Attachment 186372 Details for Bug 346159

boot.msg

boot.msg.txt (text/plain), 45.31 KB, created by Stefan Scheler on 2007-12-07 13:12:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stefan Scheler

Created: 2007-12-07 13:12:55 UTC

Size: 45.31 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.22.13-0.3-bigsmp
>Loaded 26188 symbols from /boot/System.map-2.6.22.13-0.3-bigsmp.
>Symbols match kernel version 2.6.22.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.22.13-0.3-bigsmp (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/11/19 15:02:58 UTC
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
><4> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
><4> BIOS-e820: 0000000000100000 - 00000000dfec4c00 (usable)
><4> BIOS-e820: 00000000dfec4c00 - 00000000e0000000 (reserved)
><4> BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
><4> BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
><4> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
><4> BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
><4> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
><4> BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
><5>3712MB HIGHMEM available.
><5>896MB LOWMEM available.
><4>NX (Execute Disable) protection: active
><7>Entering add_active_range(0, 0, 1179648) 0 entries of 256 used
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  Normal       4096 ->   229376
><4>  HighMem    229376 ->  1179648
><4>early_node_map[1] active PFN ranges
><4>    0:        0 ->  1179648
><7>On node 0 totalpages: 1179648
><7>  DMA zone: 32 pages used for memmap
><7>  DMA zone: 0 pages reserved
><7>  DMA zone: 4064 pages, LIFO batch:0
><7>  Normal zone: 1760 pages used for memmap
><7>  Normal zone: 223520 pages, LIFO batch:31
><7>  HighMem zone: 7424 pages used for memmap
><7>  HighMem zone: 942848 pages, LIFO batch:31
><6>DMI 2.4 present.
><6>Using APIC driver default
><4>ACPI: RSDP 000FBB50, 0024 (r2 DELL  )
><4>ACPI: XSDT DFEC6600, 0064 (r1 DELL    M08     27D70A18 ASL        61)
><4>ACPI: FACP DFEC649C, 00F4 (r4 DELL    M08     27D70A18 ASL        61)
><4>ACPI: DSDT DFEC6C00, 5718 (r2 INT430 SYSFexxx     1001 INTL 20050624)
><4>ACPI: FACS DFED5400, 0040
><4>ACPI: HPET DFEC6700, 0038 (r1 DELL    M08            1 ASL        61)
><4>ACPI: APIC DFEC6800, 0068 (r1 DELL    M08     27D70A18 ASL        47)
><4>ACPI: ASF! DFEC6400, 007E (r32 DELL    M08     27D70A18 ASL        61)
><4>ACPI: MCFG DFEC67C0, 003E (r16 DELL    M08     27D70A18 ASL        61)
><4>ACPI: SLIC DFEC689C, 0176 (r1 DELL    M08     27D70A18 ASL        61)
><4>ACPI: TCPA DFEC6B00, 0032 (r1                        0 ASL         0)
><4>ACPI: SSDT DFEC4DC0, 04CC (r1  PmRef    CpuPm     3000 INTL 20050624)
><6>ACPI: PM-Timer IO Port: 0x1008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><4>Processor #0 6:15 APIC version 20
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
><4>Processor #1 6:15 APIC version 20
><6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><4>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
><6>ACPI: HPET id: 0x8086a201 base: 0xfed00000
><6>Using ACPI (MADT) for SMP configuration information
><4>Allocating PCI resources starting at e2000000 (gap: e0000000:14000000)
><4>Built 1 zonelists.  Total pages: 1170432
><5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 vga=0x346 resume=/dev/sda2 splash=silent
><6>bootsplash: silent mode.
><7>mapped APIC to ffffd000 (fee00000)
><7>mapped IOAPIC to ffffc000 (fec00000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 16384 bytes)
><4>Detected 2193.989 MHz processor.
