Attachment 179577 Details for Bug 335499

output dmesg

dmesg (text/plain), 77.90 KB, created by Rastislav Krupansky on 2007-10-20 21:52:48 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Rastislav Krupansky

Created: 2007-10-20 21:52:48 UTC

Size: 77.90 KB

patch

obsolete

>Linux version 2.6.22.9-0.4-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/10/05 21:32:04 UTC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000004fff0000 (usable)
> BIOS-e820: 000000004fff0000 - 000000004fff3000 (ACPI NVS)
> BIOS-e820: 000000004fff3000 - 0000000050000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>383MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5bf0
>Entering add_active_range(0, 0, 327664) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   327664
>early_node_map[1] active PFN ranges
>    0:        0 ->   327664
>On node 0 totalpages: 327664
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 767 pages used for memmap
>  HighMem zone: 97521 pages, LIFO batch:31
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F7620, 0014 (r0 Nvidia)
>ACPI: RSDT 4FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 4FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 4FFF30C0, 4E50 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 4FFF0000, 0040
>ACPI: APIC 4FFF7F40, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:10 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
>Built 1 zonelists.  Total pages: 325105
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD800JD-00M_WD-WCAM9T831492-part5 vga=0x31a resume=/dev/sda6 splash=silent
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1833.429 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1290868k/1310656k available (1824k kernel code, 18480k reserved, 761k data, 228k init, 393152k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffdf4000 - 0xfffff000   (2092 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc038e000 - 0xc03c7000   ( 228 kB)
>      .data : 0xc02c832b - 0xc0386964   ( 761 kB)
>      .text : 0xc0100000 - 0xc02c832b   (1824 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3669.71 BogoMIPS (lpj=7339437)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>Unpacking initramfs... done
>Freeing initrd memory: 4034k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 823 Objects with 84 Devices 284 Methods 33 Regions
> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>CPU0: AMD Athlon(tm) XP 2500+ stepping 00
>Total of 1 processors activated (3669.71 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...  failed.
>...trying to set up timer as Virtual Wire IRQ... failed.
>...trying to set up timer as ExtINT IRQ... works.
>Brought up 1 CPUs
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbe50, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 20 to 5F [_GPE] 8 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 0 Runtime GPEs in this block
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:..................................................................................
>Initialized 33/33 Regions 1/1 Fields 31/31 Buffers 17/25 Packages (832 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:.
>Executed 1 _INI methods requiring 1 _STA executions (examined 87 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs *16)
>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21) *0
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23)
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21) *0, disabled.
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 22) *0
>ACPI: Power Resource [ISAV] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>ACPI: RTC can wake from S4
>pnp: 00:00: ioport range 0x4000-0x407f has been reserved
>pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
>pnp: 00:00: ioport range 0x4400-0x447f has been reserved
>pnp: 00:00: ioport range 0x4480-0x44ff has been reserved
>pnp: 00:00: ioport range 0x4200-0x427f has been reserved
>pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
>pnp: 00:01: ioport range 0x5000-0x503f has been reserved
>pnp: 00:01: ioport range 0x5100-0x513f has been reserved
>pnp: 00:02: iomem range 0xd5800-0xd7fff has been reserved
>pnp: 00:02: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:02: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:02: iomem range 0xfc000-0xfffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:08.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: e8000000-eaffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>audit(1192919289.588:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 10240k, total 131072k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: protected mode interface info at c000:d5f0
>vesafb: pmi: set display start = c00cd626, set palette = c00cd690
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 98233 bytes
>bootsplash: ...found (1280x1024, 35219 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>Switched to NOHz mode on CPU #0
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 228k freed
>SCSI subsystem initialized
>libata version 3.00 loaded.
