Attachment 239062 Details for Bug 425480

dmesg of 11.0 installation

dmesg (text/plain), 35.84 KB, created by Stephan Binner on 2008-09-11 13:07:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stephan Binner

Created: 2008-09-11 13:07:04 UTC

Size: 35.84 KB

patch

obsolete

>Linux version 2.6.25.5-1.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-06-07 01:55:22 +0200
>Command line: root=/dev/sda7 resume=/dev/sda3 splash=silent showopts vga=0x31a
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000100 - 000000000009e800 (usable)
> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007c548000 (usable)
> BIOS-e820: 000000007c548000 - 000000007c5b1000 (ACPI NVS)
> BIOS-e820: 000000007c5b1000 - 000000007d1ca000 (usable)
> BIOS-e820: 000000007d1ca000 - 000000007d1cc000 (reserved)
> BIOS-e820: 000000007d1cc000 - 000000007d277000 (usable)
> BIOS-e820: 000000007d277000 - 000000007d2ce000 (ACPI NVS)
> BIOS-e820: 000000007d2ce000 - 000000007d2de000 (usable)
> BIOS-e820: 000000007d2de000 - 000000007d2e5000 (ACPI NVS)
> BIOS-e820: 000000007d2e5000 - 000000007d2e9000 (usable)
> BIOS-e820: 000000007d2e9000 - 000000007d2f3000 (ACPI data)
> BIOS-e820: 000000007d2f3000 - 000000007d2f4000 (usable)
> BIOS-e820: 000000007d2f4000 - 000000007d2ff000 (ACPI data)
> BIOS-e820: 000000007d2ff000 - 000000007d300000 (usable)
> BIOS-e820: 000000007d300000 - 000000007e000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 1, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 509256) 1 entries of 3200 used
>Entering add_active_range(0, 509361, 512458) 2 entries of 3200 used
>Entering add_active_range(0, 512460, 512631) 3 entries of 3200 used
>Entering add_active_range(0, 512718, 512734) 4 entries of 3200 used
>Entering add_active_range(0, 512741, 512745) 5 entries of 3200 used
>Entering add_active_range(0, 512755, 512756) 6 entries of 3200 used
>Entering add_active_range(0, 512767, 512768) 7 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000FE020, 0014 (r0 INTEL )
>ACPI: RSDT 7D2FD038, 0064 (r1 INTEL  DQ3510J       2E9       1000013)
>ACPI: FACP 7D2FC000, 0074 (r1 INTEL  DQ3510J       2E9 MSFT  1000013)
>ACPI: DSDT 7D2F8000, 3C65 (r1 INTEL  DQ3510J       2E9 MSFT  1000013)
>ACPI: FACS 7D283000, 0040
>ACPI: APIC 7D2F7000, 0078 (r1 INTEL  DQ3510J       2E9 MSFT  1000013)
>ACPI: WDDT 7D2F6000, 0040 (r1 INTEL  DQ3510J       2E9 MSFT  1000013)
>ACPI: MCFG 7D2F5000, 003C (r1 INTEL  DQ3510J       2E9 MSFT  1000013)
>ACPI: ASF! 7D2F4000, 00A6 (r32 INTEL  DQ3510J       2E9 MSFT  1000013)
>ACPI: ASPT 7D2F2000, 002C (r1 INTEL  DQ3510J       2E9 MSFT  1000013)
>ACPI: SSDT 7D2F1000, 0204 (r1 INTEL     CpuPm      2E9 MSFT  1000013)
>ACPI: SSDT 7D2F0000, 0175 (r1 INTEL   Cpu0Ist      2E9 MSFT  1000013)
>ACPI: SSDT 7D2EF000, 0175 (r1 INTEL   Cpu1Ist      2E9 MSFT  1000013)
>ACPI: SSDT 7D2EE000, 0175 (r1 INTEL   Cpu2Ist      2E9 MSFT  1000013)
>ACPI: SSDT 7D2ED000, 0175 (r1 INTEL   Cpu3Ist      2E9 MSFT  1000013)
>ACPI: SSDT 7D2EC000, 00DD (r1 INTEL   Cpu0Cst      2E9 MSFT  1000013)
>ACPI: SSDT 7D2EB000, 00DD (r1 INTEL   Cpu1Cst      2E9 MSFT  1000013)
>ACPI: SSDT 7D2EA000, 00DD (r1 INTEL   Cpu2Cst      2E9 MSFT  1000013)
>ACPI: SSDT 7D2E9000, 00DD (r1 INTEL   Cpu3Cst      2E9 MSFT  1000013)
>ACPI: TCPA 7D277000, 0032 (r2 INTEL  TIANO           2 MSFT  1000013)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007d300000
>Entering add_active_range(0, 1, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 509256) 1 entries of 3200 used
>Entering add_active_range(0, 509361, 512458) 2 entries of 3200 used
>Entering add_active_range(0, 512460, 512631) 3 entries of 3200 used
>Entering add_active_range(0, 512718, 512734) 4 entries of 3200 used
>Entering add_active_range(0, 512741, 512745) 5 entries of 3200 used
>Entering add_active_range(0, 512755, 512756) 6 entries of 3200 used
>Entering add_active_range(0, 512767, 512768) 7 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007d300000
>  NODE_DATA [000000000000c000 - 0000000000013fff]
>  bootmap [0000000000014000 -  0000000000023a5f] pages 10
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-8b5bd7] TEXT DATA BSS
>early res: 3 [7cc33000-7d1c9d78] RAMDISK
>early res: 4 [9e800-a07ff] EBDA
>early res: 5 [8000-bfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
>Zone PFN ranges:
>  DMA             1 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[8] active PFN ranges
>    0:        1 ->      158
>    0:      256 ->   509256
