Attachment 213684 Details for Bug 387104

dmesg output from kernel - opensuse 1st start

dmesg.txt (text/plain), 36.18 KB, created by Gilles Sabourin on 2008-05-08 18:43:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gilles Sabourin

Created: 2008-05-08 18:43:37 UTC

Size: 36.18 KB

patch

obsolete

>Linux version 2.6.25-26-default (geeko@buildhost) (gcc version 4.3.1 20080425 (prerelease) [gcc-4_3-branch revision 134659] (SUSE Linux) ) #1 SMP 2008-04-30 07:56:05 +0200
>Command line: root=/dev/sdb5 resume=/dev/sdb7 splash=silent showopts vga=0x31a
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000100 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
> BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
> BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 1, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524160) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000FBB80, 0014 (r0 ACPIAM)
>ACPI: RSDT 7FF80000, 003C (r1 A_M_I_ OEMRSDT   3000812 MSFT       97)
>ACPI: FACP 7FF80200, 0084 (r2 A_M_I_ OEMFACP   3000812 MSFT       97)
>ACPI: DSDT 7FF805C0, 90CD (r1  A0812 A0812001        1 INTL 20060113)
>ACPI: FACS 7FF8E000, 0040
>ACPI: APIC 7FF80390, 006C (r1 A_M_I_ OEMAPIC   3000812 MSFT       97)
>ACPI: MCFG 7FF80400, 003C (r1 A_M_I_ OEMMCFG   3000812 MSFT       97)
>ACPI: OEMB 7FF8E040, 0081 (r1 A_M_I_ AMI_OEM   3000812 MSFT       97)
>ACPI: HPET 7FF89690, 0038 (r1 A_M_I_ OEMHPET   3000812 MSFT       97)
>ACPI: OSFR 7FF896D0, 00B0 (r1 A_M_I_ OEMOSFR   3000812 MSFT       97)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007ff80000
>Entering add_active_range(0, 1, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524160) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007ff80000
>  NODE_DATA [000000000000c000 - 0000000000013fff]
>  bootmap [0000000000014000 -  0000000000023fef] pages 10
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-8b6bd7] TEXT DATA BSS
>early res: 3 [7fac4000-7ff74910] RAMDISK
>early res: 4 [9fc00-a0bff] EBDA
>early res: 5 [8000-bfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
>Zone PFN ranges:
>  DMA             1 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        1 ->      159
>    0:      256 ->   524160
>On node 0 totalpages: 524062
>  DMA zone: 55 pages used for memmap
>  DMA zone: 1728 pages reserved
>  DMA zone: 2215 pages, LIFO batch:0
>  DMA32 zone: 7110 pages used for memmap
>  DMA32 zone: 512954 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7fe00000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 50608 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515169
>Policy zone: DMA32
>Kernel command line: root=/dev/sdb5 resume=/dev/sdb7 splash=silent showopts vga=0x31a
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 3005.552 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2055452k/2096640k available (2368k kernel code, 40796k reserved, 1918k data, 404k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 6015.15 BogoMIPS (lpj=12030317)
>Security Framework initialized
>AppArmor: AppArmor initialized <NULL>
>AppArmor: Registered secondary security module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal LVT vector (0xfa) already installed
>using mwait in idle threads.
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 999 Objects with 76 Devices 285 Methods 35 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0079 [00] enable                : System is already in ACPI mode
>Using local APIC timer interrupts.
>APIC timer calibration result 20871917
>Detected 20.871 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6011.13 BogoMIPS (lpj=12022265)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     E6850  @ 3.00GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>net_namespace: 1016 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 3F [_GPE] 8 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 12 Wake, Enabled 2 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:...............................................................................................................................................................................................................
>Initialized 27/35 Regions 44/44 Fields 48/48 Buffers 88/91 Packages (1008 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:.
>Executed 1 _INI methods requiring 1 _STA executions (examined 82 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15), disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15), disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15), disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15), disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled.
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  E1, should be D8 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>AppArmor: AppArmor Filesystem Enabled 
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:07: ioport range 0x290-0x297 has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x480-0x4bf has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
>system 00:08: iomem range 0xffa00000-0xffafffff has been reserved
>system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
>system 00:08: iomem range 0xffe00000-0xffefffff could not be reserved
>system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved
>system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0xc0000-0xcffff has been reserved
>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
>system 00:0e: iomem range 0x0-0x0 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: b000-bfff
>  MEM window: 0xfa000000-0xfe8fffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: 0x00000000f8f00000-0x00000000f8ffffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: d000-dfff
>  MEM window: 0xfea00000-0xfeafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: c000-cfff
>  MEM window: 0xfe900000-0xfe9fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-efff
>  MEM window: 0xfeb00000-0xfebfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>Unpacking initramfs... done
>Freeing initrd memory: 4802k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1210277835.460:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>vesafb: framebuffer at 0xfb000000, mapped to 0xffffc20000900000, using 10240k, total 10240k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=2560
