Attachment 743359 Details for Bug 1054473

serial log with systemd.log_level=debug

screenlog.bremer (text/plain), 225.77 KB, created by Martin Wilck on 2017-10-06 12:24:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Martin Wilck

Created: 2017-10-06 12:24:33 UTC

Size: 225.77 KB

patch

obsolete

>[    0.000000] Linux version 4.11.8-2-default (geeko@buildhost) (gcc version 7.1.1 20170629 [gcc-7-branch revision 249772] (SUSE Linux) ) #1 SMP PREEMPT Thu Jun 29 14:37:33 UTC 2017 (42bd7a0)
>[    0.000000] Command line: root=UUID=3cf1d9fb-f2dd-4ffe-944b-8d5b353d1daa   console=tty0 console=ttyS1,57600 sysrq_always_enabled panic=100 ignore_loglevel unknown_nmi_panic resume=/dev/disk/by-uuid/dea1a983-484e-4c91-accd-97e8750d64e1 showopts plymouth.enable=0 printk.devkmsg=on log_buf_len=1M systemd.log_level=debug systemd.log_target=console
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000093fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000094000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005b575fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000005b576000-0x000000005c235fff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000005c236000-0x00000000790fefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000790ff000-0x00000000791fefff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000791ff000-0x000000007b5fefff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007b5ff000-0x000000007b7fefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000007b7ff000-0x000000007b7fffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007b800000-0x000000008fffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000c7fffffff] usable
>[    0.0] debug: ignoring loglevel setting.
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.8 present.
>[    0.000000] DMI: HP ProLiant ML350 Gen9, BIOS P92 07/11/2014
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0xc80000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-DFFFF write-protect
>[    0.000000]   E0000-EFFFF uncachable
>[    0.000000]   F0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000080000000 mask 3FFF80000000 uncachable
>[    0.000000]   1 base 038000000000 mask 3F8000000000 uncachable
>[    0.000000]   2 base 00007C000000 mask 3FFFFC000000 uncachable
>[    0.000000]   3 base 00007FC00000 mask 3FFFFFC00000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] x2apic: enabled by BIOS, switching to x2apic ops
>[    0.000000] e820: last_pfn = 0x7b800 max_arch_pfn = 0x400000000
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff92924008e000] 8e000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x70d269000, 0x70d269fff] PGTABLE
>[    0.000000] BRK [0x70d26a000, 0x70d26afff] PGTABLE
>[    0.000000] BRK [0x70d26b000, 0x70d26bfff] PGTABLE
>[    0.000000] BRK [0x70d26c000, 0x70d26cfff] PGTABLE
>[    0.000000] BRK [0x70d26d000, 0x70d26dfff] PGTABLE
>[    0.000000] BRK [0x70d26e000, 0x70d26efff] PGTABLE
>[    0.000000] BRK [0x70d26f000, 0x70d26ffff] PGTABLE
>[    0.000000] BRK [0x70d270000, 0x70d270fff] PGTABLE
>[    0.000000] BRK [0x70d271000, 0x70d271fff] PGTABLE
>[    0.000000] log_buf_len: 1048576 bytes
>[    0.000000] early log buf free: 257980(98%)
>[    0.000000] RAMDISK: [mem 0xc7ce30000-0xc7dffefff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP    )
>[    0.000000] ACPI: XSDT 0x000000007B7E8188 0000EC (v01 HP1000013)
>[    0.000000] ACPI: FACP 0x000000007B7F6000 00010C (v05 HP     ProLiant 00000001 HP   00000001)
>[    0.000000] ACPI: DSDT 0x000000007B7D8000 00F6B6 (v02 HP     DSDT     00000002 HPAG 00020000)
>[    0.000000] ACPI: FACS 0x000000007B57A000 000040
>[    0.000000] ACPI: UEFI 0x000000007B5D0000 000042 (v01 HP     ProLiant 00000000      00000000)
>[    0.000000] ACPI: MCEJ 0x000000007B7FC000 000130 (v01 HP     ProLiant 00000001 INTL 0100000D)
>[    0.000000] ACPI: SSDT 0x000000007B7FB000 000064 (v02 HP     SpsNvs   00000002 INTL 20130328)
>[    0.000000] ACPI: HEST 0x000000007B7FA000 0000A8 (v01 HP     ProLiant 00000001 INTL 00000001)
>[    0.000000] ACPI: BERT 0x000000007B7F9000 000030 (v01 HP     ProLiant 00000001 INTL 00000001)
>[    0.000000] ACPI: ERST 0x000000007B7F8000 000230 (v01 HP     ProLiant 00000001 INTL 00000001)
>[    0.000000] ACPI: EINJ 0x000000007B7F7000 000150 (v01 HP     ProLiant 00000001 INTL 00000001)
>[    0.000000] ACPI: HPET 0x000000007B7F5000 000038 (v01 HP     ProLiant 00000001 HP   00000001)
>[    0.000000] ACPI: PMCT 0x000000007B7F4000 000064 (v01 HP     ProLiant 00000001 HP   00000001)
>[    0.000000] ACPI: WDDT 0x000000007B7F3000 000040 (v01 HP     ProLiant 00000001 HP   00000001)
>[    0.000000] ACPI: APIC 0x000000007B7F2000 000844 (v03 HP     ProLiant 00000001 HP   00000001)
>[    0.000000] ACPI: MCFG 0x000000007B7F1000 00003C (v01 HP     ProLiant 00000001 HP   00000001)
>[    0.000000] ACPI: SLIT 0x000000007B7F0000 000030 (vP   00000001)
>[    0.000000] ACPI: SRAT 0x000000007B7EF000 000790 (v03 HP     ProLiant 00000001 HP   00000001)
>[    0.000000] ACPI: SPMI 0x000000007B7EE000 000041 (v05 HP     ProLiant 00000001 HP   00000001)
>[    0.000000] ACPI: RASF 0x000000007B7ED000 000030 (v01 HP     ProLiant 00000001 HP   00000001)
>[    0.000000] ACPI: SPCR 0x000000007B7EC000 000050 (v01 HP     ProLiant 00000001 HP   00000001)
>[    0.000000] ACPI: MSCT 0x000000007B7EB000 000064 (v01 HP     ProLiant 00000001 HP   00000001)
>[    0.000000] ACPI: BDAT 0x000000007B7EA000 000030 (v01 HP     ProLiant 00000001 HP   00000001)
>[    0.000000] ACPI: PCCT 0x000000007B7E9000 00006E (v01 HP     ProLiant 00000001 HP   00000001)
>[    0.000000] ACPI: SSDT 0x000000007B7D0000 0071EE (v02 HP     PCISSDT  00000002 HPAG 00020000)
>[    0.000000] ACPI: SSDT 0x000000007B7CF000 0001CB (v02 HP     TIMESSDT 00000002 HPAG 00020000)
>[    0.000000] ACPI: SSDT 0x000000007B7CE000 0002F2 (v01 HP     pmab     00000001 INTL 20130328)
>[    0.000000] ACPI: DMAR 0x000000007B7FD000 000348 (v01 INTEL  INTEL ID 00000001 ?    00000001)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] Setting APIC routing to cluster x2apic.
