Attachment 178782 Details for Bug 334170

dmesg including boot and s2ram

dmesg.log (text/plain), 46.42 KB, created by Péter Kerékfy on 2007-10-16 13:00:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Péter Kerékfy

Created: 2007-10-16 13:00:59 UTC

Size: 46.42 KB

patch

obsolete

>Linux version 2.6.22.9-0.4-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/10/05 21:32:04 UTC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f7d0000 (usable)
> BIOS-e820: 000000007f7d0000 - 000000007f7e5600 (reserved)
> BIOS-e820: 000000007f7e5600 - 000000007f7f8000 (ACPI NVS)
> BIOS-e820: 000000007f7f8000 - 000000007f800000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>1143MB HIGHMEM available.
>896MB LOWMEM available.
>Entering add_active_range(0, 0, 522192) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   522192
>early_node_map[1] active PFN ranges
>    0:        0 ->   522192
>On node 0 totalpages: 522192
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2287 pages used for memmap
>  HighMem zone: 290529 pages, LIFO batch:31
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F78B0, 0024 (r2 HP    )
>ACPI: XSDT 7F7E57C8, 007C (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: FACP 7F7E5684, 00F4 (r4 HP     30AD            3 HP          1)
>ACPI: DSDT 7F7E5ACC, FE7B (r1 HP       nc6400    10000 MSFT  100000E)
>ACPI: FACS 7F7F7E80, 0040
>ACPI: SLIC 7F7E5844, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: HPET 7F7E59BC, 0038 (r1 HP     30AD            1 HP          1)
>ACPI: APIC 7F7E59F4, 0068 (r1 HP     30AD            1 HP          1)
>ACPI: MCFG 7F7E5A5C, 003C (r1 HP     30AD            1 HP          1)
>ACPI: TCPA 7F7E5A98, 0032 (r2 HP     30AD            1 HP          1)
>ACPI: SSDT 7F7F5947, 0059 (r1 HP       HPQNLP        1 MSFT  100000E)
>ACPI: SSDT 7F7F59A0, 032D (r1 HP       HPQSAT        1 MSFT  100000E)
>ACPI: SSDT 7F7F6522, 025F (r1 HP      Cpu0Tst     3000 INTL 20060317)
>ACPI: SSDT 7F7F6781, 00A6 (r1 HP      Cpu1Tst     3000 INTL 20060317)
>ACPI: SSDT 7F7F6827, 04D7 (r1 HP        CpuPm     3000 INTL 20060317)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:14 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7f800000:7f400000)
>Built 1 zonelists.  Total pages: 518113
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HM100JIS0EDJD0P302098-part2 vga=0x317 resume=/dev/sda1 splash=silent
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1995.094 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2062824k/2088768k available (1824k kernel code, 24616k reserved, 761k data, 228k init, 1171264k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffdf4000 - 0xfffff000   (2092 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc038e000 - 0xc03c7000   ( 228 kB)
>      .data : 0xc02c832b - 0xc0386964   ( 761 kB)
>      .text : 0xc0100000 - 0xc02c832b   (1824 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Calibrating delay using timer specific routine.. 3994.32 BogoMIPS (lpj=7988642)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Unpacking initramfs... done
>Freeing initrd memory: 4034k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 1199 Objects with 98 Devices 378 Methods 42 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0003) - 18 Objects with 4 Devices 5 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0004) - 7 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0005) - 4 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0006) - 14 Objects with 0 Devices 5 Methods 0 Regions
> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>CPU0: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=7980066)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>Total of 2 processors activated (7984.35 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>migration_cost=37
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
>PCI: Using configuration type 1
>Setting up standard PCI resources
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 8 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:......................................................................................................................................................................
>Initialized 40/42 Regions 0/0 Fields 66/66 Buffers 60/69 Packages (1253 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:........
>Executed 8 _INI methods requiring 3 _STA executions (examined 111 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [C002] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1100-113f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C101._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C111._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C117._PRT]
>ACPI: PCI Interrupt Link [C10D] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C10E] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C10F] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C110] (IRQs 10 11) *5
>ACPI: PCI Interrupt Link [C123] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C124] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C125] (IRQs 10 *11)
>ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
>ACPI: Power Resource [C220] (on)
>ACPI: Power Resource [C228] (on)
>ACPI: Power Resource [C32D] (off)
>ACPI: Power Resource [C32E] (off)
