Product: USB DRIVE       
>usb 4-3: Manufacturer:         
>usb 4-3: SerialNumber: ABCD615519000996
>usb 4-3: configuration #1 chosen from 1 choice
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 11
>usb-storage: waiting for device to settle before scanning
>  Vendor:           Model: USB DRIVE         Rev: 1.13
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sdb: 1006592 512-byte hdwr sectors (515 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>sdb: assuming drive cache: write through
>SCSI device sdb: 1006592 512-byte hdwr sectors (515 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>sdb: assuming drive cache: write through
> sdb: sdb1
>sd 5:0:0:0: Attached scsi removable disk sdb
>sd 5:0:0:0: Attached scsi generic sg2 type 0
>usb-storage: device scan complete
>usb 4-3: USB disconnect, address 11
>Freezing cpus ...
>Stopping tasks: ==============================================================================|
>Shrinking memory...  -\|/done (25557 pages freed)
>ACPI: PCI interrupt for device 0000:01:02.0 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>
>swsusp: Need to copy 39837 pages
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>swsusp: Restoring Highmem
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000)
>PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb4: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20020100, writing 20050100)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:01:02.0 at offset f (was 3c001ff, writing 5c001ff)
>PM: Writing back config space on device 0000:01:02.0 at offset 3 (was 828008, writing 82a820)
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 169
>eth0: link down
>pnp: Device 00:07 does not support activation.
>pnp: Device 00:08 does not support activation.
>Restarting tasks... done
>Thawing cpus ...
>ata1.00: configured for UDMA/100
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>ata2.00: configured for UDMA/33
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Lid Switch [LID]
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[fedff800-fedfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>pccard: PCMCIA card inserted into slot 0
>pcmcia: registering new device pcmcia0.0
>pccard: card ejected from slot 0
>usb 1-1: new low speed USB device using uhci_hcd and address 8
>usb 1-1: new device found, idVendor=046a, idProduct=0001
>usb 1-1: new device strings: Mfr=1, Product=0, SerialNumber=0
>usb 1-1: Manufacturer: Cherry GmbH
>usb 1-1: configuration #1 chosen from 1 choice
>input: Cherry GmbH as /class/input/input9
>input: USB HID v1.11 Keyboard [Cherry GmbH] on usb-0000:00:1d.0-1
>usb 1-2: new low speed USB device using uhci_hcd and address 9
>usb 1-2: new device found, idVendor=046d, idProduct=c03e
>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2: Product: USB-PS/2 Optical Mouse
>usb 1-2: Manufacturer: Logitech
>usb 1-2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input10
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2
>eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>Freezing cpus ...
>Stopping tasks: =======================================================================================|
>Shrinking memory...  -\|/-done (67644 pages freed)
>ACPI: PCI interrupt for device 0000:01:02.0 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>
>swsusp: Need to copy 53127 pages
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>swsusp: Restoring Highmem
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb4: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20020100, writing 20050100)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:01:02.0 at offset f (was 3c001ff, writing 5c001ff)
>PM: Writing back config space on device 0000:01:02.0 at offset 3 (was 828008, writing 82a820)
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 169
>eth0: link down
>pnp: Device 00:07 does not support activation.
>pnp: Device 00:08 does not support activation.
>Restarting tasks...<6>usb 1-1: USB disconnect, address 8
>usb 1-2: USB disconnect, address 9
> done
>Thawing cpus ...
>ata1.00: configured for UDMA/100
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>ata2.00: configured for UDMA/33
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Lid Switch [LID]
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[fedff800-fedfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>pccard: PCMCIA card inserted into slot 0
>pcmcia: registering new device pcmcia0.0
>pccard: card ejected from slot 0
>Freezing cpus ...
>Stopping tasks: ===================================================================================|
>Shrinking memory...  -\|/-\|done (65768 pages freed)
>ACPI: PCI interrupt for device 0000:01:02.0 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>
>swsusp: Need to copy 55432 pages
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>swsusp: Restoring Highmem
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb4: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20020100, writing 20050100)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:01:02.0 at offset f (was 3c001ff, writing 5c001ff)
>PM: Writing back config space on device 0000:01:02.0 at offset 3 (was 828008, writing 82a820)
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 169
>eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>pnp: Device 00:07 does not support activation.
>pnp: Device 00:08 does not support activation.
>Restarting tasks... done
>Thawing cpus ...
>ata1.00: configured for UDMA/100
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>ata2.00: configured for UDMA/33
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Lid Switch [LID]
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[fedff800-fedfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>eth0: no IPv6 routers present
>usbcore: deregistering driver usb-storage
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>kobject_add failed for ide with -EEXIST, don't try to register things with the same name in the same directory.
