Attachment 213890 Details for Bug 335486

boot.msg from system with ethernet driver in initrd

boot.msg (text/plain), 50.37 KB, created by Marius Tomaschewski on 2008-05-09 11:36:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Marius Tomaschewski

Created: 2008-05-09 11:36:41 UTC

Size: 50.37 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.22.17-0.1-default
>Loaded 26666 symbols from /boot/System.map-2.6.22.17-0.1-default.
>Symbols match kernel version 2.6.22.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC
><6>Command line: root=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 vga=normal noresume splash=silent showopts PROFILE=default 3
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
><4> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable)
><4> BIOS-e820: 00000000dfeb0000 - 00000000dfee3000 (ACPI NVS)
><4> BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
><4> BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
><4> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
><4> BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 917168) 1 entries of 3200 used
><7>Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
><4>end_pfn_map = 1179648
><6>DMI 2.3 present.
><4>ACPI: RSDP 000F7D60, 0024 (r2 Nvidia)
><4>ACPI: XSDT DFEE30C0, 004C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
><4>ACPI: FACP DFEEC600, 00F4 (r3 Nvidia AWRDACPI 42302E31 AWRD        0)
><4>ACPI: DSDT DFEE3240, 936B (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
><4>ACPI: FACS DFEB0000, 0040
><4>ACPI: TCPA DFEEC800, 0032 (r1 HTC    HTCACPI  42302E31 AWRD        0)
><4>ACPI: SSDT DFEEC880, 0248 (r1 PTLTD  POWERNOW        1  LTP        1)
><4>ACPI: MCFG DFEECB40, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
><4>ACPI: APIC DFEEC740, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
><6>Scanning NUMA topology in Northbridge 24
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-0000000120000000
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 917168) 1 entries of 3200 used
><7>Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
><6>Bootmem setup node 0 0000000000000000-0000000120000000
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  DMA32        4096 ->  1048576
><4>  Normal    1048576 ->  1179648
><4>early_node_map[3] active PFN ranges
><4>    0:        0 ->      159
><4>    0:      256 ->   917168
><4>    0:  1048576 ->  1179648
><7>On node 0 totalpages: 1048143
><7>  DMA zone: 56 pages used for memmap
><7>  DMA zone: 1273 pages reserved
><7>  DMA zone: 2670 pages, LIFO batch:0
><7>  DMA32 zone: 14280 pages used for memmap
><7>  DMA32 zone: 898792 pages, LIFO batch:31
><7>  Normal zone: 1792 pages used for memmap
><7>  Normal zone: 129280 pages, LIFO batch:31
><6>ACPI: PM-Timer IO Port: 0x1008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><6>Processor #0 (Bootup-CPU)
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
><6>Processor #1
><6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
><7>ACPI: IRQ9 used by override.
><7>ACPI: IRQ14 used by override.
><7>ACPI: IRQ15 used by override.
><6>Setting APIC routing to flat
><6>Using ACPI (MADT) for SMP configuration information
><4>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
><4>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
><4>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
><4>swsusp: Registered nosave memory region: 00000000dfeb0000 - 00000000dfee3000
><4>swsusp: Registered nosave memory region: 00000000dfee3000 - 00000000dfef0000
><4>swsusp: Registered nosave memory region: 00000000dfef0000 - 00000000dff00000
><4>swsusp: Registered nosave memory region: 00000000dff00000 - 00000000f0000000
><4>swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f4000000
><4>swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fec00000
><4>swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
><6>Allocating PCI resources starting at e0000000 (gap: dff00000:10100000)
><6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
><6>PERCPU: Allocating 50296 bytes of per cpu data
><4>Built 1 zonelists.  Total pages: 1030742
><5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 vga=normal noresume splash=silent showopts PROFILE=default 3
><6>bootsplash: silent mode.
><4>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>Extended CMOS year: 2000
><4>Marking TSC unstable due to TSCs unsynchronized
><6>time.c: Detected 2411.041 MHz processor.
><4>Console: colour VGA+ 80x25
><4>Checking aperture...
