Attachment 194257 Details for Bug 304162

dmesg

dmesg (text/plain), 30.64 KB, created by Forgotten User B-7XM5iatA on 2008-02-11 17:41:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Forgotten User B-7XM5iatA

Created: 2008-02-11 17:41:21 UTC

Size: 30.64 KB

patch

obsolete

>Linux version 2.6.22.16-0.2-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/01 19:36:55 UTC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
> BIOS-e820: 000000001f6e0000 - 000000001f700000 (ACPI NVS)
> BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>502MB LOWMEM available.
>found SMP MP-table at 000f67a0
>Entering add_active_range(0, 0, 128736) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   128736
>  HighMem    128736 ->   128736
>early_node_map[1] active PFN ranges
>    0:        0 ->   128736
>On node 0 totalpages: 128736
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 973 pages used for memmap
>  Normal zone: 123667 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6720, 0024 (r2 LENOVO)
>ACPI: XSDT 1F6E6784, 0094 (r1 LENOVO TP-63          62  LTP        0)
>ACPI: FACP 1F6ECBC4, 00F4 (r3 INTEL  TP-63          62 ALAN        1)
>ACPI: DSDT 1F6E85B5, 459B (r1 LENOVO TP-63          62 INTL 20060608)
>ACPI: FACS 1F6EDFC0, 0040
>ACPI: APIC 1F6ECCB8, 0068 (r1 INTEL  TP-63          62 LOHR       5A)
>ACPI: HPET 1F6ECD20, 0038 (r1 INTEL  TP-63          62 LOHR       5A)
>ACPI: MCFG 1F6ECD58, 003C (r1 INTEL  TP-63          62 LOHR       5A)
>ACPI: TCPA 1F6ECD94, 0032 (r1 Phoeni TP-63          62  TL         0)
>ACPI: SLIX 1F6ECDC6, 0176 (r1 LENOVO TP-63          62 TBD         1)
>ACPI: DBGP 1F6ECF3C, 0034 (r1 LENOVO TP-63          62 LOHR        0)
>ACPI: APIC 1F6ECF70, 0068 (r1 PTLTD  TP-63          62  LTP        0)
>ACPI: BOOT 1F6ECFD8, 0028 (r1 PTLTD  TP-63          62  LTP        1)
>ACPI: SSDT 1F6E7F66, 064F (r1 SataRe  SataPri     1000 INTL 20050624)
>ACPI: SSDT 1F6E78D4, 0692 (r1 SataRe  SataSec     1000 INTL 20050624)
>ACPI: SSDT 1F6E6DC6, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
>ACPI: SSDT 1F6E6D20, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)
>ACPI: SSDT 1F6E6818, 0508 (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:14 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
>Built 1 zonelists.  Total pages: 127731
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2120_NW9ST7429273-part3 vga=0x317 resume=/dev/sda2 splash=silent
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1995.154 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 502496k/514944k available (1829k kernel code, 11900k reserved, 764k data, 228k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffdf4000 - 0xfffff000   (2092 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
>    lowmem  : 0xc0000000 - 0xdf6e0000   ( 502 MB)
>      .init : 0xc0390000 - 0xc03c9000   ( 228 kB)
>      .data : 0xc02c957b - 0xc0388964   ( 764 kB)
>      .text : 0xc0100000 - 0xc02c957b   (1829 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Calibrating delay using timer specific routine.. 3995.72 BogoMIPS (lpj=7991458)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Unpacking initramfs... done
>Freeing initrd memory: 4016k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 779 Objects with 53 Devices 176 Methods 26 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 10 Objects with 3 Devices 4 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0003) - 10 Objects with 3 Devices 4 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0004) - 7 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0005) - 4 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0006) - 13 Objects with 0 Devices 4 Methods 0 Regions
> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>CPU0: Intel(R) Core(TM) Duo CPU      T2450  @ 2.00GHz stepping 0c
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.15 BogoMIPS (lpj=7980314)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM) Duo CPU      T2450  @ 2.00GHz stepping 0c
>Total of 2 processors activated (7985.88 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>migration_cost=45
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 2 Wake, Enabled 9 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:........................................................
>Initialized 22/26 Regions 0/0 Fields 25/26 Buffers 9/10 Packages (832 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:<4>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: Please test with "acpi_osi=!Linux"
>Please send dmidecode to linux-acpi@vger.kernel.org
>.
>Executed 1 _INI methods requiring 0 _STA executions (examined 64 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>ACPI: RTC can wake from S4
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
>pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
>Time: tsc clocksource has been installed.
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #1
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: d0000000-d00fffff
>  PREFETCH window: disabled.
>PCI: Bus 6, cardbus bridge: 0000:05:04.0
>  IO window: 00002400-000024ff
>  IO window: 00002800-000028ff
>  PREFETCH window: 30000000-33ffffff
>  MEM window: 34000000-37ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-2fff
>  MEM window: d0100000-d01fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 17
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>Simple Boot Flag at 0x36 set to 0x1
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>audit(1202748946.852:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>vesafb: framebuffer at 0xc0000000, mapped to 0xe0080000, using 6144k, total 7872k
>vesafb: mode is 1024x768x16, linelength=2048, pages=4
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 78436 bytes
>bootsplash: ...found (1024x768, 28133 bytes, v3).
>Console: switching to colour frame buffer device 124x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>floppy0: no floppy controllers found
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 228k freed
>ACPI: SSDT 1F6E7592, 027A (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 00F0) - 6 Objects with 0 Devices 3 Methods 0 Regions
>ACPI: SSDT 1F6E7025, 04E8 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 00F2) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 1F6E780C, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 00F9) - 4 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: SSDT 1F6E750D, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 00FA) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: hpet clocksource has been installed.
>ACPI Exception (thermal-0407): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
>ACPI: Thermal Zone [TZ00] (26 C)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.11
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
>ata1.00: ATA-7: FUJITSU MHV2120BH PL, 0084002A, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04753/0x200000
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>input: AT Translated Set 2 keyboard as /class/input/input2
>ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, TX07, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2120B 0084 PQ: 0 ANSI: 5
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GMA-4082N TX07 PQ: 0 ANSI: 5
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> sda1 sda2 sda3 sda4
>ehci_hcd 0000:00:1d.7: debug port 1
>sd 0:0:0:0: [sda] Attached SCSI disk
