Attachment 180216 Details for Bug 335676

minicom.cap

minicom.cap (text/plain), 27.01 KB, created by Stanislav Brabec on 2007-10-24 11:50:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stanislav Brabec

Created: 2007-10-24 11:50:06 UTC

Size: 27.01 KB

patch

obsolete

>Linux version 2.6.22.5-31-debug (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC
>Command line: root=/dev/disk/by-id/scsi-SATA_ST3160827AS_3MT003CE-part5 vga=normal resume=/dev/sda1 splash=silent console=ttyS0,115200n8 console=tty0
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
> BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000FA3F0, 0014 (r0 AMI   )
>ACPI: RSDT 3FFF0000, 002C (r1 AMIINT VIA_K8         10 MSFT       97)
>ACPI: FACP 3FFF0030, 0081 (r1 AMIINT VIA_K8         11 MSFT       97)
>ACPI: DSDT 3FFF0120, 3683 (r1    VIA   VIA_K8     1000 MSFT  100000D)
>ACPI: FACS 3FFF8000, 0040
>ACPI: APIC 3FFF00C0, 0054 (r1 AMIINT VIA_K8          9 MSFT       97)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003fff0000
>Bootmem setup node 0 0000000000000000-000000003fff0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   262128
>ACPI: PM-Timer IO Port: 0x808
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 50808 bytes of per cpu data
>Built 1 zonelists.  Total pages: 256339
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST3160827AS_3MT003CE-part5 vga=normal resume=/dev/sda1 splash=silent console=ttyS0,115200n8 console=tty0
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2000.087 MHz processor.
>Console: colour VGA+ 80x25
>Checking aperture...
>CPU 0: aperture @ d0000000 size 128 MB
>Memory: 1020832k/1048512k available (2162k kernel code, 27292k reserved, 1432k data, 324k init)
>Calibrating delay using timer specific routine.. 4004.00 BogoMIPS (lpj=8008011)
>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
>kdb_cmd[0]: defcmd archkdb "" "First line arch debugging"
>kdb_cmd[7]: defcmd archkdbcpu "" "archkdb with only tasks on cpus"
>kdb_cmd[14]: defcmd archkdbshort "" "archkdb with less detailed backtrace"
>kdb_cmd[21]: defcmd archkdbcommon "" "Common arch debugging"
>Security Framework v1.0.0 initialized
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 21k freed
>Unpacking initramfs... done
>Freeing initrd memory: 4289k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 520 Objects with 48 Devices 149 Methods 26 Regions
> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>result 12500563
>Detected 12.500 MHz APIC timer.
>Brought up 1 CPUs
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 0 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:...........................................................................................
>Initialized 26/26 Regions 9/9 Fields 44/44 Buffers 12/24 Packages (529 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:.
>Executed 1 _INI methods requiring 0 _STA executions (examined 51 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 0 of device 0000:00:00.0
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 128M @ 0xd0000000
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>pnp: 00:04: iomem range 0xfee00000-0xfee00fff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: cde00000-cfefffff
>  PREFETCH window: bdd00000-cdcfffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 10, 5242880 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Initializing RT-Tester: OK
>audit: initializing netlink socket (disabled)
>audit(1193224971.812:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>input: GenPS/2 Genius Mouse as /class/input/input2
>NET: Registered protocol family 1
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1072k
>SCSI subsystem initialized
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17
>scsi0 : sata_promise
>scsi1 : sata_promise
>scsi2 : sata_promise
>ata1: SATA max UDMA/133 cmd 0xffffc200001ea200 ctl 0xffffc200001ea238 bmdma 0x0000000000000000 irq 17
>ata2: SATA max UDMA/133 cmd 0xffffc200001ea280 ctl 0xffffc200001ea2b8 bmdma 0x0000000000000000 irq 17
>ata3: PATA max UDMA/133 cmd 0xffffc200001ea300 ctl 0xffffc200001ea338 bmdma 0x0000000000000000 irq 17
>ata1: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 0)
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
>sata_via 0000:00:0f.0: routed to hard irq line 10
>scsi3 : sata_via
>scsi4 : sata_via
>ata4: SATA max UDMA/133 cmd 0x000000000001d800 ctl 0x000000000001d402 bmdma 0x000000000001c800 irq 20
>ata5: SATA max UDMA/133 cmd 0x000000000001d000 ctl 0x000000000001cc02 bmdma 0x000000000001c808 irq 20
>ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.00: ATA-6: ST3160827AS, 3.00, max UDMA/133
>ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata5.00: configured for UDMA/133
>scsi 4:0:0:0: Direct-Access     ATA      ST3160827AS      3.00 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
>scsi5 : pata_via
>scsi6 : pata_via
>ata6: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fc00 irq 14
>ata7: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fc08 irq 15
>ata7.00: ATAPI: TOSHIBA ODD-DVD SD-M1802, 1031, max UDMA/33
>ata7.00: configured for UDMA/33
>scsi 6:0:0:0: CD-ROM            TOSHIBA  ODD-DVD SD-M1802 1031 PQ: 0 ANSI: 5
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.22.5-31-debug uhci_hcd
>usb usb1: SerialNumber: 0000:00:10.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>sd 4:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 4:0:0:0: [sda] Write Protect is off
>sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 4:0:0:0: [sda] Write Protect is off
>sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5<6>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.22.5-31-debug uhci_hcd
>usb usb2: SerialNumber: 0000:00:10.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
> sda6 sda7 sda8 >
>sd 4:0:0:0: [sda] Attached SCSI disk
>ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000bc00
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.22.5-31-debug uhci_hcd
>usb usb3: SerialNumber: 0000:00:10.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c000
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.22.5-31-debug uhci_hcd
>usb usb4: SerialNumber: 0000:00:10.3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new device found, idVendor=05e3, idProduct=0701
>usb 1-1: new device strings: Mfr=2, Product=3, SerialNumber=0
>usb 1-1: Product: USB Mass Storage Device 
>usb 1-1: Manufacturer: Genesyslogic
>usb 1-1: configuration #1 chosen from 1 choice
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xcfffbd00
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.22.5-31-debug ehci_hcd
>usb usb5: SerialNumber: 0000:00:10.4
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 5-1: new high speed USB device using ehci_hcd and address 2
>usb 5-1: new device found, idVendor=05e3, idProduct=0701
>usb 5-1: new device strings: Mfr=2, Product=3, SerialNumber=0
>usb 5-1: Product: USB Mass Storage Device 
>usb 5-1: Manufacturer: Genesyslogic
>usb 5-1: configuration #1 chosen from 1 choice
>usb 1-1: USB disconnect, address 2
>usb 1-2: new low speed USB device using uhci_hcd and address 3
>usb 1-2: new device found, idVendor=051d, idProduct=0002
>usb 1-2: new device strings: Mfr=3, Product=1, SerialNumber=2
>usb 1-2: Product: Smart-UPS 750 FW:651.13.I USB FW:7.3
>usb 1-2: Manufacturer: American Power Conversion
>usb 1-2: SerialNumber: AS0713242662
>usb 1-2: configuration #1 chosen from 1 choice
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Oct 24 13:22:58 2007
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>done
>Starting udevd usb 2-2: new device found, idVendor=0db0, idProduct=6970
>usb 2-2: new device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-2: configuration #1 chosen from 1 choice
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>r8169 Gigabit Ethernet driver 2.2LK loaded
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 16
>sd 4:0:0:0: Attached scsi generic sg0 type 0
>scsi 6:0:0:0: Attached scsi generic sg1 type 5
>PCI: Disallowing DAC for device 0000:00:0b.0
>eth0: RTL8169s/8110s at 0xffffc200001eef00, 00:0c:76:e7:7d:98, IRQ 16
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[cffef000-cffef7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>usbcore: registered new interface driver hiddev
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Initializing USB Mass Storage driver...
>scsi7 : SCSI emulation for USB Mass Storage devices
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>parport_pc 00:03: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:06 failed with error -16
>ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
>scsi 7:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4120B A115 PQ: 0 ANSI: 0
>sr1: scsi3-mmc drive: 23x/23x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 7:0:0:0: Attached scsi generic sg2 type 5
>udevd-event[1736]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it
>hiddev96: USB HID v1.10 Device [American Power Conversion Smart-UPS 750 FW:651.13.I USB FW:7.3] on usb-0000:00:10.0-2
