Attachment 206387 Details for Bug 373128

dmesg - 2nd boot - both mem inserted

mem-2.txt (text/plain), 36.68 KB, created by Massimiliano Marsiglietti on 2008-04-05 14:53:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Massimiliano Marsiglietti

Created: 2008-04-05 14:53:57 UTC

Size: 36.68 KB

patch

obsolete

>Linux version 2.6.25-rc5-git3-6-default (geeko@buildhost) (gcc version 4.3.0 (SUSE Linux) ) #1 SMP 2008-03-14 16:14:49 +0100
>Command line: root=/dev/disk/by-label/root vga=0x31a resume=/dev/sda5 splash=silent
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
> BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 156) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.2 present.
>ACPI: RSDP 000F7930, 0014 (r0 Nvidia)
>ACPI: RSDT 7FFF3000, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FFF30C0, 4F33 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FFF0000, 0040
>ACPI: SSDT 7FFF8080, 00F7 (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: SRAT 7FFF8180, 0090 (r1 AMD    HAMMER          1 AMD         1)
>ACPI: APIC 7FFF8000, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: Node 0 PXM 0 0-a0000
>Entering add_active_range(0, 0, 156) 0 entries of 3200 used
>SRAT: Node 0 PXM 0 0-80000000
>Entering add_active_range(0, 0, 156) 1 entries of 3200 used
>Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
>NUMA: Using 63 for the hash shift.
>Bootmem setup node 0 0000000000000000-000000007fff0000
>  NODE_DATA [000000000000c000 - 0000000000013fff]
>  bootmap [0000000000014000 -  0000000000023fff] pages 10
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-8b6bc7] TEXT DATA BSS
>early res: 3 [37b5f000-37fef296] RAMDISK
>early res: 4 [9f800-a07ff] EBDA
>early res: 5 [8000-bfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      156
>    0:      256 ->   524272
>On node 0 totalpages: 524172
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1728 pages reserved
>  DMA zone: 2212 pages, LIFO batch:0
>  DMA32 zone: 7111 pages used for memmap
>  DMA32 zone: 513065 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009c000 - 000000000009d000
>PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>PERCPU: Allocating 50600 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515277
>Policy zone: DMA32
>Kernel command line: root=/dev/disk/by-label/root vga=0x31a resume=/dev/sda5 splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2210.077 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Node 0: aperture @ c0000000 size 256 MB
>Memory: 2056060k/2097088k available (2361k kernel code, 40628k reserved, 1925k data, 404k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>Calibrating delay using timer specific routine.. 4423.02 BogoMIPS (lpj=8846045)
>Security Framework initialized
>AppArmor: AppArmor initialized
>AppArmor: Unable to log event (1505) to audit subsys
>AppArmor: Registered secondary security module name="capability"
>AppArmor: Unable to log event (1505) to audit subsys
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>Unpacking initramfs... done
>Freeing initrd memory: 4672k freed
>ACPI: Core revision 20070126
>ACPI: Checking initramfs for custom DSDT
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 909 Objects with 95 Devices 319 Methods 36 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>APIC timer calibration result 12557251
>Detected 12.557 MHz APIC timer.
>Brought up 1 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000001
>  groups: 00000000,00000000,00000000,00000001
>net_namespace: 1016 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 20 to 5F [_GPE] 8 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 1 Runtime GPEs in this block
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:................................................................................................
>Initialized 32/36 Regions 9/9 Fields 36/36 Buffers 19/27 Packages (921 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:..
>Executed 2 _INI methods requiring 1 _STA executions (examined 100 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs *17)
>ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16)
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23)
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: Power Resource [ISAV] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnpacpi: exceeded the max number of mem resources: 12
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 0 of device 0000:00:00.0
>agpgart: Detected AGP bridge 0
>agpgart: Setting up Nforce3 AGP.
>agpgart: AGP aperture is 256M @ 0xc0000000
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>system 00:00: ioport range 0x4000-0x407f has been reserved
>system 00:00: ioport range 0x4080-0x40ff has been reserved
>system 00:00: ioport range 0x4400-0x447f has been reserved
>system 00:00: ioport range 0x4480-0x44ff has been reserved
>system 00:00: ioport range 0x4800-0x487f has been reserved
>system 00:00: ioport range 0x4880-0x48ff has been reserved
>system 00:01: iomem range 0xd1800-0xd3fff has been reserved
>system 00:01: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:01: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:01: iomem range 0xfc000-0xfffff could not be reserved
>system 00:01: iomem range 0x7fff0000-0x7fffffff could not be reserved
>system 00:01: iomem range 0xffff0000-0xffffffff has been reserved
>system 00:01: iomem range 0x0-0x9ffff could not be reserved
>system 00:01: iomem range 0x100000-0x7ffeffff could not be reserved
>system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:01: iomem range 0xfefff000-0xfeffffff has been reserved
>system 00:01: iomem range 0xfff80000-0xfff80fff has been reserved
>system 00:03: ioport range 0x4d0-0x4d1 has been reserved
>system 00:03: ioport range 0x294-0x297 has been reserved
