Attachment 265992 Details for Bug 466484

Booting fails on x86_64

boot.omsg (text/plain), 59.43 KB, created by Sven Zielke on 2009-01-19 12:18:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Sven Zielke

Created: 2009-01-19 12:18:44 UTC

Size: 59.43 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.27.7-9-default
>Cannot find map file.
>No module symbols loaded - kernel modules not enabled.
>
>Cannot build symbol table - disabling symbol lookups
>klogd 1.4.1, log source = ksyslog started.
><6>Initializing cgroup subsys cpuset
><6>Initializing cgroup subsys cpu
><5>Linux version 2.6.27.7-9-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
><6>Command line: root=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 resume=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part6 splash=silent nosplash
><4>KERNEL supported cpus:
><4>  Intel GenuineIntel
><4>  AMD AuthenticAMD
><4>  Centaur CentaurHauls
><6>BIOS-provided physical RAM map:
><6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
><6> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
><6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
><6> BIOS-e820: 0000000000100000 - 000000006fee0000 (usable)
><6> BIOS-e820: 000000006fee0000 - 000000006fee3000 (ACPI NVS)
><6> BIOS-e820: 000000006fee3000 - 000000006fef0000 (ACPI data)
><6> BIOS-e820: 000000006fef0000 - 000000006ff00000 (reserved)
><6> BIOS-e820: 0000000070000000 - 0000000080000000 (reserved)
><6> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
><6> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
><6>DMI 2.5 present.
><5>Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
><6>last_pfn = 0x6fee0 max_arch_pfn = 0x3ffffffff
><6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
><6>init_memory_mapping
><7> 0000000000 - 006fe00000 page 2M
><7> 006fe00000 - 006fee0000 page 4k
><7>kernel direct mapping tables up to 6fee0000 @ 10000-14000
><6>last_map_addr: 6fee0000 end: 6fee0000
><6>RAMDISK: 3798d000 - 37feff18
><4>ACPI: RSDP 000F7280, 0024 (r2 Nvidia)
><4>ACPI: XSDT 6FEE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
><4>ACPI: FACP 6FEED400, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
><4>ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080609]
><4>ACPI: DSDT 6FEE3280, A110 (r1 NVIDIA ASUSACPI     1000 MSFT  3000000)
><4>ACPI: FACS 6FEE0A80, 0040
><4>ACPI: SSDT 6FEED640, 028A (r1 PTLTD  POWERNOW        1  LTP        1)
><4>ACPI: HPET 6FEED940, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
><4>ACPI: MCFG 6FEED9C0, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
><4>ACPI: APIC 6FEED540, 008E (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
><7>ACPI: Local APIC address 0xfee00000
><6>Scanning NUMA topology in Northbridge 24
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-000000006fee0000
><6>Bootmem setup node 0 0000000000000000-000000006fee0000
><6>  NODE_DATA [0000000000012000 - 0000000000029fff]
><6>  bootmap [000000000002a000 -  0000000000037fdf] pages e
><6>(6 early reservations) ==> bootmem [0000000000 - 006fee0000]
><6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
><6>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
><6>  #2 [0000200000 - 0000bf27b8]    TEXT DATA BSS ==> [0000200000 - 0000bf27b8]
><6>  #3 [003798d000 - 0037feff18]          RAMDISK ==> [003798d000 - 0037feff18]
><6>  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
><6>  #5 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
><6>found SMP MP-table at [ffff8800000f56f0] 000f56f0
><7> [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
><4>Zone PFN ranges:
><4>  DMA      0x00000010 -> 0x00001000
><4>  DMA32    0x00001000 -> 0x00100000
><4>  Normal   0x00100000 -> 0x00100000
><4>Movable zone start PFN for each node
><4>early_node_map[2] active PFN ranges
><4>    0: 0x00000010 -> 0x0000009f
><4>    0: 0x00000100 -> 0x0006fee0
><7>On node 0 totalpages: 458351
><7>  DMA zone: 1269 pages, LIFO batch:0
><7>  DMA32 zone: 447268 pages, LIFO batch:31
><6>Detected use of extended apic ids on hypertransport bus
><6>ACPI: PM-Timer IO Port: 0x1008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
><6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
><6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><7>ACPI: IRQ14 used by override.
><6>ACPI: HPET id: 0x10de8201 base: 0xfeff0000
><6>Using ACPI (MADT) for SMP configuration information
><6>SMP: Allowing 4 CPUs, 2 hotplug CPUs
><6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
><6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
><6>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
><6>PERCPU: Allocating 62240 bytes of per cpu data
><7>NR_CPUS: 512, nr_cpu_ids: 4, nr_node_ids 1
><4>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 448537
><4>Policy zone: DMA32
><5>Kernel command line: root=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 resume=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part6 splash=silent nosplash
><6>bootsplash: silent mode.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>Extended CMOS year: 2000
><6>TSC: PIT calibration confirmed by PMTIMER.
><6>TSC: using PIT calibration value
><4>Detected 2499.927 MHz processor.
><7>spurious 8259A interrupt: IRQ7.
><4>Console: colour VGA+ 80x25
><6>console [tty0] enabled
><6>Checking aperture...
><6>No AGP bridge found
><6>Node 0: aperture @ 2004000000 size 32 MB
><3>Aperture beyond 4GB. Ignoring.
