Attachment 265332 Details for Bug 436895

dmesg output with acpi_root_table=rsdt acpi_debug_level=0x1f processor.max_cstate=1

dmesg_rsdt.txt (text/plain), 33.32 KB, created by Tobias Lippert on 2009-01-15 13:41:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tobias Lippert

Created: 2009-01-15 13:41:47 UTC

Size: 33.32 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27.10-HEAD_20090113154643_6d77fbf8-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-01-13 16:46:43 +0100
>Command line: root=/dev/disk/by-id/ata-FUJITSU_MHZ2320BH_G2_K62WT8927PF2-part6 resume=/dev/disk/by-id/ata-FUJITSU_MHZ2320BH_G2_K62WT8927PF2-part5 processor.max_cstate=1 s acpi_root_table=rsdt acpi_debug_level=0x1f
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
> BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
> BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
> BIOS-e820: 00000000bf8a7000 - 00000000bf9b4000 (usable)
> BIOS-e820: 00000000bf9b4000 - 00000000bfa0f000 (reserved)
> BIOS-e820: 00000000bfa0f000 - 00000000bfb07000 (usable)
> BIOS-e820: 00000000bfb07000 - 00000000bfd0f000 (reserved)
> BIOS-e820: 00000000bfd0f000 - 00000000bfd18000 (usable)
> BIOS-e820: 00000000bfd18000 - 00000000bfd1f000 (reserved)
> BIOS-e820: 00000000bfd1f000 - 00000000bfd65000 (usable)
> BIOS-e820: 00000000bfd65000 - 00000000bfd9f000 (ACPI NVS)
> BIOS-e820: 00000000bfd9f000 - 00000000bfe00000 (ACPI data)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
>DMI present.
>Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
>last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>last_pfn = 0xbfd65 max_arch_pfn = 0x3ffffffff
>init_memory_mapping
> 0000000000 - 00bfc00000 page 2M
> 00bfc00000 - 00bfd65000 page 4k
>kernel direct mapping tables up to bfd65000 @ 10000-15000
>last_map_addr: bfd65000 end: bfd65000
>init_memory_mapping
> 0100000000 - 0140000000 page 2M
>kernel direct mapping tables up to 140000000 @ 13000-19000
>last_map_addr: 140000000 end: 140000000
>RAMDISK: 37a7c000 - 37feff04
>Using RSDT as ACPI root table
>ACPI: RSDP 000F72E0, 0024 (r2 PTLTD )
>ACPI: RSDT BFDF85FB, 0048 (r1 SECCSD FTNGROVE  6040000  LTP        0)
>ACPI: FACP BFDE4000, 0074 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>ACPI: DSDT BFDE9000, 6533 (r2 Intel  CANTIGA   6040000 INTL 20050624)
>ACPI: FACS BFD9EFC0, 0040
>ACPI: HPET BFDFED86, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>ACPI: MCFG BFDFEDBE, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>ACPI: APIC BFDFEDFA, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: BOOT BFDFEE62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: SLIC BFDFEE8A, 0176 (r1 SECCSD LH43STAR  6040000  LTP        0)
>ACPI: SSDT BFDE7000, 05F9 (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: SSDT BFDE6000, 0259 (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
>ACPI: SSDT BFDE5000, 020F (r1  PmRef    ApTst     3000 INTL 20050624)
>ACPI: DMI detected: Samsung
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000140000000
>Bootmem setup node 0 0000000000000000-0000000140000000
>  NODE_DATA [0000000000014000 - 000000000002bfff]
>  bootmap [000000000002c000 -  0000000000053fff] pages 28
>(7 early reservations) ==> bootmem [0000000000 - 0140000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000c01838]    TEXT DATA BSS ==> [0000200000 - 0000c01838]
>  #3 [0037a7c000 - 0037feff04]          RAMDISK ==> [0037a7c000 - 0037feff04]
>  #4 [000009e400 - 0000100000]    BIOS reserved ==> [000009e400 - 0000100000]
>  #5 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
>  #6 [0000013000 - 0000014000]          PGTABLE ==> [0000013000 - 0000014000]
>found SMP MP-table at [ffff8800000f7380] 000f7380
> [ffffe20000000000-ffffe20004ffffff] PMD -> [ffff880028200000-ffff88002c1fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00140000
>Movable zone start PFN for each node
>early_node_map[7] active PFN ranges
>    0: 0x00000010 -> 0x0000009e
>    0: 0x00000100 -> 0x000bf8a1
>    0: 0x000bf8a7 -> 0x000bf9b4
>    0: 0x000bfa0f -> 0x000bfb07
>    0: 0x000bfd0f -> 0x000bfd18
>    0: 0x000bfd1f -> 0x000bfd65
>    0: 0x00100000 -> 0x00140000
>On node 0 totalpages: 1047171
>  DMA zone: 1251 pages, LIFO batch:0
>  DMA32 zone: 764725 pages, LIFO batch:31
>  Normal zone: 258048 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
>PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
>PM: Registered nosave memory: 00000000bf9b4000 - 00000000bfa0f000
>PM: Registered nosave memory: 00000000bfb07000 - 00000000bfd0f000
>PM: Registered nosave memory: 00000000bfd18000 - 00000000bfd1f000
>PM: Registered nosave memory: 00000000bfd65000 - 00000000bfd9f000
>PM: Registered nosave memory: 00000000bfd9f000 - 00000000bfe00000
>PM: Registered nosave memory: 00000000bfe00000 - 0000000100000000
>Allocating PCI resources starting at c0000000 (gap: bfe00000:40200000)
>PERCPU: Allocating 62752 bytes of per cpu data
>NR_CPUS: 512, nr_cpu_ids: 2, nr_node_ids 1
