Attachment 253477 Details for Bug 446607

dmesg

dmesg.txt (text/plain), 71.45 KB, created by Zsolt Sági on 2008-11-19 15:05:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Zsolt Sági

Created: 2008-11-19 15:05:02 UTC

Size: 71.45 KB

patch

obsolete

>milleniumfalcon:~ # dmesg
>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27.5-2-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-11-11 15:15:33 +0100
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bf7d0000 (usable)
> BIOS-e820: 00000000bf7d0000 - 00000000bf7e5600 (reserved)
> BIOS-e820: 00000000bf7e5600 - 00000000bf7f8000 (ACPI NVS)
> BIOS-e820: 00000000bf7f8000 - 00000000bf800000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>last_pfn = 0xbf7d0 max_arch_pfn = 0x1000000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>kernel direct mapping tables up to 38000000 @ 7000-c000
>NX (Execute Disable) protection: active
>RAMDISK: 37a58000 - 37fef21e
>DMI 2.4 present.
>ACPI: RSDP 000F7C30, 0024 (r2 HP    )
>ACPI: XSDT BF7E57C4, 0074 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: FACP BF7E5684, 00F4 (r4 HP     30AA            3 HP          1)
>ACPI: DSDT BF7E5AC0, FBEB (r1 HP       nc6340    10000 MSFT  100000E)
>ACPI: FACS BF7F7E80, 0040
>ACPI: SLIC BF7E5838, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: HPET BF7E59B0, 0038 (r1 HP     30AA            1 HP          1)
>ACPI: APIC BF7E59E8, 0068 (r1 HP     30AA            1 HP          1)
>ACPI: MCFG BF7E5A50, 003C (r1 HP     30AA            1 HP          1)
>ACPI: TCPA BF7E5A8C, 0032 (r2 HP     30AA            1 HP          1)
>ACPI: SSDT BF7F56AB, 0326 (r1 HP       HPQSAT        1 MSFT  100000E)
>ACPI: SSDT BF7F6226, 025F (r1 HP      Cpu0Tst     3000 INTL 20050624)
>ACPI: SSDT BF7F6485, 00A6 (r1 HP      Cpu1Tst     3000 INTL 20050624)
>ACPI: SSDT BF7F652B, 04D7 (r1 HP        CpuPm     3000 INTL 20050624)
>ACPI: DMI detected: Hewlett-Packard
>NUMA - single node, flat memory mode
>Node: 0, start_pfn: 0, end_pfn: bf7d0
>  Setting physnode_map array to node 0 for pfns:
>  0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 80000 84000 88000 8c000 90000 94000 98000 9c000 a0000 a4000 a8000 ac000 b0000 b4000 b8000 bc000
>node 0 pfn: [0 - bf7d0]
>Reserving 7168 pages of KVA for lmem_map of node 0 at bda00
>remove_active_range (0, 776704, 783872)
>Reserving total of 1c00 pages for numa KVA remap
>kva_start_pfn ~ 35e00 max_low_pfn ~ 38000
>max_pfn = bf7d0
>2167MB HIGHMEM available.
>896MB LOWMEM available.
>max_low_pfn = 38000, highstart_pfn = 38000
>Low memory ends at vaddr f8000000
>node 0 will remap to vaddr f5e00000 - f7a00000
>allocate_pgdat: node 0 NODE_DATA f5e00000
>remap_numa_kva: node 0
>remap_numa_kva: f5e00000 to pfn 000bda00
>remap_numa_kva: f6000000 to pfn 000bdc00
>remap_numa_kva: f6200000 to pfn 000bde00
>remap_numa_kva: f6400000 to pfn 000be000
>remap_numa_kva: f6600000 to pfn 000be200
>remap_numa_kva: f6800000 to pfn 000be400
>remap_numa_kva: f6a00000 to pfn 000be600
>remap_numa_kva: f6c00000 to pfn 000be800
>remap_numa_kva: f6e00000 to pfn 000bea00
>remap_numa_kva: f7000000 to pfn 000bec00
>remap_numa_kva: f7200000 to pfn 000bee00
>remap_numa_kva: f7400000 to pfn 000bf000
>remap_numa_kva: f7600000 to pfn 000bf200
>remap_numa_kva: f7800000 to pfn 000bf400
>High memory starts at vaddr f8000000
>  mapped low ram: 0 - 38000000
>  low ram: 00000000 - 38000000
>  bootmap 0000b000 - 00012000
>(11 early reservations) ==> bootmem [0000000000 - 0038000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000100000 - 000067651c]    TEXT DATA BSS ==> [0000100000 - 000067651c]
>  #4 [0037a58000 - 0037fef21e]          RAMDISK ==> [0037a58000 - 0037fef21e]
