Attachment 215081 Details for Bug 389759

boot.msg

boot.msg (text/plain), 45.16 KB, created by Christian Boltz on 2008-05-14 10:18:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Christian Boltz

Created: 2008-05-14 10:18:34 UTC

Size: 45.16 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.25.2-2-default
>Loaded 28385 symbols from /boot/System.map-2.6.25.2-2-default.
>Symbols match kernel version 2.6.25.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.25.2-2-default (geeko@buildhost) (gcc version 4.3.1 20080425 (prerelease) [gcc-4_3-branch revision 134659] (SUSE Linux) ) #1 SMP 2008-05-07 18:33:03 +0200
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
><4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
><4> BIOS-e820: 000000003ff70000 - 000000003ff7b000 (ACPI data)
><4> BIOS-e820: 000000003ff7b000 - 000000003ff80000 (ACPI NVS)
><4> BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
><4> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
><4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
><5>127MB HIGHMEM available.
><5>896MB LOWMEM available.
><6>Scan SMP from c0000000 for 1024 bytes.
><6>Scan SMP from c009fc00 for 1024 bytes.
><6>Scan SMP from c00f0000 for 65536 bytes.
><6>Scan SMP from c009f800 for 1024 bytes.
><7>Entering add_active_range(0, 0, 262000) 0 entries of 256 used
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  Normal       4096 ->   229376
><4>  HighMem    229376 ->   262000
><4>Movable zone start PFN for each node
><4>early_node_map[1] active PFN ranges
><4>    0:        0 ->   262000
><7>On node 0 totalpages: 262000
><7>  DMA zone: 32 pages used for memmap
><7>  DMA zone: 0 pages reserved
><7>  DMA zone: 4064 pages, LIFO batch:0
><7>  Normal zone: 1760 pages used for memmap
><7>  Normal zone: 223520 pages, LIFO batch:31
><7>  HighMem zone: 254 pages used for memmap
><7>  HighMem zone: 32370 pages, LIFO batch:7
><7>  Movable zone: 0 pages used for memmap
><6>DMI present.
><6>Using APIC driver default
><4>ACPI: RSDP 000F60C0, 0014 (r0 ACER  )
><4>ACPI: RSDT 3FF74C20, 002C (r1 ACER   Cardinal 20020919  LTP        0)
><4>ACPI: FACP 3FF7AF64, 0074 (r1 ACER   Cardinal 20020919 PTL        1E)
><4>ACPI: DSDT 3FF74C4C, 6318 (r1 ACER   Cardinal 20020919 MSFT  100000D)
><4>ACPI: FACS 3FF7BFC0, 0040
><4>ACPI: BOOT 3FF7AFD8, 0028 (r1 ACER   Cardinal 20020919  LTP        1)
><5>ACPI: DMI detected: Acer
><6>ACPI: PM-Timer IO Port: 0x1008
><4>Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000)
><6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
><6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
><4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259954
><5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 resume=/dev/sda2 splash=silent  showopts vga=0x342
><6>bootsplash: silent mode.
><6>Local APIC disabled by BIOS -- you can enable it with "lapic"
><7>mapped APIC to ffffb000 (0180f000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 16384 bytes)
><4>Detected 1593.598 MHz processor.
><4>Console: colour dummy device 80x25
><6>console [tty0] enabled
><6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 1029096k/1048000k available (1947k kernel code, 18184k reserved, 1631k data, 260k init, 130496k highmem)
><6>virtual kernel memory layout:
><4>    fixmap  : 0xffdf2000 - 0xfffff000   (2100 kB)
><4>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
><4>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
><4>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
><4>      .init : 0xc0487000 - 0xc04c8000   ( 260 kB)
><4>      .data : 0xc02e6ced - 0xc047e96c   (1631 kB)
><4>      .text : 0xc0100000 - 0xc02e6ced   (1947 kB)
><6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
><7>CPA: page pool initialized 1 of 1 pages preallocated
><4>Calibrating delay using timer specific routine.. 3189.76 BogoMIPS (lpj=6379525)
><6>Security Framework initialized
><6>AppArmor: AppArmor initialized <NULL>
><6>AppArmor: Registered secondary security module capability
><6>Capability LSM initialized as secondary
><4>Mount-cache hash table entries: 512
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 1024K
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><4>Compat vDSO mapped to ffffe000.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 18k freed
><6>ACPI: Core revision 20070126
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 729 Objects with 51 Devices 197 Methods 15 Regions
><4> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>ACPI: setting ELCR to 0200 (from 0420)
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><4>CPU0: Intel(R) Pentium(R) M processor 1600MHz stepping 05
><5>SMP motherboard not detected.
