Attachment 226154 Details for Bug 406638

dmesg output after a fresh boot

dmesg.txt (text/plain), 37.30 KB, created by Pavel Koshevoy on 2008-07-06 18:25:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pavel Koshevoy

Created: 2008-07-06 18:25:01 UTC

Size: 37.30 KB

patch

obsolete

>Linux version 2.6.25.5-1.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-06-07 01:55:22 +0200
>Command line: root=/dev/md0 resume=/dev/sdc3 splash=silent vga=0x31a
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bff80000 (usable)
> BIOS-e820: 00000000bff80000 - 00000000bff8e000 (ACPI data)
> BIOS-e820: 00000000bff8e000 - 00000000bffe0000 (ACPI NVS)
> BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 786304) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
>end_pfn_map = 1310720
>DMI 2.4 present.
>ACPI: RSDP 000FAF20, 0024 (r2 ACPIAM)
>ACPI: XSDT BFF80100, 005C (r1 A_M_I_ OEMXSDT  11000716 MSFT       97)
>ACPI: FACP BFF80290, 00F4 (r3 A_M_I_ OEMFACP  11000716 MSFT       97)
>ACPI: DSDT BFF80590, 9560 (r1  A0543 A0543000        0 INTL 20060113)
>ACPI: FACS BFF8E000, 0040
>ACPI: APIC BFF80390, 0080 (r1 A_M_I_ OEMAPIC  11000716 MSFT       97)
>ACPI: OEMB BFF8E040, 0066 (r1 A_M_I_ AMI_OEM  11000716 MSFT       97)
>ACPI: HPET BFF89AF0, 0038 (r1 A_M_I_ OEMHPET  11000716 MSFT       97)
>ACPI: MCFG BFF89B30, 003C (r1 A_M_I_ OEMMCFG  11000716 MSFT       97)
>ACPI: SSDT BFF8E0B0, 0208 (r1    AMI   CPU1PM        1 INTL 20060113)
>ACPI: SSDT BFF8E2C0, 013A (r1    AMI   CPU2PM        1 INTL 20060113)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000140000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 786304) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000140000000
>  NODE_DATA [000000000000e000 - 0000000000015fff]
>  bootmap [0000000000016000 -  000000000003dfff] pages 28
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-8b5bd7] TEXT DATA BSS
>early res: 3 [379d6000-37fefa9a] RAMDISK
>early res: 4 [9fc00-a0bff] EBDA
>early res: 5 [8000-dfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006600000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810006a00000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810006e00000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007200000 on node 0
> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007600000 on node 0
> [ffffe20004200000-ffffe200043fffff] PMD ->ffff810007a00000 on node 0
> [ffffe20004400000-ffffe200045fffff] PMD ->ffff810007e00000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1310720
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   786304
>    0:  1048576 ->  1310720
>On node 0 totalpages: 1048351
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1729 pages reserved
>  DMA zone: 2214 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 767928 pages, LIFO batch:31
>  Normal zone: 3584 pages used for memmap
>  Normal zone: 258560 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>PM: Registered nosave memory: 00000000bff80000 - 00000000bff8e000
>PM: Registered nosave memory: 00000000bff8e000 - 00000000bffe0000
>PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
>PM: Registered nosave memory: 00000000c0000000 - 00000000ffb00000
>PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
>Allocating PCI resources starting at c4000000 (gap: c0000000:3fb00000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 47936 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1028702
>Policy zone: Normal
>Kernel command line: root=/dev/md0 resume=/dev/sdc3 splash=silent vga=0x31a
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2938.343 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x8021000 - 0xc021000
>Memory: 4056420k/5242880k available (2365k kernel code, 136984k reserved, 1920k data, 404k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 5880.82 BogoMIPS (lpj=11761656)
>Security Framework initialized
>AppArmor: AppArmor initialized <NULL>
>AppArmor: Registered secondary security module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20070126
>ACPI: Checking initramfs for custom DSDT
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 983 Objects with 63 Devices 242 Methods 30 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 9 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0003) - 7 Objects with 0 Devices 4 Methods 0 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>APIC timer calibration result 16695154
>Detected 16.695 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5775.60 BogoMIPS (lpj=11551215)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU         X6800  @ 2.93GHz stepping 05
