Attachment 283527 Details for Bug 466484

kernel session log for a session without hang but without umount of rootfs

boot.omsg (text/plain), 46.92 KB, created by Diego Ercolani on 2009-04-01 19:36:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Diego Ercolani

Created: 2009-04-01 19:36:13 UTC

Size: 46.92 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.27.19-3.2-default
>Cannot find map file.
>No module symbols loaded - kernel modules not enabled.
>
>Cannot build symbol table - disabling symbol lookups
>klogd 1.4.1, log source = ksyslog started.
><6>Initializing cgroup subsys cpuset
><6>Initializing cgroup subsys cpu
><5>Linux version 2.6.27.19-3.2-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-02-25 15:40:44 +0100
><6>Command line: splash=silent
><4>KERNEL supported cpus:
><4>  Intel GenuineIntel
><4>  AMD AuthenticAMD
><4>  Centaur CentaurHauls
><6>BIOS-provided physical RAM map:
><6> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><6> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><6> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
><6> BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
><6> BIOS-e820: 000000007ffc0000 - 000000007ffd0000 (ACPI data)
><6> BIOS-e820: 000000007ffd0000 - 0000000080000000 (ACPI NVS)
><6> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
><6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
><6> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
><6>DMI 2.3 present.
><5>AMI BIOS detected: BIOS may corrupt low RAM, working it around.
><6>last_pfn = 0x7ffc0 max_arch_pfn = 0x3ffffffff
><6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
><6>init_memory_mapping
><7> 0000000000 - 007fe00000 page 2M
><7> 007fe00000 - 007ffc0000 page 4k
><7>kernel direct mapping tables up to 7ffc0000 @ 10000-14000
><6>last_map_addr: 7ffc0000 end: 7ffc0000
><6>RAMDISK: 37a88000 - 37fef185
><4>ACPI: RSDP 000F9CB0, 0021 (r2 ACPIAM)
><4>ACPI: XSDT 7FFC0100, 003C (r1 A M I  OEMXSDT   9000507 MSFT       97)
><4>ACPI: FACP 7FFC0290, 00F4 (r3 A M I  OEMFACP   9000507 MSFT       97)
><4>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 00000000000044A0/0 [20080609]
><4>ACPI: DSDT 7FFC0400, 4524 (r1  A0055 A0055003        3 INTL  2002026)
><4>ACPI: FACS 7FFD0000, 0040
><4>ACPI: APIC 7FFC0390, 0068 (r1 A M I  OEMAPIC   9000507 MSFT       97)
><4>ACPI: OEMB 7FFD0040, 0041 (r1 A M I  OEMBIOS   9000507 MSFT       97)
><7>ACPI: Local APIC address 0xfee00000
><6>Scanning NUMA topology in Northbridge 24
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-000000007ffc0000
><6>Bootmem setup node 0 0000000000000000-000000007ffc0000
><6>  NODE_DATA [0000000000012000 - 0000000000029fff]
><6>  bootmap [000000000002a000 -  0000000000039ff7] pages 10
><6>(6 early reservations) ==> bootmem [0000000000 - 007ffc0000]
><6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
><6>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
><6>  #2 [0000200000 - 0000bc98b8]    TEXT DATA BSS ==> [0000200000 - 0000bc98b8]
><6>  #3 [0037a88000 - 0037fef185]          RAMDISK ==> [0037a88000 - 0037fef185]
><6>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
><6>  #5 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
><6>found SMP MP-table at [ffff8800000ff780] 000ff780
><7> [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0
><4>Zone PFN ranges:
><4>  DMA      0x00000010 -> 0x00001000
><4>  DMA32    0x00001000 -> 0x00100000
><4>  Normal   0x00100000 -> 0x00100000
><4>Movable zone start PFN for each node
><4>early_node_map[2] active PFN ranges
><4>    0: 0x00000010 -> 0x0000009f
><4>    0: 0x00000100 -> 0x0007ffc0
><7>On node 0 totalpages: 524111
><7>  DMA zone: 1311 pages, LIFO batch:0
><7>  DMA32 zone: 512001 pages, LIFO batch:31
><6>Nvidia board detected. Ignoring ACPI timer override.
><6>If you got timer trouble try acpi_use_timer_override
><6>ACPI: PM-Timer IO Port: 0x4008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><4>ACPI: BIOS IRQ0 pin2 override ignored.
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
><7>ACPI: IRQ9 used by override.
><7>ACPI: IRQ14 used by override.
><7>ACPI: IRQ15 used by override.
><6>Using ACPI (MADT) for SMP configuration information
><6>SMP: Allowing 1 CPUs, 0 hotplug CPUs
><6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
><6>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
><6>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
><6>PERCPU: Allocating 61344 bytes of per cpu data
><7>NR_CPUS: 512, nr_cpu_ids: 1, nr_node_ids 1
><4>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513312
><4>Policy zone: DMA32
><5>Kernel command line: splash=silent
><6>bootsplash: silent mode.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>Extended CMOS year: 2000
><6>TSC: PIT calibration confirmed by PMTIMER.
