Attachment 265774 Details for Bug 463247

dmesg output after scan (all included as I don't know what's not relevant)

dmesg (text/plain), 41.42 KB, created by Forgotten User xkLf2DaQYV on 2009-01-16 20:22:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Forgotten User xkLf2DaQYV

Created: 2009-01-16 20:22:52 UTC

Size: 41.42 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27.7-9-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
>Command line: root=/dev/disk/by-id/raid-pdc_cbegijeiii-part1 resume=/dev/disk/by-id/raid-pdc_cbegijeiii-part2 splash=silent vga=0x31a
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bffd0000 (usable)
> BIOS-e820: 00000000bffd0000 - 00000000bffde000 (ACPI data)
> BIOS-e820: 00000000bffde000 - 00000000c0000000 (ACPI NVS)
> BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>DMI present.
>last_pfn = 0xbffd0 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
> 0000000000 - 00bfe00000 page 2M
> 00bfe00000 - 00bffd0000 page 4k
>kernel direct mapping tables up to bffd0000 @ 8000-d000
>last_map_addr: bffd0000 end: bffd0000
>RAMDISK: 37a0b000 - 37fefba5
>ACPI: RSDP 000F98B0, 0014 (r0 ACPIAM)
>ACPI: RSDT BFFD0000, 003C (r1 MSIISM OEMRSDT   4000807 MSFT       97)
>ACPI: FACP BFFD0200, 0084 (r2 MSIISM OEMFACP   4000807 MSFT       97)
>ACPI: DSDT BFFD0440, 5045 (r1  1ADGH 1ADGH013       13 INTL 20051117)
>ACPI: FACS BFFDE000, 0040
>ACPI: APIC BFFD0390, 0070 (r1 MSIISM OEMAPIC   4000807 MSFT       97)
>ACPI: MCFG BFFD0400, 003C (r1 MSIISM OEMMCFG   4000807 MSFT       97)
>ACPI: OEMB BFFDE040, 0061 (r1 MSIISM AMI_OEM   4000807 MSFT       97)
>ACPI: HPET BFFD5490, 0038 (r1 MSIISM OEMHPET0  4000807 MSFT       97)
>ACPI: SSDT BFFD54D0, 0248 (r1 A M I  POWERNOW        1 AMD         1)
>ACPI: Local APIC address 0xfee00000
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-00000000bffd0000
>Bootmem setup node 0 0000000000000000-00000000bffd0000
>  NODE_DATA [000000000000b000 - 0000000000022fff]
>  bootmap [0000000000023000 -  000000000003afff] pages 18
>(6 early reservations) ==> bootmem [0000000000 - 00bffd0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000bf27b8]    TEXT DATA BSS ==> [0000200000 - 0000bf27b8]
>  #3 [0037a0b000 - 0037fefba5]          RAMDISK ==> [0037a0b000 - 0037fefba5]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
>found SMP MP-table at [ffff8800000ff780] 000ff780
> [ffffe20000000000-ffffe20002ffffff] PMD -> [ffff880001200000-ffff8800041fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x000bffd0
>On node 0 totalpages: 786287
>  DMA zone: 1285 pages, LIFO batch:0
>  DMA32 zone: 770064 pages, LIFO batch:31
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x2008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>ACPI: HPET id: 0x10de8201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
>PERCPU: Allocating 62240 bytes of per cpu data
>NR_CPUS: 512, nr_cpu_ids: 2, nr_node_ids 1
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 771349
>Policy zone: DMA32
>Kernel command line: root=/dev/disk/by-id/raid-pdc_cbegijeiii-part1 resume=/dev/disk/by-id/raid-pdc_cbegijeiii-part2 splash=silent vga=0x31a
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PIT calibration value
>Detected 2399.950 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 8028000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Memory: 3079344k/3145536k available (2731k kernel code, 65804k reserved, 2620k data, 1472k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.90 BogoMIPS (lpj=9599800)
>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
>Security Framework initialized
>SELinux:  Disabled at boot.
>AppArmor: AppArmor initialized
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>tseg: 0000000000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>using C1E aware idle routine
>ACPI: Core revision 20080609
>ACPI: Checking initramfs for custom DSDT
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 793 Objects with 80 Devices 259 Methods 16 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
>Using local APIC timer interrupts.