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>net_namespace: 1016 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 1 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:.....................................................................................................................................................................................................................................................
>Initialized 22/30 Regions 37/37 Fields 56/56 Buffers 130/132 Packages (1008 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:.
>Executed 1 _INI methods requiring 0 _STA executions (examined 69 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  7E, should be 75 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>AppArmor: AppArmor Filesystem Enabled 
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
>system 00:07: ioport range 0x290-0x297 has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x400-0x41f has been reserved
>system 00:08: ioport range 0x480-0x4bf has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
>system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0xc0000-0xdffff has been reserved
>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved
>system 00:0e: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: 0xfaa00000-0xfeafffff
>  PREFETCH window: 0x00000000cff00000-0x00000000efefffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: 0x00000000cfe00000-0x00000000cfefffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: b000-bfff
>  MEM window: 0xfa900000-0xfa9fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: a000-afff
>  MEM window: 0xfa800000-0xfa8fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: 9000-9fff
>  MEM window: 0xfa700000-0xfa7fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 0xf6600000-0xfa6fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>Unpacking initramfs...<7>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
> done
>Freeing initrd memory: 6246k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1215368066.596:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:06:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20001080000, using 10240k, total 262144k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 208945 bytes
>bootsplash: ...found (1280x1024, 220863 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input0
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>NET: Registered protocol family 1
>registered taskstats version 1
>Freeing unused kernel memory: 404k freed
>Write protecting the kernel read-only data: 1680k
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._OSC] (Node ffff81013fa68b30), AE_ALREADY_EXISTS
>ACPI: Marking method _OSC as Serialized
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff81013fa68b50), AE_ALREADY_EXISTS
>ACPI: Marking method _PDC as Serialized
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._OSC] (Node ffff81013fa68a10), AE_ALREADY_EXISTS
>ACPI: Marking method _OSC as Serialized
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff81013fa68a30), AE_ALREADY_EXISTS
>ACPI: Marking method _PDC as Serialized
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU2] (supports 8 throttling states)
>No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:02:00.1 to 64
>scsi0 : pata_jmicron
>scsi1 : pata_jmicron
>ata1: PATA max UDMA/100 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 18
>ata2: PATA max UDMA/100 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 18
>ata1.00: ATA-7: ST3250823A, 3.03, max UDMA/100
>ata1.00: 488397168 sectors, multi 0: LBA48 
>ata1.01: ATA-7: ST3250823A, 3.03, max UDMA/100
>ata1.01: 488397168 sectors, multi 0: LBA48 
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST3250823A       3.03 PQ: 0 ANSI: 5
>scsi 0:0:1:0: Direct-Access     ATA      ST3250823A       3.03 PQ: 0 ANSI: 5
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
>ahci 0000:00:1f.2: enabling ASUS P5W DH Deluxe on-board SIMG4726 workaround
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata3: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb900 irq 4346
>ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 4346
>ata5: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba00 irq 4346
>ata6: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba80 irq 4346
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: unsupported device, disabling
>ata4.00: disabled
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>scsi6 : ahci
>scsi7 : ahci
>ata7: SATA max UDMA/133 abar m8192@0xfa7fe000 port 0xfa7fe100 irq 17