>[    0.000000] SRAT: PXM 0 -> APIC 0x0000 -> NodM 0 -> APIC 0x0002 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0004 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0006 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0008 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0010 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0012 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0014 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0016 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0020 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0022 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0024 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0026 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0028 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0030 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0032 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0034 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0036 -> Node 0
>[    0.000000] SRAT: PXM 1 -> APIC 0x0040 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0042 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0044 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0046 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0048 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0050 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0052 -> Node 1
>[    0.000000] SRAT: PXM 1 ->
>[    0.000000] SRAT: PXM 1 -> APIC 0x0056 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0060 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0062 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0064 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0066 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0068 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0070 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0072 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0074 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0076 -> Node 1
>[    0.000000] SRAT: PXM 0 -> APIC 0x0001 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0003 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0005 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0007 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0009 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0011 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0013 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0015 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0017 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0021 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0023 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0025 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0027 -> Node 0
>[    0.000000] SRAT: PXM 0 -> 0.000000] SRAT: PXM 0 -> APIC 0x0031 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0033 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0035 -> Node 0
>[    0.000000] SRAT: PXM 0 -> APIC 0x0037 -> Node 0
>[    0.000000] SRAT: PXM 1 -> APIC 0x0041 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0043 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0045 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0047 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0049 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0051 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0053 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0055 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0057 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0061 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0063 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0065 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0067 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0069 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0071 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0073 -> Node 1
>[    0.000000] SRAT: PXM 1 -> APIC 0x0075 -> Node 1
>[    0.00077 -> Node 1
>[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x47fffffff]
>[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x480000000-0x67fffffff]
>[    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x680000000-0xa7fffffff]
>[    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0xa80000000-0xc7fffffff]
>[    0.000000] NUMA: Initialized distance table, cnt=2
>[    0.000000] NUMA: Node 0 [mem 0x00000000-0x47fffffff] + [mem 0x480000000-0x67fffffff] -> [mem 0x00000000-0x67fffffff]
>[    0.000000] NUMA: Node 1 [mem 0x680000000-0xa7fffffff] + [mem 0xa80000000-0xc7fffffff] -> [mem 0x680000000-0xc7fffffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x67ffea000-0x67fffffff]
>[    0.000000] NODE_DATA(1) allocated [mem 0xc7fee9000-0xc7fefefff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000c7fffffff]
>[    0.000000]   Device   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000093fff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000005b575fff]
>[    0.000000]   node   0: [mem 0x000000005c236000-0x00000000790fefff]
>[    0.000000]   node   0: [mem 0x000000007b7ff000-0x000000007b7fffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000067fffffff]
>[    0.000000]   node   1:0-0x0000000c7fffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000067fffffff]
>[    0.000000] On node 0 totalpages: 6259667
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3987 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 7633 pages used for memmap
>[    0.000000]   DMA32 zone: 488512 pages, LIFO batch:31
>[    0.000000]   Normal zone: 90112 pages used for memmap
>[    0.000000]   Normal zone: 5767168 pages, LIFO batch:31
>[    0.000000] Initmem setup node 1 [mem 0x0000000680000000-0x0000000c7fffffff]
>[    0.000000] On node 1 totalpages: 6291456
>[    0.000000]   Normal zone: 98304 pages used for memmap
