Attachment 131226 Details for Bug 251081

Complete output of dmesg on the clean VM-installation (see comment #6 for details)

ppp_generic (text/plain), 15.08 KB, created by Homepage-AG des StGH on 2007-04-15 18:51:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Homepage-AG des StGH

Created: 2007-04-15 18:51:53 UTC

Size: 15.08 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/sda2 vga=0x332    resume=/dev/sda1 splash=silent)
>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000017ef0000 (usable)
> BIOS-e820: 0000000017ef0000 - 0000000017eff000 (ACPI data)
> BIOS-e820: 0000000017eff000 - 0000000017f00000 (ACPI NVS)
> BIOS-e820: 0000000017f00000 - 0000000018000000 (usable)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
>DMI present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f6c70
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x0000000017efab74
>ACPI: FADT (v001 INTEL  440BX    0x06040000 PTL  0x000f4240) @ 0x0000000017efef14
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x0000000017efef88
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x0000000017efefd8
>ACPI: DSDT (v001 PTLTD  Custom   0x06040000 MSFT 0x0100000d) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000018000000
>Bootmem setup node 0 0000000000000000-0000000018000000
>On node 0 totalpages: 95798
>  DMA zone: 2894 pages, LIFO batch:0
>  DMA32 zone: 92904 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:15 APIC version 17
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 18000000:e6c00000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>Built 1 zonelists.  Total pages: 95798
>Kernel command line: root=/dev/sda2 vga=0x332    resume=/dev/sda1 splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 16384 bytes)
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 1800.104 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
>Checking aperture...
>Memory: 378932k/393216k available (1915k kernel code, 13832k reserved, 1278k data, 188k init)
>Calibrating delay using timer specific routine.. 3606.84 BogoMIPS (lpj=7213686)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 28k freed
>checking if image is initramfs... it is
>Freeing initrd memory: 3392k freed
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 3214935
>Detected 3.214 MHz APIC timer.
>Brought up 1 CPUs
>testing NMI watchdog ... OK.
>migration_cost=0
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-103f claimed by PIIX4 ACPI
>PCI quirk: region 1040-104f claimed by PIIX4 SMB
>Boot video device is 0000:00:0f.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-GART: No AMD northbridge found.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
>TCP established hash table entries: 16384 (order: 6, 262144 bytes)
>TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>Simple Boot Flag at 0x36 set to 0x80
>audit: initializing netlink socket (disabled)
>audit(1176667053.548:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>vesafb: framebuffer at 0xf0000000, mapped to 0xffffc20000080000, using 3750k, total 16384k
>vesafb: mode is 800x600x16, linelength=1600, pages=0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 82985 bytes,<6>...found (800x600, 49016 bytes, v3).
>Console: switching to colour frame buffer device 96x33
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>input: AT Translated Set 2 keyboard as /class/input/input1
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 1
>ACPI: (supports S0 S1 S5)
>Freeing unused kernel memory: 188k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x1
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x2
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>PIIX4: IDE controller at PCI slot 0000:00:07.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide1: BM-DMA at 0x1058-0x105f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide1...
>hdc: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>Fusion MPT base driver 3.04.01
>Copyright (c) 1999-2005 LSI Logic Corporation
>Fusion MPT SPI Host driver 3.04.01
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 169
>mptbase: Initiating ioc0 bringup
>ioc0: 53C1030: Capabilities={Initiator}
>scsi0 : ioc0: LSI53C1030, FwRev=00000000h, Ports=1, MaxQ=128, IRQ=169
>  Vendor: VMware,   Model: VMware Virtual S  Rev: 1.0 
>  Type:   Direct-Access                      ANSI SCSI revision: 02
> target0:0:0: Beginning Domain Validation
> target0:0:0: Domain Validation skipping write tests
> target0:0:0: Ending Domain Validation
> target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 127)
>SCSI device sda: 16777216 512-byte hdwr sectors (8590 MB)
>sda: Write Protect is off
>sda: Mode Sense: 5d 00 00 00
>sda: cache data unavailable
>sda: assuming drive cache: write through
>SCSI device sda: 16777216 512-byte hdwr sectors (8590 MB)
>sda: Write Protect is off
>sda: Mode Sense: 5d 00 00 00
>sda: cache data unavailable
>sda: assuming drive cache: write through
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>Probing IDE interface ide0...
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>lp0: using parport0 (polling).
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 64M @ 0xec000000
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
>hdc: ATAPI 1X CD-ROM drive, 32kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 18 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:11.0 to 64
