Attachment 275153 Details for Bug 467268

lshal output when camera plugged in

camera_full_lshal_output.txt (text/plain), 166.48 KB, created by Pera Tamindzija on 2009-02-24 22:45:08 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pera Tamindzija

Created: 2009-02-24 22:45:08 UTC

Size: 166.48 KB

patch

obsolete

>
>Dumping 139 device(s) from the Global Device List:
>-------------------------------------------------
>udi = '/org/freedesktop/Hal/devices/computer'
>  info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
>  info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
>  info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
>  info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
>  info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
>  info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
>  info.capabilities = {'cpufreq_control'} (string list)
>  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
>  info.product = 'Computer'  (string)
>  info.subsystem = 'unknown'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
>  power_management.acpi.linux.version = '20080609'  (string)
>  power_management.can_hibernate = true  (bool)
>  power_management.can_suspend = true  (bool)
>  power_management.can_suspend_hybrid = true  (bool)
>  power_management.is_powersave_set = false  (bool)
>  power_management.type = 'acpi'  (string)
>  system.board.product = 'P5PE-VM'  (string)
>  system.board.serial = 'MB-1234567890'  (string)
>  system.board.vendor = 'ASUSTeK Computer Inc.'  (string)
>  system.board.version = 'Rev 1.00'  (string)
>  system.chassis.manufacturer = 'Chassis Manufacture'  (string)
>  system.chassis.type = 'Desktop'  (string)
>  system.firmware.release_date = '11/23/2006'  (string)
>  system.firmware.vendor = 'American Megatrends Inc.'  (string)
>  system.firmware.version = '1201'  (string)
>  system.formfactor = 'desktop'  (string)
>  system.hardware.primary_video.product = 545  (0x221)  (int)
>  system.hardware.primary_video.vendor = 4318  (0x10de)  (int)
>  system.hardware.product = 'System Product Name'  (string)
>  system.hardware.serial = 'System Serial Number'  (string)
>  system.hardware.uuid = '50FEA63D-9CFE-D511-AE1B-B2934401180E'  (string)
>  system.hardware.vendor = 'System manufacturer'  (string)
>  system.hardware.version = 'System Version'  (string)
>  system.kernel.machine = 'x86_64'  (string)
>  system.kernel.name = 'Linux'  (string)
>  system.kernel.version = '2.6.27.7-9-default'  (string)
>
>udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
>  access_control.file = '/dev/snd/seq'  (string)
>  access_control.type = 'sound'  (string)
>  alsa.device_file = '/dev/snd/seq'  (string)
>  alsa.type = 'sequencer'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'alsa', 'access_control'} (string list)
>  info.category = 'alsa'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'ALSA Sequencer Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'  (string)
>  linux.device_file = '/dev/snd/seq'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/virtual/sound/seq'  (string)
>
>udi = '/org/freedesktop/Hal/devices/platform_microcode'
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'Platform Device (microcode)'  (string)
>  info.subsystem = 'platform'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/platform_microcode'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'platform'  (string)
>  linux.sysfs_path = '/sys/devices/platform/microcode'  (string)
>  platform.id = 'microcode'  (string)
>
>udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
>  access_control.file = '/dev/snd/timer'  (string)
>  access_control.type = 'sound'  (string)
>  alsa.device_file = '/dev/snd/timer'  (string)
>  alsa.type = 'timer'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'alsa', 'access_control'} (string list)
>  info.category = 'alsa'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'ALSA Timer Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'  (string)
>  linux.device_file = '/dev/snd/timer'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/virtual/sound/timer'  (string)
>
>udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
>  info.capabilities = {'processor'} (string list)
>  info.category = 'processor'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1'  (string)
>  linux.acpi_path = '/proc/acpi/processor/CPU1'  (string)
>  linux.acpi_type = 1  (0x1)  (int)
>  linux.hotplug_type = 4  (0x4)  (int)
>  processor.can_throttle = true  (bool)
>  processor.number = 0  (0x0)  (int)
>
>udi = '/org/freedesktop/Hal/devices/acpi_CPU2'
>  info.capabilities = {'processor'} (string list)
>  info.category = 'processor'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU2'  (string)
>  linux.acpi_path = '/proc/acpi/processor/CPU2'  (string)
>  linux.acpi_type = 1  (0x1)  (int)
>  linux.hotplug_type = 4  (0x4)  (int)
>  processor.can_throttle = true  (bool)
>  processor.number = 1  (0x1)  (int)
>
>udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
>  info.capabilities = {'net', 'net.loopback'} (string list)
>  info.category = 'net.loopback'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'Loopback device Interface'  (string)
>  info.subsystem = 'net'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'net'  (string)
>  linux.sysfs_path = '/sys/devices/virtual/net/lo'  (string)
>  net.address = '00:00:00:00:00:00'  (string)
>  net.arp_proto_hw_id = 772  (0x304)  (int)
>  net.interface = 'lo'  (string)
>  net.linux.ifindex = 1  (0x1)  (int)
>  net.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
>
>udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
>  button.has_state = false  (bool)
>  button.type = 'power'  (string)
>  info.addons.singleton = {'hald-addon-input'} (string list)
>  info.capabilities = {'input', 'button'} (string list)
>  info.category = 'input'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'Power Button (CM)'  (string)
>  info.subsystem = 'input'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'  (string)
>  input.device = '/dev/input/event6'  (string)
>  input.product = 'Power Button (CM)'  (string)
>  linux.device_file = '/dev/input/event6'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'input'  (string)
>  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event6'  (string)
>
>udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
>  button.has_state = false  (bool)
>  button.type = 'power'  (string)
>  info.addons.singleton = {'hald-addon-input'} (string list)
>  info.capabilities = {'input', 'button'} (string list)
>  info.category = 'input'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'Power Button (FF)'  (string)
>  info.subsystem = 'input'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'  (string)
>  input.device = '/dev/input/event5'  (string)
>  input.product = 'Power Button (FF)'  (string)
>  linux.device_file = '/dev/input/event5'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'input'  (string)
>  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
>  info.linux.driver = 'system'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'System Board'  (string)
>  info.subsystem = 'pnp'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pnp'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:0c'  (string)
>  pnp.description = 'System Board'  (string)
>  pnp.id = 'PNP0c01'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
>  info.linux.driver = 'system'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
>  info.subsystem = 'pnp'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pnp'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:0b'  (string)
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
>  pnp.id = 'PNP0c02'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  info.linux.driver = 'serial'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = '16550A-compatible COM port'  (string)
>  info.subsystem = 'pnp'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pnp'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:0a'  (string)
>  pnp.description = '16550A-compatible COM port'  (string)
>  pnp.id = 'PNP0501'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
>  access_control.file = '/dev/ttyS0'  (string)
>  access_control.type = 'modem'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'serial', 'access_control'} (string list)
>  info.category = 'serial'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
>  info.product = '16550A-compatible COM port'  (string)
>  info.subsystem = 'tty'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'  (string)
>  linux.device_file = '/dev/ttyS0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'tty'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:0a/tty/ttyS0'  (string)
>  serial.device = '/dev/ttyS0'  (string)
>  serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
>  serial.port = 0  (0x0)  (int)
>  serial.type = 'platform'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0f03'
>  info.linux.driver = 'i8042 aux'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'Microsoft PS/2-style Mouse'  (string)
>  info.subsystem = 'pnp'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f03'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pnp'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:09'  (string)
>  pnp.description = 'Microsoft PS/2-style Mouse'  (string)
>  pnp.id = 'PNP0f03'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
>  info.linux.driver = 'i8042 kbd'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
>  info.subsystem = 'pnp'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pnp'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:08'  (string)
>  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
>  pnp.id = 'PNP0303'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
>  info.linux.driver = 'system'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
>  info.subsystem = 'pnp'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pnp'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:07'  (string)
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
>  pnp.id = 'PNP0c02'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  info.linux.driver = 'system'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
>  info.subsystem = 'pnp'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pnp'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:06'  (string)
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
>  pnp.id = 'PNP0c02'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
>  info.linux.driver = 'parport_pc'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'ECP printer port'  (string)
>  info.subsystem = 'pnp'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pnp'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:05'  (string)
>  pnp.description = 'ECP printer port'  (string)
>  pnp.id = 'PNP0401'  (string)
>
>udi = '/org/freedesktop/Hal/devices/ppdev_parport0'
>  info.capabilities = {'ppdev'} (string list)
>  info.category = 'ppdev'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0401'  (string)
>  info.product = 'Parallel Port Device'  (string)
>  info.subsystem = 'ppdev'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/ppdev_parport0'  (string)
>  linux.device_file = '/dev/parport0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'ppdev'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:05/ppdev/parport0'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'Math Coprocessor'  (string)
>  info.subsystem = 'pnp'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pnp'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:04'  (string)
>  pnp.description = 'Math Coprocessor'  (string)
>  pnp.id = 'PNP0c04'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'AT-style speaker sound'  (string)
>  info.subsystem = 'pnp'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pnp'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:03'  (string)
>  pnp.description = 'AT-style speaker sound'  (string)
>  pnp.id = 'PNP0800'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  info.linux.driver = 'rtc_cmos'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'AT Real-Time Clock'  (string)
>  info.subsystem = 'pnp'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pnp'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:02'  (string)
>  pnp.description = 'AT Real-Time Clock'  (string)
>  pnp.id = 'PNP0b00'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'AT DMA Controller'  (string)
>  info.subsystem = 'pnp'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pnp'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:01'  (string)
>  pnp.description = 'AT DMA Controller'  (string)
>  pnp.id = 'PNP0200'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'PCI Bus'  (string)
>  info.subsystem = 'pnp'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pnp'  (string)
>  linux.sysfs_path = '/sys/devices/pnp0/00:00'  (string)
>  pnp.description = 'PCI Bus'  (string)
>  pnp.id = 'PNP0a03'  (string)
>
>udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
>  info.linux.driver = 'vesafb'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'Platform Device (vesafb.0)'  (string)
>  info.subsystem = 'platform'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'platform'  (string)
>  linux.sysfs_path = '/sys/devices/platform/vesafb.0'  (string)
>  platform.id = 'vesafb.0'  (string)
>
>udi = '/org/freedesktop/Hal/devices/platform_serial8250'
>  info.linux.driver = 'serial8250'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'Platform Device (serial8250)'  (string)
>  info.subsystem = 'platform'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'platform'  (string)
>  linux.sysfs_path = '/sys/devices/platform/serial8250'  (string)
>  platform.id = 'serial8250'  (string)
>
>udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
>  info.linux.driver = 'pcspkr'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'Platform Device (pcspkr)'  (string)
>  info.subsystem = 'platform'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'platform'  (string)
>  linux.sysfs_path = '/sys/devices/platform/pcspkr'  (string)
>  platform.id = 'pcspkr'  (string)
>
>udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
>  info.capabilities = {'input'} (string list)
>  info.category = 'input'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
>  info.product = 'PC Speaker'  (string)
>  info.subsystem = 'input'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'  (string)
>  input.device = '/dev/input/event4'  (string)
>  input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
>  input.product = 'PC Speaker'  (string)
>  linux.device_file = '/dev/input/event4'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'input'  (string)
>  linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input4/event4'  (string)
>
>udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'
>  info.linux.driver = 'iTCO_wdt'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'Platform Device (iTCO_wdt)'  (string)
>  info.subsystem = 'platform'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'platform'  (string)
>  linux.sysfs_path = '/sys/devices/platform/iTCO_wdt'  (string)
>  platform.id = 'iTCO_wdt'  (string)
>
>udi = '/org/freedesktop/Hal/devices/platform_i8042'
>  info.linux.driver = 'i8042'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = 'Platform Device (i8042)'  (string)
>  info.subsystem = 'platform'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'platform'  (string)
>  linux.sysfs_path = '/sys/devices/platform/i8042'  (string)
>  platform.id = 'i8042'  (string)
>
>udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
>  info.linux.driver = 'psmouse'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
>  info.product = 'i8042 AUX port'  (string)
>  info.subsystem = 'serio'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'serio'  (string)
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'  (string)
>  serio.description = 'i8042 AUX port'  (string)
>  serio.id = 'serio1'  (string)
>
>udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
>  access_control.file = '/dev/input/event1'  (string)
>  access_control.type = 'mouse'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
>  info.category = 'input'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
>  info.product = 'ImExPS/2 Logitech Explorer Mouse'  (string)
>  info.subsystem = 'input'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'  (string)
>  input.device = '/dev/input/event1'  (string)
>  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