>[    0.000000]   Normal zone: 6291456 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: X2APIC_NMI (uid[0x00] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x01] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x02] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x03] high level lint[0x1])
>[    0.000000] ACPI: X2APIint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x05] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x06] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x07] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x08] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x09] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x10] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x11] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x12] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x13] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x14] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x15] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x16] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x17] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x20] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x21] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x22] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x23] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x24] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x25] high level lint[0x1])
>[    0.00000] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x27] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x28] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x29] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x30] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x31] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x32] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x33] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x34] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x35] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x36] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x37] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x40] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x41] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x42] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x43] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x44] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x45] high level lint[0x1])
>[    0.000000] ACPI: X2l lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x47] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x48] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x49] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x50] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x51] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x52] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x53] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x54] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x55] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x56] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x57] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x60] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x61] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x62] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x63] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x64] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x65] high  0.000000] ACPI: X2APIC_NMI (uid[0x66] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x67] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x68] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x69] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x70] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x71] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x72] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x73] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x74] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x75] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x76] high level lint[0x1])
>[    0.000000] ACPI: X2APIC_NMI (uid[0x77] high level lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
>[    0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec40000, GSI 48-71
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq CPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 72 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00094000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x5b576000-0x5c235fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x790ff000-0x791fefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x791ff000-0x7b5fefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7b5ff000-0x7b7fefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7b800000-0x8fffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xff7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
>[    0.000000] e820: [mem 0x90000000-0xff7fffff] available for PCI devices
>[    0.000000] Booting pahardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:72 nr_node_ids:2
>[    0.000000] percpu: Embedded 38 pages/cpu @ffff9298a7400000 s117464 r8192 d29992 u262144
>[    0.000000] pcpu-alloc: s117464 r8192 d29992 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
>[    0.000000] pcpu-alloc: [0] 16 17 36 37 38 39 40 41 [0] 42 43 44 45 46 47 48 49 
>[    0.000000] pcpu-alloc: [0] 50 51 52 53 -- -- -- -- [1] 18 19 20 21 22 23 24 25 
>[    0.000000] pcpu-alloc: [1] 26 27 28 29 30 31 32 33 [1] 34 35 54 55 56 57 58 59 
>[    0.000000] pcpu-alloc: [1] 60 61 62 63 64 65 66 67 [1] 68 69 70 71 -- -- -- -- 
>[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 12354989
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: root=UUID=3cf1d9fb-f2dd-4ffe-944b-8d5b353d1daa   console=tty0 console=ttyS1,57600 sysrq_always_enabled panic=100 ignore_loglevel unknown_nmi_panic resume=/dev/disk/by-uuid/dea1a983-484e-4c91-accd-97e8750d64e1 showopts plymouth.enable=0 printk.devkmsg=on log_buf_len=1M systemd.log_level=debug systemd    0.000000] sysrq: sysrq always enabled.
