Attachment 191416 Details for Bug 355506

dmeg log

debuglog2 (text/plain), 26.54 KB, created by Tom Dörsam on 2008-01-22 23:58:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tom Dörsam

Created: 2008-01-22 23:58:39 UTC

Size: 26.54 KB

patch

obsolete

>Linux version 2.6.22.13-0.3-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/11/19 15:02:58 UTC
>Command line: root=/dev/system/root resume=/dev/sda2 splash=silent showopts vga=0x31A
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007bee0000 (usable)
> BIOS-e820: 000000007bee0000 - 000000007bee3000 (ACPI NVS)
> BIOS-e820: 000000007bee3000 - 000000007bef0000 (ACPI data)
> BIOS-e820: 000000007bef0000 - 000000007bf00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 507616) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000F82B0, 0024 (r2 ATI   )
>ACPI: XSDT 7BEE3100, 004C (r1 ATI    ASUSACPI 42302E31 AWRD        0)
>ACPI: FACP 7BEE8500, 00F4 (r3 ATI    ASUSACPI 42302E31 AWRD        0)
>ACPI: DSDT 7BEE3280, 5213 (r1 ATI    ASUSACPI     1000 MSFT  3000000)
>ACPI: FACS 7BEE0000, 0040
>ACPI: SSDT 7BEE8740, 0206 (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: HPET 7BEE89C0, 0038 (r1 ATI    ASUSACPI 42302E31 AWRD       98)
>ACPI: MCFG 7BEE8A40, 003C (r1 ATI    ASUSACPI 42302E31 AWRD        0)
>ACPI: APIC 7BEE8640, 0084 (r1 ATI    ASUSACPI 42302E31 AWRD        0)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007bee0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 507616) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007bee0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   507616
>On node 0 totalpages: 507519
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1271 pages reserved
>  DMA zone: 2672 pages, LIFO batch:0
>  DMA32 zone: 6884 pages used for memmap
>  DMA32 zone: 496636 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8200 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7bf00000:64100000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 50296 bytes of per cpu data
>Built 1 zonelists.  Total pages: 499308
>Kernel command line: root=/dev/system/root resume=/dev/sda2 splash=silent showopts vga=0x31A
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 2099.919 MHz processor.
>Console: colour dummy device 80x25
>Checking aperture...
>CPU 0: aperture @ 440000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 1991976k/2030464k available (2053k kernel code, 38100k reserved, 1017k data, 316k init)
>Calibrating delay using timer specific routine.. 4202.96 BogoMIPS (lpj=8405936)
>Security Framework v1.0.0 initialized
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>Unpacking initramfs... done
>Freeing initrd memory: 4922k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 622 Objects with 61 Devices 192 Methods 26 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>result 12499536
>Detected 12.499 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4199.88 BogoMIPS (lpj=8399769)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
>Brought up 2 CPUs
>migration_cost=230
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: No mmconfig possible on device 00:18
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 0 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:......................................................................................................................................
>Initialized 22/26 Regions 10/10 Fields 24/24 Buffers 78/85 Packages (639 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:...
>Executed 3 _INI methods requiring 1 _STA executions (examined 68 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 32-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>pnp: 00:01: ioport range 0x4100-0x411f has been reserved
>pnp: 00:01: ioport range 0x228-0x22f has been reserved
>pnp: 00:01: ioport range 0x40b-0x40b has been reserved
>pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
>pnp: 00:01: ioport range 0xc00-0xc01 has been reserved
>pnp: 00:01: ioport range 0xc14-0xc14 has been reserved
>pnp: 00:01: ioport range 0xc50-0xc52 has been reserved
>pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved
>pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0b: iomem range 0xcd600-0xcffff has been reserved
>pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fda00000-fdbfffff
>  PREFETCH window: f8000000-fbffffff
>PCI: Bridge: 0000:00:07.0
>  IO window: d000-dfff
>  MEM window: fdf00000-fdffffff
>  PREFETCH window: fdc00000-fdcfffff
>PCI: Bridge: 0000:00:14.4
>  IO window: b000-bfff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: fdd00000-fddfffff
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>NET: Registered protocol family 2
>Time: hpet clocksource has been installed.
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1201047946.584:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: MSI quirk detected. MSI deactivated.
>Boot video device is 0000:01:05.0
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>Allocate Port Service[0000:00:07.0:pcie03]
