Attachment 264620 Details for Bug 464998

/var/log/boot.msg

boot.msg (text/plain), 46.85 KB, created by michel munnix on 2009-01-12 20:56:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: michel munnix

Created: 2009-01-12 20:56:22 UTC

Size: 46.85 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.27.7-9-default
>Cannot find map file.
>No module symbols loaded - kernel modules not enabled.
>
>Cannot build symbol table - disabling symbol lookups
>klogd 1.4.1, log source = ksyslog started.
><6>Initializing cgroup subsys cpuset
><6>Initializing cgroup subsys cpu
><5>Linux version 2.6.27.7-9-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
><6>Command line: root=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 resume=/dev/disk/by-id/ata-SAMSUNG_SP2514N_S08BJ1FYB10301-part5 splash=silent vga=0x31a
><4>KERNEL supported cpus:
><4>  Intel GenuineIntel
><4>  AMD AuthenticAMD
><4>  Centaur CentaurHauls
><6>BIOS-provided physical RAM map:
><6> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><6> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><6> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
><6> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
><6> BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
><6> BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
><6> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
><6> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
><6>DMI present.
><5>AMI BIOS detected: BIOS may corrupt low RAM, working it around.
><6>last_pfn = 0x7ffb0 max_arch_pfn = 0x3ffffffff
><6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
><6>init_memory_mapping
><7> 0000000000 - 007fe00000 page 2M
><7> 007fe00000 - 007ffb0000 page 4k
><7>kernel direct mapping tables up to 7ffb0000 @ 10000-14000
><6>last_map_addr: 7ffb0000 end: 7ffb0000
><6>RAMDISK: 37a2e000 - 37fef619
><4>ACPI: RSDP 000F9660, 0014 (r0 ACPIAM)
><4>ACPI: RSDT 7FFB0000, 0038 (r1 A_M_I  OEMRSDT   5000704 MSFT       97)
><4>ACPI: FACP 7FFB0200, 0084 (r2 A M I  OEMFACP  12000601 MSFT       97)
><4>ACPI: DSDT 7FFB03F0, 3D0F (r1  M2N3V M2N3V182      182 INTL  2002026)
><4>ACPI: FACS 7FFC0000, 0040
><4>ACPI: APIC 7FFB0390, 005C (r1 A_M_I  OEMAPIC   5000704 MSFT       97)
><4>ACPI: OEMB 7FFC0040, 0056 (r1 A_M_I  AMI_OEM   5000704 MSFT       97)
><4>ACPI: HPET 7FFB4100, 0038 (r1 A_M_I  OEMHPET0  5000704 MSFT       97)
><4>ACPI: SSDT 7FFB4140, 0206 (r1 A M I  POWERNOW        1 AMD         1)
><7>ACPI: Local APIC address 0xfee00000
><6>Scanning NUMA topology in Northbridge 24
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-000000007ffb0000
><6>Bootmem setup node 0 0000000000000000-000000007ffb0000
><6>  NODE_DATA [0000000000012000 - 0000000000029fff]
><6>  bootmap [000000000002a000 -  0000000000039ff7] pages 10
><6>(6 early reservations) ==> bootmem [0000000000 - 007ffb0000]
><6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
><6>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
><6>  #2 [0000200000 - 0000bf27b8]    TEXT DATA BSS ==> [0000200000 - 0000bf27b8]
><6>  #3 [0037a2e000 - 0037fef619]          RAMDISK ==> [0037a2e000 - 0037fef619]
><6>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
><6>  #5 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
><7> [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0
><4>Zone PFN ranges:
><4>  DMA      0x00000010 -> 0x00001000
><4>  DMA32    0x00001000 -> 0x00100000
><4>  Normal   0x00100000 -> 0x00100000
><4>Movable zone start PFN for each node
><4>early_node_map[2] active PFN ranges
><4>    0: 0x00000010 -> 0x0000009f
><4>    0: 0x00000100 -> 0x0007ffb0
><7>On node 0 totalpages: 524095
><7>  DMA zone: 1272 pages, LIFO batch:0
><7>  DMA32 zone: 511985 pages, LIFO batch:31
><6>Detected use of extended apic ids on hypertransport bus
><6>ACPI: PM-Timer IO Port: 0x4008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><6>ACPI: HPET id: 0x10de8201 base: 0xfed00000
><6>Using ACPI (MADT) for SMP configuration information
><6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
><6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
><6>PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
><6>Allocating PCI resources starting at 88000000 (gap: 80000000:7f000000)
><6>PERCPU: Allocating 62240 bytes of per cpu data
><7>NR_CPUS: 512, nr_cpu_ids: 2, nr_node_ids 1
><4>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513257
><4>Policy zone: DMA32
><5>Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 resume=/dev/disk/by-id/ata-SAMSUNG_SP2514N_S08BJ1FYB10301-part5 splash=silent vga=0x31a
><6>bootsplash: silent mode.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>TSC: PIT calibration confirmed by PMTIMER.