>ACPI: Power Resource [C32F] (off)
>ACPI: Power Resource [C330] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>ACPI: RTC can wake from S4
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0x7f7fffff could not be reserved
>pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
>pnp: 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
>pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:0c: ioport range 0x1000-0x107f has been reserved
>pnp: 00:0c: ioport range 0x1100-0x113f has been reserved
>pnp: 00:0c: ioport range 0x1200-0x121f has been reserved
>pnp: 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
>pnp: 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
>pnp: 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved
>pnp: 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved
>pnp: 00:0d: iomem range 0xfeda0000-0xfedbffff could not be reserved
>pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
>Time: tsc clocksource has been installed.
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #1
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: f4100000-f41fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: f4000000-f40fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: 2000-3fff
>  MEM window: f0000000-f3ffffff
>  PREFETCH window: disabled.
>PCI: Bus 3, cardbus bridge: 0000:02:06.0
>  IO window: 00005000-000050ff
>  IO window: 00005400-000054ff
>  PREFETCH window: 80000000-83ffffff
>  MEM window: 84000000-87ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: f4200000-f45fffff
>  PREFETCH window: 80000000-83ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 19
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>audit(1192538818.712:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 6144k, total 7872k
>vesafb: mode is 1024x768x16, linelength=2048, pages=4
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 78436 bytes
>bootsplash: ...found (1024x768, 28133 bytes, v3).
>Console: switching to colour frame buffer device 124x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>PNP: PS/2 Controller [PNP0303:C21D,PNP0f13:C21E] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 228k freed
>ACPI: SSDT 7F7F5D95, 023D (r1 HP      Cpu0Ist     3000 INTL 20060317)
>Parsing all Control Methods:
>Table [SSDT](id 00EF) - 6 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: SSDT 7F7F6057, 04CB (r1 HP      Cpu0Cst     3001 INTL 20060317)
>Parsing all Control Methods:
>Table [SSDT](id 00F0) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7F7F5CCD, 00C8 (r1 HP      Cpu1Ist     3000 INTL 20060317)
>Parsing all Control Methods:
>Table [SSDT](id 00F7) - 4 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: SSDT 7F7F5FD2, 0085 (r1 HP      Cpu1Cst     3000 INTL 20060317)
>Parsing all Control Methods:
>Table [SSDT](id 00F8) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: hpet clocksource has been installed.
>ACPI: Thermal Zone [TZ0] (50 C)
>ACPI: Thermal Zone [TZ1] (47 C)
>ACPI: Thermal Zone [TZ2] (45 C)
>ACPI: Thermal Zone [TZ3] (33 C)
>ACPI: Thermal Zone [TZ4] (60 C)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 21 (level, low) -> IRQ 20
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>input: AT Translated Set 2 keyboard as /class/input/input2
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 cmd 0xf8858100 ctl 0x00000000 bmdma 0x00000000 irq 220
>ata2: SATA max UDMA/133 cmd 0xf8858180 ctl 0x00000000 bmdma 0x00000000 irq 220
>ata3: SATA max UDMA/133 cmd 0xf8858200 ctl 0x00000000 bmdma 0x00000000 irq 220
>ata4: SATA max UDMA/133 cmd 0xf8858280 ctl 0x00000000 bmdma 0x00000000 irq 220
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: SAMSUNG HM100JI, YH100-19, max UDMA7
>ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>ata4: SATA link down (SStatus 0 SControl 0)
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM100JI  YH10 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.1: version 2.11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140a0 irq 14
>ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140a8 irq 15
>ata5.00: ATAPI: MATSHITADVD-RAM UJ-842S, 1.01, max MWDMA2
>ata5.00: configured for MWDMA2
>ata6: port disabled. ignoring.
>scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-842S  1.01 PQ: 0 ANSI: 5
>ACPI: Transitioning device [C331] to D3
>ACPI: Transitioning device [C331] to D3
>ACPI: Fan [C331] (off)
>ACPI: Transitioning device [C332] to D3
>ACPI: Transitioning device [C332] to D3
>ACPI: Fan [C332] (off)
>ACPI: Transitioning device [C333] to D3
>ACPI: Transitioning device [C333] to D3
>ACPI: Fan [C333] (off)
>ACPI: Fan [C334] (on)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 21, io base 0x00004020
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004040
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
> sda1 sda2 sda3 sda4
>usb usb2: SerialNumber: 0000:00:1d.1
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x00004060
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004080
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new device found, idVendor=03f0, idProduct=171d
>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1: Product: HP Integrated Module
>usb 1-1: Manufacturer: Broadcom Corp
>usb 1-1: configuration #1 chosen from 1 choice
