Attachment 267514 Details for Bug 458966

dmesg output from KOTD

dmesg_2.6.27.13-1-debug (text/plain), 46.42 KB, created by David Solbach on 2009-01-25 18:00:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Solbach

Created: 2009-01-25 18:00:23 UTC

Size: 46.42 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27.13-1-debug (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 143290] (SUSE Linux) ) #1 SMP 2009-01-25 02:07:35 +0100
>Command line: root=/dev/disk/by-id/ata-SAMSUNG_SP1614C_0696J1FX314110-part1 resume=/dev/disk/by-id/ata-SAMSUNG_SP1614C_0696J1FX314110-part3 splash=silent showopts vga=0x31a
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>DMI 2.4 present.
>Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
>last_pfn = 0x7fee0 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
> 0000000000 - 007fe00000 page 2M
> 007fe00000 - 007fee0000 page 4k
>kernel direct mapping tables up to 7fee0000 @ 10000-14000
>last_map_addr: 7fee0000 end: 7fee0000
>RAMDISK: 374fe000 - 37fefb70
>ACPI: RSDP 000F7720, 0024 (r2 Nvidia)
>ACPI: XSDT 7FEE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: FACP 7FEEAC00, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FEE3280, 7908 (r1 NVIDIA AWRDACPI     1000 MSFT  3000000)
>ACPI: FACS 7FEE0000, 0040
>ACPI: SSDT 7FEEAE40, 030E (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: HPET 7FEEB1C0, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
>ACPI: MCFG 7FEEB240, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: APIC 7FEEAD40, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: Local APIC address 0xfee00000
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fee0000
>Bootmem setup node 0 0000000000000000-000000007fee0000
>  NODE_DATA [0000000000012000 - 0000000000029fff]
>  bootmap [000000000002a000 -  0000000000039fdf] pages 10
>(6 early reservations) ==> bootmem [0000000000 - 007fee0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000c53a90]    TEXT DATA BSS ==> [0000200000 - 0000c53a90]
>  #3 [00374fe000 - 0037fefb70]          RAMDISK ==> [00374fe000 - 0037fefb70]
>  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #5 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
>found SMP MP-table at [ffff8800000f5980] 000f5980
> [ffffe20000000000-ffffe200023fffff] PMD -> [ffff880001200000-ffff8800035fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007fee0
>On node 0 totalpages: 523887
>  DMA zone: 1164 pages, LIFO batch:0
>  DMA32 zone: 510765 pages, LIFO batch:31
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>ACPI: HPET id: 0x10de8201 base: 0xfefff000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
>PERCPU: Allocating 61984 bytes of per cpu data
>NR_CPUS: 512, nr_cpu_ids: 4, nr_node_ids 1
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 511929
>Policy zone: DMA32
>Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_SP1614C_0696J1FX314110-part1 resume=/dev/disk/by-id/ata-SAMSUNG_SP1614C_0696J1FX314110-part3 splash=silent showopts vga=0x31a
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PIT calibration value
>Detected 3013.843 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 590e000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Memory: 2036144k/2096000k available (2929k kernel code, 59404k reserved, 3230k data, 828k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.68 BogoMIPS (lpj=12055372)
>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
>Security Framework initialized
>AppArmor: AppArmor initialized
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys debug
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>tseg: 007ff00000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>using C1E aware idle routine
>ACPI: Core revision 20080609
>ACPI: Checking initramfs for custom DSDT
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 1169 Objects with 98 Devices 369 Methods 44 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
>Using local APIC timer interrupts.
>APIC timer calibration result 12557738
>Detected 12.557 MHz APIC timer.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6027.72 BogoMIPS (lpj=12055450)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
>Brought up 2 CPUs
>Total of 2 processors activated (12055.41 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>net_namespace: 2208 bytes
>NET: Registered protocol family 16
>node 0 link 0: io port [9000, ffff]
>TOM: 0000000080000000 aka 2048M
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [80000000, efffffff]
>node 0 link 0: mmio [f4000000, fe02ffff]
>node 0 link 0: mmio [f0000000, f02fffff]
>bus: [00,02] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [a0000, bffff]
>bus: 00 index 2 mmio: [80000000, f3ffffff]
>bus: 00 index 3 mmio: [f4000000, fcffffffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>PCI: MCFG area at f0000000 reserved in E820
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>PCI: Using configuration type 1 for base access
>perfmon: version 2.82
>perfmon: CPU hotplug support enabled
>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 20 to 5F [_GPE] 8 regs on int 0x9
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:.....................................................................................................................................................................................
