Attachment 426235 Details for Bug 682173

dmesg dump

dmesg.log (text/plain), 245.37 KB, created by Michael Lashkevich on 2011-04-22 10:36:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michael Lashkevich

Created: 2011-04-22 10:36:10 UTC

Size: 245.37 KB

patch

obsolete

>Info fld=0x0
>[631985.280195] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.280200] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.280206] end_request: I/O error, dev sdb, sector 0
>[631985.282304] sd 19:0:0:0: [sdb] Device not ready
>[631985.282307] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.282311] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.282314] Info fld=0x0
>[631985.282322] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.282327] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.282334] end_request: I/O error, dev sdb, sector 0
>[631985.284178] sd 19:0:0:0: [sdb] Device not ready
>[631985.284181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.284184] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.284188] Info fld=0x0
>[631985.284195] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.284200] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.284207] end_request: I/O error, dev sdb, sector 0
>[631985.286177] sd 19:0:0:0: [sdb] Device not ready
>[631985.286180] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.286184] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.286187] Info fld=0x0
>[631985.286194] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.286200] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.286206] end_request: I/O error, dev sdb, sector 0
>[631985.288179] sd 19:0:0:0: [sdb] Device not ready
>[631985.288182] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.288185] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.288189] Info fld=0x0
>[631985.288196] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.288201] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 80 00 00 08 00
>[631985.288208] end_request: I/O error, dev sdb, sector 128
>[631985.290179] sd 19:0:0:0: [sdb] Device not ready
>[631985.290182] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.290186] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.290189] Info fld=0x0
>[631985.290196] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.290202] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 80 00 00 08 00
>[631985.290208] end_request: I/O error, dev sdb, sector 128
>[631985.292180] sd 19:0:0:0: [sdb] Device not ready
>[631985.292183] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.292186] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.292190] Info fld=0x0
>[631985.292197] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.292202] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 10 00 00 08 00
>[631985.292209] end_request: I/O error, dev sdb, sector 16
>[631985.294178] sd 19:0:0:0: [sdb] Device not ready
>[631985.294181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.294185] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.294188] Info fld=0x0
>[631985.294196] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.294201] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.294207] end_request: I/O error, dev sdb, sector 0
>[631985.296178] sd 19:0:0:0: [sdb] Device not ready
>[631985.296181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.296184] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.296187] Info fld=0x0
>[631985.296195] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.296199] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.296206] end_request: I/O error, dev sdb, sector 0
>[631985.298178] sd 19:0:0:0: [sdb] Device not ready
>[631985.298181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.298184] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.298188] Info fld=0x0
>[631985.298195] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.298200] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 08 00 00 08 00
>[631985.298207] end_request: I/O error, dev sdb, sector 8
>[631985.300178] sd 19:0:0:0: [sdb] Device not ready
>[631985.300181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.300185] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.300188] Info fld=0x0
>[631985.300195] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.300200] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 10 00 00 08 00
>[631985.300207] end_request: I/O error, dev sdb, sector 16
>[631985.302178] sd 19:0:0:0: [sdb] Device not ready
>[631985.302181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.302185] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.302188] Info fld=0x0
>[631985.302196] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.302201] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.302207] end_request: I/O error, dev sdb, sector 0
>[631985.304178] sd 19:0:0:0: [sdb] Device not ready
>[631985.304181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.304185] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.304188] Info fld=0x0
>[631985.304195] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.304200] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.304207] end_request: I/O error, dev sdb, sector 0
>[631985.306178] sd 19:0:0:0: [sdb] Device not ready
>[631985.306181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.306185] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.306188] Info fld=0x0
>[631985.306195] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.306200] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.306207] end_request: I/O error, dev sdb, sector 0
>[631985.308177] sd 19:0:0:0: [sdb] Device not ready
>[631985.308181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.308184] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.308188] Info fld=0x0
>[631985.308195] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.308200] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.308207] end_request: I/O error, dev sdb, sector 0
>[631985.310178] sd 19:0:0:0: [sdb] Device not ready
>[631985.310181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.310184] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.310187] Info fld=0x0
>[631985.310194] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.310199] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.310206] end_request: I/O error, dev sdb, sector 0
>[631985.312179] sd 19:0:0:0: [sdb] Device not ready
>[631985.312182] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.312186] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.312189] Info fld=0x0
>[631985.312196] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.312202] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.312208] end_request: I/O error, dev sdb, sector 0
>[631985.314179] sd 19:0:0:0: [sdb] Device not ready
>[631985.314182] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.314186] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.314189] Info fld=0x0
>[631985.314196] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.314201] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 08 00 00 08 00
>[631985.314208] end_request: I/O error, dev sdb, sector 8
>[631985.316934] sd 19:0:0:0: [sdb] Device not ready
>[631985.316937] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.316941] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.316945] Info fld=0x0
>[631985.316953] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.316959] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 80 00 00 08 00
>[631985.316965] end_request: I/O error, dev sdb, sector 128
>[631985.319304] sd 19:0:0:0: [sdb] Device not ready
>[631985.319307] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.319310] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.319314] Info fld=0x0
>[631985.319321] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.319326] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.319332] end_request: I/O error, dev sdb, sector 0
>[631985.321178] sd 19:0:0:0: [sdb] Device not ready
>[631985.321181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.321184] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.321188] Info fld=0x0
>[631985.321195] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.321200] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.321207] end_request: I/O error, dev sdb, sector 0
>[631985.323178] sd 19:0:0:0: [sdb] Device not ready
>[631985.323181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.323184] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.323188] Info fld=0x0
>[631985.323195] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.323200] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 10 00 00 00 08 00
>[631985.323206] end_request: I/O error, dev sdb, sector 4096
>[631985.325179] sd 19:0:0:0: [sdb] Device not ready
>[631985.325182] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.325185] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.325189] Info fld=0x0
>[631985.325196] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.325201] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.325208] end_request: I/O error, dev sdb, sector 0
>[631985.327178] sd 19:0:0:0: [sdb] Device not ready
>[631985.327181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.327185] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.327188] Info fld=0x0
>[631985.327196] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.327201] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.327207] end_request: I/O error, dev sdb, sector 0
>[631985.329179] sd 19:0:0:0: [sdb] Device not ready
>[631985.329182] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.329185] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.329189] Info fld=0x0
>[631985.329196] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.329201] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.329208] end_request: I/O error, dev sdb, sector 0
>[631985.331178] sd 19:0:0:0: [sdb] Device not ready
>[631985.331181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.331184] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.331188] Info fld=0x0
>[631985.331195] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.331200] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.331206] end_request: I/O error, dev sdb, sector 0
>[631985.333179] sd 19:0:0:0: [sdb] Device not ready
>[631985.333182] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.333186] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.333189] Info fld=0x0
>[631985.333196] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.333202] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.333208] end_request: I/O error, dev sdb, sector 0
>[631985.335178] sd 19:0:0:0: [sdb] Device not ready
>[631985.335181] sd 19:0:0:0: [sdb]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[631985.335184] sd 19:0:0:0: [sdb]  Sense Key : Not Ready [current] 
>[631985.335188] Info fld=0x0
>[631985.335195] sd 19:0:0:0: [sdb]  <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
>[631985.335200] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
>[631985.335207] end_request: I/O error, dev sdb, sector 0
>[632009.380014] SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:1e:33:43:7d:fa:00:e0:52:ac:d0:1b:08:00 SRC=192.168.1.4 DST=192.168.1.3 LEN=48 TOS=0x00 PREC=0x00 TTL=128 ID=52 DF PROTO=TCP SPT=1038 DPT=22 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405B401010402) 
>[632117.572120] sd 19:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
>[632117.573742] sd 19:0:0:0: [sdb] Assuming drive cache: write through
>[632117.580361] sd 19:0:0:0: [sdb] Assuming drive cache: write through
>[632117.583418]  sdb: sdb1
>[632118.693024] usb 2-2: USB disconnect, address 78
>[632118.701091] scsi 19:0:0:0: [sdb] Unhandled error code
>[632118.701095] scsi 19:0:0:0: [sdb]  Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
>[632118.701110] scsi 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 6a 8f 80 00 00 40 00
>[632118.701120] end_request: I/O error, dev sdb, sector 6983552
>[632118.701136] quiet_error: 423 callbacks suppressed
>[632118.701144] Buffer I/O error on device sdb1, logical block 871920
>[632118.701156] Buffer I/O error on device sdb1, logical block 871921
>[632118.701164] Buffer I/O error on device sdb1, logical block 871922
>[632118.701171] Buffer I/O error on device sdb1, logical block 871923
>[632118.701179] Buffer I/O error on device sdb1, logical block 871924
>[632118.701187] Buffer I/O error on device sdb1, logical block 871925
>[632118.701195] Buffer I/O error on device sdb1, logical block 871926
>[632118.701202] Buffer I/O error on device sdb1, logical block 871927
>[632118.862267] hub 2-0:1.0: unable to enumerate USB device on port 2
>[632124.124028] usb 2-2: new high speed USB device using ehci_hcd and address 80
>[632124.636027] usb 2-2: device not accepting address 80, error -71
>[632124.738031] usb 2-2: new high speed USB device using ehci_hcd and address 81
>[632124.856027] usb 2-2: New USB device found, idVendor=058f, idProduct=6362
>[632124.856031] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[632124.856035] usb 2-2: Product: Mass Storage Device
>[632124.856037] usb 2-2: Manufacturer: Generic
>[632124.856039] usb 2-2: SerialNumber: 058F312D81B
>[632124.863933] scsi20 : usb-storage 2-2:1.0
>[632125.866433] scsi 20:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[632125.866678] sd 20:0:0:0: Attached scsi generic sg2 type 0
>[632125.868608] scsi 20:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[632125.868819] sd 20:0:0:1: Attached scsi generic sg3 type 0
>[632126.431072] scsi 20:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[632126.431330] sd 20:0:0:2: Attached scsi generic sg4 type 0
>[632126.433831] scsi 20:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[632126.434071] sd 20:0:0:3: Attached scsi generic sg5 type 0
>[632126.436067] sd 20:0:0:1: [sdc] Attached SCSI removable disk
>[632126.438187] sd 20:0:0:2: [sdd] Attached SCSI removable disk
>[632126.438929] sd 20:0:0:3: [sde] Attached SCSI removable disk
>[632126.439441] sd 20:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
>[632126.440569] sd 20:0:0:0: [sdb] Write Protect is off
>[632126.440575] sd 20:0:0:0: [sdb] Mode Sense: 03 00 00 00
>[632126.440578] sd 20:0:0:0: [sdb] Assuming drive cache: write through
>[632126.444803] sd 20:0:0:0: [sdb] Assuming drive cache: write through
>[632126.447116]  sdb: sdb1
>[632126.449770] sd 20:0:0:0: [sdb] Assuming drive cache: write through
>[632126.449788] sd 20:0:0:0: [sdb] Attached SCSI removable disk
>[632143.555295] usb 2-2: USB disconnect, address 81
>[632151.926029] usb 2-2: new high speed USB device using ehci_hcd and address 82
>[632152.042444] usb 2-2: New USB device found, idVendor=058f, idProduct=6362
>[632152.042448] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[632152.042451] usb 2-2: Product: Mass Storage Device
>[632152.042453] usb 2-2: Manufacturer: Generic
>[632152.042455] usb 2-2: SerialNumber: 058F312D81B
>[632152.050015] scsi21 : usb-storage 2-2:1.0
>[632153.052844] scsi 21:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[632153.053115] sd 21:0:0:0: Attached scsi generic sg2 type 0
>[632153.055163] scsi 21:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[632153.055421] sd 21:0:0:1: Attached scsi generic sg3 type 0
>[632153.617738] scsi 21:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[632153.617981] sd 21:0:0:2: Attached scsi generic sg4 type 0
>[632153.620620] scsi 21:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[632153.620835] sd 21:0:0:3: Attached scsi generic sg5 type 0
>[632153.622472] sd 21:0:0:1: [sdc] Attached SCSI removable disk
>[632153.622984] sd 21:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
>[632153.623720] sd 21:0:0:2: [sdd] Attached SCSI removable disk
>[632153.625489] sd 21:0:0:0: [sdb] Write Protect is off
>[632153.625508] sd 21:0:0:0: [sdb] Mode Sense: 03 00 00 00
>[632153.625511] sd 21:0:0:0: [sdb] Assuming drive cache: write through
>[632153.629131] sd 21:0:0:3: [sde] Attached SCSI removable disk
>[632153.631858] sd 21:0:0:0: [sdb] Assuming drive cache: write through
>[632153.634180]  sdb: sdb1
>[632153.636348] sd 21:0:0:0: [sdb] Assuming drive cache: write through
>[632153.636365] sd 21:0:0:0: [sdb] Attached SCSI removable disk
>[632206.853194] usb 2-2: USB disconnect, address 82
>[632212.966027] usb 2-2: new high speed USB device using ehci_hcd and address 83
>[632213.082446] usb 2-2: New USB device found, idVendor=058f, idProduct=6362
>[632213.082450] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[632213.082454] usb 2-2: Product: Mass Storage Device
>[632213.082456] usb 2-2: Manufacturer: Generic
>[632213.082458] usb 2-2: SerialNumber: 058F312D81B
>[632213.090016] scsi22 : usb-storage 2-2:1.0
>[632214.092990] scsi 22:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[632214.093295] sd 22:0:0:0: Attached scsi generic sg2 type 0
>[632214.095209] scsi 22:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[632214.095418] sd 22:0:0:1: Attached scsi generic sg3 type 0
>[632214.657613] scsi 22:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[632214.657851] sd 22:0:0:2: Attached scsi generic sg4 type 0
>[632214.661786] sd 22:0:0:1: [sdc] Attached SCSI removable disk
>[632214.662438] scsi 22:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[632214.662664] sd 22:0:0:3: Attached scsi generic sg5 type 0
>[632214.662974] sd 22:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
>[632214.663732] sd 22:0:0:2: [sdd] Attached SCSI removable disk
>[632214.665733] sd 22:0:0:0: [sdb] Write Protect is off
>[632214.665738] sd 22:0:0:0: [sdb] Mode Sense: 03 00 00 00
>[632214.665741] sd 22:0:0:0: [sdb] Assuming drive cache: write through
>[632214.667968] sd 22:0:0:3: [sde] Attached SCSI removable disk
>[632214.673451] sd 22:0:0:0: [sdb] Assuming drive cache: write through
>[632214.678143]  sdb: sdb1
>[632214.680356] sd 22:0:0:0: [sdb] Assuming drive cache: write through
>[632214.680374] sd 22:0:0:0: [sdb] Attached SCSI removable disk
>[632312.679724] usb 2-2: USB disconnect, address 83
>[632316.765031] usb 2-2: new high speed USB device using ehci_hcd and address 84
>[632316.828352] hub 2-0:1.0: unable to enumerate USB device on port 2
>[632317.206054] usb 5-2: new full speed USB device using uhci_hcd and address 38
>[632317.333933] usb 5-2: not running at top speed; connect to a high speed hub
>[632317.361936] usb 5-2: New USB device found, idVendor=058f, idProduct=6362
>[632317.361941] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[632317.361944] usb 5-2: Product: Mass Storage Device
>[632317.361946] usb 5-2: Manufacturer: Generic
>[632317.361948] usb 5-2: SerialNumber: 058F312D81B
>[632317.369015] scsi23 : usb-storage 5-2:1.0
>[632318.375968] scsi 23:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[632318.376230] sd 23:0:0:0: Attached scsi generic sg2 type 0
>[632318.380034] scsi 23:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[632318.380261] sd 23:0:0:1: Attached scsi generic sg3 type 0
>[632318.943992] scsi 23:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[632318.944255] sd 23:0:0:2: Attached scsi generic sg4 type 0
>[632318.956216] sd 23:0:0:1: [sdc] Attached SCSI removable disk
>[632318.958995] scsi 23:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[632318.959247] sd 23:0:0:3: Attached scsi generic sg5 type 0
>[632318.967250] sd 23:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
>[632318.976983] sd 23:0:0:2: [sdd] Attached SCSI removable disk
>[632318.981983] sd 23:0:0:3: [sde] Attached SCSI removable disk
>[632318.987039] sd 23:0:0:0: [sdb] Write Protect is off
>[632318.987046] sd 23:0:0:0: [sdb] Mode Sense: 03 00 00 00
>[632318.987049] sd 23:0:0:0: [sdb] Assuming drive cache: write through
>[632319.003977] sd 23:0:0:0: [sdb] Assuming drive cache: write through
>[632319.010065]  sdb: sdb1
>[632319.022997] sd 23:0:0:0: [sdb] Assuming drive cache: write through
>[632319.023035] sd 23:0:0:0: [sdb] Attached SCSI removable disk
>[635803.000069] usb 5-2: USB disconnect, address 38
>[635816.706027] usb 5-2: new full speed USB device using uhci_hcd and address 39
>[635819.416093] hub 5-0:1.0: unable to enumerate USB device on port 2
>[635821.956062] usb 5-2: new full speed USB device using uhci_hcd and address 40
>[635822.088216] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[635822.088221] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[635822.092298] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[635822.232768] ipaq 5-2:1.0: PocketPC PDA converter detected
>[635822.234398] usb 5-2: PocketPC PDA converter now attached to ttyUSB9
>[635847.250052] usb 5-2: USB disconnect, address 40
>[635847.250235] ipaq ttyUSB9: PocketPC PDA converter now disconnected from ttyUSB9
>[635847.250245] ipaq 5-2:1.0: device disconnected
>[635851.456063] usb 5-2: new full speed USB device using uhci_hcd and address 41
>[635851.588394] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[635851.588399] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[635851.592487] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[635851.599769] ipaq 5-2:1.0: PocketPC PDA converter detected
>[635851.601630] usb 5-2: PocketPC PDA converter now attached to ttyUSB10
>[635875.250049] usb 5-2: USB disconnect, address 41
>[635875.250244] ipaq ttyUSB10: PocketPC PDA converter now disconnected from ttyUSB10
>[635875.250255] ipaq 5-2:1.0: device disconnected
>[635879.456027] usb 5-2: new full speed USB device using uhci_hcd and address 42
>[635879.588579] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[635879.588583] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[635879.592662] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[635879.598712] ipaq 5-2:1.0: PocketPC PDA converter detected
>[635879.600758] usb 5-2: PocketPC PDA converter now attached to ttyUSB11
>[635903.250052] usb 5-2: USB disconnect, address 42
>[635903.250247] ipaq ttyUSB11: PocketPC PDA converter now disconnected from ttyUSB11
>[635903.250258] ipaq 5-2:1.0: device disconnected
>[635907.456032] usb 5-2: new full speed USB device using uhci_hcd and address 43
>[635907.588899] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[635907.588904] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[635907.593203] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[635907.600143] ipaq 5-2:1.0: PocketPC PDA converter detected
>[635907.603986] usb 5-2: PocketPC PDA converter now attached to ttyUSB12
>[635931.500053] usb 5-2: USB disconnect, address 43
>[635931.500248] ipaq ttyUSB12: PocketPC PDA converter now disconnected from ttyUSB12
>[635931.500265] ipaq 5-2:1.0: device disconnected
>[635935.956033] usb 5-2: new full speed USB device using uhci_hcd and address 44
>[635936.088948] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[635936.088953] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[635936.093082] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[635936.106619] ipaq 5-2:1.0: PocketPC PDA converter detected
>[635936.108144] usb 5-2: PocketPC PDA converter now attached to ttyUSB12
>[635943.500054] usb 5-2: USB disconnect, address 44
>[635943.500253] ipaq ttyUSB12: PocketPC PDA converter now disconnected from ttyUSB12
>[635943.500264] ipaq 5-2:1.0: device disconnected
>[635946.721032] usb 5-2: new full speed USB device using uhci_hcd and address 45
>[635946.852998] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[635946.853013] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[635946.858092] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[635946.865786] ipaq 5-2:1.0: PocketPC PDA converter detected
>[635946.867217] usb 5-2: PocketPC PDA converter now attached to ttyUSB13
>[635971.250063] usb 5-2: USB disconnect, address 45
>[635971.250296] ipaq ttyUSB13: PocketPC PDA converter now disconnected from ttyUSB13
>[635971.250306] ipaq 5-2:1.0: device disconnected
>[635975.456030] usb 5-2: new full speed USB device using uhci_hcd and address 46
>[635975.589180] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[635975.589184] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[635975.594760] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[635975.599726] ipaq 5-2:1.0: PocketPC PDA converter detected
>[635975.601370] usb 5-2: PocketPC PDA converter now attached to ttyUSB14
>[635999.250053] usb 5-2: USB disconnect, address 46
>[635999.250260] ipaq ttyUSB14: PocketPC PDA converter now disconnected from ttyUSB14
>[635999.250271] ipaq 5-2:1.0: device disconnected
>[636003.456031] usb 5-2: new full speed USB device using uhci_hcd and address 47
>[636003.588360] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636003.588364] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636003.593449] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636003.598725] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636003.600546] usb 5-2: PocketPC PDA converter now attached to ttyUSB15
>[636027.250137] usb 5-2: USB disconnect, address 47
>[636027.250341] ipaq ttyUSB15: PocketPC PDA converter now disconnected from ttyUSB15
>[636027.250352] ipaq 5-2:1.0: device disconnected
>[636031.456025] usb 5-2: new full speed USB device using uhci_hcd and address 48
>[636031.588536] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636031.588540] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636031.592626] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636031.598694] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636031.600728] usb 5-2: PocketPC PDA converter now attached to ttyUSB16
>[636055.250053] usb 5-2: USB disconnect, address 48
>[636055.250257] ipaq ttyUSB16: PocketPC PDA converter now disconnected from ttyUSB16
>[636055.250268] ipaq 5-2:1.0: device disconnected
>[636059.456033] usb 5-2: new full speed USB device using uhci_hcd and address 49
>[636059.588712] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636059.588717] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636059.593218] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636059.684341] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636059.685907] usb 5-2: PocketPC PDA converter now attached to ttyUSB17
>[636083.250055] usb 5-2: USB disconnect, address 49
>[636083.250261] ipaq ttyUSB17: PocketPC PDA converter now disconnected from ttyUSB17
>[636083.250272] ipaq 5-2:1.0: device disconnected
>[636087.456025] usb 5-2: new full speed USB device using uhci_hcd and address 50
>[636087.589895] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636087.589900] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636087.593992] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636087.600731] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636087.602102] usb 5-2: PocketPC PDA converter now attached to ttyUSB18
