Attachment 350808 Details for Bug 582982

Xorg.0.log - OpenSUSE 11.3 Milestone4

HP-TC1100-Xorg.0.log (text/plain), 32.57 KB, created by Vadim Plessky on 2010-03-26 11:54:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Vadim Plessky

Created: 2010-03-26 11:54:12 UTC

Size: 32.57 KB

patch

obsolete

>
>X.Org X Server 1.7.6
>Release Date: 2010-03-17
>X Protocol Version 11, Revision 0
>Build Operating System: openSUSE SUSE LINUX
>Current Operating System: Linux linux.site 2.6.33-6-default #1 SMP 2010-02-25 20:06:12 +0100 i686
>Kernel command line: BOOT_IMAGE=linux initrd=initrd,10240768.spl ramdisk_size=512000 ramdisk_blocksize=4096 splash=silent quiet preloadlog=/dev/null vga=0x317 ipv6.disable=1
>Build Date: 20 March 2010  07:30:57PM
> 
>Current version of pixman: 0.17.10
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 26 11:51:35 2010
>(II) Loader magic: 0x82255c0
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.4
>	X.Org Video Driver: 6.0
>	X.Org XInput driver : 7.0
>	X.Org Server Extension : 2.0
>(++) using VT number 7
>
>(--) PCI:*(0:1:0:0) 10de:0176:103c:08b0 rev 163, Mem @ 0xd8000000/16777216, 0xf0000000/67108864, 0xe8000000/524288, BIOS @ 0x????????/131072
>(==) Using default built-in configuration (48 lines)
>(==) --- Start of built-in configuration ---
>	Section "Device"
>		Identifier	"Builtin Default nvidia Device 0"
>		Driver	"nvidia"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default nvidia Screen 0"
>		Device	"Builtin Default nvidia Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default nouveau Device 0"
>		Driver	"nouveau"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default nouveau Screen 0"
>		Device	"Builtin Default nouveau Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default nv Device 0"
>		Driver	"nv"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default nv Screen 0"
>		Device	"Builtin Default nv Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default fbdev Device 0"
>		Driver	"fbdev"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default fbdev Screen 0"
>		Device	"Builtin Default fbdev Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default vesa Device 0"
>		Driver	"vesa"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default vesa Screen 0"
>		Device	"Builtin Default vesa Device 0"
>	EndSection
>	Section "ServerLayout"
>		Identifier	"Builtin Default Layout"
>		Screen	"Builtin Default nvidia Screen 0"
>		Screen	"Builtin Default nouveau Screen 0"
>		Screen	"Builtin Default nv Screen 0"
>		Screen	"Builtin Default fbdev Screen 0"
>		Screen	"Builtin Default vesa Screen 0"
>	EndSection
>(==) --- End of built-in configuration ---
>(==) ServerLayout "Builtin Default Layout"
>(**) |-->Screen "Builtin Default nvidia Screen 0" (0)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default nvidia Device 0"
>(==) No monitor specified for screen "Builtin Default nvidia Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default nouveau Screen 0" (1)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default nouveau Device 0"
>(==) No monitor specified for screen "Builtin Default nouveau Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default nv Screen 0" (2)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default nv Device 0"
>(==) No monitor specified for screen "Builtin Default nv Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default fbdev Screen 0" (3)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default fbdev Device 0"
>(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default vesa Screen 0" (4)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default vesa Device 0"
>(==) No monitor specified for screen "Builtin Default vesa Screen 0".
>	Using a default monitor configuration.
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(WW) The directory "/usr/share/fonts/TTF/" does not exist.
>	Entry deleted from font path.
>(WW) The directory "/usr/share/fonts/OTF" does not exist.
>	Entry deleted from font path.
>(WW) The directory "/usr/share/fonts/Type1/" does not exist.
>	Entry deleted from font path.
>(WW) The directory "/usr/share/fonts/100dpi" does not exist.
>	Entry deleted from font path.
>(WW) The directory "/usr/share/fonts/cyrillic" does not exist.
>	Entry deleted from font path.
>(==) FontPath set to:
>	/usr/share/fonts/misc:unscaled,
>	/usr/share/fonts/75dpi:unscaled,
>	/usr/share/fonts/URW
>(==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
>(II) Cannot locate a core pointer device.
>(II) Cannot locate a core keyboard device.
>(II) The server relies on HAL to provide the list of input devices.
>	If no devices become available, reconfigure HAL or disable AutoAddDevices.
>(II) Open ACPI successful (/var/run/acpid.socket)
>(II) LoadModule: "extmod"
>(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(==) AIGLX enabled
>(II) Loading extension GLX
>(II) LoadModule: "record"
>(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
>(II) Module record: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 1.13.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension RECORD
