Attachment 217191 Details for Bug 393024

/var/log/boot.msg

boot.msg (text/plain), 33.40 KB, created by Stefan Majewsky on 2008-05-21 10:17:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stefan Majewsky

Created: 2008-05-21 10:17:36 UTC

Size: 33.40 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.25.4-2-default
>Loaded 28401 symbols from /boot/System.map-2.6.25.4-2-default.
>Symbols match kernel version 2.6.25.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.25.4-2-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-05-16 20:46:39 +0200
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
><4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
><4> BIOS-e820: 000000003f6d0000 - 000000003f6e0000 (ACPI NVS)
><4> BIOS-e820: 000000003f6e0000 - 0000000040000000 (reserved)
><4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
><4> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
><4> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
><4> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
><4> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
><5>118MB HIGHMEM available.
><5>896MB LOWMEM available.
><6>Scan SMP from c0000000 for 1024 bytes.
><6>Scan SMP from c009fc00 for 1024 bytes.
><6>Scan SMP from c00f0000 for 65536 bytes.
><6>found SMP MP-table at [c00f7d60] 000f7d60
><7>Entering add_active_range(0, 0, 259792) 0 entries of 256 used
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  Normal       4096 ->   229376
><4>  HighMem    229376 ->   259792
><4>Movable zone start PFN for each node
><4>early_node_map[1] active PFN ranges
><4>    0:        0 ->   259792
><7>On node 0 totalpages: 259792
><7>  DMA zone: 32 pages used for memmap
><7>  DMA zone: 0 pages reserved
><7>  DMA zone: 4064 pages, LIFO batch:0
><7>  Normal zone: 1760 pages used for memmap
><7>  Normal zone: 223520 pages, LIFO batch:31
><7>  HighMem zone: 237 pages used for memmap
><7>  HighMem zone: 30179 pages, LIFO batch:7
><7>  Movable zone: 0 pages used for memmap
><6>DMI present.
><6>Using APIC driver default
><6>Intel MultiProcessor Specification v1.4
><6>    Virtual Wire compatibility mode.
><6>OEM ID: INTEL    Product ID: S. Rosa CRB  APIC at: 0xFEE00000
><4>Processor #0 6:6 APIC version 20
><6>I/O APIC #1 Version 32 at 0xFEC00000.
><4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
><6>Processors: 1
><4>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
><6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
><6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
><4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257763
><5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 resume=/dev/sda1 splash=silent vga=0x314 acpi=off
><6>bootsplash: silent mode.
><7>mapped APIC to ffffb000 (fee00000)
><7>mapped IOAPIC to ffffa000 (fec00000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 16384 bytes)
><4>Detected 1862.030 MHz processor.
><4>Console: colour dummy device 80x25
><6>console [tty0] enabled
><6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 1020148k/1039168k available (1947k kernel code, 18224k reserved, 1630k data, 260k init, 121664k highmem)
><6>virtual kernel memory layout:
><4>    fixmap  : 0xffdf2000 - 0xfffff000   (2100 kB)
><4>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
><4>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
><4>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
><4>      .init : 0xc0487000 - 0xc04c8000   ( 260 kB)
><4>      .data : 0xc02e6e9d - 0xc047e96c   (1630 kB)
><4>      .text : 0xc0100000 - 0xc02e6e9d   (1947 kB)
><6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
><7>CPA: page pool initialized 1 of 1 pages preallocated
><4>Calibrating delay using timer specific routine.. 3728.79 BogoMIPS (lpj=7457585)
><6>Security Framework initialized
><6>AppArmor: AppArmor initialized <NULL>
><6>AppArmor: Registered secondary security module capability
><6>Capability LSM initialized as secondary
><4>Mount-cache hash table entries: 512
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 1024K
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>using mwait in idle threads.
><4>Compat vDSO mapped to ffffe000.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 18k freed
><4>CPU0: Intel(R) Celeron(R) CPU          540  @ 1.86GHz stepping 01
><6>Total of 1 processors activated (3728.79 BogoMIPS).
><4>ExtINT not setup in hardware but reported by MP table
><4>ENABLING IO-APIC IRQs
><6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
><6>Brought up 1 CPUs
><7>CPU0 attaching sched-domain:
><7> domain 0: span 00000001
><7>  groups: 00000001
><6>net_namespace: 548 bytes
><6>Booting paravirtualized kernel on bare hardware
><6>NET: Registered protocol family 16
><6>PCI: PCI BIOS revision 3.00 entry at 0xfdba1, last bus=16
><6>PCI: Using configuration type 1
><6>Setting up standard PCI resources
><6>ACPI: Interpreter disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI: disabled
><6>PnPBIOS: Scanning system for PnP BIOS support...
