Attachment 262810 Details for Bug 462667

dmesg

dmesg.txt (text/plain), 42.14 KB, created by Forgotten User 7Vd19u3Vod on 2008-12-30 20:45:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Forgotten User 7Vd19u3Vod

Created: 2008-12-30 20:45:14 UTC

Size: 42.14 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27.7-9-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
>Command line: root=/dev/disk/by-id/ata-ST3500820AS_9QM1Q3SQ-part1 splash=silent vga=0x31a
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
> BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
> BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
> BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>DMI 2.4 present.
>last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>last_pfn = 0xcfee0 max_arch_pfn = 0x3ffffffff
>init_memory_mapping
>Using GB pages for direct mapping
> 0000000000 - 00c0000000 page 1G
> 00c0000000 - 00cfe00000 page 2M
> 00cfe00000 - 00cfee0000 page 4k
>kernel direct mapping tables up to cfee0000 @ 8000-b000
>last_map_addr: cfee0000 end: cfee0000
>init_memory_mapping
>Using GB pages for direct mapping
> 0100000000 - 0130000000 page 2M
>kernel direct mapping tables up to 130000000 @ a000-c000
>last_map_addr: 130000000 end: 130000000
>RAMDISK: 37a17000 - 37fef743
>ACPI: RSDP 000F6970, 0014 (r0 GBT   )
>ACPI: RSDT CFEE3000, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: FACP CFEE3040, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: DSDT CFEE30C0, 6299 (r1 GBT    GBTUACPI     1000 MSFT  3000000)
>ACPI: FACS CFEE0000, 0040
>ACPI: SSDT CFEE9440, 0544 (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: HPET CFEE99C0, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
>ACPI: MCFG CFEE9A00, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: APIC CFEE9380, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: Local APIC address 0xfee00000
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000130000000
>Bootmem setup node 0 0000000000000000-0000000130000000
>  NODE_DATA [000000000000b000 - 0000000000022fff]
>  bootmap [0000000000023000 -  0000000000048fff] pages 26
>(7 early reservations) ==> bootmem [0000000000 - 0130000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000bf27b8]    TEXT DATA BSS ==> [0000200000 - 0000bf27b8]
>  #3 [0037a17000 - 0037fef743]          RAMDISK ==> [0037a17000 - 0037fef743]
>  #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
>  #6 [000000a000 - 000000b000]          PGTABLE ==> [000000a000 - 000000b000]
>found SMP MP-table at [ffff8800000f4fb0] 000f4fb0
> [ffffe20000000000-ffffe20004bfffff] PMD -> [ffff880028200000-ffff88002c1fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00130000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x000cfee0
>    0: 0x00100000 -> 0x00130000
>On node 0 totalpages: 1048191
>  DMA zone: 1285 pages, LIFO batch:0
>  DMA32 zone: 831264 pages, LIFO batch:31
>  Normal zone: 193536 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
>PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
>PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
>PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
>PERCPU: Allocating 62240 bytes of per cpu data
>NR_CPUS: 512, nr_cpu_ids: 4, nr_node_ids 1
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1026085
>Policy zone: Normal
>Kernel command line: root=/dev/disk/by-id/ata-ST3500820AS_9QM1Q3SQ-part1 splash=silent vga=0x31a
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC: Unable to calibrate against PIT
>TSC: using PMTIMER reference calibration
>Detected 2210.057 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 802000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ 20000000
>PM: Registered nosave memory: 0000000020000000 - 0000000024000000
>Memory: 4044936k/4980736k available (2731k kernel code, 147828k reserved, 2620k data, 1472k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.10 BogoMIPS (lpj=8840216)
>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
>Security Framework initialized
>SELinux:  Disabled at boot.
>AppArmor: AppArmor initialized
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>tseg: 00cff00000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>using C1E aware idle routine
>ACPI: Core revision 20080609
>ACPI: Checking initramfs for custom DSDT
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 784 Objects with 65 Devices 211 Methods 26 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 20 Objects with 0 Devices 0 Methods 0 Regions
> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
>Using local APIC timer interrupts.
>APIC timer calibration result 12557143
>Detected 12.557 MHz APIC timer.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4420.92 BogoMIPS (lpj=8841845)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Booting processor 2/2 ip 6000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4420.16 BogoMIPS (lpj=8840332)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 2/2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
>CPU2: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
>checking TSC synchronization [CPU#1 -> CPU#2]: passed.