> [<c01c026f>] kobject_add+0x161/0x18a
> [<c01c037e>] kobject_register+0x19/0x30
> [<c0224f19>] bus_add_driver+0x51/0x107
> [<e044c85c>] init_module+0x716/0x72f [ide_core]
> [<c0137119>] __link_module+0x0/0x1f
> [<c011b951>] __cond_resched+0x16/0x34
> [<c02a44e0>] cond_resched+0x2a/0x31
> [<c02a4515>] wait_for_completion+0x18/0xa4
> [<c0140466>] do_stop+0x0/0x117
> [<c0137119>] __link_module+0x0/0x1f
> [<c013987f>] sys_init_module+0x17fe/0x1981
> [<c020d3bd>] tty_write+0x1cc/0x1dd
> [<c0103d5d>] sysenter_past_esp+0x56/0x79
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>kobject_add failed for ide with -EEXIST, don't try to register things with the same name in the same directory.
> [<c01c026f>] kobject_add+0x161/0x18a
> [<c01c037e>] kobject_register+0x19/0x30
> [<c0224f19>] bus_add_driver+0x51/0x107
> [<e044c85c>] init_module+0x716/0x72f [ide_core]
> [<c0137119>] __link_module+0x0/0x1f
> [<c011b951>] __cond_resched+0x16/0x34
> [<c02a44e0>] cond_resched+0x2a/0x31
> [<c02a4515>] wait_for_completion+0x18/0xa4
> [<c0140466>] do_stop+0x0/0x117
> [<c0137119>] __link_module+0x0/0x1f
> [<c013987f>] sys_init_module+0x17fe/0x1981
> [<c020d3bd>] tty_write+0x1cc/0x1dd
> [<c0103d5d>] sysenter_past_esp+0x56/0x79
>usb 4-3: new high speed USB device using ehci_hcd and address 14
>usb 4-3: new device found, idVendor=04e8, idProduct=0110
>usb 4-3: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 4-3: Product: USB DRIVE       
>usb 4-3: Manufacturer:         
>usb 4-3: SerialNumber: ABCD615519000996
>usb 4-3: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 14
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>  Vendor:           Model: USB DRIVE         Rev: 1.13
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sdb: 1006592 512-byte hdwr sectors (515 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>sdb: assuming drive cache: write through
>SCSI device sdb: 1006592 512-byte hdwr sectors (515 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>sdb: assuming drive cache: write through
> sdb: sdb1
>sd 6:0:0:0: Attached scsi removable disk sdb
>sd 6:0:0:0: Attached scsi generic sg2 type 0
>usb-storage: device scan complete
>usb 4-3: USB disconnect, address 14
>usbcore: deregistering driver usb-storage
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>kobject_add failed for ide with -EEXIST, don't try to register things with the same name in the same directory.
> [<c01c026f>] kobject_add+0x161/0x18a
> [<c01c037e>] kobject_register+0x19/0x30
> [<c0224f19>] bus_add_driver+0x51/0x107
> [<e044c85c>] init_module+0x716/0x72f [ide_core]
> [<c0137119>] __link_module+0x0/0x1f
> [<c011b951>] __cond_resched+0x16/0x34
> [<c02a44e0>] cond_resched+0x2a/0x31
> [<c02a4515>] wait_for_completion+0x18/0xa4
> [<c0140466>] do_stop+0x0/0x117
> [<c0137119>] __link_module+0x0/0x1f
> [<c013987f>] sys_init_module+0x17fe/0x1981
> [<c020d3bd>] tty_write+0x1cc/0x1dd
> [<c0103d5d>] sysenter_past_esp+0x56/0x79
>usb 4-3: new high speed USB device using ehci_hcd and address 15
>usb 4-3: new device found, idVendor=04e8, idProduct=0110
>usb 4-3: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 4-3: Product: USB DRIVE       
>usb 4-3: Manufacturer:         
>usb 4-3: SerialNumber: ABCD615519000996
>usb 4-3: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi7 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 15
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>  Vendor:           Model: USB DRIVE         Rev: 1.13
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sdb: 1006592 512-byte hdwr sectors (515 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>sdb: assuming drive cache: write through
>SCSI device sdb: 1006592 512-byte hdwr sectors (515 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>sdb: assuming drive cache: write through
> sdb: sdb1
>sd 7:0:0:0: Attached scsi removable disk sdb
>sd 7:0:0:0: Attached scsi generic sg2 type 0
>usb-storage: device scan complete
>usbcore: deregistering driver usb-storage
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>kobject_add failed for ide with -EEXIST, don't try to register things with the same name in the same directory.
> [<c01c026f>] kobject_add+0x161/0x18a
> [<c01c037e>] kobject_register+0x19/0x30
> [<c0224f19>] bus_add_driver+0x51/0x107
> [<e044c85c>] init_module+0x716/0x72f [ide_core]
> [<c0137119>] __link_module+0x0/0x1f
> [<c011b951>] __cond_resched+0x16/0x34
> [<c02a44e0>] cond_resched+0x2a/0x31
> [<c02a4515>] wait_for_completion+0x18/0xa4
> [<c0140466>] do_stop+0x0/0x117
> [<c0137119>] __link_module+0x0/0x1f
> [<c013987f>] sys_init_module+0x17fe/0x1981
> [<c020d3bd>] tty_write+0x1cc/0x1dd
> [<c0103d5d>] sysenter_past_esp+0x56/0x79
>Freezing cpus ...