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Memory: 6360792K/50204492K available (7448K kernel code, 1307K rwdata, 5256K rodata, 1828K init, 1340K bss, 901828K reserved, 0K cma-reserved)
>[    0.000000] Preemptible hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=72.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=72
>[    0.000000] NR_IRQS:33024 nr_irqs:1816 16
>[    0.000000] Spurious LAPIC timer interrupt on cpu 0
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] console [ttyS1] enabled
>[    0.000000] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2297.345 MHz processor
>[    0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4594.69 BogoMIPS (lpj=9189380)
>[    0.003463] pid_max: default: 73728 minimum: 57 ACPI: Core revision 20170119
>[    0.004000] ACPI: 5 ACPI AML tables successfully acquired and loaded
>[    0.004000] Security Framework initialized
>[    0.004000] AppArmor: AppArmor initialized
>[    0.004000] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
>[    0.004000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
>[    0.004000] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.004000] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.004000] CPU: Physical Processor ID: 0
>[    0.004000] CPU: Processor Core ID: 0
>[    0.004000] mce: CPU supports 22 MCE banks
>[    0.004000] CPU0: Thermal monitoring enabled (TM1)
>[    0.004000] process: using mwait in idle threads
>[    0.004000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>[    0.004000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>[    0.004000] Freeing SMP alternatives memory: 28K
>[    0.004000] ftrace: allocating 29398 entries in 115 pages
>[    0.004000] smpboot: Max logical packages: 4
>[    0.004000] DMAR: Host address width 46
>[    0.004000] DMAR: DRHD base: 0x000000fbffc000 flags: 0x0
>[    0.004000] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
>[    0.004000] DMAR: DRHD base: 0x000000c7ffc000 flags: 0x1
>[    0.00401: reg_base_addr c7ffc000 ver 1:0 cap d2078c106f0466 ecap f020df
>[    0.004000] DMAR: RMRR base: 0x00000079170000 end: 0x00000079172fff
>[    0.004000] DMAR: RMRR base: 0x000000791ed000 end: 0x000000791f0fff
>[    0.004000] DMAR: RMRR base: 0x000000791dd000 end: 0x000000791ecfff
>[    0.004000] DMAR: RMRR base: 0x000000791ca000 end: 0x000000791dafff
>[    0.004000] DMAR: RMRR base: 0x000000791db000 end: 0x000000791dcfff
>[    0.004000] DMAR: RMRR base: 0x0000005b576000 end: 0x0000005b5b5fff
>[    0.004000] DMAR-IR: IOAPIC id 10 under DRHD base  0xfbffc000 IOMMU 0
>[    0.004000] DMAR-IR: IOAPIC id 8 under DRHD base  0xc7ffc000 IOMMU 1
>[    0.004000] DMAR-IR: IOAPIC id 9 under DRHD base  0xc7ffc000 IOMMU 1
>[    0.004000] DMAR-IR: HPET id 0 under DRHD base 0xc7ffc000
>[    0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
>[    0.004000] DMAR-IR: IRQ remapping was enabled on dmar0 but we are not in kdump mode
>[    0.004000] DMAR-IR: Failed to copy IR table for dmar0 from previous kernel
>[    0.004000] DMAR-IR: IRQ remapping was enabled on dmar1 but we are not in kdump mode
>[    0.004000] DMAR-IR: Failed to dmar1 from previous kernel
>[    0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode
>[    0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.041187] TSC deadline timer enabled
>[    0.042445] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz (family: 0x6, model: 0x3f, stepping: 0x2)
>[    0.060042] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Broken BIOS detected, complain to your hardware vendor.
>[    0.064007] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
>[    0.066572] Intel PMU driver.