>  #5 [0000677000 - 000067f000]    INIT_PG_TABLE ==> [0000677000 - 000067f000]
>  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #7 [0000007000 - 000000b000]          PGTABLE ==> [0000007000 - 000000b000]
>  #8 [00bda00000 - 00bf600000]          KVA RAM
>  #9 [0035e00000 - 0037a00000]           KVA PG ==> [0035e00000 - 0037a00000]
>  #10 [000000b000 - 0000012000]          BOOTMAP ==> [000000b000 - 0000012000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x00038000
>  HighMem  0x00038000 -> 0x000bf7d0
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x000bda00
>    0: 0x000bf600 -> 0x000bf7d0
>On node 0 totalpages: 777071
>free_area_init_node: node 0, pgdat f5e00000, node_mem_map f5e02000
>  DMA zone: 3963 pages, LIFO batch:0
>  Normal zone: 223300 pages, LIFO batch:31
>  HighMem zone: 542914 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at c0000000 (gap: bf800000:3f400000)
>PERCPU: Allocating 40092 bytes of per cpu data
>NR_CPUS: 128, nr_cpu_ids: 2, nr_node_ids 8
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 770177
>Policy zone: HighMem
>Kernel command line: root=/dev/disk/by-id/ata-HTS541010G9SA00_MP2ZX0XLG71D3S-part1 resume=/dev/disk/by-id/ata-HTS541010G9SA00_MP2ZX0XLG71D3S-part2 splash=silent vga=0x31a console=ttyS0,9600n8
>bootsplash: silent mode.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Extended CMOS year: 2000
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PMTIMER calibration value
>Detected 1994.992 MHz processor.
>Console: colour dummy device 80x25
>console [ttyS0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Initializing HighMem for node 0 (00038000:000bf7d0)
>Memory: 3067276k/3137344k available (2427k kernel code, 41004k reserved, 1969k data, 328k init, 2191168k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xff8b6000 - 0xfffff000   (7460 kB)
>    pkmap   : 0xff400000 - 0xff600000   (2048 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0552000 - 0xc05a4000   ( 328 kB)
>      .data : 0xc035ec3b - 0xc054b1f8   (1969 kB)
>      .text : 0xc0100000 - 0xc035ec3b   (2427 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.98 BogoMIPS (lpj=7979968)
>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
>Security Framework initialized
>SELinux:  Disabled at boot.
>AppArmor: AppArmor initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20080609
>ACPI: Checking initramfs for custom DSDT
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 1226 Objects with 108 Devices 368 Methods 46 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 17 Objects with 4 Devices 5 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0005) - 14 Objects with 0 Devices 5 Methods 0 Regions
> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Mapping cpu 0 to node 0
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Mapping cpu 1 to node 0
>Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=7980069)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (7980.01 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>net_namespace: 1044 bytes
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
>PCI: Using configuration type 1 for base access
>perfmon: version 2.82
>perfmon: CPU hotplug support enabled
>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>ACPI: EC: Look up EC in DSDT
>: ACPI: EC: non-query interrupt received, switching to interrupt mode
>Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................................
>Initialized 39/46 Regions 0/0 Fields 65/66 Buffers 72/73 Packages (1277 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:.......
