Attachment 192349 Details for Bug 355786

/var/log/boot.msg

boot.msg (text/plain), 52.63 KB, created by Michael Taylor on 2008-01-30 15:21:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michael Taylor

Created: 2008-01-30 15:21:17 UTC

Size: 52.63 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.22.13-0.3-bigsmp
>Loaded 26188 symbols from /boot/System.map-2.6.22.13-0.3-bigsmp.
>Symbols match kernel version 2.6.22.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.22.13-0.3-bigsmp (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/11/19 15:02:58 UTC
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
><4> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
><4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 00000000bfeb0000 (usable)
><4> BIOS-e820: 00000000bfeb0000 - 00000000bfecc000 (ACPI data)
><4> BIOS-e820: 00000000bfecc000 - 00000000bff00000 (ACPI NVS)
><4> BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
><4> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
><4> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
><4> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
><4> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
><4> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
><4> BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
><5>4160MB HIGHMEM available.
><5>896MB LOWMEM available.
><6>found SMP MP-table at 000f6900
><4>NX (Execute Disable) protection: active
><7>Entering add_active_range(0, 0, 1294336) 0 entries of 256 used
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  Normal       4096 ->   229376
><4>  HighMem    229376 ->  1294336
><4>early_node_map[1] active PFN ranges
><4>    0:        0 ->  1294336
><7>On node 0 totalpages: 1294336
><7>  DMA zone: 32 pages used for memmap
><7>  DMA zone: 0 pages reserved
><7>  DMA zone: 4064 pages, LIFO batch:0
><7>  Normal zone: 1760 pages used for memmap
><7>  Normal zone: 223520 pages, LIFO batch:31
><7>  HighMem zone: 8320 pages used for memmap
><7>  HighMem zone: 1056640 pages, LIFO batch:31
><6>DMI present.
><6>Using APIC driver default
><4>ACPI: RSDP 000F68D0, 0024 (r2 LENOVO)
><4>ACPI: XSDT BFEBB765, 0094 (r1 LENOVO TP-7L        2070  LTP        0)
><4>ACPI: FACP BFEBB900, 00F4 (r3 LENOVO TP-7L        2070 LNVO        1)
><4>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
><4>ACPI: DSDT BFEBBD1D, FEEB (r1 LENOVO TP-7L        2070 MSFT  3000000)
><4>ACPI: FACS BFEE4000, 0040
><4>ACPI: SSDT BFEBBAB4, 0269 (r1 LENOVO TP-7L        2070 MSFT  3000000)
><4>ACPI: ECDT BFECBC08, 0052 (r1 LENOVO TP-7L        2070 LNVO        1)
><4>ACPI: TCPA BFECBC5A, 0032 (r2 LENOVO TP-7L        2070 LNVO        1)
><4>ACPI: APIC BFECBC8C, 0068 (r1 LENOVO TP-7L        2070 LNVO        1)
><4>ACPI: MCFG BFECBCF4, 003C (r1 LENOVO TP-7L        2070 LNVO        1)
><4>ACPI: HPET BFECBD30, 0038 (r1 LENOVO TP-7L        2070 LNVO        1)
><4>ACPI: SLIC BFECBDF0, 0176 (r1 LENOVO TP-7L        2070  LTP        0)
><4>ACPI: BOOT BFECBF66, 0028 (r1 LENOVO TP-7L        2070  LTP        1)
><4>ACPI: ASF! BFECBF8E, 0072 (r16 LENOVO TP-7L        2070 PTL         1)
><4>ACPI: SSDT BFEE271B, 025F (r1 LENOVO TP-7L        2070 INTL 20050513)
><4>ACPI: SSDT BFEE297A, 00A6 (r1 LENOVO TP-7L        2070 INTL 20050513)
><4>ACPI: SSDT BFEE2A20, 04F7 (r1 LENOVO TP-7L        2070 INTL 20050513)
><4>ACPI: SSDT BFEE2F17, 01D8 (r1 LENOVO TP-7L        2070 INTL 20050513)
><6>ACPI: PM-Timer IO Port: 0x1008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><4>Processor #0 6:15 APIC version 20
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
><4>Processor #1 6:15 APIC version 20
><6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
><4>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
><6>ACPI: HPET id: 0x8086a201 base: 0xfed00000
><6>Using ACPI (MADT) for SMP configuration information
><4>Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
><4>Built 1 zonelists.  Total pages: 1284224
><5>Kernel command line: root=/dev/sda2 vga=0x31A resume=/dev/sda1 splash=silent PROFILE=Home PROFILE=Home
><6>bootsplash: silent mode.