>ata8: SATA max UDMA/133 abar m8192@0xfa7fe000 port 0xfa7fe180 irq 17
>ata7: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi8 : ata_piix
>scsi9 : ata_piix
>ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata9.00: ATA-5: IC35L060AVER07-0, ER6OA44A, max UDMA/100
>ata9.00: 120103200 sectors, multi 16: LBA 
>ata9.01: ATAPI: _NEC DVD_RW ND-3540A, 1.04, max UDMA/33
>ata9.00: configured for UDMA/100
>ata9.01: configured for UDMA/33
>scsi 8:0:0:0: Direct-Access     ATA      IC35L060AVER07-0 ER6O PQ: 0 ANSI: 5
>scsi 8:0:1:0: CD-ROM            _NEC     DVD_RW ND-3540A  1.04 PQ: 0 ANSI: 5
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
> sda:<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>USB Universal Host Controller Interface driver v3.0
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebfbc00
> sda1 sda2 <<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
> sda5<6>hub 1-0:1.0: 8 ports detected
> sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 <<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> sdb5<6>usb usb1: Product: EHCI Host Controller
> sdb6<6>usb usb1: Manufacturer: Linux 2.6.25.5-1.1-default ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
> sdb7<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
> sdb8<6>hub 2-0:1.0: 2 ports detected
> sdb9 >
>sd 0:0:1:0: [sdb] Attached SCSI disk
>sd 8:0:0:0: [sdc] 120103200 512-byte hardware sectors (61493 MB)
>sd 8:0:0:0: [sdc] Write Protect is off
>sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:0:0: [sdc] 120103200 512-byte hardware sectors (61493 MB)
>sd 8:0:0:0: [sdc] Write Protect is off
>sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 sdc3 sdc4
>sd 8:0:0:0: [sdc] Attached SCSI disk
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>usb 1-2: configuration #1 chosen from 1 choice
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 3 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00
>usb 1-2: New USB device found, idVendor=05ac, idProduct=912f
>usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb 1-7: new high speed USB device using ehci_hcd and address 3
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>xor: automatically using best checksumming function: generic_sse
>   generic_sse: 10750.000 MB/sec
>xor: using function: generic_sse (10750.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int64x1   2884 MB/s
>usb 1-7: configuration #1 chosen from 1 choice
>hub 1-7:1.0: USB hub found
>hub 1-7:1.0: 4 ports detected
>raid6: int64x2   3659 MB/s
>usb 1-7: New USB device found, idVendor=05e3, idProduct=0606
>usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>raid6: int64x4   2727 MB/s
>usb 1-7: Product: USB2.0 Hub
>raid6: int64x8   2524 MB/s
>raid6: sse2x1    4467 MB/s
>raid6: sse2x2    5493 MB/s
>raid6: sse2x4    8900 MB/s
>raid6: using algorithm sse2x4 (8900 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: md0 stopped.
>usb 1-2.2: new full speed USB device using ehci_hcd and address 4
>md: bind<sdb1>
>md: bind<sda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>PM: Starting manual resume from disk
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sd 8:0:0:0: Attached scsi generic sg2 type 0
>scsi 8:0:1:0: Attached scsi generic sg3 type 5
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>EDAC MC: Ver: 2.1.0 Jun  8 2008
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>sky2 0000:04:00.0: v1.21 addr 0xfa9fc000 irq 19 Yukon-EC (0xb6) rev 2
>sky2 eth0: addr 00:18:f3:58:1d:b3
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>sky2 0000:03:00.0: v1.21 addr 0xfa8fc000 irq 16 Yukon-EC (0xb6) rev 2
>sky2 eth1: addr 00:18:f3:58:19:02
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
>ACPI: Power Button (CM) [PWRB]
>EDAC i82975x: ECC disabled on both channels.
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 8:0:1:0: Attached scsi CD-ROM sr0
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  173.14.09  Wed Jun  4 23:40:50 PDT 2008
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[fa6ff800-fa6fffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 23
>ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
>ACPI: Device needs an ACPI driver
>intel_rng: FWH not detected
>Linux video capture interface: v2.00
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
>cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 23 (level, low) -> IRQ 23
>cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected]
>cx88[0]: TV tuner type 60, Radio tuner type -1
>cx88[0]: Test OK
>tuner' 1-0043: chip found @ 0x86 (cx88[0])
>tda9887 1-0043: tda988[5/6/7] found