>  input.product = 'ImExPS/2 Logitech Explorer Mouse'  (string)
>  input.x11_driver = 'evdev'  (string)
>  linux.device_file = '/dev/input/event1'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'input'  (string)
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input1/event1'  (string)
>
>udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
>  info.linux.driver = 'atkbd'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
>  info.product = 'i8042 KBD port'  (string)
>  info.subsystem = 'serio'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'serio'  (string)
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'  (string)
>  serio.description = 'i8042 KBD port'  (string)
>  serio.id = 'serio0'  (string)
>
>udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
>  info.addons.singleton = {'hald-addon-input'} (string list)
>  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
>  info.category = 'input'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
>  info.product = 'AT Translated Set 2 keyboard'  (string)
>  info.subsystem = 'input'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'  (string)
>  input.device = '/dev/input/event0'  (string)
>  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
>  input.product = 'AT Translated Set 2 keyboard'  (string)
>  input.x11_driver = 'evdev'  (string)
>  input.xkb.layout = 'us'  (string)
>  input.xkb.model = 'evdev'  (string)
>  input.xkb.rules = 'base'  (string)
>  input.xkb.variant = ''  (string)
>  linux.device_file = '/dev/input/event0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'input'  (string)
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input0/event0'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d5'
>  info.linux.driver = 'Intel ICH'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = '82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
>  info.vendor = 'Intel Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5'  (string)
>  pci.device_class = 4  (0x4)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 1  (0x1)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5'  (string)
>  pci.product = '82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller'  (string)
>  pci.product_id = 9429  (0x24d5)  (int)
>  pci.subsys_product_id = 33319  (0x8227)  (int)
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
>  pci.subsys_vendor_id = 4163  (0x1043)  (int)
>  pci.vendor = 'Intel Corporation'  (string)
>  pci.vendor_id = 32902  (0x8086)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'
>  info.capabilities = {'sound'} (string list)
>  info.category = 'sound'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
>  info.product = 'Intel ICH5 with AD1888 Sound Card'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/sound/card0'  (string)
>  sound.card = 0  (0x0)  (int)
>  sound.card_id = 'Intel ICH5 with AD1888'  (string)
>  sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_oss_pcm_0_0'
>  access_control.file = '/dev/audio'  (string)
>  access_control.type = 'sound'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'oss', 'access_control'} (string list)
>  info.category = 'oss'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  info.product = 'Intel ICH5 OSS PCM Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_oss_pcm_0_0'  (string)
>  linux.device_file = '/dev/audio'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/sound/card0/audio'  (string)
>  oss.card = 0  (0x0)  (int)
>  oss.card_id = 'Intel ICH5 with AD1888'  (string)
>  oss.device = 0  (0x0)  (int)
>  oss.device_file = '/dev/audio'  (string)
>  oss.device_id = 'Intel ICH5'  (string)
>  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  oss.type = 'pcm'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_oss_pcm_0'
>  access_control.file = '/dev/dsp'  (string)
>  access_control.type = 'sound'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'oss', 'access_control'} (string list)
>  info.category = 'oss'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  info.product = 'Intel ICH5 OSS PCM Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_oss_pcm_0'  (string)
>  linux.device_file = '/dev/dsp'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/sound/card0/dsp'  (string)
>  oss.card = 0  (0x0)  (int)
>  oss.card_id = 'Intel ICH5 with AD1888'  (string)
>  oss.device = 0  (0x0)  (int)
>  oss.device_file = '/dev/dsp'  (string)
>  oss.device_id = 'Intel ICH5'  (string)
>  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  oss.type = 'pcm'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_oss_pcm_1'
>  access_control.file = '/dev/adsp'  (string)
>  access_control.type = 'sound'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'oss', 'access_control'} (string list)
>  info.category = 'oss'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  info.product = 'Intel ICH5 OSS PCM Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_oss_pcm_1'  (string)
>  linux.device_file = '/dev/adsp'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/sound/card0/adsp'  (string)
>  oss.card = 0  (0x0)  (int)
>  oss.card_id = 'Intel ICH5 with AD1888'  (string)
>  oss.device = 1  (0x1)  (int)
>  oss.device_file = '/dev/adsp'  (string)
>  oss.device_id = 'Intel ICH5'  (string)
>  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  oss.type = 'pcm'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_oss_mixer__1'
>  access_control.file = '/dev/mixer'  (string)
>  access_control.type = 'sound'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'oss', 'access_control'} (string list)
>  info.category = 'oss'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  info.product = 'Intel ICH5 OSS Control Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_oss_mixer__1'  (string)
>  linux.device_file = '/dev/mixer'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/sound/card0/mixer'  (string)
>  oss.card = 0  (0x0)  (int)
>  oss.card_id = 'Intel ICH5 with AD1888'  (string)
>  oss.device_file = '/dev/mixer'  (string)
>  oss.device_id = 'Intel ICH5'  (string)
>  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  oss.type = 'mixer'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_playback_4'
>  access_control.file = '/dev/snd/pcmC0D4p'  (string)
>  access_control.type = 'sound'  (string)
>  alsa.card = 0  (0x0)  (int)
>  alsa.card_id = 'Intel ICH5 with AD1888'  (string)
>  alsa.device = 4  (0x4)  (int)
>  alsa.device_file = '/dev/snd/pcmC0D4p'  (string)
>  alsa.device_id = 'Intel ICH5 - IEC958'  (string)
>  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  alsa.pcm_class = 'generic'  (string)
>  alsa.type = 'playback'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'alsa', 'access_control'} (string list)
>  info.category = 'alsa'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  info.product = 'Intel ICH5 - IEC958 ALSA Playback Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_playback_4'  (string)
>  linux.device_file = '/dev/snd/pcmC0D4p'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/sound/card0/pcmC0D4p'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_capture_3'
>  access_control.file = '/dev/snd/pcmC0D3c'  (string)
>  access_control.type = 'sound'  (string)
>  alsa.card = 0  (0x0)  (int)
>  alsa.card_id = 'Intel ICH5 with AD1888'  (string)
>  alsa.device = 3  (0x3)  (int)
>  alsa.device_file = '/dev/snd/pcmC0D3c'  (string)
>  alsa.device_id = 'Intel ICH5 - ADC2'  (string)
>  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  alsa.pcm_class = 'generic'  (string)
>  alsa.type = 'capture'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'alsa', 'access_control'} (string list)
>  info.category = 'alsa'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  info.product = 'Intel ICH5 - ADC2 ALSA Capture Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_capture_3'  (string)
>  linux.device_file = '/dev/snd/pcmC0D3c'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/sound/card0/pcmC0D3c'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_capture_2'
>  access_control.file = '/dev/snd/pcmC0D2c'  (string)
>  access_control.type = 'sound'  (string)
>  alsa.card = 0  (0x0)  (int)
>  alsa.card_id = 'Intel ICH5 with AD1888'  (string)
>  alsa.device = 2  (0x2)  (int)
>  alsa.device_file = '/dev/snd/pcmC0D2c'  (string)
>  alsa.device_id = 'Intel ICH5 - MIC2 ADC'  (string)
>  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  alsa.pcm_class = 'generic'  (string)
>  alsa.type = 'capture'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'alsa', 'access_control'} (string list)
>  info.category = 'alsa'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  info.product = 'Intel ICH5 - MIC2 ADC ALSA Capture Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_capture_2'  (string)
>  linux.device_file = '/dev/snd/pcmC0D2c'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/sound/card0/pcmC0D2c'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_capture_1'
>  access_control.file = '/dev/snd/pcmC0D1c'  (string)
>  access_control.type = 'sound'  (string)
>  alsa.card = 0  (0x0)  (int)
>  alsa.card_id = 'Intel ICH5 with AD1888'  (string)
>  alsa.device = 1  (0x1)  (int)
>  alsa.device_file = '/dev/snd/pcmC0D1c'  (string)
>  alsa.device_id = 'Intel ICH5 - MIC ADC'  (string)
>  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  alsa.pcm_class = 'generic'  (string)
>  alsa.type = 'capture'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'alsa', 'access_control'} (string list)
>  info.category = 'alsa'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  info.product = 'Intel ICH5 - MIC ADC ALSA Capture Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_capture_1'  (string)
>  linux.device_file = '/dev/snd/pcmC0D1c'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/sound/card0/pcmC0D1c'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_playback_0'
>  access_control.file = '/dev/snd/pcmC0D0p'  (string)
>  access_control.type = 'sound'  (string)
>  alsa.card = 0  (0x0)  (int)
>  alsa.card_id = 'Intel ICH5 with AD1888'  (string)
>  alsa.device = 0  (0x0)  (int)
>  alsa.device_file = '/dev/snd/pcmC0D0p'  (string)
>  alsa.device_id = 'Intel ICH5'  (string)
>  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  alsa.pcm_class = 'generic'  (string)
>  alsa.type = 'playback'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'alsa', 'access_control'} (string list)
>  info.category = 'alsa'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  info.product = 'Intel ICH5 ALSA Playback Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_playback_0'  (string)
>  linux.device_file = '/dev/snd/pcmC0D0p'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/sound/card0/pcmC0D0p'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_capture_0'
>  access_control.file = '/dev/snd/pcmC0D0c'  (string)
>  access_control.type = 'sound'  (string)
>  alsa.card = 0  (0x0)  (int)
>  alsa.card_id = 'Intel ICH5 with AD1888'  (string)
>  alsa.device = 0  (0x0)  (int)
>  alsa.device_file = '/dev/snd/pcmC0D0c'  (string)
>  alsa.device_id = 'Intel ICH5'  (string)
>  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  alsa.pcm_class = 'generic'  (string)
>  alsa.type = 'capture'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'alsa', 'access_control'} (string list)
>  info.category = 'alsa'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  info.product = 'Intel ICH5 ALSA Capture Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_capture_0'  (string)
>  linux.device_file = '/dev/snd/pcmC0D0c'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/sound/card0/pcmC0D0c'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_control__1'
>  access_control.file = '/dev/snd/controlC0'  (string)
>  access_control.type = 'sound'  (string)
>  alsa.card = 0  (0x0)  (int)
>  alsa.card_id = 'Intel ICH5 with AD1888'  (string)
>  alsa.device_file = '/dev/snd/controlC0'  (string)
>  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  alsa.type = 'control'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'alsa', 'access_control'} (string list)
>  info.category = 'alsa'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0'  (string)
>  info.product = 'Intel ICH5 with AD1888 ALSA Control Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_sound_card_0_alsa_control__1'  (string)
>  linux.device_file = '/dev/snd/controlC0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5/sound/card0/controlC0'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24db'
>  info.linux.driver = 'ata_piix'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = '82801EB/ER (ICH5/ICH5R) IDE Controller'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24db'  (string)
>  info.vendor = 'Intel Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'  (string)
>  pci.device_class = 1  (0x1)  (int)
>  pci.device_protocol = 138  (0x8a)  (int)
>  pci.device_subclass = 1  (0x1)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'  (string)
>  pci.product = '82801EB/ER (ICH5/ICH5R) IDE Controller'  (string)
>  pci.product_id = 9435  (0x24db)  (int)
>  pci.subsys_product = 'P4P800/P5P800 series motherboard'  (string)
>  pci.subsys_product_id = 32934  (0x80a6)  (int)
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
>  pci.subsys_vendor_id = 4163  (0x1043)  (int)
>  pci.vendor = 'Intel Corporation'  (string)
>  pci.vendor_id = 32902  (0x8086)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_0'
>  info.capabilities = {'scsi_host'} (string list)
>  info.category = 'scsi_host'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24db'  (string)
>  info.product = 'SCSI Host Adapter'  (string)
>  info.subsystem = 'scsi_host'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_host'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host2'  (string)
>  scsi_host.host = 2  (0x2)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_0_scsi_host'
>  info.capabilities = {'scsi_host'} (string list)
>  info.category = 'scsi_host'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_0'  (string)
>  info.product = 'SCSI Host Adapter'  (string)
>  info.subsystem = 'scsi_host'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_0_scsi_host'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_host'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host2/scsi_host/host2'  (string)
>  scsi_host.host = 2  (0x2)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_0_scsi_device_lun0'
>  info.linux.driver = 'sr'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_0'  (string)
>  info.product = 'SCSI Device'  (string)
>  info.subsystem = 'scsi'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_0_scsi_device_lun0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host2/target2:0:0/2:0:0:0'  (string)
>  scsi.bus = 0  (0x0)  (int)
>  scsi.host = 2  (0x2)  (int)
>  scsi.lun = 0  (0x0)  (int)
>  scsi.model = 'DVD_RW ND-3520A'  (string)
>  scsi.target = 0  (0x0)  (int)
>  scsi.type = 'cdrom'  (string)
>  scsi.vendor = '_NEC'  (string)
>
>udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_ND_3520A'
>  access_control.file = '/dev/sr2'  (string)
>  access_control.type = 'cdrom'  (string)
>  block.device = '/dev/sr2'  (string)
>  block.is_volume = false  (bool)
>  block.major = 11  (0xb)  (int)
>  block.minor = 2  (0x2)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_ND_3520A'  (string)
>  info.addons = {'hald-addon-storage'} (string list)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control', 'access_control'} (string list)
>  info.category = 'storage'  (string)
>  info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_0_scsi_device_lun0'  (string)
>  info.product = 'DVD_RW ND-3520A'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_ND_3520A'  (string)
>  info.vendor = '_NEC'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host2/target2:0:0/2:0:0:0/block/sr2'  (string)
>  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
>  org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
>  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
>  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
>  storage.automount_enabled_hint = true  (bool)
>  storage.bus = 'pci'  (string)
>  storage.cdrom.bd = false  (bool)
>  storage.cdrom.bdr = false  (bool)
>  storage.cdrom.bdre = false  (bool)
>  storage.cdrom.cdr = true  (bool)
>  storage.cdrom.cdrw = true  (bool)
>  storage.cdrom.dvd = true  (bool)
>  storage.cdrom.dvdplusr = true  (bool)
>  storage.cdrom.dvdplusrdl = true  (bool)
>  storage.cdrom.dvdplusrw = true  (bool)
>  storage.cdrom.dvdplusrwdl = false  (bool)
>  storage.cdrom.dvdr = true  (bool)
>  storage.cdrom.dvdram = false  (bool)