><7>mapped APIC to ffffd000 (fee00000)
><7>mapped IOAPIC to ffffc000 (fec00000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 16384 bytes)
><4>Detected 2593.756 MHz processor.
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 4077100k/5177344k available (1859k kernel code, 49000k reserved, 902k data, 232k init, 3209920k highmem)
><4>virtual kernel memory layout:
><4>    fixmap  : 0xff8b4000 - 0xfffff000   (7468 kB)
><4>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
><4>    vmalloc : 0xf8800000 - 0xff5fe000   ( 109 MB)
><4>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
><4>      .init : 0xc03ba000 - 0xc03f4000   ( 232 kB)
><4>      .data : 0xc02d0c81 - 0xc03b26d8   ( 902 kB)
><4>      .text : 0xc0100000 - 0xc02d0c81   (1859 kB)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
><6>hpet0: 3 64-bit timers, 14318180 Hz
><4>Calibrating delay using timer specific routine.. 5193.38 BogoMIPS (lpj=10386763)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
><4>monitor/mwait feature present.
><4>using mwait in idle threads.
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><7>CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><4>Compat vDSO mapped to ffffe000.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 4058k freed
><6>ACPI: Core revision 20070126
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 1828 Objects with 81 Devices 475 Methods 33 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0002) - 11 Objects with 0 Devices 7 Methods 0 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0005) - 14 Objects with 0 Devices 5 Methods 0 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0006) - 14 Objects with 1 Devices 2 Methods 0 Regions
><4> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><4>CPU0: Intel(R) Core(TM)2 Duo CPU     T7800  @ 2.60GHz stepping 0b
><6>SMP alternatives: switching to SMP code
><4>Booting processor 1/1 eip 3000
><6>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 5186.96 BogoMIPS (lpj=10373921)
><7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
><4>monitor/mwait feature present.
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><7>CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#1.
><4>CPU1: Intel(R) Core(TM)2 Duo CPU     T7800  @ 2.60GHz stepping 0b
><6>Total of 2 processors activated (10380.34 BogoMIPS).
><4>ENABLING IO-APIC IRQs
><6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
><6>checking TSC synchronization [CPU#0 -> CPU#1]:
><4>Measured 472082 cycles TSC warp between CPUs, turning off TSC clock.
><4>Marking TSC unstable due to: check_tsc_sync_source failed.
><6>Brought up 2 CPUs
><4>migration_cost=4000
><6>Booting paravirtualized kernel on bare hardware
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: Using MMCONFIG
><4>Setting up standard PCI resources
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 3 Runtime GPEs in this block
><6>ACPI: EC: EC description table is found, configuring boot EC
><4>
><4>Completing Region/Field/Buffer/Package initialization:..............................................................................................................................................................................................................................................................................................
><4>Initialized 29/33 Regions 138/138 Fields 64/64 Buffers 55/72 Packages (1887 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:.<4>ACPI: System BIOS is requesting _OSI(Linux)
><4>ACPI: Please test with "acpi_osi=!Linux"
><4>Please send dmidecode to linux-acpi@vger.kernel.org
><4>........
><4>Executed 9 _INI methods requiring 2 _STA executions (examined 88 objects)
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
><6>ACPI: Power Resource [PUBS] (on)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 13 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PnPBIOS: Disabled by ACPI PNP
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>ACPI: RTC can wake from S4
><6>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
><6>pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
><6>pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
><6>pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved
><6>pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
><6>pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
><6>pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
><6>pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
><6>Time: hpet clocksource has been installed.
