Attachment 209469 Details for Bug 382167

/var/log/boot.msg

boot.msg (text/plain), 48.10 KB, created by Jörg Hermsdorf on 2008-04-22 00:35:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jörg Hermsdorf

Created: 2008-04-22 00:35:10 UTC

Size: 48.10 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.25-rc9-17-default
>Loaded 28922 symbols from /boot/System.map-2.6.25-rc9-17-default.
>Symbols match kernel version 2.6.25.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.25-rc9-17-default (geeko@buildhost) (gcc version 4.3.1 20080409 (prerelease) [gcc-4_3-branch revision 134138] (SUSE Linux) ) #1 SMP 2008-04-15 22:54:53 +0200
><6>Command line: root=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 vga=0x345 resume=/dev/sda5 splash=silent
><6>BIOS-provided physical RAM map:
><6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
><6> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
><6> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
><6> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
><6> BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
><6> BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI data)
><6> BIOS-e820: 000000007fedf000 - 000000007ff00000 (ACPI NVS)
><6> BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
><6> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
><6> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
><6> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
><6> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
><6> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
><6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
><6> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 523984) 1 entries of 3200 used
><6>end_pfn_map = 1048576
><6>DMI present.
><4>ACPI: RSDP 000F67E0, 0024 (r2 LENOVO)
><4>ACPI: XSDT 7FED162E, 0084 (r1 LENOVO TP-7I        1130  LTP        0)
><4>ACPI: FACP 7FED1700, 00F4 (r3 LENOVO TP-7I        1130 LNVO        1)
><4>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
><4>ACPI: DSDT 7FED1A5E, D2D9 (r1 LENOVO TP-7I        1130 MSFT  100000E)
><4>ACPI: FACS 7FEF4000, 0040
><4>ACPI: SSDT 7FED18B4, 01AA (r1 LENOVO TP-7I        1130 MSFT  100000E)
><4>ACPI: ECDT 7FEDED37, 0052 (r1 LENOVO TP-7I        1130 LNVO        1)
><4>ACPI: TCPA 7FEDED89, 0032 (r2 LENOVO TP-7I        1130 LNVO        1)
><4>ACPI: APIC 7FEDEDBB, 0068 (r1 LENOVO TP-7I        1130 LNVO        1)
><4>ACPI: MCFG 7FEDEE23, 003C (r1 LENOVO TP-7I        1130 LNVO        1)
><4>ACPI: HPET 7FEDEE5F, 0038 (r1 LENOVO TP-7I        1130 LNVO        1)
><4>ACPI: BOOT 7FEDEFD8, 0028 (r1 LENOVO TP-7I        1130  LTP        1)
><4>ACPI: SSDT 7FEF26D9, 025F (r1 LENOVO TP-7I        1130 INTL 20050513)
><4>ACPI: SSDT 7FEF2938, 00A6 (r1 LENOVO TP-7I        1130 INTL 20050513)
><4>ACPI: SSDT 7FEF29DE, 04F7 (r1 LENOVO TP-7I        1130 INTL 20050513)
><4>ACPI: SSDT 7FEF2ED5, 01D8 (r1 LENOVO TP-7I        1130 INTL 20050513)
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-000000007fed0000
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 523984) 1 entries of 3200 used
><6>Bootmem setup node 0 0000000000000000-000000007fed0000
><6>  NODE_DATA [000000000000c000 - 0000000000013fff]
><6>  bootmap [0000000000014000 -  0000000000023fdf] pages 10
><6>early res: 0 [0-fff] BIOS data page
><6>early res: 1 [6000-7fff] SMP_TRAMPOLINE
><6>early res: 2 [200000-8b6bc7] TEXT DATA BSS
><6>early res: 3 [37b58000-37fef737] RAMDISK
><6>early res: 4 [9f000-9ffff] EBDA
><6>early res: 5 [8000-bfff] PGTABLE
><7> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
><7> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
><7> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
><7> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
><7> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
><7> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
><7> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
><7> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
><7> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
><7> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