><6>TSC: using PIT calibration value
><4>Detected 2110.240 MHz processor.
><7>spurious 8259A interrupt: IRQ7.
><4>Console: colour dummy device 80x25
><6>console [tty0] enabled
><6>Checking aperture...
><6>AGP bridge at 00:00:00
><6>Aperture from AGP @ f4000000 old size 32 MB
><6>Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
><6>Aperture from AGP @ f4000000 size 32 MB (APSIZE 0)
><6>Node 0: aperture @ f4000000 size 64 MB
><6>Memory: 2047168k/2096832k available (2731k kernel code, 49212k reserved, 2620k data, 1472k init)
><7>CPA: page pool initialized 1 of 1 pages preallocated
><7>hpet clockevent registered
><6>Calibrating delay loop (skipped), value calculated using timer frequency.. 4220.48 BogoMIPS (lpj=8440960)
><4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
><6>Security Framework initialized
><6>SELinux:  Disabled at boot.
><6>AppArmor: AppArmor initialized
><6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><6>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Mount-cache hash table entries: 256
><6>Initializing cgroup subsys ns
><6>Initializing cgroup subsys cpuacct
><6>Initializing cgroup subsys memory
><6>Initializing cgroup subsys devices
><6>Initializing cgroup subsys freezer
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 0/0 -> Node 0
><7>tseg: 0000000000
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>using C1E aware idle routine
><6>ACPI: Core revision 20080609
><6>ACPI: Checking initramfs for custom DSDT
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 599 Objects with 60 Devices 212 Methods 15 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
><4> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><6>Setting APIC routing to flat
><6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
><6>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
><6>Using local APIC timer interrupts.
><7>APIC timer calibration result 12561060
><6>Detected 12.561 MHz APIC timer.
><6>Booting processor 1/1 ip 6000
><6>Initializing CPU#1
><6>Calibrating delay using timer specific routine.. 4220.60 BogoMIPS (lpj=8441214)
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 1/1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><6>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
><6>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
><6>Brought up 2 CPUs
><6>Total of 2 processors activated (8441.08 BogoMIPS).
><7>CPU0 attaching sched-domain:
><7> domain 0: span 0-1 level CPU
><7>  groups: 0 1
><7>  domain 1: span 0-1 level NODE
><7>   groups: 0-1
><7>CPU1 attaching sched-domain:
><7> domain 0: span 0-1 level CPU
><7>  groups: 1 0
><7>  domain 1: span 0-1 level NODE
><7>   groups: 0-1
><6>net_namespace: 1936 bytes
><6>Booting paravirtualized kernel on bare hardware
><6>NET: Registered protocol family 16
><7>node 0 link 0: io port [1000, ffffff]
><6>TOM: 0000000080000000 aka 2048M
><7>node 0 link 0: mmio [fed00000, fed0ffff]
><7>node 0 link 0: mmio [a0000, bffff]
><7>node 0 link 0: mmio [80000000, fe0bffff]
><7>bus: [00,ff] on node 0 link 0
><7>bus: 00 index 0 io port: [0, ffff]
><7>bus: 00 index 1 mmio: [fe0c0000, fcffffffff]
><7>bus: 00 index 2 mmio: [a0000, bffff]
><7>bus: 00 index 3 mmio: [80000000, fe0bffff]
><6>ACPI: bus type pci registered
><6>PCI: Using configuration type 1 for base access
><4>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><7>ACPI: EC: Look up EC in DSDT
><4>Completing Region/Field/Buffer/Package initialization:....................................................................................