>[636111.250049] usb 5-2: USB disconnect, address 50
>[636111.250246] ipaq ttyUSB18: PocketPC PDA converter now disconnected from ttyUSB18
>[636111.250256] ipaq 5-2:1.0: device disconnected
>[636115.456027] usb 5-2: new full speed USB device using uhci_hcd and address 51
>[636115.587075] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636115.587079] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636115.591166] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636115.598697] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636115.600263] usb 5-2: PocketPC PDA converter now attached to ttyUSB19
>[636139.250051] usb 5-2: USB disconnect, address 51
>[636139.250247] ipaq ttyUSB19: PocketPC PDA converter now disconnected from ttyUSB19
>[636139.250257] ipaq 5-2:1.0: device disconnected
>[636143.456023] usb 5-2: new full speed USB device using uhci_hcd and address 52
>[636143.587250] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636143.587254] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636143.591343] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636143.597710] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636143.599440] usb 5-2: PocketPC PDA converter now attached to ttyUSB20
>[636167.250053] usb 5-2: USB disconnect, address 52
>[636167.250247] ipaq ttyUSB20: PocketPC PDA converter now disconnected from ttyUSB20
>[636167.250258] ipaq 5-2:1.0: device disconnected
>[636171.472165] usb 5-2: new full speed USB device using uhci_hcd and address 53
>[636171.603435] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636171.603440] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636171.607519] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636171.613728] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636171.615628] usb 5-2: PocketPC PDA converter now attached to ttyUSB21
>[636195.250048] usb 5-2: USB disconnect, address 53
>[636195.250239] ipaq ttyUSB21: PocketPC PDA converter now disconnected from ttyUSB21
>[636195.250250] ipaq 5-2:1.0: device disconnected
>[636199.456024] usb 5-2: new full speed USB device using uhci_hcd and address 54
>[636199.587619] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636199.587623] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636199.591719] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636199.597694] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636199.599813] usb 5-2: PocketPC PDA converter now attached to ttyUSB22
>[636223.250053] usb 5-2: USB disconnect, address 54
>[636223.250249] ipaq ttyUSB22: PocketPC PDA converter now disconnected from ttyUSB22
>[636223.250260] ipaq 5-2:1.0: device disconnected
>[636227.456026] usb 5-2: new full speed USB device using uhci_hcd and address 55
>[636227.587805] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636227.587809] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636227.591902] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636227.598333] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636227.599999] usb 5-2: PocketPC PDA converter now attached to ttyUSB23
>[636251.250050] usb 5-2: USB disconnect, address 55
>[636251.250248] ipaq ttyUSB23: PocketPC PDA converter now disconnected from ttyUSB23
>[636251.250259] ipaq 5-2:1.0: device disconnected
>[636255.456021] usb 5-2: new full speed USB device using uhci_hcd and address 56
>[636255.587988] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636255.587993] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636255.592106] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636255.597610] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636255.599198] usb 5-2: PocketPC PDA converter now attached to ttyUSB24
>[636266.250051] usb 5-2: USB disconnect, address 56
>[636266.250247] ipaq ttyUSB24: PocketPC PDA converter now disconnected from ttyUSB24
>[636266.250258] ipaq 5-2:1.0: device disconnected
>[636399.843761] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[636774.706025] usb 5-2: new full speed USB device using uhci_hcd and address 57
>[636774.838375] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636774.838379] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636774.842465] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636774.847747] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636774.849568] usb 5-2: PocketPC PDA converter now attached to ttyUSB25
>[636799.250050] usb 5-2: USB disconnect, address 57
>[636799.250237] ipaq ttyUSB25: PocketPC PDA converter now disconnected from ttyUSB25
>[636799.250247] ipaq 5-2:1.0: device disconnected
>[636803.456023] usb 5-2: new full speed USB device using uhci_hcd and address 58
>[636803.587555] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636803.587560] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636803.591651] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636803.597717] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636803.599748] usb 5-2: PocketPC PDA converter now attached to ttyUSB26
>[636827.250052] usb 5-2: USB disconnect, address 58
>[636827.250238] ipaq ttyUSB26: PocketPC PDA converter now disconnected from ttyUSB26
>[636827.250249] ipaq 5-2:1.0: device disconnected
>[636831.456024] usb 5-2: new full speed USB device using uhci_hcd and address 59
>[636831.587730] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636831.587734] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636831.591827] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636831.598743] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636831.600963] usb 5-2: PocketPC PDA converter now attached to ttyUSB27
>[636855.500049] usb 5-2: USB disconnect, address 59
>[636855.500232] ipaq ttyUSB27: PocketPC PDA converter now disconnected from ttyUSB27
>[636855.500247] ipaq 5-2:1.0: device disconnected
>[636859.956024] usb 5-2: new full speed USB device using uhci_hcd and address 60
>[636860.087912] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636860.087916] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636860.092000] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636860.173822] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636860.175127] usb 5-2: PocketPC PDA converter now attached to ttyUSB27
>[636867.500045] usb 5-2: USB disconnect, address 60
>[636867.500233] ipaq ttyUSB27: PocketPC PDA converter now disconnected from ttyUSB27
>[636867.500244] ipaq 5-2:1.0: device disconnected
>[636871.007023] usb 5-2: new full speed USB device using uhci_hcd and address 61
>[636871.135980] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636871.135984] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636871.140087] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636871.145724] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636871.147220] usb 5-2: PocketPC PDA converter now attached to ttyUSB28
>[636895.250049] usb 5-2: USB disconnect, address 61
>[636895.250237] ipaq ttyUSB28: PocketPC PDA converter now disconnected from ttyUSB28
>[636895.250248] ipaq 5-2:1.0: device disconnected
>[636899.706025] usb 5-2: new full speed USB device using uhci_hcd and address 62
>[636899.838161] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636899.838165] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636899.842244] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636899.847707] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636899.849353] usb 5-2: PocketPC PDA converter now attached to ttyUSB29
>[636924.250051] usb 5-2: USB disconnect, address 62
>[636924.250243] ipaq ttyUSB29: PocketPC PDA converter now disconnected from ttyUSB29
>[636924.250254] ipaq 5-2:1.0: device disconnected
>[636928.456042] usb 5-2: new full speed USB device using uhci_hcd and address 63
>[636928.588343] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636928.588348] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636928.592438] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636928.603742] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636928.605556] usb 5-2: PocketPC PDA converter now attached to ttyUSB30
>[636952.250050] usb 5-2: USB disconnect, address 63
>[636952.250238] ipaq ttyUSB30: PocketPC PDA converter now disconnected from ttyUSB30
>[636952.250249] ipaq 5-2:1.0: device disconnected
>[636956.456025] usb 5-2: new full speed USB device using uhci_hcd and address 64
>[636956.588519] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636956.588523] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636956.592613] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636956.598767] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636956.600715] usb 5-2: PocketPC PDA converter now attached to ttyUSB31
>[636980.250053] usb 5-2: USB disconnect, address 64
>[636980.250250] ipaq ttyUSB31: PocketPC PDA converter now disconnected from ttyUSB31
>[636980.250261] ipaq 5-2:1.0: device disconnected
>[636984.483024] usb 5-2: new full speed USB device using uhci_hcd and address 65
>[636984.614695] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[636984.614699] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[636984.618787] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[636984.623728] ipaq 5-2:1.0: PocketPC PDA converter detected
>[636984.625888] usb 5-2: PocketPC PDA converter now attached to ttyUSB32
>[637008.250052] usb 5-2: USB disconnect, address 65
>[637008.250247] ipaq ttyUSB32: PocketPC PDA converter now disconnected from ttyUSB32
>[637008.250259] ipaq 5-2:1.0: device disconnected
>[637012.456023] usb 5-2: new full speed USB device using uhci_hcd and address 66
>[637012.588869] usb 5-2: New USB device found, idVendor=045e, idProduct=00ce
>[637012.588873] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[637012.592962] hdj_probe() unsupported device, idVendor45e, idProduct:ce
>[637012.598690] ipaq 5-2:1.0: PocketPC PDA converter detected
>[637012.600086] usb 5-2: PocketPC PDA converter now attached to ttyUSB33
>[637032.250053] usb 5-2: USB disconnect, address 66
>[637032.250242] ipaq ttyUSB33: PocketPC PDA converter now disconnected from ttyUSB33
>[637032.250253] ipaq 5-2:1.0: device disconnected
>[638294.829596] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[640094.859913] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[652998.709145] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[653005.256798] usbcore: deregistering interface driver rtl8187
>[653005.539035] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[653008.080133] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[653008.080137] PM: Basic memory bitmaps created
>[653009.142917] Syncing filesystems ... done.
>[653009.217969] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[653009.230095] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[653009.242532] PM: Preallocating image memory... done (allocated 140690 pages)
>[653013.378612] PM: Allocated 562760 kbytes in 4.13 seconds (136.26 MB/s)
>[653013.378615] Suspending console(s) (use no_console_suspend to debug)
>[653013.379648] ata_piix 0000:00:1f.1: PCI INT A disabled
>[653013.481110] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[653013.780022] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[653013.780553] PM: freeze of devices complete after 401.719 msecs
>[653013.781121] PM: late freeze of devices complete after 0.562 msecs
>[653013.781255] ACPI: Preparing to enter system sleep state S4
>[653013.786757] PM: Saving platform NVS memory
>[653013.796478] Disabling non-boot CPUs ...
>[653013.796596] PM: Creating hibernation image:
>[653013.797004] PM: Need to copy 114731 pages
>[653013.797004] PM: Normal pages needed: 107051 + 1024, available pages: 135083
>[653013.797004] PM: Restoring platform NVS memory
>[653013.797004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[653013.797004] CPU0: Thermal monitoring handled by SMI
>[653013.797004] ACPI: Waking up from system sleep state S4
>[653013.835867] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[653013.836225] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[653013.836265] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[653013.836375] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[653013.836383] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[653013.836503] PM: early restore of devices complete after 0.858 msecs
>[653013.869026] i915 0000:00:02.0: setting latency timer to 64
>[653013.869550] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[653013.869592] usb usb3: root hub lost power or was reset
>[653013.869608] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[653013.869648] usb usb4: root hub lost power or was reset
>[653013.869664] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[653013.869682] usb usb1: root hub lost power or was reset
>[653013.873557] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[653013.877073] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[653013.877079] pci 0000:00:1c.0: setting latency timer to 64
>[653013.877087] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[653013.877091] pci 0000:00:1c.4: setting latency timer to 64
>[653013.877099] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[653013.877139] usb usb5: root hub lost power or was reset
>[653013.877152] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[653013.877191] usb usb6: root hub lost power or was reset
>[653013.877202] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[653013.877242] usb usb7: root hub lost power or was reset
>[653013.877255] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[653013.877268] usb usb2: root hub lost power or was reset
>[653013.879020] pci 0000:00:1e.0: setting latency timer to 64
>[653013.879030] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[653013.879035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[653013.879056] ahci 0000:00:1f.2: setting latency timer to 64
>[653013.882576] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[653013.882596] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[653013.882602] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[653013.882647] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[653013.887502] r8169 0000:02:00.0: eth0: link down
>[653013.887966] sd 0:0:0:0: [sda] Starting disk
>[653014.048284] ata4.00: configured for UDMA/33
>[653014.187055] ata2: SATA link down (SStatus 0 SControl 300)
>[653014.204053] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[653014.340029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[653014.341269] ata1.00: configured for UDMA/100
>[653014.420051] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[653014.786055] usb 5-1: reset low speed USB device using uhci_hcd and address 6
>[653015.081572] PM: restore of devices complete after 1217.725 msecs
>[653015.089287] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[653015.089291] Restarting tasks ... done.
>[653015.102704] PM: Basic memory bitmaps freed
>[653015.102713] video LNXVIDEO:00: Restoring backlight state
>[653015.501435] r8169 0000:02:00.0: eth0: link up
>[653063.359652] usbcore: deregistering interface driver ndiswrapper
>[653064.376912] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[653065.374640] usbcore: registered new interface driver ndiswrapper
>[653065.963415] cfg80211: Calling CRDA to update world regulatory domain
>[653066.642936] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[653066.645199] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[653066.666708] rtl8187: Customer ID is 0x04
>[653066.668084] Registered led device: rtl8187-phy0::radio
>[653066.668668] Registered led device: rtl8187-phy0::tx
>[653066.669378] Registered led device: rtl8187-phy0::rx
>[653066.670121] rtl8187: wireless switch is on
>[653066.670870] usbcore: registered new interface driver rtl8187
>[653068.181063] cfg80211: World regulatory domain updated:
>[653068.181067]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[653068.181070]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[653068.181073]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[653068.181076]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[653068.181078]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[653068.181081]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[653073.313520] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[653968.673256] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[656337.354513] usbcore: deregistering interface driver rtl8187
>[656337.506039] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[656341.567163] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[656341.567167] PM: Basic memory bitmaps created
>[656341.699400] Syncing filesystems ... done.
>[656341.716446] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[656341.729090] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[656341.741787] PM: Preallocating image memory... done (allocated 140692 pages)
>[656342.088203] PM: Allocated 562768 kbytes in 0.34 seconds (1655.20 MB/s)
>[656342.088206] Suspending console(s) (use no_console_suspend to debug)
>[656342.089210] ata_piix 0000:00:1f.1: PCI INT A disabled
>[656342.190092] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[656342.490017] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[656342.542202] PM: freeze of devices complete after 453.788 msecs
>[656342.542743] PM: late freeze of devices complete after 0.536 msecs
>[656342.542877] ACPI: Preparing to enter system sleep state S4
>[656342.549051] PM: Saving platform NVS memory
>[656342.559074] Disabling non-boot CPUs ...
>[656342.559191] PM: Creating hibernation image:
>[656342.560004] PM: Need to copy 114776 pages
>[656342.560004] PM: Normal pages needed: 105127 + 1024, available pages: 133068
>[656342.560004] PM: Restoring platform NVS memory
>[656342.560004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[656342.560004] CPU0: Thermal monitoring handled by SMI
>[656342.560004] ACPI: Waking up from system sleep state S4
>[656342.600319] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[656342.600663] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[656342.600703] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[656342.600812] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[656342.600820] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[656342.600940] PM: early restore of devices complete after 0.842 msecs
>[656342.634025] i915 0000:00:02.0: setting latency timer to 64
>[656342.634573] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[656342.634616] usb usb3: root hub lost power or was reset
>[656342.634632] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[656342.634671] usb usb4: root hub lost power or was reset
>[656342.634688] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[656342.634706] usb usb1: root hub lost power or was reset
>[656342.638587] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[656342.642233] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[656342.642239] pci 0000:00:1c.0: setting latency timer to 64
>[656342.642247] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[656342.642251] pci 0000:00:1c.4: setting latency timer to 64
>[656342.642259] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[656342.642299] usb usb5: root hub lost power or was reset
>[656342.642311] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[656342.642351] usb usb6: root hub lost power or was reset
>[656342.642362] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[656342.642403] usb usb7: root hub lost power or was reset
>[656342.642416] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[656342.642429] usb usb2: root hub lost power or was reset
>[656342.644018] pci 0000:00:1e.0: setting latency timer to 64
>[656342.644030] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[656342.644035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[656342.644055] ahci 0000:00:1f.2: setting latency timer to 64
>[656342.646776] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[656342.646796] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[656342.646802] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[656342.646847] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[656342.651813] r8169 0000:02:00.0: eth0: link down
>[656342.653719] sd 0:0:0:0: [sda] Starting disk
>[656342.813284] ata4.00: configured for UDMA/33
>[656342.954059] ata2: SATA link down (SStatus 0 SControl 300)
>[656342.969052] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[656343.105032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[656343.106256] ata1.00: configured for UDMA/100
>[656343.185050] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[656343.302086] PM: restore of devices complete after 673.761 msecs
>[656343.309289] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[656343.309295] Restarting tasks ... 
>[656343.309410] usb 5-1: USB disconnect, address 6
>[656343.321561] done.
>[656343.330471] PM: Basic memory bitmaps freed
>[656343.330481] video LNXVIDEO:00: Restoring backlight state
>[656364.410604] usbcore: deregistering interface driver ndiswrapper
>[656364.479167] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[656364.663593] usbcore: registered new interface driver ndiswrapper
>[656365.030362] cfg80211: Calling CRDA to update world regulatory domain
>[656365.480270] cfg80211: World regulatory domain updated:
>[656365.480276]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656365.480280]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656365.480285]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656365.480288]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656365.480290]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656365.480296]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656365.824732] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[656365.827613] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[656365.864113] rtl8187: Customer ID is 0x04
>[656365.864210] Registered led device: rtl8187-phy0::radio
>[656365.864251] Registered led device: rtl8187-phy0::tx
>[656365.864289] Registered led device: rtl8187-phy0::rx
>[656365.870036] rtl8187: wireless switch is on
>[656365.870113] usbcore: registered new interface driver rtl8187
>[656370.711633] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[656435.486106] usbcore: deregistering interface driver rtl8187
>[656435.658302] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[656437.742547] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[656437.742551] PM: Basic memory bitmaps created
>[656437.848735] Syncing filesystems ... done.
>[656437.865912] Freezing user space processes ... (elapsed 0.03 seconds) done.
>[656437.900062] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[656437.912772] PM: Preallocating image memory... done (allocated 140692 pages)
>[656438.149558] PM: Allocated 562768 kbytes in 0.23 seconds (2446.81 MB/s)
>[656438.149561] Suspending console(s) (use no_console_suspend to debug)
>[656438.150523] ata_piix 0000:00:1f.1: PCI INT A disabled
>[656438.252088] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[656438.351014] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[656438.926502] PM: freeze of devices complete after 776.560 msecs
>[656438.927038] PM: late freeze of devices complete after 0.531 msecs
>[656438.927168] ACPI: Preparing to enter system sleep state S4
>[656438.933020] PM: Saving platform NVS memory
>[656438.943260] Disabling non-boot CPUs ...
>[656438.943378] PM: Creating hibernation image:
>[656438.944004] PM: Need to copy 110889 pages
>[656438.944004] PM: Normal pages needed: 100882 + 1024, available pages: 136596
>[656438.944004] PM: Restoring platform NVS memory
>[656438.944004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[656438.944004] CPU0: Thermal monitoring handled by SMI
>[656438.944004] ACPI: Waking up from system sleep state S4
>[656438.982799] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[656438.983158] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[656438.983199] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[656438.983308] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[656438.983317] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[656438.983434] PM: early restore of devices complete after 0.857 msecs
>[656439.016026] i915 0000:00:02.0: setting latency timer to 64
>[656439.016603] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[656439.016646] usb usb3: root hub lost power or was reset
>[656439.016662] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[656439.016702] usb usb4: root hub lost power or was reset
>[656439.016718] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[656439.016736] usb usb1: root hub lost power or was reset
>[656439.020615] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[656439.024381] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[656439.024386] pci 0000:00:1c.0: setting latency timer to 64
>[656439.024395] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[656439.024399] pci 0000:00:1c.4: setting latency timer to 64
>[656439.024407] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[656439.024448] usb usb5: root hub lost power or was reset
>[656439.024460] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[656439.024500] usb usb6: root hub lost power or was reset
>[656439.024511] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[656439.024551] usb usb7: root hub lost power or was reset
>[656439.024564] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[656439.024577] usb usb2: root hub lost power or was reset
>[656439.026019] pci 0000:00:1e.0: setting latency timer to 64
>[656439.026029] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[656439.026034] ata_piix 0000:00:1f.1: setting latency timer to 64
>[656439.026055] ahci 0000:00:1f.2: setting latency timer to 64
>[656439.027340] sd 0:0:0:0: [sda] Starting disk
>[656439.029030] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[656439.029708] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[656439.029715] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[656439.029760] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[656439.034136] r8169 0000:02:00.0: eth0: link down
>[656439.195281] ata4.00: configured for UDMA/33
>[656439.338059] ata2: SATA link down (SStatus 0 SControl 300)
>[656439.351048] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[656439.487032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[656439.488255] ata1.00: configured for UDMA/100
>[656439.567046] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[656439.685068] PM: restore of devices complete after 674.914 msecs
>[656439.692610] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[656439.692615] Restarting tasks ... done.