>pata_amd 0000:00:09.0: version 0.3.8
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
>ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A106, max UDMA/33
>ata1.00: configured for UDMA/33
>ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A106 PQ: 0 ANSI: 5
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5
>sata_nv 0000:00:0b.0: version 3.4
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APSI] -> GSI 22 (level, high) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001d000 irq 16
>ata4: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001d008 irq 16
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-7: WDC WD800JD-00MSA1, 10.01E01, max UDMA/133
>ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD800JD-00MS 10.0 PQ: 0 ANSI: 5
>SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 17, io mem 0xeb001000
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.22.9-0.4-default ohci_hcd
>usb usb1: SerialNumber: 0000:00:02.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.1: irq 18, io mem 0xeb002000
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.22.9-0.4-default ohci_hcd
>usb usb2: SerialNumber: 0000:00:02.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
> sda1 sda2 < sda5 sda6 >
>sd 2:0:0:0: [sda] Attached SCSI disk
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:02.2 to 64
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:02.2: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.2
>ehci_hcd 0000:00:02.2: irq 17, io mem 0xeb003000
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: EHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.22.9-0.4-default ehci_hcd
>usb usb3: SerialNumber: 0000:00:02.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>usb 3-3: new high speed USB device using ehci_hcd and address 2
>swsusp: Basic memory bitmaps created
>swsusp: Basic memory bitmaps freed
>Attempting manual resume
>usb 3-3: new device found, idVendor=04b4, idProduct=6830
>usb 3-3: new device strings: Mfr=0, Product=76, SerialNumber=63
>usb 3-3: Product: Cypress AT2LP      RC7
>usb 3-3: SerialNumber: CB000A702D58
>usb 3-3: configuration #1 chosen from 1 choice
>XFS mounting filesystem sda5
>Ending clean XFS mount for filesystem: sda5
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 1:0:0:0: Attached scsi CD-ROM sr1
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Linux agpgart interface v0.102 (c) Dave Jones
>parport_pc 00:0c: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100
>agpgart: Detected NVIDIA nForce2 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 20 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:06 failed with error -16
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Initializing USB Mass Storage driver...
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>scsi4 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>eth0: forcedeth.c: subsystem: 01462:570c bound to 0000:00:04.0
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>intel8x0_measure_ac97_clock: measured 54576 usecs
>intel8x0: clocking to 47486
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 19
>NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
>scsi 4:0:0:0: Direct-Access     Maxtor 6 Y080P0           0000 PQ: 0 ANSI: 0
>sd 4:0:0:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 27 00 00 00
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
>sd 4:0:0:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 27 00 00 00
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
> sdb: p1 exceeds device capacity
>sd 4:0:0:0: [sdb] Attached SCSI disk
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>attempt to access beyond end of device
>sdb: rw=0, want=160087489, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043712
>attempt to access beyond end of device
>sdb: rw=0, want=160087491, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043713
>attempt to access beyond end of device
>sdb: rw=0, want=160087493, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043714
>attempt to access beyond end of device
>sdb: rw=0, want=160087495, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043715
>attempt to access beyond end of device
>sdb: rw=0, want=160087489, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043712
>attempt to access beyond end of device
>sdb: rw=0, want=160087491, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043713
>attempt to access beyond end of device
>sdb: rw=0, want=160087493, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043714
>attempt to access beyond end of device
>sdb: rw=0, want=160087495, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043715
>attempt to access beyond end of device
>sdb: rw=0, want=160087489, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043712
>attempt to access beyond end of device
>sdb: rw=0, want=160087491, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043713
>attempt to access beyond end of device
>sdb: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087657, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087659, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087661, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087663, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087713, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087715, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087717, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087719, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>Adding 1052216k swap on /dev/sda6.  Priority:-1 extents:1 across:1052216k
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>loop: module loaded
>fuse init (API version 7.8)
>powernow-k8: Processor cpuid 6a0 not supported
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>attempt to access beyond end of device
>sdb: rw=0, want=160087489, limit=160086528
>printk: 37 messages suppressed.