><6>TSC: using PIT calibration value
><4>Detected 1889.969 MHz processor.
><7>spurious 8259A interrupt: IRQ7.
><4>Console: colour VGA+ 80x25
><6>console [tty0] enabled
><6>Checking aperture...
><6>AGP bridge at 00:00:00
><6>Aperture from AGP @ f0000000 old size 32 MB
><6>Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
><6>Aperture from AGP @ f0000000 size 32 MB (APSIZE 0)
><6>Node 0: aperture @ 72f0000000 size 128 MB
><3>Aperture beyond 4GB. Ignoring.
><6>Memory: 2047612k/2096896k available (2699k kernel code, 48832k reserved, 3164k data, 788k init)
><7>CPA: page pool initialized 1 of 1 pages preallocated
><6>Calibrating delay loop (skipped), value calculated using timer frequency.. 3779.93 BogoMIPS (lpj=7559876)
><4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
><6>Security Framework initialized
><6>AppArmor: AppArmor initialized
><6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><6>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Mount-cache hash table entries: 256
><6>Initializing cgroup subsys ns
><6>Initializing cgroup subsys cpuacct
><6>Initializing cgroup subsys memory
><6>Initializing cgroup subsys devices
><6>Initializing cgroup subsys freezer
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 256K (64 bytes/line)
><6>CPU 0/0 -> Node 0
><7>tseg: 0000000000
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 25k freed
><6>ACPI: Core revision 20080609
><6>ACPI: Checking initramfs for custom DSDT
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 678 Objects with 67 Devices 223 Methods 22 Regions
><4> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><6>Setting APIC routing to flat
><6>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
><6>CPU0: AMD Sempron(tm) Processor 3100+ stepping 00
><6>Using local APIC timer interrupts.
><7>APIC timer calibration result 13124791
><6>Detected 13.124 MHz APIC timer.
><6>Brought up 1 CPUs
><6>Total of 1 processors activated (3779.93 BogoMIPS).
><7>CPU0 attaching NULL sched-domain.
><6>net_namespace: 1936 bytes
><6>NET: Registered protocol family 16
><7>node 0 link 0: io port [1000, ffffff]
><6>TOM: 0000000080000000 aka 2048M
><7>node 0 link 0: mmio [a0000, bffff]
><7>node 0 link 0: mmio [80000000, fe0bffff]
><7>bus: [00,ff] on node 0 link 0
><7>bus: 00 index 0 io port: [0, ffff]
><7>bus: 00 index 1 mmio: [a0000, bffff]
><7>bus: 00 index 2 mmio: [80000000, fcffffffff]
><6>ACPI: bus type pci registered
><6>PCI: Using configuration type 1 for base access
><5>perfmon: version 2.82
><5>perfmon: CPU hotplug support enabled
><4>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><7>ACPI: EC: Look up EC in DSDT
><4>Completing Region/Field/Buffer/Package initialization:.ACPI Warning (dsobject-0501): Package List length (10A) larger than NumElements count (2), truncated
><4> [20080609]
><4>.......................................................................................................
><4>Initialized 18/22 Regions 30/30 Fields 40/40 Buffers 16/17 Packages (687 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:
><4>Executed 0 _INI methods requiring 0 _STA executions (examined 70 objects)
><4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: 0000:00:00.0 reg 10 32bit mmio: [f0000000, f7ffffff]
><7>PCI: 0000:00:01.1 reg 10 io port: [5080, 509f]
><7>PCI: 0000:00:01.1 reg 20 io port: [5000, 503f]
><7>PCI: 0000:00:01.1 reg 24 io port: [5040, 507f]
><6>pci 0000:00:01.1: PME# supported from D3hot D3cold
><6>pci 0000:00:01.1: PME# disabled
><7>PCI: 0000:00:02.0 reg 10 32bit mmio: [febfd000, febfdfff]
><7>pci 0000:00:02.0: supports D1
><7>pci 0000:00:02.0: supports D2
><6>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:02.0: PME# disabled
><7>PCI: 0000:00:02.1 reg 10 32bit mmio: [febfe000, febfefff]
><7>pci 0000:00:02.1: supports D1
><7>pci 0000:00:02.1: supports D2
><6>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:02.1: PME# disabled
><7>PCI: 0000:00:02.2 reg 10 32bit mmio: [febffc00, febffcff]
><7>pci 0000:00:02.2: supports D1
><7>pci 0000:00:02.2: supports D2
><6>pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:02.2: PME# disabled
><7>PCI: 0000:00:05.0 reg 10 32bit mmio: [febfc000, febfcfff]
><7>PCI: 0000:00:05.0 reg 14 io port: [ec00, ec07]
><7>pci 0000:00:05.0: supports D1
><7>pci 0000:00:05.0: supports D2
><6>pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:05.0: PME# disabled
><7>PCI: 0000:00:06.0 reg 10 io port: [e800, e8ff]
><7>PCI: 0000:00:06.0 reg 14 io port: [e400, e47f]
><7>PCI: 0000:00:06.0 reg 18 32bit mmio: [febfb000, febfbfff]
><7>pci 0000:00:06.0: supports D1
><7>pci 0000:00:06.0: supports D2
><7>PCI: 0000:00:08.0 reg 20 io port: [ffa0, ffaf]
><7>PCI: 0000:00:0a.0 reg 10 io port: [9f0, 9f7]
><7>PCI: 0000:00:0a.0 reg 14 io port: [bf0, bf3]
><7>PCI: 0000:00:0a.0 reg 18 io port: [970, 977]
><7>PCI: 0000:00:0a.0 reg 1c io port: [b70, b73]
><7>PCI: 0000:00:0a.0 reg 20 io port: [c800, c80f]
><7>PCI: 0000:00:0a.0 reg 24 io port: [c400, c47f]
><7>PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
><7>PCI: 0000:01:00.0 reg 14 32bit mmio: [e0000000, e7ffffff]
><7>PCI: 0000:01:00.0 reg 30 32bit mmio: [fe9e0000, fe9fffff]