>Stopping tasks: ==================================================================================================|
>Shrinking memory...  -\|/-\done (58335 pages freed)
> usbdev4.15_ep83: PM: suspend 0->1, parent 4-3:1.0 already 1
> usbdev4.15_ep02: PM: suspend 0->1, parent 4-3:1.0 already 1
> usbdev4.15_ep81: PM: suspend 0->1, parent 4-3:1.0 already 1
>ACPI: PCI interrupt for device 0000:01:02.0 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>
>swsusp: Need to copy 54918 pages
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>swsusp: Restoring Highmem
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb4: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20020100, writing 20050100)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:01:02.0 at offset f (was 3c001ff, writing 5c001ff)
>PM: Writing back config space on device 0000:01:02.0 at offset 3 (was 828008, writing 82a820)
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 169
>eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
>pnp: Device 00:07 does not support activation.
>pnp: Device 00:08 does not support activation.
> usbdev4.15_ep81: PM: resume from 0, parent 4-3:1.0 still 1
> usbdev4.15_ep02: PM: resume from 0, parent 4-3:1.0 still 1
> usbdev4.15_ep83: PM: resume from 0, parent 4-3:1.0 still 1
>Restarting tasks...<6>usb 4-3: USB disconnect, address 15
> done
>Thawing cpus ...
>ata1.00: configured for UDMA/100
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>ata2.00: configured for UDMA/33
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Lid Switch [LID]
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[fedff800-fedfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>BUG: unable to handle kernel paging request at virtual address e05044b0
> printing eip:
>c01c01b9
>*pde = 1f2ac067
>Oops: 0002 [#1]
>SMP 
>last sysfs file: /devices/pci0000:00/0000:00:1e.0/0000:01:05.0/resource
>Modules linked in: ide_core ohci1394 ieee1394 button snd_vxpocket pcmcia snd_vx_lib firmware_class snd_pcm snd_timer snd soundcore snd_page_alloc af_packet nls_iso8859_1 nls_cp437 vfat fat ipv6 battery ac twofish cryptoloop usbhid ohci_hcd apparmor aamatch_pcre loop dm_mod yenta_socket rsrc_nonstatic 8139too mii pcmcia_core i2c_i801 i2c_core intel_agp agpgart ehci_hcd uhci_hcd usbcore reiserfs sr_mod cdrom edd fan sg ata_piix ahci libata thermal processor sd_mod scsi_mod
>CPU:    0
>EIP:    0060:[<c01c01b9>]    Tainted: G     U VLI
>EFLAGS: 00010292   (2.6.18.2-34-default #1) 
>EIP is at kobject_add+0xab/0x18a
>eax: c0351501   ebx: e0770494   ecx: e05044b0   edx: e07704b0
>esi: ffffffea   edi: c03514c0   ebp: d5212de0   esp: df4a1e08
>ds: 007b   es: 007b   ss: 0068
>Process modprobe (pid: 12319, ti=df4a0000 task=d183e8a0 task.ti=df4a0000)
>Stack: 00000000 c02bd5d1 e0770494 e0770498 fffffffe c0351540 e0770494 ffffffea 
>       c03514c0 d5212de0 c01c037e e0770494 e077047c c0224f19 e0770494 c02bd5cf 
>       e0763efd 00000000 00000001 00000000 d5212800 d5212e38 d5212de0 e044c85c 
>Call Trace:
> [<c01c037e>] kobject_register+0x19/0x30
> [<c0224f19>] bus_add_driver+0x51/0x107
> [<e044c85c>] init_module+0x716/0x72f [ide_core]
> [<c0137119>] __link_module+0x0/0x1f
> [<c011b951>] __cond_resched+0x16/0x34
> [<c02a44e0>] cond_resched+0x2a/0x31
> [<c02a4515>] wait_for_completion+0x18/0xa4
> [<c0140466>] do_stop+0x0/0x117
> [<c0137119>] __link_module+0x0/0x1f
> [<c013987f>] sys_init_module+0x17fe/0x1981
> [<c020d3bd>] tty_write+0x1cc/0x1dd
> [<c0103d5d>] sysenter_past_esp+0x56/0x79
>Code: 24 14 00 75 0f 8b 43 28 83 c0 14 e8 31 fe ff ff 89 44 24 14 8b 43 28 8d 53 1c 83 c0 08 8b 48 04 89 43 1c 89 50 04 b0 01 89 4a 04 <89> 11 8b 53 28 86 42 10 8b 44 24 14 89 43 24 c7 44 24 10 00 00 
>EIP: [<c01c01b9>] kobject_add+0xab/0x18a SS:ESP 0068:df4a1e08
>

Actions: View

Attachments on bug 232475: 113029 | 113056 | 113082 | 113119