>vesafb: framebuffer at 0xf8000000, mapped to 0xffffc20010b80000, using 10240k, total 16384k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=5
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 76045 bytes
>bootsplash: ...found (1280x1024, 33692 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>NET: Registered protocol family 1
>Freeing unused kernel memory: 316k freed
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:12.0: version 3.0
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 cmd 0xffffc20000326100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22
>ata2: SATA max UDMA/133 cmd 0xffffc20000326180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22
>ata3: SATA max UDMA/133 cmd 0xffffc20000326200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22
>ata4: SATA max UDMA/133 cmd 0xffffc20000326280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
>ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
>ata2.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD321KJ  CP10 PQ: 0 ANSI: 5
>scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD321KJ  CP10 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>scsi4 : pata_atiixp
>scsi5 : pata_atiixp
>ata5: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001e400 irq 14
>ata6: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001e408 irq 15
>ata5.00: ATAPI: DVDRW IDE 16X, VER A07R, max UDMA/66
>ata5.00: limited to UDMA/33 due to 40-wire cable
>ata5.00: configured for UDMA/33
>scsi 4:0:0:0: CD-ROM            DVDRW    IDE 16X          A07R PQ: 0 ANSI: 5
>ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [THRM] (40 C)
>ACPI: Fan [FAN] (on)
>md: raid1 personality registered for level 1
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.22.13-0.3-default ohci_hcd
>usb usb1: SerialNumber: 0000:00:13.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.22.13-0.3-default ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: EHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.22.13-0.3-default ehci_hcd
>usb usb3: SerialNumber: 0000:00:13.5
>usb usb3: configuration #1 chosen from 1 choice
>usb 1-2: new low speed USB device using ohci_hcd and address 2
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 10 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.22.13-0.3-default ohci_hcd
>usb usb4: SerialNumber: 0000:00:13.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.22.13-0.3-default ohci_hcd
>usb usb5: SerialNumber: 0000:00:13.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
>usb usb6: new device found, idVendor=0000, idProduct=0000
>usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: OHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.22.13-0.3-default ohci_hcd
>usb usb6: SerialNumber: 0000:00:13.4
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>md: raid0 personality registered for level 0
>raid5: automatically using best checksumming function: generic_sse
>   generic_sse:  6475.000 MB/sec
>raid5: using function: generic_sse (6475.000 MB/sec)
>raid6: int64x1   1867 MB/s
>raid6: int64x2   2452 MB/s
>raid6: int64x4   2301 MB/s
>raid6: int64x8   2065 MB/s
>usb 4-1: new low speed USB device using ohci_hcd and address 2
>raid6: sse2x1    2629 MB/s
>raid6: sse2x2    3568 MB/s
>raid6: sse2x4    3740 MB/s
>raid6: using algorithm sse2x4 (3740 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>usb 4-1: new device found, idVendor=044f, idProduct=b321
>usb 4-1: new device strings: Mfr=2, Product=30, SerialNumber=0
>usb 4-1: Product: Wireless DT
>usb 4-1: Manufacturer: THRUSTMASTER
>usb 4-1: configuration #1 chosen from 1 choice
>md: md0 stopped.
>md: bind<sdb5>
>md: bind<sda5>
>raid1: raid set md0 active with 2 out of 2 mirrors
>md0: bitmap initialized from disk: read 18/18 pages, set 57 bits, status: 0
>created bitmap (286 pages) for device md0
>md: linear personality registered for level -1
>usb 1-2: new low speed USB device using ohci_hcd and address 3
>usb 1-2: new device found, idVendor=045e, idProduct=0039
>usb 1-2: new device strings: Mfr=1, Product=3, SerialNumber=0
>usb 1-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
>usb 1-2: Manufacturer: Microsoft
>usb 1-2: configuration #1 chosen from 1 choice
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>usb 2-1: new device found, idVendor=046a, idProduct=0010
>usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: SmartBoard XX44
>usb 2-1: Manufacturer: Cherry GmbH
>usb 2-1: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver hiddev
>input: THRUSTMASTER Wireless DT as /class/input/input1
>input: USB HID v1.10 Gamepad [THRUSTMASTER Wireless DT] on usb-0000:00:13.2-1
>input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input2
>input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-2
>input: Cherry GmbH SmartBoard XX44 as /class/input/input3
>input: USB HID v1.11 Keyboard [Cherry GmbH SmartBoard XX44] on usb-0000:00:13.1-1
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