><5>Local APIC not detected. Using dummy APIC emulation.
><6>Brought up 1 CPUs
><7>CPU0 attaching sched-domain:
><7> domain 0: span 00000001
><7>  groups: 00000001
><6>net_namespace: 548 bytes
><6>Booting paravirtualized kernel on bare hardware
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xfd732, last bus=2
><6>PCI: Using configuration type 1
><6>Setting up standard PCI resources
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 1 Runtime GPEs in this block
><7>ACPI: EC: Look up EC in DSDT
><4>Completing Region/Field/Buffer/Package initialization:...............................................................................
><4>Initialized 12/15 Regions 3/3 Fields 40/41 Buffers 24/29 Packages (738 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:..
><4>Executed 2 _INI methods requiring 1 _STA executions (examined 55 objects)
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using PIC for interrupt routing
><6>ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
><6>ACPI: EC: driver started in poll mode
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><6>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
><6>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
><6>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
><6>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
><6>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
><6>ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
><6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 11 12) *10
><6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 11 12) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
><6>ACPI: Power Resource [PFN0] (off)
><6>ACPI: Power Resource [PFN1] (off)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 10 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PnPBIOS: Disabled by ACPI PNP
><6>ACPI: EC: non-query interrupt received, switching to interrupt mode
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>AppArmor: AppArmor Filesystem Enabled 
><6>system 00:01: ioport range 0x1000-0x107f has been reserved
><6>system 00:01: ioport range 0x1180-0x11bf has been reserved
><6>system 00:01: ioport range 0x1c0-0x1cf has been reserved
><6>system 00:01: ioport range 0xfe00-0xfe00 has been reserved
><6>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
><6>system 00:01: ioport range 0x600-0x60f has been reserved
><6>system 00:01: ioport range 0x610-0x61f has been reserved
><6>system 00:01: iomem range 0xff800000-0xffbfffff could not be reserved
><6>system 00:01: iomem range 0xfff00000-0xffffffff could not be reserved
><6>system 00:01: iomem range 0x0-0x9ffff could not be reserved
><6>system 00:01: iomem range 0xe0000-0xfffff could not be reserved
><6>system 00:01: iomem range 0x100000-0x3fffffff could not be reserved
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: 3000-3fff
><6>  MEM window: 0xd0100000-0xd01fffff
><6>  PREFETCH window: 0x00000000d8000000-0x00000000dfffffff
><4>PCI: Bus 3, cardbus bridge: 0000:02:06.0
><6>  IO window: 0x00004000-0x000040ff
><6>  IO window: 0x00004400-0x000044ff
><6>  PREFETCH window: 0x50000000-0x53ffffff
><6>  MEM window: 0x5c000000-0x5fffffff
><4>PCI: Bus 7, cardbus bridge: 0000:02:06.1
><6>  IO window: 0x00004800-0x000048ff
><6>  IO window: 0x00004c00-0x00004cff
><6>  PREFETCH window: 0x54000000-0x57ffffff
><6>  MEM window: 0x60000000-0x63ffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 4000-4fff
><6>  MEM window: 0xd0200000-0xd05fffff
><6>  PREFETCH window: 0x0000000050000000-0x0000000057ffffff
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
><7>PCI: setting IRQ 10 as level-triggered
><6>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
><4>PCI: Enabling device 0000:02:06.1 (0080 -> 0083)
><6>ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:02:06.1 to 64
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
><6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 4728k freed
><6>Simple Boot Flag at 0x37 set to 0x1
><6>Machine check exception polling timer started.
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1210759755.460:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>pci 0000:01:00.0: Boot video device
><6>vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 11484k, total 65536k
><6>vesafb: mode is 1400x1050x16, linelength=2800, pages=21
><6>vesafb: protected mode interface info at c000:54bf
><6>vesafb: pmi: set display start = c00c552d, set palette = c00c5567
><6>vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4 
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...
><6>bootsplash: silentjpeg size 100197 bytes
><6>bootsplash: ...found (1400x1050, 36741 bytes, v3).