>APIC timer calibration result 12499791
>Detected 12.499 MHz APIC timer.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4800.01 BogoMIPS (lpj=9600029)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
>Brought up 2 CPUs
>Total of 2 processors activated (9599.91 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>net_namespace: 1936 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>node 0 link 0: io port [1000, ffffff]
>node 0 link 0: io port [2000, 2fff]
>TOM: 00000000c0000000 aka 3072M
>node 0 link 0: mmio [e0000000, efffffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [c0000000, fe0bffff]
>bus: [00,ff] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [c0000000, fcffffffff]
>bus: 00 index 2 mmio: [a0000, bffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 20 to 5F [_GPE] 8 regs on int 0x9
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:..........................................................................................................................
>Initialized 11/16 Regions 28/28 Fields 50/50 Buffers 33/34 Packages (810 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:
>Executed 0 _INI methods requiring 0 _STA executions (examined 84 objects)
>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 10 Wake, Enabled 0 Runtime GPEs in this block
>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: 0000:00:01.0 reg 10 io port: [2f00, 2f7f]
>PCI: 0000:00:01.1 reg 10 io port: [2900, 293f]
>PCI: 0000:00:01.1 reg 20 io port: [2d00, 2d3f]
>PCI: 0000:00:01.1 reg 24 io port: [2e00, 2e3f]
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>PCI: 0000:00:02.0 reg 10 32bit mmio: [f9efb000, f9efbfff]
>pci 0000:00:02.0: supports D1
>pci 0000:00:02.0: supports D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>PCI: 0000:00:02.1 reg 10 32bit mmio: [f9efac00, f9efacff]
>pci 0000:00:02.1: supports D1
>pci 0000:00:02.1: supports D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>PCI: 0000:00:04.0 reg 20 io port: [ffa0, ffaf]
>PCI: 0000:00:05.0 reg 10 io port: [d480, d487]
>PCI: 0000:00:05.0 reg 14 io port: [d400, d403]
>PCI: 0000:00:05.0 reg 18 io port: [d080, d087]
>PCI: 0000:00:05.0 reg 1c io port: [d000, d003]
>PCI: 0000:00:05.0 reg 20 io port: [cc00, cc0f]
>PCI: 0000:00:05.0 reg 24 32bit mmio: [f9ef9000, f9ef9fff]
>PCI: 0000:00:05.1 reg 10 io port: [c880, c887]
>PCI: 0000:00:05.1 reg 14 io port: [c800, c803]
>PCI: 0000:00:05.1 reg 18 io port: [c480, c487]
>PCI: 0000:00:05.1 reg 1c io port: [c400, c403]
>PCI: 0000:00:05.1 reg 20 io port: [c080, c08f]
>PCI: 0000:00:05.1 reg 24 32bit mmio: [f9ef8000, f9ef8fff]
>PCI: 0000:00:05.2 reg 10 io port: [c000, c007]
>PCI: 0000:00:05.2 reg 14 io port: [bc00, bc03]
>PCI: 0000:00:05.2 reg 18 io port: [b880, b887]
>PCI: 0000:00:05.2 reg 1c io port: [b800, b803]
>PCI: 0000:00:05.2 reg 20 io port: [b480, b48f]
>PCI: 0000:00:05.2 reg 24 32bit mmio: [f9ef7000, f9ef7fff]
>PCI: 0000:00:06.1 reg 10 32bit mmio: [f9ef0000, f9ef3fff]
>pci 0000:00:06.1: PME# supported from D3hot D3cold
>pci 0000:00:06.1: PME# disabled
>PCI: 0000:00:08.0 reg 10 32bit mmio: [f9ef6000, f9ef6fff]
>PCI: 0000:00:08.0 reg 14 io port: [b400, b407]
>PCI: 0000:00:08.0 reg 18 32bit mmio: [f9efa800, f9efa8ff]
>PCI: 0000:00:08.0 reg 1c 32bit mmio: [f9efa400, f9efa40f]
>pci 0000:00:08.0: supports D1
>pci 0000:00:08.0: supports D2
>pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:08.0: PME# disabled
>PCI: 0000:00:09.0 reg 10 32bit mmio: [f9ef5000, f9ef5fff]
>PCI: 0000:00:09.0 reg 14 io port: [b080, b087]
>PCI: 0000:00:09.0 reg 18 32bit mmio: [f9efa000, f9efa0ff]
>PCI: 0000:00:09.0 reg 1c 32bit mmio: [f9ef4c00, f9ef4c0f]
>pci 0000:00:09.0: supports D1
>pci 0000:00:09.0: supports D2
>pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:09.0: PME# disabled
>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0c.0: PME# disabled
>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0d.0: PME# disabled
>pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0e.0: PME# disabled
>pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0f.0: PME# disabled