><7>PCI: bridge 0000:00:0b.0 32bit mmio: [fc900000, fe9fffff]
><7>PCI: bridge 0000:00:0b.0 32bit mmio pref: [dc800000, ec7fffff]
><7>PCI: 0000:02:06.0 reg 10 32bit mmio: [feaff800, feafffff]
><7>pci 0000:02:06.0: supports D1
><7>pci 0000:02:06.0: supports D2
><7>PCI: 0000:02:07.0 reg 10 io port: [b800, b8ff]
><7>PCI: 0000:02:07.0 reg 14 32bit mmio: [feaff400, feaff4ff]
><7>PCI: 0000:02:07.0 reg 30 32bit mmio: [feae0000, feaeffff]
><7>PCI: 0000:02:0b.0 reg 10 32bit mmio: [feafd800, feafdfff]
><7>PCI: 0000:02:0b.0 reg 14 io port: [bc00, bc7f]
><7>pci 0000:02:0b.0: supports D2
><6>pci 0000:02:0b.0: PME# supported from D2 D3hot D3cold
><6>pci 0000:02:0b.0: PME# disabled
><7>PCI: bridge 0000:00:0e.0 io port: [b000, bfff]
><7>PCI: bridge 0000:00:0e.0 32bit mmio: [fea00000, feafffff]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
><6>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
><6>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *9
><6>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
><6>ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
><6>ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *10
><6>ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *11
><6>ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11
><6>ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *11
><6>ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
><6>ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
><6>ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0
><6>ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
><6>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
><6>ACPI: Power Resource [ISAV] (on)
><4>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 47, should be 17 [20080609]
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 17 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PCI: Using ACPI for IRQ routing
><6>agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
><6>agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
><6>agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xf0000000
><6>AppArmor: AppArmor Filesystem Enabled
><4>ACPI: RTC can wake from S4
><6>system 00:08: ioport range 0x190-0x193 has been reserved
><6>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
><6>system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
><6>system 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
><6>system 00:09: iomem range 0xff780000-0xff7bffff has been reserved
><6>system 00:0c: ioport range 0x480-0x487 has been reserved
><6>system 00:0c: ioport range 0xd00-0xd07 has been reserved
><6>system 00:10: iomem range 0x0-0x9ffff could not be reserved
><6>system 00:10: iomem range 0xc0000-0xdffff has been reserved
><6>system 00:10: iomem range 0xe0000-0xfffff could not be reserved
><6>system 00:10: iomem range 0x100000-0x7fffffff could not be reserved
><6>system 00:10: iomem range 0xff7c0000-0xffffffff could not be reserved
><6>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01
><6>pci 0000:00:0b.0:   IO window: disabled
><6>pci 0000:00:0b.0:   MEM window: 0xfc900000-0xfe9fffff
><6>pci 0000:00:0b.0:   PREFETCH window: 0x000000dc800000-0x000000ec7fffff
><6>pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
><6>pci 0000:00:0e.0:   IO window: 0xb000-0xbfff
><6>pci 0000:00:0e.0:   MEM window: 0xfea00000-0xfeafffff
><6>pci 0000:00:0e.0:   PREFETCH window: disabled
><7>pci 0000:00:0e.0: setting latency timer to 64
><6>bus: 00 index 0 io port: [0, ffff]
><6>bus: 00 index 1 mmio: [0, ffffffffffffffff]
><6>bus: 01 index 0 mmio: [0, 0]
><6>bus: 01 index 1 mmio: [fc900000, fe9fffff]
><6>bus: 01 index 2 mmio: [dc800000, ec7fffff]
><6>bus: 01 index 3 mmio: [0, 0]
><6>bus: 02 index 0 io port: [b000, bfff]
><6>bus: 02 index 1 mmio: [fea00000, feafffff]
><6>bus: 02 index 2 mmio: [0, 0]
><6>bus: 02 index 3 mmio: [0, 0]
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
><6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 262144 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 5532k freed
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1238617032.588:1): initialized
><6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>msgmni has been set to 1002
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>perfmon: added sampling format default
><7>pci 0000:01:00.0: Boot video device
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.103
><6>Serial: 8250/16550 driver8 ports, IRQ sharing disabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:0f: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>TCP cubic registered
><4>registered taskstats version 1
><6>Freeing unused kernel memory: 788k freed
><6>Write protecting the kernel read-only data: 4932k
><6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
><6>processor ACPI_CPU:00: registered as cooling_device0
><6>Uniform Multi-Platform E-IDE driver
><6>amd74xx 0000:00:08.0: UDMA133 controller
><6>amd74xx 0000:00:08.0: IDE controller (0x10de:0x00e5 rev 0xa2)
><6>AMD_IDE 0000:00:08.0: power state changed by ACPI to D0
><4>amd74xx 0000:00:08.0: BIOS didn't set cable bits correctly. Enabling workaround.