>Initialized 39/44 Regions 11/11 Fields 40/40 Buffers 91/103 Packages (1186 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:...
>Executed 3 _INI methods requiring 1 _STA executions (examined 105 objects)
>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 0 Runtime GPEs in this block
>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 1 Runtime GPEs in this block
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: 0000:00:01.1 reg 10 io port: [fc00, fc3f]
>PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f]
>PCI: 0000:00:01.1 reg 24 io port: [1c40, 1c7f]
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
>pci 0000:00:02.0: supports D1
>pci 0000:00:02.0: supports D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff]
>pci 0000:00:02.1: supports D1
>pci 0000:00:02.1: supports D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>PCI: 0000:00:04.0 reg 20 io port: [f000, f00f]
>PCI: 0000:00:05.0 reg 10 io port: [9f0, 9f7]
>PCI: 0000:00:05.0 reg 14 io port: [bf0, bf3]
>PCI: 0000:00:05.0 reg 18 io port: [970, 977]
>PCI: 0000:00:05.0 reg 1c io port: [b70, b73]
>PCI: 0000:00:05.0 reg 20 io port: [dc00, dc0f]
>PCI: 0000:00:05.0 reg 24 32bit mmio: [fe02d000, fe02dfff]
>PCI: 0000:00:05.1 reg 10 io port: [9e0, 9e7]
>PCI: 0000:00:05.1 reg 14 io port: [be0, be3]
>PCI: 0000:00:05.1 reg 18 io port: [960, 967]
>PCI: 0000:00:05.1 reg 1c io port: [b60, b63]
>PCI: 0000:00:05.1 reg 20 io port: [c800, c80f]
>PCI: 0000:00:05.1 reg 24 32bit mmio: [fe02c000, fe02cfff]
>PCI: 0000:00:05.2 reg 10 io port: [c400, c407]
>PCI: 0000:00:05.2 reg 14 io port: [c000, c003]
>PCI: 0000:00:05.2 reg 18 io port: [bc00, bc07]
>PCI: 0000:00:05.2 reg 1c io port: [b800, b803]
>PCI: 0000:00:05.2 reg 20 io port: [b400, b40f]
>PCI: 0000:00:05.2 reg 24 32bit mmio: [fe02b000, fe02bfff]
>PCI: 0000:00:06.1 reg 10 32bit mmio: [fe024000, fe027fff]
>pci 0000:00:06.1: PME# supported from D3hot D3cold
>pci 0000:00:06.1: PME# disabled
>PCI: 0000:00:08.0 reg 10 32bit mmio: [fe02a000, fe02afff]
>PCI: 0000:00:08.0 reg 14 io port: [b000, b007]
>PCI: 0000:00:08.0 reg 18 32bit mmio: [fe029000, fe0290ff]
>PCI: 0000:00:08.0 reg 1c 32bit mmio: [fe028000, fe02800f]
>pci 0000:00:08.0: supports D1
>pci 0000:00:08.0: supports D2
>pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:08.0: PME# disabled
>pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0f.0: PME# disabled
>PCI: 0000:01:06.0 reg 10 io port: [ac00, acff]
>PCI: 0000:01:06.0 reg 14 32bit mmio: [fcfff000, fcffffff]
>PCI: 0000:01:06.0 reg 30 32bit mmio: [fcfe0000, fcfeffff]
>pci 0000:01:06.0: supports D1
>pci 0000:01:06.0: supports D2
>pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:01:06.0: PME# disabled
>PCI: 0000:01:07.0 reg 10 32bit mmio: [f9000000, f9ffffff]
>PCI: 0000:01:07.2 reg 10 32bit mmio: [fb000000, fbffffff]
>PCI: 0000:01:07.4 reg 10 32bit mmio: [fa000000, faffffff]
>pci 0000:00:06.0: transparent bridge
>PCI: bridge 0000:00:06.0 io port: [a000, afff]
>PCI: bridge 0000:00:06.0 32bit mmio: [f9000000, fcffffff]
>PCI: 0000:02:00.0 reg 10 32bit mmio: [f6000000, f6ffffff]
>PCI: 0000:02:00.0 reg 14 64bit mmio: [e0000000, efffffff]
>PCI: 0000:02:00.0 reg 1c 64bit mmio: [f7000000, f7ffffff]
>PCI: 0000:02:00.0 reg 24 io port: [9c00, 9c7f]
>PCI: 0000:02:00.0 reg 30 32bit mmio: [f8fe0000, f8ffffff]
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:0f.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:0f.0 io port: [9000, 9fff]
>PCI: bridge 0000:00:0f.0 32bit mmio: [f6000000, f8ffffff]
>PCI: bridge 0000:00:0f.0 64bit mmio pref: [e0000000, efffffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>tracer: 1286 pages allocated for 65536 entries of 80 bytes
>   actual entries 65586
>Switched to high resolution mode on CPU 0
>AppArmor: AppArmor Filesystem Enabled
>ACPI: RTC can wake from S4
>Switched to high resolution mode on CPU 1
>system 00:01: ioport range 0x1000-0x107f has been reserved
>system 00:01: ioport range 0x1080-0x10ff has been reserved