>Booting processor 3/3 ip 6000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4420.19 BogoMIPS (lpj=8840387)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 3/3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
>CPU3: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
>checking TSC synchronization [CPU#2 -> CPU#3]: passed.
>Brought up 4 CPUs
>Total of 4 processors activated (17681.39 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 0 1 2 3
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>CPU1 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 1 2 3 0
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>CPU2 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 2 3 0 1
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>CPU3 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 3 0 1 2
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>net_namespace: 1936 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>node 0 link 0: io port [c000, ffff]
>TOM: 00000000d0000000 aka 3328M
>Fam 10h mmconf [e0000000, e00fffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [d0000000, fe02ffff] ==> [d0000000, dfffffff] and [e0100000, fe02ffff]
>node 0 link 0: mmio [e0000000, efffffff] ==> [e0100000, efffffff]
>TOM2: 0000000130000000 aka 4864M
>bus: [00,03] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [a0000, bffff]
>bus: 00 index 2 mmio: [d0000000, dfffffff]
>bus: 00 index 3 mmio: [e0100000, ffffffff]
>bus: 00 index 4 mmio: [130000000, fcffffffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1 for base access
>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:......................................................................................................
>Initialized 17/26 Regions 2/2 Fields 24/24 Buffers 59/59 Packages (813 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:..
>Executed 2 _INI methods requiring 1 _STA executions (examined 71 objects)
>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 11 Runtime GPEs in this block
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: 0000:00:00.0 reg 1c 64bit mmio: [e0000000, ffffffff]
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>PCI: 0000:00:12.0 reg 10 io port: [0, 7]
>PCI: 0000:00:12.0 reg 14 io port: [0, 3]
>PCI: 0000:00:12.0 reg 18 io port: [0, 7]
>PCI: 0000:00:12.0 reg 1c io port: [0, 3]
>PCI: 0000:00:12.0 reg 20 io port: [ff00, ff0f]
>PCI: 0000:00:12.0 reg 24 32bit mmio: [fec01000, fec013ff]
>pci 0000:00:12.0: set SATA to AHCI mode
>PCI: 0000:00:13.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
>PCI: 0000:00:13.1 reg 10 32bit mmio: [fe02e000, fe02efff]
>PCI: 0000:00:13.2 reg 10 32bit mmio: [fe02d000, fe02dfff]
>PCI: 0000:00:13.3 reg 10 32bit mmio: [fe02c000, fe02cfff]
>PCI: 0000:00:13.4 reg 10 32bit mmio: [fe02b000, fe02bfff]
>PCI: 0000:00:13.5 reg 10 32bit mmio: [fe02a000, fe02a0ff]
>pci 0000:00:13.5: supports D1
>pci 0000:00:13.5: supports D2
>pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.5: PME# disabled
>disabled boot interrupts on PCI device 0x1002:0x4385
>PCI: 0000:00:14.0 reg 10 io port: [b00, b0f]
>PCI: 0000:00:14.1 reg 10 io port: [fd00, fd07]
>PCI: 0000:00:14.1 reg 14 io port: [fc00, fc03]
>PCI: 0000:00:14.1 reg 18 io port: [fb00, fb07]
>PCI: 0000:00:14.1 reg 1c io port: [fa00, fa03]
>PCI: 0000:00:14.1 reg 20 io port: [f900, f90f]
>PCI: 0000:00:14.2 reg 10 64bit mmio: [fe024000, fe027fff]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: PME# disabled
>PCI: 0000:01:00.0 reg 10 32bit mmio: [fa000000, faffffff]
>PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
>PCI: 0000:01:00.0 reg 1c 64bit mmio: [fb000000, fbffffff]
>PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:02.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:02.0 io port: [d000, dfff]
>PCI: bridge 0000:00:02.0 32bit mmio: [fa000000, fcffffff]
>PCI: bridge 0000:00:02.0 64bit mmio pref: [d0000000, dfffffff]
>PCI: 0000:02:00.0 reg 10 io port: [ee00, eeff]
>PCI: 0000:02:00.0 reg 18 64bit mmio: [fdfff000, fdffffff]
>PCI: 0000:02:00.0 reg 30 32bit mmio: [0, 1ffff]
>pci 0000:02:00.0: supports D1
>pci 0000:02:00.0: supports D2
>pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:0a.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:0a.0 io port: [e000, efff]
>PCI: bridge 0000:00:0a.0 32bit mmio: [fdf00000, fdffffff]
>PCI: bridge 0000:00:0a.0 64bit mmio pref: [fde00000, fdefffff]
>PCI: 0000:03:06.0 reg 10 32bit mmio: [fddff000, fddff1ff]
>PCI: 0000:03:07.0 reg 10 io port: [ce00, ceff]
>PCI: 0000:03:07.0 reg 14 32bit mmio: [fddfe000, fddfefff]
>PCI: 0000:03:07.0 reg 30 32bit mmio: [0, ffff]
>PCI: 0000:03:0e.0 reg 10 32bit mmio: [fddfd000, fddfd7ff]