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb 2-2: USB disconnect, address 2
>usb 2-2: new full speed USB device using uhci_hcd and address 3
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>done
>Loading required kernel modules
>doneActivating swap-devices in /etc/Adding 2104472k swap on /dev/sda1.  Priority:-1 extents:1 across:2104472k
>fstab...
>doneusb 2-2: new device found, idVendor=0db0, idProduct=6970
>usb 2-2: new device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-2: configuration #1 chosen from 1 choice
>mount: according to mtab, /dev/sda5 is already mounted on /
>
>Activating device mapper...
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>done
>Checking file systems...
>fsck 1.40.2 (12-Jul-2007)
>Reiserfs super block in block 16 on 0x807 of format 3.6 with standard journal
>Blocks (total/free): 3933904/3126627 by 4096 bytes
>Filesystem is clean
>Replaying journal: Replaying journal: Done.
>Reiserfs journal '/dev/disk/by-id/scsi-SATA_ST3160827AS_3MT003CE-part7' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..  \|/-\finished
>Reiserfs super block in block 16 on 0x808 of format 3.6 with standard journal
>Blocks (total/free): 18876352/966291 by 4096 bytes
>Filesystem is clean
>Replaying journal: Replaying journal: Done.
>Reiserfs journal '/dev/disk/by-id/scsi-SATA_ST3160827AS_3MT003CE-part8' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..  \|/-\|/finished
>Reiserfs super block in block 16 on 0x803 of format 3.6 with standard journal
>Blocks (total/free): 3933904/1640483 by 4096 bytes
>Filesystem is clean
>Replaying journal: Replaying journal: Done.
>Reiserfs journal '/dev/disk/by-id/scsi-SATA_ST3160827AS_3MT003CE-part3' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..  \|/-\|/finished
>Reiserfs super block in block 16 on 0x802 of format 3.6 with standard journal
>Blocks (total/free): 3933904/716179 by 4096 bytes
>Filesystem is clean
>Replaying journal: Replaying journal: Done.
>Reiserfs journal '/dev/disk/by-id/scsi-SATA_ST3160827AS_3MT003CE-part2' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..  \|/-\|/finished
>Reiserfs super block in block 16 on 0x806 of format 3.6 with standard journal
>Blocks (total/free): 3931888/1628661 by 4096 bytes
>Filesystem is clean
>Replaying journal: Replaying journal: Done.
>Reiserfs journal '/dev/disk/by-id/scsi-SATA_ST3160827AS_3MT003CE-part6' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..  \|/-\|/-\finished
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>loop: module loaded
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>REISERFS (device sda7): found reiserfs format "3.6" with standard journal
>REISERFS (device sda7): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda7): checking transaction log (sda7)
>REISERFS (device sda7): Using r5 hash to sort names
>/dev/sda7 on /abuild type reiserfs (rw)
>REISERFS (device sda8): found reiserfs format "3.6" with standard journal
>REISERFS (device sda8): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda8): checking transaction log (sda8)
>REISERFS (device sda8): Using r5 hash to sort names
>/dev/sda8 on /home type reiserfs (rw)
>REISERFS (device sda3): found reiserfs format "3.6" with standard journal
>REISERFS (device sda3): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda3): checking transaction log (sda3)
>REISERFS (device sda3): Using r5 hash to sort names
>/dev/sda3 on /suse100 type reiserfs (rw)
>REISERFS (device sda2): found reiserfs format "3.6" with standard journal
>REISERFS (device sda2): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda2): checking transaction log (sda2)
>REISERFS (device sda2): Using r5 hash to sort names
>/dev/sda2 on /suse101 type reiserfs (rw)
>REISERFS (device sda6): found reiserfs format "3.6" with standard journal
>REISERFS (device sda6): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda6): checking transaction log (sda6)
>REISERFS (device sda6): Using r5 hash to sort names
>/dev/sda6 on /suse102 type reiserfs (rw)
>doneMounting securityfs on /sys/kernel/security done
>AppArmor: AppArmor initialized
>audit(1193224995.073:2):  type=1505 info="AppArmor initialized" pid=1924
>Loading AppArmor module done
>Loading AppArmor profiles done
>Setting up the hardware clockdone
>Creating /var/log/boot.msg
>doneSetting up hostname 'hammer'done
>Setting up NIS domainname 'suse.cz'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>Can't determine current runlevel