>system 00:01: ioport range 0x1400-0x147f has been reserved
>system 00:01: ioport range 0x1480-0x14ff has been reserved
>system 00:01: ioport range 0x1800-0x187f has been reserved
>system 00:01: ioport range 0x1880-0x18ff has been reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x801 has been reserved
>system 00:02: ioport range 0x290-0x297 has been reserved
>system 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:0c: iomem range 0xcde00-0xcffff has been reserved
>system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0c: iomem range 0xfefff000-0xfefff0ff could not be reserved
>system 00:0c: iomem range 0x7fee0000-0x7fefffff could not be reserved
>system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
>system 00:0c: iomem range 0x100000-0x7fedffff could not be reserved
>system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved
>system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved
>system 00:0c: iomem range 0xfff90000-0xfffbffff could not be reserved
>system 00:0c: iomem range 0xfffed000-0xfffeffff could not be reserved
>pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:06.0:   IO window: 0xa000-0xafff
>pci 0000:00:06.0:   MEM window: 0xf9000000-0xfcffffff
>pci 0000:00:06.0:   PREFETCH window: 0x00000080000000-0x000000800fffff
>pci 0000:00:0f.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:0f.0:   IO window: 0x9000-0x9fff
>pci 0000:00:0f.0:   MEM window: 0xf6000000-0xf8ffffff
>pci 0000:00:0f.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
>pci 0000:00:06.0: setting latency timer to 64
>pci 0000:00:0f.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [a000, afff]
>bus: 01 index 1 mmio: [f9000000, fcffffff]
>bus: 01 index 2 mmio: [80000000, 800fffff]
>bus: 01 index 3 io port: [0, ffff]
>bus: 01 index 4 mmio: [0, ffffffffffffffff]
>bus: 02 index 0 io port: [9000, 9fff]
>bus: 02 index 1 mmio: [f6000000, f8ffffff]
>bus: 02 index 2 mmio: [e0000000, efffffff]
>bus: 02 index 3 mmio: [0, 0]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Unpacking initramfs... done
>Freeing initrd memory: 11206k freed
>Initializing RT-Tester: OK
>audit: initializing netlink socket (disabled)
>type=2000 audit(1232908798.132:1): initialized
>Testing tracer sched_switch: PASSED
>Testing tracer ftrace: PASSED
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 999
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>perfmon: added sampling format default
>pci 0000:00:05.0: Enabling HT MSI Mapping
>pci 0000:00:05.1: Enabling HT MSI Mapping
>pci 0000:00:05.2: Enabling HT MSI Mapping
>pci 0000:00:06.0: Enabling HT MSI Mapping
>pci 0000:00:06.1: Enabling HT MSI Mapping
>pci 0000:00:08.0: Enabling HT MSI Mapping
>pci 0000:00:0f.0: Enabling HT MSI Mapping
>pci 0000:02:00.0: Boot video device
>pcieport-driver 0000:00:0f.0: setting latency timer to 64
>pcieport-driver 0000:00:0f.0: found MSI capability
>pci_express 0000:00:0f.0:pcie00: allocate port service
>pci_express 0000:00:0f.0:pcie03: allocate port service
>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20004a80000, using 10240k, total 262144k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 113709 bytes
>bootsplash: ...found (1280x1024, 43709 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>hpet_resources: 0xfefff000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver8 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>registered taskstats version 1
>Freeing unused kernel memory: 828k freed
>Write protecting the kernel read-only data: 5208k
>processor ACPI_CPU:00: registered as cooling_device0
>processor ACPI_CPU:01: registered as cooling_device1
>ACPI: Expecting a [Reference] package element, found type 0
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (40 C)
>ACPI: No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>pata_amd 0000:00:04.0: version 0.3.10
>pata_amd 0000:00:04.0: setting latency timer to 64
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata2: port disabled. ignoring.