><4>Console: switching to colour frame buffer device 171x61
><7>Switched to high resolution mode on CPU 0
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
><6>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
><4>floppy0: no floppy controllers found
><6>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: PC Speaker as /devices/platform/pcspkr/input/input0
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>NET: Registered protocol family 1
><4>Using IPI No-Shortcut mode
><4>registered taskstats version 1
><6>Freeing unused kernel memory: 260k freed
><6>Write protecting the kernel read-only data: 1444k
><6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
><6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
><6>ACPI: ACPI0007:00 is registered as cooling_device0
><6>ACPI: LNXTHERM:01 is registered as thermal_zone0
><4>Marking TSC unstable due to: TSC halts in idle.
><6>ACPI: Thermal Zone [THRM] (24 C)
><6>No dock devices found.
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><7>ata_piix 0000:00:1f.1: version 2.12
><4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
><4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
><6>scsi0 : ata_piix
><6>scsi1 : ata_piix
><6>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
><6>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
><6>ata1.00: ATA-6: ST94011A, 3.05, max UDMA/100
><6>ata1.00: 78140160 sectors, multi 16: LBA48 
><6>ata1.00: configured for UDMA/100
><4>Clocksource tsc unstable (delta = -155407344 ns)
><7>ata2.01: NODEV after polling detection
><6>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006
><6>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
><6>ata2.00: ATAPI: UJDA740 DVD/CDRW, 1.20, max UDMA/33
><6>ata2.00: configured for UDMA/33
><5>scsi 0:0:0:0: Direct-Access     ATA      ST94011A         3.05 PQ: 0 ANSI: 5
><5>scsi 1:0:0:0: CD-ROM            MATSHITA UJDA740 DVD/CDRW 1.20 PQ: 0 ANSI: 5
><4>ACPI: Transitioning device [FAN0] to D3
><6>ACPI: PNP0C0B:00 is registered as cooling_device1
><6>ACPI: Fan [FAN0] (off)
><4>ACPI: Transitioning device [FAN1] to D3
><6>ACPI: PNP0C0B:01 is registered as cooling_device2
><6>ACPI: Fan [FAN1] (off)
><6>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
><6>Uniform Multi-Platform E-IDE driver
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>USB Universal Host Controller Interface driver v3.0
><4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><4>Driver 'sd' needs updating - please use bus_type methods
><5>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.25.2-2-default uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:1d.0
><4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
><6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 6 ports detected
><6> sda:<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: EHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.25.2-2-default ehci_hcd
><6>usb usb2: SerialNumber: 0000:00:1d.7
><4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
><7>PCI: setting IRQ 5 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><4> sda1 sda2 sda3 <<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
><4> sda5<6>uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001820
><6>usb usb3: configuration #1 chosen from 1 choice
><4> sda6<6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><4> sda7 >
><5>sd 0:0:0:0: [sda] Attached SCSI disk
><3>hub 2-0:1.0: unable to enumerate USB device on port 3
><6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: UHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.25.2-2-default uhci_hcd
><6>usb usb3: SerialNumber: 0000:00:1d.1
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: UHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.25.2-2-default uhci_hcd
><6>usb usb4: SerialNumber: 0000:00:1d.2
><6>usb 3-1: new low speed USB device using uhci_hcd and address 2
><6>usb 3-1: configuration #1 chosen from 1 choice
><6>PM: Starting manual resume from disk
><6>usb 3-1: New USB device found, idVendor=046d, idProduct=c505
><6>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 3-1: Product: USB Receiver
><6>usb 3-1: Manufacturer: Logitech
><6>usbcore: registered new interface driver hiddev
><6>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3
><6>input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1
><6>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input4
><6>input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda5, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>scsi 1:0:0:0: Attached scsi generic sg1 type 5
><6>iTCO_vendor_support: vendor-support=0
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
><6>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
><6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
><6>parport_pc 00:08: reported by Plug and Play ACPI
><6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
><4>Driver 'sr' needs updating - please use bus_type methods
><4>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 1:0:0:0: Attached scsi CD-ROM sr0
><6>ACPI: AC Adapter [ACAD] (on-line)
><6>ACPI: Battery Slot [BAT1] (battery present)
><6>ACPI: Battery Slot [BAT2] (battery absent)
><6>Linux agpgart interface v0.103
><7>ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: found ejectable bay
><7>ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: Adding notify handler
><3>ACPI: Error installing bay notify handler
><6>ACPI: Bay [\_SB_.PCI0.IDE0.SECN.BAY1] Added
><6>ACPI: WMI: Mapper loaded
><6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
><6>rtc0: alarms up to one month, y3k
><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
><3>intel_rng: FWH not detected
><6>agpgart: Detected an Intel 855PM Chipset.
