Attachment 197497 Details for Bug 345866

xen boot.msg file

boot.msg-2.6.22.17-0.1-xen.txt (text/plain), 32.95 KB, created by Henry Laurent on 2008-02-27 18:03:15 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Henry Laurent

Created: 2008-02-27 18:03:15 UTC

Size: 32.95 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.22.17-0.1-xenpae
>Loaded 24972 symbols from /boot/System.map-2.6.22.17-0.1-xenpae.
>Symbols match kernel version 2.6.22.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.22.17-0.1-xenpae (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC
><6>Reserving virtual address space above 0xf5800000
><6>BIOS-provided physical RAM map:
><4> Xen: 0000000000000000 - 0000000076f91000 (usable)
><5>1175MB HIGHMEM available.
><5>728MB LOWMEM available.
><7>Entering add_active_range(0, 0, 487313) 0 entries of 256 used
><4>Zone PFN ranges:
><4>  DMA             0 ->   186368
><4>  Normal     186368 ->   186368
><4>  HighMem    186368 ->   487313
><4>early_node_map[1] active PFN ranges
><4>    0:        0 ->   487313
><7>On node 0 totalpages: 487313
><7>  DMA zone: 1456 pages used for memmap
><7>  DMA zone: 0 pages reserved
><7>  DMA zone: 184912 pages, LIFO batch:31
><7>  Normal zone: 0 pages used for memmap
><7>  HighMem zone: 2351 pages used for memmap
><7>  HighMem zone: 298594 pages, LIFO batch:31
><6>found SMP MP-table at 000fe710
><6>DMI 2.3 present.
><4>ACPI: RSDP 000FDC80, 0014 (r0 DELL  )
><4>ACPI: RSDT 000FDC94, 0030 (r1 DELL   PE2500          1 MSFT  100000A)
><4>ACPI: FACP 000FDCC4, 0074 (r1 DELL   PE2500          1 MSFT  100000A)
><4>ACPI: DSDT 7FFF0000, 2C0F (r1 DELL   PE2500          1 MSFT  100000A)
><4>ACPI: FACS 7FFFFC00, 0040
><4>ACPI: APIC 000FDD38, 0060 (r1 DELL   PE2500          1 MSFT  100000A)
><4>ACPI: SPCR 000FDD98, 0050 (r1 DELL   PE2500          1 MSFT  100000A)
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15
><6>ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16])
><4>IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31
><7>ACPI: IRQ9 used by override.
><6>Using ACPI (MADT) for SMP configuration information
><4>Allocating PCI resources starting at 80000000 (gap: 7ffff000:7ec01000)
><4>Built 1 zonelists.  Total pages: 483506
><5>Kernel command line: root=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 vga=0x317 resume=/dev/sda2 splash=silent
><6>bootsplash: silent mode.
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 16384 bytes)
><6>Xen reported: 1130.452 MHz processor.
><4>Console: colour VGA+ 80x50
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Software IO TLB enabled: 
><4> Aperture:     2 megabytes
><4> Kernel range: c21ab000 - c23ab000
><4> Address size: 24 bits
><4>vmalloc area: ee000000-f51fe000, maxmem 2d800000
><6>Memory: 1906544k/1949252k available (1790k kernel code, 33540k reserved, 744k data, 176k init, 1203780k highmem)
><4>virtual kernel memory layout:
><4>    fixmap  : 0xf5537000 - 0xf57ff000   (2848 kB)
><4>    pkmap   : 0xf5200000 - 0xf5400000   (2048 kB)
><4>    vmalloc : 0xee000000 - 0xf51fe000   ( 113 MB)
><4>    lowmem  : 0xc0000000 - 0xed800000   ( 728 MB)
><4>      .init : 0xc037f000 - 0xc03ab000   ( 176 kB)
><4>      .data : 0xc02bfbea - 0xc0379c78   ( 744 kB)
><4>      .text : 0xc0100000 - 0xc02bfbea   (1790 kB)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 2262.70 BogoMIPS (lpj=4525400)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: 0383d3f1 00000000 00000000 00000000 00000000 00000000 00000000
><6>CPU: L1 I cache: 16K, L1 D cache: 16K
><6>CPU: L2 cache: 512K
><7>CPU: After all inits, caps: 0383d3f1 00000000 00000000 00000040 00000000 00000000 00000000
><4>Compat vDSO mapped to f57fe000.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 8628k freed
><6>ACPI: Core revision 20070126
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 366 Objects with 41 Devices 128 Methods 9 Regions
><4> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><4>ENABLING IO-APIC IRQs
><6>SMP alternatives: switching to SMP code
><6>Brought up 2 CPUs
><6>Initializing CPU#1
><4>migration_cost=1538
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: Using configuration type 1
><4>Setting up standard PCI resources
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 20 to 3F [_GPE] 4 regs on int 0x9
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 1 Runtime GPEs in this block
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 1 Wake, Enabled 0 Runtime GPEs in this block
><7>ACPI: EC: Look up EC in DSDT
><4>Completing Region/Field/Buffer/Package initialization:..................................