>(II) LoadModule: "dri"
>(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "dri2"
>(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
>(II) Module dri2: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 1.1.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DRI2
>(II) LoadModule: "nvidia"
>(WW) Warning, couldn't open module nvidia
>(II) UnloadModule: "nvidia"
>(EE) Failed to load module "nvidia" (module does not exist, 0)
>(II) LoadModule: "nouveau"
>(WW) Warning, couldn't open module nouveau
>(II) UnloadModule: "nouveau"
>(EE) Failed to load module "nouveau" (module does not exist, 0)
>(II) LoadModule: "nv"
>(II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
>(II) Module nv: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 2.1.17
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 6.0
>(II) LoadModule: "fbdev"
>(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
>(II) Module fbdev: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 0.4.1
>	ABI class: X.Org Video Driver, version 6.0
>(II) LoadModule: "vesa"
>(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
>(II) Module vesa: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 2.2.1
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 6.0
>(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
>	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
>	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
>	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
>	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
>	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
>	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
>	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
>	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
>	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
>	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
>	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
>	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
>	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
>	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
>	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
>	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
>	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
>	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
>	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
>	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
>	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
>	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
>	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
>	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
>	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
>	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
>	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
>	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
>	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
>	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
>	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
>	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
>	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
>	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
>	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
>	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
>	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
>	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
>	GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
>	Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
>	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
>	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
>	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
>	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
>	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
>	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
>	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
>	GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
>	GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
>	Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
>	GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
>	GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
>	GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
>	GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
>	GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
>	GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
>	GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
>	Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
>	GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
>	Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
>	GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
>	GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
>	GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
>	GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
>	GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