><6>Memory: 1787452k/1833856k available (2731k kernel code, 45952k reserved, 2620k data, 1472k init)
><7>CPA: page pool initialized 1 of 1 pages preallocated
><7>hpet clockevent registered
><6>Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.85 BogoMIPS (lpj=9999708)
><4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
><6>Security Framework initialized
><6>SELinux:  Disabled at boot.
><6>AppArmor: AppArmor initialized
><6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><6>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Mount-cache hash table entries: 256
><6>Initializing cgroup subsys ns
><6>Initializing cgroup subsys cpuacct
><6>Initializing cgroup subsys memory
><6>Initializing cgroup subsys devices
><6>Initializing cgroup subsys freezer
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 0/0 -> Node 0
><7>tseg: 006ff00000
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>using C1E aware idle routine
><6>ACPI: Core revision 20080609
><6>ACPI: Checking initramfs for custom DSDT
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 1700 Objects with 162 Devices 661 Methods 58 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
><4> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><6>Setting APIC routing to flat
><6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
><6>CPU0: AMD Athlon(tm) Dual Core Processor 4850e stepping 02
><6>Using local APIC timer interrupts.
><7>APIC timer calibration result 12499657
><6>Detected 12.499 MHz APIC timer.
><6>Booting processor 1/1 ip 6000
><6>Initializing CPU#1
><6>Calibrating delay using timer specific routine.. 4999.91 BogoMIPS (lpj=9999826)
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 1/1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><6>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
><6>CPU1: <6>System has AMD C1E enabled
><6>Switch to broadcast mode on CPU1
><4>AMD Athlon(tm) Dual Core Processor 4850e stepping 02
><6>Switch to broadcast mode on CPU0
><6>Brought up 2 CPUs
><6>Total of 2 processors activated (9999.76 BogoMIPS).
><7>CPU0 attaching sched-domain:
><7> domain 0: span 0-1 level CPU
><7>  groups: 0 1
><7>  domain 1: span 0-1 level NODE
><7>   groups: 0-1
><7>CPU1 attaching sched-domain:
><7> domain 0: span 0-1 level CPU
><7>  groups: 1 0
><7>  domain 1: span 0-1 level NODE
><7>   groups: 0-1
><6>net_namespace: 1936 bytes
><6>Booting paravirtualized kernel on bare hardware
><6>NET: Registered protocol family 16
><7>node 0 link 0: io port [7000, ffff]
><6>TOM: 0000000080000000 aka 2048M
><7>node 0 link 0: mmio [a0000, bffff]
><7>node 0 link 0: mmio [fdef0000, fdefffff]
><7>node 0 link 0: mmio [80000000, efffffff]
><7>node 0 link 0: mmio [f4000000, fe02ffff]
><7>node 0 link 0: mmio [f0000000, f06fffff]
><7>bus: [00,06] on node 0 link 0
><7>bus: 00 index 0 io port: [0, ffff]
><7>bus: 00 index 1 mmio: [a0000, bffff]
><7>bus: 00 index 2 mmio: [f0700000, fcffffffff]
><7>bus: 00 index 3 mmio: [80000000, f06fffff]
><6>ACPI: bus type pci registered
><5>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
><5>PCI: MCFG area at f0000000 reserved in E820
><6>PCI: Using MMCONFIG at f0000000 - f3ffffff
><6>PCI: Using configuration type 1 for base access
><4>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 20 to 5F [_GPE] 8 regs on int 0x9
><7>ACPI: EC: Look up EC in DSDT
><4>Completing Region/Field/Buffer/Package initialization:..........................................................................................................................................................................
><4>Initialized 52/58 Regions 11/11 Fields 46/46 Buffers 61/61 Packages (1717 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:...
><4>Executed 3 _INI methods requiring 1 _STA executions (examined 169 objects)
><4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 10 Wake, Enabled 1 Runtime GPEs in this block
><4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 1 Runtime GPEs in this block
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: 0000:00:01.1 reg 10 io port: [fc00, fc3f]
><7>PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f]
><7>PCI: 0000:00:01.1 reg 24 io port: [1c40, 1c7f]
><6>pci 0000:00:01.1: PME# supported from D3hot D3cold
><6>pci 0000:00:01.1: PME# disabled
><7>PCI: 0000:00:01.3 reg 10 32bit mmio: [fdf80000, fdffffff]
><7>PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
><7>pci 0000:00:02.0: supports D1
><7>pci 0000:00:02.0: supports D2
><6>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:02.0: PME# disabled
><7>PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff]
><7>pci 0000:00:02.1: supports D1
><7>pci 0000:00:02.1: supports D2
><6>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:02.1: PME# disabled
><7>PCI: 0000:00:04.0 reg 10 32bit mmio: [fe02d000, fe02dfff]
><7>pci 0000:00:04.0: supports D1
><7>pci 0000:00:04.0: supports D2
><6>pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:04.0: PME# disabled
><7>PCI: 0000:00:04.1 reg 10 32bit mmio: [fe02c000, fe02c0ff]
><7>pci 0000:00:04.1: supports D1
><7>pci 0000:00:04.1: supports D2
><6>pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:04.1: PME# disabled
><7>PCI: 0000:00:06.0 reg 20 io port: [f000, f00f]
><7>PCI: 0000:00:07.0 reg 10 32bit mmio: [fe020000, fe023fff]
><6>pci 0000:00:07.0: PME# supported from D3hot D3cold
><6>pci 0000:00:07.0: PME# disabled
><7>PCI: 0000:00:09.0 reg 10 io port: [9f0, 9f7]
><7>PCI: 0000:00:09.0 reg 14 io port: [bf0, bf3]
><7>PCI: 0000:00:09.0 reg 18 io port: [970, 977]
><7>PCI: 0000:00:09.0 reg 1c io port: [b70, b73]
><7>PCI: 0000:00:09.0 reg 20 io port: [dc00, dc0f]
><7>PCI: 0000:00:09.0 reg 24 32bit mmio: [fe026000, fe027fff]
><7>PCI: 0000:00:0a.0 reg 10 32bit mmio: [fe02b000, fe02bfff]