>PCI: 0000:03:0e.0 reg 14 32bit mmio: [fddf8000, fddfbfff]
>pci 0000:03:0e.0: supports D1
>pci 0000:03:0e.0: supports D2
>pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:03:0e.0: PME# disabled
>pci 0000:00:14.4: transparent bridge
>PCI: bridge 0000:00:14.4 io port: [c000, cfff]
>PCI: bridge 0000:00:14.4 32bit mmio: [fdd00000, fddfffff]
>PCI: bridge 0000:00:14.4 32bit mmio pref: [fdc00000, fdcfffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:0d: mem resource (0xe0000000-0xefffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
>pnp 00:0e: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
>pnp 00:0e: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
>pnp 00:0e: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
>pnp 00:0e: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>pci 0000:00:00.0: BAR 3: can't allocate resource
>pci 0000:00:12.0: BAR 5: can't allocate resource
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ 20000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 32-bit timers, 14318180 Hz
>AppArmor: AppArmor Filesystem Enabled
>Switched to high resolution mode on CPU 0
>ACPI: RTC can wake from S4
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 3
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x220-0x225 has been reserved
>system 00:01: ioport range 0x290-0x294 has been reserved
>system 00:02: ioport range 0x4100-0x411f has been reserved
>system 00:02: ioport range 0x228-0x22f has been reserved
>system 00:02: ioport range 0x40b-0x40b has been reserved
>system 00:02: ioport range 0x4d6-0x4d6 has been reserved
>system 00:02: ioport range 0xc00-0xc01 has been reserved
>system 00:02: ioport range 0xc14-0xc14 has been reserved
>system 00:02: ioport range 0xc50-0xc52 has been reserved
>system 00:02: ioport range 0xc6c-0xc6d has been reserved
>system 00:02: ioport range 0xc6f-0xc6f has been reserved
>system 00:02: ioport range 0xcd0-0xcd1 has been reserved
>system 00:02: ioport range 0xcd2-0xcd3 has been reserved
>system 00:02: ioport range 0xcd4-0xcdf has been reserved
>system 00:02: ioport range 0x4000-0x40fe has been reserved
>system 00:02: ioport range 0x4210-0x4217 has been reserved
>system 00:02: ioport range 0xb00-0xb1f could not be reserved
>system 00:02: ioport range 0x238-0x23f has been reserved
>system 00:0e: iomem range 0xd2800-0xd3fff has been reserved
>system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0e: iomem range 0xcfee0000-0xcfefffff could not be reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0x100000-0xcfedffff could not be reserved
>pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:02.0:   IO window: 0xd000-0xdfff
>pci 0000:00:02.0:   MEM window: 0xfa000000-0xfcffffff
>pci 0000:00:02.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:0a.0:   IO window: 0xe000-0xefff
>pci 0000:00:0a.0:   MEM window: 0xfdf00000-0xfdffffff
>pci 0000:00:0a.0:   PREFETCH window: 0x000000fde00000-0x000000fdefffff
>pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
>pci 0000:00:14.4:   IO window: 0xc000-0xcfff
>pci 0000:00:14.4:   MEM window: 0xfdd00000-0xfddfffff
>pci 0000:00:14.4:   PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:0a.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [d000, dfff]
>bus: 01 index 1 mmio: [fa000000, fcffffff]
>bus: 01 index 2 mmio: [d0000000, dfffffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 02 index 0 io port: [e000, efff]
>bus: 02 index 1 mmio: [fdf00000, fdffffff]
>bus: 02 index 2 mmio: [fde00000, fdefffff]
>bus: 02 index 3 mmio: [0, 0]
>bus: 03 index 0 io port: [c000, cfff]
>bus: 03 index 1 mmio: [fdd00000, fddfffff]
>bus: 03 index 2 mmio: [fdc00000, fdcfffff]
>bus: 03 index 3 io port: [0, ffff]
>bus: 03 index 4 mmio: [0, ffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Unpacking initramfs... done
>Freeing initrd memory: 5985k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1230641657.860:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 1977
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pcieport-driver 0000:00:02.0: setting latency timer to 64
>pcieport-driver 0000:00:02.0: found MSI capability
>pci_express 0000:00:02.0:pcie00: allocate port service
>pcieport-driver 0000:00:0a.0: setting latency timer to 64
>pcieport-driver 0000:00:0a.0: found MSI capability
>pci_express 0000:00:0a.0:pcie00: allocate port service
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20011100000, using 10240k, total 262144k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 113709 bytes
>bootsplash: ...found (1280x1024, 43709 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver8 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>registered taskstats version 1