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf4784000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.22.9-0.4-default ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>swsusp: Basic memory bitmaps created
>swsusp: Basic memory bitmaps freed
>Attempting manual resume
>input: PS/2 Generic Mouse as /class/input/input3
>usb 1-1: USB disconnect, address 2
>usb 1-1: new full speed USB device using uhci_hcd and address 3
>usb 1-1: new device found, idVendor=03f0, idProduct=171d
>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1: Product: HP Integrated Module
>usb 1-1: Manufacturer: Broadcom Corp
>usb 1-1: configuration #1 chosen from 1 choice
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: new device found, idVendor=08ff, idProduct=2580
>usb 2-1: new device strings: Mfr=0, Product=1, SerialNumber=0
>usb 2-1: Product: Fingerprint Sensor
>usb 2-1: configuration #1 chosen from 1 choice
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: new device found, idVendor=045e, idProduct=0084
>usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: Basic Optical Mouse
>usb 3-1: Manufacturer: Microsoft
>usb 3-1: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver hiddev
>input: Microsoft Basic Optical Mouse as /class/input/input4
>input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.2-1
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Linux agpgart interface v0.102 (c) Dave Jones
>intel_rng: FWH not detected
>tg3.c:v3.77 (May 31, 2007)
>ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:08:00.0 to 64
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>eth0: Tigon3 [partno(BCM95751M) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:44:b4:08
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ACPI: Battery Slot [C1B4] (battery present)
>ACPI: Battery Slot [C1B3] (battery absent)
>ACPI: AC Adapter [C1B2] (on-line)
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [C249]
>input: Lid Switch as /class/input/input7
>iTCO_vendor_support: vendor-support=0
>ACPI: Lid Switch [C241]
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>ACPI: PCI Interrupt 0000:02:06.2[A] -> GSI 18 (level, low) -> IRQ 19
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Yenta: CardBus bridge found at 0000:02:06.0 [103c:30ad]
>Yenta: Enabling burst memory read transactions
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:06.0, mfunc 0x01aa1b22, devctl 0x64
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:06 failed with error -16
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 19
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>cs: IO port probe 0x5000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf45fffff
>pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
>sdhci: SDHCI controller found at 0000:02:06.3 [104c:803c] (rev 0)
>ACPI: PCI Interrupt 0000:02:06.3[C] -> GSI 22 (level, low) -> IRQ 22
>mmc0: SDHCI at 0xf4202000 irq 22 PIO
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.0
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>wmaster0: Selected rate control algorithm 'iwl-3945-rs'
>wmaster0 renamed to eth1
>udev: renamed network interface wmaster0 to eth1
>wlan0 renamed to wlan0_rename
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Adding 2104472k swap on /dev/sda1.  Priority:-1 extents:1 across:2104472k
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>AppArmor: AppArmor initialized
>audit(1192538872.112:2):  type=1505 info="AppArmor initialized" pid=2368
>powernow: This module only works with AMD K7 CPUs
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready
>PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100406, writing 100006)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>audit(1192538888.113:3): audit_pid=3130 old=0 by auid=4294967295
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 17
>vmmon: module license 'unspecified' taints kernel.
>/dev/vmmon[3700]: VMCI: Driver initialized.
>/dev/vmmon[3700]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[3700]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
>/dev/vmmon[3700]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
>/dev/vmmon[3700]: Module vmmon: initialized
>/dev/vmnet: open called by PID 3779 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>bridge-eth0: already up
>bridge-eth0: attached
>/dev/vmnet: open called by PID 3796 (vmnet-netifup)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>eth0: no IPv6 routers present
>/dev/vmnet: open called by PID 3795 (vmnet-dhcpd)
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 3843 (vmnet-netifup)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 3842 (vmnet-dhcpd)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 3873 (vmnet-natd)
>/dev/vmnet: port on hub 8 successfully opened
>vmnet1: no IPv6 routers present
>vmnet8: no IPv6 routers present
>eth0: no IPv6 routers present
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:04:e2:eb:02:80:08:00 SRC=192.168.200.50 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=4039 PROTO=2 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100406, writing 100006)
>bridge-eth0: disabling the bridge
>bridge-eth0: down
>Stopping tasks ... done.
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>ACPI: PCI interrupt for device 0000:02:06.3 disabled