>  storage.cdrom.dvdrdl = false  (bool)
>  storage.cdrom.dvdrw = true  (bool)
>  storage.cdrom.hddvd = false  (bool)
>  storage.cdrom.hddvdr = false  (bool)
>  storage.cdrom.hddvdrw = false  (bool)
>  storage.cdrom.mo = false  (bool)
>  storage.cdrom.mrw = true  (bool)
>  storage.cdrom.mrw_w = true  (bool)
>  storage.cdrom.read_speed = 8467  (0x2113)  (int)
>  storage.cdrom.support_media_changed = true  (bool)
>  storage.cdrom.support_multisession = true  (bool)
>  storage.cdrom.write_speed = 8467  (0x2113)  (int)
>  storage.cdrom.write_speeds = {'8467', '7056', '5645', '4234', '2822', '1411'} (string list)
>  storage.drive_type = 'cdrom'  (string)
>  storage.hotpluggable = false  (bool)
>  storage.lun = 0  (0x0)  (int)
>  storage.media_check_enabled = true  (bool)
>  storage.model = 'DVD_RW ND-3520A'  (string)
>  storage.no_partitions_hint = true  (bool)
>  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
>  storage.partitioning_scheme = ''  (string)
>  storage.removable = true  (bool)
>  storage.removable.media_available = true  (bool)
>  storage.removable.media_size = 4253456384  (0xfd869800)  (uint64)
>  storage.removable.support_async_notification = false  (bool)
>  storage.requires_eject = true  (bool)
>  storage.size = 0  (0x0)  (uint64)
>  storage.vendor = '_NEC'  (string)
>
>udi = '/org/freedesktop/Hal/devices/volume_label_BDV0NNM1'
>  block.device = '/dev/sr2'  (string)
>  block.is_volume = true  (bool)
>  block.major = 11  (0xb)  (int)
>  block.minor = 2  (0x2)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_ND_3520A'  (string)
>  info.capabilities = {'volume.disc', 'volume', 'block'} (string list)
>  info.category = 'volume'  (string)
>  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_ND_3520A'  (string)
>  info.product = 'BDV0NNM1'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/volume_label_BDV0NNM1'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host2/target2:0:0/2:0:0:0/block/sr2/fakevolume'  (string)
>  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
>  volume.block_size = 2048  (0x800)  (int)
>  volume.disc.capacity = 4253456384  (0xfd869800)  (uint64)
>  volume.disc.has_audio = false  (bool)
>  volume.disc.has_data = true  (bool)
>  volume.disc.is_appendable = false  (bool)
>  volume.disc.is_blank = false  (bool)
>  volume.disc.is_blurayvideo = false  (bool)
>  volume.disc.is_rewritable = false  (bool)
>  volume.disc.is_svcd = false  (bool)
>  volume.disc.is_vcd = false  (bool)
>  volume.disc.is_videodvd = true  (bool)
>  volume.disc.type = 'dvd_rom'  (string)
>  volume.fstype = 'udf'  (string)
>  volume.fsusage = 'filesystem'  (string)
>  volume.fsversion = ''  (string)
>  volume.ignore = false  (bool)
>  volume.is_disc = true  (bool)
>  volume.is_mounted = true  (bool)
>  volume.is_mounted_read_only = true  (bool)
>  volume.is_partition = false  (bool)
>  volume.label = 'BDV0NNM1'  (string)
>  volume.linux.is_device_mapper = false  (bool)
>  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'umask='} (string list)
>  volume.mount_point = '/media/BDV0NNM1'  (string)
>  volume.num_blocks = 8307532  (0x7ec34c)  (uint64)
>  volume.size = 4253456384  (0xfd869800)  (uint64)
>  volume.unmount.valid_options = {'lazy'} (string list)
>  volume.uuid = ''  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_0_scsi_device_lun0_scsi_generic'
>  access_control.file = '/dev/sg5'  (string)
>  access_control.type = 'cdrom'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'scsi_generic', 'access_control'} (string list)
>  info.category = 'scsi_generic'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_0_scsi_device_lun0'  (string)
>  info.product = 'SCSI Generic Interface'  (string)
>  info.subsystem = 'scsi_generic'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_0_scsi_device_lun0_scsi_generic'  (string)
>  linux.device_file = '/dev/sg5'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_generic'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host2/target2:0:0/2:0:0:0/scsi_generic/sg5'  (string)
>  scsi_generic.device = '/dev/sg5'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host'
>  info.capabilities = {'scsi_host'} (string list)
>  info.category = 'scsi_host'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24db'  (string)
>  info.product = 'SCSI Host Adapter'  (string)
>  info.subsystem = 'scsi_host'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_host'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1'  (string)
>  scsi_host.host = 1  (0x1)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_scsi_host'
>  info.capabilities = {'scsi_host'} (string list)
>  info.category = 'scsi_host'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host'  (string)
>  info.product = 'SCSI Host Adapter'  (string)
>  info.subsystem = 'scsi_host'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_scsi_host'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_host'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/scsi_host/host1'  (string)
>  scsi_host.host = 1  (0x1)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_scsi_device_lun0'
>  info.linux.driver = 'sr'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host'  (string)
>  info.product = 'SCSI Device'  (string)
>  info.subsystem = 'scsi'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_scsi_device_lun0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0'  (string)
>  scsi.bus = 0  (0x0)  (int)
>  scsi.host = 1  (0x1)  (int)
>  scsi.lun = 0  (0x0)  (int)
>  scsi.model = 'DVD RW DW-Q120A'  (string)
>  scsi.target = 0  (0x0)  (int)
>  scsi.type = 'cdrom'  (string)
>  scsi.vendor = 'SONY'  (string)
>
>udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_DW_Q120A'
>  access_control.file = '/dev/sr1'  (string)
>  access_control.type = 'cdrom'  (string)
>  block.device = '/dev/sr1'  (string)
>  block.is_volume = false  (bool)
>  block.major = 11  (0xb)  (int)
>  block.minor = 1  (0x1)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_DW_Q120A'  (string)
>  info.addons = {'hald-addon-storage'} (string list)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control', 'access_control'} (string list)
>  info.category = 'storage'  (string)
>  info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_scsi_device_lun0'  (string)
>  info.product = 'DVD RW DW-Q120A'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_DW_Q120A'  (string)
>  info.vendor = 'SONY'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0/block/sr1'  (string)
>  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
>  org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
>  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
>  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
>  storage.automount_enabled_hint = true  (bool)
>  storage.bus = 'pci'  (string)
>  storage.cdrom.bd = false  (bool)
>  storage.cdrom.bdr = false  (bool)
>  storage.cdrom.bdre = false  (bool)
>  storage.cdrom.cdr = true  (bool)
>  storage.cdrom.cdrw = true  (bool)
>  storage.cdrom.dvd = true  (bool)
>  storage.cdrom.dvdplusr = true  (bool)
>  storage.cdrom.dvdplusrdl = true  (bool)
>  storage.cdrom.dvdplusrw = true  (bool)
>  storage.cdrom.dvdplusrwdl = false  (bool)
>  storage.cdrom.dvdr = true  (bool)
>  storage.cdrom.dvdram = false  (bool)
>  storage.cdrom.dvdrdl = true  (bool)
>  storage.cdrom.dvdrw = true  (bool)
>  storage.cdrom.hddvd = false  (bool)
>  storage.cdrom.hddvdr = false  (bool)
>  storage.cdrom.hddvdrw = false  (bool)
>  storage.cdrom.mo = false  (bool)
>  storage.cdrom.mrw = true  (bool)
>  storage.cdrom.mrw_w = true  (bool)
>  storage.cdrom.read_speed = 11080  (0x2b48)  (int)
>  storage.cdrom.support_media_changed = true  (bool)
>  storage.cdrom.support_multisession = true  (bool)
>  storage.cdrom.write_speed = 22160  (0x5690)  (int)
>  storage.cdrom.write_speeds = {'8467', '7056', '5645', '4234', '2822', '2112', '1764', '1411', '706'} (string list)
>  storage.drive_type = 'cdrom'  (string)
>  storage.hotpluggable = false  (bool)
>  storage.lun = 0  (0x0)  (int)
>  storage.media_check_enabled = true  (bool)
>  storage.model = 'DVD RW DW-Q120A'  (string)
>  storage.no_partitions_hint = true  (bool)
>  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
>  storage.partitioning_scheme = ''  (string)
>  storage.removable = true  (bool)
>  storage.removable.media_available = true  (bool)
>  storage.removable.media_size = 7301287936  (0x1b330d000)  (uint64)
>  storage.removable.support_async_notification = false  (bool)
>  storage.requires_eject = true  (bool)
>  storage.size = 0  (0x0)  (uint64)
>  storage.vendor = 'SONY'  (string)
>
>udi = '/org/freedesktop/Hal/devices/volume_label_Baby_MacDonald'
>  block.device = '/dev/sr1'  (string)
>  block.is_volume = true  (bool)
>  block.major = 11  (0xb)  (int)
>  block.minor = 1  (0x1)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_DW_Q120A'  (string)
>  info.capabilities = {'volume.disc', 'volume', 'block'} (string list)
>  info.category = 'volume'  (string)
>  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/storage_model_DVD_RW_DW_Q120A'  (string)
>  info.product = 'Baby_MacDonald'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/volume_label_Baby_MacDonald'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0/block/sr1/fakevolume'  (string)
>  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
>  volume.block_size = 2048  (0x800)  (int)
>  volume.disc.capacity = 7301287936  (0x1b330d000)  (uint64)
>  volume.disc.has_audio = false  (bool)
>  volume.disc.has_data = true  (bool)
>  volume.disc.is_appendable = false  (bool)
>  volume.disc.is_blank = false  (bool)
>  volume.disc.is_blurayvideo = false  (bool)
>  volume.disc.is_rewritable = false  (bool)
>  volume.disc.is_svcd = false  (bool)
>  volume.disc.is_vcd = false  (bool)
>  volume.disc.is_videodvd = true  (bool)
>  volume.disc.type = 'dvd_rom'  (string)
>  volume.fstype = 'udf'  (string)
>  volume.fsusage = 'filesystem'  (string)
>  volume.fsversion = ''  (string)
>  volume.ignore = false  (bool)
>  volume.is_disc = true  (bool)
>  volume.is_mounted = false  (bool)
>  volume.is_mounted_read_only = false  (bool)
>  volume.is_partition = false  (bool)
>  volume.label = 'Baby_MacDonald'  (string)
>  volume.linux.is_device_mapper = false  (bool)
>  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'umask='} (string list)
>  volume.mount_point = ''  (string)
>  volume.num_blocks = 14260328  (0xd99868)  (uint64)
>  volume.size = 7301287936  (0x1b330d000)  (uint64)
>  volume.unmount.valid_options = {'lazy'} (string list)
>  volume.uuid = ''  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_scsi_device_lun0_scsi_generic'
>  access_control.file = '/dev/sg4'  (string)
>  access_control.type = 'cdrom'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'scsi_generic', 'access_control'} (string list)
>  info.category = 'scsi_generic'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_scsi_device_lun0'  (string)
>  info.product = 'SCSI Generic Interface'  (string)
>  info.subsystem = 'scsi_generic'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24db_scsi_host_scsi_device_lun0_scsi_generic'  (string)
>  linux.device_file = '/dev/sg4'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_generic'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0/scsi_generic/sg4'  (string)
>  scsi_generic.device = '/dev/sg4'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d0'  (string)
>  info.vendor = 'Intel Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
>  pci.device_class = 6  (0x6)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 1  (0x1)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
>  pci.product = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'  (string)
>  pci.product_id = 9424  (0x24d0)  (int)
>  pci.subsys_product_id = 0  (0x0)  (int)
>  pci.subsys_vendor_id = 0  (0x0)  (int)
>  pci.vendor = 'Intel Corporation'  (string)
>  pci.vendor_id = 32902  (0x8086)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_244e'
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = '82801 PCI Bridge'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_244e'  (string)
>  info.vendor = 'Intel Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
>  pci.device_class = 6  (0x6)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 4  (0x4)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
>  pci.product = '82801 PCI Bridge'  (string)
>  pci.product_id = 9294  (0x244e)  (int)
>  pci.subsys_product_id = 0  (0x0)  (int)
>  pci.subsys_vendor_id = 0  (0x0)  (int)
>  pci.vendor = 'Intel Corporation'  (string)
>  pci.vendor_id = 32902  (0x8086)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_11ab_4320'
>  info.linux.driver = 'skge'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e'  (string)
>  info.product = '88E8001 Gigabit Ethernet Controller'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_11ab_4320'  (string)
>  info.vendor = 'Marvell Technology Group Ltd.'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0d.0'  (string)
>  pci.device_class = 2  (0x2)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 0  (0x0)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0d.0'  (string)
>  pci.product = '88E8001 Gigabit Ethernet Controller'  (string)
>  pci.product_id = 17184  (0x4320)  (int)
>  pci.subsys_product = 'Marvell 88E8001 Gigabit Ethernet Controller (Asus)'  (string)
>  pci.subsys_product_id = 33050  (0x811a)  (int)
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
>  pci.subsys_vendor_id = 4163  (0x1043)  (int)
>  pci.vendor = 'Marvell Technology Group Ltd.'  (string)
>  pci.vendor_id = 4523  (0x11ab)  (int)
>
>udi = '/org/freedesktop/Hal/devices/net_00_1a_92_21_2c_a3'
>  info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
>  info.category = 'net.80203'  (string)
>  info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/pci_11ab_4320'  (string)
>  info.product = 'Networking Interface'  (string)
>  info.subsystem = 'net'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/net_00_1a_92_21_2c_a3'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'net'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0d.0/net/eth0'  (string)
>  net.80203.mac_address = 114120797347  (0x1a92212ca3)  (uint64)
>  net.address = '00:1a:92:21:2c:a3'  (string)
>  net.arp_proto_hw_id = 1  (0x1)  (int)
>  net.interface = 'eth0'  (string)
>  net.linux.ifindex = 2  (0x2)  (int)
>  net.originating_device = '/org/freedesktop/Hal/devices/pci_11ab_4320'  (string)
>  org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
>  org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
>  org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
>  org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)
>
>udi = '/org/freedesktop/Hal/devices/pci_10b7_9200'
>  info.linux.driver = '3c59x'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e'  (string)
>  info.product = '3c905C-TX/TX-M [Tornado]'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b7_9200'  (string)
>  info.vendor = '3Com Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0b.0'  (string)
>  pci.device_class = 2  (0x2)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 0  (0x0)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0b.0'  (string)
>  pci.product = '3c905C-TX/TX-M [Tornado]'  (string)
>  pci.product_id = 37376  (0x9200)  (int)
>  pci.subsys_product = '3C905CX-TX/TX-M Fast Etherlink for PC Management NIC'  (string)
>  pci.subsys_product_id = 4096  (0x1000)  (int)
>  pci.subsys_vendor = '3Com Corporation'  (string)
>  pci.subsys_vendor_id = 4279  (0x10b7)  (int)
>  pci.vendor = '3Com Corporation'  (string)
>  pci.vendor_id = 4279  (0x10b7)  (int)
>
>udi = '/org/freedesktop/Hal/devices/net_00_50_da_6f_2b_1c'
>  info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
>  info.category = 'net.80203'  (string)
>  info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b7_9200'  (string)
>  info.product = 'Networking Interface'  (string)
>  info.subsystem = 'net'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/net_00_50_da_6f_2b_1c'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'net'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0b.0/net/eth1'  (string)
>  net.80203.mac_address = 347262102300  (0x50da6f2b1c)  (uint64)
>  net.address = '00:50:da:6f:2b:1c'  (string)
>  net.arp_proto_hw_id = 1  (0x1)  (int)
>  net.interface = 'eth1'  (string)
>  net.linux.ifindex = 3  (0x3)  (int)
>  net.originating_device = '/org/freedesktop/Hal/devices/pci_10b7_9200'  (string)
>  org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
>  org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
>  org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