><7>PCI: 0000:00:0a.0 reg 14 io port: [d800, d807]
><7>PCI: 0000:00:0a.0 reg 18 32bit mmio: [fe02a000, fe02a0ff]
><7>PCI: 0000:00:0a.0 reg 1c 32bit mmio: [fe029000, fe02900f]
><7>pci 0000:00:0a.0: supports D1
><7>pci 0000:00:0a.0: supports D2
><6>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:0a.0: PME# disabled
><6>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:0b.0: PME# disabled
><6>pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:10.0: PME# disabled
><6>pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:12.0: PME# disabled
><6>pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:13.0: PME# disabled
><6>pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:14.0: PME# disabled
><7>PCI: 0000:01:0a.0 reg 10 32bit mmio: [fdeff000, fdefffff]
><7>pci 0000:01:0a.0: supports D1
><7>pci 0000:01:0a.0: supports D2
><6>pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot
><6>pci 0000:01:0a.0: PME# disabled
><7>PCI: 0000:01:0b.0 reg 10 32bit mmio: [fdefe000, fdefe3ff]
><7>pci 0000:01:0b.0: supports D1
><7>pci 0000:01:0b.0: supports D2
><6>pci 0000:00:08.0: transparent bridge
><7>PCI: bridge 0000:00:08.0 io port: [c000, cfff]
><7>PCI: bridge 0000:00:08.0 32bit mmio: [fde00000, fdefffff]
><7>PCI: bridge 0000:00:08.0 32bit mmio pref: [fdd00000, fddfffff]
><7>PCI: 0000:02:00.0 reg 10 32bit mmio: [fb000000, fbffffff]
><7>PCI: 0000:02:00.0 reg 14 64bit mmio: [d8000000, dfffffff]
><7>PCI: 0000:02:00.0 reg 1c 64bit mmio: [e6000000, e7ffffff]
><7>PCI: 0000:02:00.0 reg 24 io port: [bc00, bc7f]
><7>PCI: 0000:02:00.0 reg 30 32bit mmio: [0, 1ffff]
><7>PCI: bridge 0000:00:0b.0 io port: [b000, bfff]
><7>PCI: bridge 0000:00:0b.0 32bit mmio: [fb000000, fcffffff]
><7>PCI: bridge 0000:00:0b.0 64bit mmio pref: [d8000000, e7ffffff]
><7>PCI: bridge 0000:00:10.0 io port: [a000, afff]
><7>PCI: bridge 0000:00:10.0 32bit mmio: [fdc00000, fdcfffff]
><7>PCI: bridge 0000:00:10.0 64bit mmio pref: [fdb00000, fdbfffff]
><7>PCI: bridge 0000:00:12.0 io port: [9000, 9fff]
><7>PCI: bridge 0000:00:12.0 32bit mmio: [fda00000, fdafffff]
><7>PCI: bridge 0000:00:12.0 64bit mmio pref: [fd900000, fd9fffff]
><7>PCI: bridge 0000:00:13.0 io port: [8000, 8fff]
><7>PCI: bridge 0000:00:13.0 32bit mmio: [fd800000, fd8fffff]
><7>PCI: bridge 0000:00:13.0 64bit mmio pref: [fd700000, fd7fffff]
><7>PCI: bridge 0000:00:14.0 io port: [7000, 7fff]
><7>PCI: bridge 0000:00:14.0 32bit mmio: [fd600000, fd6fffff]
><7>PCI: bridge 0000:00:14.0 64bit mmio pref: [fd500000, fd5fffff]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
><6>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
><6>ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 10 *11 14 15)
><6>ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE1C] (IRQs *5 7 9 10 11 14 15)
><6>ACPI: PCI Interrupt Link [LE1D] (IRQs 5 7 9 *10 11 14 15)
><6>ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
><6>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
><6>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
><6>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 *7 9 10 11 14 15)
><6>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
><6>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
><6>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
><6>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
><6>ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0
><6>ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0
><6>ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0
><6>ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
><6>ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
><6>ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
><6>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
><6>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
><6>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 12 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PCI: Using ACPI for IRQ routing
><6>hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
><6>hpet0: 3 32-bit timers, 25000000 Hz
><6>AppArmor: AppArmor Filesystem Enabled
><7>Switched to high resolution mode on CPU 0
><7>Switched to high resolution mode on CPU 1
><4>ACPI: RTC can wake from S4
><6>system 00:01: ioport range 0x1000-0x107f has been reserved
><6>system 00:01: ioport range 0x1080-0x10ff has been reserved
><6>system 00:01: ioport range 0x1400-0x147f has been reserved
><6>system 00:01: ioport range 0x1480-0x14ff has been reserved
><6>system 00:01: ioport range 0x1800-0x187f has been reserved
><6>system 00:01: ioport range 0x1880-0x18ff has been reserved
><6>system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved
><6>system 00:01: iomem range 0x70000000-0x7fffffff could not be reserved
><6>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
><6>system 00:02: ioport range 0x800-0x87f has been reserved
><6>system 00:02: ioport range 0x290-0x297 has been reserved
><6>system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved
><6>system 00:0b: iomem range 0xcd200-0xcffff has been reserved
><6>system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
><6>system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
><6>system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
><6>system 00:0b: iomem range 0xfeff0000-0xfeff00ff could not be reserved
><6>system 00:0b: iomem range 0x6fee0000-0x6fefffff could not be reserved
><6>system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved
><6>system 00:0b: iomem range 0x0-0x9ffff could not be reserved
><6>system 00:0b: iomem range 0x100000-0x6fedffff could not be reserved
><6>system 00:0b: iomem range 0x6fff0000-0x7ffeffff could not be reserved
><6>system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
