Attachment 660275 Details for Bug 960153

My /etc/sysconfig/network/config file

config (text/plain), 11.34 KB, created by Jan Kara on 2015-12-23 10:05:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jan Kara

Created: 2015-12-23 10:05:49 UTC

Size: 11.34 KB

patch

obsolete

>
>## Type:	yesno
>## Default:	yes
># sometimes we want some script to be executed after an interface has been
># brought up, or before an interface is taken down. 
># default dir is /etc/sysconfig/network/if-up.d for POST_UP and
># /etc/sysconfig/network/if-down.d for PRE_DOWN
>GLOBAL_POST_UP_EXEC="yes"
>GLOBAL_PRE_DOWN_EXEC="yes"
>## Path:	Network/General
>## Description:	Global network configuration
>## Type:        yesno
>## Default:     no
># If ifup should check if an ip address is already in use, set this to yes.
># Make sure that packet sockets (CONFIG_PACKET) are supported in the kernel,
># since this feature uses arping, which depends on that.
># Also be aware that this takes one second per interface; consider that when
># setting up a lot of interfaces. 
>CHECK_DUPLICATE_IP="no"
>
>## Type:        list(auto,yes,no)
>## Default:     auto
># If ifup should send a gratuitous ARP to inform the receivers about its
># static IP addresses and perhaps also a link-layer (MAC) address change.
># Make sure that packet sockets (CONFIG_PACKET) are supported in the kernel,
># since this feature uses arping, which depends on that.
>SEND_GRATUITOUS_ARP="no"
>
>## Type:        yesno
>## Default:     no
># Switch on/off debug messages for all network configuration stuff. If set to no
># most scripts can enable it locally with "-o debug".
>DEBUG="no"
>
># Handling of network connections
># ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
># These features are designed for the convenience of the experienced
># user. If you encounter problems you don't understand then switch
># them off. That is the default.
># Please do not complain if you get troubles. But if you want help to
># make them smarter write to <http://www.suse.de/feedback>.
>
>## Type:	yesno
>## Default:	no
>#
># If you are interested in the connections and nfs mounts that use a
># network interface, you can set CONNECTION_SHOW_WHEN_IFSTATUS="yes".
># Then you will see them with 'ifstatus <interface>' (or 'ifstatus
># <config>')
># This one _should_ never harm ;)
>#
>CONNECTION_SHOW_WHEN_IFSTATUS="no"
>
>## Type:	yesno
>## Default:	no
>#
># If an interface should be set down only if there are no active
># connections, then use CONNECTION_CHECK_BEFORE_IFDOWN="yes"
>#
>CONNECTION_CHECK_BEFORE_IFDOWN="no"
>
>## Type:	yesno
>## Default:	no
>#
># If these connetions (without the nfs mounts) should be closed when
># shutting down an interface, set CONNECTION_CLOSE_BEFORE_IFDOWN="yes".
># WARNING: Be aware that this may terminate applications which need
># one of these connections!
>#
>CONNECTION_CLOSE_BEFORE_IFDOWN="no"
>
>## Type:	yesno
>## Default:	no
>#
># If you are a mobile laptop user and like even nfs mounts to be
># closed when you leave your current workplace, then set
># CONNECTION_UMOUNT_NFS_BEFORE_IFDOWN="yes". This does only work
># if CONNECTION_CLOSE_BEFORE_IFDOWN="yes", too.
># WARNING: Be aware that this may terminate applications which use
># these nfs mounts as working directory. Be very carefull if your home
># is mounted via nfs!!!
># WARNING: This may even lead to hanging ifdown processes if there are
># processes that could not be terminated. If you are using
># hotpluggable devices (pcmcia, usb, firewire), first shut them down
># before unplugging!
>#
>CONNECTION_UMOUNT_NFS_BEFORE_IFDOWN="no"
>
>## Type:	yesno
>## Default:	no
>#
># If terminating processes that use a connection or nfs mount is not
># enough, then they can be killed after an unsuccesfull termination.
># If you want that set CONNECTION_SEND_KILL_SIGNAL="yes"
>#
>CONNECTION_SEND_KILL_SIGNAL="no"
>
>## Type:	integer
>## Default:	30
>#
># Some interfaces need some time to come up or come asynchronously via hotplug.
># WAIT_FOR_INTERFACES is a global wait for all mandatory interfaces in
># seconds. If empty no wait occurs.
>#