>sata_nv 0000:00:05.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:05.0: Using SWNCQ mode
>sata_nv 0000:00:05.0: setting latency timer to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23
>ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-7: SAMSUNG SP1614C, SW100-27, max UDMA7
>ata3.00: 312581808 sectors, multi 1: LBA48 
>ata3.00: configured for UDMA/133
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133
>ata4.00: 490234752 sectors, multi 1: LBA48 NCQ (not used)
>ata4.00: configured for UDMA/133
>isa bounce pool size: 16 pages
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP1614C  SW10 PQ: 0 ANSI: 5
>scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6L250S0   BANC PQ: 0 ANSI: 5
>ata4.00: Disabling SWNCQ mode (depth 1)
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
>sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
>sata_nv 0000:00:05.1: Using SWNCQ mode
>sata_nv 0000:00:05.1: setting latency timer to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22
>ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
>ata5.00: configured for UDMA/100
>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH20NS10  EL00 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
>sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
>sata_nv 0000:00:05.2: Using SWNCQ mode
>sata_nv 0000:00:05.2: setting latency timer to 64
>scsi6 : sata_nv
>scsi7 : sata_nv
>ata7: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21
>ata8: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21
>Uniform Multi-Platform E-IDE driver
>fan PNP0C0B:00: registered as cooling_device2
>ACPI: Fan [FAN] (on)
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>udevd version 128 started
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160GB/149GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160GB/149GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
> sda1 sda2 sda3 sda4 <<4>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
> sda5<6>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
> sda6 >
>hub 1-0:1.0: 10 ports detected
>sd 2:0:0:0: [sda] Attached SCSI disk
>sd 3:0:0:0: [sdb] 490234752 512-byte hardware sectors: (251GB/233GiB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdb] 490234752 512-byte hardware sectors: (251GB/233GiB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 3:0:0:0: [sdb] Attached SCSI disk
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27.13-1-debug ohci_hcd
>usb usb1: SerialNumber: 0000:00:02.0
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
>ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000
>usb 1-4: new low speed USB device using ohci_hcd and address 2
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>hub 1-0:1.0: unable to enumerate USB device on port 4
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27.13-1-debug ehci_hcd
>usb usb2: SerialNumber: 0000:00:02.1
>PM: Starting manual resume from disk
>usb 2-6: new high speed USB device using ehci_hcd and address 4
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 2-6: configuration #1 chosen from 1 choice
>hub 2-6:1.0: USB hub found
>hub 2-6:1.0: 4 ports detected
>usb 2-6: New USB device found, idVendor=0409, idProduct=0059
>usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-4: new low speed USB device using ohci_hcd and address 3
>usb 1-4: configuration #1 chosen from 1 choice
>usb 1-4: New USB device found, idVendor=046d, idProduct=c00c
>usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-4: Product: USB Optical Mouse
>usb 1-4: Manufacturer: Logitech
>usb 1-5: new low speed USB device using ohci_hcd and address 4
>usb 1-5: configuration #1 chosen from 1 choice
>usb 1-5: New USB device found, idVendor=046d, idProduct=c30e
>usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-5: Product: HID compliant keyboard
>usb 1-5: Manufacturer: Logitech
>udevd version 128 started
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>sd 3:0:0:0: Attached scsi generic sg1 type 0
>scsi 4:0:0:0: Attached scsi generic sg2 type 5
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>IT8716 SuperIO detected.