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1024024
>Policy zone: Normal
>Kernel command line: root=/dev/disk/by-id/ata-FUJITSU_MHZ2320BH_G2_K62WT8927PF2-part6 resume=/dev/disk/by-id/ata-FUJITSU_MHZ2320BH_G2_K62WT8927PF2-part5 processor.max_cstate=1 s acpi_root_table=rsdt acpi_debug_level=0x1f
>Unknown boot option `processor.max_cstate=1': ignoring
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PIT calibration value
>Detected 1994.957 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>No AGP bridge found
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x20000000 - 0x24000000
>Memory: 4040692k/5242880k available (2772k kernel code, 147992k reserved, 3249k data, 860k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.91 BogoMIPS (lpj=7979828)
>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
>Security Framework initialized
>AppArmor: AppArmor initialized
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20080609
>ACPI: Checking initramfs for custom DSDT
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 1040 Objects with 66 Devices 230 Methods 39 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 27 Objects with 0 Devices 16 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0004) - 12 Objects with 0 Devices 9 Methods 0 Regions
> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T5750  @ 2.00GHz stepping 0d
>Using local APIC timer interrupts.
>APIC timer calibration result 10390403
>Detected 10.390 MHz APIC timer.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3989.91 BogoMIPS (lpj=7979835)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     T5750  @ 2.00GHz stepping 0d
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (7979.83 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>net_namespace: 1936 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>perfmon: version 2.82
>perfmon: CPU hotplug support enabled
>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 3F [_GPE] 8 regs on int 0x9
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:......................................................................................................................
>Initialized 38/39 Regions 6/6 Fields 29/29 Buffers 45/45 Packages (1095 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored via DMI
>.
>Executed 1 _INI methods requiring 0 _STA executions (examined 74 objects)
>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 9 Runtime GPEs in this block
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>PCI: 0000:00:1a.0 reg 20 io port: [1800, 181f]
>PCI: 0000:00:1a.1 reg 20 io port: [1820, 183f]
>PCI: 0000:00:1a.2 reg 20 io port: [1840, 185f]
>PCI: 0000:00:1a.7 reg 10 32bit mmio: [f6204800, f6204bff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>PCI: 0000:00:1b.0 reg 10 64bit mmio: [f6200000, f6203fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>PCI: 0000:00:1d.0 reg 20 io port: [1860, 187f]
>PCI: 0000:00:1d.1 reg 20 io port: [1880, 189f]
>PCI: 0000:00:1d.2 reg 20 io port: [18a0, 18bf]
>PCI: 0000:00:1d.7 reg 10 32bit mmio: [f6204c00, f6204fff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>PCI: 0000:00:1f.2 reg 10 io port: [18f0, 18f7]
>PCI: 0000:00:1f.2 reg 14 io port: [18e4, 18e7]
>PCI: 0000:00:1f.2 reg 18 io port: [18e8, 18ef]
>PCI: 0000:00:1f.2 reg 1c io port: [18e0, 18e3]
>PCI: 0000:00:1f.2 reg 20 io port: [18c0, 18df]
>PCI: 0000:00:1f.2 reg 24 32bit mmio: [f6204000, f62047ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>PCI: 0000:00:1f.3 reg 10 64bit mmio: [0, ff]
>PCI: 0000:00:1f.3 reg 20 io port: [1c00, 1c1f]
>PCI: 0000:01:00.0 reg 10 32bit mmio: [ce000000, ceffffff]
>PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
>PCI: 0000:01:00.0 reg 1c 64bit mmio: [cc000000, cdffffff]
>PCI: 0000:01:00.0 reg 24 io port: [2000, 207f]
>PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
>PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
>PCI: bridge 0000:00:01.0 32bit mmio: [cc000000, ceffffff]
>PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
>PCI: 0000:02:00.0 reg 10 64bit mmio: [f3000000, f300ffff]
>pci 0000:02:00.0: PME# supported from D3hot
>pci 0000:02:00.0: PME# disabled
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:1c.0 io port: [3000, 3fff]
>PCI: bridge 0000:00:1c.0 32bit mmio: [f3000000, f3ffffff]
>PCI: bridge 0000:00:1c.0 64bit mmio pref: [f0000000, f0ffffff]
>PCI: bridge 0000:00:1c.2 io port: [4000, 4fff]
>PCI: bridge 0000:00:1c.2 32bit mmio: [f4000000, f4ffffff]
>PCI: bridge 0000:00:1c.2 64bit mmio pref: [f1000000, f1ffffff]
>PCI: 0000:06:00.0 reg 10 64bit mmio: [f5000000, f5003fff]
>PCI: 0000:06:00.0 reg 18 io port: [5000, 50ff]
>PCI: 0000:06:00.0 reg 30 32bit mmio: [0, 1ffff]
>pci 0000:06:00.0: supports D1
>pci 0000:06:00.0: supports D2
>pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:06:00.0: PME# disabled
>PCI: bridge 0000:00:1c.3 io port: [5000, 5fff]
>PCI: bridge 0000:00:1c.3 32bit mmio: [f5000000, f5ffffff]