><6>Switched to NOHz mode on CPU #0
><6>Switched to NOHz mode on CPU #1
><3>PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: 2000-2fff
><6>  MEM window: d4000000-d6ffffff
><6>  PREFETCH window: e0000000-efffffff
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: 3000-3fff
><6>  MEM window: fc000000-fdffffff
><6>  PREFETCH window: f8000000-f80fffff
><6>PCI: Bridge: 0000:00:1c.1
><6>  IO window: 4000-4fff
><6>  MEM window: dc100000-df2fffff
><6>  PREFETCH window: dfd00000-dfdfffff
><6>PCI: Bridge: 0000:00:1c.2
><6>  IO window: 5000-5fff
><6>  MEM window: d8000000-d9ffffff
><6>  PREFETCH window: dfa00000-dfafffff
><6>PCI: Bridge: 0000:00:1c.3
><6>  IO window: 6000-6fff
><6>  MEM window: d0000000-d1ffffff
><6>  PREFETCH window: df700000-df7fffff
><6>PCI: Bridge: 0000:00:1c.4
><6>  IO window: 7000-7fff
><6>  MEM window: cc000000-cdffffff
><6>  PREFETCH window: df400000-df4fffff
><4>PCI: Bus 22, cardbus bridge: 0000:15:00.0
><4>  IO window: 00008000-000080ff
><4>  IO window: 00008400-000084ff
><4>  PREFETCH window: f4000000-f7ffffff
><4>  MEM window: c4000000-c7ffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 8000-bfff
><6>  MEM window: f8100000-fbffffff
><6>  PREFETCH window: f4000000-f7ffffff
><6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
><4>PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:15:00.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
><4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>Simple Boot Flag at 0x35 set to 0x1
><6>Machine check exception polling timer started.
><6>audit: initializing netlink socket (disabled)
><5>audit(1201632781.668:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>Boot video device is 0000:01:00.0
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:01.0:pcie00]
><7>Allocate Port Service[0000:00:01.0:pcie02]
><7>Allocate Port Service[0000:00:01.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><7>Allocate Port Service[0000:00:1c.0:pcie02]
><7>Allocate Port Service[0000:00:1c.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.1:pcie00]
><7>Allocate Port Service[0000:00:1c.1:pcie02]
><7>Allocate Port Service[0000:00:1c.1:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.2:pcie00]
><7>Allocate Port Service[0000:00:1c.2:pcie02]
><7>Allocate Port Service[0000:00:1c.2:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.3:pcie00]
><7>Allocate Port Service[0000:00:1c.3:pcie02]
><7>Allocate Port Service[0000:00:1c.3:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.4:pcie00]
><7>Allocate Port Service[0000:00:1c.4:pcie02]
><7>Allocate Port Service[0000:00:1c.4:pcie03]
><6>vesafb: framebuffer at 0xd5000000, mapped to 0xf8880000, using 10240k, total 14336k
><6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
><6>vesafb: protected mode interface info at c000:d1e0
><6>vesafb: pmi: set display start = c00cd243, set palette = c00cd29e
><6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...
><6>bootsplash: silentjpeg size 98233 bytes
><6>bootsplash: ...found (1280x1024, 35219 bytes, v3).
><4>Console: switching to colour frame buffer device 156x60
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><7>hpet_resources: 0xfed00000 is busy
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>pnp: Device 00:0a activated.
><6>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><4>floppy0: no floppy controllers found
><6>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><6>input: PC Speaker as /class/input/input1
><6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
><6>serio: Synaptics pass-through port at isa0060/serio1/input0
><6>input: SynPS/2 Synaptics TouchPad as /class/input/input2
><6>NET: Registered protocol family 1
><4>Using IPI No-Shortcut mode
><6>Freeing unused kernel memory: 232k freed
><4>ACPI: SSDT BFEE1B32, 0306 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0065) - 6 Objects with 0 Devices 4 Methods 0 Regions
><4>ACPI: SSDT BFEE1EBD, 085E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0066) - 16 Objects with 0 Devices 1 Methods 0 Regions
><7>Monitor-Mwait will be used to enter C-1 state
><7>Monitor-Mwait will be used to enter C-2 state
><7>Monitor-Mwait will be used to enter C-3 state
><6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><4>ACPI: SSDT BFEE1A6A, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 006C) - 4 Objects with 0 Devices 4 Methods 0 Regions
><4>ACPI: SSDT BFEE1E38, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 006D) - 1 Objects with 0 Devices 1 Methods 0 Regions
><6>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
><6>ACPI: Processor [CPU1] (supports 8 throttling states)
><6>ACPI: Thermal Zone [THM0] (60 C)
><6>ACPI: Thermal Zone [THM1] (60 C)
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><7>ahci 0000:00:1f.2: version 3.0
><6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16
><4>ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match
><4>Clocksource tsc unstable (delta = -274504206 ns)
><6>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
><6>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>scsi0 : ahci
><6>ata1: SATA max UDMA/133 cmd 0xf886c100 ctl 0x00000000 bmdma 0x00000000 irq 217
><6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata1.00: ATA-8: Hitachi HTS722020K9SA00, DC4OC54P, max UDMA/133
><6>ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
><6>ata1.00: configured for UDMA/133
><5>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72202 DC4O PQ: 0 ANSI: 5
><7>ata_piix 0000:00:1f.1: version 2.11
><6>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
><6>scsi1 : ata_piix
><6>scsi2 : ata_piix
><6>ata2: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011830 irq 14
><6>ata3: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011838 irq 15
><6>ata2.00: ATA-7: ST9160823AS, 3.CMC, max UDMA/100
><6>ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
><6>ata2.00: configured for UDMA/100
><7>ata3: port disabled. ignoring.