>done
>Activating remaining swap-devices in /etc/fstab...
>doneConfiguring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>Configured serial ports
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>System Boot Control: The system has been set up
>Skipped features: boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>doneINIT: Entering runlevel: 5
>Boot logging started on /dev/tty1(/dev/console) at Wed Oct 24 13:23:20 2007
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>Starting resource managerdone
>Starting D-Bus daemondone
>Starting syslog servicesdone
>Starting acpid .done
>Starting ConsoleKitdone
>Starting HAL daemondone
>Loading CPUFreq modulespowernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)
>powernow-k8: Too many lo freq table entries
>powernow-k8: BIOS error: PSB table is not v1.4
> (CPUFreq not supported)
>Starting service gdmdone
>Setting up network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>done    eth0      device: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
>    eth0      (DHCP) . IP/Netmask: 10.20.1.86 / 255.255.248.0 ('hammer') 
>doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
>Starting RPC portmap daemondone
>Starting NFS client services: sm-notifyBackgrounding to notify hosts...
> idmapdMount CIFS File Systems unused
>done
>Starting auditd done
>Loading keymap i386/qwertz/cz-us-qwertz.map.gz
>doneLoading compose table latin2done
>Start Unicode mode
>doneLoading console font lat2-16.psfu  -m trivial G0:loadable
>doneStarting service gdmdone
>Starting irqbalance unused
>Starting Avahi daemondone
>Try to get initial date and time via NTP from ntp.suse.czdone
>Starting network time protocol daemon (NTPD)done
>Starting cupsddone
>Starting Avahi DNS Configuration daemondone
>Starting powersaved: done
>Starting mail service (Postfix)Starting Name Service Cache Daemondone
>Initializing random number generatordone
>done
>Starting SSH daemondone
>Starting CRON daemondone
>Starting smartd done
>Starting INET services. (xinetd)done
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: smbfs irq_balancer splash
>general protection fault: 0000 [1] SMP 
>last sysfs file: /devices/pci0000:00/0000:00:00.0/resource
>
>Entering kdb (current=0xffff81003448e0c0, pid 3741) on processor 0 Oops: <NULL>
>due to oops @ 0xffffffff881f11a2
>     r15 = 0x0000000000000000      r14 = 0x0000000000000000 
>     r13 = 0xffff81003e3ab710      r12 = 0xffff81003cc42000 
>     rbp = 0xffff81003791e000      rbx = 0xffff81003d7322a8 
>     r11 = 0xffffffff80382694      r10 = 0xffff8100344f9bf8 
>      r9 = 0xffff81003d780ce0       r8 = 0x0000000000000000 
>     rax = 0x0000000000000001      rcx = 0x000000000000003f 
>     rdx = 0xffffffff881fb220      rsi = 0xffff81003d7d2948 
>     rdi = 0x6b6b6b6b6b6b6b6b orig_rax = 0xffffffffffffffff 
>     rip = 0xffffffff881f11a2       cs = 0x0000000000000010 
>  eflags = 0x0000000000010202      rsp = 0xffff8100344f9cd0 
>      ss = 0x0000000000000018 &regs = 0xffff8100344f9c38
>[0]kdb> c [0]kdb> bt
>Stack traceback for pid 3741
>0xffff81003448e0c0     3741     3740  1    0   R  0xffff81003448e390 *usbhid-ups
>rsp                rip                Function (args)
>0xffff8100344f9cb8 0xffffffff881f11a2 [usbhid]usbhid_close (0x6b6b6b6b6b6b6b6b)
>kdb_bb: address 0xffff81003791e030 not recognised
>Using old style backtrace, unreliable with no arguments
>rsp                rip                Function (args)
>0xffff8100344f9c68 0xffffffff80382694 class_create_release
>0xffff8100344f9cb8 0xffffffff881f11a2 [usbhid]usbhid_close
>0xffff8100344f9ce0 0xffffffff881f2fe2 [usbhid]hiddev_disconnect+0x51
>0xffff8100344f9cf0 0xffffffff881f12cb [usbhid]hid_disconnect+0x99
>0xffff8100344f9d20 0xffffffff880ecaa0 [usbcore]usb_unbind_interface+0x3c
>0xffff8100344f9d40 0xffffffff8038154e __device_release_driver+0x91
>0xffff8100344f9d60 0xffffffff80381980 device_release_driver+0x42
>0xffff8100344f9d80 0xffffffff880ec612 [usbcore]usb_driver_release_interface+0x44
>0xffff8100344f9da0 0xffffffff880f04ba [usbcore]proc_ioctl+0xfd
>0xffff8100344f9de0 0xffffffff880f060e [usbcore]proc_ioctl_default+0x2b
>0xffff8100344f9e10 0xffffffff880f1a82 [usbcore]usbdev_ioctl+0x1231
>0xffff8100344f9ea0 0xffffffff880f0851 [usbcore]usbdev_ioctl
>0xffff8100344f9ed0 0xffffffff802997d9 do_ioctl+0x9d
>0xffff8100344f9f00 0xffffffff80299a3f vfs_ioctl+0x24d
>0xffff8100344f9f40 0xffffffff80299ab1 sys_ioctl+0x59
>[0]more>

Actions: View

Attachments on bug 335676: 179712 | 180216 | 180490 | 180616