Attachment 212418 Details for Bug 382167

/var/log/boot.msg with bluetooth on

boot.msg (text/plain), 44.55 KB, created by Jan Matejek on 2008-05-05 17:30:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jan Matejek

Created: 2008-05-05 17:30:41 UTC

Size: 44.55 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.25-26-default
>Loaded 28948 symbols from /boot/System.map-2.6.25-26-default.
>Symbols match kernel version 2.6.25.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.25-26-default (geeko@buildhost) (gcc version 4.3.1 20080425 (prerelease) [gcc-4_3-branch revision 134659] (SUSE Linux) ) #1 SMP 2008-04-30 07:56:05 +0200
><6>Command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 resume=/dev/sda5 splash=silent vga=normal
><6>BIOS-provided physical RAM map:
><6> BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
><6> BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
><6> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><6> BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
><6> BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
><6> BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
><6> BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved)
><6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
><7>Entering add_active_range(0, 0, 154) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 522144) 1 entries of 3200 used
><6>end_pfn_map = 1043969
><6>DMI present.
><4>ACPI: RSDP 000F8750, 0014 (r0 ACPIAM)
><4>ACPI: RSDT 7F7A0000, 0044 (r1 MSI_NB MEGABOOK 20070528 MSFT       97)
><4>ACPI: FACP 7F7A0200, 0084 (r2 052807 FACP1327 20070528 MSFT       97)
><4>ACPI: DSDT 7F7A05B0, 5B1B (r1  A1221 A1221000        0 INTL 20051117)
><4>ACPI: FACS 7F7AE000, 0040
><4>ACPI: APIC 7F7A0390, 005C (r1 052807 APIC1327 20070528 MSFT       97)
><4>ACPI: MCFG 7F7A03F0, 003C (r1 052807 OEMMCFG  20070528 MSFT       97)
><4>ACPI: SLIC 7F7A0430, 0176 (r1 MSI_NB MEGABOOK 20070528 MSFT       97)
><4>ACPI: OEMB 7F7AE040, 0071 (r1 052807 OEMB1327 20070528 MSFT       97)
><4>ACPI: HPET 7F7A60D0, 0038 (r1 052807 OEMHPET  20070528 MSFT       97)
><4>ACPI: GSCI 7F7AE0C0, 2024 (r1 052807 GMCHSCI  20070528 MSFT       97)
><4>ACPI: SSDT 7F7B08F0, 04E6 (r1  PmRef    CpuPm     3000 INTL 20051117)
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-000000007f7a0000
><7>Entering add_active_range(0, 0, 154) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 522144) 1 entries of 3200 used
><6>Bootmem setup node 0 0000000000000000-000000007f7a0000
><6>  NODE_DATA [000000000000c000 - 0000000000013fff]
><6>  bootmap [0000000000014000 -  0000000000023ef7] pages 10
><6>early res: 0 [0-fff] BIOS data page
><6>early res: 1 [6000-7fff] SMP_TRAMPOLINE
><6>early res: 2 [200000-8b6bd7] TEXT DATA BSS
><6>early res: 3 [37b6f000-37fef1c6] RAMDISK
><6>early res: 4 [9ac00-9bbff] EBDA
><6>early res: 5 [8000-bfff] PGTABLE
><7> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
><7> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
><7> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
><7> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
><7> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
><7> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
><7> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
><7> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
><7> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
><7> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
><7> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
><7> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
><7> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
><7> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  DMA32        4096 ->  1048576
><4>  Normal    1048576 ->  1048576
><4>Movable zone start PFN for each node
><4>early_node_map[2] active PFN ranges
><4>    0:        0 ->      154
><4>    0:      256 ->   522144
><7>On node 0 totalpages: 522042
><7>  DMA zone: 56 pages used for memmap
><7>  DMA zone: 1728 pages reserved
><7>  DMA zone: 2210 pages, LIFO batch:0
><7>  DMA32 zone: 7082 pages used for memmap
><7>  DMA32 zone: 510966 pages, LIFO batch:31
><7>  Normal zone: 0 pages used for memmap
><7>  Movable zone: 0 pages used for memmap
><6>ACPI: PM-Timer IO Port: 0x808
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><6>Processor #0 (Bootup-CPU)
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
><6>Processor #1
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><6>Setting APIC routing to flat
><6>ACPI: HPET id: 0xffffffff base: 0xfed00000
><6>Using ACPI (MADT) for SMP configuration information
><6>PM: Registered nosave memory: 000000000009a000 - 000000000009b000
><6>PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
><6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
><6>Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)
><6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
><6>PERCPU: Allocating 50608 bytes of per cpu data
><4>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513176
><4>Policy zone: DMA32
><5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 resume=/dev/sda5 splash=silent vga=normal
><6>bootsplash: silent mode.