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 4146288k/4718592k available (1859k kernel code, 45416k reserved, 902k data, 232k init, 3275536k highmem)
><4>virtual kernel memory layout:
><4>    fixmap  : 0xff8b4000 - 0xfffff000   (7468 kB)
><4>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
><4>    vmalloc : 0xf8800000 - 0xff5fe000   ( 109 MB)
><4>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
><4>      .init : 0xc03ba000 - 0xc03f4000   ( 232 kB)
><4>      .data : 0xc02d0c81 - 0xc03b26d8   ( 902 kB)
><4>      .text : 0xc0100000 - 0xc02d0c81   (1859 kB)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
><6>hpet0: 3 64-bit timers, 14318180 Hz
><4>Calibrating delay using timer specific routine.. 4392.61 BogoMIPS (lpj=8785221)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
><4>monitor/mwait feature present.
><4>using mwait in idle threads.
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><7>CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><4>Compat vDSO mapped to ffffe000.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 4058k freed
><6>ACPI: Core revision 20070126
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 766 Objects with 97 Devices 246 Methods 15 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0002) - 13 Objects with 0 Devices 4 Methods 0 Regions
><4> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><4>CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
><6>SMP alternatives: switching to SMP code
><4>Booting processor 1/1 eip 3000
><6>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 4387.83 BogoMIPS (lpj=8775664)
><7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
><4>monitor/mwait feature present.
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><7>CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#1.
><4>CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
><6>Total of 2 processors activated (8780.44 BogoMIPS).
><4>ENABLING IO-APIC IRQs
><6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
><6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
><6>Brought up 2 CPUs
><4>migration_cost=21
><6>Booting paravirtualized kernel on bare hardware
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: Using MMCONFIG
><4>Setting up standard PCI resources
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 3 Runtime GPEs in this block
><7>ACPI: EC: Look up EC in DSDT
><4>ACPI: System BIOS is requesting _OSI(Linux)
><4>ACPI: Please test with "acpi_osi=!Linux"
><4>Please send dmidecode to linux-acpi@vger.kernel.org
><4>Completing Region/Field/Buffer/Package initialization:..........................................................................
><4>Initialized 10/15 Regions 17/22 Fields 30/32 Buffers 17/28 Packages (788 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:...ACPI: SSDT DFED5480, 0043 (r1  LMPWR  DELLLOM     1001 INTL 20050624)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0028) - 1 Objects with 0 Devices 1 Methods 0 Regions
><4>.
><4>Executed 4 _INI methods requiring 0 _STA executions (examined 102 objects)
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *3
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 13 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PnPBIOS: Disabled by ACPI PNP
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>ACPI: RTC can wake from S4
><6>pnp: 00:05: ioport range 0xc80-0xcaf has been reserved
><6>pnp: 00:05: ioport range 0xcc0-0xcff could not be reserved
><6>pnp: 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
><6>pnp: 00:09: ioport range 0xcb0-0xcbb has been reserved
><6>pnp: 00:09: iomem range 0xfed40000-0xfed44fff could not be reserved
><6>pnp: 00:0a: ioport range 0x900-0x97f has been reserved
><6>pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
><6>pnp: 00:0a: ioport range 0x1000-0x1005 has been reserved
><6>pnp: 00:0a: ioport range 0x1008-0x100f has been reserved
><6>pnp: 00:0b: ioport range 0xf400-0xf4fe has been reserved
><6>pnp: 00:0b: ioport range 0x1006-0x1007 has been reserved
><6>pnp: 00:0b: ioport range 0x100a-0x1059 could not be reserved
><6>pnp: 00:0b: ioport range 0x1080-0x10bf has been reserved
><6>pnp: 00:0b: ioport range 0x10c0-0x10df has been reserved
><6>pnp: 00:0b: ioport range 0x1010-0x102f has been reserved
><6>pnp: 00:0b: ioport range 0x809-0x809 has been reserved
><6>pnp: 00:0c: iomem range 0x0-0x9efff could not be reserved
><6>pnp: 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
><6>pnp: 00:0c: iomem range 0xc0000-0xcffff could not be reserved
><6>pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
><6>Time: tsc clocksource has been installed.