><4>Initialized 6/9 Regions 0/0 Fields 17/17 Buffers 11/12 Packages (375 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:
><4>Executed 0 _INI methods requiring 0 _STA executions (examined 45 objects)
><6>ACPI: Interpreter enabled
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><4>PCI: Firmware left 0000:00:04.0 e100 interrupts enabled, disabling
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><6>ACPI: PCI Root Bridge [PCI1] (0000:01)
><7>PCI: Probing PCI hardware (bus 01)
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I960._PRT]
><6>ACPI: PCI Root Bridge [PCI2] (0000:03)
><7>PCI: Probing PCI hardware (bus 03)
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
><4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14)
><4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 *5 6 7 9 10 11 12 14)
><4>ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 10 *11 12 14)
><4>ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
><4>ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 7 *10 11 12 14)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 15 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>xen_mem: Initialising balloon driver.
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>ACPI: RTC can wake from S4
><6>pnp: 00:0b: ioport range 0x814-0x85b has been reserved
><6>pnp: 00:0b: ioport range 0x8a0-0x8af has been reserved
><6>pnp: 00:0b: ioport range 0xc00-0xcd7 has been reserved
><6>pnp: 00:0b: ioport range 0xf50-0xf58 has been reserved
><6>pnp: 00:0c: iomem range 0x0-0x0 could not be reserved
><6>pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
><6>pnp: 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
><6>pnp: 00:0c: iomem range 0xf0000-0xfffff could not be reserved
><6>Time: xen clocksource has been installed.
><6>PCI: Bridge: 0000:01:02.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
><4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>audit: initializing netlink socket (disabled)
><5>audit(1204127648.036:1): initialized
><4>highmem bounce pool size: 64 pages
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>Boot video device is 0000:00:0e.0
><6>Real Time Clock Driver v1.12ac
><6>Floppy drive(s): fd0 is 1.44M
><4>floppy0: Unable to grab DMA2 for the floppy driver
><6>FDC 0 is a National Semiconductor PC87306
><4>Event-channel device installed.
><6>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><6>input: PC Speaker as /class/input/input1
><6>NET: Registered protocol family 1
><4>Using IPI No-Shortcut mode
><6>Freeing unused kernel memory: 176k freed
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><5>SCSI subsystem initialized
><6>ACPI: PCI Interrupt 0000:01:0e.0[A] -> GSI 24 (level, low) -> IRQ 16
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><4>ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 10
><6>ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LUSB] -> GSI 10 (level, low) -> IRQ 10
><6>ohci_hcd 0000:00:0f.2: OHCI Host Controller
><6>ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
><6>ohci_hcd 0000:00:0f.2: irq 10, io mem 0xfe200000
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: OHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.22.17-0.1-xenpae ohci_hcd
><6>usb usb1: SerialNumber: 0000:00:0f.2
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>usb 1-2: new low speed USB device using ohci_hcd and address 2
><6>usb 1-2: new device found, idVendor=05f3, idProduct=0203
><6>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 1-2: Product: PC Keyboard/Mouse to USB  Adapter
><6>usb 1-2: Manufacturer: P.I. Engineering
><6>usb 1-2: configuration #1 chosen from 1 choice
><6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
><4>        <Adaptec 3960D Ultra160 SCSI adapter>
><4>        aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
><4>
><5>scsi 0:0:0:0: Direct-Access     SEAGATE  ST336706LC       8A03 PQ: 0 ANSI: 3
><4>scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
><6> target0:0:0: Beginning Domain Validation
><6> target0:0:0: wide asynchronous
><6> target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
><6> target0:0:0: Ending Domain Validation
><5>scsi 0:0:1:0: Direct-Access     SEAGATE  ST336706LC       8A03 PQ: 0 ANSI: 3
><4>scsi0:A:1:0: Tagged Queuing enabled.  Depth 32
><6> target0:0:1: Beginning Domain Validation
><6> target0:0:1: wide asynchronous
><6> target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
><6> target0:0:1: Ending Domain Validation
><5>scsi 0:0:6:0: Processor         DELL     1x6 U2W SCSI BP  1.29 PQ: 0 ANSI: 2
><6> target0:0:6: Beginning Domain Validation
><6> target0:0:6: Ending Domain Validation
><6>ACPI: PCI Interrupt 0000:01:0e.1[B] -> GSI 23 (level, low) -> IRQ 17
><6>scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