>Buffer I/O error on device sdb1, logical block 80043712
>attempt to access beyond end of device
>sdb: rw=0, want=160087491, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043713
>attempt to access beyond end of device
>sdb: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087489, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087491, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087489, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087491, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087657, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087659, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087661, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087663, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087713, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087715, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087717, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087719, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>audit(1192912324.796:2): audit_backlog_limit=320 old=64 by auid=4294967295 res=1
>audit(1192912324.796:3): audit_pid=2590 old=0 by auid=4294967295
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>NET: Registered protocol family 17
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=1 DF PROTO=2 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=350 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=330 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=245 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=225 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=350 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=330 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=366 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=346 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=2 DF PROTO=2 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=320 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=300 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=3 DF PROTO=2 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=4 DF PROTO=2 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=5 DF PROTO=2 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=6 DF PROTO=2 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.203.227.129 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=43360 DF PROTO=TCP SPT=14468 DPT=80 WINDOW=64 RES=0x00 ACK FIN URGP=0 OPT (0101080A00010EF40CBDBF9C) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.8 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1569 DF PROTO=TCP SPT=9796 DPT=80 WINDOW=757 RES=0x00 ACK FIN URGP=0 OPT (0101080A00011144014FC5A5) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.39 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=48772 DF PROTO=TCP SPT=1659 DPT=80 WINDOW=94 RES=0x00 ACK FIN URGP=0 OPT (0101080A0001152202B09655) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.8 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56904 DF PROTO=TCP SPT=9860 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A0001268E014FC5DD) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.8 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=51527 DF PROTO=TCP SPT=9793 DPT=80 WINDOW=757 RES=0x00 ACK FIN URGP=0 OPT (0101080A000134DC014FC5DA) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.8 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2887 DF PROTO=TCP SPT=9795 DPT=80 WINDOW=757 RES=0x00 ACK FIN URGP=0 OPT (0101080A00013ED2014FC5DF) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.8 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1570 DF PROTO=TCP SPT=9796 DPT=80 WINDOW=757 RES=0x00 ACK FIN URGP=0 OPT (0101080A00015AC4014FC5A5) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=7 DF PROTO=2 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.8 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56905 DF PROTO=TCP SPT=9860 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A0001828E014FC5DD) 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=8 DF PROTO=2 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=9 DF PROTO=2 
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=10 DF PROTO=2 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=11 DF PROTO=2 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=12 DF PROTO=2 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=13 DF PROTO=2 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=14 DF PROTO=2 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=15 DF PROTO=2 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=16 DF PROTO=2 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=17 DF PROTO=2 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=18 DF PROTO=2 
>end_request: I/O error, dev sr0, sector 64
>isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=19 DF PROTO=2 
>usb 3-3: USB disconnect, address 2
>usb 3-3: new high speed USB device using ehci_hcd and address 3
>usb 3-3: new device found, idVendor=04b4, idProduct=6830
>usb 3-3: new device strings: Mfr=0, Product=76, SerialNumber=63
>usb 3-3: Product: Cypress AT2LP      RC7
>usb 3-3: SerialNumber: CB000A702D58
>usb 3-3: configuration #1 chosen from 1 choice
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>scsi 5:0:0:0: Direct-Access     Maxtor 6 Y080P0           0000 PQ: 0 ANSI: 0
>sd 5:0:0:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
>sd 5:0:0:0: [sdb] Write Protect is off
>sd 5:0:0:0: [sdb] Mode Sense: 27 00 00 00
>sd 5:0:0:0: [sdb] Assuming drive cache: write through
>sd 5:0:0:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
>sd 5:0:0:0: [sdb] Write Protect is off
>sd 5:0:0:0: [sdb] Mode Sense: 27 00 00 00
>sd 5:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
> sdb: p1 exceeds device capacity
>sd 5:0:0:0: [sdb] Attached SCSI disk
>sd 5:0:0:0: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>attempt to access beyond end of device
>sdb: rw=0, want=160087489, limit=160086528
>printk: 45 messages suppressed.