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
>forcedeth 0000:00:08.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>natsemi dp8381x driver, version 2.1, Sept 11, 2006
>  originally by Donald Becker <becker@scyld.com>
>  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
>input: PC Speaker as /devices/platform/pcspkr/input/input0
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, hpet irqs
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button (CM) [PWRB]
>ppdev: user-space parallel port driver
>usbcore: registered new interface driver hiddev
>input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input3
>forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:ec:ad:d3
>forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM01 [0x1c40-0x1c45]
>ACPI: Device needs an ACPI driver
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>vendor=10de device=0370
>natsemi 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
>natsemi eth1: NatSemi DP8381[56] at 0xfcfff000 (0000:01:06.0), 00:a0:cc:a1:aa:36, IRQ 16, port TP.
>input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:02.0-4
>input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb1/1-5/1-5:1.0/input/input4
>input,hidraw1: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:02.0-5
>input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb1/1-5/1-5:1.1/input/input5
>input,hidraw2: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:02.0-5
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
>HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:06.1: setting latency timer to 64
>Linux video capture interface: v2.00
>ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
>cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
>Found: SST 49LF040B
>ck804xrom @fff80000: Found 1 x8 devices at 0x0 in 8-bit bank
>cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
>using fwh lock/unlock method
>number of JEDEC chips: 1
>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
>cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected]
>cx88[0]: TV tuner type 4, Radio tuner type -1
>cx88[0]: Test OK
>tveeprom 2-0050: Hauppauge model 90002, rev C176, serial# 82146
>tveeprom 2-0050: MAC address is 00-0D-FE-01-40-E2
>tveeprom 2-0050: tuner model is Thompson DTT7592 (idx 76, type 4)
>tveeprom 2-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
>tveeprom 2-0050: audio processor is None (idx 0)
>tveeprom 2-0050: decoder processor is CX882 (idx 25)
>tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter
>cx88[0]: hauppauge eeprom: model=90002
>input: cx88 IR (Hauppauge Nova-T DVB-T as /devices/pci0000:00/0000:00:06.0/0000:01:07.2/input/input6
>cx88[0]/2: cx2388x 8802 Driver Manager
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>vendor=10de device=0370
>cx88-mpeg driver manager 0000:01:07.2: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
>cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 17, latency: 32, mmio: 0xfb000000
>vendor=10de device=0370
>cx8800 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
>cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 17, latency: 32, mmio: 0xf9000000
>cx88[0]/0: registered device video0 [v4l2]
>cx88[0]/0: registered device vbi0
>cx88/2: cx2388x dvb driver version 0.0.6 loaded
>cx88/2: registering cx8802 driver, type: dvb access: shared
>cx88[0]/2: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18]
>cx88[0]/2: cx2388x based DVB/ATSC card
>DVB: registering new adapter (cx88[0])
>DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
>Adding 1052248k swap on /dev/sda3.  Priority:-1 extents:1 across:1052248k
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>REISERFS (device sdb1): found reiserfs format "3.6" with standard journal
>REISERFS (device sdb1): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device sdb1): journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sdb1): checking transaction log (sdb1)
>REISERFS (device sdb1): Using r5 hash to sort names
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>type=1505 audit(1232905224.639:2): operation="profile_load" name="/bin/ping" name2="default" pid=1995
>type=1505 audit(1232905224.695:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1996
>type=1505 audit(1232905224.751:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1997
>type=1505 audit(1232905224.803:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1998
>type=1505 audit(1232905224.851:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1999
>type=1505 audit(1232905224.911:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=2000