><6>system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
><6>system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved
><6>system 00:0b: iomem range 0xfff80000-0xfff80fff could not be reserved
><6>system 00:0b: iomem range 0xfff90000-0xfffbffff could not be reserved
><6>system 00:0b: iomem range 0xfffed000-0xfffeffff could not be reserved
><6>pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
><6>pci 0000:00:08.0:   IO window: 0xc000-0xcfff
><6>pci 0000:00:08.0:   MEM window: 0xfde00000-0xfdefffff
><6>pci 0000:00:08.0:   PREFETCH window: 0x000000fdd00000-0x000000fddfffff
><6>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
><6>pci 0000:00:0b.0:   IO window: 0xb000-0xbfff
><6>pci 0000:00:0b.0:   MEM window: 0xfb000000-0xfcffffff
><6>pci 0000:00:0b.0:   PREFETCH window: 0x000000d8000000-0x000000e7ffffff
><6>pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
><6>pci 0000:00:10.0:   IO window: 0xa000-0xafff
><6>pci 0000:00:10.0:   MEM window: 0xfdc00000-0xfdcfffff
><6>pci 0000:00:10.0:   PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
><6>pci 0000:00:12.0: PCI bridge, secondary bus 0000:04
><6>pci 0000:00:12.0:   IO window: 0x9000-0x9fff
><6>pci 0000:00:12.0:   MEM window: 0xfda00000-0xfdafffff
><6>pci 0000:00:12.0:   PREFETCH window: 0x000000fd900000-0x000000fd9fffff
><6>pci 0000:00:13.0: PCI bridge, secondary bus 0000:05
><6>pci 0000:00:13.0:   IO window: 0x8000-0x8fff
><6>pci 0000:00:13.0:   MEM window: 0xfd800000-0xfd8fffff
><6>pci 0000:00:13.0:   PREFETCH window: 0x000000fd700000-0x000000fd7fffff
><6>pci 0000:00:14.0: PCI bridge, secondary bus 0000:06
><6>pci 0000:00:14.0:   IO window: 0x7000-0x7fff
><6>pci 0000:00:14.0:   MEM window: 0xfd600000-0xfd6fffff
><6>pci 0000:00:14.0:   PREFETCH window: 0x000000fd500000-0x000000fd5fffff
><7>pci 0000:00:08.0: setting latency timer to 64
><7>pci 0000:00:0b.0: setting latency timer to 64
><4>ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
><6>pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16
><7>pci 0000:00:10.0: setting latency timer to 64
><4>ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16
><6>pci 0000:00:12.0: PCI INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16
><7>pci 0000:00:12.0: setting latency timer to 64
><4>ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16
><6>pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16
><7>pci 0000:00:13.0: setting latency timer to 64
><4>ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
><6>pci 0000:00:14.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
><7>pci 0000:00:14.0: setting latency timer to 64
><6>bus: 00 index 0 io port: [0, ffff]
><6>bus: 00 index 1 mmio: [0, ffffffffffffffff]
><6>bus: 01 index 0 io port: [c000, cfff]
><6>bus: 01 index 1 mmio: [fde00000, fdefffff]
><6>bus: 01 index 2 mmio: [fdd00000, fddfffff]
><6>bus: 01 index 3 io port: [0, ffff]
><6>bus: 01 index 4 mmio: [0, ffffffffffffffff]
><6>bus: 02 index 0 io port: [b000, bfff]
><6>bus: 02 index 1 mmio: [fb000000, fcffffff]
><6>bus: 02 index 2 mmio: [d8000000, e7ffffff]
><6>bus: 02 index 3 mmio: [0, 0]
><6>bus: 03 index 0 io port: [a000, afff]
><6>bus: 03 index 1 mmio: [fdc00000, fdcfffff]
><6>bus: 03 index 2 mmio: [fdb00000, fdbfffff]
><6>bus: 03 index 3 mmio: [0, 0]
><6>bus: 04 index 0 io port: [9000, 9fff]
><6>bus: 04 index 1 mmio: [fda00000, fdafffff]
><6>bus: 04 index 2 mmio: [fd900000, fd9fffff]
><6>bus: 04 index 3 mmio: [0, 0]
><6>bus: 05 index 0 io port: [8000, 8fff]
><6>bus: 05 index 1 mmio: [fd800000, fd8fffff]
><6>bus: 05 index 2 mmio: [fd700000, fd7fffff]
><6>bus: 05 index 3 mmio: [0, 0]
><6>bus: 06 index 0 io port: [7000, 7fff]
><6>bus: 06 index 1 mmio: [fd600000, fd6fffff]
><6>bus: 06 index 2 mmio: [fd500000, fd5fffff]
><6>bus: 06 index 3 mmio: [0, 0]
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
><6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 262144 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 6539k freed
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1232370019.944:1): initialized
><6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>msgmni has been set to 875
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>pci 0000:00:07.0: Enabling HT MSI Mapping
><6>pci 0000:00:08.0: Enabling HT MSI Mapping
><6>pci 0000:00:09.0: Enabling HT MSI Mapping
><6>pci 0000:00:0a.0: Enabling HT MSI Mapping
><6>pci 0000:00:0b.0: Enabling HT MSI Mapping
><6>pci 0000:00:10.0: Enabling HT MSI Mapping
><6>pci 0000:00:12.0: Enabling HT MSI Mapping
><6>pci 0000:00:13.0: Enabling HT MSI Mapping
><6>pci 0000:00:14.0: Enabling HT MSI Mapping
><7>pci 0000:02:00.0: Boot video device
><7>pcieport-driver 0000:00:10.0: setting latency timer to 64
><6>pcieport-driver 0000:00:10.0: found MSI capability
><7>pci_express 0000:00:10.0:pcie00: allocate port service
><7>pcieport-driver 0000:00:12.0: setting latency timer to 64
><6>pcieport-driver 0000:00:12.0: found MSI capability
><7>pci_express 0000:00:12.0:pcie00: allocate port service
><7>pcieport-driver 0000:00:13.0: setting latency timer to 64
><6>pcieport-driver 0000:00:13.0: found MSI capability
><7>pci_express 0000:00:13.0:pcie00: allocate port service
><7>pcieport-driver 0000:00:14.0: setting latency timer to 64
><6>pcieport-driver 0000:00:14.0: found MSI capability
><7>pci_express 0000:00:14.0:pcie00: allocate port service
><7>hpet_resources: 0xfeff0000 is busy
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.103
><6>Serial: 8250/16550 driver8 ports, IRQ sharing disabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>PNP: No PS/2 controller found. Probing ports directly.
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>TCP cubic registered
><4>registered taskstats version 1
><6>Freeing unused kernel memory: 1472k freed