>Buffer I/O error on device sdb1, logical block 80043712
>attempt to access beyond end of device
>sdb: rw=0, want=160087491, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043713
>attempt to access beyond end of device
>sdb: rw=0, want=160087493, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043714
>attempt to access beyond end of device
>sdb: rw=0, want=160087495, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043715
>attempt to access beyond end of device
>sdb: rw=0, want=160087489, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043712
>attempt to access beyond end of device
>sdb: rw=0, want=160087491, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043713
>attempt to access beyond end of device
>sdb: rw=0, want=160087493, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043714
>attempt to access beyond end of device
>sdb: rw=0, want=160087495, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043715
>attempt to access beyond end of device
>sdb: rw=0, want=160087489, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043712
>attempt to access beyond end of device
>sdb: rw=0, want=160087491, limit=160086528
>Buffer I/O error on device sdb1, logical block 80043713
>attempt to access beyond end of device
>sdb: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087657, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087659, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087661, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087663, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087713, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087715, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087717, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087719, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087489, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087491, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087489, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087491, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087489, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087491, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087657, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087659, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087661, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087663, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087713, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087715, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087717, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087719, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdb: rw=0, want=160087725, limit=160086528
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=20 DF PROTO=2 
>usb 3-1: new high speed USB device using ehci_hcd and address 4
>usb 3-1: new device found, idVendor=3538, idProduct=0042
>usb 3-1: new device strings: Mfr=0, Product=2, SerialNumber=3
>usb 3-1: Product: USB Mass Storage Device
>usb 3-1: SerialNumber: 6650eae25b82df
>usb 3-1: configuration #1 chosen from 1 choice
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>scsi 6:0:0:0: Direct-Access     PQI      Cool Drive       1.00 PQ: 0 ANSI: 2
>sd 6:0:0:0: [sdc] 1024000 512-byte hardware sectors (524 MB)
>sd 6:0:0:0: [sdc] Write Protect is off
>sd 6:0:0:0: [sdc] Mode Sense: 00 00 00 00
>sd 6:0:0:0: [sdc] Assuming drive cache: write through
>sd 6:0:0:0: [sdc] 1024000 512-byte hardware sectors (524 MB)
>sd 6:0:0:0: [sdc] Write Protect is off
>sd 6:0:0:0: [sdc] Mode Sense: 00 00 00 00
>sd 6:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
>sd 6:0:0:0: [sdc] Attached SCSI removable disk
>sd 6:0:0:0: Attached scsi generic sg4 type 0
>usb-storage: device scan complete
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=21 DF PROTO=2 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.32 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=5443 DF PROTO=TCP SPT=14553 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A00088B420255BE16) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.32 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=48922 DF PROTO=TCP SPT=14554 DPT=80 WINDOW=86 RES=0x00 ACK FIN URGP=0 OPT (0101080A00088C410255BE17) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.32 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=6268 DF PROTO=TCP SPT=14555 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A0008906B0255BE18) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16789 DF PROTO=TCP SPT=5804 DPT=80 WINDOW=757 RES=0x00 ACK FIN URGP=0 OPT (0101080A0008911F02B0E133) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=38649 DF PROTO=TCP SPT=5809 DPT=80 WINDOW=129 RES=0x00 ACK FIN URGP=0 OPT (0101080A0008936802B0E133) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.30 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16058 DF PROTO=TCP SPT=12148 DPT=80 WINDOW=757 RES=0x00 ACK FIN URGP=0 OPT (0101080A0008A4EB00A3A654) 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.44 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=34024 DF PROTO=TCP SPT=10859 DPT=80 WINDOW=286 RES=0x00 ACK FIN URGP=0 OPT (0101080A0008C9AC03292281) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.44 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27658 DF PROTO=TCP SPT=10863 DPT=80 WINDOW=163 RES=0x00 ACK FIN URGP=0 OPT (0101080A0008CA5A0329227D) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=22 DF PROTO=2 