>[656439.717222] PM: Basic memory bitmaps freed
>[656439.717231] video LNXVIDEO:00: Restoring backlight state
>[656439.956197] usb 5-1: new low speed USB device using uhci_hcd and address 67
>[656440.114072] usb 5-1: New USB device found, idVendor=15d9, idProduct=0a4d
>[656440.114077] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[656440.114080] usb 5-1: Product:  USB OPTICAL MOUSE
>[656440.131136] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input23
>[656440.131285] generic-usb 0003:15D9:0A4D.0006: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
>[656455.732432] usbcore: deregistering interface driver ndiswrapper
>[656455.794300] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[656455.890530] usbcore: registered new interface driver ndiswrapper
>[656456.130271] cfg80211: Calling CRDA to update world regulatory domain
>[656456.431197] cfg80211: World regulatory domain updated:
>[656456.431202]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656456.431205]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656456.431208]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656456.431210]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656456.431213]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656456.431216]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656456.709261] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[656456.712573] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[656456.735889] rtl8187: Customer ID is 0x04
>[656456.735955] Registered led device: rtl8187-phy0::radio
>[656456.735983] Registered led device: rtl8187-phy0::tx
>[656456.736031] Registered led device: rtl8187-phy0::rx
>[656456.740151] rtl8187: wireless switch is on
>[656456.740215] usbcore: registered new interface driver rtl8187
>[656461.186362] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[656465.555385] wlan0: authenticate with 00:20:b0:7f:c2:a9 (try 1)
>[656465.560347] wlan0: authenticated
>[656465.668263] wlan0: associate with 00:20:b0:7f:c2:a9 (try 1)
>[656465.679273] wlan0: RX AssocResp from 00:20:b0:7f:c2:a9 (capab=0x431 status=0 aid=1)
>[656465.679277] wlan0: associated
>[656465.685839] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[656465.685911] cfg80211: Calling CRDA for country: GB
>[656465.694846] cfg80211: Regulatory domain changed to country: GB
>[656465.694849]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656465.694852]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656465.694855]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656465.694857]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656465.694860]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656469.184546] wlan0: deauthenticated from 00:20:b0:7f:c2:a9 (Reason: 2)
>[656469.244321] cfg80211: Calling CRDA to update world regulatory domain
>[656469.250810] cfg80211: World regulatory domain updated:
>[656469.250814]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656469.250983]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656469.250986]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656469.250989]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656469.250991]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656469.250994]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656471.497796] wlan0: authenticate with 00:20:b0:7f:c2:a9 (try 1)
>[656471.500048] wlan0: authenticated
>[656471.604297] wlan0: associate with 00:20:b0:7f:c2:a9 (try 1)
>[656471.615321] wlan0: RX AssocResp from 00:20:b0:7f:c2:a9 (capab=0x431 status=0 aid=1)
>[656471.615324] wlan0: associated
>[656471.621043] cfg80211: Calling CRDA for country: GB
>[656471.627072] cfg80211: Regulatory domain changed to country: GB
>[656471.627076]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656471.627079]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656471.627082]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656471.627084]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656471.627086]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656474.706832] wlan0: deauthenticated from 00:20:b0:7f:c2:a9 (Reason: 2)
>[656474.765358] cfg80211: Calling CRDA to update world regulatory domain
>[656474.770260] cfg80211: World regulatory domain updated:
>[656474.770263]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656474.770266]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656474.770269]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656474.770271]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656474.770274]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656474.770276]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656476.338022] wlan0: no IPv6 routers present
>[656477.031337] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[656477.034402] wlan0: authenticated
>[656477.142337] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[656477.160604] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[656477.160608] wlan0: associated
>[656477.167686] cfg80211: Calling CRDA for country: GB
>[656477.171934] cfg80211: Regulatory domain changed to country: GB
>[656477.171937]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656477.171940]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656477.171943]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656477.171945]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656477.171947]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656487.178396] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[656487.235671] cfg80211: Calling CRDA to update world regulatory domain
>[656487.242270] cfg80211: World regulatory domain updated:
>[656487.242273]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656487.242276]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656487.242279]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656487.242281]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656487.242284]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656487.242286]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656489.236292] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[656489.238536] wlan0: authenticated
>[656489.347293] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[656489.358075] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[656489.358080] wlan0: associated
>[656489.364533] cfg80211: Calling CRDA for country: GB
>[656489.370407] cfg80211: Regulatory domain changed to country: GB
>[656489.370411]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656489.370414]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656489.370417]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656489.370419]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656489.370421]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656499.370477] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[656499.424383] cfg80211: Calling CRDA to update world regulatory domain
>[656499.432114] cfg80211: World regulatory domain updated:
>[656499.432119]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656499.432122]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656499.432125]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656499.432127]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656499.432130]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656499.432132]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656501.417247] wlan0: authenticate with 00:20:b0:7f:c2:a9 (try 1)
>[656501.419489] wlan0: authenticated
>[656501.524247] wlan0: associate with 00:20:b0:7f:c2:a9 (try 1)
>[656501.535041] wlan0: RX AssocResp from 00:20:b0:7f:c2:a9 (capab=0x431 status=0 aid=1)
>[656501.535045] wlan0: associated
>[656501.540939] cfg80211: Calling CRDA for country: GB
>[656501.546585] cfg80211: Regulatory domain changed to country: GB
>[656501.546588]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656501.546591]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656501.546594]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656501.546596]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656501.546599]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656504.641149] wlan0: deauthenticated from 00:20:b0:7f:c2:a9 (Reason: 2)
>[656504.700296] cfg80211: Calling CRDA to update world regulatory domain
>[656504.706341] cfg80211: World regulatory domain updated:
>[656504.706346]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656504.706349]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656504.706352]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656504.706354]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656504.706357]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656504.706360]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656506.955430] wlan0: authenticate with 00:20:b0:7f:c2:a9 (try 1)
>[656506.957775] wlan0: authenticated
>[656507.066306] wlan0: associate with 00:20:b0:7f:c2:a9 (try 1)
>[656507.076951] wlan0: RX AssocResp from 00:20:b0:7f:c2:a9 (capab=0x431 status=0 aid=1)
>[656507.076955] wlan0: associated
>[656507.084423] cfg80211: Calling CRDA for country: GB
>[656507.089562] cfg80211: Regulatory domain changed to country: GB
>[656507.089566]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656507.089569]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656507.089572]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656507.089574]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656507.089576]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656510.799211] wlan0: deauthenticated from 00:20:b0:7f:c2:a9 (Reason: 2)
>[656510.858361] cfg80211: Calling CRDA to update world regulatory domain
>[656510.862884] cfg80211: World regulatory domain updated:
>[656510.862887]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656510.862891]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656510.862893]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656510.862896]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656510.862899]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656510.862901]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656513.114322] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[656513.121191] wlan0: authenticated
>[656513.224323] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[656513.236633] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[656513.236637] wlan0: associated
>[656513.243248] cfg80211: Calling CRDA for country: GB
>[656513.247807] cfg80211: Regulatory domain changed to country: GB
>[656513.247810]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656513.247813]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656513.247816]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656513.247818]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656513.247820]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656514.506580] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[656514.561603] cfg80211: Calling CRDA to update world regulatory domain
>[656514.570160] cfg80211: World regulatory domain updated:
>[656514.570163]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656514.570166]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656514.570169]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656514.570172]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656514.570175]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656514.570177]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656516.721365] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[656516.724463] wlan0: authenticated
>[656516.831109] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[656516.844987] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[656516.844991] wlan0: associated
>[656516.850566] cfg80211: Calling CRDA for country: GB
>[656516.856742] cfg80211: Regulatory domain changed to country: GB
>[656516.856745]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656516.856748]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656516.856751]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656516.856753]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656516.856755]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656526.856036] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[656526.908325] cfg80211: Calling CRDA to update world regulatory domain
>[656526.916189] cfg80211: World regulatory domain updated:
>[656526.916192]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656526.916195]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656526.916198]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656526.916201]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656526.916203]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656526.916206]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656528.895324] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[656528.897543] wlan0: authenticated
>[656529.007440] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[656529.021210] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[656529.021214] wlan0: associated
>[656529.027143] cfg80211: Calling CRDA for country: GB
>[656529.032469] cfg80211: Regulatory domain changed to country: GB
>[656529.032473]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656529.032476]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656529.032479]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656529.032481]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656529.032483]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656539.036739] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[656539.088287] cfg80211: Calling CRDA to update world regulatory domain
>[656539.094155] cfg80211: World regulatory domain updated:
>[656539.094159]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656539.094162]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656539.094164]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656539.094167]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656539.094169]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656539.094172]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656541.068280] wlan0: authenticate with 00:20:b0:7f:c2:a9 (try 1)
>[656541.070498] wlan0: authenticated
>[656541.175277] wlan0: associate with 00:20:b0:7f:c2:a9 (try 1)
>[656541.185895] wlan0: RX AssocResp from 00:20:b0:7f:c2:a9 (capab=0x431 status=0 aid=1)
>[656541.185899] wlan0: associated
>[656541.192584] cfg80211: Calling CRDA for country: GB
>[656541.196676] cfg80211: Regulatory domain changed to country: GB
>[656541.196679]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656541.196682]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656541.196684]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656541.196687]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656541.196689]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656544.281282] wlan0: deauthenticated from 00:20:b0:7f:c2:a9 (Reason: 2)
>[656544.339332] cfg80211: Calling CRDA to update world regulatory domain
>[656544.345130] cfg80211: World regulatory domain updated:
>[656544.345135]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656544.345138]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656544.345141]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656544.345143]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656544.345146]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656544.345148]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656546.592315] wlan0: authenticate with 00:20:b0:7f:c2:a9 (try 1)
>[656546.594535] wlan0: authenticated
>[656546.700313] wlan0: associate with 00:20:b0:7f:c2:a9 (try 1)
>[656546.710957] wlan0: RX AssocResp from 00:20:b0:7f:c2:a9 (capab=0x431 status=0 aid=1)
>[656546.710961] wlan0: associated
>[656546.717040] cfg80211: Calling CRDA for country: GB
>[656546.722290] cfg80211: Regulatory domain changed to country: GB
>[656546.722294]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656546.722297]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656546.722300]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656546.722302]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656546.722305]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656549.942223] wlan0: deauthenticated from 00:20:b0:7f:c2:a9 (Reason: 2)
>[656550.000348] cfg80211: Calling CRDA to update world regulatory domain
>[656550.009109] cfg80211: World regulatory domain updated:
>[656550.009113]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656550.009117]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656550.009119]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656550.009122]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656550.009124]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656550.009127]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656552.248950] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[656552.251198] wlan0: authenticated
>[656552.357352] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[656552.367993] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[656552.367997] wlan0: associated
>[656552.374076] cfg80211: Calling CRDA for country: GB
>[656552.379351] cfg80211: Regulatory domain changed to country: GB
>[656552.379356]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656552.379359]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656552.379361]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656552.379364]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656552.379366]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656562.383883] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[656562.437286] cfg80211: Calling CRDA to update world regulatory domain
>[656562.444653] cfg80211: World regulatory domain updated:
>[656562.444656]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656562.444659]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656562.444662]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656562.444665]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656562.444667]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656562.444670]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656564.417284] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[656564.419526] wlan0: authenticated
>[656564.526305] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[656564.536936] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[656564.536941] wlan0: associated
>[656564.543527] cfg80211: Calling CRDA for country: GB
>[656564.547707] cfg80211: Regulatory domain changed to country: GB
>[656564.547710]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656564.547713]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656564.547715]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656564.547717]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656564.547720]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656566.503171] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[656566.563320] cfg80211: Calling CRDA to update world regulatory domain
>[656566.571746] cfg80211: World regulatory domain updated:
>[656566.571749]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656566.571752]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656566.571755]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656566.571758]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656566.571760]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656566.571763]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656568.726311] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[656568.729678] wlan0: authenticated
>[656568.835334] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[656568.854461] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[656568.854465] wlan0: associated
>[656568.860169] cfg80211: Calling CRDA for country: GB
>[656568.866164] cfg80211: Regulatory domain changed to country: GB
>[656568.866168]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656568.866171]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656568.866174]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656568.866176]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656568.866179]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656578.866499] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[656578.918290] cfg80211: Calling CRDA to update world regulatory domain
>[656578.924637] cfg80211: World regulatory domain updated:
>[656578.924640]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656578.924643]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656578.924646]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656578.924649]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656578.924651]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656578.924654]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656580.898290] wlan0: authenticate with 00:20:b0:7f:c2:a9 (try 1)
>[656580.900508] wlan0: authenticated
>[656581.005788] wlan0: associate with 00:20:b0:7f:c2:a9 (try 1)
>[656581.016430] wlan0: RX AssocResp from 00:20:b0:7f:c2:a9 (capab=0x431 status=0 aid=1)
>[656581.016434] wlan0: associated
>[656581.022488] cfg80211: Calling CRDA for country: GB
>[656581.026873] cfg80211: Regulatory domain changed to country: GB
>[656581.026877]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656581.026880]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656581.026883]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656581.026885]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656581.026887]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656584.115725] wlan0: deauthenticated from 00:20:b0:7f:c2:a9 (Reason: 2)
>[656584.173341] cfg80211: Calling CRDA to update world regulatory domain
>[656584.179127] cfg80211: World regulatory domain updated:
>[656584.179130]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656584.179134]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656584.179137]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656584.179139]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656584.179142]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656584.179144]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656586.422323] wlan0: authenticate with 00:20:b0:7f:c2:a9 (try 1)
>[656586.424542] wlan0: authenticated
>[656586.530301] wlan0: associate with 00:20:b0:7f:c2:a9 (try 1)
>[656586.540970] wlan0: RX AssocResp from 00:20:b0:7f:c2:a9 (capab=0x431 status=0 aid=1)
>[656586.540975] wlan0: associated
>[656586.547653] cfg80211: Calling CRDA for country: GB
>[656586.551794] cfg80211: Regulatory domain changed to country: GB
>[656586.551797]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656586.551800]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656586.551802]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656586.551805]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656586.551807]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656590.012333] wlan0: deauthenticated from 00:20:b0:7f:c2:a9 (Reason: 2)
>[656590.069379] cfg80211: Calling CRDA to update world regulatory domain
>[656590.075172] cfg80211: World regulatory domain updated:
>[656590.075177]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656590.075180]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656590.075183]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656590.075185]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656590.075188]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656590.075190]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656592.323365] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[656592.325583] wlan0: authenticated
>[656592.432363] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[656592.632039] wlan0: associate with 00:20:b0:7f:c3:e1 (try 2)
>[656592.642628] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[656592.642631] wlan0: associated
>[656592.648204] cfg80211: Calling CRDA for country: GB
>[656592.653708] cfg80211: Regulatory domain changed to country: GB
>[656592.653711]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656592.653714]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656592.653716]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656592.653719]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[656592.653721]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[656592.655366] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[656592.711123] cfg80211: Calling CRDA to update world regulatory domain
>[656592.716450] cfg80211: World regulatory domain updated:
>[656592.716453]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[656592.716456]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656592.716459]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656592.716462]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[656592.716464]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[656592.716467]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[657674.344069] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[657895.525692] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[658071.247591] r8169 0000:02:00.0: eth0: link down
>[658071.247811] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[658075.172541] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[658079.273313] wlan0: authenticate with 00:20:b0:7f:c2:a8 (try 1)
>[658079.275557] wlan0: authenticated
>[658079.379313] wlan0: associate with 00:20:b0:7f:c2:a8 (try 1)
>[658079.390342] wlan0: RX AssocResp from 00:20:b0:7f:c2:a8 (capab=0x431 status=0 aid=2)
>[658079.390346] wlan0: associated
>[658079.396025] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[658079.396100] cfg80211: Calling CRDA for country: GB
>[658079.407962] cfg80211: Regulatory domain changed to country: GB
>[658079.407967]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[658079.407970]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[658079.407972]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[658079.407975]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[658079.407977]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[658090.290023] wlan0: no IPv6 routers present
>[666401.892665] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[668112.191085] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[670188.378451] usbcore: deregistering interface driver rtl8187
>[670188.385709] wlan0: deauthenticating from 00:20:b0:7f:c2:a8 by local choice (reason=3)
>[670188.451346] cfg80211: Calling CRDA to update world regulatory domain
>[670188.585040] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[670194.512447] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[670194.512451] PM: Basic memory bitmaps created
>[670195.447261] Syncing filesystems ... done.
>[670195.507433] Freezing user space processes ... (elapsed 0.03 seconds) done.
>[670195.542064] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[670195.555049] PM: Preallocating image memory... done (allocated 140692 pages)
>[670199.745314] PM: Allocated 562768 kbytes in 4.19 seconds (134.31 MB/s)
>[670199.745317] Suspending console(s) (use no_console_suspend to debug)
>[670199.746355] ata_piix 0000:00:1f.1: PCI INT A disabled
>[670199.847114] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[670200.147022] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[670200.147339] PM: freeze of devices complete after 401.803 msecs
>[670200.147891] PM: late freeze of devices complete after 0.548 msecs
>[670200.148049] ACPI: Preparing to enter system sleep state S4
>[670200.155708] PM: Saving platform NVS memory
>[670200.166483] Disabling non-boot CPUs ...
>[670200.166600] PM: Creating hibernation image:
>[670200.167004] PM: Need to copy 114554 pages
>[670200.167004] PM: Normal pages needed: 109125 + 1024, available pages: 137511
>[670200.167004] PM: Restoring platform NVS memory
>[670200.167004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[670200.167004] CPU0: Thermal monitoring handled by SMI
>[670200.167004] ACPI: Waking up from system sleep state S4
>[670200.207217] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[670200.207562] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[670200.207602] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[670200.207712] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[670200.207720] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[670200.207841] PM: early restore of devices complete after 0.860 msecs
>[670200.240024] i915 0000:00:02.0: setting latency timer to 64
>[670200.240617] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[670200.240660] usb usb3: root hub lost power or was reset
>[670200.240676] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[670200.240716] usb usb4: root hub lost power or was reset
>[670200.240733] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[670200.240751] usb usb1: root hub lost power or was reset
>[670200.244636] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[670200.248378] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[670200.248383] pci 0000:00:1c.0: setting latency timer to 64
>[670200.248392] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[670200.248396] pci 0000:00:1c.4: setting latency timer to 64
>[670200.248404] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[670200.248443] usb usb5: root hub lost power or was reset
>[670200.248455] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[670200.248495] usb usb6: root hub lost power or was reset
>[670200.248506] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[670200.248546] usb usb7: root hub lost power or was reset
>[670200.248560] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[670200.248573] usb usb2: root hub lost power or was reset
>[670200.250018] pci 0000:00:1e.0: setting latency timer to 64
>[670200.250030] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[670200.250035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[670200.250055] ahci 0000:00:1f.2: setting latency timer to 64
>[670200.252781] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[670200.252802] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[670200.252808] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[670200.252853] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[670200.258784] r8169 0000:02:00.0: eth0: link down
>[670200.260280] sd 0:0:0:0: [sda] Starting disk
>[670200.419264] ata4.00: configured for UDMA/33
>[670200.558033] ata2: SATA link down (SStatus 0 SControl 300)
>[670200.575031] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[670200.711029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[670200.712270] ata1.00: configured for UDMA/100
>[670200.791051] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[670200.908091] PM: restore of devices complete after 672.944 msecs
>[670200.915704] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[670200.915709] Restarting tasks ... 
>[670200.915836] usb 5-1: USB disconnect, address 67
>[670200.923622] done.
>[670200.929159] PM: Basic memory bitmaps freed
>[670200.929168] video LNXVIDEO:00: Restoring backlight state
>[670240.473693] usbcore: deregistering interface driver ndiswrapper
>[670240.612619] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[670240.731178] usbcore: registered new interface driver ndiswrapper
>[670242.112254] cfg80211: Calling CRDA to update world regulatory domain
>[670243.311926] cfg80211: World regulatory domain updated:
>[670243.311931]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[670243.311934]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[670243.311937]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[670243.311939]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[670243.311942]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[670243.311944]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[670243.581064] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[670243.582816] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[670243.605455] rtl8187: Customer ID is 0x04
>[670243.606307] Registered led device: rtl8187-phy0::radio
>[670243.606871] Registered led device: rtl8187-phy0::tx
>[670243.607611] Registered led device: rtl8187-phy0::rx
>[670243.608319] rtl8187: wireless switch is on
>[670243.608855] usbcore: registered new interface driver rtl8187
>[670249.635611] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[670949.303305] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[671110.799660] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[671490.709755] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[672189.799391] usbcore: deregistering interface driver rtl8187
>[672189.947044] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[672192.643933] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[672192.643937] PM: Basic memory bitmaps created
>[672192.888786] Syncing filesystems ... done.
>[672192.926759] Freezing user space processes ... (elapsed 0.02 seconds) done.
>[672192.950065] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[672192.962889] PM: Preallocating image memory... done (allocated 140692 pages)
>[672195.689240] PM: Allocated 562768 kbytes in 2.72 seconds (206.90 MB/s)
>[672195.689242] Suspending console(s) (use no_console_suspend to debug)
>[672195.690191] ata_piix 0000:00:1f.1: PCI INT A disabled
>[672195.791129] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[672196.091022] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[672196.091845] PM: freeze of devices complete after 402.402 msecs
>[672196.092406] PM: late freeze of devices complete after 0.556 msecs
>[672196.092535] ACPI: Preparing to enter system sleep state S4
>[672196.098417] PM: Saving platform NVS memory
>[672196.109353] Disabling non-boot CPUs ...
>[672196.109471] PM: Creating hibernation image:
>[672196.110005] PM: Need to copy 114637 pages
>[672196.110005] PM: Normal pages needed: 106959 + 1024, available pages: 135179
>[672196.110005] PM: Restoring platform NVS memory
>[672196.110005] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[672196.110005] CPU0: Thermal monitoring handled by SMI
>[672196.110005] ACPI: Waking up from system sleep state S4
>[672196.152144] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[672196.152488] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[672196.152528] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[672196.152637] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[672196.152645] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[672196.152765] PM: early restore of devices complete after 0.852 msecs
>[672196.186025] i915 0000:00:02.0: setting latency timer to 64
>[672196.186656] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[672196.186699] usb usb3: root hub lost power or was reset
>[672196.186715] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[672196.186755] usb usb4: root hub lost power or was reset
>[672196.186772] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[672196.186789] usb usb1: root hub lost power or was reset
>[672196.190662] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[672196.194689] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[672196.194694] pci 0000:00:1c.0: setting latency timer to 64
>[672196.194703] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[672196.194708] pci 0000:00:1c.4: setting latency timer to 64
>[672196.194715] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[672196.194755] usb usb5: root hub lost power or was reset
>[672196.194767] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[672196.194807] usb usb6: root hub lost power or was reset
>[672196.194818] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[672196.194858] usb usb7: root hub lost power or was reset
>[672196.194872] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[672196.194885] usb usb2: root hub lost power or was reset
>[672196.196019] pci 0000:00:1e.0: setting latency timer to 64
>[672196.196030] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[672196.196035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[672196.196055] ahci 0000:00:1f.2: setting latency timer to 64
>[672196.199029] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[672196.199592] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[672196.199599] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[672196.199643] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[672196.204254] r8169 0000:02:00.0: eth0: link down
>[672196.204830] sd 0:0:0:0: [sda] Starting disk
>[672196.365283] ata4.00: configured for UDMA/33
>[672196.507056] ata2: SATA link down (SStatus 0 SControl 300)
>[672196.521052] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[672196.659031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[672196.660254] ata1.00: configured for UDMA/100
>[672196.737047] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[672196.854302] PM: restore of devices complete after 673.895 msecs
>[672196.862602] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[672196.862607] Restarting tasks ... done.