><4>CPU 0: aperture @ 4000000 size 32 MB
><4>Aperture too small (32 MB)
><4>No AGP bridge found
><4>Your BIOS doesn't leave a aperture memory hole
><4>Please enable the IOMMU option in the BIOS setup
><4>This costs you 64 MB of RAM
><4>Mapping aperture over 65536 KB of RAM @ 4000000
><4>Memory: 4052756k/4718592k available (2053k kernel code, 139816k reserved, 1017k data, 316k init)
><4>Calibrating delay using timer specific routine.. 4826.08 BogoMIPS (lpj=9652160)
><6>Security Framework v1.0.0 initialized
><4>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
><4>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
><4>Mount-cache hash table entries: 256
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 0/0 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>SMP alternatives: switching to UP code
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 4325k freed
><6>ACPI: Core revision 20070126
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 1470 Objects with 115 Devices 373 Methods 48 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
><4> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><6>Using local APIC timer interrupts.
><4>result 12557516
><6>Detected 12.557 MHz APIC timer.
><6>SMP alternatives: switching to SMP code
><6>Booting processor 1/2 APIC 0x1
><4>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 4822.27 BogoMIPS (lpj=9644553)
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 1/1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><4>AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
><6>Brought up 2 CPUs
><4>migration_cost=197
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: Using MMCONFIG at f0000000 - f3ffffff
><5>PCI: No mmconfig possible on device 00:18
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 20 to 5F [_GPE] 8 regs on int 0x9
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 0 Runtime GPEs in this block
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 1 Runtime GPEs in this block
><7>ACPI: EC: Look up EC in DSDT
><4>Completing Region/Field/Buffer/Package initialization:..........................................................................................................................................................................
><4>Initialized 43/48 Regions 11/11 Fields 36/36 Buffers 80/105 Packages (1487 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:...
><4>Executed 3 _INI methods requiring 1 _STA executions (examined 120 objects)
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><6>PCI: Transparent bridge - 0000:00:0e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
><4>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
><4>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
><4>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
><4>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
><4>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
><4>ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15)
><4>ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
><4>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
><4>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
><4>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
><4>ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
><4>ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
><4>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
><4>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
><4>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
><4>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
><4>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
><4>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
><4>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
><4>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
><4>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
><4>ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
><4>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
><4>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
><4>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
><4>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
><4>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
><4>ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 12 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>PCI-DMA: Disabling AGP.
><4>PCI-DMA: aperture base @ 4000000 size 65536 KB
><6>PCI-DMA: using GART IOMMU.
><6>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
><4>ACPI: RTC can wake from S4
><6>pnp: 00:01: ioport range 0x1000-0x107f has been reserved
><6>pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
><6>pnp: 00:01: ioport range 0x1400-0x147f has been reserved
><6>pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
><6>pnp: 00:01: ioport range 0x1800-0x187f has been reserved
><6>pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
><6>pnp: 00:0a: iomem range 0x0-0x0 could not be reserved
><6>pnp: 00:0b: iomem range 0xcee00-0xcffff has been reserved
><6>pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
><6>pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
><6>pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
><6>PCI: Bridge: 0000:00:04.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:0e.0
><6>  IO window: disabled.
><6>  MEM window: fdf00000-fdffffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:03:00.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:03:00.1
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:12.0
><6>  IO window: disabled.
><6>Time: acpi_pm clocksource has been installed.