>  org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)
>
>udi = '/org/freedesktop/Hal/devices/pci_9005_80'
>  info.linux.driver = 'aic7xxx'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e'  (string)
>  info.product = 'AIC-7892A U160/m'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_9005_80'  (string)
>  info.vendor = 'Adaptec'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0'  (string)
>  pci.device_class = 1  (0x1)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 0  (0x0)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0'  (string)
>  pci.product = 'AIC-7892A U160/m'  (string)
>  pci.product_id = 128  (0x80)  (int)
>  pci.subsys_product = '29160 Ultra160 SCSI Controller'  (string)
>  pci.subsys_product_id = 58016  (0xe2a0)  (int)
>  pci.subsys_vendor = 'Adaptec'  (string)
>  pci.subsys_vendor_id = 36869  (0x9005)  (int)
>  pci.vendor = 'Adaptec'  (string)
>  pci.vendor_id = 36869  (0x9005)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host'
>  info.capabilities = {'scsi_host'} (string list)
>  info.category = 'scsi_host'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80'  (string)
>  info.product = 'SCSI Host Adapter'  (string)
>  info.subsystem = 'scsi_host'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_host'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0'  (string)
>  scsi_host.host = 0  (0x0)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_host'
>  info.capabilities = {'scsi_host'} (string list)
>  info.category = 'scsi_host'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host'  (string)
>  info.product = 'SCSI Host Adapter'  (string)
>  info.subsystem = 'scsi_host'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_host'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_host'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/scsi_host/host0'  (string)
>  scsi_host.host = 0  (0x0)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_2'
>  info.linux.driver = 'sr'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host'  (string)
>  info.product = 'SCSI Device'  (string)
>  info.subsystem = 'scsi'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_2'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:6/0:0:6:0'  (string)
>  scsi.bus = 0  (0x0)  (int)
>  scsi.host = 0  (0x0)  (int)
>  scsi.lun = 0  (0x0)  (int)
>  scsi.model = 'CD-R   PX-W4012S'  (string)
>  scsi.target = 6  (0x6)  (int)
>  scsi.type = 'cdrom'  (string)
>  scsi.vendor = 'PLEXTOR'  (string)
>
>udi = '/org/freedesktop/Hal/devices/storage_model_CD_R___PX_W4012S'
>  access_control.file = '/dev/sr0'  (string)
>  access_control.type = 'cdrom'  (string)
>  block.device = '/dev/sr0'  (string)
>  block.is_volume = false  (bool)
>  block.major = 11  (0xb)  (int)
>  block.minor = 0  (0x0)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CD_R___PX_W4012S'  (string)
>  info.addons = {'hald-addon-storage'} (string list)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control', 'access_control'} (string list)
>  info.category = 'storage'  (string)
>  info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_2'  (string)
>  info.product = 'CD-R   PX-W4012S'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/storage_model_CD_R___PX_W4012S'  (string)
>  info.vendor = 'PLEXTOR'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:6/0:0:6:0/block/sr0'  (string)
>  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
>  org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
>  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
>  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
>  storage.automount_enabled_hint = true  (bool)
>  storage.bus = 'pci'  (string)
>  storage.cdrom.bd = false  (bool)
>  storage.cdrom.bdr = false  (bool)
>  storage.cdrom.bdre = false  (bool)
>  storage.cdrom.cdr = true  (bool)
>  storage.cdrom.cdrw = true  (bool)
>  storage.cdrom.dvd = false  (bool)
>  storage.cdrom.dvdplusr = false  (bool)
>  storage.cdrom.dvdplusrdl = false  (bool)
>  storage.cdrom.dvdplusrw = false  (bool)
>  storage.cdrom.dvdplusrwdl = false  (bool)
>  storage.cdrom.dvdr = false  (bool)
>  storage.cdrom.dvdram = false  (bool)
>  storage.cdrom.dvdrdl = false  (bool)
>  storage.cdrom.dvdrw = false  (bool)
>  storage.cdrom.hddvd = false  (bool)
>  storage.cdrom.hddvdr = false  (bool)
>  storage.cdrom.hddvdrw = false  (bool)
>  storage.cdrom.mo = false  (bool)
>  storage.cdrom.mrw = true  (bool)
>  storage.cdrom.mrw_w = true  (bool)
>  storage.cdrom.read_speed = 7056  (0x1b90)  (int)
>  storage.cdrom.support_media_changed = true  (bool)
>  storage.cdrom.support_multisession = true  (bool)
>  storage.cdrom.write_speed = 7056  (0x1b90)  (int)
>  storage.cdrom.write_speeds = {'7056', '5645', '4234', '3528', '2822', '1411', '706', '176'} (string list)
>  storage.drive_type = 'cdrom'  (string)
>  storage.hotpluggable = false  (bool)
>  storage.lun = 0  (0x0)  (int)
>  storage.media_check_enabled = true  (bool)
>  storage.model = 'CD-R   PX-W4012S'  (string)
>  storage.no_partitions_hint = true  (bool)
>  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
>  storage.partitioning_scheme = ''  (string)
>  storage.removable = true  (bool)
>  storage.removable.media_available = false  (bool)
>  storage.removable.support_async_notification = false  (bool)
>  storage.requires_eject = true  (bool)
>  storage.size = 0  (0x0)  (uint64)
>  storage.vendor = 'PLEXTOR'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_2_scsi_generic'
>  access_control.file = '/dev/sg3'  (string)
>  access_control.type = 'cdrom'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'scsi_generic', 'access_control'} (string list)
>  info.category = 'scsi_generic'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_2'  (string)
>  info.product = 'SCSI Generic Interface'  (string)
>  info.subsystem = 'scsi_generic'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_2_scsi_generic'  (string)
>  linux.device_file = '/dev/sg3'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_generic'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:6/0:0:6:0/scsi_generic/sg3'  (string)
>  scsi_generic.device = '/dev/sg3'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_1'
>  info.linux.driver = 'sd'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host'  (string)
>  info.product = 'SCSI Device'  (string)
>  info.subsystem = 'scsi'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_1'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:2/0:0:2:0'  (string)
>  scsi.bus = 0  (0x0)  (int)
>  scsi.host = 0  (0x0)  (int)
>  scsi.lun = 0  (0x0)  (int)
>  scsi.model = 'ST318404LW'  (string)
>  scsi.target = 2  (0x2)  (int)
>  scsi.type = 'disk'  (string)
>  scsi.vendor = 'SEAGATE'  (string)
>
>udi = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318404LW_3BT03LZ500007036HBXT'
>  block.device = '/dev/sdc'  (string)
>  block.is_volume = false  (bool)
>  block.major = 8  (0x8)  (int)
>  block.minor = 32  (0x20)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318404LW_3BT03LZ500007036HBXT'  (string)
>  info.capabilities = {'storage', 'block'} (string list)
>  info.category = 'storage'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_1'  (string)
>  info.product = 'ST318404LW'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318404LW_3BT03LZ500007036HBXT'  (string)
>  info.vendor = 'SEAGATE'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:2/0:0:2:0/block/sdc'  (string)
>  storage.automount_enabled_hint = true  (bool)
>  storage.bus = 'pci'  (string)
>  storage.drive_type = 'disk'  (string)
>  storage.firmware_version = '0002'  (string)
>  storage.hotpluggable = false  (bool)
>  storage.lun = 0  (0x0)  (int)
>  storage.media_check_enabled = false  (bool)
>  storage.model = 'ST318404LW'  (string)
>  storage.no_partitions_hint = false  (bool)
>  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
>  storage.partitioning_scheme = 'mbr'  (string)
>  storage.removable = false  (bool)
>  storage.removable.media_available = true  (bool)
>  storage.removable.media_size = 18351959040  (0x445dcac00)  (uint64)
>  storage.requires_eject = false  (bool)
>  storage.serial = 'SSEAGATE_ST318404LW_3BT03LZ500007036HBXT'  (string)
>  storage.size = 18351959040  (0x445dcac00)  (uint64)
>  storage.vendor = 'SEAGATE'  (string)
>
>udi = '/org/freedesktop/Hal/devices/volume_uuid_5A484B64484B3E4F'
>  block.device = '/dev/sdc1'  (string)
>  block.is_volume = true  (bool)
>  block.major = 8  (0x8)  (int)
>  block.minor = 33  (0x21)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318404LW_3BT03LZ500007036HBXT'  (string)
>  info.capabilities = {'volume', 'block'} (string list)
>  info.category = 'volume'  (string)
>  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318404LW_3BT03LZ500007036HBXT'  (string)
>  info.product = 'Local Disk'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_5A484B64484B3E4F'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:2/0:0:2:0/block/sdc/sdc1'  (string)
>  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
>  volume.block_size = 512  (0x200)  (int)
>  volume.fstype = 'ntfs-3g'  (string)
>  volume.fsusage = 'filesystem'  (string)
>  volume.fsversion = '3.0'  (string)
>  volume.ignore = false  (bool)
>  volume.is_disc = false  (bool)
>  volume.is_mounted = true  (bool)
>  volume.is_mounted_read_only = false  (bool)
>  volume.is_partition = true  (bool)
>  volume.label = 'Local Disk'  (string)
>  volume.linux.is_device_mapper = false  (bool)
>  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8', 'locale='} (string list)
>  volume.mount_point = '/windows/C'  (string)
>  volume.num_blocks = 35824887  (0x222a4f7)  (uint64)
>  volume.partition.media_size = 18351959040  (0x445dcac00)  (uint64)
>  volume.partition.number = 1  (0x1)  (int)
>  volume.partition.start = 32256  (0x7e00)  (uint64)
>  volume.policy.mount_filesystem = 'ntfs-3g'  (string)
>  volume.size = 18342342144  (0x44549ee00)  (uint64)
>  volume.unmount.valid_options = {'lazy'} (string list)
>  volume.uuid = '5A484B64484B3E4F'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_1_scsi_generic'
>  info.capabilities = {'scsi_generic'} (string list)
>  info.category = 'scsi_generic'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_1'  (string)
>  info.product = 'SCSI Generic Interface'  (string)
>  info.subsystem = 'scsi_generic'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_1_scsi_generic'  (string)
>  linux.device_file = '/dev/sg2'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_generic'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:2/0:0:2:0/scsi_generic/sg2'  (string)
>  scsi_generic.device = '/dev/sg2'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_0'
>  info.linux.driver = 'sd'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host'  (string)
>  info.product = 'SCSI Device'  (string)
>  info.subsystem = 'scsi'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:1/0:0:1:0'  (string)
>  scsi.bus = 0  (0x0)  (int)
>  scsi.host = 0  (0x0)  (int)
>  scsi.lun = 0  (0x0)  (int)
>  scsi.model = 'ST336607LW'  (string)
>  scsi.target = 1  (0x1)  (int)
>  scsi.type = 'disk'  (string)
>  scsi.vendor = 'SEAGATE'  (string)
>
>udi = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST336607LW_3JA0JQTH000073230FGJ'
>  block.device = '/dev/sdb'  (string)
>  block.is_volume = false  (bool)
>  block.major = 8  (0x8)  (int)
>  block.minor = 16  (0x10)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST336607LW_3JA0JQTH000073230FGJ'  (string)
>  info.capabilities = {'storage', 'block'} (string list)
>  info.category = 'storage'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_0'  (string)
>  info.product = 'ST336607LW'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST336607LW_3JA0JQTH000073230FGJ'  (string)
>  info.vendor = 'SEAGATE'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:1/0:0:1:0/block/sdb'  (string)
>  storage.automount_enabled_hint = true  (bool)
>  storage.bus = 'pci'  (string)
>  storage.drive_type = 'disk'  (string)
>  storage.firmware_version = '0004'  (string)
>  storage.hotpluggable = false  (bool)
>  storage.lun = 0  (0x0)  (int)
>  storage.media_check_enabled = false  (bool)
>  storage.model = 'ST336607LW'  (string)
>  storage.no_partitions_hint = false  (bool)
>  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
>  storage.partitioning_scheme = 'mbr'  (string)
>  storage.removable = false  (bool)
>  storage.removable.media_available = true  (bool)
>  storage.removable.media_size = 36703934464  (0x88bb99800)  (uint64)
>  storage.requires_eject = false  (bool)
>  storage.serial = 'SSEAGATE_ST336607LW_3JA0JQTH000073230FGJ'  (string)
>  storage.size = 36703934464  (0x88bb99800)  (uint64)
>  storage.vendor = 'SEAGATE'  (string)
>
>udi = '/org/freedesktop/Hal/devices/volume_uuid_4655fdc6_cb41_42cc_a32e_7021f9f6c585'
>  block.device = '/dev/sdb1'  (string)
>  block.is_volume = true  (bool)
>  block.major = 8  (0x8)  (int)
>  block.minor = 17  (0x11)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST336607LW_3JA0JQTH000073230FGJ'  (string)
>  info.capabilities = {'volume', 'block'} (string list)
>  info.category = 'volume'  (string)
>  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST336607LW_3JA0JQTH000073230FGJ'  (string)
>  info.product = 'Volume (reiserfs)'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_4655fdc6_cb41_42cc_a32e_7021f9f6c585'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:1/0:0:1:0/block/sdb/sdb1'  (string)
>  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
>  volume.block_size = 512  (0x200)  (int)
>  volume.fstype = 'reiserfs'  (string)
>  volume.fsusage = 'filesystem'  (string)
>  volume.fsversion = '3.6'  (string)
>  volume.ignore = false  (bool)
>  volume.is_disc = false  (bool)
>  volume.is_mounted = true  (bool)
>  volume.is_mounted_read_only = false  (bool)
>  volume.is_partition = true  (bool)
>  volume.label = ''  (string)
>  volume.linux.is_device_mapper = false  (bool)
>  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr'} (string list)
>  volume.mount_point = '/'  (string)
>  volume.num_blocks = 71681967  (0x445c7af)  (uint64)
>  volume.partition.media_size = 36703934464  (0x88bb99800)  (uint64)
>  volume.partition.number = 1  (0x1)  (int)
>  volume.partition.start = 32256  (0x7e00)  (uint64)
>  volume.size = 36701167104  (0x88b8f5e00)  (uint64)
>  volume.unmount.valid_options = {'lazy'} (string list)
>  volume.uuid = '4655fdc6-cb41-42cc-a32e-7021f9f6c585'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_0_scsi_generic'
>  info.capabilities = {'scsi_generic'} (string list)
>  info.category = 'scsi_generic'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_0'  (string)
>  info.product = 'SCSI Generic Interface'  (string)
>  info.subsystem = 'scsi_generic'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_0_scsi_generic'  (string)
>  linux.device_file = '/dev/sg1'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_generic'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:1/0:0:1:0/scsi_generic/sg1'  (string)
>  scsi_generic.device = '/dev/sg1'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0'
>  info.linux.driver = 'sd'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host'  (string)
>  info.product = 'SCSI Device'  (string)
>  info.subsystem = 'scsi'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:0/0:0:0:0'  (string)
>  scsi.bus = 0  (0x0)  (int)
>  scsi.host = 0  (0x0)  (int)
>  scsi.lun = 0  (0x0)  (int)
>  scsi.model = 'ST318452LW'  (string)
>  scsi.target = 0  (0x0)  (int)
>  scsi.type = 'disk'  (string)
>  scsi.vendor = 'SEAGATE'  (string)
>
>udi = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318452LW_3EV0FGJ6000072312B23'
>  block.device = '/dev/sda'  (string)
>  block.is_volume = false  (bool)
>  block.major = 8  (0x8)  (int)
>  block.minor = 0  (0x0)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318452LW_3EV0FGJ6000072312B23'  (string)
>  info.capabilities = {'storage', 'block'} (string list)
>  info.category = 'storage'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0'  (string)
>  info.product = 'ST318452LW'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318452LW_3EV0FGJ6000072312B23'  (string)
>  info.vendor = 'SEAGATE'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:0/0:0:0:0/block/sda'  (string)
>  storage.automount_enabled_hint = true  (bool)
>  storage.bus = 'pci'  (string)
>  storage.drive_type = 'disk'  (string)
>  storage.firmware_version = '0004'  (string)
>  storage.hotpluggable = false  (bool)
>  storage.lun = 0  (0x0)  (int)
>  storage.media_check_enabled = false  (bool)
>  storage.model = 'ST318452LW'  (string)