><7> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
><7> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
><7> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
><7> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  DMA32        4096 ->  1048576
><4>  Normal    1048576 ->  1048576
><4>Movable zone start PFN for each node
><4>early_node_map[2] active PFN ranges
><4>    0:        0 ->      159
><4>    0:      256 ->   523984
><7>On node 0 totalpages: 523887
><7>  DMA zone: 56 pages used for memmap
><7>  DMA zone: 1728 pages reserved
><7>  DMA zone: 2215 pages, LIFO batch:0
><7>  DMA32 zone: 7107 pages used for memmap
><7>  DMA32 zone: 512781 pages, LIFO batch:31
><7>  Normal zone: 0 pages used for memmap
><7>  Movable zone: 0 pages used for memmap
><6>ACPI: PM-Timer IO Port: 0x1008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><6>Processor #0 (Bootup-CPU)
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
><6>Processor #1
><6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><6>Setting APIC routing to flat
><6>ACPI: HPET id: 0x8086a201 base: 0xfed00000
><6>Using ACPI (MADT) for SMP configuration information
><6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
><6>PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
><6>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
><6>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
><6>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
><6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
><6>PERCPU: Allocating 50608 bytes of per cpu data
><4>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 514996
><4>Policy zone: DMA32
><5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 vga=0x345 resume=/dev/sda5 splash=silent
><6>bootsplash: silent mode.
><4>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>Extended CMOS year: 2000
><6>TSC calibrated against PM_TIMER
><6>time.c: Detected 2327.498 MHz processor.
><4>Console: colour dummy device 80x25
><6>console [tty0] enabled
><6>Checking aperture...
><7>Calgary: detecting Calgary via BIOS EBDA area
><7>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
><6>Memory: 2054956k/2095936k available (2362k kernel code, 40592k reserved, 1924k data, 404k init)
><7>CPA: page pool initialized 1 of 1 pages preallocated
><7>hpet clockevent registered
><4>Calibrating delay using timer specific routine.. 4660.19 BogoMIPS (lpj=9320385)
><6>Security Framework initialized
><6>AppArmor: AppArmor initialized
><3>AppArmor: Unable to log event (1505) to audit subsys
><6>AppArmor: Registered secondary security module name="capability"
><3>AppArmor: Unable to log event (1505) to audit subsys
><6>Capability LSM initialized as secondary
><6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><6>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Mount-cache hash table entries: 256
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 0/0 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>CPU0: Thermal monitoring enabled (TM2)
><6>using mwait in idle threads.
><6>ACPI: Core revision 20070126
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 1630 Objects with 76 Devices 440 Methods 27 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0002) - 11 Objects with 0 Devices 7 Methods 0 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0005) - 14 Objects with 0 Devices 5 Methods 0 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0006) - 14 Objects with 1 Devices 2 Methods 0 Regions
><4> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><6>Using local APIC timer interrupts.
><7>APIC timer calibration result 10390624
><6>Detected 10.390 MHz APIC timer.
><6>Booting processor 1/2 APIC 0x1
><4>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 4655.04 BogoMIPS (lpj=9310096)
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 1/1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><6>CPU1: Thermal monitoring enabled (TM2)
><4>Intel(R) Core(TM)2 CPU         T7600  @ 2.33GHz stepping 06
><6>checking TSC synchronization [CPU#0 -> CPU#1]:
><4>Measured 720538 cycles TSC warp between CPUs, turning off TSC clock.