>type=1505 audit(1232905225.051:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=2024
>type=1505 audit(1232905225.218:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=2036
>type=1505 audit(1232905225.323:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=2058
>type=1505 audit(1232905225.391:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=2062
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x8
>powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0xa
>powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xc
>powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xe
>powernow-k8:    4 : fid 0xe (2200 MHz), vid 0x10
>powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
>powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
>powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
>Clocksource tsc unstable (delta = -169230013 ns)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>NET: Registered protocol family 17
>eth0: no IPv6 routers present
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=92.77.11.156 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=124 ID=37380 DF PROTO=TCP SPT=14355 DPT=6881 WINDOW=16384 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=90.224.39.2 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=6082 DF PROTO=TCP SPT=63423 DPT=6881 WINDOW=64512 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=85.225.144.12 DST=192.168.2.101 LEN=52 TOS=0x00 PREC=0x00 TTL=113 ID=19691 DF PROTO=TCP SPT=56994 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 OPT (020405AC0103030201010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=80.212.203.157 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=33569 DF PROTO=TCP SPT=62867 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405A001010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=90.224.39.2 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=6673 DF PROTO=TCP SPT=63423 DPT=6881 WINDOW=64512 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=24.36.64.73 DST=192.168.2.101 LEN=52 TOS=0x00 PREC=0x00 TTL=119 ID=1032 DF PROTO=TCP SPT=62342 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 OPT (020405AC0103030201010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=78.42.254.5 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=64713 DF PROTO=TCP SPT=61315 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=84.62.153.240 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=60 ID=54362 DF PROTO=TCP SPT=61518 DPT=6881 WINDOW=32767 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=82.240.149.50 DST=192.168.2.101 LEN=52 TOS=0x00 PREC=0x00 TTL=119 ID=13583 DF PROTO=TCP SPT=53335 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 OPT (020405AC0103030201010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=95.116.80.237 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=121 ID=19331 DF PROTO=TCP SPT=1116 DPT=6881 WINDOW=16384 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=77.186.90.133 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=57477 DF PROTO=TCP SPT=2857 DPT=6881 WINDOW=32767 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=77.105.200.138 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=19189 DF PROTO=TCP SPT=51809 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>usb 1-5: USB disconnect, address 4
>usb 1-5: new low speed USB device using ohci_hcd and address 5
>usb 1-5: configuration #1 chosen from 1 choice
>input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb1/1-5/1-5:1.0/input/input7
>input,hidraw1: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:02.0-5
>input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb1/1-5/1-5:1.1/input/input8
>input,hidraw2: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:02.0-5
>usb 1-5: New USB device found, idVendor=046d, idProduct=c30e
>usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-5: Product: HID compliant keyboard
>usb 1-5: Manufacturer: Logitech
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=81.231.19.167 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=24730 DF PROTO=TCP SPT=63269 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>usb 2-6.4: new high speed USB device using ehci_hcd and address 5
>usb 2-6.4: configuration #1 chosen from 1 choice
>usb 2-6.4: New USB device found, idVendor=0000, idProduct=0000
>usb 2-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-6.4: Product:                            
>usb 2-6.4: Manufacturer:                
>usb 2-6.4: SerialNumber: S1GAJ16PC08640      
>Initializing USB Mass Storage driver...
