Attachment 189108 Details for Bug 334005

dmesg from the MSI PR200 laptop (2.6.24-rc6-git7-13-default kernel)

pr200.dmesg (text/plain), 32.59 KB, created by Kevin Ottens on 2008-01-03 08:14:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kevin Ottens

Created: 2008-01-03 08:14:10 UTC

Size: 32.59 KB

patch

obsolete

>Linux version 2.6.24-rc6-git7-13-default (geeko@buildhost) (gcc version 4.3.0 20071129 (experimental) [trunk revision 130511] (SUSE Linux) ) #1 SMP 2008/01/01 21:14:48 UTC
>Command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXE707G37109-part6 vga=0x367 resume=/dev/sda5 splash=silent
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
> BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
> BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
> BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
> BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>Entering add_active_range(0, 0, 154) 0 entries of 3200 used
>Entering add_active_range(0, 256, 522144) 1 entries of 3200 used
>end_pfn_map = 1043969
>DMI present.
>ACPI: RSDP 000F8850, 0014 (r0 ACPIAM)
>ACPI: RSDT 7F7A0000, 0044 (r1 MSI_NB MEGABOOK 20070716 MSFT       97)
>ACPI: FACP 7F7A0200, 0084 (r2 071607 FACP1546 20070716 MSFT       97)
>ACPI: DSDT 7F7A05B0, 5B43 (r1  A1221 A1221000        0 INTL 20051117)
>ACPI: FACS 7F7AE000, 0040
>ACPI: APIC 7F7A0390, 005C (r1 071607 APIC1546 20070716 MSFT       97)
>ACPI: MCFG 7F7A03F0, 003C (r1 071607 OEMMCFG  20070716 MSFT       97)
>ACPI: SLIC 7F7A0430, 0176 (r1 MSI_NB MEGABOOK 20070716 MSFT       97)
>ACPI: OEMB 7F7AE040, 0071 (r1 071607 OEMB1546 20070716 MSFT       97)
>ACPI: HPET 7F7A6100, 0038 (r1 071607 OEMHPET  20070716 MSFT       97)
>ACPI: GSCI 7F7AE0C0, 2024 (r1 071607 GMCHSCI  20070716 MSFT       97)
>ACPI: SSDT 7F7B09B0, 04E6 (r1  PmRef    CpuPm     3000 INTL 20051117)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007f7a0000
>Entering add_active_range(0, 0, 154) 0 entries of 3200 used
>Entering add_active_range(0, 256, 522144) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007f7a0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      154
>    0:      256 ->   522144
>On node 0 totalpages: 522042
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1430 pages reserved
>  DMA zone: 2508 pages, LIFO batch:0
>  DMA32 zone: 7082 pages used for memmap
>  DMA32 zone: 510966 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009a000 - 000000000009b000
>swsusp: Registered nosave memory region: 000000000009b000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 46944 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513474
>Policy zone: DMA32
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXE707G37109-part6 vga=0x367 resume=/dev/sda5 splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>hpet clockevent registered
>TSC calibrated against HPET
>time.c: Detected 1994.999 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2049236k/2088576k available (2190k kernel code, 38932k reserved, 993k data, 332k init)
>Calibrating delay using timer specific routine.. 3995.06 BogoMIPS (lpj=7990136)
>Security Framework initialized
>AppArmor: AppArmor initialized
>AppArmor: Unable to log event (1505) to audit subsys
>AppArmor: Registered secondary security module name="capability"
>AppArmor: Unable to log event (1505) to audit subsys
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>Unpacking initramfs... done
>Freeing initrd memory: 4420k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 902 Objects with 71 Devices 211 Methods 32 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 14 Objects with 0 Devices 4 Methods 0 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>APIC timer calibration result 12468743
>Detected 12.468 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.01 BogoMIPS (lpj=7980035)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>net_namespace: 120 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 3 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:.................................................................................................................................
>Initialized 28/32 Regions 26/26 Fields 40/41 Buffers 35/36 Packages (925 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:.
>Executed 1 _INI methods requiring 0 _STA executions (examined 78 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>Error attaching device data
>Error attaching device data
>ACPI Error (evregion-0316): No handler for Region [EC__] (ffff81007c64efa0) [EmbeddedControl] [20070126]
>ACPI Error (exfldio-0289): Region EmbeddedControl(3) has no handler [20070126]
>ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node ffff81007c6507f0), AE_NOT_EXIST
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:08: ioport range 0x400-0x41f has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x500-0x53f has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
>system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
>system 00:0c: iomem range 0xc0000-0xcffff has been reserved
>system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0c: iomem range 0x100000-0x7f7fffff could not be reserved
>system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: e000-efff
>  MEM window: fe000000-febfffff
>  PREFETCH window: fa000000-fcffffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: d000-dfff