>Executed 7 _INI methods requiring 3 _STA executions (examined 121 objects)
>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 5 Runtime GPEs in this block
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>: ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>: ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [C002] (0000:00)
>PCI: 0000:00:02.0 reg 10 32bit mmio: [e8400000, e847ffff]
>PCI: 0000:00:02.0 reg 14 io port: [6000, 6007]
>PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
>PCI: 0000:00:02.0 reg 1c 32bit mmio: [e8480000, e84bffff]
>PCI: 0000:00:02.1 reg 10 32bit mmio: [e8500000, e857ffff]
>PCI: 0000:00:1b.0 reg 10 64bit mmio: [e8580000, e8583fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>PCI: 0000:00:1d.0 reg 20 io port: [6020, 603f]
>PCI: 0000:00:1d.1 reg 20 io port: [6040, 605f]
>PCI: 0000:00:1d.2 reg 20 io port: [6060, 607f]
>PCI: 0000:00:1d.3 reg 20 io port: [6080, 609f]
>PCI: 0000:00:1d.7 reg 10 32bit mmio: [e8584000, e85843ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
>PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
>PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
>PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
>PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
>PCI: 0000:00:1f.1 reg 20 io port: [60a0, 60af]
>PCI: 0000:00:1f.2 reg 10 io port: [13f0, 13f7]
>PCI: 0000:00:1f.2 reg 14 io port: [15f4, 15f7]
>PCI: 0000:00:1f.2 reg 18 io port: [1370, 1377]
>PCI: 0000:00:1f.2 reg 1c io port: [1574, 1577]
>PCI: 0000:00:1f.2 reg 20 io port: [60d0, 60df]
>PCI: 0000:00:1f.2 reg 24 32bit mmio: [e8585000, e85853ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>PCI: 0000:08:00.0 reg 10 32bit mmio: [e8000000, e8000fff]
>pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:08:00.0: PME# disabled
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:1c.0 32bit mmio: [e8000000, e80fffff]
>PCI: bridge 0000:00:1c.2 io port: [4000, 5fff]
>PCI: bridge 0000:00:1c.2 32bit mmio: [e4000000, e7ffffff]
>PCI: bridge 0000:00:1c.3 io port: [2000, 3fff]
>PCI: bridge 0000:00:1c.3 32bit mmio: [e0000000, e3ffffff]
>PCI: 0000:02:06.0 reg 10 32bit mmio: [e8100000, e8100fff]
>pci 0000:02:06.0: supports D1
>pci 0000:02:06.0: supports D2
>pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.0: PME# disabled
>PCI: 0000:02:06.1 reg 10 32bit mmio: [e8101000, e81017ff]
>PCI: 0000:02:06.1 reg 14 32bit mmio: [e8104000, e8107fff]
>pci 0000:02:06.1: supports D1
>pci 0000:02:06.1: supports D2
>pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.1: PME# disabled
>PCI: 0000:02:06.2 reg 10 32bit mmio: [e8108000, e8108fff]
>pci 0000:02:06.2: supports D1
>pci 0000:02:06.2: supports D2
>pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.2: PME# disabled
>PCI: 0000:02:06.3 reg 10 32bit mmio: [e8109000, e81090ff]
>pci 0000:02:06.3: supports D1
>pci 0000:02:06.3: supports D2
>pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.3: PME# disabled
>PCI: 0000:02:06.4 reg 10 32bit mmio: [e810a000, e810afff]
>PCI: 0000:02:06.4 reg 14 32bit mmio: [e810b000, e810bfff]
>pci 0000:02:06.4: supports D1
>pci 0000:02:06.4: supports D2
>pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.4: PME# disabled
>PCI: 0000:02:0e.0 reg 10 32bit mmio: [e8110000, e811ffff]
>pci 0000:02:0e.0: PME# supported from D3hot D3cold
>pci 0000:02:0e.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>PCI: bridge 0000:00:1e.0 32bit mmio: [e8100000, e83fffff]
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C096._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C102._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C115._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C118._PRT]
>ACPI: PCI Interrupt Link [C10E] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C110] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C111] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12A] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12B] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
>ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20080609]
>ACPI: Power Resource [C1F0] (on)
>ACPI: Power Resource [C1FD] (on)
>ACPI: Power Resource [C21A] (on)
>ACPI: Power Resource [C222] (off)
>ACPI: Power Resource [C321] (off)
>ACPI: Power Resource [C322] (off)
>ACPI: Power Resource [C323] (off)
>ACPI: Power Resource [C324] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>AppArmor: AppArmor Filesystem Enabled
>Switched to high resolution mode on CPU 0
>ACPI: RTC can wake from S4
>Switched to high resolution mode on CPU 1
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0xbf7fffff could not be reserved
>system 00:0c: ioport range 0x500-0x55f has been reserved
>system 00:0c: ioport range 0x800-0x80f has been reserved
>system 00:0c: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0d: ioport range 0x1000-0x107f has been reserved
>system 00:0d: ioport range 0x1100-0x113f has been reserved
>system 00:0d: ioport range 0x1200-0x121f has been reserved
>system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
>system 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved
>system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved
>system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved
>system 00:0d: iomem range 0xfed90000-0xfed9afff could not be reserved
>system 00:0e: iomem range 0xfeda0000-0xfedbffff could not be reserved
>system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: 0xe8000000-0xe80fffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:18
>pci 0000:00:1c.2:   IO window: 0x4000-0x5fff
>pci 0000:00:1c.2:   MEM window: 0xe4000000-0xe7ffffff
>pci 0000:00:1c.2:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:20
>pci 0000:00:1c.3:   IO window: 0x2000-0x3fff
>pci 0000:00:1c.3:   MEM window: 0xe0000000-0xe3ffffff
>pci 0000:00:1c.3:   PREFETCH window: disabled
>pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
>pci 0000:02:06.0:   IO window: 0x007000-0x0070ff
>pci 0000:02:06.0:   IO window: 0x007400-0x0074ff
>pci 0000:02:06.0:   PREFETCH window: 0xc0000000-0xc3ffffff
>pci 0000:02:06.0:   MEM window: 0xc4000000-0xc7ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1e.0:   IO window: 0x7000-0x7fff
>pci 0000:00:1e.0:   MEM window: 0xe8100000-0xe83fffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000c0000000-0x000000c3ffffff
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>vendor=8086 device=2448
>pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 08 index 0 mmio: [0, 0]
>bus: 08 index 1 mmio: [e8000000, e80fffff]
>bus: 08 index 2 mmio: [0, 0]
>bus: 08 index 3 mmio: [0, 0]
>bus: 18 index 0 io port: [4000, 5fff]
>bus: 18 index 1 mmio: [e4000000, e7ffffff]
>bus: 18 index 2 mmio: [0, 0]
>bus: 18 index 3 mmio: [0, 0]
>bus: 20 index 0 io port: [2000, 3fff]
>bus: 20 index 1 mmio: [e0000000, e3ffffff]
>bus: 20 index 2 mmio: [0, 0]
>bus: 20 index 3 mmio: [0, 0]
>bus: 02 index 0 io port: [7000, 7fff]
>bus: 02 index 1 mmio: [e8100000, e83fffff]
>bus: 02 index 2 mmio: [c0000000, c3ffffff]
>bus: 02 index 3 io port: [0, ffff]
>bus: 02 index 4 mmio: [0, ffffffffffffffff]
>bus: 03 index 0 io port: [7000, 70ff]
>bus: 03 index 1 io port: [7400, 74ff]
>bus: 03 index 2 mmio: [c0000000, c3ffffff]
>bus: 03 index 3 mmio: [c4000000, c7ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Unpacking initramfs... done
>Freeing initrd memory: 5724k freed
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1227100594.288:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 430
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>perfmon: added sampling format default
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: found MSI capability
>pci_express 0000:00:1c.2:pcie00: allocate port service
>pci_express 0000:00:1c.2:pcie02: allocate port service
>pci_express 0000:00:1c.2:pcie03: allocate port service
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pcieport-driver 0000:00:1c.3: found MSI capability
>pci_express 0000:00:1c.3:pcie00: allocate port service
>pci_express 0000:00:1c.3:pcie02: allocate port service
>pci_express 0000:00:1c.3:pcie03: allocate port service
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 7872k, total 7872k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=2
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 113709 bytes
>bootsplash: ...found (1280x1024, 43709 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Serial: 8250/16550 driver8 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PNP: PS/2 Controller [PNP0303:C217,PNP0f13:C218] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 328k freed
>Write protecting the kernel text: 2428k
>Write protecting the kernel read-only data: 1788k
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
>ACPI: SSDT BF7F5A99, 023D (r1 HP      Cpu0Ist     3000 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 0040) - 6 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: SSDT BF7F5D5B, 04CB (r1 HP      Cpu0Cst     3001 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 0041) - 1 Objects with 0 Devices 1 Methods 0 Regions
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>processor ACPI0007:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT BF7F59D1, 00C8 (r1 HP      Cpu1Ist     3000 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 0057) - 4 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: SSDT BF7F5CD6, 0085 (r1 HP      Cpu1Cst     3000 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 0058) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: CPU1 (power states: C1[C1]Marking TSC unstable due to TSC halts in idle
> C2[C2])
>processor ACPI0007:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZ0] (70 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [TZ1] (71 C)
>thermal LNXTHERM:03: registered as thermal_zone2
>ACPI: Thermal Zone [TZ2] (54 C)
>thermal LNXTHERM:04: registered as thermal_zone3
>ACPI: Thermal Zone [TZ3] (29 C)
>thermal LNXTHERM:05: registered as thermal_zone4
>ACPI: Thermal Zone [TZ4] (26 C)
>Uniform Multi-Platform E-IDE driver
>piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01)
>PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>piix 0000:00:1f.1: IDE port disabled
>piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x60a0-0x60a7
>Probing IDE interface ide0...