><6>amd74xx 0000:00:08.0: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0xffa0-0xffa7
><6>    ide1: BM-DMA at 0xffa8-0xffaf
><7>Probing IDE interface ide0...
><7>Switched to high resolution mode on CPU 0
><6>hda: Maxtor 6Y080L0, ATA DISK drive
><6>input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1
><6>hdb: SAMSUNG SP0802N, ATA DISK drive
><7>hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
><6>hda: UDMA/133 mode selected
><7>hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
><6>hdb: UDMA/100 mode selected
><7>Probing IDE interface ide1...
><6>hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
><6>hdd: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive
><7>hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
><6>hdc: UDMA/33 mode selected
><7>hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
><6>hdd: UDMA/33 mode selected
><6>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><4>isa bounce pool size: 16 pages
><6>ide1 at 0x170-0x177,0x376 on irq 15
><6>ACPI: No dock devices found.
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><7>sata_nv 0000:00:0a.0: version 3.5
><4>ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22
><4>ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
><6>sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22
><7>sata_nv 0000:00:0a.0: setting latency timer to 64
><6>scsi0 : sata_nv
><6>scsi1 : sata_nv
><6>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc800 irq 22
><6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc808 irq 22
><6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
><4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
><6>vendor=10de device=00ed
><6>advansys 0000:02:07.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19
><6>scsi2 : AdvanSys SCSI 3.4: PCI Ultra: IO 0xB800-0xB80F, IRQ 0x13
><5>scsi 2:0:3:0: Sequential-Access ARCHIVE  Python 04106-XXX 7550 PQ: 0 ANSI: 2
><6>udevd version 128 started
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><4>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
><6>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21
><7>ohci_hcd 0000:00:02.0: setting latency timer to 64
><6>ohci_hcd 0000:00:02.0: OHCI Host Controller
><6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
><6>ohci_hcd 0000:00:02.0: irq 21, io mem 0xfebfd000
><4>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
><6>hda: max request size: 128KiB
><6>hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63
><6>hda: cache flushes supported
><6> hda: hda1 hda2 hda3 hda4 < hda5 hda6<6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 4 ports detected
><4> hda7 hda8 hda9 hda10 hda11 hda12 >
><6>hdb: max request size: 512KiB
><6>hdb: Host Protected Area detected.
><6>	current capacity is 66055248 sectors (33820 MB)
><6>	native  capacity is 156368016 sectors (80060 MB)
><6>hdb: Host Protected Area disabled.