>[672196.875127] PM: Basic memory bitmaps freed
>[672196.875137] video LNXVIDEO:00: Restoring backlight state
>[672197.206035] usb 5-1: new low speed USB device using uhci_hcd and address 68
>[672197.363303] usb 5-1: New USB device found, idVendor=15d9, idProduct=0a4d
>[672197.363307] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[672197.363310] usb 5-1: Product:  USB OPTICAL MOUSE
>[672197.381997] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input24
>[672197.382208] generic-usb 0003:15D9:0A4D.0007: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
>[672197.775906] r8169 0000:02:00.0: eth0: link up
>[672197.776122] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[672208.146020] eth0: no IPv6 routers present
>[672230.671235] usbcore: deregistering interface driver ndiswrapper
>[672230.933146] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[672231.182406] usbcore: registered new interface driver ndiswrapper
>[672232.643647] cfg80211: Calling CRDA to update world regulatory domain
>[672233.651703] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[672233.654624] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[672233.676290] rtl8187: Customer ID is 0x04
>[672233.678797] Registered led device: rtl8187-phy0::radio
>[672233.679700] Registered led device: rtl8187-phy0::tx
>[672233.680414] Registered led device: rtl8187-phy0::rx
>[672233.681159] rtl8187: wireless switch is on
>[672233.682585] usbcore: registered new interface driver rtl8187
>[672234.503725] cfg80211: World regulatory domain updated:
>[672234.503729]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[672234.503732]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[672234.503735]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[672234.503737]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[672234.503740]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[672234.503743]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[672239.219588] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[672348.790045] usb 2-2: new high speed USB device using ehci_hcd and address 115
>[672348.906544] usb 2-2: New USB device found, idVendor=058f, idProduct=6362
>[672348.906548] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[672348.906551] usb 2-2: Product: Mass Storage Device
>[672348.906554] usb 2-2: Manufacturer: Generic
>[672348.906556] usb 2-2: SerialNumber: 058F312D81B
>[672348.910880] scsi24 : usb-storage 2-2:1.0
>[672349.911820] scsi 24:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[672349.912077] sd 24:0:0:0: Attached scsi generic sg2 type 0
>[672349.914406] scsi 24:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[672349.914624] sd 24:0:0:1: Attached scsi generic sg3 type 0
>[672350.475958] scsi 24:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[672350.476220] sd 24:0:0:2: Attached scsi generic sg4 type 0
>[672350.479835] scsi 24:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[672350.480080] sd 24:0:0:3: Attached scsi generic sg5 type 0
>[672350.481239] sd 24:0:0:1: [sdc] Attached SCSI removable disk
>[672350.483439] sd 24:0:0:0: [sdb] 7858176 512-byte logical blocks: (4.02 GB/3.74 GiB)
>[672350.484225] sd 24:0:0:2: [sdd] Attached SCSI removable disk
>[672350.485396] sd 24:0:0:3: [sde] Attached SCSI removable disk
>[672350.486362] sd 24:0:0:0: [sdb] Write Protect is off
>[672350.486368] sd 24:0:0:0: [sdb] Mode Sense: 03 00 00 00
>[672350.486371] sd 24:0:0:0: [sdb] Assuming drive cache: write through
>[672350.490320] sd 24:0:0:0: [sdb] Assuming drive cache: write through
>[672350.493028]  sdb: sdb1
>[672350.495194] sd 24:0:0:0: [sdb] Assuming drive cache: write through
>[672350.495211] sd 24:0:0:0: [sdb] Attached SCSI removable disk
>[672352.519194] FAT: Invalid FSINFO signature: 0x00000000, 0x00000000 (sector = 1)
>[672511.527507] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[672691.808155] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[672853.081189] FAT: Invalid FSINFO signature: 0x00000000, 0x00000000 (sector = 1)
>[673453.169101] FAT: Invalid FSINFO signature: 0x00000000, 0x00000000 (sector = 1)
>[673846.050426] FAT: Invalid FSINFO signature: 0x00000000, 0x00000000 (sector = 1)
>[673849.014183] usb 2-2: USB disconnect, address 115
>[673962.084492] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[674216.973114] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[674341.977620] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[674642.022995] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[674708.923753] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[675221.972827] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[675522.012002] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[676659.519028] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[676702.114043] usb 2-2: new high speed USB device using ehci_hcd and address 116
>[676702.228913] usb 2-2: New USB device found, idVendor=1976, idProduct=6025
>[676702.228917] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[676702.228921] usb 2-2: Product: Flash Disk
>[676702.228923] usb 2-2: Manufacturer: USB 2.0
>[676702.228925] usb 2-2: SerialNumber: 190026021DFFA500
>[676702.230434] scsi25 : usb-storage 2-2:1.0
>[676703.230571] scsi 25:0:0:0: Direct-Access     USB 2.0  Flash Disk       5.00 PQ: 0 ANSI: 2
>[676703.230828] sd 25:0:0:0: Attached scsi generic sg2 type 0
>[676703.232920] sd 25:0:0:0: [sdb] 2009088 512-byte logical blocks: (1.02 GB/981 MiB)
>[676703.234862] sd 25:0:0:0: [sdb] Write Protect is off
>[676703.234867] sd 25:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>[676703.234870] sd 25:0:0:0: [sdb] Assuming drive cache: write through
>[676703.237559] sd 25:0:0:0: [sdb] Assuming drive cache: write through
>[676703.238487]  sdb: sdb1 sdb2
>[676703.240346] sd 25:0:0:0: [sdb] Assuming drive cache: write through
>[676703.240362] sd 25:0:0:0: [sdb] Attached SCSI removable disk
>[676704.543689] ISO 9660 Extensions: Microsoft Joliet Level 3
>[676704.545088] ISO 9660 Extensions: RRIP_1991A
>[676704.683988] kjournald starting.  Commit interval 15 seconds
>[676704.685190] EXT3-fs (sdb2): using internal journal
>[676704.685196] EXT3-fs (sdb2): mounted filesystem with ordered data mode
>[677069.525609] usb 2-2: USB disconnect, address 116
>[677073.697040] usb 2-2: new high speed USB device using ehci_hcd and address 117
>[677073.811966] usb 2-2: New USB device found, idVendor=1976, idProduct=6025
>[677073.811969] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[677073.811972] usb 2-2: Product: Flash Disk
>[677073.811975] usb 2-2: Manufacturer: USB 2.0
>[677073.811977] usb 2-2: SerialNumber: 190026021DFFA500
>[677073.817879] scsi26 : usb-storage 2-2:1.0
>[677074.818606] scsi 26:0:0:0: Direct-Access     USB 2.0  Flash Disk       5.00 PQ: 0 ANSI: 2
>[677074.818852] sd 26:0:0:0: Attached scsi generic sg2 type 0
>[677074.820955] sd 26:0:0:0: [sdb] 2009088 512-byte logical blocks: (1.02 GB/981 MiB)
>[677074.822861] sd 26:0:0:0: [sdb] Write Protect is off
>[677074.822866] sd 26:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>[677074.822870] sd 26:0:0:0: [sdb] Assuming drive cache: write through
>[677074.825461] sd 26:0:0:0: [sdb] Assuming drive cache: write through
>[677074.826399]  sdb: sdb1
>[677074.828197] sd 26:0:0:0: [sdb] Assuming drive cache: write through
>[677074.828213] sd 26:0:0:0: [sdb] Attached SCSI removable disk
>[677373.721649] usb 2-2: USB disconnect, address 117
>[677375.943037] usb 2-2: new high speed USB device using ehci_hcd and address 118
>[677376.057885] usb 2-2: New USB device found, idVendor=1976, idProduct=6025
>[677376.057889] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[677376.057892] usb 2-2: Product: Flash Disk
>[677376.057895] usb 2-2: Manufacturer: USB 2.0
>[677376.057897] usb 2-2: SerialNumber: 190026021DFFA500
>[677376.062173] scsi27 : usb-storage 2-2:1.0
>[677377.062649] scsi 27:0:0:0: Direct-Access     USB 2.0  Flash Disk       5.00 PQ: 0 ANSI: 2
>[677377.062891] sd 27:0:0:0: Attached scsi generic sg2 type 0
>[677377.064962] sd 27:0:0:0: [sdb] 2009088 512-byte logical blocks: (1.02 GB/981 MiB)
>[677377.066447] sd 27:0:0:0: [sdb] Write Protect is off
>[677377.066452] sd 27:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>[677377.066456] sd 27:0:0:0: [sdb] Assuming drive cache: write through
>[677377.069023] sd 27:0:0:0: [sdb] Assuming drive cache: write through
>[677377.069934]  sdb: sdb1
>[677377.071503] sd 27:0:0:0: [sdb] Assuming drive cache: write through
>[677377.071519] sd 27:0:0:0: [sdb] Attached SCSI removable disk
>[677495.429950] usb 2-2: USB disconnect, address 118
>[677498.923038] usb 2-2: new high speed USB device using ehci_hcd and address 119
>[677499.037918] usb 2-2: New USB device found, idVendor=1976, idProduct=6025
>[677499.037922] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[677499.037925] usb 2-2: Product: Flash Disk
>[677499.037927] usb 2-2: Manufacturer: USB 2.0
>[677499.037929] usb 2-2: SerialNumber: 190026021DFFA500
>[677499.042205] scsi28 : usb-storage 2-2:1.0
>[677500.042587] scsi 28:0:0:0: Direct-Access     USB 2.0  Flash Disk       5.00 PQ: 0 ANSI: 2
>[677500.042832] sd 28:0:0:0: Attached scsi generic sg2 type 0
>[677500.046661] sd 28:0:0:0: [sdb] 2009088 512-byte logical blocks: (1.02 GB/981 MiB)
>[677500.047221] sd 28:0:0:0: [sdb] Write Protect is off
>[677500.047225] sd 28:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>[677500.047228] sd 28:0:0:0: [sdb] Assuming drive cache: write through
>[677500.049807] sd 28:0:0:0: [sdb] Assuming drive cache: write through
>[677500.050626]  sdb: sdb1
>[677500.052055] sd 28:0:0:0: [sdb] Assuming drive cache: write through
>[677500.052072] sd 28:0:0:0: [sdb] Attached SCSI removable disk
>[677580.119127] usb 2-2: USB disconnect, address 119
>[677582.396042] usb 2-2: new high speed USB device using ehci_hcd and address 120
>[677582.510863] usb 2-2: New USB device found, idVendor=1976, idProduct=6025
>[677582.510867] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[677582.510870] usb 2-2: Product: Flash Disk
>[677582.510872] usb 2-2: Manufacturer: USB 2.0
>[677582.510874] usb 2-2: SerialNumber: 190026021DFFA500
>[677582.515141] scsi29 : usb-storage 2-2:1.0
>[677583.515503] scsi 29:0:0:0: Direct-Access     USB 2.0  Flash Disk       5.00 PQ: 0 ANSI: 2
>[677583.515747] sd 29:0:0:0: Attached scsi generic sg2 type 0
>[677583.517836] sd 29:0:0:0: [sdb] 2009088 512-byte logical blocks: (1.02 GB/981 MiB)
>[677583.519934] sd 29:0:0:0: [sdb] Write Protect is off
>[677583.519939] sd 29:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>[677583.519942] sd 29:0:0:0: [sdb] Assuming drive cache: write through
>[677583.524361] sd 29:0:0:0: [sdb] Assuming drive cache: write through
>[677583.525638]  sdb: sdb1
>[677583.527227] sd 29:0:0:0: [sdb] Assuming drive cache: write through
>[677583.527243] sd 29:0:0:0: [sdb] Attached SCSI removable disk
>[677824.668664] usb 2-2: USB disconnect, address 120
>[677837.936037] usb 2-2: new high speed USB device using ehci_hcd and address 121
>[677838.052570] usb 2-2: New USB device found, idVendor=058f, idProduct=6387
>[677838.052574] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[677838.052577] usb 2-2: Product: Mass Storage Device
>[677838.052580] usb 2-2: Manufacturer: JetFlash
>[677838.052582] usb 2-2: SerialNumber: WZCPP5AQ
>[677838.057148] scsi30 : usb-storage 2-2:1.0
>[677839.057986] scsi 30:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
>[677839.058241] sd 30:0:0:0: Attached scsi generic sg2 type 0
>[677839.064974] sd 30:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
>[677839.065457] sd 30:0:0:0: [sdb] Write Protect is off
>[677839.065462] sd 30:0:0:0: [sdb] Mode Sense: 03 00 00 00
>[677839.065465] sd 30:0:0:0: [sdb] Assuming drive cache: write through
>[677839.069498] sd 30:0:0:0: [sdb] Assuming drive cache: write through
>[677839.560054]  sdb: sdb1
>[677839.563467] sd 30:0:0:0: [sdb] Assuming drive cache: write through
>[677839.563484] sd 30:0:0:0: [sdb] Attached SCSI removable disk
>[677894.473850] usb 2-2: USB disconnect, address 121
>[677904.205044] usb 2-2: new high speed USB device using ehci_hcd and address 122
>[677904.319877] usb 2-2: New USB device found, idVendor=1976, idProduct=6025
>[677904.319881] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[677904.319884] usb 2-2: Product: Flash Disk
>[677904.319886] usb 2-2: Manufacturer: USB 2.0
>[677904.319888] usb 2-2: SerialNumber: 190026021DFFA500
>[677904.324465] scsi31 : usb-storage 2-2:1.0
>[677905.324511] scsi 31:0:0:0: Direct-Access     USB 2.0  Flash Disk       5.00 PQ: 0 ANSI: 2
>[677905.324756] sd 31:0:0:0: Attached scsi generic sg2 type 0
>[677905.326863] sd 31:0:0:0: [sdb] 2009088 512-byte logical blocks: (1.02 GB/981 MiB)
>[677905.328929] sd 31:0:0:0: [sdb] Write Protect is off
>[677905.328934] sd 31:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>[677905.328937] sd 31:0:0:0: [sdb] Assuming drive cache: write through
>[677905.332997] sd 31:0:0:0: [sdb] Assuming drive cache: write through
>[677905.333928]  sdb: sdb1
>[677905.335880] sd 31:0:0:0: [sdb] Assuming drive cache: write through
>[677905.335921] sd 31:0:0:0: [sdb] Attached SCSI removable disk
>[678004.550273] usb 2-2: USB disconnect, address 122
>[678008.874048] usb 2-2: new high speed USB device using ehci_hcd and address 123
>[678008.988888] usb 2-2: New USB device found, idVendor=1976, idProduct=6025
>[678008.988892] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[678008.988895] usb 2-2: Product: Flash Disk
>[678008.988898] usb 2-2: Manufacturer: USB 2.0
>[678008.988900] usb 2-2: SerialNumber: 190026021DFFA500
>[678008.993575] scsi32 : usb-storage 2-2:1.0
>[678009.993782] scsi 32:0:0:0: Direct-Access     USB 2.0  Flash Disk       5.00 PQ: 0 ANSI: 2
>[678009.994041] sd 32:0:0:0: Attached scsi generic sg2 type 0
>[678009.996122] sd 32:0:0:0: [sdb] 2009088 512-byte logical blocks: (1.02 GB/981 MiB)
>[678009.997460] sd 32:0:0:0: [sdb] Write Protect is off
>[678009.997466] sd 32:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>[678009.997469] sd 32:0:0:0: [sdb] Assuming drive cache: write through
>[678010.000084] sd 32:0:0:0: [sdb] Assuming drive cache: write through
>[678010.000937]  sdb: sdb1
>[678010.002375] sd 32:0:0:0: [sdb] Assuming drive cache: write through
>[678010.002390] sd 32:0:0:0: [sdb] Attached SCSI removable disk
>[678143.417625] usb 2-2: USB disconnect, address 123
>[678146.119027] usb 2-2: new high speed USB device using ehci_hcd and address 124
>[678146.233866] usb 2-2: New USB device found, idVendor=1976, idProduct=6025
>[678146.233870] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[678146.233873] usb 2-2: Product: Flash Disk
>[678146.233875] usb 2-2: Manufacturer: USB 2.0
>[678146.233878] usb 2-2: SerialNumber: 190026021DFFA500
>[678146.238194] scsi33 : usb-storage 2-2:1.0
>[678147.238505] scsi 33:0:0:0: Direct-Access     USB 2.0  Flash Disk       5.00 PQ: 0 ANSI: 2
>[678147.238748] sd 33:0:0:0: Attached scsi generic sg2 type 0
>[678147.242892] sd 33:0:0:0: [sdb] 2009088 512-byte logical blocks: (1.02 GB/981 MiB)
>[678147.244851] sd 33:0:0:0: [sdb] Write Protect is off
>[678147.244856] sd 33:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>[678147.244860] sd 33:0:0:0: [sdb] Assuming drive cache: write through
>[678147.247979] sd 33:0:0:0: [sdb] Assuming drive cache: write through
>[678147.248929]  sdb: sdb1
>[678147.250356] sd 33:0:0:0: [sdb] Assuming drive cache: write through
>[678147.250372] sd 33:0:0:0: [sdb] Attached SCSI removable disk
>[678275.475373] usb 2-2: USB disconnect, address 124
>[678281.465041] usb 2-2: new high speed USB device using ehci_hcd and address 125
>[678281.581503] usb 2-2: New USB device found, idVendor=058f, idProduct=6387
>[678281.581507] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[678281.581510] usb 2-2: Product: Mass Storage Device
>[678281.581512] usb 2-2: Manufacturer: JetFlash
>[678281.581514] usb 2-2: SerialNumber: WZCPP5AQ
>[678281.585819] scsi34 : usb-storage 2-2:1.0
>[678282.587896] scsi 34:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
>[678282.588156] sd 34:0:0:0: Attached scsi generic sg2 type 0
>[678282.593522] sd 34:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
>[678282.594246] sd 34:0:0:0: [sdb] Write Protect is off
>[678282.594251] sd 34:0:0:0: [sdb] Mode Sense: 03 00 00 00
>[678282.594254] sd 34:0:0:0: [sdb] Assuming drive cache: write through
>[678282.597248] sd 34:0:0:0: [sdb] Assuming drive cache: write through
>[678282.943453]  sdb: sdb1
>[678282.947029] sd 34:0:0:0: [sdb] Assuming drive cache: write through
>[678282.947045] sd 34:0:0:0: [sdb] Attached SCSI removable disk
>[678448.223121] usb 2-2: USB disconnect, address 125
>[678458.996055] usb 2-2: new high speed USB device using ehci_hcd and address 126
>[678459.110911] usb 2-2: New USB device found, idVendor=1976, idProduct=6025
>[678459.110915] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[678459.110918] usb 2-2: Product: Flash Disk
>[678459.110921] usb 2-2: Manufacturer: USB 2.0
>[678459.110923] usb 2-2: SerialNumber: 190026021DFFA500
>[678459.115265] scsi35 : usb-storage 2-2:1.0
>[678460.115678] scsi 35:0:0:0: Direct-Access     USB 2.0  Flash Disk       5.00 PQ: 0 ANSI: 2
>[678460.115924] sd 35:0:0:0: Attached scsi generic sg2 type 0
>[678460.118177] sd 35:0:0:0: [sdb] 2009088 512-byte logical blocks: (1.02 GB/981 MiB)
>[678460.120123] sd 35:0:0:0: [sdb] Write Protect is off
>[678460.120128] sd 35:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>[678460.120131] sd 35:0:0:0: [sdb] Assuming drive cache: write through
>[678460.125154] sd 35:0:0:0: [sdb] Assuming drive cache: write through
>[678460.126217]  sdb: sdb1
>[678460.127823] sd 35:0:0:0: [sdb] Assuming drive cache: write through
>[678460.127840] sd 35:0:0:0: [sdb] Attached SCSI removable disk
>[678578.134461] usb 2-2: USB disconnect, address 126
>[679236.972898] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[682527.059986] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[684561.974307] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[686361.996370] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[690809.680606] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[692101.978366] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[699487.044680] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[700542.777882] usbcore: deregistering interface driver rtl8187
>[700542.912043] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[700547.330950] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[700547.330954] PM: Basic memory bitmaps created
>[700548.180612] Syncing filesystems ... done.
>[700548.384409] Freezing user space processes ... (elapsed 0.05 seconds) done.
>[700548.441060] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[700548.454482] PM: Preallocating image memory... done (allocated 140692 pages)
>[700548.807860] PM: Allocated 562768 kbytes in 0.35 seconds (1607.90 MB/s)
>[700548.807863] Suspending console(s) (use no_console_suspend to debug)
>[700548.808867] ata_piix 0000:00:1f.1: PCI INT A disabled
>[700548.910092] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[700549.009017] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[700549.108231] PM: freeze of devices complete after 300.135 msecs
>[700549.108757] PM: late freeze of devices complete after 0.521 msecs
>[700549.108892] ACPI: Preparing to enter system sleep state S4
>[700549.115072] PM: Saving platform NVS memory
>[700549.128265] Disabling non-boot CPUs ...