>ACPI: PCI interrupt for device 0000:02:06.2 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>pci_set_power_state(): 0000:00:1f.1: state=3, current state=5
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: Transitioning device [C11A] to D3
>ACPI: Transitioning device [C11A] to D3
>Disabling non-boot CPUs ...
>Breaking affinity for irq 12
>Breaking affinity for irq 16
>Breaking affinity for irq 21
>Breaking affinity for irq 218
>Breaking affinity for irq 220
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
> hwsleep-0322 [00] enter_sleep_state     : Entering sleep state [S3]
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.33 BogoMIPS (lpj=7980672)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>CPU1 is up
>PM: Writing back config space on device 0000:00:02.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:02.0 at offset 7 (was 0, writing f4680000)
>PM: Writing back config space on device 0000:00:02.0 at offset 6 (was 8, writing e0000008)
>PM: Writing back config space on device 0000:00:02.0 at offset 5 (was 1, writing 4001)
>PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PM: Writing back config space on device 0000:00:02.1 at offset 4 (was 0, writing f4700000)
>PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
>PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10)
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset f (was 100, writing 4010a)
>PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 1fff1)
>PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing f410f410)
>PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 0, writing 200000f0)
>PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100407)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset f (was 200, writing 4020a)
>PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
>PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing f400f400)
>PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0)
>PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100407)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset f (was 400, writing 40405)
>PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing 1fff1)
>PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 3020)
>PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100407)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:1d.0 at offset 8 (was 1, writing 4021)
>usb usb1: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
>PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing 4041)
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
>PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing 4061)
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.3 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 405)
>PM: Writing back config space on device 0000:00:1d.3 at offset 8 (was 1, writing 4081)
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1d.7 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing f4784000)
>PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 83f18001)
>PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing f450f420)
>PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 228000f0, writing 22805050)
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100007, writing 100107)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:1f.1 at offset 8 (was c01, writing 40a1)
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata6: port disabled. ignoring.
>PM: Writing back config space on device 0000:00:1f.2 at offset 9 (was fec01000, writing f4785000)
>PM: Writing back config space on device 0000:00:1f.2 at offset 8 (was 1301, writing 40d1)
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata5.00: configured for MWDMA2
>Coming out of suspend...
>PCI: Enabling device 0000:10:00.0 (0000 -> 0002)
>PM: Writing back config space on device 0000:10:00.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:10:00.0 at offset 4 (was 0, writing f4000000)
>PM: Writing back config space on device 0000:10:00.0 at offset 3 (was 0, writing 10)
>PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100406)
>PM: Writing back config space on device 0000:02:06.0 at offset f (was 34001ff, writing 5c0010b)
>PM: Writing back config space on device 0000:02:06.0 at offset e (was 0, writing 54fc)
>PM: Writing back config space on device 0000:02:06.0 at offset d (was 0, writing 5400)
>PM: Writing back config space on device 0000:02:06.0 at offset c (was 0, writing 50fc)
>PM: Writing back config space on device 0000:02:06.0 at offset b (was 0, writing 5000)
>PM: Writing back config space on device 0000:02:06.0 at offset a (was 0, writing 87fff000)
>PM: Writing back config space on device 0000:02:06.0 at offset 9 (was 0, writing 84000000)
>PM: Writing back config space on device 0000:02:06.0 at offset 8 (was 0, writing 83fff000)
>PM: Writing back config space on device 0000:02:06.0 at offset 7 (was 0, writing 80000000)
>PM: Writing back config space on device 0000:02:06.0 at offset 6 (was 0, writing b0060302)
>PM: Writing back config space on device 0000:02:06.0 at offset 4 (was 0, writing f4200000)
>PM: Writing back config space on device 0000:02:06.0 at offset 3 (was 820000, writing 82a820)
>PM: Writing back config space on device 0000:02:06.0 at offset 1 (was 2100000, writing 2100007)
>PM: Writing back config space on device 0000:02:06.2 at offset f (was 40701ff, writing 407010b)