>	Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
>	GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
>	GeForce 8600M GT, GeForce 9650M GS, GeForce 8700M GT, Quadro FX 370,
>	Quadro NVS 320M, Quadro FX 570M, Quadro FX 1600M, Quadro FX 570,
>	Quadro FX 1700, GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS,
>	GeForce 8300 GS, GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
>	GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
>	Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
>	Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
>	GeForce GTX 285, GeForce GTX 275, GeForce GTX 295, Quadro CX,
>	Quadro FX 5800, Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
>	GeForce 9800 GT, GeForce 8800 GT, GeForce 9800 GX2, GeForce 9800 GT,
>	GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
>	GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
>	GeForce 8800M GTX, GeForce 8800 GS, GeForce 9600 GSO,
>	GeForce 8800 GT, GeForce 9800 GTX, GeForce 9800 GTX+,
>	GeForce 9800 GT, GeForce GTS 250, GeForce 9800M GTX,
>	GeForce GTX 260M, Quadro FX 3700, Quadro FX 3600M, Quadro FX 2800M,
>	Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
>	GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
>	GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
>	GeForce 9800M GTS, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
>	GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce GT 120,
>	GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
>	GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce GT 130M,
>	GeForce 9500 GT, Quadro FX 380, Quadro FX 580, Quadro FX 1700M,
>	Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400 GS,
>	GeForce 9300M GS, GeForce G100, GeForce 9200M GS, GeForce 9300M GS,
>	Quadro NVS 150M, Quadro NVS 160M, GeForce G 105M, GeForce G 103M,
>	Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro NVS 295,
>	GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
>	nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
>	GeForce 9100M G, GeForce 8200M G, GeForce 9400, GeForce 9400M G,
>	GeForce 9400M, GeForce 9300 / nForce 730i, GeForce G102M,
>	GeForce G102M, GeForce 9400, ION, ION LE, GeForce GT 220,
>	GeForce 210, GeForce GT 230M, GeForce GT 240M, GeForce G210,
>	GeForce 205, GeForce 310, GeForce 210, GeForce 310, GeForce G210M,
>	Quadro FX 380 LP, GeForce GT 240, GeForce GTS 260M, GeForce GTS 250M
>(II) FBDEV: driver for framebuffer: fbdev
>(II) VESA: driver for VESA chipsets: vesa
>(II) Primary Device is: PCI 01@00:00:0
>(--) NV: Found NVIDIA GeForce4 420 Go 32M at 01@00:00:0
>(WW) Falling back to old probe method for fbdev
>(II) Loading sub module "fbdevhw"
>(II) LoadModule: "fbdevhw"
>(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
>(II) Module fbdevhw: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 0.0.2
>	ABI class: X.Org Video Driver, version 6.0
>(WW) Falling back to old probe method for vesa
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>(II) Loading /usr/lib/xorg/modules/libint10.so
>(II) Module int10: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 6.0
>(II) NV(0): Initializing int10
>(II) NV(0): Primary V_BIOS segment is: 0xc000
>(--) NV(0): Chipset: "GeForce4 420 Go 32M"
>(II) NV(0): Creating default Display subsection in Screen section
>	"Builtin Default nv Screen 0" for depth/fbbpp 24/32
>(==) NV(0): Depth 24, (--) framebuffer bpp 32
>(==) NV(0): RGB weight 888
>(==) NV(0): Default visual is TrueColor
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/lib/xorg/modules/libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 6.0
>(==) NV(0): Using HW cursor
>(--) NV(0): Linear framebuffer at 0xF0000000
>(--) NV(0): MMIO registers at 0xD8000000
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Module "i2c" already built-in
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Module "ddc" already built-in
>(II) NV(0): I2C bus "DDC" initialized.
>(II) NV(0): Probing for analog device on output A...
>(--) NV(0):   ...can't find one
>(II) NV(0): Probing for analog device on output B...
>(--) NV(0):   ...can't find one
>(II) NV(0): Probing for EDID on I2C bus A...
>(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
>(II) NV(0):   ... none found
>(II) NV(0): Probing for EDID on I2C bus B...
>(II) NV(0):   ... none found
>(--) NV(0): CRTC 1 is currently programmed for DFP
>(II) NV(0): Using DFP on CRTC 1
>(--) NV(0): Panel size is 1024 x 768
>(II) NV(0): NOTE: This driver cannot reconfigure the BIOS-programmed size.
>(II) NV(0): These dimensions will be used as the panel size for mode validation.
>(II) NV(0): Panel is TMDS
>(--) NV(0): VideoRAM: 32768 kBytes
>(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
>(II) NV(0): <default monitor>: Using hsync range of 0.00-47.30 kHz
>(II) NV(0): <default monitor>: Using vrefresh range of 0.00-59.87 Hz
>(II) NV(0): Estimated virtual size for aspect ratio 1.3333 is 1024x768
>(II) NV(0): Clock range:  12.00 to 350.00 MHz
>(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