>[700549.128384] PM: Creating hibernation image:
>[700549.129006] PM: Need to copy 114662 pages
>[700549.129006] PM: Normal pages needed: 104736 + 1024, available pages: 132906
>[700549.129006] PM: Restoring platform NVS memory
>[700549.129006] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[700549.129006] CPU0: Thermal monitoring handled by SMI
>[700549.129006] ACPI: Waking up from system sleep state S4
>[700549.170203] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[700549.170549] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[700549.170589] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[700549.170698] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[700549.170706] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[700549.170827] PM: early restore of devices complete after 0.861 msecs
>[700549.203024] i915 0000:00:02.0: setting latency timer to 64
>[700549.203822] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[700549.203865] usb usb3: root hub lost power or was reset
>[700549.203882] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[700549.203922] usb usb4: root hub lost power or was reset
>[700549.203938] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[700549.203956] usb usb1: root hub lost power or was reset
>[700549.207828] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[700549.210907] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[700549.210912] pci 0000:00:1c.0: setting latency timer to 64
>[700549.210920] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[700549.210925] pci 0000:00:1c.4: setting latency timer to 64
>[700549.210933] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[700549.210973] usb usb5: root hub lost power or was reset
>[700549.210985] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[700549.211025] usb usb6: root hub lost power or was reset
>[700549.211045] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[700549.211085] usb usb7: root hub lost power or was reset
>[700549.211099] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[700549.211112] usb usb2: root hub lost power or was reset
>[700549.212019] pci 0000:00:1e.0: setting latency timer to 64
>[700549.212030] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[700549.212035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[700549.212056] ahci 0000:00:1f.2: setting latency timer to 64
>[700549.215001] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[700549.215043] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[700549.215050] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[700549.215095] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[700549.220311] r8169 0000:02:00.0: eth0: link down
>[700549.220763] sd 0:0:0:0: [sda] Starting disk
>[700549.381280] ata4.00: configured for UDMA/33
>[700549.523055] ata2: SATA link down (SStatus 0 SControl 300)
>[700549.537052] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[700549.673029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[700549.674268] ata1.00: configured for UDMA/100
>[700549.753038] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[700550.119047] usb 5-1: reset low speed USB device using uhci_hcd and address 68
>[700550.415600] PM: restore of devices complete after 1217.406 msecs
>[700550.424789] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[700550.424795] Restarting tasks ... done.
>[700550.450811] PM: Basic memory bitmaps freed
>[700550.450820] video LNXVIDEO:00: Restoring backlight state
>[700552.563329] r8169 0000:02:00.0: eth0: link up
>[700563.016744] usbcore: deregistering interface driver ndiswrapper
>[700563.083399] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[700563.178830] usbcore: registered new interface driver ndiswrapper
>[700563.370774] cfg80211: Calling CRDA to update world regulatory domain
>[700563.938837] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[700563.940797] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[700563.965291] rtl8187: Customer ID is 0x04
>[700563.967359] Registered led device: rtl8187-phy0::radio
>[700563.968207] Registered led device: rtl8187-phy0::tx
>[700563.968763] Registered led device: rtl8187-phy0::rx
>[700563.969649] rtl8187: wireless switch is on
>[700563.970312] usbcore: registered new interface driver rtl8187
>[700564.175062] cfg80211: World regulatory domain updated:
>[700564.175066]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[700564.175070]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[700564.175072]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[700564.175075]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[700564.175078]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[700564.175080]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[700568.672508] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[700728.028660] usbcore: deregistering interface driver rtl8187
>[700728.183047] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[700729.055824] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[700729.055828] PM: Basic memory bitmaps created
>[700729.111242] Syncing filesystems ... done.
>[700729.122222] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[700729.134095] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[700729.147300] PM: Preallocating image memory... done (allocated 140692 pages)
>[700729.395322] PM: Allocated 562768 kbytes in 0.24 seconds (2344.86 MB/s)
>[700729.395324] Suspending console(s) (use no_console_suspend to debug)
>[700729.396163] ata_piix 0000:00:1f.1: PCI INT A disabled
>[700729.396220] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[700730.199022] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[700730.236096] PM: freeze of devices complete after 840.554 msecs
>[700730.236648] PM: late freeze of devices complete after 0.548 msecs
>[700730.236783] ACPI: Preparing to enter system sleep state S4
>[700730.242729] PM: Saving platform NVS memory
>[700730.256503] Disabling non-boot CPUs ...
>[700730.256623] PM: Creating hibernation image:
>[700730.257005] PM: Need to copy 111776 pages
>[700730.257005] PM: Normal pages needed: 102527 + 1024, available pages: 136469
>[700730.257005] PM: Restoring platform NVS memory
>[700730.257005] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[700730.257005] CPU0: Thermal monitoring handled by SMI
>[700730.257005] ACPI: Waking up from system sleep state S4
>[700730.296334] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[700730.296679] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[700730.296720] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[700730.296830] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[700730.296838] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[700730.296960] PM: early restore of devices complete after 0.847 msecs
>[700730.329026] i915 0000:00:02.0: setting latency timer to 64
>[700730.329827] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[700730.329870] usb usb3: root hub lost power or was reset
>[700730.329886] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[700730.329926] usb usb4: root hub lost power or was reset
>[700730.329943] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[700730.329961] usb usb1: root hub lost power or was reset
>[700730.333844] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[700730.337231] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[700730.337236] pci 0000:00:1c.0: setting latency timer to 64
>[700730.337244] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[700730.337249] pci 0000:00:1c.4: setting latency timer to 64
>[700730.337257] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[700730.337297] usb usb5: root hub lost power or was reset
>[700730.337309] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[700730.337349] usb usb6: root hub lost power or was reset
>[700730.337361] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[700730.337401] usb usb7: root hub lost power or was reset
>[700730.337414] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[700730.337427] usb usb2: root hub lost power or was reset
>[700730.339018] pci 0000:00:1e.0: setting latency timer to 64
>[700730.339029] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[700730.339034] ata_piix 0000:00:1f.1: setting latency timer to 64
>[700730.339055] ahci 0000:00:1f.2: setting latency timer to 64
>[700730.340338] sd 0:0:0:0: [sda] Starting disk
>[700730.342030] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[700730.342708] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[700730.342714] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[700730.342760] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[700730.347699] r8169 0000:02:00.0: eth0: link down
>[700730.509279] ata4.00: configured for UDMA/33
>[700730.647055] ata2: SATA link down (SStatus 0 SControl 300)
>[700730.664052] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[700730.800033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[700730.801271] ata1.00: configured for UDMA/100
>[700730.880048] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[700731.246537] usb 5-1: reset low speed USB device using uhci_hcd and address 68
>[700731.544363] PM: restore of devices complete after 1220.470 msecs
>[700731.552345] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[700731.552351] Restarting tasks ... done.
>[700731.583818] PM: Basic memory bitmaps freed
>[700731.583824] video LNXVIDEO:00: Restoring backlight state
>[700749.993324] usbcore: deregistering interface driver ndiswrapper
>[700750.066449] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[700750.140293] usbcore: registered new interface driver ndiswrapper
>[700750.291439] cfg80211: Calling CRDA to update world regulatory domain
>[700750.525361] cfg80211: World regulatory domain updated:
>[700750.525365]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[700750.525369]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[700750.525371]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[700750.525374]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[700750.525377]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[700750.525379]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[700750.885487] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[700750.887508] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[700750.909958] rtl8187: Customer ID is 0x04
>[700750.910037] Registered led device: rtl8187-phy0::radio
>[700750.910067] Registered led device: rtl8187-phy0::tx
>[700750.910094] Registered led device: rtl8187-phy0::rx
>[700750.913333] rtl8187: wireless switch is on
>[700750.913387] usbcore: registered new interface driver rtl8187
>[700755.111620] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[700773.553661] strigidaemon[25992]: segfault at 5a85760a ip b718b803 sp b5910dd0 error 6 in libclucene.so.0.0.0[b7115000+ff000]
>[714410.944603] usbcore: deregistering interface driver rtl8187
>[714411.091045] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[714416.589685] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[714416.589690] PM: Basic memory bitmaps created
>[714416.765778] Syncing filesystems ... done.
>[714417.031056] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[714417.043087] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[714417.055715] PM: Preallocating image memory... done (allocated 140692 pages)
>[714417.382237] PM: Allocated 562768 kbytes in 0.32 seconds (1758.65 MB/s)
>[714417.382239] Suspending console(s) (use no_console_suspend to debug)
>[714417.383244] ata_piix 0000:00:1f.1: PCI INT A disabled
>[714417.383300] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[714417.583016] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[714417.621522] PM: freeze of devices complete after 239.068 msecs
>[714417.622070] PM: late freeze of devices complete after 0.542 msecs
>[714417.622204] ACPI: Preparing to enter system sleep state S4
>[714417.628309] PM: Saving platform NVS memory
>[714417.642638] Disabling non-boot CPUs ...
>[714417.642757] PM: Creating hibernation image:
>[714417.643004] PM: Need to copy 101666 pages
>[714417.643004] PM: Normal pages needed: 91936 + 1024, available pages: 146096
>[714417.643004] PM: Restoring platform NVS memory
>[714417.643004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[714417.643004] CPU0: Thermal monitoring handled by SMI
>[714417.643004] ACPI: Waking up from system sleep state S4
>[714417.681578] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[714417.681922] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[714417.681962] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[714417.682087] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[714417.682096] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[714417.682216] PM: early restore of devices complete after 0.860 msecs
>[714417.715025] i915 0000:00:02.0: setting latency timer to 64
>[714417.715849] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[714417.715892] usb usb3: root hub lost power or was reset
>[714417.715908] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[714417.715948] usb usb4: root hub lost power or was reset
>[714417.715966] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[714417.715983] usb usb1: root hub lost power or was reset
>[714417.719872] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[714417.723188] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[714417.723194] pci 0000:00:1c.0: setting latency timer to 64
>[714417.723202] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[714417.723207] pci 0000:00:1c.4: setting latency timer to 64
>[714417.723214] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[714417.723255] usb usb5: root hub lost power or was reset
>[714417.723267] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[714417.723307] usb usb6: root hub lost power or was reset
>[714417.723318] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[714417.723358] usb usb7: root hub lost power or was reset
>[714417.723372] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[714417.723384] usb usb2: root hub lost power or was reset
>[714417.725019] pci 0000:00:1e.0: setting latency timer to 64
>[714417.725030] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[714417.725035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[714417.725055] ahci 0000:00:1f.2: setting latency timer to 64
>[714417.728030] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[714417.728594] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[714417.728601] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[714417.728646] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[714417.733643] r8169 0000:02:00.0: eth0: link down
>[714417.735133] sd 0:0:0:0: [sda] Starting disk
>[714417.894256] ata4.00: configured for UDMA/33
>[714418.033034] ata2: SATA link down (SStatus 0 SControl 300)
>[714418.050031] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[714418.186029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[714418.187269] ata1.00: configured for UDMA/100
>[714418.266045] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[714418.632030] usb 5-1: reset low speed USB device using uhci_hcd and address 68
>[714418.928822] PM: restore of devices complete after 1218.864 msecs
>[714418.937442] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[714418.937446] Restarting tasks ... done.
>[714418.953311] PM: Basic memory bitmaps freed
>[714418.953321] video LNXVIDEO:00: Restoring backlight state
>[714419.308358] r8169 0000:02:00.0: eth0: link up
>[714426.236168] martian source 255.255.255.255 from 192.168.1.1, on dev eth0
>[714426.236183] ll header: ff:ff:ff:ff:ff:ff:00:19:5b:c0:cd:d1:08:00
>[714439.084049] r8169 0000:02:00.0: eth0: link down
>[714441.827925] usbcore: deregistering interface driver ndiswrapper
>[714441.943813] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[714442.104693] usbcore: registered new interface driver ndiswrapper
>[714442.464135] cfg80211: Calling CRDA to update world regulatory domain
>[714443.079074] cfg80211: World regulatory domain updated:
>[714443.079078]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[714443.079082]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[714443.079084]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[714443.079087]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[714443.079089]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[714443.079092]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[714443.408087] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[714443.410096] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[714443.431605] rtl8187: Customer ID is 0x04
>[714443.436693] Registered led device: rtl8187-phy0::radio
>[714443.437579] Registered led device: rtl8187-phy0::tx
>[714443.438268] Registered led device: rtl8187-phy0::rx
>[714443.438964] rtl8187: wireless switch is on
>[714443.439625] usbcore: registered new interface driver rtl8187
>[714448.393634] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[714496.504291] r8169 0000:02:00.0: eth0: link up
>[714581.627109] r8169 0000:02:00.0: eth0: link down
>[714583.410098] r8169 0000:02:00.0: eth0: link up
>[714608.019730] r8169 0000:02:00.0: eth0: link down
>[714982.896307] r8169 0000:02:00.0: eth0: link up
>[714983.713786] r8169 0000:02:00.0: eth0: link down
>[714991.442198] r8169 0000:02:00.0: eth0: link up
>[714992.535486] r8169 0000:02:00.0: eth0: link down
>[715000.711605] r8169 0000:02:00.0: eth0: link up
>[715006.598158] r8169 0000:02:00.0: eth0: link down
>[715008.187948] r8169 0000:02:00.0: eth0: link up
>[715074.003357] SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:1e:33:43:7d:fa:00:0e:a6:be:4e:87:08:00 SRC=192.168.1.2 DST=192.168.1.4 LEN=48 TOS=0x00 PREC=0x00 TTL=128 ID=60150 DF PROTO=TCP SPT=3066 DPT=22 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405B401010402) 
>[715642.699177] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[715998.233562] r8169 0000:02:00.0: eth0: link down
>[718037.699055] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[718563.665873] usbcore: deregistering interface driver rtl8187
>[718563.818106] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[718564.516947] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[718564.516950] PM: Basic memory bitmaps created
>[718564.572616] Syncing filesystems ... done.
>[718564.582506] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[718564.594090] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[718564.607062] PM: Preallocating image memory... done (allocated 140692 pages)
>[718564.829290] PM: Allocated 562768 kbytes in 0.22 seconds (2558.03 MB/s)
>[718564.829292] Suspending console(s) (use no_console_suspend to debug)
>[718564.830312] ata_piix 0000:00:1f.1: PCI INT A disabled
>[718564.931115] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[718565.432018] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[718565.432795] PM: freeze of devices complete after 603.281 msecs
>[718565.433354] PM: late freeze of devices complete after 0.554 msecs
>[718565.433491] ACPI: Preparing to enter system sleep state S4
>[718565.438475] PM: Saving platform NVS memory
>[718565.448395] Disabling non-boot CPUs ...
>[718565.448512] PM: Creating hibernation image:
>[718565.449004] PM: Need to copy 111866 pages
>[718565.449004] PM: Normal pages needed: 103517 + 1024, available pages: 137279
>[718565.449004] PM: Restoring platform NVS memory
>[718565.449004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[718565.449004] CPU0: Thermal monitoring handled by SMI
>[718565.449004] ACPI: Waking up from system sleep state S4
>[718565.489441] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[718565.489787] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[718565.489827] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[718565.489937] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[718565.489945] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[718565.490081] PM: early restore of devices complete after 0.862 msecs
>[718565.523026] i915 0000:00:02.0: setting latency timer to 64
>[718565.523564] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[718565.523606] usb usb3: root hub lost power or was reset
>[718565.523623] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[718565.523663] usb usb4: root hub lost power or was reset
>[718565.523679] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[718565.523697] usb usb1: root hub lost power or was reset
>[718565.527570] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[718565.530743] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[718565.530748] pci 0000:00:1c.0: setting latency timer to 64
>[718565.530757] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[718565.530761] pci 0000:00:1c.4: setting latency timer to 64
>[718565.530769] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[718565.530809] usb usb5: root hub lost power or was reset
>[718565.530821] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[718565.530861] usb usb6: root hub lost power or was reset
>[718565.530872] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[718565.530913] usb usb7: root hub lost power or was reset
>[718565.530926] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[718565.530939] usb usb2: root hub lost power or was reset
>[718565.532019] pci 0000:00:1e.0: setting latency timer to 64
>[718565.532030] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[718565.532035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[718565.532055] ahci 0000:00:1f.2: setting latency timer to 64
>[718565.535028] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[718565.535590] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[718565.535597] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[718565.535642] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[718565.540242] r8169 0000:02:00.0: eth0: link down
>[718565.540770] sd 0:0:0:0: [sda] Starting disk
>[718565.701280] ata4.00: configured for UDMA/33
>[718565.843055] ata2: SATA link down (SStatus 0 SControl 300)
>[718565.857052] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[718565.993033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[718565.994259] ata1.00: configured for UDMA/100
>[718566.073039] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[718566.439052] usb 5-1: reset low speed USB device using uhci_hcd and address 68
>[718566.735812] PM: restore of devices complete after 1218.496 msecs
>[718566.745046] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[718566.745052] Restarting tasks ... done.
>[718566.771680] PM: Basic memory bitmaps freed
>[718566.771689] video LNXVIDEO:00: Restoring backlight state
>[718567.297797] r8169 0000:02:00.0: eth0: link up
>[718573.050315] martian source 255.255.255.255 from 192.168.1.1, on dev eth0
>[718573.050328] ll header: ff:ff:ff:ff:ff:ff:00:23:54:74:72:36:08:00
>[718577.343472] usbcore: deregistering interface driver ndiswrapper
>[718577.395974] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[718577.465813] usbcore: registered new interface driver ndiswrapper
>[718577.542846] cfg80211: Calling CRDA to update world regulatory domain
>[718577.721589] cfg80211: World regulatory domain updated:
>[718577.721592]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[718577.721595]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[718577.721598]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[718577.721601]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[718577.721603]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[718577.721606]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[718578.200100] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[718578.202087] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[718578.230659] rtl8187: Customer ID is 0x04
>[718578.232686] Registered led device: rtl8187-phy0::radio
>[718578.233530] Registered led device: rtl8187-phy0::tx
>[718578.234246] Registered led device: rtl8187-phy0::rx
>[718578.235113] rtl8187: wireless switch is on
>[718578.235611] usbcore: registered new interface driver rtl8187
>[718584.189586] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[732215.912524] usbcore: deregistering interface driver rtl8187
>[732216.066045] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[732216.839148] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[732216.839152] PM: Basic memory bitmaps created
>[732217.069241] Syncing filesystems ... done.
>[732217.080264] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[732217.092087] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[732217.104896] PM: Preallocating image memory... done (allocated 140692 pages)
>[732217.443243] PM: Allocated 562768 kbytes in 0.33 seconds (1705.35 MB/s)
>[732217.443246] Suspending console(s) (use no_console_suspend to debug)
>[732217.444197] ata_piix 0000:00:1f.1: PCI INT A disabled
>[732217.545107] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[732218.247021] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[732218.395137] PM: freeze of devices complete after 951.689 msecs
>[732218.395687] PM: late freeze of devices complete after 0.545 msecs
>[732218.395818] ACPI: Preparing to enter system sleep state S4
>[732218.401615] PM: Saving platform NVS memory
>[732218.411933] Disabling non-boot CPUs ...
>[732218.412004] PM: Creating hibernation image:
>[732218.412004] PM: Need to copy 114721 pages
>[732218.412004] PM: Normal pages needed: 107296 + 1024, available pages: 135348
>[732218.412004] PM: Restoring platform NVS memory
>[732218.412004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[732218.412004] CPU0: Thermal monitoring handled by SMI
>[732218.412027] ACPI: Waking up from system sleep state S4
>[732218.454046] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[732218.454393] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[732218.454433] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[732218.454543] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[732218.454551] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[732218.454672] PM: early restore of devices complete after 0.863 msecs
>[732218.487025] i915 0000:00:02.0: setting latency timer to 64
>[732218.487595] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[732218.487638] usb usb3: root hub lost power or was reset
>[732218.487654] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[732218.487695] usb usb4: root hub lost power or was reset
>[732218.487711] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[732218.487730] usb usb1: root hub lost power or was reset
>[732218.491626] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[732218.495718] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[732218.495724] pci 0000:00:1c.0: setting latency timer to 64
>[732218.495732] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[732218.495737] pci 0000:00:1c.4: setting latency timer to 64
>[732218.495744] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[732218.495785] usb usb5: root hub lost power or was reset
>[732218.495797] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[732218.495837] usb usb6: root hub lost power or was reset
>[732218.495849] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[732218.495889] usb usb7: root hub lost power or was reset
>[732218.495902] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[732218.495916] usb usb2: root hub lost power or was reset
>[732218.497019] pci 0000:00:1e.0: setting latency timer to 64
>[732218.497030] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[732218.497035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[732218.497056] ahci 0000:00:1f.2: setting latency timer to 64
>[732218.499804] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[732218.499824] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[732218.499830] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[732218.499876] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[732218.506120] r8169 0000:02:00.0: eth0: link down
>[732218.506550] sd 0:0:0:0: [sda] Starting disk
>[732218.666258] ata4.00: configured for UDMA/33
>[732218.809036] ata2: SATA link down (SStatus 0 SControl 300)
>[732218.822030] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[732218.958028] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[732218.959336] ata1.00: configured for UDMA/100
>[732219.038047] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[732219.404030] usb 5-1: reset low speed USB device using uhci_hcd and address 68
>[732219.703261] PM: restore of devices complete after 1220.951 msecs
>[732219.711600] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[732219.711604] Restarting tasks ... done.
