Attachment 280180 Details for Bug 471741

output as requested 02

dmeseg-no-read02-txt (text/plain), 32.84 KB, created by Scott Couston on 2009-03-18 03:26:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Scott Couston

Created: 2009-03-18 03:26:23 UTC

Size: 32.84 KB

patch

obsolete

>syslog@linux-ncbv:~> su
>Password:
>linux-ncbv:/home/syslog # dmeseg
>bash: dmeseg: command not found
>linux-ncbv:/home/syslog # dmesg
>Linux version 2.6.25.5-1.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-06-07 01:55:22 +0200
>Command line: root=/dev/disk/by-id/scsi-SATA_ST3320620A_9QF7GHHB-part1 resume=/dev/sda2 splash=silent vga=0x31a
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000006fff0000 (usable)
> BIOS-e820: 000000006fff0000 - 000000006fff3000 (ACPI NVS)
> BIOS-e820: 000000006fff3000 - 0000000070000000 (ACPI data)
> BIOS-e820: 0000000070000000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e8000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 458736) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000F6370, 0014 (r0 GBT   )
>ACPI: RSDT 6FFF3000, 0034 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
>ACPI: FACP 6FFF3040, 0074 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
>ACPI: DSDT 6FFF30C0, 45BD (r1 GBT    NVDAACPI     1000 MSFT  100000C)
>ACPI: FACS 6FFF0000, 0040
>ACPI: HPET 6FFF7740, 0038 (r1 GBT    NVDAACPI 42302E31 NVDA       98)
>ACPI: MCFG 6FFF7780, 003C (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
>ACPI: APIC 6FFF7680, 0098 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000006fff0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 458736) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000006fff0000
>  NODE_DATA [000000000000c000 - 0000000000013fff]
>  bootmap [0000000000014000 -  0000000000021fff] pages e
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-8b5bd7] TEXT DATA BSS
>early res: 3 [37a58000-37fefa8a] RAMDISK
>early res: 4 [9f800-a07ff] EBDA
>early res: 5 [8000-bfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   458736
>On node 0 totalpages: 458639
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1727 pages reserved
>  DMA zone: 2216 pages, LIFO batch:0
>  DMA32 zone: 6215 pages used for memmap
>  DMA32 zone: 448425 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x10dea201 base: 0xfeff0000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:68000000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 47936 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 450641
>Policy zone: DMA32
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST3320620A_9QF7GHHB-part1 resume=/dev/sda2 splash=silent vga=0x31a
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 2511.419 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>Node 0: aperture @ c400000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>No AGP bridge found
>Memory: 1794908k/1834944k available (2365k kernel code, 39648k reserved, 1920k data, 404k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 5027.66 BogoMIPS (lpj=10055335)
>Security Framework initialized
>AppArmor: AppArmor initialized <NULL>
>AppArmor: Registered secondary security module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>ACPI: Core revision 20070126
>ACPI: Checking initramfs for custom DSDT
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 785 Objects with 89 Devices 300 Methods 33 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>APIC timer calibration result 12557116
>Detected 12.557 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5022.91 BogoMIPS (lpj=10045832)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 02
>Brought up 2 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>net_namespace: 1016 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e8000000 - efffffff
>PCI: Using configuration type 1
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int0x9
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 20 to 5F [_GPE] 8 regs on int0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:.........................................................................
>Initialized 28/33 Regions 1/1 Fields 35/35 Buffers 9/17 Packages (794 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:.
>Executed 1 _INI methods requiring 1 _STA executions (examined 95 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:04.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>AppArmor: AppArmor Filesystem Enabled
>ACPI: RTC can wake from S4
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>system 00:01: ioport range 0x1000-0x107f has been reserved
>system 00:01: ioport range 0x1080-0x10ff has been reserved
>system 00:01: ioport range 0x1400-0x147f has been reserved
>system 00:01: ioport range 0x1480-0x14ff has been reserved
>system 00:01: ioport range 0x1800-0x187f has been reserved
>system 00:01: ioport range 0x1880-0x18ff has been reserved
>system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
>system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
>system 00:01: iomem range 0x70000000-0x7fffffff could not be reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x87f has been reserved
>system 00:02: ioport range 0x295-0x314 has been reserved
>system 00:02: ioport range 0x290-0x294 has been reserved
>system 00:0d: iomem range 0xe8000000-0xefffffff could not be reserved
>system 00:0e: iomem range 0xd0000-0xd3fff has been reserved
>system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0e: iomem range 0x6fff0000-0x6fffffff could not be reserved
>system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0x100000-0x6ffeffff could not be reserved
>system 00:0e: iomem range 0x70000000-0x7fffffff could not be reserved
>system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
>PCI: Bridge: 0000:00:04.0
>  IO window: b000-bfff
>  MEM window: 0xf1000000-0xf2ffffff
>  PREFETCH window: 0x00000000e0000000-0x00000000e7ffffff
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>Unpacking initramfs... done
>Freeing initrd memory: 5726k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1237377538.636:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Enabling HT MSI Mapping
>pci 0000:00:04.0: Enabling HT MSI Mapping
>pci 0000:00:05.0: Enabling HT MSI Mapping
>pci 0000:00:07.0: Enabling HT MSI Mapping
>pci 0000:00:08.0: Enabling HT MSI Mapping
>pci 0000:00:0d.0: Boot video device
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20008980000, using 10240k, total 262144k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 208945 bytes
>bootsplash: ...found (1280x1024, 220863 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>hpet_resources: 0xfeff0000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>input: PC Speaker as /devices/platform/pcspkr/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>NET: Registered protocol family 1
>registered taskstats version 1
>Freeing unused kernel memory: 404k freed
>Write protecting the kernel read-only data: 1680k
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: ACPI0007:01 is registered as cooling_device1