><4>        <Adaptec 3960D Ultra160 SCSI adapter>
><4>        aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
><4>
><5>scsi 1:0:0:0: Direct-Access     transtec PROVIGO 510S     0215 PQ: 0 ANSI: 4
><4>scsi1:A:0:0: Tagged Queuing enabled.  Depth 32
><6> target1:0:0: Beginning Domain Validation
><6> target1:0:0: wide asynchronous
><6> target1:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
><6> target1:0:0: Ending Domain Validation
><5>sd 0:0:0:0: [sda] 71132959 512-byte hardware sectors (36420 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 9f 00 10 08
><5>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
><5>sd 0:0:0:0: [sda] 71132959 512-byte hardware sectors (36420 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 9f 00 10 08
><5>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
><6> sda: sda1 sda2 sda3
><5>sd 0:0:0:0: [sda] Attached SCSI disk
><5>sd 0:0:1:0: [sdb] 71132959 512-byte hardware sectors (36420 MB)
><5>sd 0:0:1:0: [sdb] Write Protect is off
><7>sd 0:0:1:0: [sdb] Mode Sense: 9f 00 10 08
><5>sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
><5>sd 0:0:1:0: [sdb] 71132959 512-byte hardware sectors (36420 MB)
><5>sd 0:0:1:0: [sdb] Write Protect is off
><7>sd 0:0:1:0: [sdb] Mode Sense: 9f 00 10 08
><5>sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
><6> sdb: sdb1 sdb2
><5>sd 0:0:1:0: [sdb] Attached SCSI disk
><5>sd 1:0:0:0: [sdc] 3404296448 1024-byte hardware sectors (3486000 MB)
><5>sd 1:0:0:0: [sdc] Write Protect is off
><7>sd 1:0:0:0: [sdc] Mode Sense: a7 00 10 08
><5>sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
><5>sd 1:0:0:0: [sdc] 3404296448 1024-byte hardware sectors (3486000 MB)
><5>sd 1:0:0:0: [sdc] Write Protect is off
><7>sd 1:0:0:0: [sdc] Mode Sense: a7 00 10 08
><5>sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
><6> sdc: unknown partition table
><5>sd 1:0:0:0: [sdc] Attached SCSI disk
><6>usbcore: registered new interface driver hiddev
><6>input: P.I. Engineering PC Keyboard/Mouse to USB  Adapter as /class/input/input2
><6>input: USB HID v1.00 Keyboard [P.I. Engineering PC Keyboard/Mouse to USB  Adapter] on usb-0000:00:0f.2-2
><6>input: P.I. Engineering PC Keyboard/Mouse to USB  Adapter as /class/input/input3
><6>input: USB HID v1.00 Mouse [P.I. Engineering PC Keyboard/Mouse to USB  Adapter] on usb-0000:00:0f.2-2
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><5>REISERFS (device sda3): found reiserfs format "3.6" with standard journal
><5>REISERFS (device sda3): using ordered data mode
><4>reiserfs: using flush barriers
><5>REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device sda3): checking transaction log (sda3)
><5>REISERFS (device sda3): Using r5 hash to sort names
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>sd 0:0:1:0: Attached scsi generic sg1 type 0
><5>scsi 0:0:6:0: Attached scsi generic sg2 type 3
><5>sd 1:0:0:0: Attached scsi generic sg3 type 0
><6>Linux agpgart interface v0.102 (c) Dave Jones
><3>agpgart: unable to determine aperture size.
><6>agpgart: agp_backend_initialize() failed.
><4>agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
><3>agpgart: unable to determine aperture size.
><6>agpgart: agp_backend_initialize() failed.
><4>agpgart-serverworks: probe of 0000:00:00.1 failed with error -22
><3>agpgart: ServerWorks CNB20HE is unsupported due to lack of documentation.
><3>agpgart: ServerWorks CNB20HE is unsupported due to lack of documentation.
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>parport_pc 00:09: reported by Plug and Play ACPI
><6>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
><4>parport0: dma 1 in use, resorting to PIO operation
><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
><6>input: Power Button (FF) as /class/input/input4
><6>ACPI: Power Button (FF) [PWRF]
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1
><6>SvrWks OSB4: chipset revision 0
><6>SvrWks OSB4: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio
><6>    ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:pio, hdd:pio
><7>Probing IDE interface ide0...
><6>rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
><4>rtc_cmos: probe of 00:0a failed with error -16
><6>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
><6>e100: Copyright(c) 1999-2006 Intel Corporation
><6>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><4>hda: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive
><7>hda: selected mode 0x22
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><7>Probing IDE interface ide1...
><6>piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
><3>piix4_smbus 0000:00:0f.0: Host SMBus controller not enabled!
><6>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 18
><6>e100: eth0: e100_probe: addr 0xfe202000, irq 18, MAC addr 00:06:5B:3C:3A:FC
><7>libata version 3.00 loaded.