>WAIT_FOR_INTERFACES="30"
>
>## Type:        integer
>## Default:     0
>#
># The number of seconds to wait for link to become useable / ready.
># Default is 0, causing to not wait for a ready link (0), because link
># detection can't be enabled in all cases (e.g. bridges without ports).
># Please use per interface settings to enable it.
>#
>LINK_READY_WAIT="0"
>
>## Type:        integer
>## Default:     ""
>#
># The number of seconds to wait for the end of IPv6 duplicate address
># detection in ifup.
># Default is to use WAIT_FOR_INTERFACES/2 seconds in normal ifup runs.
># When ifup is called by /etc/init.d/network at boot time, the check
># is done, but /etc/init.d/network waits WAIT_FOR_INTERFACES seconds
># for all interfaces togerther. Set to 0 to disable it.
>#
>IPV6_DAD_WAIT=""
>
>## Type:	yesno
>## Default:	yes
>#
># With this variable you can determine if the SuSEfirewall when enabled
># should get started when network interfaces are started.
>FIREWALL="yes"
>
>## Type:	int
>## Default:	30
>#
># When using NetworkManager you may define a timeout to wait for NetworkManager
># to connect in /etc/init.d/network(-remotefs) script.  Other network services
># may require the system to have a valid network setup in order to succeed.
># 
># This variable has no effect if NetworkManager is disabled.
>#
>NM_ONLINE_TIMEOUT="0"
>
>## Type:        string
>## Default:     "dns-resolver dns-bind ntp-runtime nis"
>#
># This variable defines the start order of netconfig modules installed
># in the /etc/netconfig.d/ directory.
>#
># To disable the execution of a module, don't remove it from the list
># but prepend it with a minus sign, "-ntp-runtime".
>#
>NETCONFIG_MODULES_ORDER="dns-resolver dns-bind dns-dnsmasq nis ntp-runtime"
>
>## Type:        string
>## Default:     "auto"
>#
># Defines the DNS merge policy as documented in netconfig(8) manual page.
># Set to "" to disable DNS configuration.
>#
>NETCONFIG_DNS_POLICY="auto"
>
>## Type:        string(resolver,bind,dnsmasq,)
>## Default:     "resolver"
>#
># Defines the name of the DNS forwarder that has to be configured.
># Currently implemented are "bind", "dnsmasq" and "resolver", that
># causes to write the name server IP addresses to /etc/resolv.conf
># only (no forwarder). Empty string defaults to "resolver".
>#
>NETCONFIG_DNS_FORWARDER="dnsmasq"
>
>## Type:        yesno
>## Default:     yes
>#
># When enabled (default) in forwarder mode ("bind", "dnsmasq"),
># netconfig writes an explicit localhost nameserver address to the
># /etc/resolv.conf, followed by the policy resolved name server list
># as fallback for the moments, when the local forwarder is stopped.
>#
>NETCONFIG_DNS_FORWARDER_FALLBACK="yes"
>
>## Type:        string
>## Default:     ""
>#
># List of DNS domain names used for host-name lookup.
># It is written as search list into the /etc/resolv.conf file.
>#
>NETCONFIG_DNS_STATIC_SEARCHLIST="suse.cz suse.de"
>
>## Type:        string
>## Default:     ""
>#
># List of DNS nameserver IP addresses to use for host-name lookup.
># When the NETCONFIG_DNS_FORWARDER variable is set to "resolver",
># the name servers are written directly to /etc/resolv.conf.
># Otherwise, the nameserver are written into a forwarder specific
># configuration file and the /etc/resolv.conf does not contain any
># nameservers causing the glibc to use the name server on the local
># machine (the forwarder). See also netconfig(8) manual page.
>#
>NETCONFIG_DNS_STATIC_SERVERS=""
>
>## Type:        string
>## Default:     "auto"
>#
># Allows to specify a custom DNS service ranking list, that is which
># services provide preferred (e.g. vpn services), and which services
># fallback settings (e.g. avahi).
># Preferred service names have to be prepended with a "+", fallback
># service names with a "-" character. The special default value
># "auto" enables the current build-in service ranking list -- see the
># netconfig(8) manual page -- "none" or "" disables the ranking.
>#
>NETCONFIG_DNS_RANKING="auto"
>
>## Type:        string
>## Default:     "auto"
>#
># Defines the NTP merge policy as documented in netconfig(8) manual page.
