Attachment 217192 Details for Bug 393024

dmesg output

dmesg (text/plain), 25.11 KB, created by Stefan Majewsky on 2008-05-21 10:18:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stefan Majewsky

Created: 2008-05-21 10:18:07 UTC

Size: 25.11 KB

patch

obsolete

>Linux version 2.6.25.4-2-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-05-16 20:46:39 +0200
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
> BIOS-e820: 000000003f6d0000 - 000000003f6e0000 (ACPI NVS)
> BIOS-e820: 000000003f6e0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>118MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00f7d60] 000f7d60
>Entering add_active_range(0, 0, 259792) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   259792
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   259792
>On node 0 totalpages: 259792
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 237 pages used for memmap
>  HighMem zone: 30179 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: INTEL    Product ID: S. Rosa CRB  APIC at: 0xFEE00000
>Processor #0 6:6 APIC version 20
>I/O APIC #1 Version 32 at 0xFEC00000.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Processors: 1
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257763
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2241KGE42TDE-part2 resume=/dev/sda1 splash=silent vga=0x314 acpi=off
>bootsplash: silent mode.
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1862.030 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1020148k/1039168k available (1947k kernel code, 18224k reserved, 1630k data, 260k init, 121664k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffdf2000 - 0xfffff000   (2100 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0487000 - 0xc04c8000   ( 260 kB)
>      .data : 0xc02e6e9d - 0xc047e96c   (1630 kB)
>      .text : 0xc0100000 - 0xc02e6e9d   (1947 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>Calibrating delay using timer specific routine.. 3728.79 BogoMIPS (lpj=7457585)
>Security Framework initialized
>AppArmor: AppArmor initialized <NULL>
>AppArmor: Registered secondary security module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 18k freed
>CPU0: Intel(R) Celeron(R) CPU          540  @ 1.86GHz stepping 01
>Total of 1 processors activated (3728.79 BogoMIPS).
>ExtINT not setup in hardware but reported by MP table
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
>Brought up 1 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 3.00 entry at 0xfdba1, last bus=16
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>PnPBIOS: Scanning system for PnP BIOS support...
>PnPBIOS: Found PnP BIOS installation structure at 0xc00f7d80
>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc444, dseg 0x400
>PNPBIOS fault.. attempting recovery.
>PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue
>PnPBIOS: You may need to reboot with the "pnpbios=off" option to operate stably
>PnPBIOS: Check with your vendor for an updated BIOS
>PnPBIOS: get_dev_node: unexpected status 0x28
>PnPBIOS: 0 nodes reported by PnP BIOS; 0 recorded by driver
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:1a.0[A] -> IRQ 20
>PCI->APIC IRQ transform: 0000:00:1a.1[B] -> IRQ 21
>PCI->APIC IRQ transform: 0000:00:1a.7[C] -> IRQ 20
>PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 21
>PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:1c.1[B] -> IRQ 17
>PCI->APIC IRQ transform: 0000:00:1c.2[C] -> IRQ 18
>PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 23
>PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 17
>PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
>PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 23
>PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 19
>PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19
>PCI->APIC IRQ transform: 0000:00:1f.3[C] -> IRQ 19
>PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:04:00.0[A] -> IRQ 17
>PCI->APIC IRQ transform: 0000:0f:06.0[A] -> IRQ 22
>PCI->APIC IRQ transform: 0000:0f:06.1[A] -> IRQ 22
>PCI->APIC IRQ transform: 0000:0f:06.2[A] -> IRQ 22
>PCI->APIC IRQ transform: 0000:0f:06.3[A] -> IRQ 22
>AppArmor: AppArmor Filesystem Enabled 
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: 0xf6000000-0xf7ffffff
>  PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-3fff
>  MEM window: 0xf8000000-0xf9ffffff
>  PREFETCH window: 0x00000000f2000000-0x00000000f3ffffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 4000-4fff
>  MEM window: 0xfa000000-0xfbffffff
>  PREFETCH window: 0x00000000f4000000-0x00000000f5ffffff
>PCI: Bus 16, cardbus bridge: 0000:0f:06.0
>  IO window: 0x00005000-0x000050ff
>  IO window: 0x00005400-0x000054ff
>  PREFETCH window: 0x50000000-0x53ffffff
>  MEM window: 0x58000000-0x5bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: 0xfc200000-0xfc2fffff
>  PREFETCH window: 0x0000000050000000-0x0000000053ffffff
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Unpacking initramfs... done
>Freeing initrd memory: 4836k freed
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1211378905.568:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 7616k
>vesafb: mode is 800x600x16, linelength=1600, pages=6
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 95134 bytes
>bootsplash: ...found (800x600, 169778 bytes, v3).
>Console: switching to colour frame buffer device 96x33
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>floppy0: no floppy controllers found
>PNP: No PS/2 controller found. Probing ports directly.
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 1444k
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>thermal: Unknown symbol acpi_processor_set_thermal_limit
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread F775A0E0 could not acquire Mutex [1] [20070126]
>No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.4-2-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>ahci 0000:00:1f.2: version 3.0
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input2
>Clocksource tsc unstable (delta = 126473407 ns)
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 220
>ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 220
>ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 220