>  storage.no_partitions_hint = false  (bool)
>  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
>  storage.partitioning_scheme = 'mbr'  (string)
>  storage.removable = false  (bool)
>  storage.removable.media_available = true  (bool)
>  storage.removable.media_size = 18351959040  (0x445dcac00)  (uint64)
>  storage.requires_eject = false  (bool)
>  storage.serial = 'SSEAGATE_ST318452LW_3EV0FGJ6000072312B23'  (string)
>  storage.size = 18351959040  (0x445dcac00)  (uint64)
>  storage.vendor = 'SEAGATE'  (string)
>
>udi = '/org/freedesktop/Hal/devices/volume_uuid_40e663ff_8433_4ac8_8630_00c7fff20e25'
>  block.device = '/dev/sda3'  (string)
>  block.is_volume = true  (bool)
>  block.major = 8  (0x8)  (int)
>  block.minor = 3  (0x3)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318452LW_3EV0FGJ6000072312B23'  (string)
>  info.capabilities = {'volume', 'block'} (string list)
>  info.category = 'volume'  (string)
>  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318452LW_3EV0FGJ6000072312B23'  (string)
>  info.product = 'Volume (reiserfs)'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_40e663ff_8433_4ac8_8630_00c7fff20e25'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:0/0:0:0:0/block/sda/sda3'  (string)
>  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
>  volume.block_size = 512  (0x200)  (int)
>  volume.fstype = 'reiserfs'  (string)
>  volume.fsusage = 'filesystem'  (string)
>  volume.fsversion = '3.6'  (string)
>  volume.ignore = false  (bool)
>  volume.is_disc = false  (bool)
>  volume.is_mounted = true  (bool)
>  volume.is_mounted_read_only = false  (bool)
>  volume.is_partition = true  (bool)
>  volume.label = ''  (string)
>  volume.linux.is_device_mapper = false  (bool)
>  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr'} (string list)
>  volume.mount_point = '/home'  (string)
>  volume.num_blocks = 33318810  (0x1fc679a)  (uint64)
>  volume.partition.media_size = 18351959040  (0x445dcac00)  (uint64)
>  volume.partition.number = 3  (0x3)  (int)
>  volume.partition.start = 1291368960  (0x4cf8ba00)  (uint64)
>  volume.size = 17059230720  (0x3f8cf3400)  (uint64)
>  volume.unmount.valid_options = {'lazy'} (string list)
>  volume.uuid = '40e663ff-8433-4ac8-8630-00c7fff20e25'  (string)
>
>udi = '/org/freedesktop/Hal/devices/volume_uuid_ddf0d42b_96e5_4e97_bd1a_10e3dd5f599b'
>  block.device = '/dev/sda2'  (string)
>  block.is_volume = true  (bool)
>  block.major = 8  (0x8)  (int)
>  block.minor = 2  (0x2)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318452LW_3EV0FGJ6000072312B23'  (string)
>  info.capabilities = {'volume', 'block'} (string list)
>  info.category = 'volume'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318452LW_3EV0FGJ6000072312B23'  (string)
>  info.product = 'Volume (swap)'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_ddf0d42b_96e5_4e97_bd1a_10e3dd5f599b'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:0/0:0:0:0/block/sda/sda2'  (string)
>  volume.block_size = 512  (0x200)  (int)
>  volume.fstype = 'swap'  (string)
>  volume.fsusage = 'other'  (string)
>  volume.fsversion = '2'  (string)
>  volume.is_disc = false  (bool)
>  volume.is_mounted = false  (bool)
>  volume.is_mounted_read_only = false  (bool)
>  volume.is_partition = true  (bool)
>  volume.label = ''  (string)
>  volume.linux.is_device_mapper = false  (bool)
>  volume.mount_point = ''  (string)
>  volume.num_blocks = 2104514  (0x201cc2)  (uint64)
>  volume.partition.media_size = 18351959040  (0x445dcac00)  (uint64)
>  volume.partition.number = 2  (0x2)  (int)
>  volume.partition.start = 213857280  (0xcbf3400)  (uint64)
>  volume.size = 1077511168  (0x40398400)  (uint64)
>  volume.uuid = 'ddf0d42b-96e5-4e97-bd1a-10e3dd5f599b'  (string)
>
>udi = '/org/freedesktop/Hal/devices/volume_uuid_37c7e05c_cfb0_4d73_8822_4ccd28cd66b0'
>  block.device = '/dev/sda1'  (string)
>  block.is_volume = true  (bool)
>  block.major = 8  (0x8)  (int)
>  block.minor = 1  (0x1)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318452LW_3EV0FGJ6000072312B23'  (string)
>  info.capabilities = {'volume', 'block'} (string list)
>  info.category = 'volume'  (string)
>  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SSEAGATE_ST318452LW_3EV0FGJ6000072312B23'  (string)
>  info.product = 'Volume (reiserfs)'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_37c7e05c_cfb0_4d73_8822_4ccd28cd66b0'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:0/0:0:0:0/block/sda/sda1'  (string)
>  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
>  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
>  volume.block_size = 512  (0x200)  (int)
>  volume.fstype = 'reiserfs'  (string)
>  volume.fsusage = 'filesystem'  (string)
>  volume.fsversion = '3.6'  (string)
>  volume.ignore = false  (bool)
>  volume.is_disc = false  (bool)
>  volume.is_mounted = true  (bool)
>  volume.is_mounted_read_only = false  (bool)
>  volume.is_partition = true  (bool)
>  volume.label = ''  (string)
>  volume.linux.is_device_mapper = false  (bool)
>  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr'} (string list)
>  volume.mount_point = '/boot'  (string)
>  volume.num_blocks = 417627  (0x65f5b)  (uint64)
>  volume.partition.media_size = 18351959040  (0x445dcac00)  (uint64)
>  volume.partition.number = 1  (0x1)  (int)
>  volume.partition.start = 32256  (0x7e00)  (uint64)
>  volume.size = 213825024  (0xcbeb600)  (uint64)
>  volume.unmount.valid_options = {'lazy'} (string list)
>  volume.uuid = '37c7e05c-cfb0-4d73-8822-4ccd28cd66b0'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_scsi_generic'
>  info.capabilities = {'scsi_generic'} (string list)
>  info.category = 'scsi_generic'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0'  (string)
>  info.product = 'SCSI Generic Interface'  (string)
>  info.subsystem = 'scsi_generic'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_9005_80_scsi_host_scsi_device_lun0_scsi_generic'  (string)
>  linux.device_file = '/dev/sg0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_generic'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0'  (string)
>  scsi_generic.device = '/dev/sg0'  (string)
>
>udi = '/org/freedesktop/Hal/devices/pci_10de_221_0'
>  info.linux.driver = 'nvidia'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e'  (string)
>  info.product = 'NV44A [GeForce 6200]'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_221_0'  (string)
>  info.vendor = 'nVidia Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:09.0'  (string)
>  pci.device_class = 3  (0x3)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 0  (0x0)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:09.0'  (string)
>  pci.product = 'NV44A [GeForce 6200]'  (string)
>  pci.product_id = 545  (0x221)  (int)
>  pci.subsys_product_id = 0  (0x0)  (int)
>  pci.subsys_vendor_id = 0  (0x0)  (int)
>  pci.vendor = 'nVidia Corporation'  (string)
>  pci.vendor_id = 4318  (0x10de)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24dd'
>  info.linux.driver = 'ehci_hcd'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = '82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24dd'  (string)
>  info.vendor = 'Intel Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
>  pci.device_class = 12  (0xc)  (int)
>  pci.device_protocol = 32  (0x20)  (int)
>  pci.device_subclass = 3  (0x3)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
>  pci.product = '82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller'  (string)
>  pci.product_id = 9437  (0x24dd)  (int)
>  pci.subsys_product = 'P4P800/P5P800 series motherboard'  (string)
>  pci.subsys_product_id = 32934  (0x80a6)  (int)
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
>  pci.subsys_vendor_id = 4163  (0x1043)  (int)
>  pci.vendor = 'Intel Corporation'  (string)
>  pci.vendor_id = 32902  (0x8086)  (int)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
>  info.linux.driver = 'usb'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24dd'  (string)
>  info.product = '2.0 root hub'  (string)
>  info.subsystem = 'usb_device'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
>  info.vendor = 'Linux Foundation'  (string)
>  linux.device_file = '/dev/bus/usb/001/001'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1'  (string)
>  usb_device.bus_number = 1  (0x1)  (int)
>  usb_device.can_wake_up = true  (bool)
>  usb_device.configuration_value = 1  (0x1)  (int)
>  usb_device.device_class = 9  (0x9)  (int)
>  usb_device.device_protocol = 0  (0x0)  (int)
>  usb_device.device_revision_bcd = 518  (0x206)  (int)
>  usb_device.device_subclass = 0  (0x0)  (int)
>  usb_device.is_self_powered = true  (bool)
>  usb_device.linux.device_number = 1  (0x1)  (int)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1'  (string)
>  usb_device.max_power = 0  (0x0)  (int)
>  usb_device.num_configurations = 1  (0x1)  (int)
>  usb_device.num_interfaces = 1  (0x1)  (int)
>  usb_device.num_ports = 8  (0x8)  (int)
>  usb_device.product = '2.0 root hub'  (string)
>  usb_device.product_id = 2  (0x2)  (int)
>  usb_device.serial = '0000:00:1d.7'  (string)
>  usb_device.speed = 480.0 (480) (double)
>  usb_device.vendor = 'Linux Foundation'  (string)
>  usb_device.vendor_id = 7531  (0x1d6b)  (int)
>  usb_device.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_4a9_3116_noserial'
>  info.linux.driver = 'usb'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
>  info.product = 'Digital IXUS 750 (PTP mode)'  (string)
>  info.subsystem = 'usb_device'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4a9_3116_noserial'  (string)
>  info.vendor = 'Canon, Inc.'  (string)
>  linux.device_file = '/dev/bus/usb/001/011'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1'  (string)
>  usb_device.bus_number = 1  (0x1)  (int)
>  usb_device.can_wake_up = false  (bool)
>  usb_device.configuration_value = 1  (0x1)  (int)
>  usb_device.device_class = 0  (0x0)  (int)
>  usb_device.device_protocol = 0  (0x0)  (int)
>  usb_device.device_revision_bcd = 2  (0x2)  (int)
>  usb_device.device_subclass = 0  (0x0)  (int)
>  usb_device.is_self_powered = true  (bool)
>  usb_device.linux.device_number = 11  (0xb)  (int)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1'  (string)
>  usb_device.max_power = 2  (0x2)  (int)
>  usb_device.num_configurations = 1  (0x1)  (int)
>  usb_device.num_interfaces = 1  (0x1)  (int)
>  usb_device.num_ports = 0  (0x0)  (int)
>  usb_device.product = 'Digital IXUS 750 (PTP mode)'  (string)
>  usb_device.product_id = 12566  (0x3116)  (int)
>  usb_device.speed = 480.0 (480) (double)
>  usb_device.vendor = 'Canon, Inc.'  (string)
>  usb_device.vendor_id = 1193  (0x4a9)  (int)
>  usb_device.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_4a9_3116_noserial_if0'
>  access_control.file = '/dev/bus/usb/001/011'  (string)
>  access_control.type = 'camera'  (string)
>  camera.access_method = 'ptp'  (string)
>  camera.libgphoto2.name = 'USB PTP Class Camera'  (string)
>  camera.libgphoto2.support = true  (bool)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'camera', 'camera', 'camera', 'access_control'} (string list)
>  info.category = 'camera'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_4a9_3116_noserial'  (string)
>  info.product = 'USB Imaging Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4a9_3116_noserial_if0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0'  (string)
>  usb.bus_number = 1  (0x1)  (int)
>  usb.can_wake_up = false  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 0  (0x0)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 2  (0x2)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 6  (0x6)  (int)
>  usb.interface.number = 0  (0x0)  (int)
>  usb.interface.protocol = 1  (0x1)  (int)
>  usb.interface.subclass = 1  (0x1)  (int)
>  usb.is_self_powered = true  (bool)
>  usb.linux.device_number = 11  (0xb)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0'  (string)
>  usb.max_power = 2  (0x2)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 1  (0x1)  (int)
>  usb.num_ports = 0  (0x0)  (int)
>  usb.product = 'USB Imaging Interface'  (string)
>  usb.product_id = 12566  (0x3116)  (int)
>  usb.speed = 480.0 (480) (double)
>  usb.vendor = 'Canon, Inc.'  (string)
>  usb.vendor_id = 1193  (0x4a9)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2'
>  info.linux.driver = 'usb'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
>  info.product = 'QuickCam Pro 9000'  (string)
>  info.subsystem = 'usb_device'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2'  (string)
>  info.vendor = 'Logitech, Inc.'  (string)
>  linux.device_file = '/dev/bus/usb/001/004'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4'  (string)
>  usb_device.bus_number = 1  (0x1)  (int)
>  usb_device.can_wake_up = false  (bool)
>  usb_device.configuration_value = 1  (0x1)  (int)
>  usb_device.device_class = 239  (0xef)  (int)
>  usb_device.device_protocol = 1  (0x1)  (int)
>  usb_device.device_revision_bcd = 5  (0x5)  (int)
>  usb_device.device_subclass = 2  (0x2)  (int)
>  usb_device.is_self_powered = false  (bool)
>  usb_device.linux.device_number = 4  (0x4)  (int)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4'  (string)
>  usb_device.max_power = 500  (0x1f4)  (int)
>  usb_device.num_configurations = 1  (0x1)  (int)
>  usb_device.num_interfaces = 4  (0x4)  (int)
>  usb_device.num_ports = 0  (0x0)  (int)
>  usb_device.product = 'QuickCam Pro 9000'  (string)
>  usb_device.product_id = 2448  (0x990)  (int)
>  usb_device.serial = '52A98BD2'  (string)
>  usb_device.speed = 480.0 (480) (double)
>  usb_device.vendor = 'Logitech, Inc.'  (string)
>  usb_device.vendor_id = 1133  (0x46d)  (int)
>  usb_device.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if3'
>  info.linux.driver = 'snd-usb-audio'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2'  (string)
>  info.product = 'USB Audio Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if3'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.3'  (string)
>  usb.bus_number = 1  (0x1)  (int)
>  usb.can_wake_up = false  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 239  (0xef)  (int)
>  usb.device_protocol = 1  (0x1)  (int)
>  usb.device_revision_bcd = 5  (0x5)  (int)
>  usb.device_subclass = 2  (0x2)  (int)
>  usb.interface.class = 1  (0x1)  (int)
>  usb.interface.number = 3  (0x3)  (int)
>  usb.interface.protocol = 0  (0x0)  (int)
>  usb.interface.subclass = 2  (0x2)  (int)
>  usb.is_self_powered = false  (bool)
>  usb.linux.device_number = 4  (0x4)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.3'  (string)
>  usb.max_power = 500  (0x1f4)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 4  (0x4)  (int)
>  usb.num_ports = 0  (0x0)  (int)
>  usb.product = 'USB Audio Interface'  (string)
>  usb.product_id = 2448  (0x990)  (int)
>  usb.serial = '52A98BD2'  (string)
>  usb.speed = 480.0 (480) (double)
>  usb.vendor = 'Logitech, Inc.'  (string)
>  usb.vendor_id = 1133  (0x46d)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2'
>  info.linux.driver = 'snd-usb-audio'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2'  (string)
>  info.product = 'USB Audio Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.2'  (string)
>  usb.bus_number = 1  (0x1)  (int)
>  usb.can_wake_up = false  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 239  (0xef)  (int)
>  usb.device_protocol = 1  (0x1)  (int)
>  usb.device_revision_bcd = 5  (0x5)  (int)
>  usb.device_subclass = 2  (0x2)  (int)
>  usb.interface.class = 1  (0x1)  (int)
>  usb.interface.number = 2  (0x2)  (int)
>  usb.interface.protocol = 0  (0x0)  (int)
>  usb.interface.subclass = 1  (0x1)  (int)
>  usb.is_self_powered = false  (bool)
>  usb.linux.device_number = 4  (0x4)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.2'  (string)
>  usb.max_power = 500  (0x1f4)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 4  (0x4)  (int)
>  usb.num_ports = 0  (0x0)  (int)
>  usb.product = 'USB Audio Interface'  (string)
>  usb.product_id = 2448  (0x990)  (int)
>  usb.serial = '52A98BD2'  (string)
>  usb.speed = 480.0 (480) (double)
>  usb.vendor = 'Logitech, Inc.'  (string)
>  usb.vendor_id = 1133  (0x46d)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0'
>  info.capabilities = {'sound'} (string list)
>  info.category = 'sound'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2'  (string)
>  info.product = 'USB Device 0x46d:0x990 Sound Card'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.2/sound/card1'  (string)
>  sound.card = 1  (0x1)  (int)
>  sound.card_id = 'USB Device 0x46d:0x990'  (string)
