Attachment 205287 Details for Bug 368449

dmesg

dmesg.txt (text/plain), 29.59 KB, created by Evgeny Bobkin on 2008-04-01 10:27:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Evgeny Bobkin

Created: 2008-04-01 10:27:30 UTC

Size: 29.59 KB

patch

obsolete

>Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC
>Command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHY2250_K42XT79255P9-part6 vga=0x314 resume=/dev/sda5 splash=silent
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
> BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 523984) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F6E10, 0024 (r2 PTLTD )
>ACPI: XSDT 7FED7524, 009C (r1 SECCSD LH43STAR  6040000  LTP        0)
>ACPI: FACP 7FEDFB9A, 00F4 (r3 INTEL  CRESTLNE  6040000 ALAN        1)
>ACPI: DSDT 7FED94FC, 662A (r2 INTEL  CRESTLNE  6040000 INTL 20050624)
>ACPI: FACS 7FEE2FC0, 0040
>ACPI: APIC 7FEDFC8E, 0068 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>ACPI: HPET 7FEDFCF6, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>ACPI: MCFG 7FEDFD2E, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>ACPI: TCPA 7FEDFD6A, 0032 (r1 Intel   CRESTLN  6040000          5A52)
>ACPI: TMOR 7FEDFD9C, 0026 (r1 PTLTD            6040000 PTL         3)
>ACPI: APIC 7FEDFDC2, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: HPET 7FEDFE2A, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
>ACPI: BOOT 7FEDFE62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: SLIC 7FEDFE8A, 0176 (r1 SECCSD LH43STAR  6040000  LTP        0)
>ACPI: SSDT 7FED8EAD, 064F (r1 SataRe  SataPri     1000 INTL 20050624)
>ACPI: SSDT 7FED881B, 0692 (r1 SataRe  SataSec     1000 INTL 20050624)
>ACPI: SSDT 7FED7B4C, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
>ACPI: SSDT 7FED7AA6, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)
>ACPI: SSDT 7FED75C0, 04E6 (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fed0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 523984) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007fed0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   523984
>On node 0 totalpages: 523887
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1271 pages reserved
>  DMA zone: 2672 pages, LIFO batch:0
>  DMA32 zone: 7107 pages used for memmap
>  DMA32 zone: 512781 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
>swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
>swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000dc000
>swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 50296 bytes of per cpu data
>Built 1 zonelists.  Total pages: 515453
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHY2250_K42XT79255P9-part6 vga=0x314 resume=/dev/sda5 splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 2194.510 MHz processor.
>Console: colour dummy device 80x25
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2057208k/2095936k available (2053k kernel code, 38340k reserved, 1017k data, 316k init)
>Calibrating delay using timer specific routine.. 4394.05 BogoMIPS (lpj=8788109)
>Security Framework v1.0.0 initialized
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>Unpacking initramfs... done
>Freeing initrd memory: 4375k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 920 Objects with 75 Devices 243 Methods 37 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 10 Objects with 3 Devices 4 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0003) - 10 Objects with 3 Devices 4 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0004) - 7 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0005) - 4 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0006) - 13 Objects with 0 Devices 4 Methods 0 Regions
> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>result 12468797
>Detected 12.468 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4389.17 BogoMIPS (lpj=8778345)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0a
>Brought up 2 CPUs
>migration_cost=18
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - efffffff
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 3 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:........................................................................
>Initialized 35/37 Regions 0/0 Fields 24/24 Buffers 13/21 Packages (973 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:<4>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: Please test with "acpi_osi=!Linux"
>Please send dmidecode to linux-acpi@vger.kernel.org
>.......
>Executed 7 _INI methods requiring 0 _STA executions (examined 87 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *10
>ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
>ACPI: Power Resource [FN00] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>pnp: 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
>PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: cc000000-ceffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: f0300000-f03fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: 3000-3fff
>  MEM window: f0200000-f02fffff
>  PREFETCH window: 88000000-880fffff
>PCI: Bus 6, cardbus bridge: 0000:05:09.0
>  IO window: 00001400-000014ff
>  IO window: 00004000-000040ff
>  PREFETCH window: 8c000000-8fffffff
>  MEM window: 90000000-93ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: f0400000-f04fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>Time: hpet clocksource has been installed.
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x36 set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1207046978.788:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie02]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>vesafb: framebuffer at 0xcd000000, mapped to 0xffffc20010b80000, using 3750k, total 14336k
>vesafb: mode is 800x600x16, linelength=1600, pages=2
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 78734 bytes
>bootsplash: ...found (800x600, 27773 bytes, v3).
>Console: switching to colour frame buffer device 96x33
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>NET: Registered protocol family 1
>Freeing unused kernel memory: 316k freed
>ACPI: SSDT 7FED842B, 0328 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 0078) - 6 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: SSDT 7FED7DAB, 05FB (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 0079) - 1 Objects with 0 Devices 1 Methods 0 Regions