><4>Initialized 10/15 Regions 20/20 Fields 36/36 Buffers 18/19 Packages (616 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:
><4>Executed 0 _INI methods requiring 0 _STA executions (examined 64 objects)
><4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 0 Runtime GPEs in this block
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
><7>PCI: 0000:00:01.1 reg 10 io port: [5080, 509f]
><7>PCI: 0000:00:01.1 reg 20 io port: [5000, 503f]
><7>PCI: 0000:00:01.1 reg 24 io port: [5040, 507f]
><6>pci 0000:00:01.1: PME# supported from D3hot D3cold
><6>pci 0000:00:01.1: PME# disabled
><7>PCI: 0000:00:02.0 reg 10 32bit mmio: [febff000, febfffff]
><7>pci 0000:00:02.0: supports D1
><7>pci 0000:00:02.0: supports D2
><6>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:02.0: PME# disabled
><7>PCI: 0000:00:02.1 reg 10 32bit mmio: [febfe000, febfefff]
><7>pci 0000:00:02.1: supports D1
><7>pci 0000:00:02.1: supports D2
><6>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:02.1: PME# disabled
><7>PCI: 0000:00:02.2 reg 10 32bit mmio: [febfdc00, febfdcff]
><7>pci 0000:00:02.2: supports D1
><7>pci 0000:00:02.2: supports D2
><6>pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:02.2: PME# disabled
><7>PCI: 0000:00:05.0 reg 10 32bit mmio: [febfc000, febfcfff]
><7>PCI: 0000:00:05.0 reg 14 io port: [ec00, ec07]
><7>pci 0000:00:05.0: supports D1
><7>pci 0000:00:05.0: supports D2
><6>pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:05.0: PME# disabled
><7>PCI: 0000:00:08.0 reg 20 io port: [ffa0, ffaf]
><7>PCI: 0000:00:0a.0 reg 10 io port: [f80, f87]
><7>PCI: 0000:00:0a.0 reg 14 io port: [f00, f03]
><7>PCI: 0000:00:0a.0 reg 18 io port: [e80, e87]
><7>PCI: 0000:00:0a.0 reg 1c io port: [e00, e03]
><7>PCI: 0000:00:0a.0 reg 20 io port: [e000, e00f]
><7>PCI: 0000:00:0a.0 reg 24 io port: [d800, d87f]
><7>PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
><7>PCI: 0000:01:00.0 reg 14 32bit mmio: [e0000000, efffffff]
><7>PCI: 0000:01:00.0 reg 18 32bit mmio: [fc000000, fcffffff]
><7>PCI: 0000:01:00.0 reg 30 32bit mmio: [fe9e0000, fe9fffff]
><7>PCI: bridge 0000:00:0b.0 32bit mmio: [fa900000, fe9fffff]
><7>PCI: bridge 0000:00:0b.0 32bit mmio pref: [d2800000, f27fffff]
><7>PCI: 0000:02:07.0 reg 10 io port: [c800, c8ff]
><7>PCI: 0000:02:07.0 reg 14 32bit mmio: [feaffc00, feaffcff]
><7>PCI: 0000:02:07.0 reg 30 32bit mmio: [feae0000, feaeffff]
><7>pci 0000:02:07.0: supports D1
><7>pci 0000:02:07.0: supports D2
><6>pci 0000:02:07.0: PME# supported from D1 D2 D3hot
><6>pci 0000:02:07.0: PME# disabled
><7>PCI: 0000:02:08.0 reg 10 io port: [c400, c4ff]
><7>PCI: 0000:02:08.0 reg 14 32bit mmio: [feafe000, feafefff]
><7>PCI: 0000:02:08.0 reg 30 32bit mmio: [fead0000, feadffff]
><7>PCI: 0000:02:09.0 reg 10 32bit mmio: [feaff800, feaff9ff]
><7>PCI: bridge 0000:00:0e.0 io port: [c000, cfff]
><7>PCI: bridge 0000:00:0e.0 32bit mmio: [fea00000, feafffff]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
><6>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9
><6>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *9
><6>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *11
><6>ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
><6>ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
><6>ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *5
><6>ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *3
><6>ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *9
><6>ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
><6>ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
><6>ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
><6>ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *10
><6>ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
><6>ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14
><6>ACPI: Power Resource [ISAV] (on)
><4>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 17, should be 0A [20080609]
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 15 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PCI: Using ACPI for IRQ routing
><3>pci 0000:00:00.0: BAR 0: can't allocate resource
><6>agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
><6>agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
><6>agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
><6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
><6>hpet0: 3 32-bit timers, 25000000 Hz
><6>AppArmor: AppArmor Filesystem Enabled
><4>ACPI: RTC can wake from S4
><7>Switched to high resolution mode on CPU 0
><7>Switched to high resolution mode on CPU 1
><6>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
><6>system 00:07: ioport range 0x4000-0x407f has been reserved
><6>system 00:07: ioport range 0x4080-0x40ff has been reserved
><6>system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
><6>system 00:09: iomem range 0xfee00000-0xfeefffff has been reserved
><6>system 00:09: iomem range 0xff380000-0xffffffff could not be reserved
><6>system 00:0d: ioport range 0x290-0x29f has been reserved
><6>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
><6>system 00:0e: iomem range 0xc0000-0xcffff has been reserved
><6>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
><6>system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
><6>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01
><6>pci 0000:00:0b.0:   IO window: disabled