><4>Marking TSC unstable due to check_tsc_sync_source failed
><6>Brought up 2 CPUs
><7>CPU0 attaching sched-domain:
><7> domain 0: span 00000000,00000000,00000000,00000003
><7>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
><7>  domain 1: span 00000000,00000000,00000000,00000003
><7>   groups: 00000000,00000000,00000000,00000003
><7>CPU1 attaching sched-domain:
><7> domain 0: span 00000000,00000000,00000000,00000003
><7>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
><7>  domain 1: span 00000000,00000000,00000000,00000003
><7>   groups: 00000000,00000000,00000000,00000003
><6>net_namespace: 1016 bytes
><6>Booting paravirtualized kernel on bare hardware
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: Using MMCONFIG at f0000000 - f3ffffff
><6>PCI: Using configuration type 1
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 2 Runtime GPEs in this block
><6>ACPI: EC: EC description table is found, configuring boot EC
><4>Completing Region/Field/Buffer/Package initialization:..................................................................................................................................................................................................................................................................................
><4>Initialized 25/27 Regions 142/142 Fields 64/64 Buffers 43/55 Packages (1689 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:...<6>ACPI: EC: non-query interrupt received, switching to interrupt mode
><4>....
><4>Executed 7 _INI methods requiring 2 _STA executions (examined 83 objects)
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
><6>ACPI: EC: driver started in poll mode
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><6>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
><6>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
><6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
><6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
><6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
><6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
><6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
><6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
><6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
><6>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
><6>ACPI: EC: non-query interrupt received, switching to interrupt mode
><6>ACPI: Power Resource [PUBS] (on)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 12 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>PCI-GART: No AMD northbridge found.
><6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
><6>hpet0: 3 64-bit timers, 14318180 Hz
><4>ACPI: RTC can wake from S4
><7>Switched to high resolution mode on CPU 0
><7>Switched to high resolution mode on CPU 1
><6>system 00:00: iomem range 0x0-0x9ffff could not be reserved
><6>system 00:00: iomem range 0xc0000-0xc3fff has been reserved
><6>system 00:00: iomem range 0xc4000-0xc7fff has been reserved
><6>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
><6>system 00:00: iomem range 0xcc000-0xcffff has been reserved
><6>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
><6>system 00:00: iomem range 0x0-0x0 could not be reserved
><6>system 00:00: iomem range 0x0-0x0 could not be reserved
><6>system 00:00: iomem range 0xdc000-0xdffff could not be reserved
><6>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
><6>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
><6>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
><6>system 00:00: iomem range 0xec000-0xeffff could not be reserved
><6>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
><6>system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
><6>system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
><6>system 00:00: iomem range 0xfed41000-0xffffffff could not be reserved
><6>system 00:02: ioport range 0x164e-0x164f has been reserved
><6>system 00:02: ioport range 0x1000-0x107f has been reserved
><6>system 00:02: ioport range 0x1180-0x11bf has been reserved
><6>system 00:02: ioport range 0x800-0x80f has been reserved
><6>system 00:02: ioport range 0x15e0-0x15ef has been reserved
><6>system 00:02: ioport range 0x1600-0x165f could not be reserved
><6>system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
><6>system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
><6>system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
><6>system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
><6>system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: 2000-2fff
><6>  MEM window: 0xee100000-0xee1fffff
><6>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: 3000-3fff
><6>  MEM window: 0xee000000-0xee0fffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.1
><6>  IO window: 4000-5fff
><6>  MEM window: 0xec000000-0xedffffff
><6>  PREFETCH window: 0x00000000e4000000-0x00000000e40fffff
><6>PCI: Bridge: 0000:00:1c.2
><6>  IO window: 6000-7fff
><6>  MEM window: 0xe8000000-0xe9ffffff
><6>  PREFETCH window: 0x00000000e4100000-0x00000000e41fffff
><6>PCI: Bridge: 0000:00:1c.3
><6>  IO window: 8000-9fff
><6>  MEM window: 0xea000000-0xebffffff
><6>  PREFETCH window: 0x00000000e4200000-0x00000000e42fffff