>hda: TSSTcorpCD/DVDW TS-L632D, ATAPI CD/DVD-ROM drive
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: MWDMA2 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ACPI: No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xe8585000 port 0xe8585100 irq 220
>ata2: DUMMY
>ata3: DUMMY
>ata4: DUMMY
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: ATA-7: HTS541010G9SA00, MBZOC60P, max UDMA/100
>ata1.00: 195371568 sectors, multi 16: LBA48
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>scsi 0:0:0:0: Direct-Access     ATA      HTS541010G9SA00  MBZO PQ: 0 ANSI: 5
>ACPI: Transitioning device [C325] to D3
>fan PNP0C0B:00: registered as cooling_device2
>ACPI: Fan [C325] (off)
>fan PNP0C0B:01: registered as cooling_device3
>ACPI: Fan [C326] (on)
>fan PNP0C0B:02: registered as cooling_device4
>ACPI: Fan [C327] (on)
>fan PNP0C0B:03: registered as cooling_device5
>ACPI: Fan [C328] (on)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>udevd version 128 started
>: usbcore: registered new interface driver usbfs
>: usbcore: registered new interface driver hub
>: usbcore: registered new device driver usb
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100GB/93.1GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100GB/93.1GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8584000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>USB Universal Host Controller Interface driver v3.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
> sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27.5-2-pae ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006020
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27.5-2-pae uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>hub 1-1:1.0: USB hub found
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>hub 1-1:1.0: 3 ports detected
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006040
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: New USB device found, idVendor=0424, idProduct=2503
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27.5-2-pae uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006060
>usb 1-4: new high speed USB device using ehci_hcd and address 4
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27.5-2-pae uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006080
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27.5-2-pae uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb 1-4: configuration #1 chosen from 1 choice
>usb 1-4: New USB device found, idVendor=046d, idProduct=0990
>usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=2
>usb 1-4: SerialNumber: F53EAFEC
>usb 1-1.2: new full speed USB device using ehci_hcd and address 5
>usb 1-1.2: configuration #1 chosen from 1 choice
>usb 1-1.2: New USB device found, idVendor=08ff, idProduct=2580
>usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-1.2: Product: Fingerprint Sensor
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: New USB device found, idVendor=046d, idProduct=c00e
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: USB-PS/2 Optical Mouse
>usb 3-1: Manufacturer: Logitech
>: usbcore: registered new interface driver hiddev
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2
>input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
>: usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>PM: Starting manual resume from disk
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>udevd version 128 started
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>Linux video capture interface: v2.00
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>ACPI: AC Adapter [C1BA] (on-line)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button (FF) [PWRF]
>ACPI: Battery Slot [C1BC] (battery present)
>parport_pc 00:03: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>Linux agpgart interface v0.103
>intel_rng: FWH not detected
>ACPI: Battery Slot [C1BB] (battery present)
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
>hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>ACPI: Sleep Button (CM) [C23F]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
>ACPI: Lid Switch [C238]
>ACPI: WMI: Mapper loaded
>tg3.c:v3.94 (August 14, 2008)
>vendor=8086 device=2448
>tg3 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:08:42:e9:36
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
>eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
>vendor=8086 device=2448
>tifm_7xx1 0000:02:06.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990)
>vendor=8086 device=2448
>ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ppdev: user-space parallel port driver
>input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[e8101000-e81017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>: rtc0: alarms up to one month, y3k, hpet irqs
>: usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>agpgart-intel 0000:00:00.0: Intel 945GM Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>Yenta: CardBus bridge found at 0000:02:06.0 [103c:30aa]
>Yenta: Enabling burst memory read transactions
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:06.0, mfunc 0x01a61b22, devctl 0x64
>iTCO_vendor_support: vendor-support=0
>acpi device:03: registered as cooling_device6
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input8
>Yenta: ISA IRQ mask 0x0c68, PCI irq 18
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>sdhci: Secure Digital Host Controller Interface driver
>pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
>cs: IO port probe 0x7000-0x7fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe8100000 - 0xe83fffff
>pcmcia: parent PCI bridge Memory window: 0xc0000000 - 0xc3ffffff
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (rev 0)
>vendor=8086 device=2448
>ACPI: Video Device [C083] (multi-head: yes  rom: no  post: no)
>sdhci-pci 0000:02:06.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>vendor=8086 device=27d0
>iwl3945 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>iwl3945 0000:08:00.0: setting latency timer to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>vendor=8086 device=27d0
>iwl3945 0000:08:00.0: PCI INT A disabled
>cs: IO port probe 0xa00-0xaff: clean.