>[    0.067554] ... version:                3
>[    0.068003] ... bit width:              48
>[    0.069465] ... generic registers:      4
>[    0.070772] ... value mask:             0000ffffffffffff
>[    0.072001] ... max period:             00007fffffffffff
>[    0.073759] ... fixed-purpose events:   3
>[    0.075019] ... event mask:             000000070000000f
>[    0.103940] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.112003] smp: Bringing up secondary CPUs ...
>[    0.144092] x86: Booting SMP configuration:
>[    0.145493] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15 #16 #17
>[    2.071323] .... node  #1, CPUs:   #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31 #32 #33 #34 #35
>[    4.095792] .... node  #0, CPUs:   #36 #37 #38 #39 #40 #41 #42 #43 #44 #45 #46 #47 #48 #49 #50 #51 #52 #53
>[    6.135415] .... node  #1, CPUs:   #54 #55 #56 #57 #58 #59 #60 #61 #62 #63 #64 #65 #66 #67 #68 #69 #70 #71
>[    8.120169] smp: Brought up 2 nodes, 72 CPUs
>[    8.124006] smpboot: Total of 72 processors activated (331123.19 BogoMIPS)
>[    8.130829] sched_clock: Marking stable (8128000000, 0)->(10209811487, -2081811487)
>[    8.279216] node 0 initialised, 5077645 pages in 144ms
>[    8.288848] node 1 initialised, 5657823 pages in 152ms
>[    8.292545] devtmpfs: initialized
>[    8.293905] x86/mm: Memory block size: 128MB
>[    8.306326] PM: Registering ACPI NVS region [mem 0x791ff000-0x7b5fefff] (37748736 bytes)
>[    8.311066] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    8.314522] futex hash table entries: 32768 (order: 9, 2097152 bytes)
>[    8.317842] pinctrl core: initialized pinctrl subsystem
>[    8.319675] RTC time: 12:00:54, date: 10/06/17
>[    8.323062] NET: Registered protocol family 16
>[    8.325390] cpuidle: using governor ladder
>[    8.326849] cpuidle: using governor menu
>[    8.328164] Error parsing PCC subspaces from PCCT
>[    8.329810] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    8.332465] ACPI: bus type PCI registered
>[    8.333862] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    8.336225] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
>[    8.339284] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
>[    8.341503] PCI: Using configuration type 1 for base access
>[    8.344187] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>[    8.353445] HugeTLB registered 1 GB page size, pre-allocated 0 pages
>[    8.355634] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    8.359308] ACPI: Added _OSI(Module Device)
>[    8.361347] ACPI: Added _OSI(Processor Device)
>[    8.362817] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    8.364412] ACPI: Added _OSI(Processor Aggregator Device)
>[    8.395699] ACPI: Interpreter enabled
>[    8.396932] ACPI: (supports S0 S5)
>[    8.398078] ACPI: Using IOAPIC for interrupt routing
>[    8.399735] HEST: Table parsing has been initialized.
>[    8.401394] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    8.415450] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
>[    8.417438] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    8.420093] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
>[    8.422262] PCI host bridge to bus 0000:7f
>[    8.423712] pci_bus 0000:7f: root bus resource [bus 7f]
>[    8.425459] pci 0000:7f:08.0: [8086:2f80] type 00 class 0x088000
>[    8.427461] pci 0000:7f:08.3: [8086:2f83] type 00 class 0x088000
>[    8.429445] pci 0000:7f:09.0: [8086:2f90] type 00 class 0x088000
>[    8.431460] pci 0000:7f:09.3: [8086:2f93] type 00 class 0x088000