>PCI: bridge 0000:00:1c.3 64bit mmio pref: [f2000000, f2ffffff]
>pci 0000:00:1e.0: transparent bridge
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
>ACPI: Power Resource [FN00] (off)
>ACPI: Power Resource [FN01] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:05: io resource (0x5000-0x500f) overlaps 0000:00:1c.3 BAR 7 (0x5000-0x5fff), disabling
>pnp 00:05: io resource (0x5000-0x500f) overlaps 0000:06:00.0 BAR 2 (0x5000-0x50ff), disabling
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>AppArmor: AppArmor Filesystem Enabled
>system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
>system 00:05: ioport range 0x680-0x69f has been reserved
>system 00:05: ioport range 0x480-0x48f has been reserved
>system 00:05: ioport range 0xffff-0xffff has been reserved
>system 00:05: ioport range 0xffff-0xffff has been reserved
>system 00:05: ioport range 0x400-0x47f has been reserved
>system 00:05: ioport range 0x480-0x48f has been reserved
>system 00:05: ioport range 0x1180-0x11ff has been reserved
>system 00:05: ioport range 0x164e-0x164f has been reserved
>system 00:05: ioport range 0xfe00-0xfe00 has been reserved
>system 00:06: ioport range 0x6a0-0x6af has been reserved
>system 00:06: ioport range 0x6b0-0x6ff has been reserved
>system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:0a: iomem range 0xfed10000-0xfed13fff has been reserved
>system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
>system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
>pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0x2000-0x2fff
>pci 0000:00:01.0:   MEM window: 0xcc000000-0xceffffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
>pci 0000:00:1c.0:   MEM window: 0xf3000000-0xf3ffffff
>pci 0000:00:1c.0:   PREFETCH window: 0x000000f0000000-0x000000f0ffffff
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
>pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
>pci 0000:00:1c.2:   MEM window: 0xf4000000-0xf4ffffff
>pci 0000:00:1c.2:   PREFETCH window: 0x000000f1000000-0x000000f1ffffff
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
>pci 0000:00:1c.3:   IO window: 0x5000-0x5fff
>pci 0000:00:1c.3:   MEM window: 0xf5000000-0xf5ffffff
>pci 0000:00:1c.3:   PREFETCH window: 0x000000f2000000-0x000000f2ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: disabled
>Switched to high resolution mode on CPU 1
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>Switched to high resolution mode on CPU 0
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [2000, 2fff]
>bus: 01 index 1 mmio: [cc000000, ceffffff]
>bus: 01 index 2 mmio: [d0000000, dfffffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 02 index 0 io port: [3000, 3fff]
>bus: 02 index 1 mmio: [f3000000, f3ffffff]
>bus: 02 index 2 mmio: [f0000000, f0ffffff]
>bus: 02 index 3 mmio: [0, 0]
>bus: 04 index 0 io port: [4000, 4fff]
>bus: 04 index 1 mmio: [f4000000, f4ffffff]
>bus: 04 index 2 mmio: [f1000000, f1ffffff]
>bus: 04 index 3 mmio: [0, 0]
>bus: 06 index 0 io port: [5000, 5fff]
>bus: 06 index 1 mmio: [f5000000, f5ffffff]
>bus: 06 index 2 mmio: [f2000000, f2ffffff]
>bus: 06 index 3 mmio: [0, 0]
>bus: 08 index 0 mmio: [0, 0]
>bus: 08 index 1 mmio: [0, 0]
>bus: 08 index 2 mmio: [0, 0]
>bus: 08 index 3 io port: [0, ffff]
>bus: 08 index 4 mmio: [0, ffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Unpacking initramfs... done
>Freeing initrd memory: 5583k freed
>Simple Boot Flag at 0x37 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1232029951.761:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 1975
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>perfmon: added sampling format default
>pci 0000:01:00.0: Boot video device
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:01.0: found MSI capability
>pci_express 0000:00:01.0:pcie00: allocate port service
>pci_express 0000:00:01.0:pcie02: allocate port service
>pci_express 0000:00:01.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: found MSI capability
>pci_express 0000:00:1c.2:pcie00: allocate port service
>pci_express 0000:00:1c.2:pcie02: allocate port service
>pci_express 0000:00:1c.2:pcie03: allocate port service
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pcieport-driver 0000:00:1c.3: found MSI capability
>pci_express 0000:00:1c.3:pcie00: allocate port service
>pci_express 0000:00:1c.3:pcie02: allocate port service
>pci_express 0000:00:1c.3:pcie03: allocate port service
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver8 ports, IRQ sharing disabled
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>TCP cubic registered
>registered taskstats version 1
>Freeing unused kernel memory: 860k freed
>Write protecting the kernel read-only data: 5088k
>ACPI: No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204100 irq 4347
>ata2: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204180 irq 4347
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204300 irq 4347