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI: SSDT 7FED8753, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 007D) - 4 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: SSDT 7FED83A6, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 007E) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 2 throttling states)
>ACPI: Thermal Zone [TZ00] (31 C)
>ACPI: Thermal Zone [TZ01] (31 C)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.11
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000118e0 irq 14
>ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000118e8 irq 15
>ata1.00: ATA-8: FUJITSU MHY2250BH, 0000000B, max UDMA/100
>ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: TSSTcorp CDDVDW TS-L632H, SC03, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHY2250B 0000 PQ: 0 ANSI: 5
>scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632H  SC03 PQ: 0 ANSI: 5
>ACPI: Transitioning device [FAN0] to D3
>ACPI: Transitioning device [FAN0] to D3
>ACPI: Fan [FAN0] (off)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
> sda7 >
>usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb usb2: SerialNumber: 0000:00:1a.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0504000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: EHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
>usb usb3: SerialNumber: 0000:00:1a.7
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0504400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: EHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
>usb usb4: SerialNumber: 0000:00:1d.7
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>usb 3-2: new high speed USB device using ehci_hcd and address 2
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
>usb usb6: new device found, idVendor=0000, idProduct=0000
>usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 3-2: new device found, idVendor=0ac8, idProduct=c302
>usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-2: Product: Vega USB 2.0 Camera.
>usb 3-2: Manufacturer: Vimicro Corp.
>usb 3-2: configuration #1 chosen from 1 choice
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
>usb usb7: new device found, idVendor=0000, idProduct=0000
>usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
>swsusp: Basic memory bitmaps created
>swsusp: Basic memory bitmaps freed
>Attempting manual resume
>usb 7-2: new full speed USB device using uhci_hcd and address 2
>usb 7-2: new device found, idVendor=0a5c, idProduct=2101
>usb 7-2: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 7-2: Product: BCM92045NMD
>usb 7-2: Manufacturer: Broadcom Corp
>usb 7-2: SerialNumber: 00027873C322
>usb 7-2: configuration #1 chosen from 1 choice
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
>ACPI: AC Adapter [ADP1] (off-line)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>sky2 0000:04:00.0: v1.14 addr 0xf0200000 irq 19 Yukon-EC Ultra (0xb4) rev 3
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>sky2 eth0: addr 00:13:77:5a:b4:f3
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ACPI: Battery Slot [BAT1] (battery present)
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:07 failed with error -16
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input4
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:05:09.1 [1180:0822] (rev 18)
>ACPI: PCI Interrupt 0000:05:09.1[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:05:09.1 to 64
>mmc0: SDHCI at 0xf0401000 irq 18 DMA
>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0s
>iwl4965: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>Linux video capture interface: v2.00
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2333: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2337:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2341:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2349:    inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0
>uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302)
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ALSA sound/pci/hda/patch_si3054.c:244: si3054: cannot initialize. EXT MID = 0000
>ALSA sound/pci/hda/patch_si3054.c:256: Link Frame Detect(FDT) is not ready (line status: 0000)
>nvidia: module license 'NVIDIA' taints kernel.
>Yenta: CardBus bridge found at 0000:05:09.0 [144d:c031]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 16
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#05) from #06 to #09
>pcmcia: parent PCI bridge Memory window: 0xf0400000 - 0xf04fffff
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.12  Thu Feb 14 17:51:09 PST 2008
>iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
>wmaster0: Selected rate control algorithm 'iwl-4965-rs'
>Adding 2104472k swap on /dev/sda5.  Priority:-1 extents:1 across:2104472k
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.8)
>AppArmor: AppArmor initialized
>audit(1207046992.572:2):  type=1505 info="AppArmor initialized" pid=2294
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>sky2 eth0: enabling interface
>sky2 eth0: ram buffer 0K
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>audit(1207039818.422:3): audit_pid=3177 old=0 by auid=4294967295
>NET: Registered protocol family 17
>bootsplash: status on console 0 changed to on
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:90:96:c0:92:77
>wlan0: RX authentication from 00:90:96:c0:92:77 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:90:96:c0:92:77
>wlan0: RX AssocResp from 00:90:96:c0:92:77 (capab=0x431 status=0 aid=3)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=374 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=354 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=260 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=240 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=374 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=354 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=374 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=354 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=170 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=150 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=170 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=150 
>wlan0: no IPv6 routers present
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.

Actions: View

Attachments on bug 368449: 203719 | 205287 | 205293 | 208035