>  sound.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2'  (string)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0_oss_pcm_0_0'
>  access_control.file = '/dev/audio1'  (string)
>  access_control.type = 'sound'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'oss', 'access_control'} (string list)
>  info.category = 'oss'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0'  (string)
>  info.product = 'USB Device 0x46d:0x990 OSS PCM Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0_oss_pcm_0_0'  (string)
>  linux.device_file = '/dev/audio1'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.2/sound/card1/audio1'  (string)
>  oss.card = 1  (0x1)  (int)
>  oss.card_id = 'USB Device 0x46d:0x990'  (string)
>  oss.device = 0  (0x0)  (int)
>  oss.device_file = '/dev/audio1'  (string)
>  oss.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0'  (string)
>  oss.type = 'pcm'  (string)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0_oss_pcm_0'
>  access_control.file = '/dev/dsp1'  (string)
>  access_control.type = 'sound'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'oss', 'access_control'} (string list)
>  info.category = 'oss'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0'  (string)
>  info.product = 'USB Device 0x46d:0x990 OSS PCM Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0_oss_pcm_0'  (string)
>  linux.device_file = '/dev/dsp1'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.2/sound/card1/dsp1'  (string)
>  oss.card = 1  (0x1)  (int)
>  oss.card_id = 'USB Device 0x46d:0x990'  (string)
>  oss.device = 0  (0x0)  (int)
>  oss.device_file = '/dev/dsp1'  (string)
>  oss.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0'  (string)
>  oss.type = 'pcm'  (string)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0_oss_mixer__1'
>  access_control.file = '/dev/mixer1'  (string)
>  access_control.type = 'sound'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'oss', 'access_control'} (string list)
>  info.category = 'oss'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0'  (string)
>  info.product = 'USB Device 0x46d:0x990 OSS Control Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0_oss_mixer__1'  (string)
>  linux.device_file = '/dev/mixer1'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.2/sound/card1/mixer1'  (string)
>  oss.card = 1  (0x1)  (int)
>  oss.card_id = 'USB Device 0x46d:0x990'  (string)
>  oss.device_file = '/dev/mixer1'  (string)
>  oss.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0'  (string)
>  oss.type = 'mixer'  (string)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0_alsa_capture_0'
>  access_control.file = '/dev/snd/pcmC1D0c'  (string)
>  access_control.type = 'sound'  (string)
>  alsa.card = 1  (0x1)  (int)
>  alsa.card_id = 'USB Device 0x46d:0x990'  (string)
>  alsa.device = 0  (0x0)  (int)
>  alsa.device_file = '/dev/snd/pcmC1D0c'  (string)
>  alsa.device_id = 'USB Audio'  (string)
>  alsa.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0'  (string)
>  alsa.pcm_class = 'generic'  (string)
>  alsa.type = 'capture'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'alsa', 'access_control'} (string list)
>  info.category = 'alsa'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0'  (string)
>  info.product = 'USB Audio ALSA Capture Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0_alsa_capture_0'  (string)
>  linux.device_file = '/dev/snd/pcmC1D0c'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.2/sound/card1/pcmC1D0c'  (string)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0_alsa_control__1'
>  access_control.file = '/dev/snd/controlC1'  (string)
>  access_control.type = 'sound'  (string)
>  alsa.card = 1  (0x1)  (int)
>  alsa.card_id = 'USB Device 0x46d:0x990'  (string)
>  alsa.device_file = '/dev/snd/controlC1'  (string)
>  alsa.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0'  (string)
>  alsa.type = 'control'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'alsa', 'access_control'} (string list)
>  info.category = 'alsa'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0'  (string)
>  info.product = 'USB Device 0x46d:0x990 ALSA Control Device'  (string)
>  info.subsystem = 'sound'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if2_sound_card_0_alsa_control__1'  (string)
>  linux.device_file = '/dev/snd/controlC1'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'sound'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.2/sound/card1/controlC1'  (string)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if1'
>  info.linux.driver = 'uvcvideo'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2'  (string)
>  info.product = 'USB Video Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if1'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.1'  (string)
>  usb.bus_number = 1  (0x1)  (int)
>  usb.can_wake_up = false  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 239  (0xef)  (int)
>  usb.device_protocol = 1  (0x1)  (int)
>  usb.device_revision_bcd = 5  (0x5)  (int)
>  usb.device_subclass = 2  (0x2)  (int)
>  usb.interface.class = 14  (0xe)  (int)
>  usb.interface.number = 1  (0x1)  (int)
>  usb.interface.protocol = 0  (0x0)  (int)
>  usb.interface.subclass = 2  (0x2)  (int)
>  usb.is_self_powered = false  (bool)
>  usb.linux.device_number = 4  (0x4)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.1'  (string)
>  usb.max_power = 500  (0x1f4)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 4  (0x4)  (int)
>  usb.num_ports = 0  (0x0)  (int)
>  usb.product = 'USB Video Interface'  (string)
>  usb.product_id = 2448  (0x990)  (int)
>  usb.serial = '52A98BD2'  (string)
>  usb.speed = 480.0 (480) (double)
>  usb.vendor = 'Logitech, Inc.'  (string)
>  usb.vendor_id = 1133  (0x46d)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if0'
>  info.linux.driver = 'uvcvideo'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2'  (string)
>  info.product = 'USB Video Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0'  (string)
>  usb.bus_number = 1  (0x1)  (int)
>  usb.can_wake_up = false  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 239  (0xef)  (int)
>  usb.device_protocol = 1  (0x1)  (int)
>  usb.device_revision_bcd = 5  (0x5)  (int)
>  usb.device_subclass = 2  (0x2)  (int)
>  usb.interface.class = 14  (0xe)  (int)
>  usb.interface.number = 0  (0x0)  (int)
>  usb.interface.protocol = 0  (0x0)  (int)
>  usb.interface.subclass = 1  (0x1)  (int)
>  usb.is_self_powered = false  (bool)
>  usb.linux.device_number = 4  (0x4)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0'  (string)
>  usb.max_power = 500  (0x1f4)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 4  (0x4)  (int)
>  usb.num_ports = 0  (0x0)  (int)
>  usb.product = 'USB Video Interface'  (string)
>  usb.product_id = 2448  (0x990)  (int)
>  usb.serial = '52A98BD2'  (string)
>  usb.speed = 480.0 (480) (double)
>  usb.vendor = 'Logitech, Inc.'  (string)
>  usb.vendor_id = 1133  (0x46d)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if0_video4linux'
>  access_control.file = '/dev/video0'  (string)
>  access_control.type = 'video4linux'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'video4linux', 'video4linux.video_capture', 'access_control'} (string list)
>  info.category = 'video4linux'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if0'  (string)
>  info.product = 'UVC Camera (046d:0990)'  (string)
>  info.subsystem = 'video4linux'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if0_video4linux'  (string)
>  linux.device_file = '/dev/video0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'video4linux'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/video4linux/video0'  (string)
>  video4linux.device = '/dev/video0'  (string)
>  video4linux.version = '2'  (string)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if0_logicaldev_input'
>  button.has_state = false  (bool)
>  info.addons.singleton = {'hald-addon-input'} (string list)
>  info.capabilities = {'input', 'button'} (string list)
>  info.category = 'input'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if0'  (string)
>  info.product = 'UVC Camera (046d:0990)'  (string)
>  info.subsystem = 'input'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if0_logicaldev_input'  (string)
>  input.device = '/dev/input/event7'  (string)
>  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_990_52A98BD2_if0'  (string)
>  input.product = 'UVC Camera (046d:0990)'  (string)
>  linux.device_file = '/dev/input/event7'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'input'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7/event7'  (string)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440'
>  info.linux.driver = 'usb'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
>  info.product = 'Stylus CX6500/6600'  (string)
>  info.subsystem = 'usb_device'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440'  (string)
>  info.vendor = 'Seiko Epson Corp.'  (string)
>  linux.device_file = '/dev/bus/usb/001/003'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3'  (string)
>  usb_device.bus_number = 1  (0x1)  (int)
>  usb_device.can_wake_up = false  (bool)
>  usb_device.configuration = 'USB2.0 MFP(Hi-Speed)'  (string)
>  usb_device.configuration_value = 1  (0x1)  (int)
>  usb_device.device_class = 0  (0x0)  (int)
>  usb_device.device_protocol = 0  (0x0)  (int)
>  usb_device.device_revision_bcd = 256  (0x100)  (int)
>  usb_device.device_subclass = 0  (0x0)  (int)
>  usb_device.is_self_powered = true  (bool)
>  usb_device.linux.device_number = 3  (0x3)  (int)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3'  (string)
>  usb_device.max_power = 2  (0x2)  (int)
>  usb_device.num_configurations = 1  (0x1)  (int)
>  usb_device.num_interfaces = 3  (0x3)  (int)
>  usb_device.num_ports = 0  (0x0)  (int)
>  usb_device.product = 'Stylus CX6500/6600'  (string)
>  usb_device.product_id = 2067  (0x813)  (int)
>  usb_device.serial = 'ND0100503182150440'  (string)
>  usb_device.speed = 480.0 (480) (double)
>  usb_device.vendor = 'Seiko Epson Corp.'  (string)
>  usb_device.vendor_id = 1208  (0x4b8)  (int)
>  usb_device.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2'
>  access_control.file = '/dev/bus/usb/001/003'  (string)
>  access_control.type = 'scanner'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'scanner', 'access_control'} (string list)
>  info.linux.driver = 'usb-storage'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440'  (string)
>  info.product = 'USB Mass Storage Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.2'  (string)
>  usb.bus_number = 1  (0x1)  (int)
>  usb.can_wake_up = false  (bool)
>  usb.configuration = 'USB2.0 MFP(Hi-Speed)'  (string)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 0  (0x0)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 256  (0x100)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 8  (0x8)  (int)
>  usb.interface.description = 'USB2.0 Mass Storage'  (string)
>  usb.interface.number = 2  (0x2)  (int)
>  usb.interface.protocol = 80  (0x50)  (int)
>  usb.interface.subclass = 6  (0x6)  (int)
>  usb.is_self_powered = true  (bool)
>  usb.linux.device_number = 3  (0x3)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.2'  (string)
>  usb.max_power = 2  (0x2)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 3  (0x3)  (int)
>  usb.num_ports = 0  (0x0)  (int)
>  usb.product = 'USB Mass Storage Interface'  (string)
>  usb.product_id = 2067  (0x813)  (int)
>  usb.serial = 'ND0100503182150440'  (string)
>  usb.speed = 480.0 (480) (double)
>  usb.vendor = 'Seiko Epson Corp.'  (string)
>  usb.vendor_id = 1208  (0x4b8)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2_scsi_host'
>  info.capabilities = {'scsi_host'} (string list)
>  info.category = 'scsi_host'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2'  (string)
>  info.product = 'SCSI Host Adapter'  (string)
>  info.subsystem = 'scsi_host'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2_scsi_host'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_host'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.2/host3'  (string)
>  scsi_host.host = 3  (0x3)  (int)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2_scsi_host_scsi_host'
>  info.capabilities = {'scsi_host'} (string list)
>  info.category = 'scsi_host'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2_scsi_host'  (string)
>  info.product = 'SCSI Host Adapter'  (string)
>  info.subsystem = 'scsi_host'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2_scsi_host_scsi_host'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_host'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.2/host3/scsi_host/host3'  (string)
>  scsi_host.host = 3  (0x3)  (int)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2_scsi_host_scsi_device_lun0'
>  info.linux.driver = 'sd'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2_scsi_host'  (string)
>  info.product = 'SCSI Device'  (string)
>  info.subsystem = 'scsi'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2_scsi_host_scsi_device_lun0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.2/host3/target3:0:0/3:0:0:0'  (string)
>  scsi.bus = 0  (0x0)  (int)
>  scsi.host = 3  (0x3)  (int)
>  scsi.lun = 0  (0x0)  (int)
>  scsi.model = 'Stylus Storage'  (string)
>  scsi.target = 0  (0x0)  (int)
>  scsi.type = 'disk'  (string)
>  scsi.vendor = 'EPSON'  (string)
>
>udi = '/org/freedesktop/Hal/devices/storage_serial_EPSON_Stylus_Storage_ND0100503182150440_0_0'
>  access_control.file = '/dev/sdd'  (string)
>  access_control.type = 'removable-block'  (string)
>  block.device = '/dev/sdd'  (string)
>  block.is_volume = false  (bool)
>  block.major = 8  (0x8)  (int)
>  block.minor = 48  (0x30)  (int)
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_EPSON_Stylus_Storage_ND0100503182150440_0_0'  (string)
>  info.addons = {'hald-addon-storage'} (string list)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'storage', 'block', 'access_control'} (string list)
>  info.category = 'storage'  (string)
>  info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2_scsi_host_scsi_device_lun0'  (string)
>  info.product = 'Stylus Storage'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_EPSON_Stylus_Storage_ND0100503182150440_0_0'  (string)
>  info.vendor = 'EPSON'  (string)
>  linux.hotplug_type = 3  (0x3)  (int)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.2/host3/target3:0:0/3:0:0:0/block/sdd'  (string)
>  storage.automount_enabled_hint = true  (bool)
>  storage.bus = 'usb'  (string)
>  storage.drive_type = 'disk'  (string)
>  storage.firmware_version = '1.00'  (string)
>  storage.hotpluggable = true  (bool)
>  storage.lun = 0  (0x0)  (int)
>  storage.media_check_enabled = true  (bool)
>  storage.model = 'Stylus Storage'  (string)
>  storage.no_partitions_hint = false  (bool)
>  storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2'  (string)
>  storage.partitioning_scheme = ''  (string)
>  storage.removable = true  (bool)
>  storage.removable.media_available = false  (bool)
>  storage.removable.media_size = 1017643008  (0x3ca80000)  (uint64)
>  storage.removable.support_async_notification = false  (bool)
>  storage.requires_eject = false  (bool)
>  storage.serial = 'EPSON_Stylus_Storage_ND0100503182150440-0:0'  (string)
>  storage.size = 0  (0x0)  (uint64)
>  storage.vendor = 'EPSON'  (string)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2_scsi_host_scsi_device_lun0_scsi_generic'
>  info.capabilities = {'scsi_generic'} (string list)
>  info.category = 'scsi_generic'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2_scsi_host_scsi_device_lun0'  (string)
>  info.product = 'SCSI Generic Interface'  (string)
>  info.subsystem = 'scsi_generic'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if2_scsi_host_scsi_device_lun0_scsi_generic'  (string)
>  linux.device_file = '/dev/sg6'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'scsi_generic'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.2/host3/target3:0:0/3:0:0:0/scsi_generic/sg6'  (string)
>  scsi_generic.device = '/dev/sg6'  (string)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if1'
>  access_control.file = '/dev/bus/usb/001/003'  (string)
>  access_control.type = 'scanner'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'scanner', 'access_control'} (string list)
>  info.linux.driver = 'usblp'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440'  (string)
>  info.product = 'USB Printer Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if1'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1'  (string)
>  usb.bus_number = 1  (0x1)  (int)
>  usb.can_wake_up = false  (bool)