>(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
>(II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
>(II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
>(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
>(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
>(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x600" (hsync out of range)
>(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
>(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x600" (hsync out of range)
>(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (hsync out of range)
>(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (hsync out of range)
>(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (hsync out of range)
>(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (hsync out of range)
>(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1152x864" (width too large for virtual size)
>(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x960" (width too large for virtual size)
>(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x960" (width too large for virtual size)
>(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
>(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
>(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
>(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
>(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
>(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
>(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
>(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
>(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
>(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "832x624" (hsync out of range)
>(II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
>(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
>(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
>(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
>(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
>(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
>(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(--) NV(0): Virtual size is 1024x768 (pitch 1024)
>(**) NV(0): *Driver mode "1024x768": 56.0 MHz, 47.3 kHz, 59.9 Hz
>(II) NV(0): Modeline "1024x768"x59.9   56.00  1024 1072 1104 1184  768 771 775 790 +hsync -vsync (47.3 kHz)
>(**) NV(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
>(II) NV(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(**) NV(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
>(II) NV(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>(**) NV(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
>(II) NV(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(==) NV(0): DPI set to (96, 96)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/lib/xorg/modules/libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.4
>(II) Loading sub module "xaa"
>(II) LoadModule: "xaa"
>(II) Loading /usr/lib/xorg/modules/libxaa.so
>(II) Module xaa: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 1.2.1
>	ABI class: X.Org Video Driver, version 6.0
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>(II) UnloadModule: "fbdev"
>(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
>(II) UnloadModule: "fbdevhw"
>(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
>(II) UnloadModule: "vesa"
>(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
>(--) Depth 24 pixmap format is 32 bpp
>(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
>	Screen to screen bit blits
>	Solid filled rectangles
>	8x8 mono pattern filled rectangles
>	Indirect CPU to Screen color expansion
>	Solid Lines
>	Scanline Image Writes
>	Setting up tile and stipple cache:
>		32 128x128 slots
>		32 256x256 slots
>		16 512x512 slots
>(==) NV(0): Backing store disabled
>(==) NV(0): Silken mouse enabled
>(==) NV(0): DPMS enabled
>(==) RandR enabled
>(II) Initializing built-in extension Generic Event Extension
>(II) Initializing built-in extension SHAPE
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension BIG-REQUESTS
>(II) Initializing built-in extension SYNC
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XC-MISC
>(II) Initializing built-in extension SECURITY
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) AIGLX: Screen 0 is not DRI2 capable
>(II) AIGLX: Screen 0 is not DRI capable
>(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
>(II) GLX: Initialized DRISWRAST GL provider for screen 0
>(II) XKB: generating xkmfile /var/lib/xkb/compiled/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
>(EE) config/hal: couldn't initialise context: unknown error (null)
>(II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer
>(II) LoadModule: "wacom"
>(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
>(II) Module wacom: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 0.10.4
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 7.0
>(**) Option "Device" "/dev/ttyS4"
>(II) Wacom Serial Tablet PC Pen Tablet/Digitizer: type not specified, assuming 'stylus'.