><6>hdb: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63
><6>hdb: cache flushes supported
><6> hdb: hdb1 hdb2
><6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: OHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.27.19-3.2-default ohci_hcd
><6>usb usb1: SerialNumber: 0000:00:02.0
><4>ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20
><6>ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 20 (level, low) -> IRQ 20
><7>ohci_hcd 0000:00:02.1: setting latency timer to 64
><6>ohci_hcd 0000:00:02.1: OHCI Host Controller
><6>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
><6>ohci_hcd 0000:00:02.1: irq 20, io mem 0xfebfe000
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 4 ports detected
><6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: OHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.27.19-3.2-default ohci_hcd
><6>usb usb2: SerialNumber: 0000:00:02.1
><4>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
><6>ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
><7>ehci_hcd 0000:00:02.2: setting latency timer to 64
><6>ehci_hcd 0000:00:02.2: EHCI Host Controller
><6>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
><6>ehci_hcd 0000:00:02.2: debug port 1
><7>ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
><6>ehci_hcd 0000:00:02.2: irq 22, io mem 0xfebffc00
><6>usb 1-3: new full speed USB device using ohci_hcd and address 2
><6>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 8 ports detected
><3>hub 1-0:1.0: unable to enumerate USB device on port 3
><6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: EHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.27.19-3.2-default ehci_hcd
><6>usb usb3: SerialNumber: 0000:00:02.2
><6>ata1: EH complete
><6>ata2: EH complete
><6>usb 3-5: new high speed USB device using ehci_hcd and address 2
><6>usb 3-5: configuration #1 chosen from 1 choice
><6>usb 3-5: New USB device found, idVendor=eb1a, idProduct=2881
><6>usb 3-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
><6>usb 3-5: Product: USB 2881 Video
><6>ata2: EH complete
><6>ata1: EH complete
><5>REISERFS (device hda11): found reiserfs format "3.6" with standard journal
><5>REISERFS (device hda11): using ordered data mode
><4>reiserfs: using flush barriers
><5>REISERFS (device hda11): journal params: device hda11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device hda11): checking transaction log (hda11)
><5>REISERFS (device hda11): Using r5 hash to sort names
><6>udevd version 128 started
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
><6>Linux video capture interface: v2.00
><6>gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 893kHz
><6>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
><6>rtc0: alarms up to one year, y3k
><6>input: PC Speaker as /devices/platform/pcspkr/input/input2
><6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
><6>ACPI: Power Button (FF) [PWRF]
><6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
><4>ACPI: I/O resource nForce2_smbus [0x5000-0x503f] conflicts with ACPI region SMRG [0x5000-0x5004]
><6>ACPI: Device needs an ACPI driver
><6>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
><6>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
><6>ACPI: Power Button (CM) [PWRB]
><6>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
><4>ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
><6>forcedeth 0000:00:05.0: PCI INT A -> Link[LKLN] -> GSI 21 (level, low) -> IRQ 21
><7>forcedeth 0000:00:05.0: setting latency timer to 64
><7>nv_probe: set workaround bit for reversed mac addr
><6>hdc: ATAPI 52X DVD-ROM drive, 256kB Cache
><6>Uniform CD-ROM driver Revision: 3.20
><6>IT8712 SuperIO detected.
><6>parport_pc 00:06: reported by Plug and Play ACPI
><6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
><6>hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
><6>forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:11:d8:74:e0:24
><6>forcedeth 0000:00:05.0: csum timirq gbit lnktim desc-v2
><4>nvidia: module license 'NVIDIA' taints kernel.
><4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 18
><6>nvidia 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 18 (level, low) -> IRQ 18
><4>NVRM: loading NVIDIA Linux x86_64 Kernel Module  96.43.10  Sat Jan 24 19:27:35 PST 2009
><6>ppdev: user-space parallel port driver
><6>st: Version 20080504, fixed bufsize 32768, s/g segs 256
><5>st 2:0:3:0: Attached scsi tape st0
><6>st 2:0:3:0: st0: try direct i/o: yes (alignment 4 B)
><6>em28xx v4l2 driver version 0.0.1 loaded
><6>em28xx: new video device (eb1a:2881): interface 0, class 255
><6>em28xx: device is attached to a USB 2.0 bus
><6>em28xx #0: Alternate settings: 8
><6>em28xx #0: Alternate setting 0, max size= 0
><6>em28xx #0: Alternate setting 1, max size= 0
><6>em28xx #0: Alternate setting 2, max size= 1448
><6>em28xx #0: Alternate setting 3, max size= 2048
><6>em28xx #0: Alternate setting 4, max size= 2304
><6>em28xx #0: Alternate setting 5, max size= 2580
><6>em28xx #0: Alternate setting 6, max size= 2892
><6>em28xx #0: Alternate setting 7, max size= 3072
><6>vendor=10de device=00ed
><6>ohci1394 0000:02:0b.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19
><6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[feafd800-feafdfff]  Max Packet=[2048]  IR/IT contexts=[4/8]
><6>osst :I: Tape driver with OnStream support version 0.99.4
><6>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
><5>st 2:0:3:0: Attached scsi generic sg0 type 1
><3>attach_inform: tvp5150 detected.
><6>tvp5150 2-005c: tvp5150am1 detected.
><6>saa7130/34: v4l2 driver version 0.2.14 loaded
><4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17
><6>vendor=10de device=00ed
><6>saa7134 0000:02:06.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17
><6>saa7133[0]: found at 0000:02:06.0, rev: 208, irq: 17, latency: 64, mmio: 0xfeaff800
><6>saa7133[0]: subsystem: 17de:7136, board: V-Stream Studio TV Terminator [card=65,insmod option]
><6>saa7133[0]: board init: gpio is 40
><6>input: saa7134 IR (V-Stream Studio TV  as /devices/pci0000:00/0000:00:0e.0/0000:02:06.0/input/input5
><4>ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
><6>Intel ICH 0000:00:06.0: PCI INT A -> Link[LAUI] -> GSI 20 (level, low) -> IRQ 20
><7>Intel ICH 0000:00:06.0: setting latency timer to 64
><6>saa7133[0]: i2c eeprom 00: de 17 36 71 10 28 ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>intel8x0_measure_ac97_clock: measured 234091 usecs
><6>intel8x0: clocking to 48000
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d800000b4f65]
><3>ata1: EH pending after 5 tries, giving up
><6>ata1: EH complete
><3>ata2: EH pending after 5 tries, giving up
><6>ata2: EH complete
><7>saa7133[0]/ir: build_key gpio=0x40 mask=0x1f data=0
><6>successfully attached tuner
><6>tuner' 2-0061: chip found @ 0xc2 (em28xx #0)
><6>em28xx-i2c: using internal tuner, denying request to i2c tuner module.