>Freeing unused kernel memory: 1472k freed
>Write protecting the kernel read-only data: 5024k
>SCSI subsystem initialized
>vendor=1002 device=4384
>aic7xxx 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 2940 SCSI adapter>
>        aic7870: Single Channel A, SCSI Id=0, 16/253 SCBs
>
>scsi 0:0:4:0: Sequential-Access CONNER   CTT8000-S        1.17 PQ: 0 ANSI: 2
>scsi target0:0:4: Beginning Domain Validation
>scsi target0:0:4: FAST-5 SCSI 5.0 MB/s ST (200 ns, offset 15)
>scsi target0:0:4: Domain Validation skipping write tests
>scsi target0:0:4: Ending Domain Validation
>scsi 0:0:5:0: Scanner           UMAX     Astra 610S       V1.3 PQ: 0 ANSI: 2
>scsi target0:0:5: Beginning Domain Validation
>scsi target0:0:5: Ending Domain Validation
>ACPI: No dock devices found.
>libata version 3.00 loaded.
>pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>scsi1 : pata_atiixp
>scsi2 : pata_atiixp
>ata1: PATA max UDMA/100 cmd 0xfd00 ctl 0xfc00 bmdma 0xf900 irq 16
>ata2: PATA max UDMA/100 cmd 0xfb00 ctl 0xfa00 bmdma 0xf908 irq 16
>ata1.00: ATAPI: SONY    DVD-ROM DDU1615, GYN2, max UDMA/66
>ata1.01: ATAPI: Optiarc DVD RW AD-7200A, 1.06, max UDMA/66
>ata1.00: configured for UDMA/66
>ata1.01: configured for UDMA/66
>scsi 1:0:0:0: CD-ROM            SONY     DVD-ROM DDU1615  GYN2 PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            Optiarc  DVD RW AD-7200A  1.06 PQ: 0 ANSI: 5
>ahci 0000:00:12.0: version 3.0
>ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part 
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>scsi6 : ahci
>ata3: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22
>ata4: SATA max UDMA/133 abar m1024@0xf0000000 port 0xf0000180 irq 22
>ata5: SATA max UDMA/133 abar m1024@0xf0000000 port 0xf0000200 irq 22
>ata6: SATA max UDMA/133 abar m1024@0xf0000000 port 0xf0000280 irq 22
>ata3: softreset failed (device not ready)
>ata3: failed due to HW bug, retry pmp=0
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: HPA unlocked: 976771055 -> 976773168, native 976773168
>ata3.00: ATA-8: ST3500820AS, SD36, max UDMA/133
>ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata3.00: configured for UDMA/133
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: softreset failed (device not ready)
>ata5: failed due to HW bug, retry pmp=0
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATA-8: ST3500820AS, SD36, max UDMA/133
>ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata5.00: configured for UDMA/133
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 3:0:0:0: Direct-Access     ATA      ST3500820AS      SD36 PQ: 0 ANSI: 5
>scsi 5:0:0:0: Direct-Access     ATA      ST3500820AS      SD36 PQ: 0 ANSI: 5
>processor ACPI_CPU:00: registered as cooling_device0
>processor ACPI_CPU:01: registered as cooling_device1
>processor ACPI_CPU:02: registered as cooling_device2
>processor ACPI_CPU:03: registered as cooling_device3
>Uniform Multi-Platform E-IDE driver
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>udevd version 128 started
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors: (500GB/465GiB)
>sd 3:0:0:0: [sda] Write Protect is off
>sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors: (500GB/465GiB)
>sd 3:0:0:0: [sda] Write Protect is off
>sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe02a000
> sda1 sda2 sda3
>sd 3:0:0:0: [sda] Attached SCSI disk
>sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500GB/465GiB)
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>sd 5:0:0:0: [sdb] Write Protect is off
>sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500GB/465GiB)
>sd 5:0:0:0: [sdb] Write Protect is off
>sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
>sd 5:0:0:0: [sdb] Attached SCSI disk
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27.7-9-default ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.5
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02f000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 1-7: new high speed USB device using ehci_hcd and address 3
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02e000
>usb 1-7: configuration #1 chosen from 1 choice
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-7: New USB device found, idVendor=058f, idProduct=6362
>usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-7: Product: Mass Storage Device
>usb 1-7: Manufacturer: Generic
>usb 1-7: SerialNumber: 058F63626376
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02d000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd
>usb usb4: SerialNumber: 0000:00:13.2
>ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02c000