><6>pci 0000:00:0b.0:   MEM window: 0xfa900000-0xfe9fffff
><6>pci 0000:00:0b.0:   PREFETCH window: 0x000000d2800000-0x000000f27fffff
><6>pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
><6>pci 0000:00:0e.0:   IO window: 0xc000-0xcfff
><6>pci 0000:00:0e.0:   MEM window: 0xfea00000-0xfeafffff
><6>pci 0000:00:0e.0:   PREFETCH window: disabled
><7>pci 0000:00:0e.0: setting latency timer to 64
><6>bus: 00 index 0 io port: [0, ffff]
><6>bus: 00 index 1 mmio: [0, ffffffffffffffff]
><6>bus: 01 index 0 mmio: [0, 0]
><6>bus: 01 index 1 mmio: [fa900000, fe9fffff]
><6>bus: 01 index 2 mmio: [d2800000, f27fffff]
><6>bus: 01 index 3 mmio: [0, 0]
><6>bus: 02 index 0 io port: [c000, cfff]
><6>bus: 02 index 1 mmio: [fea00000, feafffff]
><6>bus: 02 index 2 mmio: [0, 0]
><6>bus: 02 index 3 mmio: [0, 0]
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
><6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 262144 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 5893k freed
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1231779076.601:1): initialized
><6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>msgmni has been set to 1002
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>pci 0000:01:00.0: Boot video device
><6>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000900000, using 10240k, total 262144k
><6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...
><6>bootsplash: silentjpeg size 113709 bytes
><6>bootsplash: ...found (1280x1024, 43709 bytes, v3).
><4>Console: switching to colour frame buffer device 156x60
><6>fb0: VESA VGA frame buffer device
><7>hpet_resources: 0xfed00000 is busy
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.103
><6>Serial: 8250/16550 driver8 ports, IRQ sharing disabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
><6>TCP cubic registered
><4>registered taskstats version 1
><6>Freeing unused kernel memory: 1472k freed
><6>Write protecting the kernel read-only data: 5024k
><6>ACPI: No dock devices found.
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><7>sata_nv 0000:00:0a.0: version 3.5
><4>ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
><6>sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22
><7>sata_nv 0000:00:0a.0: setting latency timer to 64
><6>scsi0 : sata_nv
><6>scsi1 : sata_nv
><6>ata1: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xe000 irq 22
><6>ata2: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xe008 irq 22
><6>input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input1
><4>ata1: link is slow to respond, please be patient (ready=0)
><3>ata1: SRST failed (errno=-16)
><6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><4>ata1: link online but device misclassified, retrying
><6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
><6>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
><6>ata1.00: configured for UDMA/133
><6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01112, max UDMA7
><6>ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
><6>ata2.00: configured for UDMA/133
><4>isa bounce pool size: 16 pages
><5>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
><5>scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD502IJ  1AA0 PQ: 0 ANSI: 5
><4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
><6>vendor=10de device=00ed
><6>aic7xxx 0000:02:08.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
><6>scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
><6>        <Adaptec 2940 SCSI adapter>
><6>        aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
><6>
><5>scsi 2:0:3:0: CD-ROM            YAMAHA   CRW8824S         1.0a PQ: 0 ANSI: 2
><6>scsi target2:0:3: Beginning Domain Validation
><6>scsi target2:0:3: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
><6>scsi target2:0:3: Domain Validation skipping write tests
><6>scsi target2:0:3: Ending Domain Validation
><6>processor ACPI_CPU:00: registered as cooling_device0
><6>processor ACPI_CPU:01: registered as cooling_device1
><7>pata_amd 0000:00:08.0: version 0.3.10
><6>pata_amd 0000:00:08.0: power state changed by ACPI to D0
><7>pata_amd 0000:00:08.0: setting latency timer to 64
><6>scsi3 : pata_amd
><6>scsi4 : pata_amd
><6>ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
><6>ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
><6>ata3.00: ATA-7: SAMSUNG SP2514N, VF100-33, max UDMA/100
><6>ata3.00: 488397168 sectors, multi 16: LBA48 
><7>ata3: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc600c000) ACPI=0x3f01f (20:600:0x13)
><6>ata3.00: configured for UDMA/100
><6>ata4.00: ATAPI: _NEC DVD_RW ND-3540A, 1.04, max UDMA/33
><7>ata4: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc600c000) ACPI=0x701f (60:600:0x13)
><6>ata4.00: configured for UDMA/33
><5>scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG SP2514N  VF10 PQ: 0 ANSI: 5
><5>scsi 4:0:0:0: CD-ROM            _NEC     DVD_RW ND-3540A  1.04 PQ: 0 ANSI: 5
><6>Uniform Multi-Platform E-IDE driver
><6>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
><6>udevd version 128 started
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><5>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500GB/465GiB)
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><5>sd 0:0:0:0: [sda] Write Protect is off
><4>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
><6>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21