><6>em28xx #0: V4L2 VBI device registered as /dev/vbi1
><6>em28xx #0: V4L2 device registered as /dev/video1
><6>input: em2880/em2870 remote control as /devices/virtual/input/input6
><6>tuner' 3-004b: chip found @ 0x96 (saa7133[0])
><6>em28xx-input.c: remote control handler attached
><6>em28xx #0: Found Pinnacle Hybrid Pro
><6>audio device (eb1a:2881): interface 1, class 1
><6>usbcore: registered new interface driver em28xx
><6>usbcore: registered new interface driver snd-usb-audio
><6>tda829x 3-004b: setting tuner address to 61
><6>em2880-dvb.c: DVB Init
><6>DVB: registering new adapter (em2880 DVB-T)
><4>DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
><6>Em28xx: Initialized (Em2880 DVB Extension) extension
><6>tda829x 3-004b: type set to tda8290+75a
><3>ata1: EH pending after 5 tries, giving up
><6>ata1: EH complete
><3>ata2: EH pending after 5 tries, giving up
><6>ata2: EH complete
><3>ata2: EH pending after 5 tries, giving up
><6>ata2: EH complete
><3>ata1: EH pending after 5 tries, giving up
><6>ata1: EH complete
><3>ata1: EH pending after 5 tries, giving up
><6>ata1: EH complete
><3>ata2: EH pending after 5 tries, giving up
><6>ata2: EH complete
><6>saa7133[0]: registered device video0 [v4l2]
><6>saa7133[0]: registered device vbi0
><6>saa7133[0]: registered device radio0
><6>saa7134 ALSA driver for DMA sound loaded
><6>saa7133[0]/alsa: saa7133[0] at 0xfeaff800 irq 17 registered as card 2
><6>Adding 987956k swap on /dev/hda6.  Priority:-1 extents:1 across:987956k
><6>device-mapper: uevent: version 1.0.3
><6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
><3>ata2: EH pending after 5 tries, giving up
><6>ata2: EH complete
><3>ata1: EH pending after 5 tries, giving up
><6>ata1: EH complete
><3>ata1: EH pending after 5 tries, giving up
><6>ata1: EH complete
><3>ata2: EH pending after 5 tries, giving up
><6>ata2: EH complete
><6>loop: module loaded
><6>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><5>XFS mounting filesystem hda12
><7>Ending clean XFS mount for filesystem: hda12
><5>REISERFS (device hda8): found reiserfs format "3.6" with standard journal
><5>REISERFS (device hda8): using ordered data mode
><4>reiserfs: using flush barriers
><5>REISERFS (device hda8): journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device hda8): checking transaction log (hda8)
><5>REISERFS (device hda8): Using r5 hash to sort names
><5>REISERFS (device hda7): found reiserfs format "3.6" with standard journal
><5>REISERFS (device hda7): using ordered data mode
><4>reiserfs: using flush barriers
><5>REISERFS (device hda7): journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device hda7): checking transaction log (hda7)
><5>REISERFS (device hda7): Using r5 hash to sort names
><3>ata1: EH pending after 5 tries, giving up
><6>ata1: EH complete
><3>ata2: EH pending after 5 tries, giving up
><6>ata2: EH complete
><4>fuse init (API version 7.9)
><5>XFS mounting filesystem dm-0
><7>Ending clean XFS mount for filesystem: dm-0
><5>REISERFS (device dm-1): found reiserfs format "3.6" with standard journal
><5>REISERFS (device dm-1): using ordered data mode
><4>reiserfs: using flush barriers
><5>REISERFS (device dm-1): journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device dm-1): checking transaction log (dm-1)
><5>REISERFS (device dm-1): Using r5 hash to sort names
><3>ata2: EH pending after 5 tries, giving up
><6>ata2: EH complete
><3>ata1: EH pending after 5 tries, giving up
><6>ata1: EH complete
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Wed Apr  1 20:17:22 2009
>
>resume device  not found (ignoring)
>Waiting for device /dev/hda11 to appear:  ok
>fsck 1.41.1 (01-Sep-2008)
>[/sbin/fsck.reiserfs (1) -- /] fsck.reiserfs -a /dev/hda11 
>Reiserfs super block in block 16 on 0x30b of format 3.6 with standard journal
>Blocks (total/free): 2560336/378593 by 4096 bytes
>Filesystem is clean
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/hda11
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Apr  1 22:17:24 2009
>
>done
>Starting udevd: done
>Loading drivers, configuring devices: done
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>doneStarting MD Raid unused
>Activating device mapper...
>done
>Waiting for udev to settle...