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>e1000: 0000:00:11.0: e1000_probe: (PCI:66MHz:32-bit) 00:0c:29:9f:b2:84
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>Adding 578300k swap on /dev/sda1.  Priority:-1 extents:1 across:578300k
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>loop: loaded (max 8 devices)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Power Button (FF) [PWRF]
>ibm_acpi: ec object not found
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)
>powernow-k8: BIOS error - no PSB or ACPI _PSS objects
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>mtrr: your processor doesn't support write-combining
>st: Version 20050830, fixed bufsize 32768, s/g segs 256
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>eth0: no IPv6 routers present
>ip_tables: (C) 2000-2006 Netfilter Core Team
>NET: Registered protocol family 17
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (1536 buckets, 12288 max) - 288 bytes per conntrack
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>mtrr: your processor doesn't support write-combining
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>lp0: using parport0 (polling).
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:0c:29:9f:b2:84:00:50:56:fa:0d:7a:08:00 SRC=172.16.77.254 DST=172.16.77.128 LEN=328 TOS=0x10 PREC=0x00 TTL=16 ID=0 PROTO=UDP SPT=67 DPT=68 LEN=308 
>mtrr: your processor doesn't support write-combining
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>lp0: using parport0 (polling).
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>mtrr: your processor doesn't support write-combining
>eth0: no IPv6 routers present
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>CSLIP: code copyright 1989 Regents of the University of California
>PPP generic driver version 2.4.2
>NET: Registered protocol family 24
>NET: Unregistered protocol family 24
>PPP generic driver version 2.4.2
>kobject_add failed for ppp with -EEXIST, don't try to register things with the same name in the same directory.
>
>Call Trace:
> [<ffffffff80310436>] kobject_add+0x16e/0x199
> [<ffffffff80310579>] kobject_register+0x20/0x3a
> [<ffffffff803105dc>] kobject_add_dir+0x49/0x55
> [<ffffffff803703c2>] virtual_device_parent+0x5e/0x80
> [<ffffffff8036e1cc>] device_add+0x4f/0x4e7
> [<ffffffff80253deb>] kobject_get+0x12/0x17
> [<ffffffff8036e736>] device_create+0xc0/0xef
> [<ffffffff802ebb7d>] sysfs_create_dir+0x58/0x76
> [<ffffffff80253deb>] kobject_get+0x12/0x17
> [<ffffffff80370ea8>] class_register+0xfe/0x130
> [<ffffffff880cc067>] :ppp_generic:ppp_init+0x67/0x94
> [<ffffffff80299bcc>] sys_init_module+0x172f/0x18e5
> [<ffffffff8025800e>] system_call+0x7e/0x83
>
>Unable to handle kernel NULL pointer dereference at 0000000000000010 RIP: 
> [<ffffffff802eb5f2>] create_dir+0x11/0x1cf
>PGD d904067 PUD a679067 PMD 0 
>Oops: 0000 [1] SMP 
>last sysfs file: /devices/pci0000:00/0000:00:07.1/ide1/1.0/media
>CPU 0 
>Modules linked in: ppp_generic slhc lp parport_pc parport ip6t_REJECT xt_tcpudp xt_pkttype ipt_REJECT ipt_LOG xt_limit xt_state iptable_mangle iptable_nat ip_nat ip6table_mangle ip_conntrack nfnetlink ip6table_filter ip6_tables af_packet iptable_filter ip_tables x_tables joydev st sr_mod ipv6 button battery ac loop dm_mod floppy e1000 shpchp pci_hotplug ide_cd i2c_piix4 cdrom i2c_core intel_agp ext3 mbcache jbd edd fan sg ide_generic mptspi mptscsih mptbase scsi_transport_spi piix thermal processor sd_mod scsi_mod ide_disk ide_core
>Pid: 10348, comm: modprobe Tainted: G     U 2.6.18.2-34-default #1
>RIP: 0010:[<ffffffff802eb5f2>]  [<ffffffff802eb5f2>] create_dir+0x11/0x1cf
>RSP: 0018:ffff81000cea5c68  EFLAGS: 00010286
>RAX: ffff81001520c6c0 RBX: ffff810001de20f0 RCX: ffff81000cea5ca0
>RDX: ffff810001de20f8 RSI: 0000000000000000 RDI: ffff810001de20f0
>RBP: ffff810001de20f0 R08: 00000000ffffffff R09: 0000000006c00000
>R10: 0000000000000000 R11: 0000000000000000 R12: ffff810001de2000
>R13: ffff81000cea5ca0 R14: 0000000000000000 R15: ffff81001520c6c0
>FS:  00002b5d7b8d46f0(0000) GS:ffffffff805b7000(0000) knlGS:00000000f6a39ac0
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 0000000000000010 CR3: 000000000d463000 CR4: 00000000000006e0
>Process modprobe (pid: 10348, threadinfo ffff81000cea4000, task ffff810003e530c0)
>Stack:  ffff810001de20f0 ffff810001de2158 ffff810001de2000 0000000000000000
> 0000000000000000 ffffffff802ebb7d ffff81001520c6c0 0000000000000000
> ffff810001de20f0 ffffffff803103a4 ffff8100153faa00 ffff810001de2000
>Call Trace:
> [<ffffffff802ebb7d>] sysfs_create_dir+0x58/0x76
> [<ffffffff803103a4>] kobject_add+0xdc/0x199
> [<ffffffff8036e225>] device_add+0xa8/0x4e7
> [<ffffffff80253deb>] kobject_get+0x12/0x17
> [<ffffffff8036e736>] device_create+0xc0/0xef
> [<ffffffff802ebb7d>] sysfs_create_dir+0x58/0x76
> [<ffffffff80253deb>] kobject_get+0x12/0x17
> [<ffffffff80370ea8>] class_register+0xfe/0x130
> [<ffffffff880cc067>] :ppp_generic:ppp_init+0x67/0x94
> [<ffffffff80299bcc>] sys_init_module+0x172f/0x18e5
> [<ffffffff8025800e>] system_call+0x7e/0x83
>
>
>Code: 48 8b 7e 10 48 89 d3 48 81 c7 c0 00 00 00 e8 2a 1f f7 ff fc 
>RIP  [<ffffffff802eb5f2>] create_dir+0x11/0x1cf
> RSP <ffff81000cea5c68>
>CR2: 0000000000000010
>

Actions: View

Attachments on bug 251081: 131226