><7>ohci_hcd 0000:00:02.0: setting latency timer to 64
><6>ohci_hcd 0000:00:02.0: OHCI Host Controller
><6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
><6>ohci_hcd 0000:00:02.0: irq 21, io mem 0xfebff000
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><4>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
><5>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500GB/465GiB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda2
><5>sd 0:0:0:0: [sda] Attached SCSI disk
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 4 ports detected
><5>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500GB/465GiB)
><5>sd 1:0:0:0: [sdb] Write Protect is off
><7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500GB/465GiB)
><5>sd 1:0:0:0: [sdb] Write Protect is off
><7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: sdb1 sdb2
><5>sd 1:0:0:0: [sdb] Attached SCSI disk
><5>sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors: (250GB/232GiB)
><5>sd 3:0:0:0: [sdc] Write Protect is off
><7>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
><5>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors: (250GB/232GiB)
><5>sd 3:0:0:0: [sdc] Write Protect is off
><7>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
><5>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
><4> sdc7<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><4> sdc8<6>usb usb1: Product: OHCI Host Controller
><4> sdc9<6>usb usb1: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd
><6>usb usb1: SerialNumber: 0000:00:02.0
><4> sdc10ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20
><4> sdc11<6>ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 20 (level, low) -> IRQ 20
><4> sdc12<7>ohci_hcd 0000:00:02.1: setting latency timer to 64
><4> sdc13<6>ohci_hcd 0000:00:02.1: OHCI Host Controller
><4> sdc14 >
><6>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
><5>sd 3:0:0:0: [sdc] Attached SCSI disk
><6>ohci_hcd 0000:00:02.1: irq 20, io mem 0xfebfe000
><6>usb usb2: configuration #1 chosen from 1 choice
><6>usb 1-4: new full speed USB device using ohci_hcd and address 2
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 4 ports detected
><6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: OHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd
><6>usb usb2: SerialNumber: 0000:00:02.1
><4>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
><6>usb 1-4: configuration #1 chosen from 1 choice
><6>usb 1-4: New USB device found, idVendor=0424, idProduct=20fc
><6>usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 1-4: Product: USB 2 Flash Media Device
><6>usb 1-4: Manufacturer: Generic
><6>usb 1-4: SerialNumber: 040730700021
><6>ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
><7>ehci_hcd 0000:00:02.2: setting latency timer to 64
><6>ehci_hcd 0000:00:02.2: EHCI Host Controller
><6>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
><6>ehci_hcd 0000:00:02.2: debug port 1
><7>ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
><6>ehci_hcd 0000:00:02.2: irq 22, io mem 0xfebfdc00
><6>usb 2-4: new full speed USB device using ohci_hcd and address 2
><6>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 8 ports detected
><3>hub 2-0:1.0: unable to enumerate USB device on port 4
><6>usb 1-4: USB disconnect, address 2
><6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: EHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.27.7-9-default ehci_hcd
><6>usb usb3: SerialNumber: 0000:00:02.2
><6>usb 3-7: new high speed USB device using ehci_hcd and address 2
><6>PM: Starting manual resume from disk
><6>usb 3-7: configuration #1 chosen from 1 choice
><6>usb 3-7: New USB device found, idVendor=0424, idProduct=20fc
><6>usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 3-7: Product: USB 2 Flash Media Device
><6>usb 3-7: Manufacturer: Generic
><6>usb 3-7: SerialNumber: 040730700021
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>usb 2-4: new full speed USB device using ohci_hcd and address 3
><6>usb 2-4: configuration #1 chosen from 1 choice
><6>usb 2-4: New USB device found, idVendor=0d8c, idProduct=0201
><6>usb 2-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
><6>usb 2-4: Product: PnP Audio Device        
><6>udevd version 128 started
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>sd 1:0:0:0: Attached scsi generic sg1 type 0
><5>scsi 2:0:3:0: Attached scsi generic sg2 type 5
><5>sd 3:0:0:0: Attached scsi generic sg3 type 0
><5>scsi 4:0:0:0: Attached scsi generic sg4 type 5
><6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>ACPI: Power Button (FF) [PWRF]
><6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
><6>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
><6>ACPI: Power Button (CM) [PWRB]
><4>ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
><6>forcedeth 0000:00:05.0: PCI INT A -> Link[LKLN] -> GSI 21 (level, low) -> IRQ 21
><7>forcedeth 0000:00:05.0: setting latency timer to 64
><7>nv_probe: set workaround bit for reversed mac addr
><6>Floppy drive(s): fd0 is 1.44M
><4>sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 2:0:3:0: Attached scsi CD-ROM sr0
><6>input: PC Speaker as /devices/platform/pcspkr/input/input4
><6>FDC 0 is a post-1991 82077
><4>sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
><7>sr 4:0:0:0: Attached scsi CD-ROM sr1
><6>Initializing USB Mass Storage driver...