>[    8.433514] pci 0000:7f:0b.0: [8086:2f81] type 00 class 0x088000
>[    8.435490] pci 0000:7f:0b.1: [8086:2f36] type 00 class 0x110100
>[    8.437462] pci 0000:7f:0b.2: [8086:2f37] type 00 class 0x110100
>[    8.439452] pci 0000:7f:0c.0: [8086:2fe0] type 00 class 0x088000
>[    8.441444] pci 0000:7f:0c.1: [8086:2fe1] type 00 class 0x088000
>[    8.443485] pci 0000:7f:0c.2: [8086:2fe2] type 00 class 0x088000
>[    8.445472] pci 0000:7f:0c.3: [8086:2fe3] type 00 class 0x088000
>[    8.447450] pci 0000:7f:0c.4: [8086:2fe4] type 00 class 0x088000
>[    8.449442] pci 0000:7f:0c.5: [8086:2fe5] type 00 class 0x088000
>[    8.451403] pci 0000:7f:0c.6: [8086:2fe6] type 00 class 0x088000
>[    8.453452] pci 0000:7f:0c.7: [8086:2fe7] type 00 class 0x088000
>[    8.455418] pci 0000:7f:0d.0: [8086:2fe8] type 00 class 0x088000
>[    8.457382] p8086:2fe9] type 00 class 0x088000
>[    8.959162] pci 0000:7f:0d.2: [8086:2fea] type 00 class 0x088000
>[    8.961145] pci 0000:7f:0d.3: [8086:2feb] type 00 class 0x088000
>[    8.963235] pci 0000:7f:0d.4: [8086:2fec] type 00 class 0x088000
>[    8.965223] pci 0000:7f:0d.5: [8086:2fed] type 00 class 0x088000
>[    8.967208] pci 0000:7f:0d.6: [8086:2fee] type 00 class 0x088000
>[    8.969182] pci 0000:7f:0d.7: [8086:2fef] type 00 class 0x088000
>[    8.971155] pci 0000:7f:0e.0: [8086:2ff0] type 00 class 0x088000
>[    8.973204] pci 0000:7f:0e.1: [8086:2ff1] type 00 class 0x088000
>[    8.975190] pci 0000:7f:0f.0: [8086:2ff8] type 00 class 0x088000
>[    8.977183] pci 0000:7f:0f.1: [8086:2ff9] type 00 class 0x088000
>[    8.979154] pci 0000:7f:0f.2: [8086:2ffa] type 00 class 0x088000
>[    8.981141] pci 0000:7f:0f.3: [8086:2ffb] type 00 class 0x088000
>[    8.983181] pci 0000:7f:0f.4: [8086:2ffc] type 00 class 0x088000
>[    8.985678] pci 0000:7f:0f.5: [8086:2ffd] type 00 class 0x088000
>[    8.987677] pci 0000:7f:0f.6: [8086:2ffe] type 00 class 0x088000
>[    8.989754] pci 0000:7f:10.0: [800 class 0x088000
>[    9.391538] pci 0000:7f:10.1: [8086:2f34] type 00 class 0x110100
>[    9.393597] pci 0000:7f:10.5: [8086:2f1e] type 00 class 0x088000
>[    9.395614] pci 0000:7f:10.6: [8086:2f7d] type 00 class 0x110100
>[    9.397731] pci 0000:7f:10.7: [8086:2f1f] type 00 class 0x088000
>[    9.399760] pci 0000:7f:12.0: [8086:2fa0] type 00 class 0x088000
>[    9.401749] pci 0000:7f:12.1: [8086:2f30] type 00 class 0x110100
>[    9.403812] pci 0000:7f:12.2: [8086:2f70] type 00 class 0x088000
>[    9.405790] pci 0000:7f:12.4: [8086:2f60] type 00 class 0x088000
>[    9.407771] pci 0000:7f:12.5: [8086:2f38] type 00 class 0x110100
>[    9.409799] pci 0000:7f:12.6: [8086:2f78] type 00 class 0x088000
>[    9.411782] pci 0000:7f:13.0: [8086:2fa8] type 00 class 0x088000
>[    9.413950] pci 0000:7f:13.1: [8086:2f71] type 00 class 0x088000
>[    9.415941] pci 0000:7f:13.2: [8086:2faa] type 00 class 0x088000
>[    9.417908] pci 0000:7f:13.3: [8086:2fab] type 00 class 0x088000
>[    9.419868] pci 0000:7f:13.6: [8086:2fae] type 00 class 0x088000
>[    9.421945] pci 0000:7f:13.7: [8086:2faf] type 00 class 0x088000
>[    9.424050] pci 0000:7f:14.0: [8086:2fb0] type 00 class 0x088000
>[    9.426040] pci 0000:7f:14.1: [8086:2fb1] type 00 class 0x088000
>[    9.428163] pci 0000:7f:14.2: [8086:2fb2] type 00 class 0x088000
>[    9.430163: [8086:2fb3] type 00 class 0x088000
>[    9.931894] pci 0000:7f:14.4: [8086:2fbc] type 00 class 0x088000
>[    9.933990] pci 0000:7f:14.5: [8086:2fbd] type 00 class 0x088000
>[    9.935984] pci 0000:7f:14.6: [8086:2fbe] type 00 class 0x088000