><6>Switched to NOHz mode on CPU #0
><6>Switched to NOHz mode on CPU #1
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: d000-dfff
><6>  MEM window: fa000000-feafffff
><6>  PREFETCH window: e0000000-efffffff
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.1
><6>  IO window: disabled.
><6>  MEM window: f9f00000-f9ffffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.3
><6>  IO window: c000-cfff
><6>  MEM window: f9c00000-f9efffff
><6>  PREFETCH window: f0000000-f01fffff
><6>PCI: Bridge: 0000:00:1c.5
><6>  IO window: disabled.
><6>  MEM window: f9b00000-f9bfffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: disabled.
><6>  MEM window: f9a00000-f9afffff
><6>  PREFETCH window: disabled.
><6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:1c.5 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
><4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>Machine check exception polling timer started.
><6>audit: initializing netlink socket (disabled)
><5>audit(1197033523.628:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>Boot video device is 0000:01:00.0
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:01.0:pcie00]
><7>Allocate Port Service[0000:00:01.0:pcie02]
><7>Allocate Port Service[0000:00:01.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><7>Allocate Port Service[0000:00:1c.0:pcie02]
><7>Allocate Port Service[0000:00:1c.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.1:pcie00]
><7>Allocate Port Service[0000:00:1c.1:pcie02]
><7>Allocate Port Service[0000:00:1c.1:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.3:pcie00]
><7>Allocate Port Service[0000:00:1c.3:pcie02]
><7>Allocate Port Service[0000:00:1c.3:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.5 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.5:pcie00]
><7>Allocate Port Service[0000:00:1c.5:pcie02]
><7>Allocate Port Service[0000:00:1c.5:pcie03]
><6>vesafb: framebuffer at 0xfb000000, mapped to 0xf8880000, using 14336k, total 14336k
><6>vesafb: mode is 1600x1200x16, linelength=3200, pages=1
><6>vesafb: protected mode interface info at c000:ba40
><6>vesafb: pmi: set display start = c00cbaa3, set palette = c00cbafe
><6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...
><6>bootsplash: silentjpeg size 103127 bytes
><6>bootsplash: ...found (1600x1200, 39122 bytes, v3).
><4>Console: switching to colour frame buffer device 196x71
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><7>hpet_resources: 0xfed00000 is busy
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>Floppy drive(s): fd0 is 1.44M
><4>floppy0: no floppy controllers found
><6>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><6>input: PC Speaker as /class/input/input1
><6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa44713/0x200000
><6>input: SynPS/2 Synaptics TouchPad as /class/input/input2
><6>NET: Registered protocol family 1
><4>Using IPI No-Shortcut mode
><6>Freeing unused kernel memory: 232k freed
><4>ACPI: SSDT DFEC58F6, 0286 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 00E9) - 6 Objects with 0 Devices 4 Methods 0 Regions
><4>ACPI: SSDT DFEC528C, 05E5 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 00EA) - 1 Objects with 0 Devices 1 Methods 0 Regions
><7>Monitor-Mwait will be used to enter C-1 state
><7>Monitor-Mwait will be used to enter C-2 state
><7>Monitor-Mwait will be used to enter C-3 state
><6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><4>ACPI: SSDT DFEC5B7C, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 00EE) - 4 Objects with 0 Devices 4 Methods 0 Regions
><4>ACPI: SSDT DFEC5871, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 00EF) - 1 Objects with 0 Devices 1 Methods 0 Regions
><6>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
><6>ACPI: Processor [CPU1] (supports 8 throttling states)
><4>Marking TSC unstable due to: possible TSC halt in C2.
><6>ACPI: Thermal Zone [THM] (52 C)
><6>Time: hpet clocksource has been installed.