>: usbcore: registered new interface driver snd-usb-audio
>Adding 3148732k swap on /dev/sda2.  Priority:-1 extents:1 across:3148732k
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>type=1505 audit(1227100650.565:2): operation="profile_load" name="/bin/ping" name2="default" pid=2352
>type=1505 audit(1227100650.933:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=2399
>type=1505 audit(1227100651.337:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=2433
>type=1505 audit(1227100651.737:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=2487
>type=1505 audit(1227100652.085:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=2505
>type=1505 audit(1227100652.421:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=2506
>type=1505 audit(1227100652.744:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=2507
>type=1505 audit(1227100653.148:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=2508
>type=1505 audit(1227100653.724:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=2509
>powernow: This module only works with AMD K7 CPUs
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 2 processor cores.
>vboxdrv: fAsync=0 offMin=0x594 offMax=0x1890
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 2.0.4_OSE (interface 0x00090000).
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>[drm:i915_getparam] *ERROR* Unknown parameter 5
>[drm:i915_getparam] *ERROR* Unknown parameter 5
>Not cloning cgroup for unused subsystem ns
>vendor=8086 device=27d0
>iwl3945 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>iwl3945 0000:08:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
>firmware: requesting iwlwifi-3945-1.ucode
>iwl3945: Radio disabled by HW RF Kill switch
>vendor=8086 device=27d0
>iwl3945 0000:08:00.0: PCI INT A disabled
>vendor=8086 device=27d0
>iwl3945 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>iwl3945 0000:08:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
>iwl3945: Radio disabled by HW RF Kill switch
>vendor=8086 device=27d0
>iwl3945 0000:08:00.0: PCI INT A disabled
>NET: Registered protocol family 17
>bootsplash: status on console 0 changed to on
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>martian source 255.255.255.255 from 172.23.6.123, on dev eth0
>ll header: ff:ff:ff:ff:ff:ff:00:17:f2:f5:0a:79:08:00
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.23.6.130 DST=224.0.0.251 LEN=391 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=371
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.23.6.130 DST=224.0.0.251 LEN=275 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=255
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.23.6.130 DST=224.0.0.251 LEN=391 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=371
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.23.6.130 DST=224.0.0.251 LEN=391 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=371
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.23.6.130 DST=224.0.0.251 LEN=361 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=341
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.23.6.130 DST=224.0.0.251 LEN=406 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=386
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.23.6.130 DST=224.0.0.251 LEN=361 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=341
>SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:42:e9:36:00:16:9c:75:60:00:08:00 SRC=193.225.93.11 DST=172.23.6.130 LEN=52 TOS=0x00 PREC=0x00 TTL=63 ID=61678 DF PROTO=TCP SPT=995 DPT=44408 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A0F4E3E800015AC34)
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>process `skype' is using obsolete setsockopt SO_BSDCOMPAT
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>__ratelimit: 3 callbacks suppressed
>: ACPI: EC: missing confirmations, switch off interrupt mode.
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
>ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.C002.C003.C005.C194] (Node f5849978), AE_TIME
>ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.C315] (Node f584d9f0), AE_TIME
>ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.C322._ON_] (Node f584d888), AE_TIME
>ACPI: Transitioning device [C326] to D0
>ACPI: Unable to turn cooling device [f584dfe0] 'on'
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
>ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.C002.C003.C005.C194] (Node f5849978), AE_TIME
>ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.C315] (Node f584d9f0), AE_TIME
>ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.C321._OFF] (Node f584d8c4), AE_TIME
>ACPI: Transitioning device [C325] to D3
>ACPI: Unable to turn cooling device [f584d7c0] 'off'
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
>ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.C002.C003.C005.C194] (Node f5849978), AE_TIME
>ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.C315] (Node f584d9f0), AE_TIME
>ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.C321._ON_] (Node f584d8d8), AE_TIME
>ACPI: Transitioning device [C325] to D0
>ACPI: Unable to turn cooling device [f584d7c0] 'on'
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
>ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.C002.C003.C005.C194] (Node f5849978), AE_TIME
>ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.C315] (Node f584d9f0), AE_TIME
>ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.C321._OFF] (Node f584d8c4), AE_TIME
>ACPI: Transitioning device [C325] to D3
>ACPI: Unable to turn cooling device [f584d7c0] 'off'
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command
>hda: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: drive not ready for command

Actions: View

Attachments on bug 446607: 253477 | 253478 | 253479 | 253483 | 253491 | 254342