>  usb.configuration = 'USB2.0 MFP(Hi-Speed)'  (string)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 0  (0x0)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 256  (0x100)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 7  (0x7)  (int)
>  usb.interface.description = 'USB2.0 Printer'  (string)
>  usb.interface.number = 1  (0x1)  (int)
>  usb.interface.protocol = 2  (0x2)  (int)
>  usb.interface.subclass = 1  (0x1)  (int)
>  usb.is_self_powered = true  (bool)
>  usb.linux.device_number = 3  (0x3)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1'  (string)
>  usb.max_power = 2  (0x2)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 3  (0x3)  (int)
>  usb.num_ports = 0  (0x0)  (int)
>  usb.product = 'USB Printer Interface'  (string)
>  usb.product_id = 2067  (0x813)  (int)
>  usb.serial = 'ND0100503182150440'  (string)
>  usb.speed = 480.0 (480) (double)
>  usb.vendor = 'Seiko Epson Corp.'  (string)
>  usb.vendor_id = 1208  (0x4b8)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if1_printer_noserial'
>  info.callouts.add = {'hal-cups-autoconfig --add --migrate-hal-printers'} (string list)
>  info.callouts.remove = {'hal-cups-autoconfig --disable'} (string list)
>  info.capabilities = {'printer'} (string list)
>  info.category = 'printer'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if1'  (string)
>  info.product = 'Stylus CX6600'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if1_printer_noserial'  (string)
>  info.vendor = 'EPSON'  (string)
>  linux.device_file = '/dev/usb/lp0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/usb/lp0'  (string)
>  printer.commandset = {'ESCPL2', 'BDC', 'D4'} (string list)
>  printer.configured_existing = true  (bool)
>  printer.description = 'EPSON Stylus CX6600'  (string)
>  printer.device = '/dev/usb/lp0'  (string)
>  printer.originating_device = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if1'  (string)
>  printer.product = 'Stylus CX6600'  (string)
>  printer.vendor = 'EPSON'  (string)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if0'
>  access_control.file = '/dev/bus/usb/001/003'  (string)
>  access_control.type = 'scanner'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'scanner', 'access_control'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440'  (string)
>  info.product = 'USB Vendor Specific Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_813_ND0100503182150440_if0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0'  (string)
>  usb.bus_number = 1  (0x1)  (int)
>  usb.can_wake_up = false  (bool)
>  usb.configuration = 'USB2.0 MFP(Hi-Speed)'  (string)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 0  (0x0)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 256  (0x100)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 255  (0xff)  (int)
>  usb.interface.description = 'EPSON Scanner'  (string)
>  usb.interface.number = 0  (0x0)  (int)
>  usb.interface.protocol = 255  (0xff)  (int)
>  usb.interface.subclass = 255  (0xff)  (int)
>  usb.is_self_powered = true  (bool)
>  usb.linux.device_number = 3  (0x3)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0'  (string)
>  usb.max_power = 2  (0x2)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 3  (0x3)  (int)
>  usb.num_ports = 0  (0x0)  (int)
>  usb.product = 'USB Vendor Specific Interface'  (string)
>  usb.product_id = 2067  (0x813)  (int)
>  usb.serial = 'ND0100503182150440'  (string)
>  usb.speed = 480.0 (480) (double)
>  usb.vendor = 'Seiko Epson Corp.'  (string)
>  usb.vendor_id = 1208  (0x4b8)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'
>  info.linux.driver = 'hub'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
>  info.product = 'USB Hub Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0'  (string)
>  usb.bus_number = 1  (0x1)  (int)
>  usb.can_wake_up = true  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 9  (0x9)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 518  (0x206)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 9  (0x9)  (int)
>  usb.interface.number = 0  (0x0)  (int)
>  usb.interface.protocol = 0  (0x0)  (int)
>  usb.interface.subclass = 0  (0x0)  (int)
>  usb.is_self_powered = true  (bool)
>  usb.linux.device_number = 1  (0x1)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0'  (string)
>  usb.max_power = 0  (0x0)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 1  (0x1)  (int)
>  usb.num_ports = 8  (0x8)  (int)
>  usb.product = 'USB Hub Interface'  (string)
>  usb.product_id = 2  (0x2)  (int)
>  usb.serial = '0000:00:1d.7'  (string)
>  usb.speed = 480.0 (480) (double)
>  usb.vendor = 'Linux Foundation'  (string)
>  usb.vendor_id = 7531  (0x1d6b)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24de'
>  info.linux.driver = 'uhci_hcd'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24de'  (string)
>  info.vendor = 'Intel Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3'  (string)
>  pci.device_class = 12  (0xc)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 3  (0x3)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3'  (string)
>  pci.product = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4'  (string)
>  pci.product_id = 9438  (0x24de)  (int)
>  pci.subsys_product = 'P4P800/P5P800 series motherboard'  (string)
>  pci.subsys_product_id = 32934  (0x80a6)  (int)
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
>  pci.subsys_vendor_id = 4163  (0x1043)  (int)
>  pci.vendor = 'Intel Corporation'  (string)
>  pci.vendor_id = 32902  (0x8086)  (int)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'
>  info.linux.driver = 'usb'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24de'  (string)
>  info.product = '1.1 root hub'  (string)
>  info.subsystem = 'usb_device'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'  (string)
>  info.vendor = 'Linux Foundation'  (string)
>  linux.device_file = '/dev/bus/usb/005/001'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5'  (string)
>  usb_device.bus_number = 5  (0x5)  (int)
>  usb_device.can_wake_up = true  (bool)
>  usb_device.configuration_value = 1  (0x1)  (int)
>  usb_device.device_class = 9  (0x9)  (int)
>  usb_device.device_protocol = 0  (0x0)  (int)
>  usb_device.device_revision_bcd = 518  (0x206)  (int)
>  usb_device.device_subclass = 0  (0x0)  (int)
>  usb_device.is_self_powered = true  (bool)
>  usb_device.linux.device_number = 1  (0x1)  (int)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5'  (string)
>  usb_device.max_power = 0  (0x0)  (int)
>  usb_device.num_configurations = 1  (0x1)  (int)
>  usb_device.num_interfaces = 1  (0x1)  (int)
>  usb_device.num_ports = 2  (0x2)  (int)
>  usb_device.product = '1.1 root hub'  (string)
>  usb_device.product_id = 1  (0x1)  (int)
>  usb_device.serial = '0000:00:1d.3'  (string)
>  usb_device.speed = 12.0 (12) (double)
>  usb_device.vendor = 'Linux Foundation'  (string)
>  usb_device.vendor_id = 7531  (0x1d6b)  (int)
>  usb_device.version = 1.1 (1.1) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial'
>  info.linux.driver = 'usb'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'  (string)
>  info.product = 'Comfort Curve Keyboard 2000'  (string)
>  info.subsystem = 'usb_device'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial'  (string)
>  info.vendor = 'Microsoft Corp.'  (string)
>  linux.device_file = '/dev/bus/usb/005/002'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1'  (string)
>  usb_device.bus_number = 5  (0x5)  (int)
>  usb_device.can_wake_up = true  (bool)
>  usb_device.configuration_value = 1  (0x1)  (int)
>  usb_device.device_class = 0  (0x0)  (int)
>  usb_device.device_protocol = 0  (0x0)  (int)
>  usb_device.device_revision_bcd = 371  (0x173)  (int)
>  usb_device.device_subclass = 0  (0x0)  (int)
>  usb_device.is_self_powered = false  (bool)
>  usb_device.linux.device_number = 2  (0x2)  (int)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1'  (string)
>  usb_device.max_power = 100  (0x64)  (int)
>  usb_device.num_configurations = 1  (0x1)  (int)
>  usb_device.num_interfaces = 2  (0x2)  (int)
>  usb_device.num_ports = 0  (0x0)  (int)
>  usb_device.product = 'Comfort Curve Keyboard 2000'  (string)
>  usb_device.product_id = 221  (0xdd)  (int)
>  usb_device.speed = 1.5 (1.5) (double)
>  usb_device.vendor = 'Microsoft Corp.'  (string)
>  usb_device.vendor_id = 1118  (0x45e)  (int)
>  usb_device.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial_if1'
>  info.linux.driver = 'usbhid'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial'  (string)
>  info.product = 'USB HID Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial_if1'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1'  (string)
>  usb.bus_number = 5  (0x5)  (int)
>  usb.can_wake_up = true  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 0  (0x0)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 371  (0x173)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 3  (0x3)  (int)
>  usb.interface.number = 1  (0x1)  (int)
>  usb.interface.protocol = 0  (0x0)  (int)
>  usb.interface.subclass = 0  (0x0)  (int)
>  usb.is_self_powered = false  (bool)
>  usb.linux.device_number = 2  (0x2)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1'  (string)
>  usb.max_power = 100  (0x64)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 2  (0x2)  (int)
>  usb.num_ports = 0  (0x0)  (int)
>  usb.product = 'USB HID Interface'  (string)
>  usb.product_id = 221  (0xdd)  (int)
>  usb.speed = 1.5 (1.5) (double)
>  usb.vendor = 'Microsoft Corp.'  (string)
>  usb.vendor_id = 1118  (0x45e)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial_if1_logicaldev_input'
>  info.addons.singleton = {'hald-addon-input'} (string list)
>  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
>  info.category = 'input'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial_if1'  (string)
>  info.product = 'Microsoft Comfort Curve Keyboard 2000'  (string)
>  info.subsystem = 'input'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial_if1_logicaldev_input'  (string)
>  input.device = '/dev/input/event3'  (string)
>  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial_if1'  (string)
>  input.product = 'Microsoft Comfort Curve Keyboard 2000'  (string)
>  input.x11_driver = 'evdev'  (string)
>  input.xkb.layout = 'us'  (string)
>  input.xkb.model = 'evdev'  (string)
>  input.xkb.rules = 'base'  (string)
>  input.xkb.variant = ''  (string)
>  linux.device_file = '/dev/input/event3'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'input'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input3/event3'  (string)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial_if0'
>  info.linux.driver = 'usbhid'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial'  (string)
>  info.product = 'USB HID Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial_if0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0'  (string)
>  usb.bus_number = 5  (0x5)  (int)
>  usb.can_wake_up = true  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 0  (0x0)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 371  (0x173)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 3  (0x3)  (int)
>  usb.interface.number = 0  (0x0)  (int)
>  usb.interface.protocol = 1  (0x1)  (int)
>  usb.interface.subclass = 1  (0x1)  (int)
>  usb.is_self_powered = false  (bool)
>  usb.linux.device_number = 2  (0x2)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0'  (string)
>  usb.max_power = 100  (0x64)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 2  (0x2)  (int)
>  usb.num_ports = 0  (0x0)  (int)
>  usb.product = 'USB HID Interface'  (string)
>  usb.product_id = 221  (0xdd)  (int)
>  usb.speed = 1.5 (1.5) (double)
>  usb.vendor = 'Microsoft Corp.'  (string)
>  usb.vendor_id = 1118  (0x45e)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial_if0_logicaldev_input'
>  info.addons.singleton = {'hald-addon-input'} (string list)
>  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
>  info.category = 'input'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial_if0'  (string)
>  info.product = 'Microsoft Comfort Curve Keyboard 2000'  (string)
>  info.subsystem = 'input'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial_if0_logicaldev_input'  (string)
>  input.device = '/dev/input/event2'  (string)
>  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_45e_dd_noserial_if0'  (string)
>  input.product = 'Microsoft Comfort Curve Keyboard 2000'  (string)
>  input.x11_driver = 'evdev'  (string)
>  input.xkb.layout = 'us'  (string)
>  input.xkb.model = 'evdev'  (string)
>  input.xkb.rules = 'base'  (string)
>  input.xkb.variant = ''  (string)
>  linux.device_file = '/dev/input/event2'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'input'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input2/event2'  (string)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0'
>  info.linux.driver = 'hub'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'  (string)
>  info.product = 'USB Hub Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0'  (string)
>  usb.bus_number = 5  (0x5)  (int)
>  usb.can_wake_up = true  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 9  (0x9)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 518  (0x206)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 9  (0x9)  (int)
>  usb.interface.number = 0  (0x0)  (int)
>  usb.interface.protocol = 0  (0x0)  (int)
>  usb.interface.subclass = 0  (0x0)  (int)
>  usb.is_self_powered = true  (bool)
>  usb.linux.device_number = 1  (0x1)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0'  (string)
>  usb.max_power = 0  (0x0)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 1  (0x1)  (int)
>  usb.num_ports = 2  (0x2)  (int)
>  usb.product = 'USB Hub Interface'  (string)
>  usb.product_id = 1  (0x1)  (int)
>  usb.serial = '0000:00:1d.3'  (string)
>  usb.speed = 12.0 (12) (double)
>  usb.vendor = 'Linux Foundation'  (string)
>  usb.vendor_id = 7531  (0x1d6b)  (int)
>  usb.version = 1.1 (1.1) (double)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d7'
>  info.linux.driver = 'uhci_hcd'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d7'  (string)
>  info.vendor = 'Intel Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'  (string)
>  pci.device_class = 12  (0xc)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 3  (0x3)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'  (string)
>  pci.product = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3'  (string)
>  pci.product_id = 9431  (0x24d7)  (int)
>  pci.subsys_product = 'P4P800/P5P800 series motherboard'  (string)
>  pci.subsys_product_id = 32934  (0x80a6)  (int)
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
>  pci.subsys_vendor_id = 4163  (0x1043)  (int)
>  pci.vendor = 'Intel Corporation'  (string)
>  pci.vendor_id = 32902  (0x8086)  (int)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'
>  info.linux.driver = 'usb'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d7'  (string)
>  info.product = '1.1 root hub'  (string)
>  info.subsystem = 'usb_device'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'  (string)
>  info.vendor = 'Linux Foundation'  (string)
>  linux.device_file = '/dev/bus/usb/004/001'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4'  (string)
>  usb_device.bus_number = 4  (0x4)  (int)
>  usb_device.can_wake_up = true  (bool)
>  usb_device.configuration_value = 1  (0x1)  (int)
>  usb_device.device_class = 9  (0x9)  (int)
>  usb_device.device_protocol = 0  (0x0)  (int)
>  usb_device.device_revision_bcd = 518  (0x206)  (int)
>  usb_device.device_subclass = 0  (0x0)  (int)
>  usb_device.is_self_powered = true  (bool)
>  usb_device.linux.device_number = 1  (0x1)  (int)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4'  (string)
>  usb_device.max_power = 0  (0x0)  (int)
>  usb_device.num_configurations = 1  (0x1)  (int)
>  usb_device.num_interfaces = 1  (0x1)  (int)
>  usb_device.num_ports = 2  (0x2)  (int)
>  usb_device.product = '1.1 root hub'  (string)
>  usb_device.product_id = 1  (0x1)  (int)
>  usb_device.serial = '0000:00:1d.2'  (string)
>  usb_device.speed = 12.0 (12) (double)
>  usb_device.vendor = 'Linux Foundation'  (string)
>  usb_device.vendor_id = 7531  (0x1d6b)  (int)
>  usb_device.version = 1.1 (1.1) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'
>  info.linux.driver = 'hub'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'  (string)
>  info.product = 'USB Hub Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0'  (string)
>  usb.bus_number = 4  (0x4)  (int)
>  usb.can_wake_up = true  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 9  (0x9)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 518  (0x206)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 9  (0x9)  (int)