><5>scsi 1:0:0:0: Direct-Access     ATA      ST9160823AS      3.CM PQ: 0 ANSI: 5
><6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>USB Universal Host Controller Interface driver v3.0
><6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
><6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1a.0: irq 17, io base 0x00001860
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><5>sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda:<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.22.13-0.3-bigsmp uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:1a.0
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
><6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001880
><6>usb usb2: new device found, idVendor=0000, idProduct=0000
><6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
><4> sda1 sda2 sda3
><6>usb usb2: Product: UHCI Host Controller
><5>sd 0:0:0:0: [sda] Attached SCSI disk
><5>sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
><5>sd 1:0:0:0: [sdb] Write Protect is off
><7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
><5>sd 1:0:0:0: [sdb] Write Protect is off
><7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb:<6>usb usb2: Manufacturer: Linux 2.6.22.13-0.3-bigsmp uhci_hcd
><6>usb usb2: SerialNumber: 0000:00:1a.1
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><4> sdb1 sdb2 sdb3
><6>hub 2-0:1.0: 2 ports detected
><5>sd 1:0:0:0: [sdb] Attached SCSI disk
><6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
><6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
><6>usb 1-2: new full speed USB device using uhci_hcd and address 2
><7>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
><6>ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfe226c00
><6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb3: new device found, idVendor=0000, idProduct=0000
><6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: EHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.22.13-0.3-bigsmp ehci_hcd
><6>usb usb3: SerialNumber: 0000:00:1a.7
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 4 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfe227000
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb4: new device found, idVendor=0000, idProduct=0000
><6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: EHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.22.13-0.3-bigsmp ehci_hcd
><6>usb usb4: SerialNumber: 0000:00:1d.7
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 6 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
><6>uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
><6>usb usb5: new device found, idVendor=0000, idProduct=0000
><6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb5: Product: UHCI Host Controller
><6>usb usb5: Manufacturer: Linux 2.6.22.13-0.3-bigsmp uhci_hcd
><6>usb usb5: SerialNumber: 0000:00:1d.0
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
><6>usb 3-4: new high speed USB device using ehci_hcd and address 3
><6>uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018c0
><6>usb usb6: new device found, idVendor=0000, idProduct=0000
><6>usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb6: Product: UHCI Host Controller
><6>usb usb6: Manufacturer: Linux 2.6.22.13-0.3-bigsmp uhci_hcd
><6>usb usb6: SerialNumber: 0000:00:1d.1
><6>usb usb6: configuration #1 chosen from 1 choice
><6>hub 6-0:1.0: USB hub found
><6>hub 6-0:1.0: 2 ports detected
><6>usb 3-4: new device found, idVendor=04b3, idProduct=4485
><6>usb 3-4: new device strings: Mfr=0, Product=0, SerialNumber=0
><6>usb 3-4: configuration #1 chosen from 1 choice
><6>hub 3-4:1.0: USB hub found
><6>hub 3-4:1.0: 4 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
><6>uhci_hcd 0000:00:1d.2: irq 23, io base 0x000018e0
><6>usb usb7: new device found, idVendor=0000, idProduct=0000
><6>usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb7: Product: UHCI Host Controller
><6>usb usb7: Manufacturer: Linux 2.6.22.13-0.3-bigsmp uhci_hcd
><6>usb usb7: SerialNumber: 0000:00:1d.2
><6>usb usb7: configuration #1 chosen from 1 choice
><6>hub 7-0:1.0: USB hub found
><6>hub 7-0:1.0: 2 ports detected
><4>swsusp: Basic memory bitmaps created
><4>swsusp: Basic memory bitmaps freed
><4>Attempting manual resume
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda2, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>usb 4-4: new high speed USB device using ehci_hcd and address 4
><6>usb 4-4: new device found, idVendor=1307, idProduct=0163
><6>usb 4-4: new device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 4-4: Product: TS32GSSD34E
><6>usb 4-4: Manufacturer: Transcend