><6>scsi5 : SCSI emulation for USB Mass Storage devices
><6>usbcore: registered new interface driver usb-storage
><6>USB Mass Storage support registered.
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>parport_pc 00:06: reported by Plug and Play ACPI
><6>parport0: PC-style at 0x378, irq 7 [PCSPP]
><6>forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:13:8f:de:03:75
><6>forcedeth 0000:00:05.0: csum timirq lnktim desc-v2
><6>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
><6>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
><6>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
><6>rtc0: alarms up to one year, y3k, hpet irqs
><6>ppdev: user-space parallel port driver
><6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
><3>8139cp 0000:02:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
><3>8139cp 0000:02:07.0: Try the "8139too" driver instead.
><6>8139too Fast Ethernet driver 0.9.28
><4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
><6>vendor=10de device=00ed
><4>ALSA sound/usb/usbaudio.c:1303: current rate 30464 is different from the runtime rate 96000
><6>8139too 0000:02:07.0: PCI INT A -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18
><6>eth1: RealTek RTL8139 at 0xffffc200008d2c00, 00:e0:4c:03:05:82, IRQ 18
><7>eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
><6>Linux video capture interface: v2.00
><6>usbcore: registered new interface driver snd-usb-audio
><4>saa7146: register extension 'dvb'.
><4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
><6>vendor=10de device=00ed
><6>dvb 0000:02:09.0: PCI INT A -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17
><4>saa7146: found saa7146 @ mem ffffc200008ca800 (revision 1, irq 17) (0x13c2,0x0003).
><6>firmware: requesting dvb-ttpci-01.fw
><5>scsi 5:0:0:0: Direct-Access     Generic  USB 2 HS-CF      1.95 PQ: 0 ANSI: 0
><5>sd 5:0:0:0: [sdd] Attached SCSI removable disk
><5>sd 5:0:0:0: Attached scsi generic sg5 type 0
><5>scsi 5:0:0:1: Direct-Access     Generic  USB 2 HS-MS      1.95 PQ: 0 ANSI: 0
><5>sd 5:0:0:1: [sde] Attached SCSI removable disk
><5>sd 5:0:0:1: Attached scsi generic sg6 type 0
><6>DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X)
><5>scsi 5:0:0:2: Direct-Access     Generic  USB 2 HS-SM      1.95 PQ: 0 ANSI: 0
><5>sd 5:0:0:2: [sdf] Attached SCSI removable disk
><5>sd 5:0:0:2: Attached scsi generic sg7 type 0
><5>scsi 5:0:0:3: Direct-Access     Generic  USB 2 HS-SD/MMC  1.95 PQ: 0 ANSI: 0
><4>adapter has MAC addr = 00:d0:5c:20:8f:a9
><5>sd 5:0:0:3: [sdg] Attached SCSI removable disk
><5>sd 5:0:0:3: Attached scsi generic sg8 type 0
><7>usb-storage: device scan complete
><4>dvb-ttpci: gpioirq unknown type=0 len=0
><4>dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
><4>dvb-ttpci: firmware @ card 0 supports CI link layer interface
><4>dvb-ttpci: adac type set to 0 @ card 0
><4>saa7146_vv: saa7146 (0): registered device video0 [v4l2]
><4>saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
><4>DVB: registering frontend 0 (ST STV0299 DVB-S)...
><6>input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:0e.0/0000:02:09.0/input/input5
><6>dvb-ttpci: found av7110-0.