><6>Write protecting the kernel read-only data: 5024k
><5>ACPI: processor limited to max C-state 1
><6>processor ACPI_CPU:00: registered as cooling_device0
><6>processor ACPI_CPU:01: registered as cooling_device1
><3>ACPI: Expecting a [Reference] package element, found type 0
><6>thermal LNXTHERM:01: registered as thermal_zone0
><6>ACPI: Thermal Zone [THRM] (40 C)
><6>ACPI: No dock devices found.
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><7>pata_amd 0000:00:06.0: version 0.3.10
><7>pata_amd 0000:00:06.0: setting latency timer to 64
><6>scsi0 : pata_amd
><6>scsi1 : pata_amd
><6>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
><6>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
><6>ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS08, max UDMA/33
><7>ata1: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
><6>ata1.00: configured for UDMA/33
><7>ata2: port disabled. ignoring.
><4>isa bounce pool size: 16 pages
><5>scsi 0:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S162L TS08 PQ: 0 ANSI: 5
><7>ahci 0000:00:09.0: version 3.0
><4>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
><6>ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
><6>ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
><6>ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio 
><7>ahci 0000:00:09.0: setting latency timer to 64
><6>scsi2 : ahci
><6>scsi3 : ahci
><6>scsi4 : ahci
><6>scsi5 : ahci
><6>scsi6 : ahci
><6>scsi7 : ahci
><6>ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 4347
><6>ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 4347
><6>ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 4347
><6>ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 4347
><6>ata7: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 4347
><6>ata8: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 4347
><6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata3.00: ATA-8: WDC WD6400AAKS-75A7B0, 01.03B01, max UDMA/133
><6>ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
><6>ata3.00: configured for UDMA/133
><6>ata4: SATA link down (SStatus 0 SControl 300)
><6>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
><6>ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
><6>ata5.00: configured for UDMA/133
><6>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata6.00: ATAPI: TSSTcorpDVD-ROM SH-D163B, SB02, max UDMA/33, ATAPI AN
><6>ata6.00: configured for UDMA/33
><6>ata7: SATA link down (SStatus 0 SControl 300)
><6>ata8: SATA link down (SStatus 0 SControl 300)
><5>scsi 2:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5
><5>scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
><5>scsi 5:0:0:0: CD-ROM            TSSTcorp DVD-ROM SH-D163B SB02 PQ: 0 ANSI: 5
><6>Uniform Multi-Platform E-IDE driver
><6>fan PNP0C0B:00: registered as cooling_device2
><6>ACPI: Fan [FAN] (on)
><6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
><6>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, dmapi support, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>udevd version 128 started
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><4>ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 22
><6>ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 22 (level, low) -> IRQ 22
><7>ohci_hcd 0000:00:02.0: setting latency timer to 64
><6>ohci_hcd 0000:00:02.0: OHCI Host Controller
><6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
><6>ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000
><4>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
><5>sd 2:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640GB/596GiB)
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 2:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640GB/596GiB)
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda2 < sda5<6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 6 ports detected
><4> sda6 sda7 >
><5>sd 2:0:0:0: [sda] Attached SCSI disk
><5>sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500GB/465GiB)
><5>sd 4:0:0:0: [sdb] Write Protect is off
><7>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500GB/465GiB)
><5>sd 4:0:0:0: [sdb] Write Protect is off
><7>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: sdb1
><5>sd 4:0:0:0: [sdb] Attached SCSI disk
><6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: OHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd
><6>usb usb1: SerialNumber: 0000:00:02.0
><4>ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 21
><6>ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 21 (level, low) -> IRQ 21
><7>ohci_hcd 0000:00:04.0: setting latency timer to 64
><6>ohci_hcd 0000:00:04.0: OHCI Host Controller
><6>ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
><6>ohci_hcd 0000:00:04.0: irq 21, io mem 0xfe02d000
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 6 ports detected
><6>usb 1-2: new full speed USB device using ohci_hcd and address 2
><6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: OHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd
><6>usb usb2: SerialNumber: 0000:00:04.0
><4>ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 20
><6>ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 20 (level, low) -> IRQ 20
><7>ehci_hcd 0000:00:02.1: setting latency timer to 64
><6>ehci_hcd 0000:00:02.1: EHCI Host Controller
><6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
><6>ehci_hcd 0000:00:02.1: debug port 1
><7>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
><6>ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000
><6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 6 ports detected
><6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: EHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.27.7-9-default ehci_hcd