>PCI: 0000:01:02.0 reg 10 32bit mmio: [f9ff0000, f9ffffff]
>pci 0000:00:06.0: transparent bridge
>PCI: bridge 0000:00:06.0 32bit mmio: [f9f00000, f9ffffff]
>PCI: 0000:07:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
>PCI: 0000:07:00.0 reg 14 64bit mmio: [c0000000, cfffffff]
>PCI: 0000:07:00.0 reg 1c 64bit mmio: [fa000000, fbffffff]
>PCI: 0000:07:00.0 reg 24 io port: [ec00, ec7f]
>PCI: 0000:07:00.0 reg 30 32bit mmio: [febe0000, febfffff]
>PCI: bridge 0000:00:0f.0 io port: [e000, efff]
>PCI: bridge 0000:00:0f.0 32bit mmio: [fa000000, febfffff]
>PCI: bridge 0000:00:0f.0 64bit mmio pref: [c0000000, cfffffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 21 22 23) *7
>ACPI: PCI Interrupt Link [LMAD] (IRQs 20) *5
>ACPI: PCI Interrupt Link [LUB2] (IRQs 21 22 23) *10
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
>ACPI: PCI Interrupt Link [LAZA] (IRQs 21 22 23) *10
>ACPI: PCI Interrupt Link [LSMB] (IRQs 21 22 23) *11
>ACPI: PCI Interrupt Link [LPMU] (IRQs 21 22 23) *5
>ACPI: PCI Interrupt Link [LSA0] (IRQs 21 22 23) *11
>ACPI: PCI Interrupt Link [LSA1] (IRQs 21 22 23) *5
>ACPI: PCI Interrupt Link [LATA] (IRQs 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSA2] (IRQs 21 22 23) *10
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 15, should be 14 [20080609]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>AppArmor: AppArmor Filesystem Enabled
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>ACPI: RTC can wake from S4
>system 00:06: ioport range 0x4d0-0x4d1 has been reserved
>system 00:06: ioport range 0x800-0x80f has been reserved
>system 00:06: ioport range 0x2000-0x207f has been reserved
>system 00:06: ioport range 0x2080-0x20ff has been reserved
>system 00:06: ioport range 0x2400-0x247f has been reserved
>system 00:06: ioport range 0x2480-0x24ff has been reserved
>system 00:06: ioport range 0x2800-0x287f has been reserved
>system 00:06: ioport range 0x2880-0x28ff has been reserved
>system 00:06: ioport range 0x2c00-0x2c7f has been reserved
>system 00:06: ioport range 0x2c80-0x2cff has been reserved
>system 00:06: iomem range 0xf9e80000-0xf9ebffff has been reserved
>system 00:06: iomem range 0xfee01000-0xfeefffff could not be reserved
>system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0b: ioport range 0xa00-0xa0f has been reserved
>system 00:0b: ioport range 0xa10-0xa1f has been reserved
>system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0d: iomem range 0xd0000000-0xdfffffff could not be reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0xc0000-0xcffff has been reserved
>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved
>system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
>pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:06.0:   IO window: disabled
>pci 0000:00:06.0:   MEM window: 0xf9f00000-0xf9ffffff
>pci 0000:00:06.0:   PREFETCH window: disabled
>pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:0a.0:   IO window: disabled
>pci 0000:00:0a.0:   MEM window: disabled
>pci 0000:00:0a.0:   PREFETCH window: disabled
>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:0b.0:   IO window: disabled
>pci 0000:00:0b.0:   MEM window: disabled
>pci 0000:00:0b.0:   PREFETCH window: disabled
>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:0c.0:   IO window: disabled
>pci 0000:00:0c.0:   MEM window: disabled
>pci 0000:00:0c.0:   PREFETCH window: disabled
>pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:0d.0:   IO window: disabled
>pci 0000:00:0d.0:   MEM window: disabled
>pci 0000:00:0d.0:   PREFETCH window: disabled
>pci 0000:00:0e.0: PCI bridge, secondary bus 0000:06
>pci 0000:00:0e.0:   IO window: disabled
>pci 0000:00:0e.0:   MEM window: disabled
>pci 0000:00:0e.0:   PREFETCH window: disabled
>pci 0000:00:0f.0: PCI bridge, secondary bus 0000:07
>pci 0000:00:0f.0:   IO window: 0xe000-0xefff
>pci 0000:00:0f.0:   MEM window: 0xfa000000-0xfebfffff
>pci 0000:00:0f.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
>pci 0000:00:06.0: setting latency timer to 64
>pci 0000:00:0a.0: setting latency timer to 64
>pci 0000:00:0b.0: setting latency timer to 64