><4>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>TSC calibrated against PM_TIMER
><6>time.c: Detected 1496.249 MHz processor.
><4>Console: colour VGA+ 80x25
><6>console [tty0] enabled
><6>Checking aperture...
><7>Calgary: detecting Calgary via BIOS EBDA area
><7>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
><6>Memory: 2047600k/2088576k available (2368k kernel code, 40568k reserved, 1918k data, 404k init)
><7>CPA: page pool initialized 1 of 1 pages preallocated
><7>hpet clockevent registered
><4>Calibrating delay using timer specific routine.. 3041.72 BogoMIPS (lpj=6083444)
><6>Security Framework initialized
><6>AppArmor: AppArmor initialized <NULL>
><6>AppArmor: Registered secondary security module capability
><6>Capability LSM initialized as secondary
><6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><6>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Mount-cache hash table entries: 256
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 2048K
><6>CPU 0/0 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>CPU0: Thermal monitoring enabled (TM2)
><6>using mwait in idle threads.
><6>ACPI: Core revision 20070126
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 898 Objects with 70 Devices 211 Methods 32 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0002) - 14 Objects with 0 Devices 4 Methods 0 Regions
><4> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><6>Using local APIC timer interrupts.
><7>APIC timer calibration result 10390617
><6>Detected 10.390 MHz APIC timer.
><6>Booting processor 1/2 APIC 0x1
><4>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 2992.53 BogoMIPS (lpj=5985066)
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 2048K
><6>CPU 1/1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><6>CPU1: Thermal monitoring enabled (TM2)
><4>Intel(R) Core(TM)2 Duo CPU     T5250  @ 1.50GHz stepping 0d
><6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
><6>Brought up 2 CPUs
><7>CPU0 attaching sched-domain:
><7> domain 0: span 00000000,00000000,00000000,00000003
><7>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
><7>  domain 1: span 00000000,00000000,00000000,00000003
><7>   groups: 00000000,00000000,00000000,00000003
><7>CPU1 attaching sched-domain:
><7> domain 0: span 00000000,00000000,00000000,00000003
><7>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
><7>  domain 1: span 00000000,00000000,00000000,00000003
><7>   groups: 00000000,00000000,00000000,00000003
><6>net_namespace: 1016 bytes
><6>Booting paravirtualized kernel on bare hardware
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><3>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
><3>PCI: Not using MMCONFIG.
><6>PCI: Using configuration type 1
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 3 Runtime GPEs in this block
><7>ACPI: EC: Look up EC in DSDT
><4>Completing Region/Field/Buffer/Package initialization:.................................................................................................................................
><4>Initialized 28/32 Regions 26/26 Fields 40/41 Buffers 35/36 Packages (921 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:.
><4>Executed 1 _INI methods requiring 0 _STA executions (examined 77 objects)
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><3>ACPI: Error attaching device data
><3>ACPI: Error attaching device data
><6>ACPI: EC: non-query interrupt received, switching to interrupt mode
><6>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
><6>ACPI: EC: driver started in interrupt mode
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><6>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
><6>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
><6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
><6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
><6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
><6>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
><6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
><6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
><6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 14 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>PCI-GART: No AMD northbridge found.