><6>usb usb3: SerialNumber: 0000:00:02.1
><4>ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 23
><6>ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 23 (level, low) -> IRQ 23
><7>ehci_hcd 0000:00:04.1: setting latency timer to 64
><6>ehci_hcd 0000:00:04.1: EHCI Host Controller
><6>ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4
><6>ehci_hcd 0000:00:04.1: debug port 1
><7>ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
><6>ehci_hcd 0000:00:04.1: irq 23, io mem 0xfe02c000
><6>ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 6 ports detected
><3>usb 1-2: device not accepting address 2, error -62
><6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: EHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.27.7-9-default ehci_hcd
><6>usb usb4: SerialNumber: 0000:00:04.1
><3>hub 1-0:1.0: unable to enumerate USB device on port 2
><6>PM: Starting manual resume from disk
><6>usb 3-2: new high speed USB device using ehci_hcd and address 2
><6>usb 3-2: configuration #1 chosen from 1 choice
><6>usb 3-2: New USB device found, idVendor=148f, idProduct=2573
><6>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 3-2: Product: 802.11 bg WLAN
><6>usb 3-2: Manufacturer: Ralink
><6>usb 3-3: new high speed USB device using ehci_hcd and address 3
><6>usb 3-3: configuration #1 chosen from 1 choice
><6>usb 3-3: New USB device found, idVendor=2040, idProduct=7070
><6>usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 3-3: Product: Nova-T Stick
><6>usb 3-3: Manufacturer: Hauppauge
><6>usb 3-3: SerialNumber: 4031084110
><6>usb 3-5: new high speed USB device using ehci_hcd and address 4
><6>usb 3-5: configuration #1 chosen from 1 choice
><6>usb 3-5: New USB device found, idVendor=058f, idProduct=6377
><6>usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 3-5: Product: Mass Storage Device
><6>usb 3-5: Manufacturer: Generic
><6>usb 3-5: SerialNumber: 920321111113
><6>usb 4-3: new high speed USB device using ehci_hcd and address 3
><6>usb 4-3: configuration #1 chosen from 1 choice
><6>usb 4-3: New USB device found, idVendor=2040, idProduct=7070
><6>usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 4-3: Product: Nova-T Stick
><6>usb 4-3: Manufacturer: Hauppauge
><6>usb 4-3: SerialNumber: 4031157610
><6>usb 2-1: new low speed USB device using ohci_hcd and address 2
><6>usb 2-1: configuration #1 chosen from 1 choice
><6>usb 2-1: New USB device found, idVendor=045e, idProduct=071d
><6>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 2-1: Product: Microsoft® 2.4GHz Transceiver V1.0
><6>usb 2-1: Manufacturer: Microsoft
><6>usbcore: registered new interface driver hiddev
><6>input: Microsoft Microsoft® 2.4GHz Transceiver V1.0 as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input0
><6>input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver V1.0] on usb-0000:00:04.0-1
><6>input: Microsoft Microsoft® 2.4GHz Transceiver V1.0 as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.1/input/input1
><6>input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver V1.0] on usb-0000:00:04.0-1
><6>usbcore: registered new interface driver usbhid
><6>usbhid: v2.6:USB HID core driver
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda5, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>udevd version 128 started
><6>Adding 4200956k swap on /dev/sda6.  Priority:-1 extents:1 across:4200956k
><6>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
><6>rtc0: alarms up to one year, y3k, hpet irqs
><6>device-mapper: uevent: version 1.0.3
><6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
><6>loop: module loaded
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda7, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><4>fuse init (API version 7.9)
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sdb1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Mon Jan 19 13:00:24 2009
>
>Trying manual resume from /dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part6
>Invoking userspace resume from /dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part6
>resume: libgcrypt version: 1.4.1
>Trying manual resume from /dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part6
>Invoking in-kernel resume from /dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part6
>Waiting for device /dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 to appear:  ok
>fsck 1.41.1 (01-Sep-2008)
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 
>/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5: recovering journal
>/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5: Clearing orphaned inode 2007191 (uid=0, gid=0, mode=0100600, size=217016)
>/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5: Clearing orphaned inode 2007175 (uid=60, gid=108, mode=0100600, size=0)
>/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5: Clearing orphaned inode 2007171 (uid=60, gid=108, mode=0100600, size=0)
>/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5: Clearing orphaned inode 2007166 (uid=60, gid=108, mode=0100600, size=0)
>/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5: Clearing orphaned inode 2007164 (uid=60, gid=108, mode=0100600, size=0)
>/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5: Clearing orphaned inode 2007155 (uid=60, gid=108, mode=0100600, size=0)
>/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5: clean, 665973/2957312 files, 6124553/11797726 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Mon Jan 19 14:00:31 2009
>
>done
>Starting udevd: done
>Loading drivers, configuring devices: failed
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>doneSetting up the hardware clockdone
>Activating device mapper...