><6>agpgart: AGP aperture is 256M @ 0xe0000000
><6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
><6>ACPI: Power Button (FF) [PWRF]
><6>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
><6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
><6>ACPI: Lid Switch [LID]
><6>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
><6>ppdev: user-space parallel port driver
><6>acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
><3>acer-wmi: No or unsupported WMI interface, unable to load
><6>ACPI: Sleep Button (CM) [SLPB]
><6>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input8
><6>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
><7>ieee80211_crypt: registered algorithm 'NULL'
><6>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
><6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[d0209000-d02097ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
><6>ieee80211: 802.11 data/management/control stack, git-1.1.13
><6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
><6>Yenta: CardBus bridge found at 0000:02:06.0 [1025:001f]
><6>Yenta O2: res at 0x94/0xD4: 00/ea
><6>Yenta O2: enabling read prefetch/write burst
><6>Yenta: ISA IRQ mask 0x0818, PCI irq 10
><6>Socket status: 30000006
><6>Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
><6>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
><6>cs: IO port probe 0x4000-0x4fff: clean.
><6>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd05fffff
><6>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff
><6>ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
><6>ipw2100: Copyright(c) 2003-2006 Intel Corporation
><6>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
><6>ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
><6>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:1f.5 to 64
><6>Yenta: CardBus bridge found at 0000:02:06.1 [1025:001f]
><6>Yenta: ISA IRQ mask 0x0818, PCI irq 10
><6>Socket status: 30000410
><6>Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
><6>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
><6>cs: IO port probe 0x4000-0x4fff: clean.
><6>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd05fffff
><6>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f0000140458]
><6>b44.c:v2.0
><6>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:33:58:45
><6>cs: IO port probe 0x100-0x3af: clean.
><6>cs: IO port probe 0x100-0x3af: clean.
><6>cs: IO port probe 0x3e0-0x4ff: clean.
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>cs: IO port probe 0x3e0-0x4ff: clean.
><6>cs: IO port probe 0xc00-0xcf7: clean.
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><6>cs: IO port probe 0xc00-0xcf7: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><6>intel8x0_measure_ac97_clock: measured 66525 usecs
><6>intel8x0: clocking to 48000
><4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
><7>PCI: setting IRQ 11 as level-triggered
><6>ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
><6>ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
><5>pccard: PCMCIA card inserted into slot 1
><6>cs: memory probe 0xd0200000-0xd05fffff: excluding 0xd0200000-0xd023ffff
><5>pcmcia: registering new device pcmcia1.0
><6>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:1f.6 to 64
><6>Adding 1052248k swap on /dev/sda2.  Priority:42 extents:1 across:1052248k
><6>device-mapper: uevent: version 1.0.3
><6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
><6>loop: module loaded
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda7, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>bootsplash: status on console 0 changed to on
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on dm-0, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>bootsplash: status on console 0 changed to on
><4>fuse init (API version 7.9)
><5>type=1505 audit(1210759785.028:2): operation="profile_load" name="/bin/ping" name2="default" pid=1771
><5>type=1505 audit(1210759785.088:3): operation="profile_load" name="/home/tmp/testbash" name2="default" pid=1798
><5>type=1505 audit(1210759785.136:4): operation="profile_load" name="/sbin/klogd" name2="default" pid=1799
><5>type=1505 audit(1210759785.204:5): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1800
><5>type=1505 audit(1210759785.272:6): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1801
><5>type=1505 audit(1210759785.301:7): operation="profile_load" name="/usr/bin/vim-enhanced" name2="default" pid=1802
><5>type=1505 audit(1210759785.364:8): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1803
><5>type=1505 audit(1210759785.440:9): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1804
><5>type=1505 audit(1210759785.516:10): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1812
><5>type=1505 audit(1210759785.688:11): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1818
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Wed May 14 10:09:19 2008
>
>Creating device nodes with udev
>Trying manual resume from /dev/sda2
>Invoking userspace resume from /dev/sda2
>resume: libgcrypt version: 1.4.0
>Trying manual resume from /dev/sda2
>Invoking in-kernel resume from /dev/sda2
>Waiting for device /dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 to appear:  ok
>fsck 1.40.8 (13-Mar-2008)
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 
>stablesys: clean, 393154/1836928 files, 3378680/3670844 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed May 14 12:09:25 2008
>
>Enabling syn flood protectiondone
>Enabling IP forwardingdone
>done
>done
>Setting scheduling timeslices unused
>Starting udevd: done
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>donemount: according to mtab, /dev/sda5 is already mounted on /
>
>Starting MD Raid unused
>Activating device mapper...