><4>PCI: Bus 22, cardbus bridge: 0000:15:00.0
><6>  IO window: 0x0000a000-0x0000a0ff
><6>  IO window: 0x0000a400-0x0000a4ff
><6>  PREFETCH window: 0xe0000000-0xe3ffffff
><6>  MEM window: 0x88000000-0x8bffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: a000-dfff
><6>  MEM window: 0xe4300000-0xe7ffffff
><6>  PREFETCH window: 0x00000000e0000000-0x00000000e3ffffff
><6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22
><7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
><4>PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
><6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 262144 bind 65536)
><6>TCP reno registered
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 4701k freed
><6>Simple Boot Flag at 0x35 set to 0x1
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1208829990.509:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>pci 0000:01:00.0: Boot video device
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:01.0:pcie00]
><7>Allocate Port Service[0000:00:01.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><7>Allocate Port Service[0000:00:1c.0:pcie02]
><7>Allocate Port Service[0000:00:1c.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.1:pcie00]
><7>Allocate Port Service[0000:00:1c.1:pcie02]
><7>Allocate Port Service[0000:00:1c.1:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.2:pcie00]
><7>Allocate Port Service[0000:00:1c.2:pcie02]
><7>Allocate Port Service[0000:00:1c.2:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.3:pcie00]
><7>Allocate Port Service[0000:00:1c.3:pcie02]
><7>Allocate Port Service[0000:00:1c.3:pcie03]
><6>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20004980000, using 11550k, total 16384k
><6>vesafb: mode is 1400x1050x16, linelength=2816, pages=4
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...
><6>bootsplash: silentjpeg size 100197 bytes
><6>bootsplash: ...found (1400x1050, 36741 bytes, v3).
><4>Console: switching to colour frame buffer device 171x61
><6>fb0: VESA VGA frame buffer device
><7>hpet_resources: 0xfed00000 is busy
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.103
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
><6>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: PC Speaker as /devices/platform/pcspkr/input/input0
><6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>NET: Registered protocol family 1
><4>registered taskstats version 1
><6>Freeing unused kernel memory: 404k freed
><6>Write protecting the kernel read-only data: 1684k
><4>ACPI: SSDT 7FEF1D36, 02C4 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 00DA) - 6 Objects with 0 Devices 4 Methods 0 Regions
><4>ACPI: SSDT 7FEF207F, 065A (r1  PmRef  Cpu0Cst      100 INTL 20050513)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 00DB) - 13 Objects with 0 Devices 1 Methods 0 Regions
><7>Monitor-Mwait will be used to enter C-1 state
><7>Monitor-Mwait will be used to enter C-2 state
><7>Monitor-Mwait will be used to enter C-3 state
><6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
><6>ACPI: ACPI0007:00 is registered as cooling_device0
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><4>ACPI: SSDT 7FEF1C6E, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 00E5) - 4 Objects with 0 Devices 4 Methods 0 Regions
><4>ACPI: SSDT 7FEF1FFA, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 00E6) - 1 Objects with 0 Devices 1 Methods 0 Regions
><6>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
><6>ACPI: ACPI0007:01 is registered as cooling_device1
><6>ACPI: Processor [CPU1] (supports 8 throttling states)
><6>ACPI: LNXTHERM:01 is registered as thermal_zone0
><6>ACPI: Thermal Zone [THM0] (67 C)
><6>ACPI: LNXTHERM:02 is registered as thermal_zone1
><6>ACPI: Thermal Zone [THM1] (68 C)
><6>ACPI: ACPI Dock Station Driver 
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><7>ahci 0000:00:1f.2: version 3.0
><6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16
><4>Clocksource tsc unstable (delta = -71521366 ns)
><6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
><6>serio: Synaptics pass-through port at isa0060/serio1/input0
><6>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
><4>psmouse.c: Failed to reset mouse on synaptics-pt/serio0
><6>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
><6>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>scsi0 : ahci
><6>scsi1 : ahci
><6>scsi2 : ahci
><6>scsi3 : ahci
><6>ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 4346
><6>ata2: DUMMY
><6>ata3: DUMMY
><6>ata4: DUMMY
><6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata1.00: ATA-7: HTS721010G9SA00, MCZIC10V, max UDMA/100
><6>ata1.00: 195371568 sectors, multi 16: LBA48 
><6>ata1.00: configured for UDMA/100
><5>scsi 0:0:0:0: Direct-Access     ATA      HTS721010G9SA00  MCZI PQ: 0 ANSI: 5
><7>ata_piix 0000:00:1f.1: version 2.12
><6>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
><6>scsi4 : ata_piix
><6>scsi5 : ata_piix
><6>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
><6>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
><6>ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4083N, 1.08, max UDMA/33
><6>ata5.00: configured for UDMA/33
><7>ata6: port disabled. ignoring.
