Attachment 189701 Details for Bug 345866

dmesg with the working kernel

dmesg-2.6.22.13-0.3-default.txt (text/plain), 17.98 KB, created by Henry Laurent on 2008-01-08 09:17:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Henry Laurent

Created: 2008-01-08 09:17:56 UTC

Size: 17.98 KB

patch

obsolete

>Linux version 2.6.22.13-0.3-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/11/19 15:02:58 UTC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fffec00 (ACPI data)
> BIOS-e820: 000000007fffec00 - 000000007ffff000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe710
>Entering add_active_range(0, 0, 524272) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524272
>early_node_map[1] active PFN ranges
>    0:        0 ->   524272
>On node 0 totalpages: 524272
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2303 pages used for memmap
>  HighMem zone: 292593 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FDC80, 0014 (r0 DELL  )
>ACPI: RSDT 000FDC94, 0030 (r1 DELL   PE2500          1 MSFT  100000A)
>ACPI: FACP 000FDCC4, 0074 (r1 DELL   PE2500          1 MSFT  100000A)
>ACPI: DSDT 7FFF0000, 2C0F (r1 DELL   PE2500          1 MSFT  100000A)
>ACPI: FACS 7FFFFC00, 0040
>ACPI: APIC 000FDD38, 0060 (r1 DELL   PE2500          1 MSFT  100000A)
>ACPI: SPCR 000FDD98, 0050 (r1 DELL   PE2500          1 MSFT  100000A)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:11 APIC version 17
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
>Processor #0 6:11 APIC version 17
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15
>ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16])
>IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 2 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7ffff000:7ec01000)
>Built 1 zonelists.  Total pages: 520177
>Kernel command line: root=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 vga=0x317 resume=/dev/sda2 splash=silent
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>mapped IOAPIC to ffffb000 (fec01000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1130.618 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2071004k/2097088k available (1825k kernel code, 24728k reserved, 765k data, 228k init, 1179584k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffdf4000 - 0xfffff000   (2092 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc038e000 - 0xc03c7000   ( 228 kB)
>      .data : 0xc02c844b - 0xc0387964   ( 765 kB)
>      .text : 0xc0100000 - 0xc02c844b   (1825 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2262.26 BogoMIPS (lpj=4524533)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Unpacking initramfs... done
>Freeing initrd memory: 4077k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 366 Objects with 41 Devices 128 Methods 9 Regions
> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>CPU0: Intel(R) Pentium(R) III CPU family      1133MHz stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 1/0 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 2261.05 BogoMIPS (lpj=4522117)
>CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Pentium(R) III CPU family      1133MHz stepping 01
>Total of 2 processors activated (4523.32 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>migration_cost=1240
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfc72e, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 20 to 3F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 1 Runtime GPEs in this block
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 1 Wake, Enabled 0 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:..................................
>Initialized 6/9 Regions 0/0 Fields 17/17 Buffers 11/12 Packages (375 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:
>Executed 0 _INI methods requiring 0 _STA executions (examined 45 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Firmware left 0000:00:04.0 e100 interrupts enabled, disabling
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Root Bridge [PCI1] (0000:01)
>PCI: Probing PCI hardware (bus 01)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I960._PRT]
>ACPI: PCI Root Bridge [PCI2] (0000:03)
>PCI: Probing PCI hardware (bus 03)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 *5 6 7 9 10 11 12 14)
>ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 10 *11 12 14)
>ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 7 *10 11 12 14)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>ACPI: RTC can wake from S4
>pnp: 00:0b: ioport range 0x814-0x85b has been reserved
>pnp: 00:0b: ioport range 0x8a0-0x8af has been reserved
>pnp: 00:0b: ioport range 0xc00-0xcd7 has been reserved
>pnp: 00:0b: ioport range 0xf50-0xf58 has been reserved
>pnp: 00:0c: iomem range 0x0-0x0 could not be reserved
>pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
>pnp: 00:0c: iomem range 0xf0000-0xfffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:01:02.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>audit(1197286360.920:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:0e.0
>vesafb: framebuffer at 0xfd000000, mapped to 0xf8880000, using 6144k, total 8128k
>vesafb: mode is 1024x768x16, linelength=2048, pages=4
>vesafb: protected mode interface info at c000:4a2e
>vesafb: pmi: set display start = c00c4a94, set palette = c00c4aee
>vesafb: pmi: ports = e085 e01f e0b4 e0b8 e018 e014 e0c0 e0c3 e0c1 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 78436 bytes