>usb 3-2: new full speed USB device using ohci_hcd and address 2
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 3-2: configuration #1 chosen from 1 choice
>usb 3-2: New USB device found, idVendor=05a9, idProduct=a511
>usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd
>usb usb5: SerialNumber: 0000:00:13.3
>ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02b000
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: OHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd
>usb usb6: SerialNumber: 0000:00:13.4
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>udevd version 128 started
>scsi 0:0:4:0: Attached scsi generic sg0 type 1
>scsi 0:0:5:0: Attached scsi generic sg1 type 6
>scsi 1:0:0:0: Attached scsi generic sg2 type 5
>scsi 1:0:1:0: Attached scsi generic sg3 type 5
>sd 3:0:0:0: Attached scsi generic sg4 type 0
>sd 5:0:0:0: Attached scsi generic sg5 type 0
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
>sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 1:0:1:0: Attached scsi CD-ROM sr1
>input: PC Speaker as /devices/platform/pcspkr/input/input4
>Initializing USB Mass Storage driver...
>ACPI: Power Button (CM) [PWRB]
>ACPI: WMI: Mapper loaded
>scsi7 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>vendor=1002 device=597f
>r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>r8169 0000:02:00.0: setting latency timer to 64
>eth0: RTL8168b/8111b at 0xffffc2000067c000, 00:1d:7d:d7:e5:d1, XID 38000000 IRQ 4349
>st: Version 20080504, fixed bufsize 32768, s/g segs 256
>st 0:0:4:0: Attached scsi tape st0
>st 0:0:4:0: st0: try direct i/o: yes (alignment 4 B)
>Linux video capture interface: v2.00
>ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
>ACPI: Device needs an ACPI driver
>piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
>IT8718 SuperIO detected.
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>vendor=1002 device=4384
>ohci1394 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fddfd000-fddfd7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>nvidia: module license 'NVIDIA' taints kernel.
>vendor=1002 device=5978
>nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>nvidia 0000:01:00.0: setting latency timer to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  177.82  Tue Nov  4 16:50:05 PST 2008
>scsi 7:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 7:0:0:0: [sdc] Attached SCSI removable disk
>sd 7:0:0:0: Attached scsi generic sg6 type 0
>ov511: USB OV511+ video device found
>scsi 7:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 7:0:0:1: [sdd] Attached SCSI removable disk
>sd 7:0:0:1: Attached scsi generic sg7 type 0
>scsi 7:0:0:2: Direct-Access     Generic  USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
>sd 7:0:0:2: [sde] Attached SCSI removable disk
>sd 7:0:0:2: Attached scsi generic sg8 type 0
>scsi 7:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 7:0:0:3: [sdf] Attached SCSI removable disk
>sd 7:0:0:3: Attached scsi generic sg9 type 0
>usb-storage: device scan complete
>osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>ov511: model: Generic Camera (no ID)
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, hpet irqs
>ppdev: user-space parallel port driver
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ALSA sound/pci/hda/hda_codec.c:2334: hda_codec: model 'auto' is selected
>saa7146: register extension 'dvb'.
>ALSA sound/pci/hda/hda_codec.c:3047: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
>ALSA sound/pci/hda/hda_codec.c:3051:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3055:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3056:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:3064:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0
>vendor=1002 device=4384
>dvb 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>saa7146: found saa7146 @ mem ffffc20011084000 (revision 1, irq 20) (0x13c2,0x0002).
>firmware: requesting dvb-ttpci-01.fw
>DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-C rev2.X)
>adapter has MAC addr = 00:d0:5c:22:e3:f5
>ov511: Sensor is an OV7620
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00db74a000001d7d]
>dvb-ttpci: gpioirq unknown type=0 len=0
>dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
>dvb-ttpci: firmware @ card 0 supports CI link layer interface
>dvb-ttpci: adac type set to 0 @ card 0
>saa7146_vv: saa7146 (0): registered device video0 [v4l2]
>saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
>DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
>input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:14.4/0000:03:06.0/input/input5
>dvb-ttpci: found av7110-0.