>ata6: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204380 irq 4347
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: FUJITSU MHZ2320BH G2, 00000009, max UDMA/100
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC03, max UDMA/100, ATAPI AN
>ata2.00: applying bridge limits
>ata2.00: configured for UDMA/100
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2320B 0000 PQ: 0 ANSI: 5
>scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633A  SC03 PQ: 0 ANSI: 5
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>udevd version 128 started
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320GB/298GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320GB/298GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27.10-HEAD_20090113154643_6d77fbf8-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27.10-HEAD_20090113154643_6d77fbf8-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27.10-HEAD_20090113154643_6d77fbf8-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.2
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf6204800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: EHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27.10-HEAD_20090113154643_6d77fbf8-default ehci_hcd
>usb usb4: SerialNumber: 0000:00:1a.7
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-1: device not accepting address 2, error -71
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27.10-HEAD_20090113154643_6d77fbf8-default uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>hub 1-0:1.0: unable to enumerate USB device on port 1
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.27.10-HEAD_20090113154643_6d77fbf8-default uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.27.10-HEAD_20090113154643_6d77fbf8-default uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6204c00
>usb 4-3: new high speed USB device using ehci_hcd and address 3
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 6 ports detected
>usb 4-3: configuration #1 chosen from 1 choice
>usb 4-3: New USB device found, idVendor=0ac8, idProduct=c302
>usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-3: Product: Vega USB 2.0 Camera.
>usb 4-3: Manufacturer: Vimicro Corp.
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: EHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.27.10-HEAD_20090113154643_6d77fbf8-default ehci_hcd
>usb usb8: SerialNumber: 0000:00:1d.7
>PM: Starting manual resume from disk
>usb 1-1: new low speed USB device using uhci_hcd and address 4
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: New USB device found, idVendor=045e, idProduct=00db
>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1: Product: Natural® Ergonomic Keyboard 4000
>usb 1-1: Manufacturer: Microsoft
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usbcore: registered new interface driver hiddev
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input2
>input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1a.0-1
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.1/input/input3
>input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1a.0-1
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>usb 5-1: new low speed USB device using uhci_hcd and address 2
>usb 5-1: configuration #1 chosen from 1 choice
>input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input4
>input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1
>usb 5-1: New USB device found, idVendor=046d, idProduct=c016
>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-1: Product: Optical USB Mouse
>usb 5-1: Manufacturer: Logitech
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, hpet irqs
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: SSDT BFD1AC20, 0265 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 0089) - 6 Objects with 0 Devices 3 Methods 0 Regions
>ACPI: SSDT BFD18020, 0C78 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 008A) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: processor limited to max C-state 1
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT BFD19CA0, 01CF (r1  PmRef    ApIst     3000 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 0094) - 12 Objects with 0 Devices 12 Methods 0 Regions
>ACPI: SSDT BFD19F20, 008D (r1  PmRef    ApCst     3000 INTL 20050624)
>Parsing all Control Methods:
>Table [SSDT](id 0096) - 3 Objects with 0 Devices 3 Methods 0 Regions
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>processor ACPI_CPU:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Transitioning device [FAN0] to D3
>fan PNP0C0B:00: registered as cooling_device2
>ACPI: Fan [FAN0] (off)
>ACPI: Transitioning device [FAN1] to D3
>fan PNP0C0B:01: registered as cooling_device3
>ACPI: Fan [FAN1] (off)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (46 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [TZ01] (46 C)

Actions: View

Attachments on bug 436895: 246516 | 258115 | 258626 | 264938 | 264967 | 265276 | 265332