><6>PnPBIOS: Found PnP BIOS installation structure at 0xc00f7d80
><6>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc444, dseg 0x400
><2>PNPBIOS fault.. attempting recovery.
><3>PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue
><3>PnPBIOS: You may need to reboot with the "pnpbios=off" option to operate stably
><3>PnPBIOS: Check with your vendor for an updated BIOS
><3>PnPBIOS: get_dev_node: unexpected status 0x28
><6>PnPBIOS: 0 nodes reported by PnP BIOS; 0 recorded by driver
><4>PCI: Probing PCI hardware
><7>PCI: Probing PCI hardware (bus 00)
><6>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
><6>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
><6>PCI: Transparent bridge - 0000:00:1e.0
><6>PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16
><6>PCI->APIC IRQ transform: 0000:00:1a.0[A] -> IRQ 20
><6>PCI->APIC IRQ transform: 0000:00:1a.1[B] -> IRQ 21
><6>PCI->APIC IRQ transform: 0000:00:1a.7[C] -> IRQ 20
><6>PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 21
><6>PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 16
><6>PCI->APIC IRQ transform: 0000:00:1c.1[B] -> IRQ 17
><6>PCI->APIC IRQ transform: 0000:00:1c.2[C] -> IRQ 18
><6>PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 23
><6>PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 17
><6>PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
><6>PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 23
><6>PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 19
><6>PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19
><6>PCI->APIC IRQ transform: 0000:00:1f.3[C] -> IRQ 19
><6>PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 16
><6>PCI->APIC IRQ transform: 0000:04:00.0[A] -> IRQ 17
><6>PCI->APIC IRQ transform: 0000:0f:06.0[A] -> IRQ 22
><6>PCI->APIC IRQ transform: 0000:0f:06.1[A] -> IRQ 22
><6>PCI->APIC IRQ transform: 0000:0f:06.2[A] -> IRQ 22
><6>PCI->APIC IRQ transform: 0000:0f:06.3[A] -> IRQ 22
><6>AppArmor: AppArmor Filesystem Enabled 
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: 2000-2fff
><6>  MEM window: 0xf6000000-0xf7ffffff
><6>  PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
><6>PCI: Bridge: 0000:00:1c.1
><6>  IO window: 3000-3fff
><6>  MEM window: 0xf8000000-0xf9ffffff
><6>  PREFETCH window: 0x00000000f2000000-0x00000000f3ffffff
><6>PCI: Bridge: 0000:00:1c.2
><6>  IO window: 4000-4fff
><6>  MEM window: 0xfa000000-0xfbffffff
><6>  PREFETCH window: 0x00000000f4000000-0x00000000f5ffffff
><4>PCI: Bus 16, cardbus bridge: 0000:0f:06.0
><6>  IO window: 0x00005000-0x000050ff
><6>  IO window: 0x00005400-0x000054ff
><6>  PREFETCH window: 0x50000000-0x53ffffff
><6>  MEM window: 0x58000000-0x5bffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 5000-5fff
><6>  MEM window: 0xfc200000-0xfc2fffff
><6>  PREFETCH window: 0x0000000050000000-0x0000000053ffffff
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
><6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 4836k freed
><6>Machine check exception polling timer started.
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1211378905.568:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>pci 0000:00:02.0: Boot video device
><4>pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><7>Allocate Port Service[0000:00:1c.0:pcie02]
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.1:pcie00]
><7>Allocate Port Service[0000:00:1c.1:pcie02]
><7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.2:pcie00]
><7>Allocate Port Service[0000:00:1c.2:pcie02]
><6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 7616k
><6>vesafb: mode is 800x600x16, linelength=1600, pages=6
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...
><6>bootsplash: silentjpeg size 95134 bytes
><6>bootsplash: ...found (800x600, 169778 bytes, v3).
><4>Console: switching to colour frame buffer device 96x33
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><4>floppy0: no floppy controllers found
><6>PNP: No PS/2 controller found. Probing ports directly.
><6>i8042.c: Detected active multiplexing controller, rev 1.1.
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: PC Speaker as /devices/platform/pcspkr/input/input0
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>NET: Registered protocol family 1
><4>Using IPI No-Shortcut mode
><4>registered taskstats version 1
><6>Freeing unused kernel memory: 260k freed
><6>Write protecting the kernel read-only data: 1444k
><6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
><4>thermal: Unknown symbol acpi_processor_set_thermal_limit
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>USB Universal Host Controller Interface driver v3.0
><7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
><6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><4>ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread F775A0E0 could not acquire Mutex [1] [20070126]
><6>No dock devices found.