>system 00:03: ioport range 0x4e0-0x4e7 has been reserved
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: 0xe0000000-0xe2ffffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: disabled.
>  MEM window: 0xe3000000-0xe3ffffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>type=2000 audit(1207414029.512:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>NET: Registered protocol family 1
>registered taskstats version 1
>Freeing unused kernel memory: 404k freed
>Write protecting the kernel read-only data: 1684k
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (34 C)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>sata_nv 0000:00:0a.0: version 3.5
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 23 (level, high) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc000 irq 23
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc008 irq 23
>Switched to high resolution mode on CPU 0
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: HDT722520DLA380, V44OA96A, max UDMA/133
>ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
>ata2: SATA link down (SStatus 0 SControl 300)
>isa bounce pool size: 16 pages
>scsi 0:0:0:0: Direct-Access     ATA      HDT722520DLA380  V44O PQ: 0 ANSI: 5
>pata_amd 0000:00:08.0: version 0.3.10
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>scsi2 : pata_amd
>scsi3 : pata_amd
>ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata3: port disabled. ignoring.
>ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
>ata4.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
>ata4: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
>ata4: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
>ata4.00: configured for UDMA/33
>ata4.01: configured for UDMA/33
>scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
>scsi 3:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
>ACPI: PNP0C0B:00 is registered as cooling_device1
>ACPI: Fan [FAN] (on)
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 22, io mem 0xe4003000
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6<6>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
> sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-rc5-git3-6-default ohci_hcd
>usb usb1: SerialNumber: 0000:00:02.0
>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.1: irq 21, io mem 0xe4004000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-rc5-git3-6-default ohci_hcd
>usb usb2: SerialNumber: 0000:00:02.1
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:02.2 to 64
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:02.2: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.2
>ehci_hcd 0000:00:02.2: irq 20, io mem 0xe4005000
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: EHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-rc5-git3-6-default ehci_hcd
>usb usb3: SerialNumber: 0000:00:02.2
>PM: Starting manual resume from disk
>usb 3-3: new high speed USB device using ehci_hcd and address 2
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 3-3: configuration #1 chosen from 1 choice
>hub 3-3:1.0: USB hub found
>hub 3-3:1.0: 4 ports detected
>usb 3-3: New USB device found, idVendor=04b4, idProduct=6560
>usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 3-3.1: new high speed USB device using ehci_hcd and address 3
>usb 3-3.1: configuration #1 chosen from 1 choice
>usb 3-3.1: New USB device found, idVendor=090c, idProduct=6000
>usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-3.1: Product: USB2.0 Card Reader  
>usb 3-3.1: Manufacturer: Generic       ,   . 
>usb 3-3.1: SerialNumber: 12345678901234567890
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>scsi 3:0:1:0: Attached scsi generic sg2 type 5
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>input: Power Button (FF) as /devices/virtual/input/input3
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input4
>ACPI: Power Button (CM) [PWRB]
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 23 (level, high) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 3:0:1:0: Attached scsi CD-ROM sr1
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>parport0: Printer, Samsung ML-1710
>forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:04:61:b7:bb:e7
>forcedeth 0000:00:05.0: csum timirq lnktim desc-v2
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>Linux video capture interface: v2.00
>saa7130/34: v4l2 driver version 0.2.14 loaded
>scsi 4:0:0:0: Direct-Access     Generic                   6000 PQ: 0 ANSI: 0 CCS
>sd 4:0:0:0: [sdb] 3932160 512-byte hardware sectors (2013 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 4b 00 00 08
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
>sd 4:0:0:0: [sdb] 3932160 512-byte hardware sectors (2013 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 4b 00 00 08
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 4:0:0:0: [sdb] Attached SCSI removable disk
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>intel8x0_measure_ac97_clock: measured 54686 usecs
>intel8x0: clocking to 46874
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
>saa7133[0]: found at 0000:02:09.0, rev: 208, irq: 17, latency: 32, mmio: 0xe3000000
>saa7133[0]: subsystem: 5168:0319, board: LifeView FlyDVB Trio [card=84,autodetected]
>saa7133[0]: board init: gpio is 211400
>saa7133[0]: i2c eeprom 00: 68 51 19 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
>saa7133[0]: i2c eeprom 10: 00 00 60 0a ff 20 ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 f9 ff ff ff ff
>saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 40: ff 00 10 c0 ff 12 08 01 c2 96 c6 1c 16 3a 15 ff
>saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom f0: 00 0c 45 00 54 db ff ff ff ff ff ff ff ff ff ff
>tuner' 2-004b: chip found @ 0x96 (saa7133[0])