>Scanning for LVM volume groups...
>  Reading all physical volumes.  This may take a while...
>  Found volume group "dati" using metadata type lvm2
>Activating LVM volume groups...
>  2 logical volume(s) in volume group "dati" now active
>done
>Waiting for /dev/disk/by-label/bacula_backup_1
>/dev/disk/by-label/bacula_2 . no more events
>Checking file systems...
>fsck 1.41.1 (01-Sep-2008)
>/sbin/fsck.xfs: XFS file system.
>Reiserfs super block in block 16 on 0x308 of format 3.6 with standard journal
>Blocks (total/free): 2560336/340968 by 4096 bytes
>Filesystem is clean
>Reiserfs super block in block 16 on 0x307 of format 3.6 with standard journal
>Blocks (total/free): 2443872/599891 by 4096 bytes
>Filesystem is clean
>donedone
>Mounting local file systems...
>/proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>mount: you didn't specify a filesystem type for /dev/hda12
>       I will try type xfs
>/dev/hda12 on /home type xfs (rw)
>/dev/hda8 on /data1 type reiserfs (rw)
>mount: you didn't specify a filesystem type for /dev/hda7
>       I will try type reiserfs
>/dev/hda7 on /suse10.2 type reiserfs (rw)
>/dev/hda1 on /windows/C type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
>/dev/hda2 on /windows/D type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
>/dev/hda3 on /windows/E type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
>/dev/hda9 on /windows/G type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
>/dev/hda10 on /windows/H type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
>mount: you didn't specify a filesystem type for /dev/mapper/dati-multimedia
>       I will try type xfs
>/dev/mapper/dati-multimedia on /mnt/hdb1 type xfs (rw,noexec,nosuid,nodev)
>mount: you didn't specify a filesystem type for /dev/mapper/dati-distribuzione
>       I will try type reiserfs
>/dev/mapper/dati-distribuzione on /mnt/hdb2 type reiserfs (rw,noexec,nosuid,nodev)
>mount: mount point /mnt/backup does not exist
>mount: mount point /mnt/backup does not exist
>failedFuse filesystem already availabledone
>Mounting fuse control filesystemdone
><notice>killproc: kill(613,29)
>Creating /var/log/boot.msg
>doneActivating remaining swap-devices in /etc/fstab...
>doneATTENTION: You have modified /etc/resolv.conf.  Leaving it untouched...
>You can find my version in /etc/resolv.conf.netconfig ...
>Mounting securityfs on /sys/kernel/security done
>Loading AppArmor profiles done
>Setting up hostname 'casaregno'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>              IP address: 127.0.0.2/8   
>done
>Configuring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
>Configured serial ports
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>net.ipv4.conf.default.promote_secondaries = 1
>net.ipv4.conf.all.promote_secondaries = 1
>kernel.sysrq = 1
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>System Boot Control: The system has been set up
>Skipped features: boot.md boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(613,3)
>
>INIT: 
>Boot logging started on /dev/tty1(/dev/console) at Wed Apr  1 22:17:47 2009
>
>Entering runlevel: 5
>
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/sbin/klogd ]
>done
>Starting D-Bus daemondone
>Starting acpid <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/sbin/acpid ]
>done
>Loading CPUFreq modulesdone
>Starting HAL daemonInitializing random number generatordone
>Starting Firewall Initialization (phase 1 of 2) done
>Starting spindownd daemon...  spindownddone.
>Setting up (localfs) network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>              IP address: 127.0.0.2/8   
>done    eth0      device: nVidia Corporation CK8S Ethernet Controller (rev a2)
>    eth0      IP address: 192.168.100.150/24   
>doneSetting up service (localfs) network  .  .  .  .  .  .  .  .  .  .done
>done
>Not starting NFS client services - no NFS found in /etc/fstab:unused
>Mount CIFS File Systems unused
>Starting service kdm<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 SPLASHCFG= PWD=/ LANG=it_IT.UTF-8 PREVLEVEL=N LINES=25 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER= SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/usr/bin/kdm ]
>done
>Loading console font lat9w-16.psfu  -m trivial G0:loadable
>setfont: putfont: 256,8x16:  failed: -1
>putfont: KDFONTOP: Invalid argument
>setfont: putfont: 256,8x16:  failed: -1
>putfont: KDFONTOP: Invalid argument
>setfont: putfont: 256,8x16:  failed: -1
>putfont: KDFONTOP: Invalid argument
>setfont: putfont: 256,8x16:  failed: -1
>putfont: KDFONTOP: Invalid argument
>setfont: putfont: 256,8x16:  failed: -1
>putfont: KDFONTOP: Invalid argument
>setfont: putfont: 256,8x16:  failed: -1
>putfont: KDFONTOP: Invalid argument
>failedLoading keymap i386/qwerty/it.map.gz