>    0:   509361 ->   512458
>    0:   512460 ->   512631
>    0:   512718 ->   512734
>    0:   512741 ->   512745
>    0:   512755 ->   512756
>    0:   512767 ->   512768
>On node 0 totalpages: 512447
>  DMA zone: 55 pages used for memmap
>  DMA zone: 1728 pages reserved
>  DMA zone: 2214 pages, LIFO batch:0
>  DMA32 zone: 6954 pages used for memmap
>  DMA32 zone: 501496 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 000000007c548000 - 000000007c5b1000
>PM: Registered nosave memory: 000000007d1ca000 - 000000007d1cc000
>PM: Registered nosave memory: 000000007d277000 - 000000007d2ce000
>PM: Registered nosave memory: 000000007d2de000 - 000000007d2e5000
>PM: Registered nosave memory: 000000007d2e9000 - 000000007d2f3000
>PM: Registered nosave memory: 000000007d2f4000 - 000000007d2ff000
>Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 47936 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 503710
>Policy zone: DMA32
>Kernel command line: root=/dev/sda7 resume=/dev/sda3 splash=silent showopts vga=0x31a
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2325.155 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2008096k/2051072k available (2365k kernel code, 41692k reserved, 1920k data, 404k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>Calibrating delay using timer specific routine.. 4654.00 BogoMIPS (lpj=9308014)
>Security Framework initialized
>AppArmor: AppArmor initialized <NULL>
>AppArmor: Registered secondary security module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal LVT vector (0xfa) already installed
>using mwait in idle threads.
>ACPI: Core revision 20070126
>ACPI: Checking initramfs for custom DSDT
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 610 Objects with 63 Devices 156 Methods 42 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 10 Objects with 0 Devices 4 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0003) - 5 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0004) - 5 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0005) - 5 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0006) - 5 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0007) - 1 Objects with 0 Devices 1 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0008) - 1 Objects with 0 Devices 1 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0009) - 1 Objects with 0 Devices 1 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 000A) - 1 Objects with 0 Devices 1 Methods 0 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0079 [00] enable                : System is already in ACPI mode
>Using local APIC timer interrupts.
>APIC timer calibration result 20760338
>Detected 20.760 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4650.37 BogoMIPS (lpj=9300744)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>net_namespace: 1016 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at f0000000 - f7ffffff
>PCI: Using configuration type 1
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 3F [_GPE] 8 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 5 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:............................................................................
>Initialized 36/42 Regions 0/0 Fields 25/25 Buffers 15/35 Packages (653 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:.
>Executed 1 _INI methods requiring 0 _STA executions (examined 69 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-GART: No AMD northbridge found.
>AppArmor: AppArmor Filesystem Enabled 
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xf0000000-0xf7ffffff could not be reserved
>system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved
>system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
>system 00:01: iomem range 0xc0000-0xdffff has been reserved
>system 00:01: iomem range 0xe0000-0xfffff could not be reserved
>system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
>system 00:06: ioport range 0x500-0x53f has been reserved
>system 00:06: ioport range 0x400-0x47f has been reserved
>system 00:06: ioport range 0x680-0x6ff has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: 1000-1fff
>  MEM window: 0x90000000-0x900fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>Unpacking initramfs... done
>Freeing initrd memory: 5723k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1221143918.632:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>vesafb: framebuffer at 0x80000000, mapped to 0xffffc20008980000, using 8128k, total 8128k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=2032