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.30 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16059 DF PROTO=TCP SPT=12148 DPT=80 WINDOW=757 RES=0x00 ACK FIN URGP=0 OPT (0101080A0008F0EB00A3A654) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=54773 DF PROTO=TCP SPT=5817 DPT=80 WINDOW=61 RES=0x00 ACK FIN URGP=0 OPT (0101080A0008FD6402B0E143) 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.44 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=34025 DF PROTO=TCP SPT=10859 DPT=80 WINDOW=286 RES=0x00 ACK FIN URGP=0 OPT (0101080A00093CAC03292281) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.44 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=64295 DF PROTO=TCP SPT=10864 DPT=80 WINDOW=757 RES=0x00 ACK FIN URGP=0 OPT (0101080A00093E9C03292282) 
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.2 DST=193.86.85.44 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27659 DF PROTO=TCP SPT=10863 DPT=80 WINDOW=163 RES=0x00 ACK FIN URGP=0 OPT (0101080A00093EDA0329227D) 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=23 DF PROTO=2 
>usb 3-1: USB disconnect, address 4
>usb 3-3: USB disconnect, address 3
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24 DF PROTO=2 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>usb 3-1: new high speed USB device using ehci_hcd and address 5
>usb 3-1: new device found, idVendor=3538, idProduct=0042
>usb 3-1: new device strings: Mfr=0, Product=2, SerialNumber=3
>usb 3-1: Product: USB Mass Storage Device
>usb 3-1: SerialNumber: 6650eae25b82df
>usb 3-1: configuration #1 chosen from 1 choice
>scsi7 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>scsi 7:0:0:0: Direct-Access     PQI      Cool Drive       1.00 PQ: 0 ANSI: 2
>sd 7:0:0:0: [sdb] 1024000 512-byte hardware sectors (524 MB)
>sd 7:0:0:0: [sdb] Write Protect is off
>sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
>sd 7:0:0:0: [sdb] Assuming drive cache: write through
>sd 7:0:0:0: [sdb] 1024000 512-byte hardware sectors (524 MB)
>sd 7:0:0:0: [sdb] Write Protect is off
>sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
>sd 7:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 7:0:0:0: [sdb] Attached SCSI removable disk
>sd 7:0:0:0: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 3-3: new high speed USB device using ehci_hcd and address 6
>usb 3-3: new device found, idVendor=04b4, idProduct=6830
>usb 3-3: new device strings: Mfr=0, Product=76, SerialNumber=63
>usb 3-3: Product: Cypress AT2LP      RC7
>usb 3-3: SerialNumber: CB000A702D58
>usb 3-3: configuration #1 chosen from 1 choice
>scsi8 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>scsi 8:0:0:0: Direct-Access     Maxtor 6 Y080P0           0000 PQ: 0 ANSI: 0
>sd 8:0:0:0: [sdc] 160086528 512-byte hardware sectors (81964 MB)
>sd 8:0:0:0: [sdc] Write Protect is off
>sd 8:0:0:0: [sdc] Mode Sense: 27 00 00 00
>sd 8:0:0:0: [sdc] Assuming drive cache: write through
>sd 8:0:0:0: [sdc] 160086528 512-byte hardware sectors (81964 MB)
>sd 8:0:0:0: [sdc] Write Protect is off
>sd 8:0:0:0: [sdc] Mode Sense: 27 00 00 00
>sd 8:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
> sdc: p1 exceeds device capacity
>sd 8:0:0:0: [sdc] Attached SCSI disk
>sd 8:0:0:0: Attached scsi generic sg4 type 0
>usb-storage: device scan complete
>attempt to access beyond end of device
>sdc: rw=0, want=160087489, limit=160086528
>printk: 84 messages suppressed.
>Buffer I/O error on device sdc1, logical block 80043712
>attempt to access beyond end of device
>sdc: rw=0, want=160087491, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043713
>attempt to access beyond end of device
>sdc: rw=0, want=160087493, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043714
>attempt to access beyond end of device
>sdc: rw=0, want=160087495, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043715
>attempt to access beyond end of device
>sdc: rw=0, want=160087489, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043712
>attempt to access beyond end of device
>sdc: rw=0, want=160087491, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043713
>attempt to access beyond end of device
>sdc: rw=0, want=160087493, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043714
>attempt to access beyond end of device
>sdc: rw=0, want=160087495, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043715
>attempt to access beyond end of device
>sdc: rw=0, want=160087489, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043712
>attempt to access beyond end of device
>sdc: rw=0, want=160087491, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043713
>attempt to access beyond end of device
>sdc: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087657, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087659, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087661, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087663, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087713, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087715, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087717, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087719, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087489, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087491, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087489, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087491, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087489, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087491, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087657, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087659, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087661, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087663, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087713, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087715, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087717, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087719, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=25 DF PROTO=2 