>pci 0000:00:0c.0: setting latency timer to 64
>pci 0000:00:0d.0: setting latency timer to 64
>pci 0000:00:0e.0: setting latency timer to 64
>pci 0000:00:0f.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 mmio: [0, 0]
>bus: 01 index 1 mmio: [f9f00000, f9ffffff]
>bus: 01 index 2 mmio: [0, 0]
>bus: 01 index 3 io port: [0, ffff]
>bus: 01 index 4 mmio: [0, ffffffffffffffff]
>bus: 02 index 0 mmio: [0, 0]
>bus: 02 index 1 mmio: [0, 0]
>bus: 02 index 2 mmio: [0, 0]
>bus: 02 index 3 mmio: [0, 0]
>bus: 03 index 0 mmio: [0, 0]
>bus: 03 index 1 mmio: [0, 0]
>bus: 03 index 2 mmio: [0, 0]
>bus: 03 index 3 mmio: [0, 0]
>bus: 04 index 0 mmio: [0, 0]
>bus: 04 index 1 mmio: [0, 0]
>bus: 04 index 2 mmio: [0, 0]
>bus: 04 index 3 mmio: [0, 0]
>bus: 05 index 0 mmio: [0, 0]
>bus: 05 index 1 mmio: [0, 0]
>bus: 05 index 2 mmio: [0, 0]
>bus: 05 index 3 mmio: [0, 0]
>bus: 06 index 0 mmio: [0, 0]
>bus: 06 index 1 mmio: [0, 0]
>bus: 06 index 2 mmio: [0, 0]
>bus: 06 index 3 mmio: [0, 0]
>bus: 07 index 0 io port: [e000, efff]
>bus: 07 index 1 mmio: [fa000000, febfffff]
>bus: 07 index 2 mmio: [c0000000, cfffffff]
>bus: 07 index 3 mmio: [0, 0]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Unpacking initramfs... done
>Freeing initrd memory: 6034k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1232135128.621:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 1506
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Enabling HT MSI Mapping
>pci 0000:00:05.0: Enabling HT MSI Mapping
>pci 0000:00:05.1: Enabling HT MSI Mapping
>pci 0000:00:05.2: Enabling HT MSI Mapping
>pci 0000:00:06.0: Enabling HT MSI Mapping
>pci 0000:00:06.1: Enabling HT MSI Mapping
>pci 0000:00:08.0: Enabling HT MSI Mapping
>pci 0000:00:09.0: Enabling HT MSI Mapping
>pci 0000:00:0a.0: Enabling HT MSI Mapping
>pci 0000:00:0b.0: Enabling HT MSI Mapping
>pci 0000:00:0c.0: Enabling HT MSI Mapping
>pci 0000:00:0d.0: Enabling HT MSI Mapping
>pci 0000:00:0e.0: Enabling HT MSI Mapping
>pci 0000:00:0f.0: Enabling HT MSI Mapping
>pci 0000:07:00.0: Boot video device
>pcieport-driver 0000:00:0a.0: setting latency timer to 64
>pcieport-driver 0000:00:0a.0: found MSI capability
>pci_express 0000:00:0a.0:pcie00: allocate port service
>pci_express 0000:00:0a.0:pcie03: allocate port service
>pcieport-driver 0000:00:0b.0: setting latency timer to 64
>pcieport-driver 0000:00:0b.0: found MSI capability
>pci_express 0000:00:0b.0:pcie00: allocate port service
>pci_express 0000:00:0b.0:pcie03: allocate port service
>pcieport-driver 0000:00:0c.0: setting latency timer to 64
>pcieport-driver 0000:00:0c.0: found MSI capability
>pci_express 0000:00:0c.0:pcie00: allocate port service
>pci_express 0000:00:0c.0:pcie03: allocate port service
>pcieport-driver 0000:00:0d.0: setting latency timer to 64
>pcieport-driver 0000:00:0d.0: found MSI capability
>pci_express 0000:00:0d.0:pcie00: allocate port service
>pci_express 0000:00:0d.0:pcie03: allocate port service
>pcieport-driver 0000:00:0e.0: setting latency timer to 64
>pcieport-driver 0000:00:0e.0: found MSI capability
>pci_express 0000:00:0e.0:pcie00: allocate port service
>pci_express 0000:00:0e.0:pcie03: allocate port service
>pcieport-driver 0000:00:0f.0: setting latency timer to 64
>pcieport-driver 0000:00:0f.0: found MSI capability
>pci_express 0000:00:0f.0:pcie00: allocate port service
>pci_express 0000:00:0f.0:pcie03: allocate port service
>vesafb: framebuffer at 0xfb000000, mapped to 0xffffc20011100000, using 10240k, total 14336k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 113709 bytes
>bootsplash: ...found (1280x1024, 43709 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver8 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>registered taskstats version 1
>Freeing unused kernel memory: 1472k freed
>Write protecting the kernel read-only data: 5024k
>ACPI: No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>pata_amd 0000:00:04.0: version 0.3.10
>pata_amd 0000:00:04.0: setting latency timer to 64
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata2: port disabled. ignoring.
