Attachment 202825 Details for Bug 372199

dmesg output

dmesg.txt (text/plain), 26.91 KB, created by Magnus Boman on 2008-03-19 00:11:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Magnus Boman

Created: 2008-03-19 00:11:12 UTC

Size: 26.91 KB

patch

obsolete

>Linux version 2.6.25-rc5-git3-6-default (geeko@buildhost) (gcc version 4.3.0 (SUSE Linux) ) #1 SMP 2008-03-14 16:14:49 +0100
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
> BIOS-e820: 000000007fed0000 - 000000007fee5000 (ACPI data)
> BIOS-e820: 000000007fee5000 - 000000007ff00000 (ACPI NVS)
> BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009f000 for 1024 bytes.
>Entering add_active_range(0, 0, 523984) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   523984
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   523984
>On node 0 totalpages: 523984
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2301 pages used for memmap
>  HighMem zone: 292307 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6C00, 0024 (r2 IBM   )
>ACPI: XSDT 7FED6FE7, 005C (r1 IBM    TP-1Y        1290  LTP        0)
>ACPI: FACP 7FED7100, 00F4 (r3 IBM    TP-1Y        1290 IBM         1)
>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
>ACPI: DSDT 7FED72E7, DB15 (r1 IBM    TP-1Y        1290 MSFT  100000E)
>ACPI: FACS 7FEF6000, 0040
>ACPI: SSDT 7FED72B4, 0033 (r1 IBM    TP-1Y        1290 MSFT  100000E)
>ACPI: ECDT 7FEE4DFC, 0052 (r1 IBM    TP-1Y        1290 IBM         1)
>ACPI: TCPA 7FEE4E4E, 0032 (r1 IBM    TP-1Y        1290 PTL         1)
>ACPI: APIC 7FEE4E80, 005A (r1 IBM    TP-1Y        1290 IBM         1)
>ACPI: MCFG 7FEE4EDA, 003C (r1 IBM    TP-1Y        1290 IBM         1)
>ACPI: BOOT 7FEE4FD8, 0028 (r1 IBM    TP-1Y        1290  LTP        1)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
>PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519891
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_HTS721080G9AT00_MPC4B2Y4GRJV4E-part5 resume=/dev/sda2 splash=silent clock=pit
>bootsplash: silent mode.
>Warning! clock= boot option is deprecated. Use clocksource=xyz
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2261.216 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2068716k/2095936k available (1940k kernel code, 25908k reserved, 1625k data, 260k init, 1178432k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffdf2000 - 0xfffff000   (2100 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0483000 - 0xc04c4000   ( 260 kB)
>      .data : 0xc02e5224 - 0xc047b96c   (1625 kB)
>      .text : 0xc0100000 - 0xc02e5224   (1940 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>Calibrating delay using timer specific routine.. 4527.42 BogoMIPS (lpj=9054842)
>Security Framework initialized
>AppArmor: AppArmor initialized
>AppArmor: Unable to log event (1505) to audit subsys
>AppArmor: Registered secondary security module name="capability"
>AppArmor: Unable to log event (1505) to audit subsys
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 17k freed
>Unpacking initramfs... done
>Freeing initrd memory: 4198k freed
>ACPI: Core revision 20070126
>ACPI: Checking initramfs for custom DSDT
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 1559 Objects with 74 Devices 442 Methods 24 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 1 Objects with 0 Devices 1 Methods 0 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>CPU0: Intel(R) Pentium(R) M processor 2.26GHz stepping 08
>Total of 1 processors activated (4527.42 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1
>Setting up standard PCI resources
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 1 Runtime GPEs in this block
>ACPI: EC: EC description table is found, configuring boot EC
>Completing Region/Field/Buffer/Package initialization:...................................................................................................................................................................................................................................................................................
>Initialized 23/24 Regions 129/129 Fields 73/73 Buffers 50/62 Packages (1569 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:...<6>ACPI: EC: non-query interrupt received, switching to interrupt mode
>....
>Executed 7 _INI methods requiring 2 _STA executions (examined 78 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnpacpi: exceeded the max number of mem resources: 12
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
>system 00:00: iomem range 0xcc000-0xcffff could not be reserved
>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0xdc000-0xdffff has been reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>Time: tsc clocksource has been installed.
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x1641 has been reserved
>system 00:02: ioport range 0x1644-0x167f has been reserved
>system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:02: iomem range 0xf0008000-0xf000bfff could not be reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 3000-3fff
>  MEM window: 0xb0100000-0xb01fffff
>  PREFETCH window: 0x00000000c0000000-0x00000000c7ffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: 0xb0200000-0xb02fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: 4000-4fff
>  MEM window: 0xb2000000-0xb3ffffff
>  PREFETCH window: 0x00000000c8000000-0x00000000c80fffff
>PCI: Bus 12, cardbus bridge: 0000:0b:00.0
>  IO window: 0x00005000-0x000050ff
>  IO window: 0x00005400-0x000054ff
>  PREFETCH window: 0xd0000000-0xd3ffffff
>  MEM window: 0xb8000000-0xbbffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-8fff
>  MEM window: 0xb4000000-0xbfffffff
>  PREFETCH window: 0x00000000d0000000-0x00000000d7ffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x35 set to 0x1
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1205884979.396:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial 00:0a: activated
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 23
>ACPI: PCI interrupt for device 0000:00:1e.3 disabled
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 1436k