><6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
><6>hpet0: 3 64-bit timers, 14318180 Hz
><6>AppArmor: AppArmor Filesystem Enabled 
><4>ACPI: RTC can wake from S4
><6>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
><6>system 00:08: ioport range 0x400-0x41f has been reserved
><6>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
><6>system 00:08: ioport range 0x800-0x87f has been reserved
><6>system 00:08: ioport range 0x500-0x53f has been reserved
><6>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
><6>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
><6>system 00:08: iomem range 0xfed45000-0xfed8ffff has been reserved
><6>system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
><6>system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
><6>system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
><6>system 00:0d: iomem range 0x0-0x9ffff could not be reserved
><6>system 00:0d: iomem range 0xc0000-0xcffff has been reserved
><6>system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
><6>system 00:0d: iomem range 0x100000-0x7f7fffff could not be reserved
><6>system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: e000-efff
><6>  MEM window: 0xfe000000-0xfebfffff
><6>  PREFETCH window: 0x00000000fa000000-0x00000000fcffffff
><6>PCI: Bridge: 0000:00:1c.1
><6>  IO window: d000-dfff
><6>  MEM window: 0xfdf00000-0xfdffffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.2
><6>  IO window: disabled.
><6>  MEM window: 0xfde00000-0xfdefffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: disabled.
><6>  MEM window: 0xfdd00000-0xfddfffff
><6>  PREFETCH window: disabled.
><6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
><6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 262144 bind 65536)
><6>TCP reno registered
><7>Switched to high resolution mode on CPU 1
><7>Switched to high resolution mode on CPU 0
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 4608k freed
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1210015616.276:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>pci 0000:00:02.0: Boot video device
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><7>Allocate Port Service[0000:00:1c.0:pcie02]
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.1:pcie00]
><7>Allocate Port Service[0000:00:1c.1:pcie02]
><7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.2:pcie00]
><7>Allocate Port Service[0000:00:1c.2:pcie02]
><7>hpet_resources: 0xfed00000 is busy
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.103
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
><6>i8042.c: Detected active multiplexing controller, rev 1.1.
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
><4>atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
><4>atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
><4>atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
><4>atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known.
><6>input: PC Speaker as /devices/platform/pcspkr/input/input1
><6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
><6>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>NET: Registered protocol family 1
><4>registered taskstats version 1
><6>Freeing unused kernel memory: 404k freed
><6>Write protecting the kernel read-only data: 1680k
><4>ACPI: SSDT 7F7B01C0, 01D1 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 00E6) - 6 Objects with 0 Devices 4 Methods 0 Regions
><4>ACPI: SSDT 7F7B0430, 04B6 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 00E7) - 1 Objects with 0 Devices 1 Methods 0 Regions
><7>Monitor-Mwait will be used to enter C-1 state
><7>Monitor-Mwait will be used to enter C-2 state
><7>Monitor-Mwait will be used to enter C-3 state
><6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
><6>ACPI: ACPI0007:00 is registered as cooling_device0
><4>ACPI: SSDT 7F7B00F0, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 00EC) - 4 Objects with 0 Devices 4 Methods 0 Regions
><4>ACPI: SSDT 7F7B03A0, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
><4>Parsing all Control Methods:
><4>Table [SSDT](id 00ED) - 1 Objects with 0 Devices 1 Methods 0 Regions
><6>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
><6>ACPI: ACPI0007:01 is registered as cooling_device1
><4>Marking TSC unstable due to TSC halts in idle
><6>ACPI: LNXTHERM:01 is registered as thermal_zone0
><6>ACPI: Thermal Zone [THRM] (60 C)
><6>No dock devices found.