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd0544000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.22.16-0.2-default ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.22.16-0.2-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001840
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.22.16-0.2-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.22.16-0.2-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.22.16-0.2-default uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>swsusp: Basic memory bitmaps created
>swsusp: Basic memory bitmaps freed
>Attempting manual resume
>usb 2-2: new device found, idVendor=0a5c, idProduct=2101
>usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: Foxconn Bluetooth 2.0 plus EDR
>usb 2-2: Manufacturer: Broadcom Corp
>usb 2-2: configuration #1 chosen from 1 choice
>REISERFS (device sda3): found reiserfs format "3.6" with standard journal
>REISERFS (device sda3): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda3): checking transaction log (sda3)
>REISERFS (device sda3): Using r5 hash to sort names
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Linux agpgart interface v0.102 (c) Dave Jones
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>8139cp 0000:05:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:05:01.0: Try the "8139too" driver instead.
>input: Power Button (FF) as /class/input/input3
>ieee80211_crypt: registered algorithm 'NULL'
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input4
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /class/input/input5
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>ACPI: Power Button (CM) [PWRB]
>intel_rng: FWH not detected
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ACPI: AC Adapter [ACAD] (on-line)
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:05:01.0 to 64
>eth0: RealTek RTL8139 at 0xe08aa000, 00:1b:38:08:ad:07, IRQ 21
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2dmpr
>ipw3945: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iTCO_vendor_support: vendor-support=0
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ACPI: Battery Slot [BAT1] (battery present)
>rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:08 failed with error -16
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>Yenta: CardBus bridge found at 0000:05:04.0 [17aa:2075]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:05:04.0, mfunc 0x01111c12, devctl 0x44
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>cs: IO port probe 0x2000-0x2fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff
>PCI: Enabling device 0000:05:06.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:05:06.0 to 64
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[d0100800-d0100fff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ALSA sound/pci/hda/patch_si3054.c:244: si3054: cannot initialize. EXT MID = 0000
>ALSA sound/pci/hda/patch_si3054.c:256: Link Frame Detect(FDT) is not ready (line status: 0000)
>sdhci: SDHCI controller found at 0000:05:06.1 [1180:0822] (rev 19)
>PCI: Enabling device 0000:05:06.1 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:05:06.1[B] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:05:06.1 to 64
>mmc0: SDHCI at 0xd0100400 irq 19 DMA
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>Adding 514072k swap on /dev/sda2.  Priority:-1 extents:1 across:514072k
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f77ab400713]
>ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>REISERFS (device sda4): found reiserfs format "3.6" with standard journal
>REISERFS (device sda4): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda4): checking transaction log (sda4)
>REISERFS (device sda4): Using r5 hash to sort names
>AppArmor: AppArmor initialized
>audit(1202748977.053:2):  type=1505 info="AppArmor initialized" pid=2117
>powernow: This module only works with AMD K7 CPUs
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (4023 buckets, 32184 max)
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>audit(1202748993.611:3): audit_backlog_limit=320 old=64 by auid=4294967295 res=1
>audit(1202748993.611:4): audit_pid=3051 old=0 by auid=4294967295
>bootsplash: status on console 0 changed to on
>NET: Registered protocol family 17
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>ieee80211_crypt: registered algorithm 'TKIP'
>usb 2-1: new low speed USB device using uhci_hcd and address 3
>usb 2-1: new device found, idVendor=0458, idProduct=002e
>usb 2-1: new device strings: Mfr=2, Product=1, SerialNumber=0
>usb 2-1: Product: NetScroll + Traveler
>usb 2-1: Manufacturer: Genius
>usb 2-1: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver hiddev
>input: Genius NetScroll + Traveler as /class/input/input6
>input: USB HID v1.10 Mouse [Genius NetScroll + Traveler] on usb-0000:00:1d.0-1
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>martian source 255.255.255.255 from 192.168.178.1, on dev eth1
>ll header: ff:ff:ff:ff:ff:ff:00:1c:4a:78:49:45:08:00
>martian source 255.255.255.255 from 192.168.178.1, on dev eth1
>ll header: ff:ff:ff:ff:ff:ff:00:1c:4a:78:49:45:08:00
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=266 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=246
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=381 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=361
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=381 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=361
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=381 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=361
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=351 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=331
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=184 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=164
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=184 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=164
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=394 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=374
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=184 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=164
>eth1: no IPv6 routers present
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:1c:4a:78:49:45:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=47024 DF OPT (94040000) PROTO=2
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:1c:4a:78:49:45:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=47025 DF OPT (94040000) PROTO=2
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:1c:4a:78:49:45:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=47026 DF OPT (94040000) PROTO=2
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:1c:4a:78:49:45:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=47027 DF OPT (94040000) PROTO=2
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.178.21 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:1c:4a:78:49:45:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=47030 DF OPT (94040000) PROTO=2
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:1c:4a:78:49:45:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=47032 DF OPT (94040000) PROTO=2
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:1c:4a:78:49:45:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=47035 DF OPT (94040000) PROTO=2

Actions: View

Attachments on bug 304162: 160568 | 160697 | 160698 | 194256 | 194257 | 194264 | 194269 | 194471