><6>Adding 1959888k swap on /dev/sdc5.  Priority:-1 extents:1 across:1959888k
><6>device-mapper: uevent: version 1.0.3
><6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
><6>loop: module loaded
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda2, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><5>REISERFS (device sdc9): found reiserfs format "3.6" with standard journal
><5>REISERFS (device sdc9): using ordered data mode
><5>REISERFS (device sdc9): journal params: device sdc9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device sdc9): checking transaction log (sdc9)
><5>REISERFS (device sdc9): Using r5 hash to sort names
><5>REISERFS (device sdc11): found reiserfs format "3.6" with standard journal
><5>REISERFS (device sdc11): using ordered data mode
><5>REISERFS (device sdc11): journal params: device sdc11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device sdc11): checking transaction log (sdc11)
><5>REISERFS (device sdc11): Using r5 hash to sort names
><5>REISERFS (device sdc8): found reiserfs format "3.6" with standard journal
><5>REISERFS (device sdc8): using ordered data mode
><5>REISERFS (device sdc8): journal params: device sdc8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device sdc8): checking transaction log (sdc8)
><5>REISERFS (device sdc8): Using r5 hash to sort names
><5>REISERFS (device sdc10): found reiserfs format "3.6" with standard journal
><5>REISERFS (device sdc10): using ordered data mode
><5>REISERFS (device sdc10): journal params: device sdc10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device sdc10): checking transaction log (sdc10)
><5>REISERFS (device sdc10): Using r5 hash to sort names
><5>REISERFS (device sdc12): found reiserfs format "3.6" with standard journal
><5>REISERFS (device sdc12): using ordered data mode
><5>REISERFS (device sdc12): journal params: device sdc12, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device sdc12): checking transaction log (sdc12)
><5>REISERFS (device sdc12): Using r5 hash to sort names
><5>REISERFS (device sdc13): found reiserfs format "3.6" with standard journal
><5>REISERFS (device sdc13): using ordered data mode
><5>REISERFS (device sdc13): journal params: device sdc13, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device sdc13): checking transaction log (sdc13)
><5>REISERFS (device sdc13): Using r5 hash to sort names
><5>REISERFS (device sdc14): found reiserfs format "3.6" with standard journal
><5>REISERFS (device sdc14): using ordered data mode
><5>REISERFS (device sdc14): journal params: device sdc14, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device sdc14): checking transaction log (sdc14)
><5>REISERFS (device sdc14): Using r5 hash to sort names
><3>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
><3>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
><4>fuse init (API version 7.9)
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Mon Jan 12 16:51:37 2009
>
>Trying manual resume from /dev/disk/by-id/ata-SAMSUNG_SP2514N_S08BJ1FYB10301-part5
>Invoking userspace resume from /dev/disk/by-id/ata-SAMSUNG_SP2514N_S08BJ1FYB10301-part5
>resume: libgcrypt version: 1.4.1
>Trying manual resume from /dev/disk/by-id/ata-SAMSUNG_SP2514N_S08BJ1FYB10301-part5
>Invoking in-kernel resume from /dev/disk/by-id/ata-SAMSUNG_SP2514N_S08BJ1FYB10301-part5
>Waiting for device /dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 to appear:  ok
>fsck 1.41.1 (01-Sep-2008)
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 
>/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1: clean, 372907/2624496 files, 3531333/10486428 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Mon Jan 12 17:51:39 2009
>
>done
>Starting udevd: done
>Loading drivers, configuring devices: done
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>doneSetting up the hardware clockdone
>Activating device mapper...
>done
>Checking file systems...
>fsck 1.41.1 (01-Sep-2008)
>/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part2: recovering journal
>/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part2: clean, 168854/2621440 files, 2937816/10484412 blocks
>Reiserfs super block in block 16 on 0x829 of format 3.6 with standard journal
>Blocks (total/free): 9767504/2330592 by 4096 bytes
>Filesystem is clean
>/dev/disk/by-id/ata-SAMSUNG_SP2514N_S08BJ1FYB10301-part3: clean, 103/60480 files, 61629/240972 blocks
>Reiserfs super block in block 16 on 0x82b of format 3.6 with standard journal
>Blocks (total/free): 3664816/1326014 by 4096 bytes
>Filesystem is clean
>Reiserfs super block in block 16 on 0x828 of format 3.6 with standard journal
>Blocks (total/free): 8363824/1109038 by 4096 bytes
>Filesystem is clean
>Reiserfs super block in block 16 on 0x82a of format 3.6 with standard journal
>Blocks (total/free): 10988448/875012 by 4096 bytes
>Filesystem is clean
>Reiserfs super block in block 16 on 0x82c of format 3.6 with standard journal
>Blocks (total/free): 8546560/1724832 by 4096 bytes
>Filesystem is clean
>Reiserfs super block in block 16 on 0x82d of format 3.6 with standard journal
>Blocks (total/free): 4885760/2170343 by 4096 bytes
>Filesystem is clean
>Reiserfs super block in block 16 on 0x82e of format 3.6 with standard journal
>Blocks (total/free): 4885760/1336436 by 4096 bytes
>Filesystem is clean
>donedone
>Mounting local file systems...