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 98233 bytes
>bootsplash: ...found (1280x1024, 35219 bytes, v3).
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input0
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>NET: Registered protocol family 1
>registered taskstats version 1
>Freeing unused kernel memory: 404k freed
>Write protecting the kernel read-only data: 1680k
>ACPI: SSDT 7FF8E0D0, 01D2 (r1    AMI   CPU1PM        1 INTL 20060113)
>Parsing all Control Methods:
>Table [SSDT](id 00CB) - 9 Objects with 0 Devices 3 Methods 0 Regions
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: SSDT 7FF8E2B0, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
>Parsing all Control Methods:
>Table [SSDT](id 00CE) - 7 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: ACPI0007:01 is registered as cooling_device1
>SCSI subsystem initialized
>PCI: Enabling device 0000:05:01.0 (0016 -> 0017)
>ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 17 (level, low) -> IRQ 17
>ahc_pci:5:1:0: Using left over BIOS settings
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 2902/04/10/15/20C/30C SCSI adapter>
>        aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
>
>No dock devices found.
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.1 to 64
>scsi1 : pata_jmicron
>scsi2 : pata_jmicron
>ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
>ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
>ata1.00: ATA-6: WDC WD1200JB-00DUA3, 75.13B75, max UDMA/100
>ata1.00: 234441648 sectors, multi 0: LBA48 
>ata1.01: ATA-6: WDC WD1600JB-00GVA0, 08.02D08, max UDMA/100
>ata1.01: 312581808 sectors, multi 0: LBA48 
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD1200JB-00D 75.1 PQ: 0 ANSI: 5
>scsi 1:0:1:0: Direct-Access     ATA      WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5
>ahci 0000:03:00.0: version 3.0
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>scsi3 : ahci
>scsi4 : ahci
>ata3: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
>ata4: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata_piix 0000:00:1f.2: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi5 : ata_piix
>scsi6 : ata_piix
>ata5: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
>ata6: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.01: NODEV after polling detection
>ata5.00: ATAPI: Optiarc DVD RW AD-7170S, 1.02, max UDMA/66
>ata5.00: configured for UDMA/66
>ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
>ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata6.00: configured for UDMA/133
>scsi 5:0:0:0: CD-ROM            Optiarc  DVD RW AD-7170S  1.02 PQ: 0 ANSI: 5
>scsi 6:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 22
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>scsi7 : ata_piix
>scsi8 : ata_piix
>ata7: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
>ata8: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
>ata7: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>EDD information not available.
>sys_init_module: 'edd'->init suspiciously returned 1, it should follow 0/-E convention
>sys_init_module: loading module anyway...
>Pid: 120, comm: modprobe Tainted: G        N 2.6.25-26-default #1
>
>Call Trace:
> [<ffffffff8020d686>] dump_trace+0xc4/0x576
> [<ffffffff8020db78>] show_trace+0x40/0x57
> [<ffffffff804502d5>] _etext+0x72/0x7b
> [<ffffffff8025b862>] sys_init_module+0x1b80/0x1c48
> [<ffffffff8020bfea>] system_call_after_swapgs+0x8a/0x8f
>DWARF2 unwinder stuck at system_call_after_swapgs+0x8a/0x8f
>
>Leftover inexact backtrace:
>
>
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Driver 'sd' needs updating - please use bus_type methods
>sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1
>sd 1:0:0:0: [sda] Attached SCSI disk
>sd 1:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 < sdb5<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-26-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
> sdb6<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
> sdb7 >
>sd 1:0:1:0: [sdb] Attached SCSI disk
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>sd 6:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 6:0:0:0: [sdc] Write Protect is off
>sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 6:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 6:0:0:0: [sdc] Write Protect is off
>sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 < sdc5 sdc6<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
> sdc7 >
>usb usb2: Manufacturer: Linux 2.6.25-26-default uhci_hcd
>sd 6:0:0:0: [sdc] Attached SCSI disk
>usb usb2: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.2 to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-26-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-26-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: New USB device found, idVendor=0bda, idProduct=8187
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-1: Product: RTL8187_Wireless
>usb 2-1: Manufacturer: Manufacturer_Realtek_RTL8187_
>usb 2-1: SerialNumber: 0015AF2258BF
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-26-default uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-26-default uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-26-default ehci_hcd
>usb usb7: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
>ehci_hcd 0000:00:1d.7: debug port 1
>usb 4-2: not running at top speed; connect to a high speed hub
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb8: configuration #1 chosen from 1 choice
>usb 4-2: unable to read config index 0 descriptor/start: -71
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 6 ports detected
>usb 4-2: chopping to 0 config(s)
>usb 4-2: string descriptor 0 read error: -71
>usb 4-2: string descriptor 0 read error: -71
>usb 4-2: no configuration chosen from 0 choices
>usb 4-2: New USB device found, idVendor=04a9, idProduct=2225
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: EHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.25-26-default ehci_hcd
>usb usb8: SerialNumber: 0000:00:1d.7
>PM: Starting manual resume from disk
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 7-3: new high speed USB device using ehci_hcd and address 2