>swsusp: Basic memory bitmaps created
>swsusp: Basic memory bitmaps freed
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>JBD: barrier-based sync failed on dm-0 - disabling barriers
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>scsi 4:0:0:0: Attached scsi generic sg2 type 5
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>r8169 Gigabit Ethernet driver 2.2LK loaded
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: RTL8168b/8111b at 0xffffc20000336000, 00:1b:fc:89:f8:2a, IRQ 19
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:04 failed with error -16
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2333: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2337:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2341:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2349:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ALSA sound/core/init.c:137: cannot find the slot for index 0 (range 0-0), error: -16
>ALSA sound/pci/hda/hda_intel.c:1750: hda-intel: Error creating card!
>HDA Intel: probe of 0000:01:05.2 failed with error -12
>ACPI: Power Button (CM) [PWRB]
>ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 22 (level, low) -> IRQ 22
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>[fglrx] Maximum main memory to use for locked dma buffers: 1826 MBytes.
>[fglrx] ASYNCIO init succeed!
>[fglrx] PAT is enabled successfully!
>[fglrx] module loaded - fglrx 8.44.3 [Dec 19 2007] on minor 0
>Adding 2152700k swap on /dev/sda2.  Priority:-1 extents:1 across:2152700k
>Adding 2152700k swap on /dev/sdb2.  Priority:-2 extents:1 across:2152700k
>JBD: barrier-based sync failed on dm-0 - disabling barriers
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d800013e35f2]
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.8)
>AppArmor: AppArmor initialized
>audit(1201044364.618:2):  type=1505 info="AppArmor initialized" pid=2268
>JBD: barrier-based sync failed on dm-0 - disabling barriers
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0xd (2100 MHz), vid 0xc
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xd
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xf
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>r8169: eth0: link up
>r8169: eth0: link up
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>audit(1201044371.415:3): audit_pid=3181 old=0 by auid=4294967295
>it87: Found IT8716F chip at 0x228, revision 1
>it87: in3 is VCC (+5V)
>it87: in7 is VCCH (+5V Stand-By)
>Unable to handle kernel paging request at 0000000050535467 RIP: 
> [<ffffffff80334b1e>] acpi_ns_map_handle_to_node+0x14/0x1d
>PGD 7513c067 PUD 0 
>Oops: 0000 [1] SMP 
>last sysfs file: /devices/platform/i2c-adapter/i2c-9191/9191-0228/name
>CPU 1 
>Modules linked in: it87 hwmon_vid i2c_isa snd_seq snd_seq_device iptable_filter ip_tables ip6table_filter ip6_tables x_tables ipv6 cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 apparmor fuse dm_crypt loop fglrx(P) ohci1394 ieee1394 button snd_hda_intel parport_pc snd_pcm snd_timer serio_raw snd parport soundcore snd_page_alloc rtc_cmos rtc_core r8169 rtc_lib i2c_piix4 i2c_core k8temp hwmon sr_mod cdrom shpchp pci_hotplug joydev sg linear usbhid hid ff_memless raid456 xor raid0 ehci_hcd ohci_hcd usbcore sd_mod dm_snapshot edd dm_mod raid1 ext3 mbcache jbd fan thermal processor pata_atiixp ahci libata scsi_mod
>Pid: 3474, comm: powersaved Tainted: P      N 2.6.22.13-0.3-default #1
>RIP: 0010:[<ffffffff80334b1e>]  [<ffffffff80334b1e>] acpi_ns_map_handle_to_node+0x14/0x1d
>RSP: 0018:ffff810074ae3e10  EFLAGS: 00010246
>RAX: 0000000000000000 RBX: 0000000000001001 RCX: ffffffff8048108b
>RDX: 0000000000004fd4 RSI: 0000000000000100 RDI: 000000005053545f
>RBP: 000000005053545f R08: ffffffff80480c84 R09: ffffffff80481043
>R10: 0000000000000000 R11: 0000000000000000 R12: ffff810074ae3e78
>R13: ffffffff8033ff94 R14: ffff810074ae3e78 R15: 00002ac69134e000
>FS:  00002ac693196680(0000) GS:ffff810037ab89c0(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 0000000050535467 CR3: 000000007513a000 CR4: 00000000000006e0
>Process powersaved (pid: 3474, threadinfo ffff810074ae2000, task ffff8100762e4850)
>Stack:  ffffffff80333d62 ffff81007880e608 ffff810074ae3e78 000000005053545f
> ffff8100777fab40 ffffffff8808045b ffffffff8033f4cc 0000000000000003
> ffff810079345000 0000000000000000 ffffffff8807f6a8 0000000000100073
>Call Trace:
> [<ffffffff80333d62>] acpi_get_data+0x3e/0x6e
> [<ffffffff8033f4cc>] acpi_bus_get_device+0x25/0x68
> [<ffffffff8807f6a8>] :thermal:acpi_thermal_trip_seq_show+0x12b/0x257
> [<ffffffff802a29e6>] seq_read+0x105/0x28b
> [<ffffffff8028a42d>] vfs_read+0xcb/0x153
> [<ffffffff8028a7c1>] sys_read+0x45/0x6e
> [<ffffffff80209c2e>] system_call+0x7e/0x83
>
>
>Code: 80 7f 08 0f 48 0f 44 c7 c3 48 89 f8 c3 31 c0 48 85 ff 74 0d 
>RIP  [<ffffffff80334b1e>] acpi_ns_map_handle_to_node+0x14/0x1d
> RSP <ffff810074ae3e10>
>CR2: 0000000050535467
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 355506: 191416 | 191417 | 193559 | 193563