>doneLoading compose table latin1.adddone
>Start Unicode mode
>done<notice>checkproc: /usr/bin/kdm 2853
><notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/sbin/auditd ]
><notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
>Starting service at daemondone
>Starting auditd done
><notice>startproc: execve (/usr/sbin/bacula-fd) [ /usr/sbin/bacula-fd -c /etc/bacula/bacula-fd.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/usr/sbin/bacula-fd ]
>Starting the Bacula File daemondone
>Starting Avahi daemon done
>Starting Avahi DNS Configuration daemon done
>Starting the Bacula Storage daemon<notice>startproc: execve (/usr/sbin/bacula-sd) [ /usr/sbin/bacula-sd -c /etc/bacula/bacula-sd.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/usr/sbin/bacula-sd ]
>done
>Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
>done
>Starting irqbalance unused
>Starting java.binfmt_misc done
>Starting service MySQL <notice>checkproc: /usr/bin/kdm 2853
>done
>Starting the Bacula Director daemon<notice>startproc: execve (/usr/sbin/bacula-dir) [ /usr/sbin/bacula-dir -c /etc/bacula/bacula-dir.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/usr/sbin/bacula-dir ]
>done
>Setting up (remotefs) network interfaces:
>Setting up service (remotefs) network  .  .  .  .  .  .  .  .  .  .done
>Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>done
>Starting network time protocol daemon (NTPD)<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -g -u ntp:ntp -i /var/lib/ntp -c /etc/ntp.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
>done
>No active profileunused
>Starting mail service (Postfix)done
>Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>done
>Starting smartd done
>Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda11 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>done
>Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
>done
>done
>Master Resource Control: runlevel 5 has been reached
>Failed services in runlevel 5: kbd
>Skipped services in runlevel 5: nfs smbfs irq_balancer splash
><notice>killproc: kill(2102,3)
>
>Boot logging started on /dev/tty1(/dev/console) at Wed Apr  1 21:21:32 2009
>
>Master Resource Control: previous runlevel: 5, switching to runlevel: 0
>Shutting down CRON daemon<notice>killproc: kill(3660,15)
>done
>Shutting down smartd <notice>killproc: kill(3677,15)
>done
>Shutting down mail service (Postfix)<notice>killproc: kill(3637,15)
>done
><notice>Shutting down service kdmkillproc: kill(2853,15)
>done
>Shutting down Avahi DNS Configuration daemon done
>Shutting down the Bacula Director daemon<notice>killproc: kill(3417,15)
>done
>Shutting down cupsd<notice>killproc: kill(3243,15)
>done
>Shutting down network time protocol daemon (NTPD)<notice>killproc: kill(3578,15)
>done
>Shutting down the Firewall skipped
>Shutting down sound driverERROR: Module snd_pcm is in use by saa7134_alsa,em28xx_audio
>ERROR: Module snd_timer is in use by snd_pcm
>ERROR: Module snd is in use by saa7134_alsa,em28xx_audio,snd_pcm,snd_timer
>ERROR: Module snd_page_alloc is in use by snd_pcm
>failed
>Shutting down service at daemon<notice>killproc: kill(3130,15)
>done
>Shutting down auditd <notice>killproc: kill(3141,15)
>done
>Shutting down Avahi daemon done
>Shutting down the Bacula File daemon<notice>killproc: kill(3191,15)
>done
>Shutting down the Bacula Storage daemon<notice>killproc: kill(3209,15)
>Shutting down irqbalance done
>Shutting down java.binfmt_misc done
>Shutting down service kdmdone
>Shutting down (remotefs) network interfaces:
><notice>killproc: kill(3764,15)
>Shutting down SSH daemondone
><notice>killproc: kill(2146,15)
>Shutting down acpid done
><notice>killproc: kill(2170,15)
><notice>killproc: kill(3561,15)
>Shutting down HAL daemondone
>Shutting down Name Service Cache Daemondone
>No active profileunused
>Saving random seeddone
>Stopping spindownd daemon...  spindownddone.
>done
>Shutting down service MySQL done
><notice>killproc: kill(3209,9)
>failed
>Umount SMB/ CIFS File Systems done
>Shutting down syslog services<notice>killproc: kill(2125,15)
><notice>killproc: kill(2127,15)
>done
>Shutting down NFS client services: idmapddone
>Shutting down (localfs) network interfaces:
>    eth0      device: nVidia Corporation CK8S Ethernet Controller (rev a2)
>doneShutting down service (localfs) network  .  .  .  .  .  .  .  .  .done
>Shutting down D-Bus daemon<notice>killproc: kill(2136,15)
>done
><notice>killproc: kill(4915,3)

Actions: View

Attachments on bug 466484: 265643 | 265645 | 265689 | 265691 | 265705 | 265992 | 266171 | 266172 | 266173 | 266174 | 267063 | 267289 | 267291 | 267579 | 267581 | 269096 | 274659 | 274963 | 278280 | 278281 | 278282 | 278284 | 278423 | 278425 | 283526 | 283527 | 283820 | 283822 | 283824 | 284364 | 284365 | 284642 | 285112 | 285113