>usb 7-3: configuration #1 chosen from 1 choice
>usb 7-3: New USB device found, idVendor=0bda, idProduct=8187
>usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 7-3: Product: RTL8187_Wireless
>usb 7-3: Manufacturer: Manufacturer_Realtek_RTL8187_
>usb 7-3: SerialNumber: 0015AF2258BF
>usb 2-1: USB disconnect, address 2
>usb 4-2: USB disconnect, address 2
>usb 8-2: new high speed USB device using ehci_hcd and address 2
>usb 8-2: configuration #1 chosen from 1 choice
>usb 8-2: New USB device found, idVendor=04a9, idProduct=2225
>usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 8-2: Product: CanoScan
>usb 8-2: Manufacturer: Canon
>usb 6-1: new full speed USB device using uhci_hcd and address 2
>usb 6-1: configuration #1 chosen from 1 choice
>usb 6-1: New USB device found, idVendor=046d, idProduct=08b2
>usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 6-2: new low speed USB device using uhci_hcd and address 3
>usb 6-2: configuration #1 chosen from 1 choice
>usb 6-2: New USB device found, idVendor=046d, idProduct=c50e
>usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 6-2: Product: USB RECEIVER
>usb 6-2: Manufacturer: Logitech
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:1:0: Attached scsi generic sg1 type 0
>scsi 5:0:0:0: Attached scsi generic sg2 type 5
>sd 6:0:0:0: Attached scsi generic sg3 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[febfe000-febfe7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
>PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>sky2 0000:02:00.0: v1.21 addr 0xfe9fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2
>sky2 eth0: addr 00:1b:fc:8b:fc:33
>iTCO_vendor_support: vendor-support=0
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
>ACPI: Power Button (CM) [PWRB]
>Linux video capture interface: v2.00
>gameport: EMU10K1 is pci0000:05:02.1/gameport0, io 0xec00, speed 1049kHz
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 5:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
>ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
>ACPI: Device needs an ACPI driver
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>usbcore: registered new interface driver hiddev
>input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.2/usb6/6-2/6-2:1.0/input/input4
>input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-2
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>pwc: Philips webcam module version 10.0.13 loaded.
>pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
>pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
>pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2860: autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0)
>ALSA sound/pci/hda/hda_codec.c:2864:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2868:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2869:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2877:    inputs: mic=0x17, fmic=0x14, line=0x15, fline=0x0, cd=0x18, aux=0x0
>phy0: Selected rate control algorithm 'pid'
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d800015f130d]
>phy0: hwaddr 00:15:af:22:58:bf, rtl8187 V1 + rtl8225z2
>pwc: Logitech QuickCam 4000 Pro USB webcam detected.
>pwc: Registered as /dev/video0.
>usbcore: registered new interface driver rtl8187
>usbcore: registered new interface driver Philips webcam
>ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
>usbcore: registered new interface driver snd-usb-audio
>Adding 2104472k swap on /dev/sdb7.  Priority:-1 extents:1 across:2104472k
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>type=1505 audit(1210277855.351:2): operation="profile_load" name="/bin/ping" name2="default" pid=1775
>type=1505 audit(1210277855.431:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1776
>type=1505 audit(1210277855.535:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1779
>type=1505 audit(1210277855.619:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1783
>type=1505 audit(1210277855.703:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1787
>type=1505 audit(1210277855.823:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1792
>type=1505 audit(1210277855.867:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1793
>type=1505 audit(1210277855.943:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1805
>type=1505 audit(1210277856.007:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1813
>type=1505 audit(1210277856.063:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1821
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Uniform Multi-Platform E-IDE driver
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>st: Version 20080221, fixed bufsize 32768, s/g segs 256
>Driver 'st' needs updating - please use bus_type methods
>NET: Registered protocol family 17
>eth0: no IPv6 routers present
>sky2 eth0: disabling interface
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:13:46:5c:23:1d
>wlan0: RX authentication from 00:13:46:5c:23:1d (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:13:46:5c:23:1d
>wlan0: RX AssocResp from 00:13:46:5c:23:1d (capab=0x421 status=0 aid=2)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:13:46:5c:23:1d)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>wlan0: no IPv6 routers present
>ppdev: user-space parallel port driver
>lp: driver loaded but no devices found
>lp: driver loaded but no devices found
>wlan0: No ProbeResp from current AP 00:13:46:5c:23:1d - assume out of range
>usbcore: deregistering interface driver snd-usb-audio
>ACPI: PCI interrupt for device 0000:05:02.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2860: autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0)
>ALSA sound/pci/hda/hda_codec.c:2864:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2868:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2869:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2877:    inputs: mic=0x17, fmic=0x14, line=0x15, fline=0x0, cd=0x18, aux=0x0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:13:46:5c:23:1d
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:13:46:5c:23:1d
>wlan0: authenticate with AP 00:13:46:5c:23:1d
>wlan0: authenticate with AP 00:13:46:5c:23:1d
>wlan0: authentication with AP 00:13:46:5c:23:1d timed out

Actions: View

Attachments on bug 387104: 213682 | 213683 | 213684 | 213685