><6>  MEM window: fde00000-fdefffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:14.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:15.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:16.0
><6>  IO window: 9000-9fff
><6>  MEM window: fdd00000-fddfffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:17.0
><6>  IO window: 8000-8fff
><6>  MEM window: fa000000-fcffffff
><6>  PREFETCH window: e0000000-efffffff
><7>PCI: Setting latency timer of device 0000:00:04.0 to 64
><7>PCI: Setting latency timer of device 0000:00:0e.0 to 64
><7>PCI: Setting latency timer of device 0000:00:12.0 to 64
><7>PCI: Setting latency timer of device 0000:03:00.0 to 64
><4>ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
><6>ACPI: PCI Interrupt 0000:03:00.1[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:03:00.1 to 64
><7>PCI: Setting latency timer of device 0000:00:14.0 to 64
><7>PCI: Setting latency timer of device 0000:00:15.0 to 64
><7>PCI: Setting latency timer of device 0000:00:16.0 to 64
><7>PCI: Setting latency timer of device 0000:00:17.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
><4>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 524288 bind 65536)
><6>TCP reno registered
><6>audit: initializing netlink socket (disabled)
><5>audit(1210339191.428:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>Boot video device is 0000:09:00.0
><7>PCI: Setting latency timer of device 0000:00:04.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:04.0:pcie00]
><7>Allocate Port Service[0000:00:04.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:12.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:12.0:pcie00]
><7>Allocate Port Service[0000:00:12.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:14.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:14.0:pcie00]
><7>Allocate Port Service[0000:00:14.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:15.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:15.0:pcie00]
><7>Allocate Port Service[0000:00:15.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:16.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:16.0:pcie00]
><7>Allocate Port Service[0000:00:16.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:17.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:17.0:pcie00]
><7>Allocate Port Service[0000:00:17.0:pcie03]
><6>Real Time Clock Driver v1.12ac
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>PNP: No PS/2 controller found. Probing ports directly.
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: PC Speaker as /class/input/input0
><6>NET: Registered protocol family 1
><6>Freeing unused kernel memory: 316k freed
><6>ACPI: Thermal Zone [THRM] (40 C)
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><7>pata_amd 0000:00:0c.0: version 0.3.8
><7>PCI: Setting latency timer of device 0000:00:0c.0 to 64
><6>scsi0 : pata_amd
><6>scsi1 : pata_amd
><6>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14
><6>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15
><6>ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
><6>ata1.01: ATAPI: LITE-ON LTR-48246S, SS0E, max UDMA/33
><6>ata1.00: configured for UDMA/33
><6>ata1.01: configured for UDMA/33
><7>ata2: port disabled. ignoring.
><5>scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 5
><5>scsi 0:0:1:0: CD-ROM            LITE-ON  LTR-48246S       SS0E PQ: 0 ANSI: 5
><7>sata_nv 0000:00:0d.0: version 3.4
><4>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
><6>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:0d.0 to 64
><6>scsi2 : sata_nv
><6>scsi3 : sata_nv
><6>ata3: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001dc00 irq 23
><6>ata4: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001dc08 irq 23
><6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata3.00: ATA-7: ST3250624AS, 3.AAH, max UDMA/133
><6>ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
><6>ata3.00: configured for UDMA/133
><6>ata4: SATA link down (SStatus 0 SControl 300)
><5>scsi 2:0:0:0: Direct-Access     ATA      ST3250624AS      3.AA PQ: 0 ANSI: 5
><4>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
><6>ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22
><7>PCI: Setting latency timer of device 0000:00:0d.1 to 64
><6>scsi4 : sata_nv
><6>scsi5 : sata_nv
><6>ata5: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001c800 irq 22
><6>ata6: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001c808 irq 22
><6>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata5.00: ATA-7: ST3250624AS, 3.AAH, max UDMA/133
><6>ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
><6>ata5.00: configured for UDMA/133
><6>ata6: SATA link down (SStatus 0 SControl 300)
><5>scsi 4:0:0:0: Direct-Access     ATA      ST3250624AS      3.AA PQ: 0 ANSI: 5
><4>ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
><6>ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:0d.2 to 64
><6>scsi6 : sata_nv
><6>scsi7 : sata_nv
><6>ata7: SATA max UDMA/133 cmd 0x000000000001c400 ctl 0x000000000001c002 bmdma 0x000000000001b400 irq 21
><6>ata8: SATA max UDMA/133 cmd 0x000000000001bc00 ctl 0x000000000001b802 bmdma 0x000000000001b408 irq 21
><6>ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata7.00: ATA-7: ST3250624AS, 3.AAH, max UDMA/133
><6>ata7.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
><6>ata7.00: configured for UDMA/133
><6>ata8: SATA link down (SStatus 0 SControl 300)
><5>scsi 6:0:0:0: Direct-Access     ATA      ST3250624AS      3.AA PQ: 0 ANSI: 5
><6>ACPI: Fan [FAN] (on)
><6>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
><6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