>bootsplash: ...found (1024x768, 28133 bytes, v3).
>Console: switching to colour frame buffer device 124x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>Switched to NOHz mode on CPU #1
>Switched to NOHz mode on CPU #0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 228k freed
>SCSI subsystem initialized
>libata version 3.00 loaded.
>scsi0 : pata_serverworks
>scsi1 : pata_serverworks
>ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000108b0 irq 14
>ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x000108b8 irq 15
>ata1.00: ATAPI: TOSHIBA DVD-ROM SD-C2502, 1D13, max UDMA/33
>ata1.00: configured for UDMA/33
>scsi 0:0:0:0: CD-ROM            TOSHIBA  DVD-ROM SD-C2502 1D13 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt 0000:01:0e.0[A] -> GSI 24 (level, low) -> IRQ 16
>scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 3960D Ultra160 SCSI adapter>
>        aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
>scsi 2:0:0:0: Direct-Access     SEAGATE  ST336706LC       8A03 PQ: 0 ANSI: 3
>scsi2:A:0:0: Tagged Queuing enabled.  Depth 32
> target2:0:0: Beginning Domain Validation
> target2:0:0: wide asynchronous
> target2:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
> target2:0:0: Ending Domain Validation
>scsi 2:0:1:0: Direct-Access     SEAGATE  ST336706LC       8A03 PQ: 0 ANSI: 3
>scsi2:A:1:0: Tagged Queuing enabled.  Depth 32
> target2:0:1: Beginning Domain Validation
> target2:0:1: wide asynchronous
> target2:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
> target2:0:1: Ending Domain Validation
>scsi 2:0:6:0: Processor         DELL     1x6 U2W SCSI BP  1.29 PQ: 0 ANSI: 2
> target2:0:6: Beginning Domain Validation
> target2:0:6: Ending Domain Validation
>ACPI: PCI Interrupt 0000:01:0e.1[B] -> GSI 23 (level, low) -> IRQ 17
>scsi3 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 3960D Ultra160 SCSI adapter>
>        aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
>
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>sd 2:0:0:0: [sda] 71132959 512-byte hardware sectors (36420 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 9f 00 10 08
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LUSB] -> GSI 10 (level, low) -> IRQ 10
>ohci_hcd 0000:00:0f.2: OHCI Host Controller
>sd 2:0:0:0: [sda] 71132959 512-byte hardware sectors (36420 MB)
>ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 9f 00 10 08
>sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
> sda: sda1 sda2 sda3
>sd 2:0:0:0: [sda] Attached SCSI disk
>sd 2:0:1:0: [sdb] 71132959 512-byte hardware sectors (36420 MB)
>sd 2:0:1:0: [sdb] Write Protect is off
>ohci_hcd 0000:00:0f.2: irq 10, io mem 0xfe200000
>sd 2:0:1:0: [sdb] Mode Sense: 9f 00 10 08
>sd 2:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
>sd 2:0:1:0: [sdb] 71132959 512-byte hardware sectors (36420 MB)
>sd 2:0:1:0: [sdb] Write Protect is off
>sd 2:0:1:0: [sdb] Mode Sense: 9f 00 10 08
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.22.13-0.3-default ohci_hcd
>usb usb1: SerialNumber: 0000:00:0f.2
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>sd 2:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
> sdb: sdb1 sdb2
>sd 2:0:1:0: [sdb] Attached SCSI disk
>swsusp: Basic memory bitmaps created
>swsusp: Basic memory bitmaps freed
>Attempting manual resume
>REISERFS (device sda3): found reiserfs format "3.6" with standard journal
>REISERFS (device sda3): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda3): checking transaction log (sda3)
>REISERFS (device sda3): Using r5 hash to sort names
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:1:0: Attached scsi generic sg2 type 0
>scsi 2:0:6:0: Attached scsi generic sg3 type 3
>piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
>piix4_smbus 0000:00:0f.0: Host SMBus controller not enabled!
>Linux agpgart interface v0.102 (c) Dave Jones
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 18
>e100: eth0: e100_probe: addr 0xfe202000, irq 18, MAC addr 00:06:5B:3C:3A:FC
>agpgart: unable to determine aperture size.
>agpgart: agp_backend_initialize() failed.
>agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
>agpgart: unable to determine aperture size.
>agpgart: agp_backend_initialize() failed.
>agpgart-serverworks: probe of 0000:00:00.1 failed with error -22
>agpgart: ServerWorks CNB20HE is unsupported due to lack of documentation.
>agpgart: ServerWorks CNB20HE is unsupported due to lack of documentation.
>rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:0a failed with error -16
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>Adding 4200988k swap on /dev/sda2.  Priority:-1 extents:1 across:4200988k
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>AppArmor: AppArmor initialized
>audit(1197286392.921:2):  type=1505 info="AppArmor initialized" pid=1819
>powernow: This module only works with AMD K7 CPUs
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>audit(1197286401.924:3): audit_pid=2979 old=0 by auid=4294967295
>bootsplash: status on console 0 changed to on
>(fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 322855 to 322861
>(fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 14 and revoked 0/0 blocks
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.

Actions: View

Attachments on bug 345866: 185816 | 189700 | 189701 | 189705 | 197497 | 197498