><5>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4083N 1.08 PQ: 0 ANSI: 5
><6>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>USB Universal Host Controller Interface driver v3.0
><4>Driver 'sd' needs updating - please use bus_type methods
><5>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda:<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.25-rc9-17-default uhci_hcd
><4> sda1 sda2 sda3 <<6>usb usb1: SerialNumber: 0000:00:1d.0
><4> sda5<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
><4> sda6<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><4> sda7<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
><4> sda8 >
><6>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
><5>sd 0:0:0:0: [sda] Attached SCSI disk
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: UHCI Host Controller
><6>usb 1-1: new low speed USB device using uhci_hcd and address 2
><6>usb usb2: Manufacturer: Linux 2.6.25-rc9-17-default uhci_hcd
><6>usb usb2: SerialNumber: 0000:00:1d.1
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>usb 1-1: configuration #1 chosen from 1 choice
><6>usb 1-1: New USB device found, idVendor=046d, idProduct=c521
><6>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: UHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.25-rc9-17-default uhci_hcd
><6>usb usb3: SerialNumber: 0000:00:1d.2
><6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
><6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>usb 1-1: Product: USB Receiver
><6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: UHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.25-rc9-17-default uhci_hcd
><6>usb usb4: SerialNumber: 0000:00:1d.3
><6>usb 1-1: Manufacturer: Logitech
><6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 8 ports detected
><6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb5: Product: EHCI Host Controller
><6>usb usb5: Manufacturer: Linux 2.6.25-rc9-17-default ehci_hcd
><6>usb usb5: SerialNumber: 0000:00:1d.7
><6>usb 1-1: USB disconnect, address 2
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><6>PM: Starting manual resume from disk
><6>usb 1-1: new low speed USB device using uhci_hcd and address 3
><6>usb 1-1: configuration #1 chosen from 1 choice
><6>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input3
><6>input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1
><6>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/input/input4
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda8, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1
><6>usb 1-1: New USB device found, idVendor=046d, idProduct=c521
><6>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 1-1: Product: USB Receiver
><6>usb 1-1: Manufacturer: Logitech
><6>usb 4-1: new full speed USB device using uhci_hcd and address 2
><6>usb 4-1: configuration #1 chosen from 1 choice
><6>usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
><6>usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 4-1: Product: BCM2045B
><6>usb 4-1: Manufacturer: Broadcom Corp
><6>usb 4-2: new full speed USB device using uhci_hcd and address 3
><6>usb 4-2: configuration #1 chosen from 1 choice
><6>usb 4-2: New USB device found, idVendor=0483, idProduct=2016
><6>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 4-2: Product: Biometric Coprocessor
><6>usb 4-2: Manufacturer: STMicroelectronics
><6>IBM TrackPoint firmware: 0x0e, buttons: 3/3
><6>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input5
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>scsi 4:0:0:0: Attached scsi generic sg1 type 5
><6>e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
><6>e1000e: Copyright (c) 1999-2007 Intel Corporation.