><4>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
><6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:10.0 to 64
><6>forcedeth: using HIGHDMA
><6>eth0: forcedeth.c: subsystem: 01043:81fb bound to 0000:00:10.0
><4>ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 23
><6>ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [AMC1] -> GSI 23 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:11.0 to 64
><6>forcedeth: using HIGHDMA
><6>eth1: forcedeth.c: subsystem: 01043:81fb bound to 0000:00:11.0
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><4>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
><6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
><7>PCI: Setting latency timer of device 0000:00:0a.0 to 64
><6>ohci_hcd 0000:00:0a.0: OHCI Host Controller
><6>ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
><6>ohci_hcd 0000:00:0a.0: irq 22, io mem 0xfe02f000
><5>sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda2 sda3 sda4
><5>sd 2:0:0:0: [sda] Attached SCSI disk
><5>sd 4:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
><5>sd 4:0:0:0: [sdb] Write Protect is off
><7>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 4:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
><5>sd 4:0:0:0: [sdb] Write Protect is off
><7>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb:<6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: OHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default ohci_hcd
><6>usb usb1: SerialNumber: 0000:00:0a.0
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 10 ports detected
><4> sdb1 sdb2 sdb3 sdb4
><5>sd 4:0:0:0: [sdb] Attached SCSI disk
><5>sd 6:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
><5>sd 6:0:0:0: [sdc] Write Protect is off
><7>sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
><5>sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 6:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
><5>sd 6:0:0:0: [sdc] Write Protect is off
><7>sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
><5>sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdc: sdc1 sdc2 sdc3 sdc4
><5>sd 6:0:0:0: [sdc] Attached SCSI disk
><4>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
><6>ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:0a.1 to 64
><6>ehci_hcd 0000:00:0a.1: EHCI Host Controller
><6>ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2
><6>ehci_hcd 0000:00:0a.1: debug port 1
><7>PCI: cache line size of 64 is not supported by device 0000:00:0a.1
><6>ehci_hcd 0000:00:0a.1: irq 21, io mem 0xfe02e000
><6>ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb2: new device found, idVendor=0000, idProduct=0000
><6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: EHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
><6>usb usb2: SerialNumber: 0000:00:0a.1
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 10 ports detected
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>usb 1-2: new low speed USB device using ohci_hcd and address 2
><6>usb 1-2: new device found, idVendor=046d, idProduct=c505
><6>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 1-2: Product: USB Receiver
><6>usb 1-2: Manufacturer: Logitech
><6>usb 1-2: configuration #1 chosen from 1 choice
><6>usb 1-3: new full speed USB device using ohci_hcd and address 3
><6>usb 1-3: new device found, idVendor=0a12, idProduct=0001
><6>usb 1-3: new device strings: Mfr=0, Product=0, SerialNumber=0
><6>usb 1-3: configuration #1 chosen from 1 choice
><6>usb 1-4: new full speed USB device using ohci_hcd and address 4
><4>usb 1-4: config 1 has an invalid descriptor of length 24, skipping remainder of the config
><3>usb 1-4: string descriptor 0 read error: -22
><6>usb 1-4: new device found, idVendor=05d8, idProduct=4002
><6>usb 1-4: new device strings: Mfr=0, Product=2, SerialNumber=0
><6>usb 1-4: configuration #1 chosen from 1 choice
><5>scsi 0:0:0:0: Attached scsi generic sg0 type 5
><5>scsi 0:0:1:0: Attached scsi generic sg1 type 5
><5>sd 2:0:0:0: Attached scsi generic sg2 type 0
><5>sd 4:0:0:0: Attached scsi generic sg3 type 0
><5>sd 6:0:0:0: Attached scsi generic sg4 type 0
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><4>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
><6>ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:0e.1 to 64
><6>parport_pc 00:09: reported by Plug and Play ACPI
><6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
><6>Bluetooth: Core ver 2.11
><6>NET: Registered protocol family 31
><6>Bluetooth: HCI device and connection manager initialized
><6>Bluetooth: HCI socket layer initialized
><6>Bluetooth: HCI USB driver ver 2.9
><6>usbcore: registered new interface driver hci_usb
><6>input: Power Button (FF) as /class/input/input1
><6>ACPI: Power Button (FF) [PWRF]
><6>input: Power Button (CM) as /class/input/input2
><6>ACPI: Power Button (CM) [PWRB]
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>shpchp: HPC vendor_id 1033 device_id 125 ss_vid 0 ss_did 0
><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
><6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
><4>rtc_cmos: probe of 00:04 failed with error -16
><6>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
><6>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
><6>usbcore: registered new interface driver hiddev
><6>input: Logitech USB Receiver as /class/input/input3
><6>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:0a.0-2
><6>input: Logitech USB Receiver as /class/input/input4
><6>input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:0a.0-2
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><4>nvidia: module license 'NVIDIA' taints kernel.