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><7>ata_piix 0000:00:1f.1: version 2.11
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
><6>scsi0 : ata_piix
><6>scsi1 : ata_piix
><6>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00016fa0 irq 14
><6>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00016fa8 irq 15
><4>Clocksource tsc unstable (delta = -472879039 ns)
><6>ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D200, max UDMA/33
><6>ata1.00: configured for UDMA/33
><7>ata2: port disabled. ignoring.
><5>scsi 0:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632H D200 PQ: 0 ANSI: 5
><6>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
><6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>scsi2 : ata_piix
><6>scsi3 : ata_piix
><6>ata3: SATA max UDMA/133 cmd 0x00016eb0 ctl 0x00016eba bmdma 0x00016ee0 irq 17
><6>ata4: SATA max UDMA/133 cmd 0x00016ec0 ctl 0x00016eca bmdma 0x00016ee8 irq 17
><6>ata3.00: ATA-8: FUJITSU MHW2120BJ G2, 0085001A, max UDMA/100
><6>ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32)
><6>ata3.00: configured for UDMA/100
><5>scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHW2120B 0085 PQ: 0 ANSI: 5
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
><6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
><6>USB Universal Host Controller Interface driver v3.0
><6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:1a.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
><6>ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfed1c400
><6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: EHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.22.13-0.3-bigsmp ehci_hcd
><6>usb usb1: SerialNumber: 0000:00:1a.7
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 4 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb2: new device found, idVendor=0000, idProduct=0000
><6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: EHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.22.13-0.3-bigsmp ehci_hcd
><6>usb usb2: SerialNumber: 0000:00:1d.7
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 6 ports detected
><6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
><6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
><5>sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda:<6>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
><4> sda1 sda2 sda3
><6>usb usb3: new device found, idVendor=0000, idProduct=0000
><6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: UHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.22.13-0.3-bigsmp uhci_hcd
><5>sd 2:0:0:0: [sda] Attached SCSI disk
><6>usb usb3: SerialNumber: 0000:00:1a.0
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
><6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
><6>usb usb4: new device found, idVendor=0000, idProduct=0000
><6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: UHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.22.13-0.3-bigsmp uhci_hcd
><6>usb usb4: SerialNumber: 0000:00:1a.1
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
><6>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
><6>usb 3-1: new full speed USB device using uhci_hcd and address 2
><6>usb usb5: new device found, idVendor=0000, idProduct=0000
><6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb5: Product: UHCI Host Controller
><6>usb usb5: Manufacturer: Linux 2.6.22.13-0.3-bigsmp uhci_hcd
><6>usb usb5: SerialNumber: 0000:00:1d.0
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>usb 3-1: new device found, idVendor=0b97, idProduct=7761
><6>usb 3-1: new device strings: Mfr=0, Product=0, SerialNumber=0
><6>usb 3-1: configuration #1 chosen from 1 choice
><6>hub 3-1:1.0: USB hub found
><6>hub 3-1:1.0: 4 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
><6>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
><6>usb usb6: new device found, idVendor=0000, idProduct=0000
><6>usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb6: Product: UHCI Host Controller
><6>usb usb6: Manufacturer: Linux 2.6.22.13-0.3-bigsmp uhci_hcd