>done
>Waiting for udev to settle...
>Scanning for LVM volume groups...
>  Reading all physical volumes.  This may take a while...
>  No volume groups found
>  No volume groups found
>Activating LVM volume groups...
>  No volume groups found
>done
>Checking file systems...
>fsck 1.40.8 (13-Mar-2008)
>testroot: clean, 8923/858176 files, 1654586/1714930 blocks
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda7 on /testroot type ext3 (rw,acl,user_xattr)
>/dev/sda1 on /windows/c type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0007,utf8=true)
>doneActivating crypto devices using /etc/cryptotab ... 
>ehci-hcd ohci-hcd uhci-hcd usb-ohci usb-uhci Loading keymap i386/qwertz/escape-capslock.map
>doneStop Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:iso8859-1
>donePlease enter passphrase for /dev/sda6: Please enter passphrase for /dev/sda6: Please enter passphrase for /dev/sda6: home: clean, 203473/1771904 files, 3494961/3540316 blocks
>/dev/sda6...done
>Loading fuse module done
>Mounting fuse control filesystemdone
>Mounting securityfs on /sys/kernel/security done
>Loading AppArmor profiles done
><notice>killproc: kill(604,29)
>Creating /var/log/boot.msg
>doneActivating remaining swap-devices in /etc/fstab...
>doneConfiguring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>Configured serial ports
>doneSetting up hostname 'cboltz'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>Can't determine current runlevel
>done
>System Boot Control: The system has been set up
>Skipped features: boot.sched boot.md boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(604,3)
>
>INIT: 
>Boot logging started on /dev/tty1(/dev/console) at Wed May 14 12:09:49 2008
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
><notice>Entering runlevel: 5
>
>
>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>Starting resource managerdone
>Starting D-Bus daemon<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng -a /var/lib/dhcp/dev/log -a /var/lib/named/dev/log -a /var/lib/ntp/dev/log ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PWD=/ PREVLEVEL=N LINES=61 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/sbin/acpid ]
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PWD=/ PREVLEVEL=N LINES=61 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>Starting acpid done
>acpid: starting up
>
>
>done
>io.c: bind_unix_socket(): bind failed /var/lib/dhcp/dev/log (Address already in use)
>Error initializing configuration, exiting.
>Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
>done
>Loading CPUFreq modulesdone
>Starting HAL daemonStarting Firewall Initialization (phase 1 of 2) done
>Loading keymap i386/qwertz/escape-capslock.map
>doneLoading compose table latin1.adddone
>Stop Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:iso8859-1
>doneacpid: client connected from 2465[105:105]
>
>
>acpid: 1 client rule loaded
>
>
>Starting irqbalance unused
>Initializing random number generatordone
>done
>Setting up network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>done    eth0      
>    eth0      IP address: 10.12.80.30/24   
>Error while executing:
>   Command 'ip route replace to 10.12.80.1/24 via 10.12.80.1 dev eth0' returned:
>  RTNETLINK answers: Invalid argument
>   Configuration line: 10.12.80.1 10.12.80.1 255.255.255.0 eth0  
>Checking for network time protocol daemon (NTPD): unused
>done    eth1      device: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
>    eth1      starting wpa_supplicant
>modprobe: WARNING: Error inserting padlock_aes (/lib/modules/2.6.25.2-2-default/kernel/drivers/crypto/padlock-aes.ko): No such device
>
>
><notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 QTDIR=/usr/lib/qt3 http_proxy=http://localhost:8080 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PWD=/ LANG=de_DE@euro PREVLEVEL=N LINES=61 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost WINDOWMANAGER=/usr/bin/kde LC_CTYPE=de_DE.UTF-8 SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
>    eth1      (DHCP) . . . . . acpid: client connected from 3172[0:0]
>
>
>acpid: 1 client rule loaded
>
>
>no IP address yet... backgrounding. 