><4>ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
><6>ACPI: PCI Interrupt 0000:09:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:09:00.0 to 64
><4>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.09  Fri Jan 11 14:04:37 PST 2008
><4>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
><6>ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
><4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 0:0:0:0: Attached scsi CD-ROM sr0
><4>sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
><7>sr 0:0:1:0: Attached scsi CD-ROM sr1
><6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fdfff000-fdfff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
><6>Bluetooth: L2CAP ver 2.8
><6>Bluetooth: L2CAP socket layer initialized
><6>Bluetooth: RFCOMM socket layer initialized
><6>Bluetooth: RFCOMM TTY layer initialized
><6>Bluetooth: RFCOMM ver 1.8
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>md: md0 stopped.
><6>md: bind<sdb4>
><6>md: bind<sda4>
><6>md: bind<sdc4>
><6>raid5: automatically using best checksumming function: generic_sse
><4>   generic_sse:  7431.000 MB/sec
><4>raid5: using function: generic_sse (7431.000 MB/sec)
><4>raid6: int64x1   2234 MB/s
><4>raid6: int64x2   2898 MB/s
><4>raid6: int64x4   2688 MB/s
><4>raid6: int64x8   2397 MB/s
><4>raid6: sse2x1    3405 MB/s
><4>raid6: sse2x2    4505 MB/s
><4>raid6: sse2x4    4608 MB/s
><4>raid6: using algorithm sse2x4 (4608 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><6>raid5: device sdc4 operational as raid disk 0
><6>raid5: device sda4 operational as raid disk 2
><6>raid5: device sdb4 operational as raid disk 1
><6>raid5: allocated 3212kB for md0
><4>raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
><4>RAID5 conf printout:
><4> --- rd:3 wd:3
><4> disk 0, o:1, dev:sdc4
><4> disk 1, o:1, dev:sdb4
><4> disk 2, o:1, dev:sda4
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000bcd56c]
><6>loop: module loaded
><5>REISERFS (device dm-0): found reiserfs format "3.6" with standard journal
><5>REISERFS (device dm-0): using ordered data mode
><4>reiserfs: using flush barriers
><5>REISERFS (device dm-0): journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device dm-0): checking transaction log (dm-0)
><4>reiserfs: disabling flush barriers on dm-0
><5>REISERFS (device dm-0): Using r5 hash to sort names
><6>AppArmor: AppArmor initialized
><5>audit(1210339215.945:2):  type=1505 info="AppArmor initialized" pid=2366
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Fri May  9 13:19:51 2008
>
>Creating device nodes with udev
>resume device  not found (ignoring)
>Waiting for device /dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 to appear:  ok
>fsck 1.40.2 (12-Jul-2007)
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 
>/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1: clean, 204758/2088960 files, 1288769/4174884 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri May  9 15:19:59 2008
>
><notice>boot.blktrace start
>done
><notice>'boot.blktrace start' exits with status 0
><notice>boot.udev start
>Starting udevd udevd-event[2091]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it
>
>done
><notice>'boot.udev start' exits with status 0
><notice>boot.rootfsck start
>Activating swap-devices in /etc/fstab...
>donemount: according to mtab, /dev/sda1 is already mounted on /
>
><notice>'boot.rootfsck start' exits with status 0
><notice>boot.loadmodules start
>Loading required kernel modules
>done<notice>'boot.loadmodules start' exits with status 0
><notice>boot.device-mapper start
>Activating device mapper...