>PM: Writing back config space on device 0000:02:06.2 at offset 4 (was 0, writing f4201000)
>PM: Writing back config space on device 0000:02:06.2 at offset 3 (was 800000, writing 804010)
>PM: Writing back config space on device 0000:02:06.2 at offset 1 (was 2100000, writing 2100006)
>ACPI: PCI Interrupt 0000:02:06.2[A] -> GSI 18 (level, low) -> IRQ 19
>PM: Writing back config space on device 0000:02:06.3 at offset f (was 40703ff, writing 407030b)
>PM: Writing back config space on device 0000:02:06.3 at offset 4 (was 0, writing f4202000)
>PM: Writing back config space on device 0000:02:06.3 at offset 3 (was 800000, writing 804010)
>PM: Writing back config space on device 0000:02:06.3 at offset 1 (was 2100000, writing 2100006)
>ACPI: PCI Interrupt 0000:02:06.3[C] -> GSI 22 (level, low) -> IRQ 22
>PM: Writing back config space on device 0000:02:06.4 at offset f (was 1ff, writing 10b)
>PM: Writing back config space on device 0000:02:06.4 at offset 5 (was 0, writing f4204000)
>PM: Writing back config space on device 0000:02:06.4 at offset 4 (was 0, writing f4203000)
>PM: Writing back config space on device 0000:02:06.4 at offset 1 (was 2100000, writing 2100002)
>ata2: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>ata4: SATA link down (SStatus 0 SControl 0)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: configured for UDMA/133
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] Starting disk
>usb_endpoint usbdev1.3_ep00: PM: resume from 0, parent 1-1 still 2
>hci_usb 1-1:1.0: PM: resume from 2, parent 1-1 still 2
>usb_endpoint usbdev1.3_ep81: PM: resume from 0, parent 1-1:1.0 still 2
>usb_endpoint usbdev1.3_ep82: PM: resume from 0, parent 1-1:1.0 still 2
>usb_endpoint usbdev1.3_ep02: PM: resume from 0, parent 1-1:1.0 still 2
>hci_usb 1-1:1.1: PM: resume from 2, parent 1-1 still 2
>usb 1-1:1.2: PM: resume from 2, parent 1-1 still 2
>usb_endpoint usbdev1.3_ep84: PM: resume from 0, parent 1-1:1.2 still 2
>usb_endpoint usbdev1.3_ep04: PM: resume from 0, parent 1-1:1.2 still 2
>usb 1-1:1.3: PM: resume from 2, parent 1-1 still 2
>usb_endpoint usbdev2.2_ep00: PM: resume from 0, parent 2-1 still 2
>usb 2-1:1.0: PM: resume from 2, parent 2-1 still 2
>usb_endpoint usbdev2.2_ep81: PM: resume from 0, parent 2-1:1.0 still 2
>usb_endpoint usbdev2.2_ep02: PM: resume from 0, parent 2-1:1.0 still 2
>usb_endpoint usbdev3.2_ep00: PM: resume from 0, parent 3-1 still 2
>usbhid 3-1:1.0: PM: resume from 2, parent 3-1 still 2
>usb_endpoint usbdev3.2_ep81: PM: resume from 0, parent 3-1:1.0 still 2
>usb_endpoint usbdev1.3_ep83: PM: resume from 0, parent 1-1:1.1 still 2
>usb_endpoint usbdev1.3_ep03: PM: resume from 0, parent 1-1:1.1 still 2
>bluetooth hci0: PM: resume from 0, parent 1-1:1.0 still 2
>Restarting tasks ... <6>usb 1-1: USB disconnect, address 3
>done.
>usb 2-1: USB disconnect, address 2
>usb 3-1: USB disconnect, address 2
>ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready
>usb 3-1: new low speed USB device using uhci_hcd and address 3
>PM: Writing back config space on device 0000:08:00.0 at offset 3 (was 0, writing 10)
>PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100400, writing 100006)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>usb 3-1: new device found, idVendor=045e, idProduct=0084
>usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: Basic Optical Mouse
>usb 3-1: Manufacturer: Microsoft
>usb 3-1: configuration #1 chosen from 1 choice
>input: Microsoft Basic Optical Mouse as /class/input/input8
>input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.2-1
>usb 1-1: new full speed USB device using uhci_hcd and address 4
>usb 1-1: new device found, idVendor=03f0, idProduct=171d
>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1: Product: HP Integrated Module
>usb 1-1: Manufacturer: Broadcom Corp
>usb 1-1: configuration #1 chosen from 1 choice
>usb 2-1: new full speed USB device using uhci_hcd and address 3
>usb 2-1: new device found, idVendor=08ff, idProduct=2580
>usb 2-1: new device strings: Mfr=0, Product=1, SerialNumber=0
>usb 2-1: Product: Fingerprint Sensor
>usb 2-1: configuration #1 chosen from 1 choice
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=357 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=337 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=248 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=228 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=357 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=337 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=357 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=337 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=166 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=146 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>eth0: no IPv6 routers present
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:04:e2:eb:02:80:08:00 SRC=192.168.200.50 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=4041 PROTO=2 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:04:e2:eb:02:80:08:00 SRC=192.168.200.50 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=4043 PROTO=2 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.200.42 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44

Actions: View

Attachments on bug 334170: 178782 | 178840 | 178842 | 178843