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><7>ahci 0000:00:1f.2: version 3.0
><6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
><4>Clocksource tsc unstable (delta = -479985106 ns)
><6>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
><6>ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part 
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>scsi0 : ahci
><6>scsi1 : ahci
><6>scsi2 : ahci
><6>ata1: SATA max UDMA/133 abar m2048@0xfdcff800 port 0xfdcff900 irq 4348
><6>ata2: SATA max UDMA/133 abar m2048@0xfdcff800 port 0xfdcff980 irq 4348
><6>ata3: SATA max UDMA/133 abar m2048@0xfdcff800 port 0xfdcffa00 irq 4348
><6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata1.00: ATA-7: WDC WD1600BEVS-00RST0, 04.01G04, max UDMA/133
><6>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
><6>ata1.00: configured for UDMA/133
><6>ata2: SATA link down (SStatus 0 SControl 300)
><6>ata3: SATA link down (SStatus 0 SControl 300)
><5>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEVS-0 04.0 PQ: 0 ANSI: 5
><7>ata_piix 0000:00:1f.1: version 2.12
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
><6>scsi3 : ata_piix
><6>scsi4 : ata_piix
><6>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
><6>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
><6>ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WA03, max UDMA/33
><6>ata4.00: configured for UDMA/33
><7>ata5: port disabled. ignoring.
><5>scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WA03 PQ: 0 ANSI: 5
><6>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>USB Universal Host Controller Interface driver v3.0
><6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
><6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><4>Driver 'sd' needs updating - please use bus_type methods
><5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda2 sda3 sda4 <<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.25-26-default uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:1a.0
><6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
><6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
><4> sda5<6>ehci_hcd 0000:00:1a.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
><6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdcff000
><4> sda6<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 4 ports detected
><4> sda7 >
><5>sd 0:0:0:0: [sda] Attached SCSI disk
><6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: EHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.25-26-default ehci_hcd
><6>usb usb2: SerialNumber: 0000:00:1a.7
><6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdcff400
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 6 ports detected
><6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: EHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.25-26-default ehci_hcd
><6>usb usb3: SerialNumber: 0000:00:1d.7
><6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
><6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: UHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.25-26-default uhci_hcd
><6>usb usb4: SerialNumber: 0000:00:1a.1
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
><6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb5: Product: UHCI Host Controller
><6>usb usb5: Manufacturer: Linux 2.6.25-26-default uhci_hcd
><6>usb usb5: SerialNumber: 0000:00:1d.0
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
><6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000
><6>usb usb6: configuration #1 chosen from 1 choice
><6>hub 6-0:1.0: USB hub found
><6>hub 6-0:1.0: 2 ports detected
><6>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb6: Product: UHCI Host Controller
><6>usb usb6: Manufacturer: Linux 2.6.25-26-default uhci_hcd
><6>usb usb6: SerialNumber: 0000:00:1d.1
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
><6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080
><6>usb usb7: configuration #1 chosen from 1 choice
><6>hub 7-0:1.0: USB hub found
><6>hub 7-0:1.0: 2 ports detected
><6>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb7: Product: UHCI Host Controller
><6>usb usb7: Manufacturer: Linux 2.6.25-26-default uhci_hcd
><6>usb usb7: SerialNumber: 0000:00:1d.2
><6>PM: Starting manual resume from disk
><6>usb 1-2: new full speed USB device using uhci_hcd and address 2
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda6, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>usb 1-2: configuration #1 chosen from 1 choice
><6>usb 1-2: New USB device found, idVendor=0db0, idProduct=a97a
><6>usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
><6>usb 7-1: new full speed USB device using uhci_hcd and address 2
><6>usb 7-1: configuration #1 chosen from 1 choice
><6>usb 7-1: New USB device found, idVendor=147e, idProduct=2016
><6>usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 7-1: Product: Fingerprint Sensor   
><6>usb 7-1: Manufacturer: TouchStrip        
><6>usb 7-2: new low speed USB device using uhci_hcd and address 3
><6>usb 7-2: configuration #1 chosen from 1 choice
><6>usb 7-2: New USB device found, idVendor=046d, idProduct=c03e
><6>usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 7-2: Product: USB-PS/2 Optical Mouse
><6>usb 7-2: Manufacturer: Logitech
><6>agpgart: Detected an Intel 965GM Chipset.
><6>agpgart: Detected 7676K stolen memory.