>done
><notice>'boot.device-mapper start' exits with status 0
><notice>boot.md start
>Starting MD Raid mdadm: /dev/md0 has been started with 3 drives.
><notice>'boot.md start' exits with status 0
><notice>boot.lvm start
>Waiting for udev to settle...
>Scanning for LVM volume groups...
>  Reading all physical volumes.  This may take a while...
>  Found volume group "vg0" using metadata type lvm2
>Activating LVM volume groups...
>  2 logical volume(s) in volume group "vg0" now active
>done
><notice>'boot.lvm start' exits with status 0
><notice>boot.localfs start
>Checking file systems...
>fsck 1.40.2 (12-Jul-2007)
>Reiserfs super block in block 16 on 0xfd00 of format 3.6 with standard journal
>Blocks (total/free): 52428800/37650763 by 4096 bytes
>Filesystem is clean
>Replaying journal: 
>Replaying journal: Done.
>
>Reiserfs journal '/dev/vg0/space' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..  ^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^Hfinished
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/mapper/vg0-space on /space type reiserfs (rw,acl,user_xattr)
>done<notice>'boot.localfs start' exits with status 0
><notice>boot.apparmor start
>Mounting securityfs on /sys/kernel/security done
>Loading AppArmor module done
>Loading AppArmor profiles done
><notice>'boot.apparmor start' exits with status 0
><notice>boot.cleanup start
><notice>'boot.cleanup start' exits with status 0
><notice>boot.clock start
>Setting up the hardware clockdone
><notice>'boot.clock start' exits with status 0
><notice>boot.cycle start
><notice>'boot.cycle start' exits with status 6
><notice>boot.klog start
>Creating /var/log/boot.msg
>done<notice>killproc: kill(1303,29)
><notice>'boot.klog start' exits with status 0
><notice>boot.proc start
><notice>'boot.proc start' exits with status 0
><notice>boot.scpm start
><notice>'boot.scpm start' exits with status 0
><notice>boot.swap start
>Activating remaining swap-devices in /etc/fstab...
>done<notice>'boot.swap start' exits with status 0
><notice>boot.udev_retry start
>Retry device configurationdone
><notice>'boot.udev_retry start' exits with status 0
><notice>setserial start
>Configuring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>Configured serial ports
>done<notice>'setserial start' exits with status 0
><notice>boot.ldconfig start
><notice>'boot.ldconfig start' exits with status 0
><notice>boot.localnet start
>Setting up hostname 'xanthos'done
>Setting up loopback interface lo -o rc manual
>
>    lo        
>lo lo -o rc manual
>unknown option rc ignored
>unknown option manual ignored
>'lo' is not wireless, exiting
>    lo        IP address: 127.0.0.1/8   
>Handling Index <>:
>     IPADDR             = 127.0.0.1
>     PREFIXLEN          = 8
>     CHECK_DUPLICATE_IP = no
>lo lo -o rc manual
>unknown option manual ignored
>calling: ip route replace to 127/8 dev lo  ---> OK
>lo lo -o rc manual
>unknown option rc
>unknown option manual
>No services to handle for 'lo lo'
>executing additional global start script if-up.d/50-ntp
>Checking for network time protocol daemon (NTPD): unused
>Can't determine current runlevel
>executing additional global start script if-up.d/SuSEfirewall2
>done
><notice>'boot.localnet start' exits with status 0
><notice>boot.sysctl start
>Setting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 0
>fs.inotify.max_user_watches = 65536
>done
><notice>'boot.sysctl start' exits with status 0
><notice>boot.ipconfig start
>Enabling syn flood protectiondone
>Enabling IP forwardingdone
>Enabling IPv6 forwardingdone
>Disabling IPv6 privacydone
>done
><notice>'boot.ipconfig start' exits with status 0
>System Boot Control: The system has been set up
>Skipped features: boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(1303,3)
>
>INIT: Entering runlevel: 3
>
>
>
>Boot logging started on /dev/tty1(/dev/console) at Fri May  9 13:20:22 2008
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 3
><notice>Starting acpid  ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/sbin/acpid ]
>acpid: starting up
>
>
>done
><notice>'acpid start' exits with status 0
><notice>dbus start
>acpid: 0 rules loaded
>
>
>Starting D-Bus daemonUnknown username "gdm" in message bus configuration file
>acpid start
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/consoledone