>sata_nv 0000:00:05.0: version 3.5
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
>sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:05.0: Using SWNCQ mode
>sata_nv 0000:00:05.0: setting latency timer to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xcc00 irq 23
>ata4: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xcc08 irq 23
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7: ST3250824AS, 3.AAE, max UDMA/133
>ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATAPI: HL-DT-STDVD-RAM GSA-H30N, 1.01, max UDMA/100
>ata4.00: configured for UDMA/100
>isa bounce pool size: 16 pages
>scsi 2:0:0:0: Direct-Access     ATA      ST3250824AS      3.AA PQ: 0 ANSI: 5
>scsi 3:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H30N 1.01 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
>sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
>sata_nv 0000:00:05.1: Using SWNCQ mode
>sata_nv 0000:00:05.1: setting latency timer to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 22
>ata6: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 22
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATA-7: WDC WD1600AAJS-00PSA0, 05.06H05, max UDMA/133
>ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata5.00: configured for UDMA/133
>scsi 4:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
>sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21
>sata_nv 0000:00:05.2: Using SWNCQ mode
>sata_nv 0000:00:05.2: setting latency timer to 64
>scsi6 : sata_nv
>scsi7 : sata_nv
>ata7: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 21
>ata8: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 21
>processor ACPI_CPU:00: registered as cooling_device0
>processor ACPI_CPU:01: registered as cooling_device1
>Uniform Multi-Platform E-IDE driver
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>udevd version 128 started
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 23, io mem 0xf9efb000
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250GB/232GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250GB/232GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 2:0:0:0: [sda] Attached SCSI disk
>sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160GB/149GiB)
>sd 4:0:0:0: [sdb] Write Protect is off
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160GB/149GiB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 4:0:0:0: [sdb] Attached SCSI disk
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd
>usb usb1: SerialNumber: 0000:00:02.0
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
>ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9efac00
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27.7-9-default ehci_hcd
>usb usb2: SerialNumber: 0000:00:02.1
>usb 2-2: new high speed USB device using ehci_hcd and address 3
>usb 2-2: config 1 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 189
>usb 2-2: configuration #1 chosen from 1 choice
>usb 2-2: New USB device found, idVendor=14aa, idProduct=0221
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: Digital TV Receiver
>usb 2-2: Manufacturer: Digital TV Receiver
>usb 1-1: new low speed USB device using ohci_hcd and address 2
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: New USB device found, idVendor=046d, idProduct=c517
>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1: Product: USB Receiver
>usb 1-1: Manufacturer: Logitech
>usb 1-3: new full speed USB device using ohci_hcd and address 3
>usb 1-3: configuration #1 chosen from 1 choice
>usb 1-3: New USB device found, idVendor=0d8c, idProduct=000c
>usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-3: Product: C-Media USB Headphone Set  
>usbcore: registered new interface driver hiddev
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/input/input0
>input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-1
>Fixing up Logitech keyboard report descriptor
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.1/input/input1
>input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-1
>input: C-Media USB Headphone Set   as /devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3:1.3/input/input2
>input,hidraw2: USB HID v1.00 Device [C-Media USB Headphone Set  ] on usb-0000:00:02.0-3
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>PM: Starting manual resume from disk
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>udevd version 128 started
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
>forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
>forcedeth 0000:00:08.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
>ACPI: Power Button (CM) [PWRB]
>forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 0, addr 00:16:17:9b:64:d7
>forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
>ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 20
>forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 20 (level, low) -> IRQ 20
>forcedeth 0000:00:09.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x1c1 @ 1, addr 00:16:17:9b:64:d8
>forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
>vendor=10de device=0377