>[732219.737460] PM: Basic memory bitmaps freed
>[732219.737470] video LNXVIDEO:00: Restoring backlight state
>[732220.257719] r8169 0000:02:00.0: eth0: link up
>[732236.981776] usbcore: deregistering interface driver ndiswrapper
>[732237.042845] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[732237.183364] usbcore: registered new interface driver ndiswrapper
>[732237.429232] cfg80211: Calling CRDA to update world regulatory domain
>[732238.255369] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[732238.257205] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[732238.279981] cfg80211: World regulatory domain updated:
>[732238.279986]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[732238.279989]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[732238.279992]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[732238.279994]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[732238.279997]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[732238.279999]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[732238.282897] rtl8187: Customer ID is 0x04
>[732238.282964] Registered led device: rtl8187-phy0::radio
>[732238.282992] Registered led device: rtl8187-phy0::tx
>[732238.283288] Registered led device: rtl8187-phy0::rx
>[732238.284577] rtl8187: wireless switch is on
>[732238.284631] usbcore: registered new interface driver rtl8187
>[732243.599525] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[733798.914595] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[735043.675384] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[736516.801466] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[741259.602063] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[744849.673448] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[749793.394544] usbcore: deregistering interface driver rtl8187
>[749793.540048] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[749797.917355] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[749797.917359] PM: Basic memory bitmaps created
>[749798.448458] Syncing filesystems ... done.
>[749798.468563] Freezing user space processes ... (elapsed 0.02 seconds) done.
>[749798.492039] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[749798.505056] PM: Preallocating image memory... done (allocated 140692 pages)
>[749802.352977] PM: Allocated 562768 kbytes in 3.84 seconds (146.55 MB/s)
>[749802.352979] Suspending console(s) (use no_console_suspend to debug)
>[749802.354003] ata_piix 0000:00:1f.1: PCI INT A disabled
>[749802.455105] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[749802.956021] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[749802.984074] PM: freeze of devices complete after 630.858 msecs
>[749802.984629] PM: late freeze of devices complete after 0.550 msecs
>[749802.984764] ACPI: Preparing to enter system sleep state S4
>[749802.990557] PM: Saving platform NVS memory
>[749803.001139] Disabling non-boot CPUs ...
>[749803.001257] PM: Creating hibernation image:
>[749803.002005] PM: Need to copy 114709 pages
>[749803.002005] PM: Normal pages needed: 107921 + 1024, available pages: 135997
>[749803.002005] PM: Restoring platform NVS memory
>[749803.002005] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[749803.002005] CPU0: Thermal monitoring handled by SMI
>[749803.002005] ACPI: Waking up from system sleep state S4
>[749803.041983] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[749803.042342] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[749803.042383] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[749803.042491] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[749803.042499] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[749803.042621] PM: early restore of devices complete after 0.860 msecs
>[749803.075025] i915 0000:00:02.0: setting latency timer to 64
>[749803.075621] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[749803.075663] usb usb3: root hub lost power or was reset
>[749803.075679] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[749803.075719] usb usb4: root hub lost power or was reset
>[749803.075735] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[749803.075753] usb usb1: root hub lost power or was reset
>[749803.079643] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[749803.083561] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[749803.083566] pci 0000:00:1c.0: setting latency timer to 64
>[749803.083574] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[749803.083579] pci 0000:00:1c.4: setting latency timer to 64
>[749803.083587] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[749803.083627] usb usb5: root hub lost power or was reset
>[749803.083639] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[749803.083679] usb usb6: root hub lost power or was reset
>[749803.083691] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[749803.083730] usb usb7: root hub lost power or was reset
>[749803.083744] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[749803.083756] usb usb2: root hub lost power or was reset
>[749803.085018] pci 0000:00:1e.0: setting latency timer to 64
>[749803.085029] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[749803.085035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[749803.085055] ahci 0000:00:1f.2: setting latency timer to 64
>[749803.088028] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[749803.088592] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[749803.088599] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[749803.088644] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[749803.094745] r8169 0000:02:00.0: eth0: link down
>[749803.095482] sd 0:0:0:0: [sda] Starting disk
>[749803.254281] ata4.00: configured for UDMA/33
>[749803.393055] ata2: SATA link down (SStatus 0 SControl 300)
>[749803.410052] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[749803.546030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[749803.547264] ata1.00: configured for UDMA/100
>[749803.626038] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[749803.992028] usb 5-1: reset low speed USB device using uhci_hcd and address 68
>[749804.288817] PM: restore of devices complete after 1218.892 msecs
>[749804.297823] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[749804.297827] Restarting tasks ... done.
>[749804.311693] PM: Basic memory bitmaps freed
>[749804.311703] video LNXVIDEO:00: Restoring backlight state
>[749804.686153] r8169 0000:02:00.0: eth0: link up
>[749836.223189] usbcore: deregistering interface driver ndiswrapper
>[749836.693791] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[749837.001323] usbcore: registered new interface driver ndiswrapper
>[749838.123047] cfg80211: Calling CRDA to update world regulatory domain
>[749839.607602] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[749839.609407] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[749839.630935] rtl8187: Customer ID is 0x04
>[749839.631645] Registered led device: rtl8187-phy0::radio
>[749839.632141] Registered led device: rtl8187-phy0::tx
>[749839.632537] Registered led device: rtl8187-phy0::rx
>[749839.633423] rtl8187: wireless switch is on
>[749839.633758] usbcore: registered new interface driver rtl8187
>[749840.320555] cfg80211: World regulatory domain updated:
>[749840.320560]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[749840.320563]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[749840.320566]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[749840.320569]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[749840.320571]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[749840.320574]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[749845.202542] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[753566.219822] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[758788.682532] scim-launcher[30688]: segfault at 0 ip   (null) sp bf8f57fc error 14 in scim-launcher[8048000+4000]
>[759112.034985] scim-launcher[30852]: segfault at 0 ip   (null) sp bfaa6a4c error 14 in scim-launcher[8048000+4000]
>[759929.420331] scim-launcher[32615]: segfault at 0 ip   (null) sp bff82dcc error 14 in scim-launcher[8048000+4000]
>[759981.979154] scim-launcher[32731]: segfault at 0 ip   (null) sp bfb3968c error 14 in scim-launcher[8048000+4000]
>[760003.872315] scim-launcher[330]: segfault at 0 ip   (null) sp bfe77acc error 14 in scim-launcher[8048000+4000]
>[760084.939661] scim-launcher[485]: segfault at 0 ip   (null) sp bfdaefdc error 14 in scim-launcher[8048000+4000]
>[760197.239893] scim-launcher[558]: segfault at 0 ip   (null) sp bfc5604c error 14 in scim-launcher[8048000+4000]
>[764871.428294] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[765992.238515] usbcore: deregistering interface driver rtl8187
>[765992.399045] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[765995.216500] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[765995.216504] PM: Basic memory bitmaps created
>[765995.791735] Syncing filesystems ... done.
>[765996.049524] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[765996.061097] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[765996.073872] PM: Preallocating image memory... done (allocated 140692 pages)
>[766001.184411] PM: Allocated 562768 kbytes in 5.11 seconds (110.13 MB/s)
>[766001.184414] Suspending console(s) (use no_console_suspend to debug)
>[766001.185464] ata_piix 0000:00:1f.1: PCI INT A disabled
>[766001.286099] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[766001.586022] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[766001.586549] PM: freeze of devices complete after 401.912 msecs
>[766001.587114] PM: late freeze of devices complete after 0.559 msecs
>[766001.587247] ACPI: Preparing to enter system sleep state S4
>[766001.592539] PM: Saving platform NVS memory
>[766001.603365] Disabling non-boot CPUs ...
>[766001.603483] PM: Creating hibernation image:
>[766001.604005] PM: Need to copy 114704 pages
>[766001.604005] PM: Normal pages needed: 107464 + 1024, available pages: 135548
>[766001.604005] PM: Restoring platform NVS memory
>[766001.604005] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[766001.604005] CPU0: Thermal monitoring handled by SMI
>[766001.604005] ACPI: Waking up from system sleep state S4
>[766001.644183] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[766001.644529] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[766001.644570] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[766001.644678] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[766001.644687] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[766001.644808] PM: early restore of devices complete after 0.861 msecs
>[766001.677024] i915 0000:00:02.0: setting latency timer to 64
>[766001.677647] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[766001.677690] usb usb3: root hub lost power or was reset
>[766001.677706] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[766001.677747] usb usb4: root hub lost power or was reset
>[766001.677764] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[766001.677782] usb usb1: root hub lost power or was reset
>[766001.681666] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[766001.685273] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[766001.685279] pci 0000:00:1c.0: setting latency timer to 64
>[766001.685286] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[766001.685291] pci 0000:00:1c.4: setting latency timer to 64
>[766001.685299] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[766001.685339] usb usb5: root hub lost power or was reset
>[766001.685351] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[766001.685390] usb usb6: root hub lost power or was reset
>[766001.685402] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[766001.685443] usb usb7: root hub lost power or was reset
>[766001.685456] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[766001.685469] usb usb2: root hub lost power or was reset
>[766001.687019] pci 0000:00:1e.0: setting latency timer to 64
>[766001.687029] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[766001.687035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[766001.687055] ahci 0000:00:1f.2: setting latency timer to 64
>[766001.690029] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[766001.690593] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[766001.690600] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[766001.690645] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[766001.695727] r8169 0000:02:00.0: eth0: link down
>[766001.696414] sd 0:0:0:0: [sda] Starting disk
>[766001.856274] ata4.00: configured for UDMA/33
>[766001.995052] ata2: SATA link down (SStatus 0 SControl 300)
>[766002.012052] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[766002.148032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[766002.149271] ata1.00: configured for UDMA/100
>[766002.228046] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[766002.594053] usb 5-1: reset low speed USB device using uhci_hcd and address 68
>[766002.889798] PM: restore of devices complete after 1217.398 msecs
>[766002.897483] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[766002.898574] Restarting tasks ... done.
>[766002.911312] PM: Basic memory bitmaps freed
>[766002.911321] video LNXVIDEO:00: Restoring backlight state
>[766003.308359] r8169 0000:02:00.0: eth0: link up
>[766040.966657] usbcore: deregistering interface driver ndiswrapper
>[766041.141268] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[766041.379779] usbcore: registered new interface driver ndiswrapper
>[766041.831206] cfg80211: Calling CRDA to update world regulatory domain
>[766042.543823] cfg80211: World regulatory domain updated:
>[766042.543827]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[766042.543830]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[766042.543833]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[766042.543836]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[766042.543838]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[766042.543841]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[766042.863266] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[766042.865259] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[766042.887632] rtl8187: Customer ID is 0x04
>[766042.888851] Registered led device: rtl8187-phy0::radio
>[766042.889625] Registered led device: rtl8187-phy0::tx
>[766042.890339] Registered led device: rtl8187-phy0::rx
>[766042.891120] rtl8187: wireless switch is on
>[766042.891638] usbcore: registered new interface driver rtl8187
>[766047.785543] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[770601.595191] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[772186.541333] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[773409.376578] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[774691.541470] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[776806.594084] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[778691.579647] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[780047.349949] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[781226.642665] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[783026.664069] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[783196.096659] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[784186.545252] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[785986.573110] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[786582.922499] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[789407.578287] usbcore: deregistering interface driver rtl8187
>[789407.724033] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[789411.712029] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[789411.712033] PM: Basic memory bitmaps created
>[789412.509516] Syncing filesystems ... done.
>[789412.541850] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[789412.554095] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[789412.567718] PM: Preallocating image memory... done (allocated 140692 pages)
>[789415.626682] PM: Allocated 562768 kbytes in 3.05 seconds (184.51 MB/s)
>[789415.626685] Suspending console(s) (use no_console_suspend to debug)
>[789415.627716] ata_piix 0000:00:1f.1: PCI INT A disabled
>[789415.729115] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[789415.828015] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[789415.830310] PM: freeze of devices complete after 203.405 msecs
>[789415.830853] PM: late freeze of devices complete after 0.538 msecs
>[789415.830988] ACPI: Preparing to enter system sleep state S4
>[789415.836405] PM: Saving platform NVS memory
>[789415.847535] Disabling non-boot CPUs ...
>[789415.847653] PM: Creating hibernation image:
>[789415.848005] PM: Need to copy 114631 pages
>[789415.848005] PM: Normal pages needed: 107839 + 1024, available pages: 136070
>[789415.848005] PM: Restoring platform NVS memory
>[789415.848005] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[789415.848005] CPU0: Thermal monitoring handled by SMI
>[789415.848005] ACPI: Waking up from system sleep state S4
>[789415.887674] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[789415.888030] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[789415.888070] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[789415.888180] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[789415.888188] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[789415.888309] PM: early restore of devices complete after 0.858 msecs
>[789415.920025] i915 0000:00:02.0: setting latency timer to 64
>[789415.920650] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[789415.920693] usb usb3: root hub lost power or was reset
>[789415.920709] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[789415.920750] usb usb4: root hub lost power or was reset
>[789415.920766] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[789415.920784] usb usb1: root hub lost power or was reset
>[789415.924684] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[789415.927907] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[789415.927912] pci 0000:00:1c.0: setting latency timer to 64
>[789415.927920] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[789415.927925] pci 0000:00:1c.4: setting latency timer to 64
>[789415.927932] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[789415.927973] usb usb5: root hub lost power or was reset
>[789415.927985] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[789415.928025] usb usb6: root hub lost power or was reset
>[789415.928045] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[789415.928085] usb usb7: root hub lost power or was reset
>[789415.928099] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[789415.928112] usb usb2: root hub lost power or was reset
>[789415.929019] pci 0000:00:1e.0: setting latency timer to 64
>[789415.929030] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[789415.929035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[789415.929057] ahci 0000:00:1f.2: setting latency timer to 64
>[789415.932031] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[789415.932050] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[789415.932057] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[789415.932101] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[789415.937408] r8169 0000:02:00.0: eth0: link down
>[789415.938870] sd 0:0:0:0: [sda] Starting disk
>[789416.098260] ata4.00: configured for UDMA/33
>[789416.237033] ata2: SATA link down (SStatus 0 SControl 300)
>[789416.254031] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[789416.390030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[789416.391355] ata1.00: configured for UDMA/100
>[789416.470037] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[789416.837084] usb 5-1: reset low speed USB device using uhci_hcd and address 68
>[789417.134479] PM: restore of devices complete after 1218.775 msecs
>[789417.144733] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[789417.144738] Restarting tasks ... done.
>[789417.157096] PM: Basic memory bitmaps freed
>[789417.157106] video LNXVIDEO:00: Restoring backlight state
>[789417.521078] r8169 0000:02:00.0: eth0: link up
>[789442.983091] usbcore: deregistering interface driver ndiswrapper
>[789443.232622] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[789443.494709] usbcore: registered new interface driver ndiswrapper
>[789444.189296] cfg80211: Calling CRDA to update world regulatory domain
>[789445.343233] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[789445.345082] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[789445.366674] rtl8187: Customer ID is 0x04
>[789445.367610] Registered led device: rtl8187-phy0::radio
>[789445.368356] Registered led device: rtl8187-phy0::tx
>[789445.368898] Registered led device: rtl8187-phy0::rx
>[789445.369658] rtl8187: wireless switch is on
>[789445.370342] usbcore: registered new interface driver rtl8187
>[789446.191330] cfg80211: World regulatory domain updated:
>[789446.191335]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[789446.191338]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[789446.191341]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[789446.191343]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[789446.191346]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[789446.191348]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[789451.385537] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[791816.077844] usbcore: deregistering interface driver rtl8187
>[791816.223043] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[791821.411737] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[791821.411741] PM: Basic memory bitmaps created
>[791821.723785] Syncing filesystems ... done.
>[791821.761032] Freezing user space processes ... (elapsed 0.03 seconds) done.
>[791821.795063] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[791821.807739] PM: Preallocating image memory... done (allocated 140692 pages)
>[791822.335089] PM: Allocated 562768 kbytes in 0.52 seconds (1082.24 MB/s)
>[791822.335091] Suspending console(s) (use no_console_suspend to debug)
>[791822.336118] ata_piix 0000:00:1f.1: PCI INT A disabled
>[791822.336174] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[791822.938020] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[791823.008330] PM: freeze of devices complete after 673.017 msecs
>[791823.008875] PM: late freeze of devices complete after 0.540 msecs
>[791823.009037] ACPI: Preparing to enter system sleep state S4
>[791823.013953] PM: Saving platform NVS memory
>[791823.025412] Disabling non-boot CPUs ...
>[791823.025535] PM: Creating hibernation image:
>[791823.026004] PM: Need to copy 111687 pages
>[791823.026004] PM: Normal pages needed: 104401 + 1024, available pages: 138521
>[791823.026004] PM: Restoring platform NVS memory
>[791823.026004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[791823.026004] CPU0: Thermal monitoring handled by SMI
>[791823.026004] ACPI: Waking up from system sleep state S4
>[791823.065813] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[791823.066180] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[791823.066221] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[791823.066330] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[791823.066338] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[791823.066459] PM: early restore of devices complete after 0.868 msecs
>[791823.099024] i915 0000:00:02.0: setting latency timer to 64
>[791823.099688] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[791823.099731] usb usb3: root hub lost power or was reset
>[791823.099747] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[791823.099788] usb usb4: root hub lost power or was reset
>[791823.099805] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[791823.099823] usb usb1: root hub lost power or was reset
>[791823.103723] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[791823.107436] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[791823.107442] pci 0000:00:1c.0: setting latency timer to 64
>[791823.107450] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[791823.107455] pci 0000:00:1c.4: setting latency timer to 64
>[791823.107463] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[791823.107503] usb usb5: root hub lost power or was reset
>[791823.107515] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[791823.107556] usb usb6: root hub lost power or was reset
>[791823.107567] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[791823.107608] usb usb7: root hub lost power or was reset
>[791823.107621] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[791823.107635] usb usb2: root hub lost power or was reset
>[791823.109019] pci 0000:00:1e.0: setting latency timer to 64
>[791823.109030] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[791823.109035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[791823.109055] ahci 0000:00:1f.2: setting latency timer to 64
>[791823.112028] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[791823.112601] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[791823.112608] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[791823.112654] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[791823.117689] r8169 0000:02:00.0: eth0: link down
>[791823.118397] sd 0:0:0:0: [sda] Starting disk
>[791823.278282] ata4.00: configured for UDMA/33
>[791823.420055] ata2: SATA link down (SStatus 0 SControl 300)
>[791823.434053] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[791823.570032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[791823.571253] ata1.00: configured for UDMA/100
>[791823.650048] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[791824.016195] usb 5-1: reset low speed USB device using uhci_hcd and address 68
>[791824.311765] PM: restore of devices complete after 1218.524 msecs
>[791824.319752] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[791824.319757] Restarting tasks ... done.
>[791824.345364] PM: Basic memory bitmaps freed
>[791824.345374] video LNXVIDEO:00: Restoring backlight state
>[791824.709371] r8169 0000:02:00.0: eth0: link up
>[791842.716911] usbcore: deregistering interface driver ndiswrapper
>[791842.931962] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[791843.194120] usbcore: registered new interface driver ndiswrapper
>[791843.963753] cfg80211: Calling CRDA to update world regulatory domain
>[791844.769362] cfg80211: World regulatory domain updated:
>[791844.769367]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[791844.769370]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[791844.769373]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[791844.769375]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[791844.769378]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[791844.769381]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[791845.331970] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[791845.333921] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[791845.361872] rtl8187: Customer ID is 0x04
>[791845.364083] Registered led device: rtl8187-phy0::radio
>[791845.365836] Registered led device: rtl8187-phy0::tx
>[791845.367613] Registered led device: rtl8187-phy0::rx
>[791845.368361] rtl8187: wireless switch is on
>[791845.368940] usbcore: registered new interface driver rtl8187
>[791850.794546] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[796105.828951] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[797905.862110] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[798255.076539] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[801847.310089] usb 5-1: USB disconnect, address 68
>[801847.520043] usb 5-1: new low speed USB device using uhci_hcd and address 69
>[801847.676420] usb 5-1: New USB device found, idVendor=15d9, idProduct=0a4d
>[801847.676424] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[801847.676427] usb 5-1: Product:  USB OPTICAL MOUSE
>[801847.695170] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input25
>[801847.695331] generic-usb 0003:15D9:0A4D.0008: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
>[818340.784596] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[820140.808269] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[820567.800409] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[831869.726907] usbcore: deregistering interface driver rtl8187
>[831869.875047] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[831877.348433] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[831877.348437] PM: Basic memory bitmaps created
>[831877.836851] Syncing filesystems ... done.
>[831878.007518] Freezing user space processes ... (elapsed 0.02 seconds) done.
>[831878.031065] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[831878.044236] PM: Preallocating image memory... done (allocated 140692 pages)
>[831884.765240] PM: Allocated 562768 kbytes in 6.72 seconds (83.74 MB/s)
>[831884.765242] Suspending console(s) (use no_console_suspend to debug)
>[831884.766229] ata_piix 0000:00:1f.1: PCI INT A disabled
>[831884.867112] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[831885.167021] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[831885.167345] PM: freeze of devices complete after 401.900 msecs
>[831885.167899] PM: late freeze of devices complete after 0.549 msecs
>[831885.168064] ACPI: Preparing to enter system sleep state S4
>[831885.173085] PM: Saving platform NVS memory
>[831885.185012] Disabling non-boot CPUs ...