>ov511: Device at usb-0000:00:13.1-2 registered to minor 1
>usbcore: registered new interface driver ov511
>ov511: v1.64 for Linux 2.5 : ov511 USB Camera Driver
>Adding 8193140k swap on /dev/sdb1.  Priority:-1 extents:1 across:8193140k
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>bootsplash: status on console 0 changed to off
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1505 audit(1230641796.479:2): operation="profile_load" name="/bin/ping" name2="default" pid=2322
>type=1505 audit(1230641796.510:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=2323
>type=1505 audit(1230641796.574:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=2324
>type=1505 audit(1230641796.646:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=2380
>type=1505 audit(1230641796.714:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=2415
>fuse init (API version 7.9)
>type=1505 audit(1230641796.794:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=2436
>type=1505 audit(1230641796.874:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=2457
>type=1505 audit(1230641796.959:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=2472
>type=1505 audit(1230641797.090:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=2488
>type=1505 audit(1230641797.150:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=2522
>powernow-k8: Found 1 AMD Phenom(tm) 9550 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
>powernow-k8:    0 : pstate 0 (2200 MHz)
>powernow-k8:    1 : pstate 1 (1100 MHz)
>vboxadd: VirtualBox PCI device not found.
>vboxadd: VirtualBox PCI device not found.
>vboxvfs: Unknown symbol vboxadd_cmc_open
>vboxvfs: Unknown symbol vboxadd_cmc_ctl_guest_filter_mask
>vboxvfs: Unknown symbol vboxadd_cmc_call
>vboxvfs: Unknown symbol RTAssertDoBreakpoint
>vboxvfs: Unknown symbol vboxadd_cmc_close
>r8169: eth0: link up
>r8169: eth0: link up
>NET: Registered protocol family 17
>device eth0 entered promiscuous mode
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 4 processor cores.
>vboxdrv: fAsync=0 offMin=0x583 offMax=0x2826
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 2.0.6_OSE (interface 0x00090000).
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU2 attaching NULL sched-domain.
>CPU3 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 0 1 2 3
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>CPU1 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 1 2 3 0
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>CPU2 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 2 3 0 1
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>CPU3 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 3 0 1 2
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>hda-intel: Invalid position buffer, using LPIB read method instead.
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU2 attaching NULL sched-domain.
>CPU3 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 0 1 2 3
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>CPU1 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 1 2 3 0
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>CPU2 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 2 3 0 1
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>CPU3 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 3 0 1 2
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>usb 1-7: reset high speed USB device using ehci_hcd and address 3
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU2 attaching NULL sched-domain.
>CPU3 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 0 1 2 3
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>CPU1 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 1 2 3 0
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>CPU2 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 2 3 0 1
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>CPU3 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 3 0 1 2
>  domain 1: span 0-3 level NODE
>   groups: 0-3
>pulseaudio[4589]: segfault at 7f97d071f2a0 ip 00007f97d071f2a0 sp 00007fffe1a32758 error 14
>DVB: frontend 0 frequency 3346000 out of range (47000000..862000000)
>DVB: frontend 0 frequency 3346000 out of range (47000000..862000000)
>DVB: frontend 0 frequency 3346000 out of range (47000000..862000000)
>DVB: frontend 0 frequency 3346000 out of range (47000000..862000000)
>DVB: frontend 0 frequency 3346000 out of range (47000000..862000000)
>DVB: frontend 0 frequency 3346000 out of range (47000000..862000000)
>DVB: frontend 0 frequency 3346000 out of range (47000000..862000000)
>DVB: frontend 0 frequency 3346000 out of range (47000000..862000000)
>DVB: frontend 0 frequency 3346000 out of range (47000000..862000000)
>DVB: frontend 0 frequency 3346000 out of range (47000000..862000000)
>parport_pc 00:0a: disabled
>parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
>parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
>parport 0x378: You gave this address, but there is probably no parallel port there!
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>lp0: using parport0 (polling).
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>IT8718 SuperIO detected.
>parport_pc 00:0a: activated
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>lp0: using parport0 (interrupt-driven).
>ppa: Version 2.07 (for Linux 2.4.x)

Actions: View

Attachments on bug 462667: 262808 | 262809 | 262810 | 262811 | 264292