><6>usb 4-4: SerialNumber: 1b95d662d2d4e8
><6>usb 4-4: configuration #1 chosen from 1 choice
><6>usb 1-2: new full speed USB device using uhci_hcd and address 3
><6>usb 1-2: new device found, idVendor=0483, idProduct=2016
><6>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 1-2: Product: Biometric Coprocessor
><6>usb 1-2: Manufacturer: STMicroelectronics
><6>usb 1-2: configuration #1 chosen from 1 choice
><6>usb 5-2: new low speed USB device using uhci_hcd and address 2
><6>usb 5-2: new device found, idVendor=046d, idProduct=c521
><6>usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 5-2: Product: USB Receiver
><6>usb 5-2: Manufacturer: Logitech
><6>usb 5-2: configuration #1 chosen from 1 choice
><6>usb 6-1: new full speed USB device using uhci_hcd and address 2
><6>usb 6-1: new device found, idVendor=1199, idProduct=0220
><6>usb 6-1: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 6-1: Product: Sierra Wireless MC5725 Modem
><6>usb 6-1: Manufacturer: Sierra Wireless, Incorporated
><6>usb 6-1: configuration #1 chosen from 1 choice
><6>IBM TrackPoint firmware: 0x0e, buttons: 3/3
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>sd 1:0:0:0: Attached scsi generic sg1 type 0
><6>input: TPPS/2 IBM TrackPoint as /class/input/input3
><6>Non-volatile memory driver v1.2
><6>Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI
><6>Copyright (c) 1999-2007 Intel Corporation.
><6>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:19.0 to 64
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1e:37:86:99:d9
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>parport_pc 00:0b: reported by Plug and Play ACPI
><6>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
><6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
><6>ACPI: ACPI Dock Station Driver 
><6>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 20
><6>input: Power Button (FF) as /class/input/input4
><6>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
><4>rtc_cmos: probe of 00:07 failed with error -16
><6>eth0 renamed to eth1
><6>udev: renamed network interface eth0 to eth1
><6>ACPI: Power Button (FF) [PWRF]
><6>sdhci: Secure Digital Host Controller Interface driver
><6>sdhci: Copyright(c) Pierre Ossman
><6>sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 21)
><6>ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:15:00.2 to 64
><6>mmc0: SDHCI at 0xf8101800 irq 23 DMA
><6>input: Lid Switch as /class/input/input5
><6>ACPI: Lid Switch [LID]
><6>input: Sleep Button (CM) as /class/input/input6
><6>ACPI: Sleep Button (CM) [SLPB]
><6>Initializing USB Mass Storage driver...
><6>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
><6>scsi3 : SCSI emulation for USB Mass Storage devices
><6>ACPI: AC Adapter [AC] (on-line)
><6>usbcore: registered new interface driver usb-storage
><6>USB Mass Storage support registered.
><7>usb-storage: device found at 4
><7>usb-storage: waiting for device to settle before scanning
><6>thinkpad_acpi: ThinkPad ACPI Extras v0.14
><6>ACPI: Battery Slot [BAT0] (battery absent)
><6>thinkpad_acpi: http://ibm-acpi.sf.net/
><6>thinkpad_acpi: ThinkPad BIOS 7LETA7WW (2.07 ), EC 7KHT24WW-1.08
><6>thinkpad_acpi: Lenovo ThinkPad T61p
><6>Yenta: ISA IRQ mask 0x0c38, PCI irq 16
><6>Socket status: 30000006
><6>pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
><6>cs: IO port probe 0x8000-0xbfff: clean.
><6>pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
><6>pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
><6>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
><6>hda_intel: probe_mask set to 0x1 for device 17aa:20ac
><7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
><6>usbcore: registered new interface driver hiddev
><6>input: Logitech USB Receiver as /class/input/input7
><6>input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2
><6>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0s
><6>iwl4965: Copyright(c) 2003-2007 Intel Corporation
><6>ALSA sound/pci/hda/hda_codec.c:1804: hda_codec: model 'thinkpad' is selected
><6>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 22
><7>PCI: Setting latency timer of device 0000:03:00.0 to 64
><6>input: Logitech USB Receiver as /class/input/input8
><6>input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2
><6>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><6>ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 22
><7>PCI: Setting latency timer of device 0000:15:00.1 to 64
><6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[f8101000-f81017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
><4>nvidia: module license 'NVIDIA' taints kernel.