>[831885.185134] PM: Creating hibernation image:
>[831885.186004] PM: Need to copy 114519 pages
>[831885.186004] PM: Normal pages needed: 107830 + 1024, available pages: 136286
>[831885.186004] PM: Restoring platform NVS memory
>[831885.186004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[831885.186004] CPU0: Thermal monitoring handled by SMI
>[831885.186004] ACPI: Waking up from system sleep state S4
>[831885.225771] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[831885.226130] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[831885.226170] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[831885.226279] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[831885.226287] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[831885.226409] PM: early restore of devices complete after 0.860 msecs
>[831885.259026] i915 0000:00:02.0: setting latency timer to 64
>[831885.259734] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[831885.259776] usb usb3: root hub lost power or was reset
>[831885.259793] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[831885.259833] usb usb4: root hub lost power or was reset
>[831885.259849] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[831885.259867] usb usb1: root hub lost power or was reset
>[831885.263757] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[831885.267028] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[831885.267034] pci 0000:00:1c.0: setting latency timer to 64
>[831885.267042] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[831885.267046] pci 0000:00:1c.4: setting latency timer to 64
>[831885.267054] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[831885.267094] usb usb5: root hub lost power or was reset
>[831885.267106] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[831885.267146] usb usb6: root hub lost power or was reset
>[831885.267158] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[831885.267198] usb usb7: root hub lost power or was reset
>[831885.267212] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[831885.267224] usb usb2: root hub lost power or was reset
>[831885.269017] pci 0000:00:1e.0: setting latency timer to 64
>[831885.269028] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[831885.269033] ata_piix 0000:00:1f.1: setting latency timer to 64
>[831885.269054] ahci 0000:00:1f.2: setting latency timer to 64
>[831885.272568] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[831885.272585] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[831885.272591] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[831885.272636] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[831885.277878] sd 0:0:0:0: [sda] Starting disk
>[831885.438285] ata4.00: configured for UDMA/33
>[831885.577055] ata2: SATA link down (SStatus 0 SControl 300)
>[831885.594051] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[831885.730033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[831885.731258] ata1.00: configured for UDMA/100
>[831885.810048] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[831886.176069] usb 5-1: reset low speed USB device using uhci_hcd and address 69
>[831886.471576] PM: restore of devices complete after 1217.812 msecs
>[831886.480371] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[831886.480376] Restarting tasks ... done.
>[831886.494043] PM: Basic memory bitmaps freed
>[831886.494053] video LNXVIDEO:00: Restoring backlight state
>[831916.662556] usbcore: deregistering interface driver ndiswrapper
>[831916.719099] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[831916.781542] usbcore: registered new interface driver ndiswrapper
>[831917.353550] cfg80211: Calling CRDA to update world regulatory domain
>[831918.874281] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[831918.875524] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[831918.898699] rtl8187: Customer ID is 0x04
>[831918.899583] Registered led device: rtl8187-phy0::radio
>[831918.900312] Registered led device: rtl8187-phy0::tx
>[831918.900868] Registered led device: rtl8187-phy0::rx
>[831918.901684] rtl8187: wireless switch is on
>[831918.902356] usbcore: registered new interface driver rtl8187
>[831920.306366] r8169 0000:02:00.0: eth0: link up
>[831920.306375] r8169 0000:02:00.0: eth0: link up
>[831920.512597] cfg80211: World regulatory domain updated:
>[831920.512601]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[831920.512605]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[831920.512608]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[831920.512610]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[831920.512613]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[831920.512616]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[831927.903499] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[831930.930019] eth0: no IPv6 routers present
>[833035.633308] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[833737.046610] usbcore: deregistering interface driver rtl8187
>[833737.170045] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[833738.372980] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[833738.372984] PM: Basic memory bitmaps created
>[833738.774684] Syncing filesystems ... done.
>[833738.786350] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[833738.799092] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[833738.812095] PM: Preallocating image memory... done (allocated 140692 pages)
>[833743.491762] PM: Allocated 562768 kbytes in 4.67 seconds (120.50 MB/s)
>[833743.491764] Suspending console(s) (use no_console_suspend to debug)
>[833743.492799] ata_piix 0000:00:1f.1: PCI INT A disabled
>[833743.594111] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[833743.894018] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[833743.894320] PM: freeze of devices complete after 402.334 msecs
>[833743.894874] PM: late freeze of devices complete after 0.549 msecs
>[833743.895039] ACPI: Preparing to enter system sleep state S4
>[833743.901836] PM: Saving platform NVS memory
>[833743.914037] Disabling non-boot CPUs ...
>[833743.914158] PM: Creating hibernation image:
>[833743.915004] PM: Need to copy 114688 pages
>[833743.915004] PM: Normal pages needed: 108474 + 1024, available pages: 136592
>[833743.915004] PM: Restoring platform NVS memory
>[833743.915004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[833743.915004] CPU0: Thermal monitoring handled by SMI
>[833743.915004] ACPI: Waking up from system sleep state S4
>[833743.954816] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[833743.955169] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[833743.955210] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[833743.955318] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[833743.955326] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[833743.955448] PM: early restore of devices complete after 0.854 msecs
>[833743.987025] i915 0000:00:02.0: setting latency timer to 64
>[833743.987747] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[833743.987790] usb usb3: root hub lost power or was reset
>[833743.987806] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[833743.987846] usb usb4: root hub lost power or was reset
>[833743.987862] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[833743.987881] usb usb1: root hub lost power or was reset
>[833743.991765] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[833743.994914] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[833743.994919] pci 0000:00:1c.0: setting latency timer to 64
>[833743.994927] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[833743.994932] pci 0000:00:1c.4: setting latency timer to 64
>[833743.994939] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[833743.994980] usb usb5: root hub lost power or was reset
>[833743.994992] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[833743.995032] usb usb6: root hub lost power or was reset
>[833743.995052] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[833743.995092] usb usb7: root hub lost power or was reset
>[833743.995105] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[833743.995118] usb usb2: root hub lost power or was reset
>[833743.996019] pci 0000:00:1e.0: setting latency timer to 64
>[833743.996030] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[833743.996035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[833743.996056] ahci 0000:00:1f.2: setting latency timer to 64
>[833743.998997] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[833743.999037] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[833743.999043] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[833743.999088] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[833744.006775] sd 0:0:0:0: [sda] Starting disk
>[833744.165256] ata4.00: configured for UDMA/33
>[833744.304032] ata2: SATA link down (SStatus 0 SControl 300)
>[833744.321031] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[833744.457030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[833744.458269] ata1.00: configured for UDMA/100
>[833744.537047] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[833744.903031] usb 5-1: reset low speed USB device using uhci_hcd and address 69
>[833745.199264] PM: restore of devices complete after 1216.353 msecs
>[833745.207439] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[833745.207445] Restarting tasks ... done.
>[833745.227692] PM: Basic memory bitmaps freed
>[833745.227701] video LNXVIDEO:00: Restoring backlight state
>[833766.708766] usbcore: deregistering interface driver ndiswrapper
>[833766.908705] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[833767.071190] usbcore: registered new interface driver ndiswrapper
>[833767.777618] cfg80211: Calling CRDA to update world regulatory domain
>[833768.465985] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[833768.467947] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[833768.489470] rtl8187: Customer ID is 0x04
>[833768.489629] Registered led device: rtl8187-phy0::radio
>[833768.489661] Registered led device: rtl8187-phy0::tx
>[833768.489687] Registered led device: rtl8187-phy0::rx
>[833768.490460] rtl8187: wireless switch is on
>[833768.490505] usbcore: registered new interface driver rtl8187
>[833768.534691] cfg80211: World regulatory domain updated:
>[833768.534695]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[833768.534699]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[833768.534701]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[833768.534704]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[833768.534707]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[833768.534709]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[833768.707518] r8169 0000:02:00.0: eth0: link up
>[833768.707526] r8169 0000:02:00.0: eth0: link up
>[833773.470505] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[833778.834020] eth0: no IPv6 routers present
>[833973.271613] usbcore: deregistering interface driver rtl8187
>[833973.397036] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[833976.888959] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[833976.888963] PM: Basic memory bitmaps created
>[833977.414105] Syncing filesystems ... done.
>[833977.415320] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[833977.427100] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[833977.439714] PM: Preallocating image memory... done (allocated 140692 pages)
>[833979.718545] PM: Allocated 562768 kbytes in 2.27 seconds (247.91 MB/s)
>[833979.718547] Suspending console(s) (use no_console_suspend to debug)
>[833979.719383] ata_piix 0000:00:1f.1: PCI INT A disabled
>[833979.719440] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[833980.321021] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[833980.334218] PM: freeze of devices complete after 615.456 msecs
>[833980.334769] PM: late freeze of devices complete after 0.546 msecs
>[833980.334900] ACPI: Preparing to enter system sleep state S4
>[833980.340462] PM: Saving platform NVS memory
>[833980.352856] Disabling non-boot CPUs ...
>[833980.352978] PM: Creating hibernation image:
>[833980.353004] PM: Need to copy 114752 pages
>[833980.353004] PM: Normal pages needed: 108375 + 1024, available pages: 136365
>[833980.353004] PM: Restoring platform NVS memory
>[833980.353004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[833980.353004] CPU0: Thermal monitoring handled by SMI
>[833980.353004] ACPI: Waking up from system sleep state S4
>[833980.397073] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[833980.397418] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[833980.397459] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[833980.397568] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[833980.397577] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[833980.397697] PM: early restore of devices complete after 0.856 msecs
>[833980.431024] i915 0000:00:02.0: setting latency timer to 64
>[833980.431778] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[833980.431821] usb usb3: root hub lost power or was reset
>[833980.431837] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[833980.431877] usb usb4: root hub lost power or was reset
>[833980.431894] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[833980.431912] usb usb1: root hub lost power or was reset
>[833980.435793] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[833980.439531] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[833980.439537] pci 0000:00:1c.0: setting latency timer to 64
>[833980.439545] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[833980.439550] pci 0000:00:1c.4: setting latency timer to 64
>[833980.439557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[833980.439598] usb usb5: root hub lost power or was reset
>[833980.439610] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[833980.439650] usb usb6: root hub lost power or was reset
>[833980.439661] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[833980.439701] usb usb7: root hub lost power or was reset
>[833980.439715] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[833980.439728] usb usb2: root hub lost power or was reset
>[833980.441019] pci 0000:00:1e.0: setting latency timer to 64
>[833980.441030] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[833980.441035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[833980.441056] ahci 0000:00:1f.2: setting latency timer to 64
>[833980.442341] sd 0:0:0:0: [sda] Starting disk
>[833980.443858] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[833980.443882] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[833980.443889] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[833980.443933] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[833980.610283] ata4.00: configured for UDMA/33
>[833980.752054] ata2: SATA link down (SStatus 0 SControl 300)
>[833980.766053] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[833980.902033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[833980.903313] ata1.00: configured for UDMA/100
>[833980.982043] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[833981.348032] usb 5-1: reset low speed USB device using uhci_hcd and address 69
>[833981.644368] PM: restore of devices complete after 1219.269 msecs
>[833981.652350] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[833981.652355] Restarting tasks ... done.
>[833981.666479] PM: Basic memory bitmaps freed
>[833981.666488] video LNXVIDEO:00: Restoring backlight state
>[834002.696962] usbcore: deregistering interface driver ndiswrapper
>[834002.746827] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[834002.908658] usbcore: registered new interface driver ndiswrapper
>[834003.567777] cfg80211: Calling CRDA to update world regulatory domain
>[834004.238227] cfg80211: World regulatory domain updated:
>[834004.238232]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[834004.238235]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[834004.238238]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[834004.238240]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[834004.238243]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[834004.238245]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[834004.398434] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[834004.400279] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[834004.422059] rtl8187: Customer ID is 0x04
>[834004.422978] Registered led device: rtl8187-phy0::radio
>[834004.423811] Registered led device: rtl8187-phy0::tx
>[834004.424503] Registered led device: rtl8187-phy0::rx
>[834004.425175] rtl8187: wireless switch is on
>[834004.425689] usbcore: registered new interface driver rtl8187
>[834005.176576] r8169 0000:02:00.0: eth0: link up
>[834005.176586] r8169 0000:02:00.0: eth0: link up
>[834009.832603] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[834015.474019] eth0: no IPv6 routers present
>[835785.236259] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[837585.272433] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[837776.620744] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[838435.205225] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[840240.202176] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[842034.885788] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[842785.202332] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[844456.485248] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[846009.044167] usbcore: deregistering interface driver rtl8187
>[846009.176478] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[846010.172515] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[846010.172519] PM: Basic memory bitmaps created
>[846010.325308] Syncing filesystems ... done.
>[846010.336071] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[846010.348096] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[846010.361337] PM: Preallocating image memory... done (allocated 140692 pages)
>[846016.491896] PM: Allocated 562768 kbytes in 6.13 seconds (91.80 MB/s)
>[846016.491898] Suspending console(s) (use no_console_suspend to debug)
>[846016.492917] ata_piix 0000:00:1f.1: PCI INT A disabled
>[846016.594088] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[846016.693014] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[846016.720979] PM: freeze of devices complete after 228.850 msecs
>[846016.721516] PM: late freeze of devices complete after 0.531 msecs
>[846016.721652] ACPI: Preparing to enter system sleep state S4
>[846016.726981] PM: Saving platform NVS memory
>[846016.739789] Disabling non-boot CPUs ...
>[846016.739910] PM: Creating hibernation image:
>[846016.740004] PM: Need to copy 114683 pages
>[846016.740004] PM: Normal pages needed: 108030 + 1024, available pages: 136158
>[846016.740004] PM: Restoring platform NVS memory
>[846016.740004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[846016.740004] CPU0: Thermal monitoring handled by SMI
>[846016.740004] ACPI: Waking up from system sleep state S4
>[846016.781600] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[846016.781944] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[846016.781985] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[846016.782110] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[846016.782119] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[846016.782240] PM: early restore of devices complete after 0.863 msecs
>[846016.815024] i915 0000:00:02.0: setting latency timer to 64
>[846016.815795] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[846016.815838] usb usb3: root hub lost power or was reset
>[846016.815854] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[846016.815895] usb usb4: root hub lost power or was reset
>[846016.815911] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[846016.815929] usb usb1: root hub lost power or was reset
>[846016.819829] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[846016.824493] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[846016.824499] pci 0000:00:1c.0: setting latency timer to 64
>[846016.824508] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[846016.824512] pci 0000:00:1c.4: setting latency timer to 64
>[846016.824520] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[846016.824560] usb usb5: root hub lost power or was reset
>[846016.824572] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[846016.824612] usb usb6: root hub lost power or was reset
>[846016.824624] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[846016.824664] usb usb7: root hub lost power or was reset
>[846016.824677] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[846016.824690] usb usb2: root hub lost power or was reset
>[846016.826020] pci 0000:00:1e.0: setting latency timer to 64
>[846016.826032] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[846016.826037] ata_piix 0000:00:1f.1: setting latency timer to 64
>[846016.826058] ahci 0000:00:1f.2: setting latency timer to 64
>[846016.828838] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[846016.828855] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[846016.828861] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[846016.828906] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[846016.833600] sd 0:0:0:0: [sda] Starting disk
>[846016.995278] ata4.00: configured for UDMA/33
>[846017.136059] ata2: SATA link down (SStatus 0 SControl 300)
>[846017.151052] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[846017.287032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[846017.288346] ata1.00: configured for UDMA/100
>[846017.367034] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[846017.733050] usb 5-1: reset low speed USB device using uhci_hcd and address 69
>[846018.029783] PM: restore of devices complete after 1220.060 msecs
>[846018.038730] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[846018.038735] Restarting tasks ... done.
>[846018.055715] PM: Basic memory bitmaps freed
>[846018.055725] video LNXVIDEO:00: Restoring backlight state
>[846051.305603] usbcore: deregistering interface driver ndiswrapper
>[846051.488708] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[846051.708727] usbcore: registered new interface driver ndiswrapper
>[846052.347531] cfg80211: Calling CRDA to update world regulatory domain
>[846053.070245] cfg80211: World regulatory domain updated:
>[846053.070250]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[846053.070253]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[846053.070256]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[846053.070259]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[846053.070261]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[846053.070263]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[846053.714928] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[846053.716423] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[846053.739125] rtl8187: Customer ID is 0x04
>[846053.741384] Registered led device: rtl8187-phy0::radio
>[846053.743185] Registered led device: rtl8187-phy0::tx
>[846053.744942] Registered led device: rtl8187-phy0::rx
>[846053.745612] rtl8187: wireless switch is on
>[846053.746456] usbcore: registered new interface driver rtl8187
>[846054.012077] r8169 0000:02:00.0: eth0: link up
>[846054.012086] r8169 0000:02:00.0: eth0: link up
>[846059.225568] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[846064.850021] eth0: no IPv6 routers present
>[847147.273265] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[849122.328759] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[850592.263293] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[853492.262569] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[856169.688602] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[857042.259704] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[858742.811663] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[858749.604478] usbcore: deregistering interface driver rtl8187
>[858749.719042] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[858753.616047] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[858753.616050] PM: Basic memory bitmaps created
>[858754.036359] Syncing filesystems ... done.
>[858754.074093] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[858754.086097] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[858754.099299] PM: Preallocating image memory... done (allocated 140692 pages)
>[858760.233765] PM: Allocated 562768 kbytes in 6.13 seconds (91.80 MB/s)
>[858760.233767] Suspending console(s) (use no_console_suspend to debug)
>[858760.234802] ata_piix 0000:00:1f.1: PCI INT A disabled
>[858760.336108] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[858760.636018] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[858760.660498] PM: freeze of devices complete after 426.510 msecs
>[858760.661046] PM: late freeze of devices complete after 0.543 msecs
>[858760.661181] ACPI: Preparing to enter system sleep state S4
>[858760.668082] PM: Saving platform NVS memory
>[858760.677905] Disabling non-boot CPUs ...
>[858760.678004] PM: Creating hibernation image:
>[858760.678004] PM: Need to copy 114837 pages
>[858760.678004] PM: Normal pages needed: 109139 + 1024, available pages: 136957
>[858760.678004] PM: Restoring platform NVS memory
>[858760.678004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[858760.678004] CPU0: Thermal monitoring handled by SMI
>[858760.678004] ACPI: Waking up from system sleep state S4
>[858760.720790] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[858760.721145] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[858760.721185] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[858760.721295] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[858760.721304] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[858760.721424] PM: early restore of devices complete after 0.856 msecs
>[858760.753025] i915 0000:00:02.0: setting latency timer to 64
>[858760.753525] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[858760.753567] usb usb3: root hub lost power or was reset
>[858760.753583] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[858760.753624] usb usb4: root hub lost power or was reset
>[858760.753640] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[858760.753658] usb usb1: root hub lost power or was reset
>[858760.757027] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[858760.757034] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[858760.757079] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[858760.757121] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[858760.757126] pci 0000:00:1c.0: setting latency timer to 64
>[858760.757136] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[858760.757140] pci 0000:00:1c.4: setting latency timer to 64
>[858760.757150] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[858760.757190] usb usb5: root hub lost power or was reset
>[858760.757204] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[858760.757245] usb usb6: root hub lost power or was reset
>[858760.757258] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[858760.757299] usb usb7: root hub lost power or was reset
>[858760.757314] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[858760.757327] usb usb2: root hub lost power or was reset
>[858760.761019] pci 0000:00:1e.0: setting latency timer to 64
>[858760.761035] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[858760.761041] ata_piix 0000:00:1f.1: setting latency timer to 64
>[858760.761288] ahci 0000:00:1f.2: setting latency timer to 64
>[858760.767445] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[858760.767487] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[858760.774978] sd 0:0:0:0: [sda] Starting disk
>[858760.929276] ata4.00: configured for UDMA/33
>[858761.070059] ata2: SATA link down (SStatus 0 SControl 300)
>[858761.091052] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[858761.221035] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[858761.222281] ata1.00: configured for UDMA/100
>[858761.307037] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[858761.673049] usb 5-1: reset low speed USB device using uhci_hcd and address 69
>[858761.968575] PM: restore of devices complete after 1219.739 msecs
>[858761.978301] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[858761.978306] Restarting tasks ... done.
>[858761.990897] PM: Basic memory bitmaps freed
>[858761.990907] video LNXVIDEO:00: Restoring backlight state
>[858789.071383] usbcore: deregistering interface driver ndiswrapper
>[858789.308971] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[858789.604903] usbcore: registered new interface driver ndiswrapper
>[858790.143778] cfg80211: Calling CRDA to update world regulatory domain
>[858791.379466] cfg80211: World regulatory domain updated:
>[858791.379471]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[858791.379474]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[858791.379477]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[858791.379480]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[858791.379482]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[858791.379485]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[858792.058165] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[858792.058748] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[858792.087741] rtl8187: Customer ID is 0x04
>[858792.089810] Registered led device: rtl8187-phy0::radio
>[858792.092597] Registered led device: rtl8187-phy0::tx
>[858792.094411] Registered led device: rtl8187-phy0::rx
>[858792.095172] rtl8187: wireless switch is on
>[858792.095869] usbcore: registered new interface driver rtl8187
>[858792.451186] r8169 0000:02:00.0: eth0: link up
>[858792.451195] r8169 0000:02:00.0: eth0: link up
>[858800.265475] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[858802.722018] eth0: no IPv6 routers present
>[859269.733694] usbcore: deregistering interface driver rtl8187
>[859269.855895] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[859276.015879] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[859276.015883] PM: Basic memory bitmaps created
>[859276.371709] Syncing filesystems ... done.
>[859276.380981] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[859276.393094] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[859276.405705] PM: Preallocating image memory... done (allocated 140692 pages)
>[859282.207887] PM: Allocated 562768 kbytes in 5.80 seconds (97.02 MB/s)
>[859282.207890] Suspending console(s) (use no_console_suspend to debug)
>[859282.208926] ata_piix 0000:00:1f.1: PCI INT A disabled
>[859282.208984] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[859282.409021] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[859282.409305] PM: freeze of devices complete after 201.173 msecs
>[859282.409846] PM: late freeze of devices complete after 0.536 msecs
>[859282.409980] ACPI: Preparing to enter system sleep state S4
>[859282.414965] PM: Saving platform NVS memory
>[859282.425072] Disabling non-boot CPUs ...