><6>agpgart: AGP aperture is 256M @ 0xd0000000
><6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
><6>ACPI: Power Button (FF) [PWRF]
><6>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C09:00/PNP0C0D:00/input/input4
><6>Bluetooth: Core ver 2.11
><6>ACPI: Lid Switch [LID0]
><6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
><6>NET: Registered protocol family 31
><6>Bluetooth: HCI device and connection manager initialized
><6>Bluetooth: HCI socket layer initialized
><6>ACPI: Power Button (CM) [PWRB]
><6>ACPI: AC Adapter [ADP1] (on-line)
><6>Bluetooth: HCI USB driver ver 2.9
><6>usbcore: registered new interface driver hci_usb
><6>r8169 Gigabit Ethernet driver 2.2LK loaded
><6>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:03:00.0 to 64
><6>eth0: RTL8168b/8111b at 0xffffc200008cc000, 00:19:db:ed:64:3c, XID 38000000 IRQ 4347
><6>ACPI: Battery Slot [BAT1] (battery present)
><6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
><6>ACPI: device:27 is registered as cooling_device2
><6>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/input/input6
><6>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
><7>ALSA sound/pci/hda/hda_codec.c:2860: autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2864:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2868:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2869:    mono: mono_out=0x0
><7>ALSA sound/pci/hda/hda_codec.c:2877:    inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0
><7>ALSA sound/pci/hda/hda_generic.c:678: hda_generic: no proper input path found
><7>ALSA sound/pci/hda/hda_generic.c:426: hda_generic: no proper output path found
><7>ALSA sound/pci/hda/hda_generic.c:1021: hda_generic: no PCM found
><6>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
><6>usbcore: registered new interface driver hiddev
><6>iTCO_vendor_support: vendor-support=0
><6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
><6>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
><6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
><6>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input7
><6>input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>scsi 3:0:0:0: Attached scsi generic sg1 type 5
><4>Driver 'sr' needs updating - please use bus_type methods
><4>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 3:0:0:0: Attached scsi CD-ROM sr0
><6>sdhci: Secure Digital Host Controller Interface driver
><6>sdhci: Copyright(c) Pierre Ossman
><6>sdhci: SDHCI controller found at 0000:01:04.1 [1524:0750] (rev 0)
><6>ACPI: PCI Interrupt 0000:01:04.1[A] -> GSI 16 (level, low) -> IRQ 16
><6>mmc0: SDHCI at 0xfddff400 irq 16 DMA
><6>sdhci: SDHCI controller found at 0000:01:04.3 [1524:0751] (rev 0)
><6>ACPI: PCI Interrupt 0000:01:04.3[A] -> GSI 16 (level, low) -> IRQ 16
><4>sdhc1:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
><6>mmc1: SDHCI at 0xfddffc00 irq 16 DMA
><6>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23ks
><6>iwl4965: Copyright(c) 2003-2007 Intel Corporation
><6>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:02:00.0 to 64
><6>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
><6>iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
><7>phy0: Selected rate control algorithm 'iwl-4965-rs'
><6>ACPI: PCI interrupt for device 0000:02:00.0 disabled
><6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
><6>rtc0: alarms up to one month, y3k
><6>wmaster0 renamed to wmaster0_rename
><6>Bluetooth: L2CAP ver 2.9
><6>Bluetooth: L2CAP socket layer initialized
><6>Bluetooth: RFCOMM socket layer initialized
><6>Bluetooth: RFCOMM TTY layer initialized
><6>Bluetooth: RFCOMM ver 1.8
><6>Adding 1020088k swap on /dev/sda5.  Priority:-1 extents:1 across:1020088k
><6>device-mapper: uevent: version 1.0.3
><6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
><6>loop: module loaded
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda3, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda2, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><6>kjournald starting.  Commit interval 5 seconds
><4>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
><6>EXT3 FS on dm-0, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Mon May  5 19:26:56 2008
>
>Creating device nodes with udev
>Trying manual resume from /dev/sda5
>Invoking userspace resume from /dev/sda5
>boot/82-resume.userspace.sh: line 48: /proc/splash: No such file or directory
>resume: libgcrypt version: 1.4.0
>Trying manual resume from /dev/sda5
>Invoking in-kernel resume from /dev/sda5
>Waiting for device /dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 to appear:  ok
>fsck 1.40.8 (13-Mar-2008)
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 
>/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6: clean, 120543/1281120 files, 885620/5120710 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Mon May  5 21:27:02 2008
>
>done
>Starting udevd: done
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>donemount: according to mtab, /dev/sda6 is already mounted on /
>
>Setting up the hardware clockdone
>Activating device mapper...