><6>cs: IO port probe 0x100-0x3af: clean.
><6>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
><7>wmaster0: Selected rate control algorithm 'iwl-4965-rs'
><6>cs: IO port probe 0xc00-0xcf7: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:01:00.0 to 64
><4>NVRM: loading NVIDIA UNIX x86 Kernel Module  169.07  Thu Dec 13 18:42:56 PST 2007
><5>scsi 3:0:0:0: Direct-Access     SSD34E   TS32GSSD34E-M    0.00 PQ: 0 ANSI: 2
><5>sd 3:0:0:0: [sdc] 63438847 512-byte hardware sectors (32481 MB)
><5>sd 3:0:0:0: [sdc] Write Protect is off
><6>wlan0 renamed to wlan1
><6>udev: renamed network interface wlan0 to wlan1
><7>sd 3:0:0:0: [sdc] Mode Sense: 00 00 00 00
><3>sd 3:0:0:0: [sdc] Assuming drive cache: write through
><5>sd 3:0:0:0: [sdc] 63438847 512-byte hardware sectors (32481 MB)
><5>sd 3:0:0:0: [sdc] Write Protect is off
><7>sd 3:0:0:0: [sdc] Mode Sense: 00 00 00 00
><3>sd 3:0:0:0: [sdc] Assuming drive cache: write through
><6> sdc: sdc1
><5>sd 3:0:0:0: [sdc] Attached SCSI removable disk
><5>sd 3:0:0:0: Attached scsi generic sg2 type 0
><7>usb-storage: device scan complete
><4>QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
><4>KQEMU installed, max_locked_mem=2041160kB.
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><6>Adding 6345632k swap on /dev/sda1.  Priority:-1 extents:1 across:6345632k
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00061b032a1caa7a]
><6>loop: module loaded
><6>SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><5>XFS mounting filesystem sda3
><7>Ending clean XFS mount for filesystem: sda3
><5>XFS mounting filesystem sdb3
><7>Ending clean XFS mount for filesystem: sdb3
><4>fuse init (API version 7.8)
><6>AppArmor: AppArmor initialized
><5>audit(1201632798.668:2):  type=1505 info="AppArmor initialized" pid=2414
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Tue Jan 29 10:53:12 2008
>
>done
>Starting udevd udevd[1268]: add_to_rules: invalid ATTRS operation
>
>udevd[1268]: add_to_rules: invalid rule '/etc/udev/rules.d/10-local.rules:1'
>
>udevd[1268]: add_to_rules: invalid KERNEL operation
>
>udevd[1268]: add_to_rules: invalid rule '/etc/udev/rules.d/10-smwan.rules:9'
>
>udevd[1268]: add_to_rules: invalid KERNEL operation
>
>udevd[1268]: add_to_rules: invalid rule '/etc/udev/rules.d/10-smwan.rules:11'
>
>udevd[1268]: add_to_rules: invalid KERNEL operation
>
>udevd[1268]: add_to_rules: invalid rule '/etc/udev/rules.d/10-smwan.rules:13'
>
>udevd-event[2024]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it
>
>done
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>donemount: according to mtab, /dev/sda2 is already mounted on /
>
>Activating device mapper...
>done
>Waiting for tmpfs . no more events
>Checking file systems...
>fsck 1.40.2 (12-Jul-2007)
>/sbin/fsck.xfs: XFS file system.
>/sbin/fsck.xfs: XFS file system.
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda3 on /lv01 type xfs (rw,noatime)
>tmpfs on /dev/shm type tmpfs (rw)
>/dev/sdb3 on /lvw01 type xfs (rw,noatime)
>doneConfiguring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>Configured serial ports
>doneActivating remaining swap-devices in /etc/fstab...