>waiting
>    eth-id-00:c0:9f:33:58:45            No interface found
>failed    modem0    
>    modem0    Startmode is 'manual'
>skippedSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .failed
>Starting service kdmdone
>Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/sbin/portmap ]
>done
><notice>checkproc: /opt/kde3/bin/kdm 3160
>Starting auditd <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/sbin/auditd ]
>done
>Starting Avahi daemon<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
>.<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
>Starting cupsddone
>done
><notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -g -u ntp:ntp -i /var/lib/ntp -c /etc/ntp.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
>no server configured
>Starting network time protocol daemon (NTPD)done
>Starting Avahi DNS Configuration daemon<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
>done
>Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>done
>Starting mail service (Postfix)<notice>checkproc: /opt/kde3/bin/kdm 3160
>done
>Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>done
>Starting powersaved: <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
>done
>Starting SmartLink Modem driver: FATAL: Module slamr not found.
>FATAL: Module slusb not found.
>Starting service MySQL done
>acpid: received event "thermal_zone THRM 00000081 00000000"
>
>
>acpid: notifying client 2465[105:105]
>
>
>acpid: notifying client 3172[0:0]
>
>
>acpid: completed event "thermal_zone THRM 00000081 00000000"
>
>
>acpid: client connected from 3654[0:0]
>
>
>acpid: 1 client rule loaded
>
>
><notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
>Starting smartd done
><notice>startproc: execve (/usr/sbin/slmodemd) [ /usr/sbin/slmodemd --country=GERMANY /dev/slamr0 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/slmodemd ]
>done
><notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
>Starting SMPPPDdone
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Starting SSH daemondone
>acpid: received event "battery BAT1 00000080 00000001"
>
>
>acpid: notifying client 2465[105:105]
>
>
>acpid: notifying client 3172[0:0]
>
>
>acpid: notifying client 3654[0:0]
>
>
>acpid: completed event "battery BAT1 00000080 00000001"
>
>
>acpid: received event "battery BAT1 00000000 00000001"
>
>
>acpid: notifying client 2465[105:105]
>
>
>acpid: notifying client 3172[0:0]
>
>
>acpid: notifying client 3654[0:0]
>
>
>acpid: completed event "battery BAT1 00000000 00000001"
>
>
>acpid: received event "battery BAT2 00000080 00000000"
>
>
>acpid: notifying client 2465[105:105]
>
>
>acpid: notifying client 3172[0:0]
>
>
>acpid: notifying client 3654[0:0]
>
>
>acpid: completed event "battery BAT2 00000080 00000000"
>
>
>acpid: received event "battery BAT2 00000000 00000000"
>
>
>acpid: notifying client 2465[105:105]
>
>
>acpid: notifying client 3172[0:0]
>
>
>acpid: notifying client 3654[0:0]
>
>
>acpid: completed event "battery BAT2 00000000 00000000"
>
>
>acpid: received event "ac_adapter ACAD 00000000 00000001"
>
>
>acpid: notifying client 2465[105:105]
>
>
>acpid: notifying client 3172[0:0]
>
>
>acpid: notifying client 3654[0:0]
>
>
>acpid: completed event "ac_adapter ACAD 00000000 00000001"
>
>
>VMware Workstation is installed, but it has not been (correctly) configured
>for the running kernel. To (re-)configure it, invoke the
>following command: /usr/bin/vmware-config.pl.
>
><notice>startproc: execve (/usr/sbin/wwwoffled) [ /usr/sbin/wwwoffled -c /etc/wwwoffle/wwwoffle.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin:/srv/www/cgi-bin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/wwwoffled ]
>Starting service wwwoffledone
><notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd -pidfile /var/run/xinetd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
>wwwoffled[3781]: WWWOFFLE Demon Version 2.9d (with ipv6,with zlib,with gnutls) started.
>
>Starting INET services. (xinetd)done
>Starting httpd2 (prefork) <notice>startproc: execve (/usr/sbin/httpd2-prefork) [ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 get_module_list_done=true LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 get_includes_done=true PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/var/lib/apache2 SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST94011A_3KW2C49P-part5 _=/sbin/startproc DAEMON=/usr/sbin/httpd2-prefork ]
>Warning: DocumentRoot [/home/cb/zoswiki.cboltz.de] does not exist
>Warning: DocumentRoot [/home/httpd/vhosts/diehlenhof.de/httpdocs/typo3] does not exist
>Warning: DocumentRoot [/home/cb/download/validator.w3.org/validator-0_6_0/htdocs] does not exist
>done
>Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
>done
>done
>Master Resource Control: runlevel 5 has been reached
>Failed services in runlevel 5: network vmware
>Skipped services in runlevel 5: irq_balancer
><notice>killproc: kill(2052,3)

Actions: View

Attachments on bug 389759: 215081 | 215509 | 215510