><4>e1000e 0000:02:00.0: Disabling L1 ASPM
><6>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:02:00.0 to 64
><6>eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:e0:fe:92
><6>eth0: Intel(R) PRO/1000 Network Connection
><6>eth0: MAC: 2, PHY: 2, PBA No: 005301-003
><6>thinkpad_acpi: ThinkPad ACPI Extras v0.19
><6>thinkpad_acpi: http://ibm-acpi.sf.net/
><6>thinkpad_acpi: ThinkPad BIOS 7IET32WW (1.13 ), EC 79HT50WW-1.07
><6>thinkpad_acpi: Lenovo ThinkPad T60p
><6>Bluetooth: Core ver 2.11
><6>NET: Registered protocol family 31
><6>Bluetooth: HCI device and connection manager initialized
><6>thinkpad_acpi: radio switch found; radios are enabled
><6>Bluetooth: HCI socket layer initialized
><6>ACPI: AC Adapter [AC] (on-line)
><5>thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
><6>input: ThinkPad Extra Buttons as /devices/virtual/input/input6
><6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
><6>ACPI: Battery Slot [BAT0] (battery present)
><3>intel_rng: FWH not detected
><6>ACPI: Power Button (FF) [PWRF]
><6>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input8
><6>ACPI: Lid Switch [LID]
><6>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9
><6>ACPI: Sleep Button (CM) [SLPB]
><7>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
><7>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
><3>ACPI: Error installing bay notify handler
><6>ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
><4>Driver 'sr' needs updating - please use bus_type methods
><4>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 4:0:0:0: Attached scsi CD-ROM sr0
><6>ACPI: device:03 is registered as cooling_device2
><6>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input10
><6>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
><6>ACPI: device:08 is registered as cooling_device3
><6>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/device:07/input/input11
><6>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
><6>NET: Registered protocol family 23
><6>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
><6>rtc0: alarms up to one month, y3k
><6>iTCO_vendor_support: vendor-support=0
><6>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]
><6>Yenta: Using INTVAL to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64
><6>Bluetooth: HCI USB driver ver 2.9
><6>usbcore: registered new interface driver hci_usb
><6>nsc-ircc 00:0a: activated
><6>nsc-ircc, chip->init
><6>nsc-ircc, Found chip at base=0x164e
><6>nsc-ircc, driver loaded (Dag Brattli)
><6>IrDA: Registered device irda0
><6>nsc-ircc, Found dongle: No dongle connected
><6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
><6>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
><6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
><6>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
><6>iwl3945: Copyright(c) 2003-2007 Intel Corporation
><6>Yenta: ISA IRQ mask 0x0cf0, PCI irq 16
><6>Socket status: 30000007
><6>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff
><6>pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
><6>pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
><6>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
><6>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:03:00.0 to 64
><6>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
><6>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
><6>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
><6>hda_intel: probe_mask set to 0x1 for device 17aa:2010
><7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
><7>phy0: Selected rate control algorithm 'iwl-3945-rs'
><6>ACPI: PCI interrupt for device 0000:03:00.0 disabled
><6>wmaster0 renamed to wmaster0_rename
><6>Adding 1542168k swap on /dev/sda5.  Priority:-1 extents:1 across:1542168k
><6>device-mapper: uevent: version 1.0.3
><6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
><6>loop: module loaded
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda6, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda7, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><4>fuse init (API version 7.9)
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Tue Apr 22 02:06:30 2008
>
>Creating device nodes with udev
>Trying manual resume from /dev/sda5
>Invoking userspace resume from /dev/sda5
>resume: libgcrypt version: 1.4.0
>Trying manual resume from /dev/sda5
>Invoking in-kernel resume from /dev/sda5
>Waiting for device /dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 to appear:  ok
>fsck 1.40.8 (13-Mar-2008)
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 
>openSUSE_11.0: clean, 95494/460560 files, 640639/1839426 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Tue Apr 22 04:06:39 2008
>
>done
>Starting udevd: done
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>donemount: according to mtab, /dev/sda8 is already mounted on /
>
>Setting up the hardware clockdone
>Activating device mapper...
>done
>/usr/bin/tac
>Checking file systems...