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=26 DF PROTO=2 
>usb 3-1: USB disconnect, address 5
>usb 3-3: USB disconnect, address 6
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>usb 3-1: new high speed USB device using ehci_hcd and address 7
>usb 3-1: new device found, idVendor=3538, idProduct=0042
>usb 3-1: new device strings: Mfr=0, Product=2, SerialNumber=3
>usb 3-1: Product: USB Mass Storage Device
>usb 3-1: SerialNumber: 6650eae25b82df
>usb 3-1: configuration #1 chosen from 1 choice
>scsi9 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 7
>usb-storage: waiting for device to settle before scanning
>scsi 9:0:0:0: Direct-Access     PQI      Cool Drive       1.00 PQ: 0 ANSI: 2
>sd 9:0:0:0: [sdb] 1024000 512-byte hardware sectors (524 MB)
>sd 9:0:0:0: [sdb] Write Protect is off
>sd 9:0:0:0: [sdb] Mode Sense: 00 00 00 00
>sd 9:0:0:0: [sdb] Assuming drive cache: write through
>sd 9:0:0:0: [sdb] 1024000 512-byte hardware sectors (524 MB)
>sd 9:0:0:0: [sdb] Write Protect is off
>sd 9:0:0:0: [sdb] Mode Sense: 00 00 00 00
>sd 9:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 9:0:0:0: [sdb] Attached SCSI removable disk
>sd 9:0:0:0: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 3-3: new high speed USB device using ehci_hcd and address 8
>usb 3-3: new device found, idVendor=04b4, idProduct=6830
>usb 3-3: new device strings: Mfr=0, Product=76, SerialNumber=63
>usb 3-3: Product: Cypress AT2LP      RC7
>usb 3-3: SerialNumber: CB000A702D58
>usb 3-3: configuration #1 chosen from 1 choice
>scsi10 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 8
>usb-storage: waiting for device to settle before scanning
>scsi 10:0:0:0: Direct-Access     Maxtor 6 Y080P0           0000 PQ: 0 ANSI: 0
>sd 10:0:0:0: [sdc] 160086528 512-byte hardware sectors (81964 MB)
>sd 10:0:0:0: [sdc] Write Protect is off
>sd 10:0:0:0: [sdc] Mode Sense: 27 00 00 00
>sd 10:0:0:0: [sdc] Assuming drive cache: write through
>sd 10:0:0:0: [sdc] 160086528 512-byte hardware sectors (81964 MB)
>sd 10:0:0:0: [sdc] Write Protect is off
>sd 10:0:0:0: [sdc] Mode Sense: 27 00 00 00
>sd 10:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
> sdc: p1 exceeds device capacity
>sd 10:0:0:0: [sdc] Attached SCSI disk
>sd 10:0:0:0: Attached scsi generic sg4 type 0
>usb-storage: device scan complete
>attempt to access beyond end of device
>sdc: rw=0, want=160087489, limit=160086528
>printk: 84 messages suppressed.
>Buffer I/O error on device sdc1, logical block 80043712
>attempt to access beyond end of device
>sdc: rw=0, want=160087491, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043713
>attempt to access beyond end of device
>sdc: rw=0, want=160087493, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043714
>attempt to access beyond end of device
>sdc: rw=0, want=160087495, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043715
>attempt to access beyond end of device
>sdc: rw=0, want=160087489, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043712
>attempt to access beyond end of device
>sdc: rw=0, want=160087491, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043713
>attempt to access beyond end of device
>sdc: rw=0, want=160087493, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043714
>attempt to access beyond end of device
>sdc: rw=0, want=160087495, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043715
>attempt to access beyond end of device
>sdc: rw=0, want=160087489, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043712
>attempt to access beyond end of device
>sdc: rw=0, want=160087491, limit=160086528
>Buffer I/O error on device sdc1, logical block 80043713
>attempt to access beyond end of device
>sdc: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087657, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087659, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087661, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087663, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087713, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087715, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087717, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087719, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087489, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087491, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087489, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087491, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087489, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087491, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087493, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087495, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087657, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087659, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087661, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087663, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087713, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087715, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087717, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087719, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087721, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087723, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=160087725, limit=160086528
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:0e:f4:03:23:f3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=27 DF PROTO=2 
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.

Actions: View

Attachments on bug 335499: 179574 | 179575 | 179576 | 179577 | 179578