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.4-2-default ehci_hcd
>usb usb2: SerialNumber: 0000:00:1a.7
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.4-2-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.1
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>hub 4-0:1.0: 6 ports detected
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: EHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.4-2-default ehci_hcd
>usb usb4: SerialNumber: 0000:00:1d.7
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.4-2-default uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
> sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25.4-2-default uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25.4-2-default uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>PM: Starting manual resume from disk
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
>Linux agpgart interface v0.103
>iTCO_vendor_support: vendor-support=0
>ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>ndiswrapper: using IRQ 17
>acer_wmi: Unknown symbol wmi_evaluate_method
>acer_wmi: Unknown symbol wmi_has_guid
>acer_wmi: Unknown symbol wmi_query_block
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>wlan0: ethernet device 00:1e:4c:16:4a:bb using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4311.5.conf
>wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fc206000-fc2067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>Yenta: CardBus bridge found at 0000:0f:06.0 [1025:011f]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:0f:06.0, mfunc 0x01aa1b22, devctl 0x64
>Yenta: ISA IRQ mask 0x06f8, PCI irq 22
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#0f) from #10 to #13
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>cs: IO port probe 0x5000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>sdhci: SDHCI controller found at 0000:0f:06.3 [104c:803c] (rev 0)
>mmc0: SDHCI at 0xfc206800 irq 22 PIO
>ata_piix 0000:00:1f.1: version 2.12
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>usbcore: registered new interface driver ndiswrapper
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata4.00: ATAPI: Slimtype DVD A  DS8A1P, CA11, max UDMA/33
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ata4.00: configured for UDMA/33
>scsi 3:0:0:0: CD-ROM            Slimtype DVD A  DS8A1P    CA11 PQ: 0 ANSI: 5
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2860: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2864:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2868:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2869:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2877:    inputs: mic=0x19, fmic=0x18, line=0x1a, fline=0x0, cd=0x0, aux=0x0
>tg3.c:v3.91 (April 18, 2008)
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:72:09:6a:bc
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001d72ffff096abc]
>Uniform Multi-Platform E-IDE driver
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>type=1505 audit(1211378929.760:2): operation="profile_load" name="/bin/ping" name2="default" pid=1201
>type=1505 audit(1211378929.780:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1202
>type=1505 audit(1211378929.812:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1203
>type=1505 audit(1211378929.848:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1204
>type=1505 audit(1211378929.884:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1205
>type=1505 audit(1211378929.916:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1206
>type=1505 audit(1211378929.948:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1207
>type=1505 audit(1211378929.984:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1208
>type=1505 audit(1211378930.036:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1209
>type=1505 audit(1211378930.088:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1215
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>powernow_k8: Unknown symbol acpi_processor_notify_smm
>powernow_k8: Unknown symbol acpi_processor_unregister_performance
>powernow_k8: Unknown symbol acpi_processor_register_performance
>powernow_k7: Unknown symbol acpi_processor_notify_smm
>powernow_k7: Unknown symbol acpi_processor_unregister_performance
>powernow_k7: Unknown symbol acpi_processor_register_performance
>acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
>acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
>acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
>acpi_cpufreq: Unknown symbol acpi_processor_register_performance
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 17
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>bootsplash: status on console 0 changed to on
>[drm] Initialized drm 1.1.0 20060810
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=141.30.81.212 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=141.30.81.212 DST=224.0.0.251 LEN=372 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=352 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=141.30.81.212 DST=224.0.0.251 LEN=260 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=240 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=141.30.81.212 DST=224.0.0.251 LEN=372 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=352 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=141.30.81.212 DST=224.0.0.251 LEN=372 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=352 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=141.30.81.212 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=141.30.81.212 DST=224.0.0.251 LEN=386 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=366 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=141.30.81.212 DST=224.0.0.251 LEN=342 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=322 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=141.30.81.212 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=141.30.81.212 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=141.30.81.212 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=141.30.81.212 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=141.30.81.212 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44

Actions: View

Attachments on bug 393024: 217191 | 217192 | 217193 | 217194