>fsck 1.40.8 (13-Mar-2008)
>/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part6: clean, 207490/1573728 files, 1553562/3146724 blocks
>Home: clean, 124065/4316928 files, 7095139/8650752 blocks
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda6 on /mnt/sda6 type ext3 (rw)
>/dev/sda7 on /mnt/sda7 type ext3 (rw)
>doneLoading fuse module done
>Mounting fuse control filesystemdone
>Retry device configuration: done
>Configuring serial ports...
>Configured serial ports
>doneActivating remaining swap-devices in /etc/fstab...
>done<notice>killproc: kill(703,29)
>Creating /var/log/boot.msg
>doneSetting up hostname 'spacebook'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>done
>Setting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>net.ipv4.conf.default.promote_secondaries = 1
>net.ipv4.conf.all.promote_secondaries = 1
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>System Boot Control: The system has been set up
>Skipped features: boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(703,3)
>
>INIT: Entering runlevel: 5
>
>
>
>Boot logging started on /dev/tty1(/dev/console) at Tue Apr 22 02:07:16 2008
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>Starting java.binfmt_misc done
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/sbin/acpid ]
>Starting resource managerdone
>Starting D-Bus daemonUnknown username "polkituser" in message bus configuration file
>Starting acpid done
><notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PWD=/ PREVLEVEL=N LINES=61 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
>Starting irqbalance done
>acpid: starting up
>
>
>acpid: 0 rules loaded
>
>
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PWD=/ PREVLEVEL=N LINES=61 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>done
>Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
>done
>Loading CPUFreq modulesdone
>Starting HAL daemonLoading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
>doneLoading compose table latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>doneStarting Firewall Initialization (phase 1 of 2) done
>Initializing random number generatordone
>Checking/updating CPU microcode done
>done
><notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=61 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER= SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/usr/bin/kdm ]
>Setting up network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>done    eth0      device: Intel Corporation 82573L Gigabit Ethernet Controller
>              No configuration found for eth0
>unused    irda0     
>              No configuration found for irda0
>unused    wlan0     device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
>    wlan0     warning: WPA configured but may be unsupported
>    wlan0     warning: by this device
>    wlan0     starting wpa_supplicant
>ioctl[SIOCSIWAUTH]: Operation not supported
>WEXT auth param 4 value 0x0 -     wlan0     (DHCP) . . . . . no IP address yet... backgrounding. 
>waiting
>Waiting for mandatory devices:  wlan0 __NSC__
>12 11 <notice>checkproc: /usr/bin/kdm 3021
>10 9 8 6 5 4 <notice>pidofproc: dhcpcd 2975
><notice>killproc: kill(2047,20)
><notice>killproc: kill(2051,1)
><notice>killproc: kill(2047,18)
><notice>killproc: kill(2047,12)
>
>    wlan0     device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
>    wlan0     DHCP client (dhcpcd) is running
>    wlan0     IP address: 192.168.55.200/24
>doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
>Starting service kdmdone
><notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/sbin/auditd ]
><notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
><notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/sbin/portmap ]
>Starting RPC portmap daemondone
>Starting SSH daemondone
>Starting auditd done
>Starting service kdmdone
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
>Starting cupsddone
><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>Starting Name Service Cache Daemondone
>Starting Avahi daemon.done
>Starting mail service (Postfix)<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
>Starting Avahi DNS Configuration daemondone
><notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
>Starting powersaved: done
>failed
><notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
><notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x345 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_HTS721010G9SA00_MPCZN7Y0H9TN3L-part8 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
>Starting CRON daemondone
>Starting smartd done
>Starting Firewall Initialization (phase 2 of 2) done
>done
>Master Resource Control: runlevel 5 has been reached
>Failed services in runlevel 5: postfix
><notice>killproc: kill(1949,3)

Actions: View

Attachments on bug 382167: 209469 | 212415 | 212418 | 213455