>tda8290 2-004b: setting tuner address to 61
>tda8290 2-004b: type set to tda8290+75a
>saa7133[0]: registered device video0 [v4l2]
>saa7133[0]: registered device vbi0
>saa7133[0]: registered device radio0
>DVB: registering new adapter (saa7133[0])
>DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
>tda1004x: setting up plls for 48MHz sampling clock
>tda1004x: found firmware revision 29 -- ok
>Adding 2104472k swap on /dev/sda5.  Priority:-1 extents:1 across:2104472k
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x6
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x8
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>Marking TSC unstable due to cpufreq changes
>Time: acpi_pm clocksource has been installed.
>Clocksource tsc unstable (delta = -94640916 ns)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>warning: `ntpd' uses 32-bit capabilities (legacy support in use)
>eth0: no IPv6 routers present
>usb 3-3.4: new high speed USB device using ehci_hcd and address 4
>usb 3-3.4: configuration #1 chosen from 1 choice
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb 3-3.4: New USB device found, idVendor=10d6, idProduct=1101
>usb 3-3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
>usb 3-3.4: Product: USB MASS STORAGE CLASS 
>usb 3-3.4: SerialNumber: A00000600001
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>scsi scan: INQUIRY result too short (5), using 36
>scsi 5:0:0:0: Direct-Access     GENERIC  USB DISK DEVICE  1.00 PQ: 0 ANSI: 0 CCS
>sd 5:0:0:0: [sdc] 1971121 512-byte hardware sectors (1009 MB)
>sd 5:0:0:0: [sdc] Write Protect is off
>sd 5:0:0:0: [sdc] Mode Sense: 00 c0 00 00
>sd 5:0:0:0: [sdc] Assuming drive cache: write through
>sd 5:0:0:0: [sdc] 1971121 512-byte hardware sectors (1009 MB)
>sd 5:0:0:0: [sdc] Write Protect is off
>sd 5:0:0:0: [sdc] Mode Sense: 00 c0 00 00
>sd 5:0:0:0: [sdc] Assuming drive cache: write through
> sdc:
>sd 5:0:0:0: [sdc] Attached SCSI removable disk
>sd 5:0:0:0: Attached scsi generic sg4 type 0
>scsi scan: INQUIRY result too short (5), using 36
>scsi 5:0:0:1: Direct-Access     GENERIC  USB DISK DEVICE  1.00 PQ: 0 ANSI: 0 CCS
>sd 5:0:0:1: [sdd] 4022257 512-byte hardware sectors (2059 MB)
>sd 5:0:0:1: [sdd] Write Protect is off
>sd 5:0:0:1: [sdd] Mode Sense: 00 c0 00 00
>sd 5:0:0:1: [sdd] Assuming drive cache: write through
>sd 5:0:0:1: [sdd] 4022257 512-byte hardware sectors (2059 MB)
>sd 5:0:0:1: [sdd] Write Protect is off
>sd 5:0:0:1: [sdd] Mode Sense: 00 c0 00 00
>sd 5:0:0:1: [sdd] Assuming drive cache: write through
> sdd: sdd1
> sdd: p1 exceeds device capacity
>sd 5:0:0:1: [sdd] Attached SCSI removable disk
>sd 5:0:0:1: Attached scsi generic sg5 type 0
>usb-storage: device scan complete
>attempt to access beyond end of device
>sdd: rw=0, want=4022258, limit=4022257
>Buffer I/O error on device sdd1, logical block 4022014
>attempt to access beyond end of device
>sdd: rw=0, want=4022259, limit=4022257
>Buffer I/O error on device sdd1, logical block 4022015
>attempt to access beyond end of device
>sdd: rw=0, want=4022258, limit=4022257
>Buffer I/O error on device sdd1, logical block 4022014
>attempt to access beyond end of device
>sdd: rw=0, want=4022259, limit=4022257
>Buffer I/O error on device sdd1, logical block 4022015
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>Buffer I/O error on device sdd1, logical block 4022024
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>Buffer I/O error on device sdd1, logical block 4022025
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>Buffer I/O error on device sdd1, logical block 4022026
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>Buffer I/O error on device sdd1, logical block 4022027
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>Buffer I/O error on device sdd1, logical block 4022028
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>Buffer I/O error on device sdd1, logical block 4022024
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022258, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022259, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022260, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022261, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022262, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022263, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022264, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022265, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022266, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022267, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022258, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022259, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022258, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022259, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022258, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022259, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022260, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022261, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022262, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022263, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022264, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022265, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022266, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022267, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022268, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022269, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022270, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022271, limit=4022257
>attempt to access beyond end of device
>sdd: rw=0, want=4022272, limit=4022257

Actions: View

Attachments on bug 373128: 203488 | 206385 | 206386 | 206387