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.25.4-2-default uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:1a.0
><7>ahci 0000:00:1f.2: version 3.0
><6>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04713/0x204000
><6>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input2
><4>Clocksource tsc unstable (delta = 126473407 ns)
><6>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
><6>ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part 
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>scsi0 : ahci
><6>scsi1 : ahci
><6>scsi2 : ahci
><6>ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 220
><6>ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 220
><6>ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 220
><6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100
><6>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
><6>ata1.00: configured for UDMA/100
><6>ata2: SATA link down (SStatus 0 SControl 300)
><6>ata3: SATA link down (SStatus 0 SControl 300)
><5>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
><7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
><6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
><6>ehci_hcd 0000:00:1a.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
><6>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800
><6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 4 ports detected
><6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: EHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.25.4-2-default ehci_hcd
><6>usb usb2: SerialNumber: 0000:00:1a.7
><7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
><6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: UHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.25.4-2-default uhci_hcd
><6>usb usb3: SerialNumber: 0000:00:1a.1
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
><4>Driver 'sd' needs updating - please use bus_type methods
><5>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
><6>hub 4-0:1.0: 6 ports detected
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda:<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: EHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.25.4-2-default ehci_hcd
><6>usb usb4: SerialNumber: 0000:00:1d.7
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
><6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb5: Product: UHCI Host Controller
><6>usb usb5: Manufacturer: Linux 2.6.25.4-2-default uhci_hcd
><6>usb usb5: SerialNumber: 0000:00:1d.0
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
><6>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
><6>usb usb6: configuration #1 chosen from 1 choice
><6>hub 6-0:1.0: USB hub found
><6>hub 6-0:1.0: 2 ports detected
><4> sda1 sda2 sda3
><5>sd 0:0:0:0: [sda] Attached SCSI disk
><6>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb6: Product: UHCI Host Controller
><6>usb usb6: Manufacturer: Linux 2.6.25.4-2-default uhci_hcd
><6>usb usb6: SerialNumber: 0000:00:1d.1
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
><6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
><6>usb usb7: configuration #1 chosen from 1 choice
><6>hub 7-0:1.0: USB hub found
><6>hub 7-0:1.0: 2 ports detected
><6>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb7: Product: UHCI Host Controller
><6>usb usb7: Manufacturer: Linux 2.6.25.4-2-default uhci_hcd
><6>usb usb7: SerialNumber: 0000:00:1d.2
><6>PM: Starting manual resume from disk
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda2, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><6>ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
><6>Linux agpgart interface v0.103
><6>iTCO_vendor_support: vendor-support=0
><6>ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
><7>PCI: Setting latency timer of device 0000:04:00.0 to 64
><6>ndiswrapper: using IRQ 17
><4>acer_wmi: Unknown symbol wmi_evaluate_method
><4>acer_wmi: Unknown symbol wmi_has_guid
><4>acer_wmi: Unknown symbol wmi_query_block
><6>sdhci: Secure Digital Host Controller Interface driver
><6>sdhci: Copyright(c) Pierre Ossman
><6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
><6>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
><6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
><6>wlan0: ethernet device 00:1e:4c:16:4a:bb using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4311.5.conf
><6>wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
><6>agpgart: Detected an Intel 965GM Chipset.
><6>agpgart: Detected 7676K stolen memory.
><6>agpgart: AGP aperture is 256M @ 0xd0000000
><6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fc206000-fc2067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
><6>Yenta: CardBus bridge found at 0000:0f:06.0 [1025:011f]
><6>Yenta: Using CSCINT to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:0f:06.0, mfunc 0x01aa1b22, devctl 0x64
><6>Yenta: ISA IRQ mask 0x06f8, PCI irq 22
><6>Socket status: 30000006
><6>Yenta: Raising subordinate bus# of parent bus (#0f) from #10 to #13
><6>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
><6>cs: IO port probe 0x5000-0x5fff: clean.
><6>pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
><6>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
><6>sdhci: SDHCI controller found at 0000:0f:06.3 [104c:803c] (rev 0)
><6>mmc0: SDHCI at 0xfc206800 irq 22 PIO
><7>ata_piix 0000:00:1f.1: version 2.12
><7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
><6>usbcore: registered new interface driver ndiswrapper
><6>scsi3 : ata_piix
><6>scsi4 : ata_piix
><6>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
><6>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
><6>ata4.00: ATAPI: Slimtype DVD A  DS8A1P, CA11, max UDMA/33
><6>cs: IO port probe 0x100-0x3af: clean.