>  usb.interface.number = 0  (0x0)  (int)
>  usb.interface.protocol = 0  (0x0)  (int)
>  usb.interface.subclass = 0  (0x0)  (int)
>  usb.is_self_powered = true  (bool)
>  usb.linux.device_number = 1  (0x1)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0'  (string)
>  usb.max_power = 0  (0x0)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 1  (0x1)  (int)
>  usb.num_ports = 2  (0x2)  (int)
>  usb.product = 'USB Hub Interface'  (string)
>  usb.product_id = 1  (0x1)  (int)
>  usb.serial = '0000:00:1d.2'  (string)
>  usb.speed = 12.0 (12) (double)
>  usb.vendor = 'Linux Foundation'  (string)
>  usb.vendor_id = 7531  (0x1d6b)  (int)
>  usb.version = 1.1 (1.1) (double)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d4'
>  info.linux.driver = 'uhci_hcd'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d4'  (string)
>  info.vendor = 'Intel Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
>  pci.device_class = 12  (0xc)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 3  (0x3)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
>  pci.product = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2'  (string)
>  pci.product_id = 9428  (0x24d4)  (int)
>  pci.subsys_product = 'P4P800/P5P800 series motherboard'  (string)
>  pci.subsys_product_id = 32934  (0x80a6)  (int)
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
>  pci.subsys_vendor_id = 4163  (0x1043)  (int)
>  pci.vendor = 'Intel Corporation'  (string)
>  pci.vendor_id = 32902  (0x8086)  (int)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
>  info.linux.driver = 'usb'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d4'  (string)
>  info.product = '1.1 root hub'  (string)
>  info.subsystem = 'usb_device'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'  (string)
>  info.vendor = 'Linux Foundation'  (string)
>  linux.device_file = '/dev/bus/usb/003/001'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3'  (string)
>  usb_device.bus_number = 3  (0x3)  (int)
>  usb_device.can_wake_up = true  (bool)
>  usb_device.configuration_value = 1  (0x1)  (int)
>  usb_device.device_class = 9  (0x9)  (int)
>  usb_device.device_protocol = 0  (0x0)  (int)
>  usb_device.device_revision_bcd = 518  (0x206)  (int)
>  usb_device.device_subclass = 0  (0x0)  (int)
>  usb_device.is_self_powered = true  (bool)
>  usb_device.linux.device_number = 1  (0x1)  (int)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3'  (string)
>  usb_device.max_power = 0  (0x0)  (int)
>  usb_device.num_configurations = 1  (0x1)  (int)
>  usb_device.num_interfaces = 1  (0x1)  (int)
>  usb_device.num_ports = 2  (0x2)  (int)
>  usb_device.product = '1.1 root hub'  (string)
>  usb_device.product_id = 1  (0x1)  (int)
>  usb_device.serial = '0000:00:1d.1'  (string)
>  usb_device.speed = 12.0 (12) (double)
>  usb_device.vendor = 'Linux Foundation'  (string)
>  usb_device.vendor_id = 7531  (0x1d6b)  (int)
>  usb_device.version = 1.1 (1.1) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
>  info.linux.driver = 'hub'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'  (string)
>  info.product = 'USB Hub Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0'  (string)
>  usb.bus_number = 3  (0x3)  (int)
>  usb.can_wake_up = true  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 9  (0x9)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 518  (0x206)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 9  (0x9)  (int)
>  usb.interface.number = 0  (0x0)  (int)
>  usb.interface.protocol = 0  (0x0)  (int)
>  usb.interface.subclass = 0  (0x0)  (int)
>  usb.is_self_powered = true  (bool)
>  usb.linux.device_number = 1  (0x1)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0'  (string)
>  usb.max_power = 0  (0x0)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 1  (0x1)  (int)
>  usb.num_ports = 2  (0x2)  (int)
>  usb.product = 'USB Hub Interface'  (string)
>  usb.product_id = 1  (0x1)  (int)
>  usb.serial = '0000:00:1d.1'  (string)
>  usb.speed = 12.0 (12) (double)
>  usb.vendor = 'Linux Foundation'  (string)
>  usb.vendor_id = 7531  (0x1d6b)  (int)
>  usb.version = 1.1 (1.1) (double)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_24d2'
>  info.linux.driver = 'uhci_hcd'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d2'  (string)
>  info.vendor = 'Intel Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
>  pci.device_class = 12  (0xc)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 3  (0x3)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
>  pci.product = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1'  (string)
>  pci.product_id = 9426  (0x24d2)  (int)
>  pci.subsys_product = 'P4P800/P5P800 series motherboard'  (string)
>  pci.subsys_product_id = 32934  (0x80a6)  (int)
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
>  pci.subsys_vendor_id = 4163  (0x1043)  (int)
>  pci.vendor = 'Intel Corporation'  (string)
>  pci.vendor_id = 32902  (0x8086)  (int)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'
>  info.linux.driver = 'usb'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d2'  (string)
>  info.product = '1.1 root hub'  (string)
>  info.subsystem = 'usb_device'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'  (string)
>  info.vendor = 'Linux Foundation'  (string)
>  linux.device_file = '/dev/bus/usb/002/001'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2'  (string)
>  usb_device.bus_number = 2  (0x2)  (int)
>  usb_device.can_wake_up = true  (bool)
>  usb_device.configuration_value = 1  (0x1)  (int)
>  usb_device.device_class = 9  (0x9)  (int)
>  usb_device.device_protocol = 0  (0x0)  (int)
>  usb_device.device_revision_bcd = 518  (0x206)  (int)
>  usb_device.device_subclass = 0  (0x0)  (int)
>  usb_device.is_self_powered = true  (bool)
>  usb_device.linux.device_number = 1  (0x1)  (int)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2'  (string)
>  usb_device.max_power = 0  (0x0)  (int)
>  usb_device.num_configurations = 1  (0x1)  (int)
>  usb_device.num_interfaces = 1  (0x1)  (int)
>  usb_device.num_ports = 2  (0x2)  (int)
>  usb_device.product = '1.1 root hub'  (string)
>  usb_device.product_id = 1  (0x1)  (int)
>  usb_device.serial = '0000:00:1d.0'  (string)
>  usb_device.speed = 12.0 (12) (double)
>  usb_device.vendor = 'Linux Foundation'  (string)
>  usb_device.vendor_id = 7531  (0x1d6b)  (int)
>  usb_device.version = 1.1 (1.1) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_3f0_3d11_CN55NGI4KDE5'
>  info.linux.driver = 'usb'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'  (string)
>  info.product = 'OfficeJet 4215'  (string)
>  info.subsystem = 'usb_device'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_3d11_CN55NGI4KDE5'  (string)
>  info.vendor = 'Hewlett-Packard'  (string)
>  linux.device_file = '/dev/bus/usb/002/002'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2'  (string)
>  usb_device.bus_number = 2  (0x2)  (int)
>  usb_device.can_wake_up = false  (bool)
>  usb_device.configuration_value = 1  (0x1)  (int)
>  usb_device.device_class = 0  (0x0)  (int)
>  usb_device.device_protocol = 0  (0x0)  (int)
>  usb_device.device_revision_bcd = 256  (0x100)  (int)
>  usb_device.device_subclass = 0  (0x0)  (int)
>  usb_device.is_self_powered = true  (bool)
>  usb_device.linux.device_number = 2  (0x2)  (int)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2'  (string)
>  usb_device.max_power = 2  (0x2)  (int)
>  usb_device.num_configurations = 1  (0x1)  (int)
>  usb_device.num_interfaces = 3  (0x3)  (int)
>  usb_device.num_ports = 0  (0x0)  (int)
>  usb_device.product = 'OfficeJet 4215'  (string)
>  usb_device.product_id = 15633  (0x3d11)  (int)
>  usb_device.serial = 'CN55NGI4KDE5'  (string)
>  usb_device.speed = 12.0 (12) (double)
>  usb_device.vendor = 'Hewlett-Packard'  (string)
>  usb_device.vendor_id = 1008  (0x3f0)  (int)
>  usb_device.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_3f0_3d11_CN55NGI4KDE5_if2'
>  access_control.file = '/dev/bus/usb/002/002'  (string)
>  access_control.type = 'scanner'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'scanner', 'scanner', 'access_control'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_3d11_CN55NGI4KDE5'  (string)
>  info.product = 'USB Vendor Specific Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_3d11_CN55NGI4KDE5_if2'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2'  (string)
>  usb.bus_number = 2  (0x2)  (int)
>  usb.can_wake_up = false  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 0  (0x0)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 256  (0x100)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 255  (0xff)  (int)
>  usb.interface.number = 2  (0x2)  (int)
>  usb.interface.protocol = 255  (0xff)  (int)
>  usb.interface.subclass = 255  (0xff)  (int)
>  usb.is_self_powered = true  (bool)
>  usb.linux.device_number = 2  (0x2)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2'  (string)
>  usb.max_power = 2  (0x2)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 3  (0x3)  (int)
>  usb.num_ports = 0  (0x0)  (int)
>  usb.product = 'USB Vendor Specific Interface'  (string)
>  usb.product_id = 15633  (0x3d11)  (int)
>  usb.serial = 'CN55NGI4KDE5'  (string)
>  usb.speed = 12.0 (12) (double)
>  usb.vendor = 'Hewlett-Packard'  (string)
>  usb.vendor_id = 1008  (0x3f0)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_3f0_3d11_CN55NGI4KDE5_if0'
>  access_control.file = '/dev/bus/usb/002/002'  (string)
>  access_control.type = 'scanner'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'scanner', 'scanner', 'access_control'} (string list)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_3d11_CN55NGI4KDE5'  (string)
>  info.product = 'USB Vendor Specific Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_3d11_CN55NGI4KDE5_if0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0'  (string)
>  usb.bus_number = 2  (0x2)  (int)
>  usb.can_wake_up = false  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 0  (0x0)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 256  (0x100)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 255  (0xff)  (int)
>  usb.interface.number = 0  (0x0)  (int)
>  usb.interface.protocol = 0  (0x0)  (int)
>  usb.interface.subclass = 204  (0xcc)  (int)
>  usb.is_self_powered = true  (bool)
>  usb.linux.device_number = 2  (0x2)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0'  (string)
>  usb.max_power = 2  (0x2)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 3  (0x3)  (int)
>  usb.num_ports = 0  (0x0)  (int)
>  usb.product = 'USB Vendor Specific Interface'  (string)
>  usb.product_id = 15633  (0x3d11)  (int)
>  usb.serial = 'CN55NGI4KDE5'  (string)
>  usb.speed = 12.0 (12) (double)
>  usb.vendor = 'Hewlett-Packard'  (string)
>  usb.vendor_id = 1008  (0x3f0)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_3f0_3d11_CN55NGI4KDE5_if1'
>  access_control.file = '/dev/bus/usb/002/002'  (string)
>  access_control.type = 'scanner'  (string)
>  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
>  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
>  info.capabilities = {'scanner', 'scanner', 'access_control'} (string list)
>  info.linux.driver = 'usblp'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_3d11_CN55NGI4KDE5'  (string)
>  info.product = 'USB Printer Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_3d11_CN55NGI4KDE5_if1'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1'  (string)
>  usb.bus_number = 2  (0x2)  (int)
>  usb.can_wake_up = false  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 0  (0x0)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 256  (0x100)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 7  (0x7)  (int)
>  usb.interface.number = 1  (0x1)  (int)
>  usb.interface.protocol = 2  (0x2)  (int)
>  usb.interface.subclass = 1  (0x1)  (int)
>  usb.is_self_powered = true  (bool)
>  usb.linux.device_number = 2  (0x2)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1'  (string)
>  usb.max_power = 2  (0x2)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 3  (0x3)  (int)
>  usb.num_ports = 0  (0x0)  (int)
>  usb.product = 'USB Printer Interface'  (string)
>  usb.product_id = 15633  (0x3d11)  (int)
>  usb.serial = 'CN55NGI4KDE5'  (string)
>  usb.speed = 12.0 (12) (double)
>  usb.vendor = 'Hewlett-Packard'  (string)
>  usb.vendor_id = 1008  (0x3f0)  (int)
>  usb.version = 2.0 (2) (double)
>
>udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'
>  info.linux.driver = 'hub'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'  (string)
>  info.product = 'USB Hub Interface'  (string)
>  info.subsystem = 'usb'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'usb'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0'  (string)
>  usb.bus_number = 2  (0x2)  (int)
>  usb.can_wake_up = true  (bool)
>  usb.configuration_value = 1  (0x1)  (int)
>  usb.device_class = 9  (0x9)  (int)
>  usb.device_protocol = 0  (0x0)  (int)
>  usb.device_revision_bcd = 518  (0x206)  (int)
>  usb.device_subclass = 0  (0x0)  (int)
>  usb.interface.class = 9  (0x9)  (int)
>  usb.interface.number = 0  (0x0)  (int)
>  usb.interface.protocol = 0  (0x0)  (int)
>  usb.interface.subclass = 0  (0x0)  (int)
>  usb.is_self_powered = true  (bool)
>  usb.linux.device_number = 1  (0x1)  (int)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0'  (string)
>  usb.max_power = 0  (0x0)  (int)
>  usb.num_configurations = 1  (0x1)  (int)
>  usb.num_interfaces = 1  (0x1)  (int)
>  usb.num_ports = 2  (0x2)  (int)
>  usb.product = 'USB Hub Interface'  (string)
>  usb.product_id = 1  (0x1)  (int)
>  usb.serial = '0000:00:1d.0'  (string)
>  usb.speed = 12.0 (12) (double)
>  usb.vendor = 'Linux Foundation'  (string)
>  usb.vendor_id = 7531  (0x1d6b)  (int)
>  usb.version = 1.1 (1.1) (double)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_2571'
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = '82865G/PE/P PCI to AGP Controller'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2571'  (string)
>  info.vendor = 'Intel Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'  (string)
>  pci.device_class = 6  (0x6)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 4  (0x4)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'  (string)
>  pci.product = '82865G/PE/P PCI to AGP Controller'  (string)
>  pci.product_id = 9585  (0x2571)  (int)
>  pci.subsys_product_id = 0  (0x0)  (int)
>  pci.subsys_vendor_id = 0  (0x0)  (int)
>  pci.vendor = 'Intel Corporation'  (string)
>  pci.vendor_id = 32902  (0x8086)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_10de_221'
>  info.linux.driver = 'nvidia'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2571'  (string)
>  info.product = 'NV44A [GeForce 6200]'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_221'  (string)
>  info.vendor = 'nVidia Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'  (string)
>  pci.device_class = 3  (0x3)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 0  (0x0)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'  (string)
>  pci.product = 'NV44A [GeForce 6200]'  (string)
>  pci.product_id = 545  (0x221)  (int)
>  pci.subsys_product_id = 0  (0x0)  (int)
>  pci.subsys_vendor_id = 0  (0x0)  (int)
>  pci.vendor = 'nVidia Corporation'  (string)
>  pci.vendor_id = 4318  (0x10de)  (int)
>
>udi = '/org/freedesktop/Hal/devices/pci_8086_2570'
>  info.linux.driver = 'agpgart-intel'  (string)
>  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>  info.product = '82865G/PE/P DRAM Controller/Host-Hub Interface'  (string)
>  info.subsystem = 'pci'  (string)
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2570'  (string)
>  info.vendor = 'Intel Corporation'  (string)
>  linux.hotplug_type = 2  (0x2)  (int)
>  linux.subsystem = 'pci'  (string)
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
>  pci.device_class = 6  (0x6)  (int)
>  pci.device_protocol = 0  (0x0)  (int)
>  pci.device_subclass = 0  (0x0)  (int)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
>  pci.product = '82865G/PE/P DRAM Controller/Host-Hub Interface'  (string)
>  pci.product_id = 9584  (0x2570)  (int)
>  pci.subsys_product_id = 33111  (0x8157)  (int)
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
>  pci.subsys_vendor_id = 4163  (0x1043)  (int)
>  pci.vendor = 'Intel Corporation'  (string)
>  pci.vendor_id = 32902  (0x8086)  (int)
>
>
>Dumped 139 device(s) from the Global Device List.
>------------------------------------------------
>

Actions: View

Attachments on bug 467268: 270663 | 270664 | 275152 | 275153 | 275154 | 275156