>  MEM window: fdf00000-fdffffff
>  PREFETCH window: 80000000-800fffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: fde00000-fdefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: c000-cfff
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: fdc00000-fdcfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1199348616.656:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000900000, using 7616k, total 7616k
>vesafb: mode is 1280x800x16, linelength=2560, pages=2
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 88239 bytes
>bootsplash: ...found (1280x800, 31936 bytes, v3).
>Console: switching to colour frame buffer device 156x46
>fb0: VESA VGA frame buffer device
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>input: PC Speaker as /devices/platform/pcspkr/input/input1
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
>cpuidle: using governor ladder
>cpuidle: using governor menu
>NET: Registered protocol family 1
>registered taskstats version 1
>Freeing unused kernel memory: 332k freed
>ACPI: SSDT 7F7B01C0, 0297 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
>Parsing all Control Methods:
>Table [SSDT](id 00F8) - 6 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: SSDT 7F7B04F0, 04B6 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
>Parsing all Control Methods:
>Table [SSDT](id 00F9) - 1 Objects with 0 Devices 1 Methods 0 Regions
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: SSDT 7F7B00F0, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
>Parsing all Control Methods:
>Table [SSDT](id 00FE) - 4 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: SSDT 7F7B0460, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
>Parsing all Control Methods:
>Table [SSDT](id 00FF) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>Marking TSC unstable due to TSC halts in idle
>Time: hpet clocksource has been installed.
>ACPI: Thermal Zone [THRM] (36 C)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
>Clocksource tsc unstable (delta = -228561595 ns)
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfdbff800 port 0xfdbff900 irq 4347
>ata2: SATA max UDMA/133 abar m2048@0xfdbff800 port 0xfdbff980 irq 4347
>ata3: SATA max UDMA/133 abar m2048@0xfdbff800 port 0xfdbffa00 irq 4347
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: WDC WD1600BEVS-22RST0, 04.01G04, max UDMA/133
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEVS-2 04.0 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WA03, max UDMA/33
>ata4.00: configured for UDMA/33
>ata5: port disabled. ignoring.
>scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WA03 PQ: 0 ANSI: 5
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 <<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
> sda5<6>usb usb1: Manufacturer: Linux 2.6.24-rc6-git7-13-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
> sda6<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
> sda7 >
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.24-rc6-git7-13-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ac00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.24-rc6-git7-13-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.24-rc6-git7-13-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.24-rc6-git7-13-default uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdbff000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: EHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.24-rc6-git7-13-default ehci_hcd
>usb usb6: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>usb 5-1: new full speed USB device using uhci_hcd and address 2
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdbff400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.24-rc6-git7-13-default ehci_hcd
>usb usb7: SerialNumber: 0000:00:1d.7
>swsusp: Marking nosave pages: 000000000009a000 - 0000000000100000
>swsusp: Basic memory bitmaps created
>swsusp: Basic memory bitmaps freed
>Attempting manual resume
>usb 5-1: new full speed USB device using uhci_hcd and address 3
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 5-1: configuration #1 chosen from 1 choice
>usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-1: Product: Fingerprint Sensor   
>usb 5-1: Manufacturer: TouchStrip        
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>input: Power Button (FF) as /devices/virtual/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/virtual/input/input4
>ACPI: Lid Switch [LID0]
>input: Sleep Button (CM) as /devices/virtual/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>input: Power Button (CM) as /devices/virtual/input/input6
>ACPI: Power Button (CM) [PWRB]
>iTCO_vendor_support: vendor-support=0
>r8169 Gigabit Ethernet driver 2.2LK loaded
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>eth0: RTL8168b/8111b at 0xffffc200008c8000, 00:19:db:ed:77:ba, XID 38000000 IRQ 4346
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:01:04.1 [1524:0750] (rev 0)
>ACPI: PCI Interrupt 0000:01:04.1[A] -> GSI 16 (level, low) -> IRQ 16
>mmc0: SDHCI at 0xfdcff400 irq 16 DMA
>sdhci: SDHCI controller found at 0000:01:04.3 [1524:0751] (rev 0)
>ACPI: PCI Interrupt 0000:01:04.3[A] -> GSI 16 (level, low) -> IRQ 16
>sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
>mmc1: SDHCI at 0xfdcffc00 irq 16 DMA
>ACPI: AC Adapter [ADP1] (on-line)