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 208945 bytes
>bootsplash: ...found (1280x1024, 220863 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>NET: Registered protocol family 1
>registered taskstats version 1
>Freeing unused kernel memory: 404k freed
>Write protecting the kernel read-only data: 1680k
>Monitor-Mwait will be used to enter C-1 state
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>scsi0 : pata_marvell
>scsi1 : pata_marvell
>ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18
>ata2: DUMMY
>BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>Marking TSC unstable due to TSC halts in idle
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 21
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>scsi6 : ahci
>scsi7 : ahci
>ata3: SATA max UDMA/133 abar m2048@0x902a5000 port 0x902a5100 irq 4346
>ata4: SATA max UDMA/133 abar m2048@0x902a5000 port 0x902a5180 irq 4346
>ata5: SATA max UDMA/133 abar m2048@0x902a5000 port 0x902a5200 irq 4346
>ata6: SATA max UDMA/133 abar m2048@0x902a5000 port 0x902a5280 irq 4346
>ata7: SATA max UDMA/133 abar m2048@0x902a5000 port 0x902a5300 irq 4346
>ata8: SATA max UDMA/133 abar m2048@0x902a5000 port 0x902a5380 irq 4346
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-6: WDC WD2500JD-00HBB0, 08.02D08, max UDMA/133
>ata3.00: 488397168 sectors, multi 0: LBA48 
>ata3.00: configured for UDMA/133
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ata7: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata8.00: ATAPI: Optiarc DVD RW AD-7203S, 1.01, max UDMA/100
>ata8.00: configured for UDMA/100
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500JD-00H 08.0 PQ: 0 ANSI: 5
>scsi 7:0:0:0: CD-ROM            Optiarc  DVD RW AD-7203S  1.01 PQ: 0 ANSI: 5
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 18, io base 0x000020e0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Driver 'sd' needs updating - please use bus_type methods
>sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3 sda4
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020c0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>sd 2:0:0:0: [sda] Attached SCSI disk
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.2 to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.2: irq 17, io base 0x000020a0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 17, io mem 0x902a5c00
>usb 5-2: new low speed USB device using uhci_hcd and address 2
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25.5-1.1-default ehci_hcd
>usb usb7: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
>usb 5-2: configuration #1 chosen from 1 choice
>usb 5-2: New USB device found, idVendor=046a, idProduct=0023
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x902a5800
>usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 6 ports detected
>usb 5-2: USB disconnect, address 2
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: EHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.25.5-1.1-default ehci_hcd
>usb usb8: SerialNumber: 0000:00:1d.7
>hub 8-0:1.0: unable to enumerate USB device on port 4
>hub 8-0:1.0: unable to enumerate USB device on port 6
>usbcore: registered new interface driver hiddev
>usb 5-2: new low speed USB device using uhci_hcd and address 3
>usb 5-2: configuration #1 chosen from 1 choice
>usb 5-2: New USB device found, idVendor=046a, idProduct=0023
>usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.1/usb5/5-2/5-2:1.0/input/input1
>input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.1-2
>input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.1/usb5/5-2/5-2:1.1/input/input2
>input,hidraw1: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.1-2
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>usb 6-2: new low speed USB device using uhci_hcd and address 2
>PM: Starting manual resume from disk
>usb 6-2: configuration #1 chosen from 1 choice
>input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb6/6-2/6-2:1.0/input/input3
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2
>usb 6-2: New USB device found, idVendor=046d, idProduct=c018
>usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 6-2: Product: USB Optical Mouse
>usb 6-2: Manufacturer: Logitech
>e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