>[859282.425189] PM: Creating hibernation image:
>[859282.426004] PM: Need to copy 114869 pages
>[859282.426004] PM: Normal pages needed: 109156 + 1024, available pages: 136910
>[859282.426004] PM: Restoring platform NVS memory
>[859282.426004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[859282.426004] CPU0: Thermal monitoring handled by SMI
>[859282.426004] ACPI: Waking up from system sleep state S4
>[859282.464346] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[859282.464692] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[859282.464732] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[859282.464841] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[859282.464849] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[859282.464970] PM: early restore of devices complete after 0.848 msecs
>[859282.499025] i915 0000:00:02.0: setting latency timer to 64
>[859282.499565] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[859282.499608] usb usb3: root hub lost power or was reset
>[859282.499624] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[859282.499664] usb usb4: root hub lost power or was reset
>[859282.499681] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[859282.499699] usb usb1: root hub lost power or was reset
>[859282.503589] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[859282.506993] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[859282.506998] pci 0000:00:1c.0: setting latency timer to 64
>[859282.507016] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[859282.507021] pci 0000:00:1c.4: setting latency timer to 64
>[859282.507029] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[859282.507069] usb usb5: root hub lost power or was reset
>[859282.507081] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[859282.507121] usb usb6: root hub lost power or was reset
>[859282.507133] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[859282.507173] usb usb7: root hub lost power or was reset
>[859282.507187] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[859282.507200] usb usb2: root hub lost power or was reset
>[859282.509018] pci 0000:00:1e.0: setting latency timer to 64
>[859282.509029] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[859282.509035] ata_piix 0000:00:1f.1: setting latency timer to 64
>[859282.509055] ahci 0000:00:1f.2: setting latency timer to 64
>[859282.511769] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[859282.511786] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[859282.511792] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[859282.511838] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[859282.516819] sd 0:0:0:0: [sda] Starting disk
>[859282.678281] ata4.00: configured for UDMA/33
>[859282.819059] ata2: SATA link down (SStatus 0 SControl 300)
>[859282.834052] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[859282.970032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[859282.971255] ata1.00: configured for UDMA/100
>[859283.050041] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[859283.416054] usb 5-1: reset low speed USB device using uhci_hcd and address 69
>[859283.713393] PM: restore of devices complete after 1220.157 msecs
>[859283.720651] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[859283.720657] Restarting tasks ... done.
>[859283.734445] PM: Basic memory bitmaps freed
>[859283.734454] video LNXVIDEO:00: Restoring backlight state
>[859305.140091] usbcore: deregistering interface driver ndiswrapper
>[859305.188694] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[859305.339611] usbcore: registered new interface driver ndiswrapper
>[859305.712415] cfg80211: Calling CRDA to update world regulatory domain
>[859306.480049] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[859306.482091] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[859306.492448] cfg80211: World regulatory domain updated:
>[859306.492452]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[859306.492456]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[859306.492458]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[859306.492461]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[859306.492464]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[859306.492466]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[859306.507477] rtl8187: Customer ID is 0x04
>[859306.509505] Registered led device: rtl8187-phy0::radio
>[859306.511505] Registered led device: rtl8187-phy0::tx
>[859306.513159] Registered led device: rtl8187-phy0::rx
>[859306.513835] rtl8187: wireless switch is on
>[859306.514658] usbcore: registered new interface driver rtl8187
>[859307.075152] r8169 0000:02:00.0: eth0: link up
>[859307.075161] r8169 0000:02:00.0: eth0: link up
>[859312.096387] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[859317.938021] eth0: no IPv6 routers present
>[860386.816124] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[862186.852886] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[862705.678078] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[865887.738479] lo: Disabled Privacy Extensions
>[872463.308809] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[874228.264905] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[876758.264550] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[884841.247868] usbcore: deregistering interface driver rtl8187
>[884841.357055] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[884849.573563] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[884849.573567] PM: Basic memory bitmaps created
>[884849.914953] Syncing filesystems ... done.
>[884850.428723] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[884850.441095] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[884850.454165] PM: Preallocating image memory... done (allocated 140692 pages)
>[884861.329995] PM: Allocated 562768 kbytes in 10.87 seconds (51.77 MB/s)
>[884861.329998] Suspending console(s) (use no_console_suspend to debug)
>[884861.331049] ata_piix 0000:00:1f.1: PCI INT A disabled
>[884861.432096] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[884861.531019] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[884861.556057] PM: freeze of devices complete after 225.825 msecs
>[884861.556586] PM: late freeze of devices complete after 0.524 msecs
>[884861.556721] ACPI: Preparing to enter system sleep state S4
>[884861.561694] PM: Saving platform NVS memory
>[884861.572388] Disabling non-boot CPUs ...
>[884861.572506] PM: Creating hibernation image:
>[884861.573004] PM: Need to copy 114841 pages
>[884861.573004] PM: Normal pages needed: 108903 + 1024, available pages: 136715
>[884861.573004] PM: Restoring platform NVS memory
>[884861.573004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[884861.573004] CPU0: Thermal monitoring handled by SMI
>[884861.573004] ACPI: Waking up from system sleep state S4
>[884861.613337] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[884861.613681] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[884861.613720] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[884861.613829] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[884861.613837] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[884861.613959] PM: early restore of devices complete after 0.845 msecs
>[884861.646024] i915 0000:00:02.0: setting latency timer to 64
>[884861.646622] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[884861.646664] usb usb3: root hub lost power or was reset
>[884861.646680] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[884861.646721] usb usb4: root hub lost power or was reset
>[884861.646737] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[884861.646755] usb usb1: root hub lost power or was reset
>[884861.650646] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[884861.654215] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[884861.654220] pci 0000:00:1c.0: setting latency timer to 64
>[884861.654228] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[884861.654233] pci 0000:00:1c.4: setting latency timer to 64
>[884861.654241] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[884861.654281] usb usb5: root hub lost power or was reset
>[884861.654293] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[884861.654333] usb usb6: root hub lost power or was reset
>[884861.654344] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[884861.654384] usb usb7: root hub lost power or was reset
>[884861.654398] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[884861.654411] usb usb2: root hub lost power or was reset
>[884861.656019] pci 0000:00:1e.0: setting latency timer to 64
>[884861.656031] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[884861.656036] ata_piix 0000:00:1f.1: setting latency timer to 64
>[884861.656056] ahci 0000:00:1f.2: setting latency timer to 64
>[884861.658769] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[884861.658787] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[884861.658793] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[884861.658838] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[884861.664948] sd 0:0:0:0: [sda] Starting disk
>[884861.825264] ata4.00: configured for UDMA/33
>[884861.966037] ata2: SATA link down (SStatus 0 SControl 300)
>[884861.981031] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[884862.117032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[884862.118257] ata1.00: configured for UDMA/100
>[884862.197039] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[884862.563027] usb 5-1: reset low speed USB device using uhci_hcd and address 69
>[884862.859744] PM: restore of devices complete after 1218.416 msecs
>[884862.868403] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[884862.868408] Restarting tasks ... done.
>[884862.882761] PM: Basic memory bitmaps freed
>[884862.882771] video LNXVIDEO:00: Restoring backlight state
>[884893.546992] usbcore: deregistering interface driver ndiswrapper
>[884893.754089] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[884893.994668] usbcore: registered new interface driver ndiswrapper
>[884894.600994] cfg80211: Calling CRDA to update world regulatory domain
>[884895.246781] cfg80211: World regulatory domain updated:
>[884895.246786]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[884895.246789]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[884895.246792]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[884895.246794]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[884895.246797]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[884895.246799]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[884895.692108] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[884895.693836] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[884895.716287] rtl8187: Customer ID is 0x04
>[884895.716830] Registered led device: rtl8187-phy0::radio
>[884895.717402] Registered led device: rtl8187-phy0::tx
>[884895.717937] Registered led device: rtl8187-phy0::rx
>[884895.718646] rtl8187: wireless switch is on
>[884895.719154] usbcore: registered new interface driver rtl8187
>[884896.285660] r8169 0000:02:00.0: eth0: link up
>[884896.285671] r8169 0000:02:00.0: eth0: link up
>[884903.641588] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[884906.442018] eth0: no IPv6 routers present
>[886864.937922] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
>[887929.400767] usbcore: deregistering interface driver rtl8187
>[887929.525070] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[887931.836411] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>[887931.836415] PM: Basic memory bitmaps created
>[887931.904602] Syncing filesystems ... done.
>[887931.914806] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[887931.927088] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[887931.939794] PM: Preallocating image memory... done (allocated 140692 pages)
>[887932.226766] PM: Allocated 562768 kbytes in 0.28 seconds (2009.88 MB/s)
>[887932.226769] Suspending console(s) (use no_console_suspend to debug)
>[887932.227769] ata_piix 0000:00:1f.1: PCI INT A disabled
>[887932.329098] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[887932.830017] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[887932.830324] PM: freeze of devices complete after 603.339 msecs
>[887932.830850] PM: late freeze of devices complete after 0.521 msecs
>[887932.830985] ACPI: Preparing to enter system sleep state S4
>[887932.836067] PM: Saving platform NVS memory
>[887932.846974] Disabling non-boot CPUs ...
>[887932.847004] PM: Creating hibernation image:
>[887932.847004] PM: Need to copy 110594 pages
>[887932.847004] PM: Normal pages needed: 103015 + 1024, available pages: 139320
>[887932.847004] PM: Restoring platform NVS memory
>[887932.847004] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
>[887932.847004] CPU0: Thermal monitoring handled by SMI
>[887932.847067] ACPI: Waking up from system sleep state S4
>[887932.888845] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[887932.889203] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
>[887932.889242] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
>[887932.889352] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[887932.889360] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[887932.889482] PM: early restore of devices complete after 0.858 msecs
>[887932.922026] i915 0000:00:02.0: setting latency timer to 64
>[887932.922646] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[887932.922689] usb usb3: root hub lost power or was reset
>[887932.922704] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[887932.922744] usb usb4: root hub lost power or was reset
>[887932.922761] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[887932.922779] usb usb1: root hub lost power or was reset
>[887932.926668] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[887932.930842] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[887932.930847] pci 0000:00:1c.0: setting latency timer to 64
>[887932.930855] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[887932.930860] pci 0000:00:1c.4: setting latency timer to 64
>[887932.930868] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[887932.930908] usb usb5: root hub lost power or was reset
>[887932.930921] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[887932.930961] usb usb6: root hub lost power or was reset
>[887932.930972] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[887932.931011] usb usb7: root hub lost power or was reset
>[887932.931035] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[887932.931048] usb usb2: root hub lost power or was reset
>[887932.933018] pci 0000:00:1e.0: setting latency timer to 64
>[887932.933029] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[887932.933034] ata_piix 0000:00:1f.1: setting latency timer to 64
>[887932.933055] ahci 0000:00:1f.2: setting latency timer to 64
>[887932.935838] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[887932.935856] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[887932.935862] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[887932.935907] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[887932.941103] sd 0:0:0:0: [sda] Starting disk
>[887933.102260] ata4.00: configured for UDMA/33
>[887933.242032] ata2: SATA link down (SStatus 0 SControl 300)
>[887933.258030] usb 1-2: reset high speed USB device using ehci_hcd and address 2
>[887933.394033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[887933.395254] ata1.00: configured for UDMA/100
>[887933.474046] usb 2-6: reset high speed USB device using ehci_hcd and address 3
>[887933.840032] usb 5-1: reset low speed USB device using uhci_hcd and address 69
>[887934.135611] PM: restore of devices complete after 1219.514 msecs
>[887934.144112] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
>[887934.144117] Restarting tasks ... done.
>[887934.158795] PM: Basic memory bitmaps freed
>[887934.158805] video LNXVIDEO:00: Restoring backlight state
>[887956.167780] usbcore: deregistering interface driver ndiswrapper
>[887956.305978] ndiswrapper version 1.56 loaded (smp=yes, preempt=yes)
>[887956.424539] usbcore: registered new interface driver ndiswrapper
>[887956.576341] cfg80211: Calling CRDA to update world regulatory domain
>[887957.053402] cfg80211: World regulatory domain updated:
>[887957.053406]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[887957.053409]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[887957.053412]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[887957.053415]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[887957.053417]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[887957.053420]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[887957.302297] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[887957.304089] ieee80211 phy0: hwaddr 00:1b:9e:fc:23:bc, RTL8187BvE V0 + rtl8225z2, rfkill mask 4
>[887957.327423] rtl8187: Customer ID is 0x04
>[887957.329445] Registered led device: rtl8187-phy0::radio
>[887957.331252] Registered led device: rtl8187-phy0::tx
>[887957.333427] Registered led device: rtl8187-phy0::rx
>[887957.335284] rtl8187: wireless switch is on
>[887957.336859] usbcore: registered new interface driver rtl8187
>[887957.525563] r8169 0000:02:00.0: eth0: link down
>[887957.526130] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[887961.848576] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[887966.978354] wlan0: authenticate with 00:20:b0:7f:c2:a9 (try 1)
>[887966.980595] wlan0: authenticated
>[887967.087599] wlan0: associate with 00:20:b0:7f:c2:a9 (try 1)
>[887967.098375] wlan0: RX AssocResp from 00:20:b0:7f:c2:a9 (capab=0x431 status=0 aid=1)
>[887967.098380] wlan0: associated
>[887967.103929] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[887967.104016] cfg80211: Calling CRDA for country: GB
>[887967.110517] cfg80211: Regulatory domain changed to country: GB
>[887967.110521]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[887967.110524]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[887967.110526]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[887967.110528]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[887967.110531]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[887970.290678] wlan0: deauthenticated from 00:20:b0:7f:c2:a9 (Reason: 2)
>[887970.347304] cfg80211: Calling CRDA to update world regulatory domain
>[887970.353169] cfg80211: World regulatory domain updated:
>[887970.353174]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[887970.353177]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[887970.353180]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[887970.353183]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[887970.353185]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[887970.353188]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[887972.594765] wlan0: authenticate with 00:20:b0:7f:c2:a9 (try 1)
>[887972.597010] wlan0: authenticated
>[887972.700265] wlan0: associate with 00:20:b0:7f:c2:a9 (try 1)
>[887972.710914] wlan0: RX AssocResp from 00:20:b0:7f:c2:a9 (capab=0x431 status=0 aid=1)
>[887972.710919] wlan0: associated
>[887972.717675] cfg80211: Calling CRDA for country: GB
>[887972.723693] cfg80211: Regulatory domain changed to country: GB
>[887972.723697]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[887972.723700]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[887972.723703]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[887972.723705]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[887972.723708]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[887974.815794] wlan0: deauthenticated from 00:20:b0:7f:c2:a9 (Reason: 2)
>[887974.874313] cfg80211: Calling CRDA to update world regulatory domain
>[887974.880116] cfg80211: World regulatory domain updated:
>[887974.880121]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[887974.880124]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[887974.880127]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[887974.880129]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[887974.880132]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[887974.880134]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[887977.133293] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[887977.135536] wlan0: authenticated
>[887977.135561] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[887977.146201] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[887977.146205] wlan0: associated
>[887977.152113] cfg80211: Calling CRDA for country: GB
>[887977.157585] cfg80211: Regulatory domain changed to country: GB
>[887977.157589]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[887977.157592]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[887977.157595]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[887977.157597]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[887977.157600]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[887977.938022] wlan0: no IPv6 routers present
>[887990.502622] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[887990.557275] cfg80211: Calling CRDA to update world regulatory domain
>[887990.565616] cfg80211: World regulatory domain updated:
>[887990.565619]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[887990.565622]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[887990.565625]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[887990.565628]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[887990.565630]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[887990.565633]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[887992.737387] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[887992.739630] wlan0: authenticated
>[887992.845263] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[887992.855923] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[887992.855927] wlan0: associated
>[887992.861711] cfg80211: Calling CRDA for country: GB
>[887992.867144] cfg80211: Regulatory domain changed to country: GB
>[887992.867147]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[887992.867150]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[887992.867153]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[887992.867155]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[887992.867158]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[888002.869447] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[888002.921368] cfg80211: Calling CRDA to update world regulatory domain
>[888002.928433] cfg80211: World regulatory domain updated:
>[888002.928437]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888002.928440]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888002.928443]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888002.928446]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888002.928448]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888002.928451]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888004.910337] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[888004.912577] wlan0: authenticated
>[888005.020337] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[888005.031000] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[888005.031014] wlan0: associated
>[888005.036784] cfg80211: Calling CRDA for country: GB
>[888005.041367] cfg80211: Regulatory domain changed to country: GB
>[888005.041370]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888005.041373]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888005.041376]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888005.041378]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888005.041380]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[888016.503124] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[888016.557291] cfg80211: Calling CRDA to update world regulatory domain
>[888016.567495] cfg80211: World regulatory domain updated:
>[888016.567499]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888016.567503]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888016.567505]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888016.567508]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888016.567511]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888016.567513]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888018.730319] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[888018.732053] wlan0: authenticated
>[888018.838299] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[888018.849545] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[888018.849550] wlan0: associated
>[888018.855316] cfg80211: Calling CRDA for country: GB
>[888018.862439] cfg80211: Regulatory domain changed to country: GB
>[888018.862444]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888018.862447]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888018.862450]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888018.862452]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888018.862455]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[888028.865605] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[888028.918404] cfg80211: Calling CRDA to update world regulatory domain
>[888028.925989] cfg80211: World regulatory domain updated:
>[888028.925993]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888028.925996]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888028.925999]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888028.926327]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888028.926330]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888028.926333]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888030.907247] wlan0: authenticate with 00:20:b0:7f:c2:a9 (try 1)
>[888030.909489] wlan0: authenticated
>[888031.014250] wlan0: associate with 00:20:b0:7f:c2:a9 (try 1)
>[888031.032747] wlan0: RX AssocResp from 00:20:b0:7f:c2:a9 (capab=0x431 status=0 aid=1)
>[888031.032752] wlan0: associated
>[888031.038685] cfg80211: Calling CRDA for country: GB
>[888031.042880] cfg80211: Regulatory domain changed to country: GB
>[888031.042883]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888031.042886]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888031.042888]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888031.042891]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888031.042893]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[888034.145640] wlan0: deauthenticated from 00:20:b0:7f:c2:a9 (Reason: 2)
>[888034.204296] cfg80211: Calling CRDA to update world regulatory domain
>[888034.208678] cfg80211: World regulatory domain updated:
>[888034.208682]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888034.208685]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888034.208688]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888034.208691]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888034.208693]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888034.208696]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888036.476281] wlan0: authenticate with 00:20:b0:7f:c2:a9 (try 1)
>[888036.481784] wlan0: authenticated
>[888036.587280] wlan0: associate with 00:20:b0:7f:c2:a9 (try 1)
>[888036.598535] wlan0: RX AssocResp from 00:20:b0:7f:c2:a9 (capab=0x431 status=0 aid=1)
>[888036.598539] wlan0: associated
>[888036.604368] cfg80211: Calling CRDA for country: GB
>[888036.608579] cfg80211: Regulatory domain changed to country: GB
>[888036.608582]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888036.608585]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888036.608588]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888036.608590]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888036.608593]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[888040.258553] wlan0: deauthenticated from 00:20:b0:7f:c2:a9 (Reason: 2)
>[888040.319362] cfg80211: Calling CRDA to update world regulatory domain
>[888040.325537] cfg80211: World regulatory domain updated:
>[888040.325541]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888040.325544]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888040.325546]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888040.325549]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888040.325552]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888040.325554]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888042.574943] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[888042.578573] wlan0: authenticated
>[888042.578602] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[888042.590439] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[888042.590443] wlan0: associated
>[888042.596939] cfg80211: Calling CRDA for country: GB
>[888042.602719] cfg80211: Regulatory domain changed to country: GB
>[888042.602722]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888042.602725]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888042.602728]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888042.602730]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888042.602732]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[888046.213863] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[888046.268371] cfg80211: Calling CRDA to update world regulatory domain
>[888046.272673] cfg80211: World regulatory domain updated:
>[888046.272676]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888046.272680]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888046.272682]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888046.272685]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888046.272688]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888046.272690]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888046.329341] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[888046.331584] wlan0: authenticated
>[888046.437778] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[888046.448381] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[888046.448385] wlan0: associated
>[888046.455026] cfg80211: Calling CRDA for country: GB
>[888046.460149] cfg80211: Regulatory domain changed to country: GB
>[888046.460154]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888046.460157]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888046.460159]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888046.460162]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888046.460164]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[888068.503110] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[888068.560377] cfg80211: Calling CRDA to update world regulatory domain
>[888068.567944] cfg80211: World regulatory domain updated:
>[888068.567947]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888068.567950]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888068.567953]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888068.567956]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888068.567958]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888068.567961]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888070.731091] wlan0: authenticate with 00:20:b0:7f:c3:e1 (try 1)
>[888070.732890] wlan0: authenticated
>[888070.840242] wlan0: associate with 00:20:b0:7f:c3:e1 (try 1)
>[888070.851514] wlan0: RX AssocResp from 00:20:b0:7f:c3:e1 (capab=0x431 status=0 aid=1)
>[888070.851519] wlan0: associated
>[888070.857204] cfg80211: Calling CRDA for country: GB
>[888070.863110] cfg80211: Regulatory domain changed to country: GB
>[888070.863114]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888070.863117]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888070.863120]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888070.863122]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888070.863124]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[888094.502761] wlan0: deauthenticating from 00:20:b0:7f:c3:e1 by local choice (reason=3)
>[888094.561404] cfg80211: Calling CRDA to update world regulatory domain
>[888094.566788] cfg80211: World regulatory domain updated:
>[888094.566792]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888094.566795]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888094.566798]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888094.566800]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[888094.566803]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888094.566805]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[888100.674196] wlan0: authenticate with 00:20:b0:7f:c2:a8 (try 1)
>[888100.675928] wlan0: authenticated
>[888100.781298] wlan0: associate with 00:20:b0:7f:c2:a8 (try 1)
>[888100.793798] wlan0: RX AssocResp from 00:20:b0:7f:c2:a8 (capab=0x431 status=0 aid=6)
>[888100.793802] wlan0: associated
>[888100.799397] cfg80211: Calling CRDA for country: GB
>[888100.806254] cfg80211: Regulatory domain changed to country: GB
>[888100.806258]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[888100.806261]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888100.806264]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888100.806266]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[888100.806268]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[891052.666890] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.

Actions: View

Attachments on bug 682173: 421061 | 426235 | 426236 | 435204