>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.17kds
>iwl4965: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>iwl4965: Radio disabled by HW RF Kill switch
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2760: autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2764:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2768:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2776:    inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/hda_generic.c:679: hda_generic: no proper input path found
>ALSA sound/pci/hda/hda_generic.c:427: hda_generic: no proper output path found
>ALSA sound/pci/hda/hda_generic.c:1022: hda_generic: no PCM found
>ALSA sound/pci/hda/patch_si3054.c:238: si3054: cannot initialize. EXT MID = 0000
>ALSA sound/pci/hda/patch_si3054.c:250: Link Frame Detect(FDT) is not ready (line status: 0000)
>Adding 2104472k swap on /dev/sda5.  Priority:-1 extents:1 across:2104472k
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>r8169: eth0: link up
>r8169: eth0: link up
>audit(1199345041.526:2): audit_backlog_limit=320 old=64 by auid=4294967295 res=1
>audit(1199345041.543:3): audit_pid=2319 old=0 by auid=4294967295
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>NET: Registered protocol family 17
>bootsplash: status on console 0 changed to on
>martian source 255.255.255.255 from 192.168.1.1, on dev eth0
>ll header: ff:ff:ff:ff:ff:ff:00:14:bf:a5:ab:9f:08:00
>martian source 255.255.255.255 from 192.168.1.1, on dev eth0
>ll header: ff:ff:ff:ff:ff:ff:00:14:bf:a5:ab:9f:08:00
>eth0: no IPv6 routers present
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=53709 DF PROTO=TCP SPT=16449 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080AFFFF224B0000000001030307) 
>NET: Registered protocol family 4
>NET: Registered protocol family 3
>NET: Registered protocol family 5
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=44462 DF PROTO=TCP SPT=16450 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080AFFFF24080000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=55217 DF PROTO=TCP SPT=15186 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0003CEF80000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=18638 DF PROTO=TCP SPT=15189 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0003D4500000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=3387 DF PROTO=TCP SPT=15191 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0003D58B0000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=42823 DF PROTO=TCP SPT=15193 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0003D7120000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=43020 DF PROTO=TCP SPT=15195 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0003D7370000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=46595 DF PROTO=TCP SPT=15218 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0003E2910000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=27068 DF PROTO=TCP SPT=15275 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0003F68F0000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=29206 DF PROTO=TCP SPT=15328 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A000409CA0000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=16399 DF PROTO=TCP SPT=15388 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A00041DC50000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=63551 DF PROTO=TCP SPT=15444 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A000431320000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=8999 DF PROTO=TCP SPT=15490 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A000444260000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=64763 DF PROTO=TCP SPT=15551 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0004586B0000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=47 DF PROTO=TCP SPT=15605 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A00046DFD0000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=7768 DF PROTO=TCP SPT=15658 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A00047F760000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=3901 DF PROTO=TCP SPT=15710 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A000492ED0000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=55126 DF PROTO=TCP SPT=28177 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0004A6470000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=53397 DF PROTO=TCP SPT=28241 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0004BA730000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=6289 DF PROTO=TCP SPT=28300 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0004CCEC0000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=8753 DF PROTO=TCP SPT=28378 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0004E2A00000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=64341 DF PROTO=TCP SPT=28411 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0005376F0000000001030307) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:19:db:ed:77:ba:00:1a:4d:55:3e:b2:08:00 SRC=192.168.1.100 DST=192.168.1.101 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=59297 DF PROTO=TCP SPT=28416 DPT=10245 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A000537D20000000001030307)

Actions: View

Attachments on bug 334005: 189106 | 189108 | 189134 | 189358 | 189806