>(II) Wacom Serial Tablet PC Pen Tablet/Digitizer: other types will be automatically added.
>(**) Wacom Serial Tablet PC Pen Tablet/Digitizer: always reports core events
>(II) Wacom Serial Tablet PC Pen Tablet/Digitizer: hotplugging dependent devices.
>(**) Option "Device" "/dev/ttyS4"
>(**) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: always reports core events
>(II) XINPUT: Adding extended input device "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser" (type: ERASER)
>(**) Option "StopBits" "1"
>(**) Option "DataBits" "8"
>(**) Option "Parity" "None"
>(**) Option "Vmin" "1"
>(**) Option "Vtime" "10"
>(**) Option "FlowControl" "Xoff"
>(WW) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: ISDV4 control data (0) error in % query
>(--) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: using pressure threshold of 15 for button 1
>(--) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: Wacom General ISDV4 tablet speed=38400 maxX=21240 maxY=15980 maxZ=255 resX=2540 resY=2540  tilt=disabled
>(--) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: top X=0 top Y=0 bottom X=21240 bottom Y=15980 resol X=2540 resol Y=2540
>(II) Wacom Serial Tablet PC Pen Tablet/Digitizer: hotplugging completed.
>(II) XINPUT: Adding extended input device "Wacom Serial Tablet PC Pen Tablet/Digitizer" (type: STYLUS)
>(--) Wacom Serial Tablet PC Pen Tablet/Digitizer: top X=0 top Y=0 bottom X=21240 bottom Y=15980 resol X=2540 resol Y=2540
>(II) config/hal: Adding input device AT Translated Set 2 keyboard
>(II) LoadModule: "evdev"
>(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
>	compiled for 1.7.6, module version = 2.3.2
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 7.0
>(**) AT Translated Set 2 keyboard: always reports core events
>(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
>(II) AT Translated Set 2 keyboard: Found keys
>(II) AT Translated Set 2 keyboard: Configuring as keyboard
>(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) XKB: generating xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm
>(II) config/hal: Adding input device Jing-Mold USB K/B+Mouse
>(**) Jing-Mold USB K/B+Mouse: always reports core events
>(**) Jing-Mold USB K/B+Mouse: Device: "/dev/input/event3"
>(II) Jing-Mold USB K/B+Mouse: Found 10 mouse buttons
>(II) Jing-Mold USB K/B+Mouse: Found relative axes
>(II) Jing-Mold USB K/B+Mouse: Found x and y relative axes
>(II) Jing-Mold USB K/B+Mouse: Found keys
>(II) Jing-Mold USB K/B+Mouse: Configuring as mouse
>(II) Jing-Mold USB K/B+Mouse: Configuring as keyboard
>(**) Jing-Mold USB K/B+Mouse: YAxisMapping: buttons 4 and 5
>(**) Jing-Mold USB K/B+Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Jing-Mold USB K/B+Mouse" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(**) Jing-Mold USB K/B+Mouse: (accel) keeping acceleration scheme 1
>(**) Jing-Mold USB K/B+Mouse: (accel) acceleration profile 0
>(II) Jing-Mold USB K/B+Mouse: initialized for relative axes.
>(II) config/hal: Adding input device Jing-Mold USB K/B+Mouse
>(**) Jing-Mold USB K/B+Mouse: always reports core events
>(**) Jing-Mold USB K/B+Mouse: Device: "/dev/input/event2"
>(II) Jing-Mold USB K/B+Mouse: Found keys
>(II) Jing-Mold USB K/B+Mouse: Configuring as keyboard
>(II) XINPUT: Adding extended input device "Jing-Mold USB K/B+Mouse" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) config/hal: Adding input device Acrox USB & PS/2 Mouse
>(**) Acrox USB & PS/2 Mouse: always reports core events
>(**) Acrox USB & PS/2 Mouse: Device: "/dev/input/event1"
>(II) Acrox USB & PS/2 Mouse: Found 9 mouse buttons
>(II) Acrox USB & PS/2 Mouse: Found scroll wheel(s)
>(II) Acrox USB & PS/2 Mouse: Found relative axes
>(II) Acrox USB & PS/2 Mouse: Found x and y relative axes
>(II) Acrox USB & PS/2 Mouse: Configuring as mouse
>(**) Acrox USB & PS/2 Mouse: YAxisMapping: buttons 4 and 5
>(**) Acrox USB & PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Acrox USB & PS/2 Mouse" (type: MOUSE)
>(**) Acrox USB & PS/2 Mouse: (accel) keeping acceleration scheme 1
>(**) Acrox USB & PS/2 Mouse: (accel) acceleration profile 0
>(II) Acrox USB & PS/2 Mouse: initialized for relative axes.
>(II) config/hal: Adding input device Power Button
>(**) Power Button: always reports core events
>(**) Power Button: Device: "/dev/input/event4"
>(II) Power Button: Found keys
>(II) Power Button: Configuring as keyboard
>(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) config/hal: Adding input device Video Bus
>(**) Video Bus: always reports core events
>(**) Video Bus: Device: "/dev/input/event7"
>(II) Video Bus: Found keys
>(II) Video Bus: Configuring as keyboard
>(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) config/hal: Adding input device Power Button
>(**) Power Button: always reports core events
>(**) Power Button: Device: "/dev/input/event5"
>(II) Power Button: Found keys
>(II) Power Button: Configuring as keyboard
>(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"

Actions: View

Attachments on bug 582982: 344621 | 350808 | 350810 | 350832 | 354576