>done
>Starting MD Raid unused
>Checking file systems...
>fsck 1.41.1 (01-Sep-2008)
>/dev/disk/by-id/scsi-SATA_WDC_WD6400AAKS-_WD-WMASY2641335-part7: recovering journal
>/dev/disk/by-id/scsi-SATA_WDC_WD6400AAKS-_WD-WMASY2641335-part7: clean, 378154/32776192 files, 85201739/131072326 blocks
>/dev/disk/by-id/scsi-SATA_SAMSUNG_HD501LJS0MUJ1EQ164247-part1: recovering journal
>/dev/disk/by-id/scsi-SATA_SAMSUNG_HD501LJS0MUJ1EQ164247-part1: clean, 454/30531584 files, 60494976/122096000 blocks
>donedone
>Mounting local file systems...
>/proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>mount: /sys not mounted already, or bad option
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda7 on /home type ext3 (rw)
>/dev/sdb1 on /media/data type ext3 (rw)
>done ...unused
>Fuse filesystem already availabledone
>Mounting fuse control filesystemfailed
>Configuring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>Configured serial ports
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>net.ipv4.conf.default.promote_secondaries = 1
>net.ipv4.conf.all.promote_secondaries = 1
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>Activating remaining swap-devices in /etc/fstab...
>doneCreating /var/log/boot.msg
>done<notice>killproc: kill(827,29)
>Turning quota on
>Checking quotas. This may take some time.
>done
>mount: mount point /sys/kernel/security does not exist
>Mounting securityfs on /sys/kernel/security failed
>Loading AppArmor module failed
>Setting up hostname 'linux-oxf2'done
>Setting up loopback interface Interface lo is not available
>failed
>System Boot Control: The system has been set up
>Failed features: boot.udev boot.fuse boot.apparmor
>Skipped features: boot.md boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>/etc/init.d/boot.local: line 16: /sys/class/scsi_host/host0/link_power_management_policy: No such file or directory
>/etc/init.d/boot.local: line 17: /sys/class/scsi_host/host1/link_power_management_policy: No such file or directory
>/etc/init.d/boot.local: line 18: /sys/class/scsi_host/host2/link_power_management_policy: No such file or directory
>/etc/init.d/boot.local: line 19: /sys/class/scsi_host/host3/link_power_management_policy: No such file or directory
>/etc/init.d/boot.local: line 20: /sys/class/scsi_host/host4/link_power_management_policy: No such file or directory
>/etc/init.d/boot.local: line 21: /sys/class/scsi_host/host5/link_power_management_policy: No such file or directory
>/etc/init.d/boot.local: line 22: /sys/class/scsi_host/host6/link_power_management_policy: No such file or directory
>/etc/init.d/boot.local: line 24: /sys/module/snd_ac97_codec/parameters/power_save: No such file or directory
>done<notice>killproc: kill(827,3)
>
>INIT: Entering runlevel: 5
>
>
>
>Boot logging started on /dev/tty1(/dev/console) at Mon Jan 19 13:00:40 2009
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/sbin/klogd ]
>done
>Starting D-Bus daemondone
>Starting acpid <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/sbin/acpid ]
>done
>Loading CPUFreq modules (CPUFreq not supported)
>Starting HAL daemondone
>Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 SPLASHCFG= PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=25 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=Oxygen_Black WINDOWMANAGER=/usr/bin/kde SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
>done
>Starting Firewall Initialization (phase 1 of 2) done
>ls: cannot access /sys/class/net/: No such file or directory
>Setting up (localfs) network interfaces:
>Interface lo is not available
>failedWaiting for mandatory devices:  eth0 __NSC__
>19 18 17 16 15 Checking/updating CPU microcode unused
>Initializing random number generatordone
>TurboPrint daemon started
>TP-Daemon Version 2.06-1
>Debug Level set to 0
><notice>startproc: execve (/usr/sbin/hddtemp) [ /usr/sbin/hddtemp -d -f /etc/hddtemp.db -p 7634 /dev/hda ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/sbin/hddtemp ]
>Starting hddtemp daemon for /dev/hdadone
>14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 
>    eth0                                No interface found
>failedSetting up service (localfs) network  .  .  .  .  .  .  .  .  .  .failed
><notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/sbin/auditd ]
><notice>startproc: execve (/usr/bin/gdomap) [ /usr/bin/gdomap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/bin/gdomap ]
><notice>startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/sbin/rpcbind ]
>Starting gdomap: 
>done
>Starting auditd done
>Starting rpcbind done
>Not starting NFS client services - no NFS found in /etc/fstab:unused
>Starting VirtualBox kernel moduledone
>Loading console font lat9w-16.psfu  -m trivial G0:loadable
>doneLoading keymap assuming iso-8859-15 euro
>Loading /usr/share/kbd/keymaps/i386/qwertz/de-latin1-nodeadkeys.map.gz
>doneLoading compose table latin1.adddone
>Start Unicode mode
>done<notice>checkproc: /opt/kde3/bin/kdm 1668
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
><notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
>Starting irqbalance failed
>Starting cupsddone
>Starting Avahi daemon done
><notice>startproc: execve (/usr/bin/freshclam) [ /usr/bin/freshclam -d ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/bin/freshclam ]
>Starting Clam AntiVirus database update daemon done
>Starting java.binfmt_misc done
><notice>startproc: execve (/usr/sbin/faxq) [ /usr/sbin/faxq ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/sbin:/bin:/usr/bin:/etc:/usr/local/bin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/sbin/faxq ]
>Starting Avahi DNS Configuration daemon done
><notice>startproc: execve (/usr/lib/fax/hfaxd) [ /usr/lib/fax/hfaxd -i hylafax -o 4557 -s 444 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/sbin:/bin:/usr/bin:/etc:/usr/local/bin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/lib/fax/hfaxd ]
>Starting service HylaFAXdone
>Starting lircd (/dev/input/event5)<notice>startproc: execve (/usr/sbin/lircd) [ /usr/sbin/lircd -H devinput -d /dev/input/event5 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/sbin/lircd ]
>done
>Starting up sensors: done
>..dead
>Starting service MySQL done
>Starting MythTV backenddone
>ls: cannot access /sys/class/net/: No such file or directory
>Setting up (remotefs) network interfaces:
>Interface lo is not available
>failedSetting up service (remotefs) network  .  .  .  .  .  .  .  .  .  .done
><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>Starting Name Service Cache Daemondone
><notice>startproc: execve (/usr/sbin/rpc.idmapd) [ /usr/sbin/rpc.idmapd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/sbin/rpc.idmapd ]
><notice>startproc: execve (/usr/sbin/rpc.mountd) [ /usr/sbin/rpc.mountd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/sbin/rpc.mountd ]
><notice>startproc: execve (/usr/sbin/rpc.statd) [ /usr/sbin/rpc.statd --no-notify ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/sbin/rpc.statd ]
>Starting mail service (Postfix)failed
><notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>Starting CRON daemondone
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6400AAKS-75A7B0_WD-WMASY2641335-part5 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Starting SSH daemondone
>Starting smartd done
>Starting kernel based NFS server: idmapd mountd statd nfsd
>INIT: Switching to runlevel: 6
>
>
>
>INIT: Sending processes the TERM signal
>
>
>Master Resource Control: runlevel 5 has been reached
><notice>killproc: kill(1504,3)
>
>Boot logging started on /dev/tty1(/dev/console) at Mon Jan 19 13:02:40 2009
>
>Master Resource Control: previous runlevel: 5, switching to runlevel: 6
><notice>killproc: kill(3072,15)
><notice>killproc: kill(2554,15)
><notice>killproc: kill(3110,15)
><notice>killproc: kill(2520,15)
>Shutting down CRON daemondone
><notice>killproc: kill(3002,15)
>Shutting down Clam AntiVirus database update daemon done
>Shutting down smartd done
>Shutting down cupsddone
>Shutting MythTV backenddone
>Shutting down the Firewall skipped
><notice>killproc: kill(1668,15)
>Shutting down Avahi DNS Configuration daemon done
>Shutting down mail service (Postfix)done
><notice>killproc: kill(2205,15)
>Shutting down service kdmdone
>Stopping gdomap: 
>done
>Shutting down irqbalance done
>Shutting down auditd done
>Shutting down java.binfmt_misc done
><notice>killproc: kill(2585,15)
>Shutting down service HylaFAXdone
>Shutting down Avahi daemon done
>Shutting down service kdmdone
>Shutting down lircd <notice>killproc: kill(2619,15)
>done
>Shutting down sensors: done
><notice>killproc: kill(3108,15)
><notice>Shutting down kernel based NFS server: nfsddone
>killproc: kill(1548,15)
>Shutting down SSH daemondone
>Shutting down acpid done
>Stopping VirtualBox kernel moduledone
><notice>killproc: kill(2992,15)
>Saving random seeddone
>Shutting down Name Service Cache Daemondone
>tp-daemon to client communication / select: Interrupted system call
>TurboPrint daemon stopped
>done
>Shutting down hddtemp daemon for /dev/hdadone
>ls: cannot access /sys/class/net/: No such file or directory
>Shutting down (remotefs) network interfaces:
>Shutting down service MySQL <notice>killproc: kill(1565,15)
>Shutting down HAL daemondone
>done
>Not stopping NFS client services:unused
>Shutting down rpcbind <notice>killproc: kill(2221,15)
>done
>Shutting down syslog services<notice>killproc: kill(1527,15)
><notice>killproc: kill(1530,15)
>done
>ls: cannot access /sys/class/net/: No such file or directory
>Shutting down (localfs) network interfaces:
>Shutting down service (localfs) network  .  .  .  .  .  .  .  .  .done
>Shutting down D-Bus daemon<notice>killproc: kill(1538,15)
>done
><notice>killproc: kill(3262,3)

Actions: View

Attachments on bug 466484: 265643 | 265645 | 265689 | 265691 | 265705 | 265992 | 266171 | 266172 | 266173 | 266174 | 267063 | 267289 | 267291 | 267579 | 267581 | 269096 | 274659 | 274963 | 278280 | 278281 | 278282 | 278284 | 278423 | 278425 | 283526 | 283527 | 283820 | 283822 | 283824 | 284364 | 284365 | 284642 | 285112 | 285113