>tuner' 1-0061: chip found @ 0xc2 (cx88[0])
>tuner-simple 1-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC))
>cx88[0]/0: found at 0000:01:02.0, rev: 5, irq: 23, latency: 32, mmio: 0xf8000000
>cx88[0]/0: registered device video0 [v4l2]
>cx88[0]/0: registered device vbi0
>cx88[0]/0: registered device radio0
>cx88[0]/2: cx2388x 8802 Driver Manager
>ACPI: PCI Interrupt 0000:01:02.2[A] -> GSI 23 (level, low) -> IRQ 23
>cx88[0]/2: found at 0000:01:02.2, rev: 5, irq: 23, latency: 32, mmio: 0xf9000000
>cx88/2: cx2388x dvb driver version 0.0.6 loaded
>cx88/2: registering cx8802 driver, type: dvb access: shared
>cx88[0]/2: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22]
>cx88[0]/2: cx2388x based DVB/ATSC card
>DVB: registering new adapter (cx88[0])
>DVB: registering frontend 0 (Oren OR51132 VSB/QAM Frontend)...
>Adding 4200988k swap on /dev/sdc3.  Priority:-1 extents:1 across:4200988k
>ieee1394: Host added: ID:BUS[0-01:1023]  GUID[0011d80000d81e66]
>md: md1 stopped.
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>md: bind<sdb5>
>md: bind<sda5>
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: md2 stopped.
>md: bind<sdb6>
>md: bind<sda6>
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: md3 stopped.
>md: bind<sdb7>
>md: bind<sda7>
>raid1: raid set md3 active with 2 out of 2 mirrors
>md: md4 stopped.
>md: bind<sdb8>
>md: bind<sda8>
>raid1: raid set md4 active with 2 out of 2 mirrors
>md: md5 stopped.
>md: bind<sdb9>
>md: bind<sda9>
>raid1: raid set md5 active with 2 out of 2 mirrors
>usb 1-2.2: configuration #1 chosen from 1 choice
>usb 1-2.2: New USB device found, idVendor=05ac, idProduct=9221
>usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2.2: Product: Apple Cinema HD Display
>usb 1-2.2: Manufacturer: Apple Computer, Inc.
>usb 1-2.3: new low speed USB device using ehci_hcd and address 5
>usb 1-2.3: configuration #1 chosen from 1 choice
>usb 1-2.3: New USB device found, idVendor=046d, idProduct=c50e
>usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2.3: Product: USB Receiver
>usb 1-2.3: Manufacturer: Logitech
>usb 1-7.3: new high speed USB device using ehci_hcd and address 6
>usb 1-7.3: configuration #1 chosen from 1 choice
>usb 1-7.3: New USB device found, idVendor=0bda, idProduct=8187
>usb 1-7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-7.3: Product: RTL8187_Wireless
>usb 1-7.3: Manufacturer: Manufacturer_Realtek_RTL8187_
>usb 1-7.3: SerialNumber: 0015AF07D859
>usbcore: registered new interface driver hiddev
>hiddev96hidraw0: USB HID v1.11 Device [Apple Computer, Inc. Apple Cinema HD Display] on usb-0000:00:1d.7-2.2
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.3/1-2.3:1.0/input/input4
>input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-2.3
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>phy0: Selected rate control algorithm 'pid'
>phy0: hwaddr 00:15:af:07:d8:59, rtl8187 V1 + rtl8225z2
>usbcore: registered new interface driver rtl8187
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>Filesystem "md5": Disabling barriers, not supported by the underlying device
>XFS mounting filesystem md5
>Ending clean XFS mount for filesystem: md5
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>type=1505 audit(1215368092.451:2): operation="profile_load" name="/bin/ping" name2="default" pid=1902
>type=1505 audit(1215368092.675:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1918
>type=1505 audit(1215368092.791:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1920
>type=1505 audit(1215368092.847:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1924
>type=1505 audit(1215368092.911:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1928
>type=1505 audit(1215368092.939:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1936
>type=1505 audit(1215368093.131:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1937
>type=1505 audit(1215368093.183:9): operation="profile_load" name="/usr/sbin/named" name2="default" pid=1947
>type=1505 audit(1215368093.439:10): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1948
>type=1505 audit(1215368093.600:11): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1949
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>sky2 eth0: enabling interface
>sky2 eth1: enabling interface
>sky2 eth1: Link is up at 100 Mbps, full duplex, flow control both
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>NET: Registered protocol family 17
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003

Actions: View

Attachments on bug 406638: 226152 | 226153 | 226154 | 226155 | 226156