># Set to "" to disable NTP configuration.
>#
>NETCONFIG_NTP_POLICY="auto"
>
>## Type:        string
>## Default:     ""
>#
># List of NTP servers.
>#
>NETCONFIG_NTP_STATIC_SERVERS=""
>
>## Type:        string
>## Default:     "auto"
>#
># Defines the NIS merge policy as documented in netconfig(8) manual page.
># Set to "" to disable NIS configuration.
>#
>NETCONFIG_NIS_POLICY="auto"
>
>## Type:        string(yes,no,)
>## Default:     "yes"
>#
># Defines whether to set the default NIS domain. When enabled and no domain
># is provided dynamically or in static settings, /etc/defaultdomain is used.
># Valid values are:
>#  - "no" or ""         netconfig does not set the domainname
>#  - "yes"              netconfig sets the domainname according to the
>#                       NIS policy using settings provided by the first
>#                       iterface and service that provided it.
>#  - "<interface name>" as yes, but only using settings from interface.
>#
>NETCONFIG_NIS_SETDOMAINNAME="yes"
>
>## Type:        string
>## Default:     ""
>#
># Defines a default NIS domain.
>#
># Further domain can be specified by adding a "_<number>" suffix to
># the NETCONFIG_NIS_STATIC_DOMAIN and NETCONFIG_NIS_STATIC_SERVERS
># variables, e.g.: NETCONFIG_NIS_STATIC_DOMAIN_1="second".
>#
>NETCONFIG_NIS_STATIC_DOMAIN=""
>
>## Type:        string
>## Default:     ""
>#
># Defines a list of NIS servers for the default NIS domain or the
># domain specified with same "_<number>" suffix.
>#
>NETCONFIG_NIS_STATIC_SERVERS=""
>
>## Type:	string
>## Default:	''
>#
># Set this variable global variable to the ISO / IEC 3166 alpha2
># country code specifying the wireless regulatory domain to set.
># When not empty, ifup-wireless will be set in the wpa_supplicant
># config or via 'iw reg set' command.
>#
># Note: This option requires a wpa driver supporting it, like
># the 'nl80211' driver used by default since openSUSE 11.3.
># When you notice problems with your hardware, please file a
># bug report and set e.g. WIRELESS_WPA_DRIVER='wext' (the old
># default driver) in the ifcfg file.
># See also "/usr/sbin/wpa_supplicant --help" for the list of
># available wpa drivers.
>#
>WIRELESS_REGULATORY_DOMAIN=''
>
>## Type:        string
>## Default:     ""
>#
># Allows to specify options to use when writting the /etc/resolv.conf,
># for example:
># 	"debug attempts:1 timeout:10"
># See resolv.conf(5) manual page for details.
>#
>NETCONFIG_DNS_RESOLVER_OPTIONS=""
>
>## Type:        string
>## Default:     ""
>#
># Allows to specify a sortlist to use when writting the /etc/resolv.conf,
># for example:
># 	130.155.160.0/255.255.240.0 130.155.0.0"
># See resolv.conf(5) manual page for details.
>#
>NETCONFIG_DNS_RESOLVER_SORTLIST=""
>
>## Type:        yesno
>## Default:     no
>#
># Enable netconfig verbose reporting.
>#
>NETCONFIG_VERBOSE="no"
>
>## Type:	yesno
>## Default:	no
>#
># This variable enables netconfig to always force a replace of modified
># files and automatically enables the -f | --force-replace parameter.
>#
># The purpose is to use it as workaround, when some other tool trashes
># the files, e.g. /etc/resolv.conf and you observe messages like this
># in your logs on in "netconfig update" output:
># ATTENTION: You have modified /etc/resolv.conf. Leaving it untouched.
>#
># Please do not forget to also report a bug as we have a system policy
># to use netconfig.
>#
>NETCONFIG_FORCE_REPLACE="no"
>## Type:        string
>## Default:     ""
>#
># Allows to specify a comma separated list of debug facilities used
># by wicked. Negated facility names can be prepended by a "-", e.g.:
>#   "all,-events,-socket,-objectmodel,xpath,xml,dbus"
>#
># When set, wicked debug level is automatically enabled.
># For a complete list of facility names, see: "wicked --debug help".
>#
>WICKED_DEBUG=""
>
>## Type:        list("",error,warning,notice,info,debug,debug1,debug2,debug3)
>## Default:     ""
>#
># Allows to specify wicked debug level. Default level is "notice".
>#
>WICKED_LOG_LEVEL=""

Actions: View

Attachments on bug 960153: 660275 | 710597 | 711392 | 711393 | 714724