><6>hda: ATAPI 24X DVD-ROM drive, 128kB Cache, (U)DMA
><6>Uniform CD-ROM driver Revision: 3.20
><6>Adding 4200988k swap on /dev/sda2.  Priority:-1 extents:1 across:4200988k
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>loop: module loaded
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>AppArmor: AppArmor initialized
><5>audit(1204127677.133:2):  type=1505 info="AppArmor initialized" pid=1981
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Wed Feb 27 15:54:08 2008
>
>Creating device nodes with udev
>Trying manual resume from /dev/sda2
>Trying manual resume from /dev/sda2
>Waiting for device /dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 to appear:  ok
>fsck 1.40.2 (12-Jul-2007)
>[/sbin/fsck.reiserfs (1) -- /] fsck.reiserfs -a /dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 
>Reiserfs super block in block 16 on 0x803 of format 3.6 with standard journal
>Blocks (total/free): 7799552/7391805 by 4096 bytes
>Filesystem is clean
>Replaying journal: 
>Replaying journal: Done.
>
>Reiserfs journal '/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..  ^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^Hfinished
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Feb 27 16:54:31 2008
>
>done
>Starting udevd udevd-event[1748]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it
>
>done
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>donemount: according to mtab, /dev/sda3 is already mounted on /
>
>Activating device mapper...
>done
>Checking file systems...
>fsck 1.40.2 (12-Jul-2007)
>/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part1: clean, 88/40160 files, 54926/160616 blocks
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda1 on /boot type ext3 (rw,acl,user_xattr)
>doneConfiguring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
>Configured serial ports
>doneActivating remaining swap-devices in /etc/fstab...
>doneMounting securityfs on /sys/kernel/security done
>Loading AppArmor module done
>Loading AppArmor profiles <notice>killproc: kill(1108,29)
>Creating /var/log/boot.msg
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>Setting up the hardware clockdone
>done
>Setting up hostname 'xen1'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>Can't determine current runlevel
>done
>System Boot Control: The system has been set up
>Skipped features: boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(1108,3)
>
>Boot logging started on /dev/tty1(/dev/console) at Wed Feb 27 16:54:39 2008
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>Starting D-Bus daemonUnknown username "gdm" in message bus configuration file
>done
>
>INIT: Entering runlevel: 5
>
>
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>Starting resource managerdone
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/ resume=/dev/sda2 PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/ resume=/dev/sda2 PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog services.done
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/sbin/acpid ]
>Starting acpid done
><notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
>Starting ConsoleKitdone
><notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>Starting HAL daemondone
>Loading CPUFreq modules (CPUFreq not supported)
>Loading keymap i386/azerty/fr-latin1.map.gz
>doneLoading compose table latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>done<notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
>Initializing random number generatordone
>Starting irqbalance done
>Checking/updating CPU microcode done
>Setting up network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>done    eth0      device: Intel Corporation 82557/8/9 Ethernet Pro 100 (rev 08)
>    eth0      IP address: 193.48.45.14/24   
>Checking for network time protocol daemon (NTPD): unused
>doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
><notice>startproc: execve (/usr/bin/xdm) [ /usr/bin/xdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= LANG=fr_FR.UTF-8 PREVLEVEL=N LINES=50 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME= WINDOWMANAGER=/usr/bin/twm splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/bin/xdm ]
>Starting service xdmdone
><notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/sbin/auditd ]
>Starting auditd done
><notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
>Starting Avahi daemon.<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Starting cupsddone
>done
><notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
>Starting SSH daemondone
>Starting Avahi DNS Configuration daemon<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
>done
>Try to get initial date and time via NTP from  193.48.45.1done
>Starting network time protocol daemon (NTPD)done
>Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>done
><notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
>Starting powersaved: done
>Starting mail service (Postfix)Starting xend <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
><notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
><notice>checkproc: /usr/sbin/ntpd 3135
><notice>killproc: kill(3135,15)
><notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 DONT_USE_SYSLOG=no REDIRECT=/dev/tty1 COLUMNS=80 INTERFACETYPE=eth PATH=/sbin:/usr/sbin:/bin/:/usr/bin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/etc/sysconfig/network resume=/dev/sda2 LANG=POSIX PREVLEVEL=N LINES=50 SHLVL=7 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
>done
>done
>Starting CRON daemondone
>Starting smartd done
><notice>startproc: execve (/usr/sbin/libvirtd) [ /usr/sbin/libvirtd -d ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 resume=/dev/sda2 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SSEAGATE_ST336706LC_3FD0KSYL00007230AM0H-part3 _=/sbin/startproc DAEMON=/usr/sbin/libvirtd ]
>Starting xendomainsunused
>Starting libvirtd done
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: splash xendomains
><notice>killproc: kill(2134,3)

Actions: View

Attachments on bug 345866: 185816 | 189700 | 189701 | 189705 | 197497 | 197498