>scsi8 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>scsi 8:0:0:0: Direct-Access              HS06SHR               PQ: 0 ANSI: 0 CCS
>sd 8:0:0:0: [sdc] 117266688 512-byte hardware sectors: (60.0GB/55.9GiB)
>sd 8:0:0:0: [sdc] Write Protect is off
>sd 8:0:0:0: [sdc] Mode Sense: 00 00 00 00
>sd 8:0:0:0: [sdc] Assuming drive cache: write through
>sd 8:0:0:0: [sdc] 117266688 512-byte hardware sectors: (60.0GB/55.9GiB)
>sd 8:0:0:0: [sdc] Write Protect is off
>sd 8:0:0:0: [sdc] Mode Sense: 00 00 00 00
>sd 8:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
>sd 8:0:0:0: [sdc] Attached SCSI disk
>sd 8:0:0:0: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 2-6.4: USB disconnect, address 5
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=80.216.239.170 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=11512 DF PROTO=TCP SPT=60641 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>usb 1-5: USB disconnect, address 5
>usb 2-6.2: new low speed USB device using ehci_hcd and address 6
>usb 2-6.2: configuration #1 chosen from 1 choice
>input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:02.1/usb2/2-6/2-6.2/2-6.2:1.0/input/input9
>input,hidraw1: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:02.1-6.2
>input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:02.1/usb2/2-6/2-6.2/2-6.2:1.1/input/input10
>input,hidraw2: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:02.1-6.2
>usb 2-6.2: New USB device found, idVendor=046d, idProduct=c30e
>usb 2-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-6.2: Product: HID compliant keyboard
>usb 2-6.2: Manufacturer: Logitech
>usb 2-6.1: new high speed USB device using ehci_hcd and address 7
>usb 2-6.1: configuration #1 chosen from 1 choice
>scsi9 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 7
>usb-storage: waiting for device to settle before scanning
>usb 2-6.1: New USB device found, idVendor=0000, idProduct=0000
>usb 2-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-6.1: Product:                            
>usb 2-6.1: Manufacturer:                
>usb 2-6.1: SerialNumber: S1GAJ16PC08640      
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=85.176.239.118 DST=192.168.2.101 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=30708 DF PROTO=TCP SPT=38260 DPT=6881 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405AC0402080A007203B70000000001030307) 
>usb 2-6.1: reset high speed USB device using ehci_hcd and address 7
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=78.42.254.5 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=42695 DF PROTO=TCP SPT=64837 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>usb 2-6.1: reset high speed USB device using ehci_hcd and address 7
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=77.248.173.137 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=8297 DF PROTO=TCP SPT=40334 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=86.32.216.50 DST=192.168.2.101 LEN=52 TOS=0x00 PREC=0x00 TTL=115 ID=722 DF PROTO=TCP SPT=2955 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405AC0103030101010402) 
>usb 2-6.1: reset high speed USB device using ehci_hcd and address 7
>usb 2-6.1: reset high speed USB device using ehci_hcd and address 7
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=91.66.151.223 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=37721 DF PROTO=TCP SPT=4168 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>usb 2-6.1: reset high speed USB device using ehci_hcd and address 7
>scsi 9:0:0:0: Device offlined - not ready after error recovery
>usb-storage: device scan complete
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=212.182.130.245 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=14733 DF PROTO=TCP SPT=19894 DPT=6881 WINDOW=64512 RES=0x00 SYN URGP=0 OPT (020404EC01010402) 
>usb 2-6.1: USB disconnect, address 7
>usb 2-6.2: USB disconnect, address 6
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=74.65.28.176 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=17255 DF PROTO=TCP SPT=54461 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>usb 1-5: new low speed USB device using ohci_hcd and address 6
>usb 1-5: configuration #1 chosen from 1 choice
>input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb1/1-5/1-5:1.0/input/input11
>input,hidraw1: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:02.0-5
>input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb1/1-5/1-5:1.1/input/input12
>input,hidraw2: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:02.0-5
>usb 1-5: New USB device found, idVendor=046d, idProduct=c30e
>usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-5: Product: HID compliant keyboard
>usb 1-5: Manufacturer: Logitech
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=95.114.3.227 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=6356 DF PROTO=TCP SPT=3086 DPT=6881 WINDOW=16384 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=71.109.29.228 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=19819 DF PROTO=TCP SPT=2523 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=80.216.206.74 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=116 ID=58384 DF PROTO=TCP SPT=3122 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=212.182.130.245 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=119 ID=18748 DF PROTO=TCP SPT=19939 DPT=6881 WINDOW=64512 RES=0x00 SYN URGP=0 OPT (020404EC01010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=24.99.171.207 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=108 ID=13446 DF PROTO=TCP SPT=52467 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:18:f3:ec:ad:d3:00:1a:2a:5e:e4:46:08:00 SRC=92.75.112.229 DST=192.168.2.101 LEN=48 TOS=0x00 PREC=0x00 TTL=124 ID=1722 DF PROTO=TCP SPT=2519 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405AC01010402)

Actions: View

Attachments on bug 458966: 260161 | 260162 | 260163 | 260164 | 260424 | 261679 | 267514 | 267723