>nvidia 0000:07:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
>nvidia 0000:07:00.0: setting latency timer to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  177.82  Tue Nov  4 16:50:05 PST 2008
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
>ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
>resource map sanity check conflict  0xff000000 0xffffffff 0xff780000 0xffffffff reserved
>------------[ cut here ]------------
>WARNING: at arch/x86/mm/ioremap.c:156 __ioremap_caller+0xc8/0x369()
>Modules linked in: ck804xrom(N+) snd_timer dvb_core(N) led_class i2c_nforce2 snd_seq_device mtd snd_page_alloc rtc_lib chipreg(N) nvidia(PN) snd_hwdep cfg80211 button joydev sr_mod snd pcspkr map_funcs(N) serio_raw i2c_core k8temp(N) cdrom soundcore forcedeth sg usbhid hid ff_memless sd_mod crc_t10dif ehci_hcd ohci_hcd usbcore dm_snapshot dm_mod edd ext3 mbcache jbd fan ide_pci_generic amd74xx ide_core ata_generic thermal processor thermal_sys hwmon sata_nv pata_amd libata scsi_mod dock
>Supported: No
>Pid: 863, comm: modprobe Tainted: P          2.6.27.7-9-default #1
>
>Call Trace:
> [<ffffffff8020e42e>] show_trace_log_lvl+0x41/0x58
> [<ffffffff804a1e97>] dump_stack+0x69/0x6f
> [<ffffffff80240eb2>] warn_on_slowpath+0x51/0x77
> [<ffffffff80228ab4>] __ioremap_caller+0xc8/0x369
> [<ffffffffa099e35f>] ck804xrom_init_one+0x24f/0x50d [ck804xrom]
> [<ffffffffa0147042>] init_ck804xrom+0x42/0x4e [ck804xrom]
> [<ffffffff80209041>] _stext+0x41/0x11d
> [<ffffffff80265ec9>] sys_init_module+0xa0/0x1ba
> [<ffffffff8020c37a>] system_call_fastpath+0x16/0x1b
> [<00007fdcd441a74a>] 0x7fdcd441a74a
>
>---[ end trace c39627e91b087843 ]---
>dvb-usb: found a 'WideView WT-220U PenType Receiver (Typhoon/Freecom)' in warm state.
>dvb-usb: will use the device's hardware PID filter (table count: 15).
>DVB: registering new adapter (WideView WT-220U PenType Receiver (Typhoon/Freecom))
>DVB: registering frontend 0 (WideView USB DVB-T)...
>input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb2/2-2/input/input6
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, hpet irqs
>dvb-usb: schedule remote query interval to 300 msecs.
>dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully initialized and connected.
>usbcore: registered new interface driver dvb_usb_dtt200u
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
>vendor=10de device=0370
>ath5k_pci 0000:01:02.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
>ath5k_pci 0000:01:02.0: registered as 'phy0'
>phy0: Selected rate control algorithm 'pid'
>usbcore: registered new interface driver snd-usb-audio
>Found: PMC Pm49FL004
>ck804xrom @fff80000: Found 1 x8 devices at 0x0 in 8-bit bank
>ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
>HDA Intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:06.1: setting latency timer to 64
>number of JEDEC chips: 1
>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
>dvb-usb: recv bulk message failed: -110
>Adding 3060372k swap on /dev/mapper/pdc_cbegijeiii_part2.  Priority:-1 extents:1 across:3060372k
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>REISERFS (device dm-3): found reiserfs format "3.6" with standard journal
>REISERFS (device dm-3): using ordered data mode
>REISERFS (device dm-3): journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device dm-3): checking transaction log (dm-3)
>REISERFS (device dm-3): Using r5 hash to sort names
>fuse init (API version 7.9)
>type=1505 audit(1232135157.355:2): operation="profile_load" name="/bin/ping" name2="default" pid=2186
>type=1505 audit(1232135157.387:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=2187
>type=1505 audit(1232135157.447:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=2188
>type=1505 audit(1232135157.511:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=2189
>type=1505 audit(1232135157.583:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=2206
>type=1505 audit(1232135157.659:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=2209
>type=1505 audit(1232135157.735:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=2213
>type=1505 audit(1232135157.827:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=2220
>type=1505 audit(1232135157.927:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=2230
>type=1505 audit(1232135157.987:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=2259
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0x10 (2400 MHz), vid 0xc
>powernow-k8:    1 : fid 0xe (2200 MHz), vid 0xe
>powernow-k8:    2 : fid 0xc (2000 MHz), vid 0x10
>powernow-k8:    3 : fid 0xa (1800 MHz), vid 0x10
>powernow-k8:    4 : fid 0x2 (1000 MHz), vid 0x12
>Clocksource tsc unstable (delta = -291077148 ns)
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>/dev/vmmon[3093]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[3093]: Initial HV check: anyNotCapable=0 anyUnlocked=1 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3093]: HV check: anyNotCapable=0 anyUnlocked=1 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3093]: Module vmmon: initialized
>/dev/vmci[3109]: VMCI: Driver initialized.