><notice>'dbus start' exits with status 0
><notice>fbset start
><notice>'fbset start' exits with status 0
><notice>random start
>Initializing random number generatordone
><notice>'random start' exits with status 0
><notice>resmgr start
>Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>done
><notice>'resmgr start' exits with status 0
><notice>consolekit start
>Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
>done
><notice>'consolekit start' exits with status 0
><notice>haldaemon start
>Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>done
>Loading CPUFreq modulesdone
><notice>'haldaemon start' exits with status 0
><notice>network start
>start
>
>CONFIG            = 
>INTERFACE         = 
>AVAILABLE_IFACES  =   eth0 eth1
>PHYSICAL_IFACES   =  eth0 eth1
>BONDING_IFACES    = 
>VLAN_IFACES       = 
>DIALUP_IFACES     = 
>TUNNEL_IFACES     = 
>BRIDGE_IFACES     =  tmpbr0
>SLAVE_IFACES      = 
>MANDATORY_DEVICES =  eth0 eth1 __NSC__ 
>SKIP              = 
>Setting up network interfaces:
>lo -o rc onboot
>
>    lo        
>lo lo -o rc onboot
>unknown option rc ignored
>'lo' is not wireless, exiting
>    lo        IP address: 127.0.0.1/8   
>Handling Index <>:
>     IPADDR             = 127.0.0.1
>     PREFIXLEN          = 8
>     CHECK_DUPLICATE_IP = no
>acpid: client connected from 3130[101:102]
>
>
>acpid: 1 client rule loaded
>
>
>lo lo -o rc onboot
>calling: ip route replace to 127/8 dev lo  ---> OK
>lo lo -o rc onboot
>unknown option rc
>No services to handle for 'lo lo'
>executing additional global start script if-up.d/50-ntp
>Checking for network time protocol daemon (NTPD): unused
>executing additional global start script if-up.d/SuSEfirewall2
>    lo        returned 0
>doneeth0 -o rc onboot
>
>    eth0      device: nVidia Corporation MCP55 Ethernet (rev a2)
>eth0 eth0 -o rc onboot
>unknown option rc ignored
>'eth0' is not wireless, exiting
>eth0 eth0 -o rc onboot
>Starting service dhcp client on eth0
>    eth0      (DHCP) . <notice>pidofproc: dhcpcd 3311
>IP/Netmask: 192.168.110.1 / 255.255.255.0 
>eth0 eth0 -o rc onboot
>calling: ip route replace to 169.254.0.0/16 dev eth0  ---> OK
>    eth0      returned 0
>doneeth1 -o rc onboot
>
>    eth1      device: nVidia Corporation MCP55 Ethernet (rev a2)
>eth1 eth1 -o rc onboot
>unknown option rc ignored
>'eth1' is not wireless, exiting
>eth1 eth1 -o rc onboot
><notice>checkproc: /sbin/dhcpcd 3373
>Starting service dhcp client on eth1
>    eth1      (DHCP) . IP/Netmask: 172.16.0.1 / 255.255.255.0 ('xanthos') 
>eth1 eth1 -o rc onboot
>    eth1      returned 0
>done... still waiting for hotplug devices:
>SUCCESS_IFACES= lo eth0 eth1
>MANDATORY_DEVICES= eth0 eth1 __NSC__
>... final
>SUCCESS_IFACES= lo eth0 eth1
>MANDATORY_DEVICES=
>FAILED=0
>tmpbr0 -o rc onboot
>
>    tmpbr0    
>    tmpbr0    Startmode is 'manual'
>    tmpbr0    returned 5
>skippednoiface -o rc onboot
>Setting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
><notice>'network start' exits with status 0
><notice>avahi-daemon start
>Starting Avahi daemon<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
>done
><notice>'avahi-daemon start' exits with status 0
><notice>owcimomd start
>Starting the OpenWBEM CIMOM Daemon<notice>startproc: execve (/usr/sbin/owcimomd) [ /usr/sbin/owcimomd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/usr/sbin/owcimomd ]
>done
><notice>'owcimomd start' exits with status 0
><notice>syslog start
>Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng -a /var/lib/dhcp/dev/log ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/sbin/klogd ]
>done
><notice>'syslog start' exits with status 0
><notice>auditd start
>Starting auditd <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/sbin/auditd ]
>done
><notice>'auditd start' exits with status 0
><notice>avahi-dnsconfd start
>Starting Avahi DNS Configuration daemon<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
>done
><notice>'avahi-dnsconfd start' exits with status 0
><notice>portmap start
>Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/sbin/portmap ]
>done
><notice>'portmap start' exits with status 0
><notice>splash_early start
><notice>'splash_early start' exits with status 0
><notice>nfs start
>Starting NFS client services: sm-notifyBackgrounding to notify hosts...