>doneSetting up the hardware clockdone
>Mounting securityfs on /sys/kernel/security done
>Loading AppArmor module done
>Loading AppArmor profiles <notice>killproc: kill(1244,29)
>Creating /var/log/boot.msg
>donedone
>Setting up hostname 'plato'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>Can't determine current runlevel
>done
>Setting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>fs.file-max = 6553600
>net.core.rmem_default = 4194304
>net.core.rmem_max = 4194304
>net.core.wmem_default = 262144
>net.core.wmem_max = 262144
>done
>Enabling syn flood protectiondone
>Enabling IP forwardingdone
>done
>System Boot Control: The system has been set up
>Skipped features: boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(1244,3)
>
>INIT: Entering runlevel: 5
>
>
>
>Boot logging started on /dev/tty1(/dev/console) at Tue Jan 29 18:53:21 2008
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>Starting D-Bus daemonUnknown username "gdm" in message bus configuration file
>done
>Starting resource manager<notice> ROOTFS_FSTYPE=ext3startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux PROFILE=Home ROOTFS_FSCK=0IX INIT_VERSI REDIRECT=/dev/tty1 PATH=/bin:/sr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
> SHELL=/bin/sh LC_ALL=POSON=sysvinit-2.86 COLUMNS=156sbin:/udone
>Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 PROFILE=Home LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
>.<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 PROFILE=Home LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/sbin/klogd ]
>done
>Starting acpid <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/sbin/acpid ]
>done
>Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
>done
>Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>done
>Loading CPUFreq modulesdone
>Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 PROFILE=Home INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=en_US.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
>done
>Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>Checking/updating CPU microcode done
>Initializing random number generatordone
>done
>Setting up network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
><notice>checkproc: /opt/kde3/bin/kdm 2871
>doneWaiting for mandatory devices:  eth1 __NSC__
>19 18 17 16 14 13 12 11 9 8 7 6 4 3 2 1 0 
>    eth1      device: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
>    eth1      is down
>failed    eth1      interface could not be set up until now
>failedSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .failed
><notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/sbin/auditd ]
><notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
><notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/sbin/portmap ]
><notice>startproc: execve (/usr/bin/smwand) [ /usr/bin/smwand ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/bin/smwand ]
>Starting smwand: done
>Starting RPC portmap daemondone
>Starting Samba NMB daemon done
>Mount CIFS File Systems unused
>Starting auditd done
><notice>startproc: execve (/usr/bin/ntop) [ /usr/bin/ntop -P /var/lib/ntop -i ppp0 -u wwwrun -w 127.0.0.1:3000 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/bin/ntop ]
>Starting service ntop done
>Starting NFS client services: sm-notifyBackgrounding to notify hosts...
> idmapd<notice>startproc: execve (/usr/sbin/rpc.idmapd) [ /usr/sbin/rpc.idmapd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/rpc.idmapd ]
>done
>Loading keymap i386/qwerty/us.map.gz
>done<notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
><notice>startproc: execve (/usr/sbin/dovecot) [ /usr/sbin/dovecot ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/dovecot ]
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
>Starting irqbalance done
><notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -u ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
>Starting dovecot done
>Starting cupsddone
>Starting network time protocol daemon (NTPD)done
>Loading compose table latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
><notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
>Starting powersaved: done
>doneStarting bluetooth:  hcid hid2hci opd rfcommdone
><notice>checkproc: /opt/kde3/bin/kdm 2871
>Starting hotkey-setup done
>Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>done
>Starting mail service (Postfix)Starting service MySQL done
>done
>Starting httpd2 (prefork) <notice>startproc: execve (/usr/sbin/httpd2-prefork) [ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 get_module_list_done=true LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 get_includes_done=true PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/var/lib/apache2 SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/httpd2-prefork ]
>(99)Cannot assign requested address: make_sock: could not bind to address 192.168.1.106:80
>no listening sockets available, shutting down
>Unable to open logs
>startproc:  exit status of parent of /usr/sbin/httpd2-prefork: 1
>failed
>Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>done
>Starting smartd <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
>done
>Starting Samba SMB daemon <notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg LANG=en_US.UTF-8 PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 LC_CTYPE= splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
>done
>Starting SMPPPD<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
>done
>Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>done
>Starting INET services. (xinetd)<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=Home ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31A RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
>nohup: appending output to `nohup.out'
>/usr/bin/xhost:  unable to open display "plato.verizon.net:50.0"
>done
>nohup: appending output to `nohup.out'
>done
>done
>Starting Firewall Initialization (phase 2 of 2) done
>Master Resource Control: runlevel 5 has been reached
>Failed services in runlevel 5: network apache2
>Skipped services in runlevel 5: smbfs raw
><notice>killproc: kill(2613,3)

Actions: View

Attachments on bug 355786: 192349 | 192351 | 192352 | 218366