><6>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>cs: IO port probe 0xc00-0xcf7: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><6>ata4.00: configured for UDMA/33
><5>scsi 3:0:0:0: CD-ROM            Slimtype DVD A  DS8A1P    CA11 PQ: 0 ANSI: 5
><5>scsi 3:0:0:0: Attached scsi generic sg1 type 5
><7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
><6>hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
><7>ALSA sound/pci/hda/hda_codec.c:2860: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2864:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2868:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2869:    mono: mono_out=0x0
><7>ALSA sound/pci/hda/hda_codec.c:2877:    inputs: mic=0x19, fmic=0x18, line=0x1a, fline=0x0, cd=0x0, aux=0x0
><6>tg3.c:v3.91 (April 18, 2008)
><7>PCI: Setting latency timer of device 0000:02:00.0 to 64
><6>eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:72:09:6a:bc
><6>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
><6>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001d72ffff096abc]
><6>Uniform Multi-Platform E-IDE driver
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><4>Driver 'sr' needs updating - please use bus_type methods
><4>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 3:0:0:0: Attached scsi CD-ROM sr0
><6>loop: module loaded
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda3, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><4>fuse init (API version 7.9)
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Wed May 21 14:08:37 2008
>
>FATAL: Error inserting processor (/lib/modules/2.6.25.4-2-default/kernel/drivers/acpi/processor.ko): No such device
>WARNING: Error inserting processor (/lib/modules/2.6.25.4-2-default/kernel/drivers/acpi/processor.ko): No such device
>FATAL: Error inserting thermal (/lib/modules/2.6.25.4-2-default/kernel/drivers/acpi/thermal.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>FATAL: Error inserting fan (/lib/modules/2.6.25.4-2-default/kernel/drivers/acpi/fan.ko): No such device
>Creating device nodes with udev
>Trying manual resume from /dev/sda1
>Invoking userspace resume from /dev/sda1
>resume: libgcrypt version: 1.4.0
>Trying manual resume from /dev/sda1
>Invoking in-kernel resume from /dev/sda1
>Waiting for device /dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 to appear:  ok
>fsck 1.40.8 (13-Mar-2008)
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 
>/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2: clean, 221068/1313280 files, 1708155/5242880 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed May 21 16:08:43 2008
>
>done
>Starting udevd: done
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>donemount: according to mtab, /dev/sda2 is already mounted on /
>
>Starting MD Raid unused
>Checking file systems...
>fsck 1.40.8 (13-Mar-2008)
>/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part3: clean, 41353/3442096 files, 739894/13767705 blocks
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda3 on /home type ext3 (rw,acl,user_xattr)
>doneLoading fuse module done
>Mounting fuse control filesystemdone
>Mounting securityfs on /sys/kernel/security done
>Loading AppArmor profiles <notice>killproc: kill(493,29)
>Creating /var/log/boot.msg
>donedone
>Activating remaining swap-devices in /etc/fstab...
>doneConfiguring serial ports...
>Configured serial ports
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>net.ipv4.conf.default.promote_secondaries = 1
>net.ipv4.conf.all.promote_secondaries = 1
>done
>Turning quota on
>Checking quotas. This may take some time.
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>Setting up hostname 'linux-bb5l'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>              IP address: 127.0.0.2/8   
>done
>System Boot Control: The system has been set up
>Skipped features: boot.md
>System Boot Control: Running /etc/init.d/boot.local
>
>done<notice>killproc: kill(493,3)
>
>INIT: 
>Boot logging started on /dev/tty1(/dev/console) at Wed May 21 16:08:52 2008
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>Entering runlevel: 5
>
>
>Starting D-Bus daemondone
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>acpid: no ACPI support in kernelskipped
>Creating X Configdone
>Starting resource managerdone
><notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
>Starting ConsoleKitdone
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-800x600.cfg PWD=/ PREVLEVEL=N LINES=33 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-800x600.cfg PWD=/ PREVLEVEL=N LINES=33 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
>doneStarting Firewall Initialization (phase 1 of 2) done
>Loading compose table latin1.adddone
>Start Unicode mode
>doneLoading CPUFreq modules (CPUFreq not supported)
>Starting HAL daemondone
>Starting service kdm<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-800x600.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=33 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER= SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 _=/sbin/startproc DAEMON=/usr/bin/kdm ]
>done
>Starting the NetworkManager<notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ]
>done
>Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 _=/sbin/startproc DAEMON=/sbin/portmap ]
>done
><notice>checkproc: /usr/bin/kdm 1960
>Starting auditd <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 _=/sbin/startproc DAEMON=/sbin/auditd ]
>done
>Starting Avahi daemon<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
>.done
>Starting Avahi DNS Configuration daemon<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
>done
>Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
>done
>Starting java.binfmt_misc done
>Checking/updating CPU microcode done
>Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>done
>Starting mail service (Postfix)done
>Starting powersaved: <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
>done
>Initializing random number generatordone
>Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
>done
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: acpid
><notice>killproc: kill(1431,3)

Actions: View

Attachments on bug 393024: 217191 | 217192 | 217193 | 217194