> gssd<notice>startproc: execve (/usr/sbin/rpc.gssd) [ /usr/sbin/rpc.gssd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/usr/sbin/rpc.gssd ]
> idmapd<notice>startproc: execve (/usr/sbin/rpc.idmapd) [ /usr/sbin/rpc.idmapd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/usr/sbin/rpc.idmapd ]
>done
><notice>'nfs start' exits with status 0
><notice>alsasound start
><notice>'alsasound start' exits with status 0
><notice>irq_balancer start
>Starting irqbalance <notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
>done
><notice>'irq_balancer start' exits with status 0
><notice>kbd start
>Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
>doneKeyboard: Typematic Rate set to 30.3 cps (delay = 250 ms)
>doneLoading compose table latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>done<notice>'kbd start' exits with status 0
><notice>ntp start
>Try to get initial date and time via NTP from  192.168.110.200done
>Try to set the CMOS clockdone
>Starting network time protocol daemon (NTPD)<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
>done
><notice>'ntp start' exits with status 0
><notice>powersaved start
>Starting powersaved: <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=3 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
>done
><notice>'powersaved start' exits with status 0
><notice>splash start
><notice>'splash start' exits with status 5
><notice>sshd start
>Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>done
><notice>'sshd start' exits with status 0
><notice>nscd start
>Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>done
><notice>'nscd start' exits with status 0
><notice>postfix start
>Starting mail service (Postfix)done
><notice>'postfix start' exits with status 0
><notice>xend start
>xend unused
><notice>'xend start' exits with status 6
><notice>cron start
>Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>done
><notice>'cron start' exits with status 0
><notice>libvirtd start
>Starting libvirtd <notice>startproc: execve (/usr/sbin/libvirtd) [ /usr/sbin/libvirtd -d ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/usr/sbin/libvirtd ]
>done
><notice>'libvirtd start' exits with status 0
><notice>xendomains start
>xendomains unused
><notice>'xendomains start' exits with status 6
><notice>stopblktrace start
>done
><notice>'stopblktrace start' exits with status 0
>Master Resource Control: runlevel 3 has been reached
>Skipped services in runlevel 3: splash xend xendomains
><notice>killproc: kill(2696,3)
>
>Boot logging started on /dev/tty5(/dev/console) at Fri May  9 13:21:05 2008
>
>Master Resource Control: previous runlevel: 3, switching to runlevel: 5
><notice>earlysyslog start
><notice>'earlysyslog start' exits with status 0
><notice>earlyxdm start
><notice>'earlyxdm start' exits with status 0
><notice>kbd start
><notice>'kbd start' exits with status 0
><notice>xdm start
>Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux PROFILE=default ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty5 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= LANG=de_DE.UTF-8 PREVLEVEL=3 LINES=25 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250624AS_4ND3LX0Q-part1 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
>done
><notice>'xdm start' exits with status 0
>Master Resource Control: runlevel 5 has been reached
><notice>killproc: kill(4571,3)

Actions: View

Attachments on bug 335486: 195057 | 213807 | 213890 | 217033 | 217035 | 217048 | 217531 | 217617 | 217913 | 218600 | 260717 | 260718 | 260719 | 260720 | 264188 | 265808