>No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>sata_nv 0000:00:08.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 23 (level, low) ->IRQ 23
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
>ata1: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 300)
>pata_amd 0000:00:06.0: version 0.3.10
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>scsi2 : pata_amd
>scsi3 : pata_amd
>ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata3.00: HPA unlocked: 625140335 -> 625142448, native 625142448
>ata3.00: ATA-7: ST3320620A, 3.AAF, max UDMA/100
>ata3.00: 625142448 sectors, multi 16: LBA48
>ata3.01: ATAPI: LITE-ON COMBO SOHC-5236V, R$0G, max UDMA/44
>ata3: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c40000) ACPI=0x3f01f (20:45:0x1f)
>ata3: nv_mode_filter: 0xf39f&0xf01f->0xf01f, BIOS=0xf000 (0xc6c40000) ACPI=0xf01f (20:45:0x1f)
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/44
>ata4: port disabled. ignoring.
>scsi 2:0:0:0: Direct-Access     ATA      ST3320620A       3.AA PQ: 0 ANSI: 5
>scsi 2:0:1:0: CD-ROM            LITE-ON  COMBO SOHC-5236V R$0G PQ: 0 ANSI: 5
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Driver 'sd' needs updating - please use bus_type methods
>sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) ->IRQ 22
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 22, io mem 0xf5005000
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't supportDPO or FUA
>sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't supportDPO or FUA
> sda: sda1 sda2 sda3 sda4
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>sd 2:0:0:0: [sda] Attached SCSI disk
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.5-1.1-default ohci_hcd
>usb usb1: SerialNumber: 0000:00:02.0
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 21 (level, low) ->IRQ 21
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 21, io mem 0xf5004000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.5-1.1-default ehci_hcd
>usb usb2: SerialNumber: 0000:00:02.1
>PM: Starting manual resume from disk
>hub 2-0:1.0: unable to enumerate USB device on port 4
>usb 1-4: new low speed USB device using ohci_hcd and address 2
>usb 1-4: configuration #1 chosen from 1 choice
>usb 1-4: New USB device found, idVendor=045e, idProduct=0083
>usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-4: Product: Basic Optical Mouse
>usb 1-4: Manufacturer: Microsoft
>usbcore: registered new interface driver hiddev
>input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input2
>input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:02.0-4
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>scsi 2:0:1:0: Attached scsi generic sg1 type 5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0xc400
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button (CM) [PWRB]
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 20 (level, low) ->IRQ 20
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 23 (level, low) ->IRQ 23
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>Floppy drive(s): fd0 is 1.44M
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:1:0: Attached scsi CD-ROM sr0
>FDC 0 is a post-1991 82077
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>IT8716 SuperIO detected.
>parport_pc 00:0b: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:1d:7d:b8:9b:ee
>forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
>ppdev: user-space parallel port driver
>Adding 20972848k swap on /dev/sda2.  Priority:-1 extents:1 across:20972848k
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>type=1505 audit(1237341558.635:2): operation="profile_load" name="/bin/ping"name2="default" pid=1399
>type=1505 audit(1237341558.691:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1416
>type=1505 audit(1237341558.767:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1419
>type=1505 audit(1237341558.899:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1423
>type=1505 audit(1237341558.931:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1438
>type=1505 audit(1237341558.979:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1455
>type=1505 audit(1237341559.043:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1474
>type=1505 audit(1237341559.123:9): operation="profile_load" name="/usr/sbin/n
>scd" name2="default" pid=1479
>type=1505 audit(1237341559.187:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1495
>type=1505 audit(1237341559.219:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1513
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ processors (2 cpu cores) (version 2.20.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>NET: Registered protocol family 17
>eth0: no IPv6 routers present
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=383 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=363
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=266 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=246
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=383 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=363
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=184 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=164
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=570 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=550
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=250 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=230
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=289 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=269
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1d:7d:b8:9b:ee:00:0f:3d:55:c2:34:08:00 SRC=192.168.1.1 DST=192.168.1.2 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=65286 PROTO=UDP SPT=67 DPT=68 LEN=308
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1d:7d:b8:9b:ee:00:0f:3d:55:c2:34:08:00 SRC=192.168.1.1 DST=192.168.1.2 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=63492 PROTO=UDP SPT=67 DPT=68 LEN=308
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1d:7d:b8:9b:ee:00:0f:3d:55:c2:34:08:00 SRC=192.168.1.1 DST=192.168.1.2 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=23722 PROTO=UDP SPT=67 DPT=68 LEN=308
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=570 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=550
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=383 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=363
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=266 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=246
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=383 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=363
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=383 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=363
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:8c:9d:b5:0b:08:00 SRC=192.168.100.20 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
>linux-ncbv:/home/syslog #

Actions: View

Attachments on bug 471741: 280179 | 280180 | 280181