><6>usb usb6: SerialNumber: 0000:00:1d.1
><6>usb usb6: configuration #1 chosen from 1 choice
><6>hub 6-0:1.0: USB hub found
><6>hub 6-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
><6>uhci_hcd 0000:00:1d.2: irq 19, io base 0x00006f40
><6>usb usb7: new device found, idVendor=0000, idProduct=0000
><6>usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb7: Product: UHCI Host Controller
><6>usb usb7: Manufacturer: Linux 2.6.22.13-0.3-bigsmp uhci_hcd
><6>usb usb7: SerialNumber: 0000:00:1d.2
><6>usb 5-2: new full speed USB device using uhci_hcd and address 2
><6>usb usb7: configuration #1 chosen from 1 choice
><6>hub 7-0:1.0: USB hub found
><6>hub 7-0:1.0: 2 ports detected
><4>swsusp: Basic memory bitmaps created
><4>swsusp: Basic memory bitmaps freed
><6>usb 5-2: new device found, idVendor=046d, idProduct=c525
><6>usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 5-2: Product: USB Receiver
><6>usb 5-2: Manufacturer: Logitech
><6>usb 5-2: configuration #1 chosen from 1 choice
><4>Attempting manual resume
><6>usb 3-1.2: new full speed USB device using uhci_hcd and address 3
><6>usb 3-1.2: new device found, idVendor=0b97, idProduct=7772
><6>usb 3-1.2: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 3-1.2: Product: O2Micro CCID SC Reader
><6>usb 3-1.2: Manufacturer: O2
><6>usb 3-1.2: configuration #1 chosen from 1 choice
><6>usbcore: registered new interface driver hiddev
><6>input: Logitech USB Receiver as /class/input/input3
><6>input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2
><6>input: Logitech USB Receiver as /class/input/input4
><6>input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><5>scsi 0:0:0:0: Attached scsi generic sg0 type 5
><5>sd 2:0:0:0: Attached scsi generic sg1 type 0
><6>tg3.c:v3.77 (May 31, 2007)
><6>ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:09:00.0 to 64
><6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
><6>eth0: Tigon3 [partno(BCM95756m) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:23:23:4b:83
><6>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
><6>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
><4>rtc_cmos: probe of 00:03 failed with error -16
><7>ieee80211_crypt: registered algorithm 'NULL'
><6>ieee80211: 802.11 data/management/control stack, git-1.1.13
><6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
><6>ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2dmpr
><6>ipw3945: Copyright(c) 2003-2006 Intel Corporation
><6>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:0c:00.0 to 64
><6>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
><6>ACPI: AC Adapter [AC] (on-line)
><6>ACPI: Battery Slot [BAT0] (battery present)
><6>input: Lid Switch as /class/input/input5
><6>ACPI: Lid Switch [LID]
><6>input: Power Button (CM) as /class/input/input6
><6>ACPI: ACPI Dock Station Driver 
><6>ACPI: Power Button (CM) [PBTN]
><6>input: Sleep Button (CM) as /class/input/input7
><6>ACPI: Sleep Button (CM) [SBTN]
><6>sdhci: Secure Digital Host Controller Interface driver
><6>sdhci: Copyright(c) Pierre Ossman
><6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
><6>sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22)
><6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
><6>ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 22
><6>mmc0: SDHCI at 0xf9aff400 irq 22 DMA
><6>Linux agpgart interface v0.102 (c) Dave Jones
><7>ALSA sound/pci/hda/hda_codec.c:2333: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2337:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2341:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2349:    inputs: mic=0xb, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0
><7>ALSA sound/pci/hda/patch_sigmatel.c:1304: dac_nids=1 (0x10/0x0/0x0/0x0/0x0)
><6>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18
><6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[f9aff800-f9afffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
><4>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 0:0:0:0: Attached scsi CD-ROM sr0
><4>nvidia: module license 'NVIDIA' taints kernel.