>e1000e: Copyright (c) 1999-2007 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>0000:00:19.0: The NVM Checksum Is Not Valid
>ACPI: PCI interrupt for device 0000:00:19.0 disabled
>e1000e: probe of 0000:00:19.0 failed with error -5
>agpgart: Detected an Intel Q35 Chipset.
>agpgart: Detected 7164K stolen memory.
>agpgart: AGP aperture is 256M @ 0x80000000
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>scsi 7:0:0:0: Attached scsi generic sg1 type 5
>ACPI: Sleep Button (CM) [SLPB]
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 7:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 18
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3025:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3029:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3030:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:3038:    inputs: mic=0x18, fmic=0x1a, line=0x19, fline=0x0, cd=0x0, aux=0x0
>Adding 1036184k swap on /dev/sda3.  Priority:-1 extents:1 across:1036184k
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>loop: module loaded
>fuse init (API version 7.9)
>type=1505 audit(1221143933.887:2): operation="profile_load" name="/bin/ping" name2="default" pid=1436
>type=1505 audit(1221143933.919:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1466
>type=1505 audit(1221143934.007:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1475
>type=1505 audit(1221143934.027:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1518
>type=1505 audit(1221143934.131:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1528
>type=1505 audit(1221143934.212:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1543
>type=1505 audit(1221143934.256:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1555
>type=1505 audit(1221143934.355:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1561
>type=1505 audit(1221143934.527:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1569
>type=1505 audit(1221143934.555:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1584
>bootsplash: status on console 0 changed to on
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip_tables: (C) 2000-2006 Netfilter Core Team
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>set status page addr 0x00043000
>ppdev: user-space parallel port driver
>lp: driver loaded but no devices found
>lp: driver loaded but no devices found
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3025:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3029:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3030:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:3038:    inputs: mic=0x18, fmic=0x1a, line=0x19, fline=0x0, cd=0x0, aux=0x0
>Uniform Multi-Platform E-IDE driver
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>st: Version 20080221, fixed bufsize 32768, s/g segs 256
>Driver 'st' needs updating - please use bus_type methods
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>set status page addr 0x00043000
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
>e1000e: Copyright (c) 1999-2007 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>0000:00:19.0: The NVM Checksum Is Not Valid
>ACPI: PCI interrupt for device 0000:00:19.0 disabled
>e1000e: probe of 0000:00:19.0 failed with error -5
>usb 7-4: new high speed USB device using ehci_hcd and address 2
>usb 7-4: configuration #1 chosen from 1 choice
>usb 7-4: New USB device found, idVendor=1307, idProduct=0165
>usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 7-4: Product: USB Mass Storage Device
>usb 7-4: Manufacturer: USBest Technology
>usb 7-4: SerialNumber: 08041055b4a174
>Initializing USB Mass Storage driver...
>scsi8 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>scsi 8:0:0:0: Direct-Access     Ut165    USB2FlashStorage 0.00 PQ: 0 ANSI: 2
>sd 8:0:0:0: [sdb] 7897088 512-byte hardware sectors (4043 MB)
>sd 8:0:0:0: [sdb] Write Protect is off
>sd 8:0:0:0: [sdb] Mode Sense: 00 00 00 00
>sd 8:0:0:0: [sdb] Assuming drive cache: write through
>sd 8:0:0:0: [sdb] 7897088 512-byte hardware sectors (4043 MB)
>sd 8:0:0:0: [sdb] Write Protect is off
>sd 8:0:0:0: [sdb] Mode Sense: 00 00 00 00
>sd 8:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 8:0:0:0: [sdb] Attached SCSI removable disk
>sd 8:0:0:0: Attached scsi generic sg2 type 0
>usb-storage: device scan complete
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.

Actions: View

Attachments on bug 425480: 239061 | 239062 | 241194 | 241376 | 242026 | 242027 | 242732 | 242733 | 242921 | 242983