>/proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda2 on /home type ext3 (rw,acl,user_xattr)
>/dev/sdc9 on /oldroot type reiserfs (rw,acl,user_xattr)
>/dev/sdc3 on /oldroot/boot type ext2 (rw,acl,user_xattr)
>/dev/sdc11 on /oldroot/home type reiserfs (rw,acl,user_xattr)
>/dev/sdc8 on /root93 type reiserfs (rw,acl,user_xattr)
>/dev/sdc10 on /suse10.1 type reiserfs (rw,acl,user_xattr)
>/dev/sdc12 on /tmp2 type reiserfs (rw,acl,user_xattr)
>/dev/sdc13 on /data type reiserfs (rw,acl,user_xattr)
>/dev/sdc14 on /video type reiserfs (rw,acl,user_xattr)
>/dev/sdc1 on /windows/C type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=utf8)
>/dev/sdc2 on /windows/D type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=utf8)
>doneLoading fuse module done
>Mounting fuse control filesystemdone
>Setting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>net.ipv4.conf.default.promote_secondaries = 1
>net.ipv4.conf.all.promote_secondaries = 1
>done
>Activating remaining swap-devices in /etc/fstab...
>done<notice>killproc: kill(705,29)
>Creating /var/log/boot.msg
>doneEnabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>Setting up hostname 'linux-bcpx'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>              IP address: 127.0.0.2/8   
>done
>Mounting securityfs on /sys/kernel/security done
>Loading AppArmor profiles done
>System Boot Control: The system has been set up
>Skipped features: boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(705,3)
>
>INIT: Entering runlevel: 5
>
>
>
>Boot logging started on /dev/tty1(/dev/console) at Mon Jan 12 17:51:53 2009
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 _=/sbin/startproc DAEMON=/sbin/acpid ]
>acpid: starting up
>
>
>Initializing random number generatordone
>Starting acpid done
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
>acpid: 2 rules loaded
>
>
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>Starting D-Bus daemondone
>Starting Firewall Initialization (phase 1 of 2) done
>Loading CPUFreq modulesdone
>Starting HAL daemondone
>Setting up (localfs) network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>              IP address: 127.0.0.2/8   
>done    eth0      device: nVidia Corporation CK8S Ethernet Controller (rev a2)
>    eth0      IP address: 192.168.0.1/24   
><notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=en_GB.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 _=/sbin/startproc DAEMON=/usr/bin/kdm ]
>done    eth1      device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
>    eth1      IP address: 10.222.222.31/24   
>doneSetting up service (localfs) network  .  .  .  .  .  .  .  .  .  .done
>Starting service kdmdone
>Starting rpcbind <notice>startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 _=/sbin/startproc DAEMON=/sbin/rpcbind ]
>done
>Not starting NFS client services - no NFS found in /etc/fstab:unused
>Loading console font lat9w-16.psfu  -m trivial G0:loadable
>doneLoading keymap i386/azerty/be-latin1.map.gz
>done<notice>checkproc: /usr/bin/kdm 3089
>Loading compose table latin1.adddone
>Start Unicode mode
>done<notice>checkproc: /usr/bin/kdm 3089
><notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 _=/sbin/startproc DAEMON=/sbin/auditd ]
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
>Starting java.binfmt_misc done
><notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
>Starting auditd done
>Starting cupsddone
>Starting Avahi daemon done
>Starting irqbalance done
>Setting up (remotefs) network interfaces:
>Setting up service (remotefs) network  .  .  .  .  .  .  .  .  .  .done
>Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>done
>Starting network time protocol daemon (NTPD)<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -g -u ntp:ntp -c /etc/ntp.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
>done
>Starting mail service (Postfix)done
>Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>done
>Starting smartd <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1EP800582-part1 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Starting SSH daemondone
>done
>Starting Firewall Initialization (phase 2 of 2) done
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: nfs
><notice>killproc: kill(2322,3)

Actions: View

Attachments on bug 464998: 264232 | 264620 | 264898 | 265240