><6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:01:00.0 to 64
><4>NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
><6>Adding 2104504k swap on /dev/sda2.  Priority:-1 extents:1 across:2104504k
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[434fc0003d0aa470]
><6>ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
><6>eth1 renamed to wlan0
><6>udev: renamed network interface eth1 to wlan0
><6>loop: module loaded
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda3, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>AppArmor: AppArmor initialized
><5>audit(1197033549.073:2):  type=1505 info="AppArmor initialized" pid=2227
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Fri Dec  7 13:18:48 2007
>
>Creating device nodes with udev
>Trying manual resume from /dev/sda2
>Invoking userspace resume from /dev/sda2
>resume: Could not stat configuration file
>resume: libgcrypt version: 1.2.4
>Trying manual resume from /dev/sda2
>Invoking in-kernel resume from /dev/sda2
>Waiting for device /dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 to appear:  ok
>fsck 1.40.2 (12-Jul-2007)
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 
>/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1: recovering journal
>/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1: Clearing orphaned inode 1791013 (uid=1000, gid=100, mode=0100600, size=2048)
>/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1: Clearing orphaned inode 1791022 (uid=1000, gid=100, mode=0100600, size=2048)
>/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1: Clearing orphaned inode 1789477 (uid=1000, gid=100, mode=0100600, size=0)
>/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1: Clearing orphaned inode 1790864 (uid=0, gid=0, mode=0100600, size=217016)
>/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1: clean, 139156/2626560 files, 970968/5242880 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri Dec  7 14:18:59 2007
>
>done
>Starting udevd udevd-event[1930]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it
>
>done
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>donemount: according to mtab, /dev/sda1 is already mounted on /
>
>Activating device mapper...
>done
>Checking file systems...
>fsck 1.40.2 (12-Jul-2007)
>/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part3: recovering journal
>/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part3: clean, 15162/11780096 files, 1497295/23535225 blocks
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda3 on /home type ext3 (rw,acl,user_xattr)
>doneSetting up the hardware clock<notice>killproc: kill(1276,29)
>Mounting securityfs on /sys/kernel/security done
>Loading AppArmor module done
>Loading AppArmor profiles done
>Activating remaining swap-devices in /etc/fstab...
>doneCreating /var/log/boot.msg
>doneConfiguring serial ports...
>Configured serial ports
>donedone
>Setting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>Setting up hostname 'ssemobile'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>Can't determine current runlevel
>done
>System Boot Control: The system has been set up
>Skipped features: boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(1276,3)
>
>INIT: Entering runlevel: 5
>
>
>
>Boot logging started on /dev/tty1(/dev/console) at Fri Dec  7 13:19:13 2007
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
><notice> ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/sbin/acpid ]
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
><notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
>acpid: starting up
>
>
>Starting acpid done
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PWD=/ PREVLEVEL=N LINES=71 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
>Starting resource managerdone
>Starting D-Bus daemonStarting irqbalance done
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PWD=/ PREVLEVEL=N LINES=71 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>Unknown username "gdm" in message bus configuration file
>done
>acpid: 2 rules loaded
>
>
>Checking/updating CPU microcode done
>.Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
>done
>Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/consoledone
>Loading CPUFreq modulesdone
>Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
>doneLoading compose table latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>doneStarting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>done
><notice>startproc: execve (/usr/sbin/dhcdbd) [ /usr/sbin/dhcdbd --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd ]
>Initializing random number generatordone
><notice>startproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ]
><notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ]
>Starting the DHCP DBUS Daemondone
>Starting the NetworkManagerDispatcherdone
>Starting the NetworkManagerdone
>Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=71 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
>done
><notice>checkproc: /opt/kde3/bin/kdm 3148
>Starting auditd <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/sbin/auditd ]
>done
>Starting Avahi daemon<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
>..done
>Starting Avahi DNS Configuration daemon<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
>done
>Starting hotkey-setup done
>Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>done
>Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/sbin/portmap ]
>done
>Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
>done
>Starting mail service (Postfix)done
>Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
><notice>checkproc: /opt/kde3/bin/kdm 3148
>done
>Starting powersaved: <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
>done
><notice>killproc: kill(3140,15)
>Starting smartd <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
>done
>Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=196 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x346 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1600x1200.cfg PREVLEVEL=N LINES=71 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120_K30UT7B27FHN-part1 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>done
>Starting Firewall Initialization (phase 2 of 2) done
>done
>Master Resource Control: runlevel 5 has been reached
><notice>killproc: kill(2459,3)

Actions: View

Attachments on bug 346159: 186360 | 186371 | 186372