>/dev/vmci[3109]: Module vmci: registered with major=10 minor=59
>/dev/vmci[3109]: Module vmci: initialized
>ppdev: user-space parallel port driver
>/dev/vmnet: open called by PID 3709 (vmnet-dhcpd)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 3713 (vmnet-netifup)
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 3722 (vmnet-dhcpd)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 3753 (vmnet-natd)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 3774 (vmnet-netifup)
>/dev/vmnet: port on hub 8 successfully opened
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>bootsplash: status on console 0 changed to on
>eth0: no link during initialization.
>/dev/vmnet: open called by PID 3189 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: up
>bridge-eth0: attached
>bridge-eth0: disabling the bridge
>bridge-eth0: down
>eth1: no link during initialization.
>bridge-eth0: detached
>/dev/vmnet: open called by PID 3189 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth1: up
>bridge-eth1: attached
>bridge-eth1: disabling the bridge
>bridge-eth1: down
>bridge-eth1: detached
>ath5k phy0: noise floor calibration failed (2442MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2442 Mhz)
>wlan0: failed to set freq to 2442 MHz for scan
>ath5k phy0: noise floor calibration failed (2447MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2447 Mhz)
>wlan0: failed to set freq to 2447 MHz for scan
>ath5k phy0: noise floor calibration failed (2452MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2452 Mhz)
>wlan0: failed to set freq to 2452 MHz for scan
>ath5k phy0: noise floor calibration failed (2457MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2457 Mhz)
>wlan0: failed to set freq to 2457 MHz for scan
>ath5k phy0: noise floor calibration failed (2462MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2462 Mhz)
>wlan0: failed to set freq to 2462 MHz for scan
>NET: Registered protocol family 17
>ath5k phy0: noise floor calibration failed (2442MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2442 Mhz)
>wlan0: failed to set freq to 2442 MHz for scan
>ath5k phy0: noise floor calibration failed (2447MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2447 Mhz)
>wlan0: failed to set freq to 2447 MHz for scan
>ath5k phy0: noise floor calibration failed (2452MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2452 Mhz)
>wlan0: failed to set freq to 2452 MHz for scan
>ath5k phy0: noise floor calibration timeout (2457MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2457 Mhz)
>wlan0: failed to set freq to 2457 MHz for scan
>ath5k phy0: noise floor calibration failed (2462MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2462 Mhz)
>wlan0: failed to set freq to 2462 MHz for scan
>ath5k phy0: noise floor calibration failed (2442MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2442 Mhz)
>wlan0: failed to set freq to 2442 MHz for scan
>ath5k phy0: noise floor calibration failed (2447MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2447 Mhz)
>wlan0: failed to set freq to 2447 MHz for scan
>ath5k phy0: noise floor calibration failed (2452MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2452 Mhz)
>wlan0: failed to set freq to 2452 MHz for scan
>ath5k phy0: noise floor calibration failed (2457MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2457 Mhz)
>wlan0: failed to set freq to 2457 MHz for scan
>ath5k phy0: noise floor calibration failed (2462MHz)
>ath5k phy0: ath5k_chan_set: unable to reset channel (2462 Mhz)
>wlan0: failed to set freq to 2462 MHz for scan

Actions: View

Attachments on bug 463247: 265774