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU] (supports 8 throttling states)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (60 C)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci: probe of 0000:00:1f.2 failed with error -22
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>Switched to high resolution mode on CPU 0
>Marking TSC unstable due to: TSC halts in idle.
>Time: hpet clocksource has been installed.
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>ata1.00: ATA-6: HTS721080G9AT00, MC4IA51A, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA 
>ata1.00: applying bridge limits
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
>ata1.00: configured for UDMA/100
>Clocksource tsc unstable (delta = -642500566 ns)
>ata2.00: ATAPI: MATSHITADVD-RAM UJ-822S, 1.61, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      HTS721080G9AT00  MC4I PQ: 0 ANSI: 5
>scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-822S  1.61 PQ: 0 ANSI: 5
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-rc5-git3-6-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
> sda9 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-rc5-git3-6-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-rc5-git3-6-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-rc5-git3-6-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0000000
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-rc5-git3-6-default ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>PM: Starting manual resume from disk
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Non-volatile memory driver v1.2
>iTCO_vendor_support: vendor-support=0
>input: Power Button (FF) as /devices/virtual/input/input3
>ieee80211_crypt: registered algorithm 'NULL'
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/virtual/input/input4
>Driver 'sr' needs updating - please use bus_type methods
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/virtual/input/input5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>parport_pc 00:0b: reported by Plug and Play ACPI
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>tg3.c:v3.87 (December 20, 2007)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ACPI: Sleep Button (CM) [SLPB]
>eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:58:0a:af:cf
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>eth0 renamed to eth1
>udev: renamed network interface eth0 to eth1
>NET: Registered protocol family 23
>nsc-ircc 00:0c: activated
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: No dongle connected
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
>ACPI: AC Adapter [AC] (on-line)
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:0b:02.0[A] -> GSI 21 (level, low) -> IRQ 21
>ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
>ACPI: Battery Slot [BAT0] (battery present)
>Linux agpgart interface v0.103
>ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
>ipw2200: Unable to load firmware: -2
>ipw2200: failed to register network device
>ACPI: PCI interrupt for device 0000:0b:02.0 disabled
>ipw2200: probe of 0000:0b:02.0 failed with error -5
>Yenta: CardBus bridge found at 0000:0b:00.0 [1014:056c]
>thinkpad_acpi: ThinkPad ACPI Extras v0.19
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 1YET65WW (1.29 ), EC 1YHT28WW-1.05
>thinkpad_acpi: IBM ThinkPad T43p
>thinkpad_acpi: another device driver is already handling bay events
>thinkpad_acpi: disabling subdriver bay
>thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode
>input: ThinkPad Extra Buttons as /devices/virtual/input/input6
>Yenta: ISA IRQ mask 0x0430, PCI irq 16
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff
>cs: IO port probe 0x5000-0x8fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xb4000000 - 0xbfffffff
>pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>intel8x0_measure_ac97_clock: measured 55535 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1e.3 to 64
>ALSA sound/pci/ac97/ac97_codec.c:2152: MC'97 1 converters and GPIO not ready (0xff00)
>uhci_hcd 0000:00:1d.2: Unlink after no-IRQ?  Controller is probably using the wrong IRQ.
>usb 3-1: device descriptor read/64, error -110
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>usb 3-1: device descriptor read/64, error -110
>usb 3-1: new full speed USB device using uhci_hcd and address 3
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>Adding 1052248k swap on /dev/sda2.  Priority:-1 extents:1 across:1052248k
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>usb 3-1: device descriptor read/64, error -110
>powernow: This module only works with AMD K7 CPUs
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 17
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>tg3: eth1: Link is up at 100 Mbps, full duplex.
>tg3: eth1: Flow control is off for TX and off for RX.
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>usb 3-1: device descriptor read/64, error -110
>usb 3-1: new full speed USB device using uhci_hcd and address 4
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>usb 3-1: device descriptor read/8, error -110
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>usb 3-1: device descriptor read/8, error -110
>usb 3-1: new full speed USB device using uhci_hcd and address 5
>usb 3-1: device descriptor read/8, error -110
>usb 3-1: device descriptor read/8, error -110
>usb 3-2: new full speed USB device using uhci_hcd and address 6
>usb 3-2: configuration #1 chosen from 1 choice
>usb 3-2: New USB device found, idVendor=0483, idProduct=2016
>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-2: Product: Biometric Coprocessor
>usb 3-2: Manufacturer: STMicroelectronics
>usb 2-1: new low speed USB device using uhci_hcd and address 3
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: New USB device found, idVendor=413c, idProduct=3200
>usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>usb 2-1: Product: Dell USB Mouse
>usb 2-1: Manufacturer: Dell
>usbcore: registered new interface driver hiddev
>input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input7
>input,hidraw0: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.1-1
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>[drm] Loading R300 Microcode

Actions: View

Attachments on bug 372199: 202825 | 208960 | 216368