>done
>Checking file systems...
>fsck 1.40.8 (13-Mar-2008)
>/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part3: clean, 195086/2562240 files, 2862467/5120718 blocks
>/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part2: clean, 238035/2562240 files, 1870855/5120718 blocks
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda1 on /mnt/fat type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
>/dev/sda3 on /mnt/oldubuntu type ext3 (rw)
>/dev/sda2 on /mnt/ubuntu type ext3 (rw)
>doneActivating crypto devices using /etc/crypttab ... 
>ehci-hcd ohci-hcd uhci-hcd usb-ohci usb-uhci Loading keymap i386/qwertz/cz-us-qwertz.map.gz
>doneStart Unicode mode
>doneLoading console font lat2-16.psfu  -m trivial G0:loadable
>donePlease enter passphrase for /dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part7 (cr_sda7): /dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part7...done
>Loading fuse module done
>Mounting fuse control filesystemdone
>Retry device configuration: done
>Configuring serial ports...
>Configured serial ports
>doneMounting securityfs on /sys/kernel/security done
>Loading AppArmor profiles Activating remaining swap-devices in /etc/fstab...
>done<notice>killproc: kill(637,29)
>Creating /var/log/boot.msg
>donedone
>Setting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>net.ipv4.conf.default.promote_secondaries = 1
>net.ipv4.conf.all.promote_secondaries = 1
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>Setting up hostname 'linux'done
>Setting up NIS domainname 'suse.cz'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>              IP address: 127.0.0.2/8   
>done
>System Boot Control: The system has been set up
>Skipped features: boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(637,3)
>
>Boot logging started on /dev/tty1(/dev/console) at Mon May  5 19:27:45 2008
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>
>INIT: Entering runlevel: 5
>
>
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>Starting resource managerdone
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/sbin/acpid ]
>acpid: starting up
>
>
>Starting D-Bus daemonInitializing random number generatordone
>Starting acpid done
>acpid: 0 rules loaded
>
>
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>Checking/updating CPU microcode done
>done
><notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
>Starting ConsoleKitdone
>Starting Firewall Initialization (phase 1 of 2) done
>Loading CPUFreq modulesdone
>Starting HAL daemondone
><notice>startproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ]
><notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ]
>Starting the NetworkManagerDispatcherdone
>Starting the NetworkManagerdone
><notice>checkproc: /usr/sbin/NetworkManager 2412
>Starting service gdm<notice>startproc: execve (/usr/sbin/gdm) [ /usr/sbin/gdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 SPLASHCFG= PWD=/ LANG=cs_CZ.UTF-8 PREVLEVEL=N LINES=25 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/gnome SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/usr/sbin/gdm ]
>done
><notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/sbin/portmap ]
>Starting RPC portmap daemondone
>Mount CIFS File Systems unused
>Loading keymap i386/qwertz/cz-us-qwertz.map.gz
>doneLoading compose table latin2done
>Start Unicode mode
>doneLoading console font lat2-16.psfu  -m trivial G0:loadable
>doneStarting service gdmdone
><notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/sbin/auditd ]
>Starting auditd done
>Starting Avahi daemon<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
>.<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>Starting Name Service Cache Daemondone
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
><notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
>Starting irqbalance done
>Starting cupsddone
><notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
>Starting powersaved: done
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Starting java.binfmt_misc done
>Starting SSH daemondone
>done
><notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
>Starting Avahi DNS Configuration daemondone
>Starting mail service (Postfix)done
><notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
><notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600BEVS-_WD-WXC907339049-part6 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
>Starting smartd done
>Starting CRON daemondone
>Starting Firewall Initialization (phase 2 of 2) done
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: smbfs splash
><notice>killproc: kill(2054,3)

Actions: View

Attachments on bug 382167: 209469 | 212415 | 212418 | 213455