>[    9.938038] pci 0000:7f:14.7: [8086:2fbf] type 00 class 0x088000
>[    9.940025] pci 0000:7f:16.0: [8086:2f68] type 00 class 0x088000
>[    9.942016] pci 0000:7f:16.1: [8086:2f79] type 00 class 0x088000
>[    9.944109] pci 0000:7f:16.2: [8086:2f6a] type 00 class 0x088000
>[    9.946101] pci 0000:7f:16.3: [8086:2f6b] type 00 class 0x088000
>[    9.948085] pci 0000:7f:16.6: [8086:2f6e] type 00 class 0x088000
>[    9.950063] pci 0000:7f:16.7: [8086:2f6f] type 00 class 0x088000
>[    9.952074] pci 0000:7f:17.0: [8086:2fd0] type 00 class 0x088000
>[    9.954130] pci 0000:7f:17.1: [8086:2fd1] type 00 class 0x088000
>[    9.956130] pci 0000:7f:17.2: [8086:2fd2] type 00 class 0x088000
>[    9.958119] pci 0000:7f:17.3: [8086:2fd3] type 00 class 0x088000
>[    9.960104] pci 0000:7f:17.4: [8086:2fb8] type 00 class 0x088000
>[    9.962087] pci 0000:7f:17.5: [8086:2fb9] type 00 class 0x088000
>[    9.964145] pci 0000:7f:17.6: [8086:2fba] type 00 class 0x088000
>[    9.966138] pci 0000:7f:17.7: [8086:2fbb] type 00 c  10.365943] pci 0000:7f:1e.0: [8086:2f98] type 00 class 0x088000
>[   10.469834] pci 0000:7f:1e.1: [8086:2f99] type 00 class 0x088000
>[   10.471831] pci 0000:7f:1e.2: [8086:2f9a] type 00 class 0x088000
>[   10.473859] pci 0000:7f:1e.3: [8086:2fc0] type 00 class 0x088000
>[   10.475813] pci 0000:7f:1e.4: [8086:2f9c] type 00 class 0x088000
>[   10.477786] pci 0000:7f:1f.0: [8086:2f88] type 00 class 0x088000
>[   10.479767] pci 0000:7f:1f.2: [8086:2f8a] type 00 class 0x088000
>[   10.481830] ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
>[   10.483845] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[   10.487129] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
>[   10.489340] PCI host bridge to bus 0000:ff
>[   10.490816] pci_bus 0000:ff: root bus resource [bus ff]
>[   10.492568] pci 0000:ff:08.0: [8086:2f80] type 00 class 0x088000
>[   10.494632] pci 0000:ff:08.3: [8086:2f83] type 00 class 0x088000
>[   10.496614] pci 0000:ff:09.0: [8086:2f90] type 00 class 0x088000
>[   10.498583] pci 0000:ff:09.3: [8086:2f93] type 00 class 0x088000
>[   10.500558] pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
>[   10.502f:0b.1: [8086:2f36] type 00 class 0x110100
>[   10.904623] pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
>[   10.906617] pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
>[   10.908588] pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
>[   10.910560] pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
>[   10.912568] pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
>[   10.914613] pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
>[   10.916566] pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
>[   10.918534] pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
>[   10.920495] pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
>[   10.922518] pci 0000:ff:0d.0: [8086:2fe8] type 00 class 0x088000
>[   10.924485] pci 0000:ff:0d.1: [8086:2fe9] type 00 class 0x088000
>[   10.926451] pci 0000:ff:0d.2: [8086:2fea] type 00 class 0x088000
>[   10.928553] pci 0000:ff:0d.3: [8086:2feb] type 00 class 0x088000
>[   10.930541] pci 0000:ff:0d.4: [8086:2fec] type 00 class 0x088000
>[   10.932539] pci 0000:ff:0d.5: [8086:2fed] type 00 class 0x088000
>[   10.934554] pci 0000:ff:0d.6: [8086:2fee] type 00 class 0x088000
>[   10.936549] pci 0000:ff:0d.7: [8086:2fef] type 00 class 0x088000
>[   10.938568] pci 0000:ff:0e.0: [8086:2ff0] type 00 class 0x088000
>[   10.940541] pci 0000:ff:0e.1: [8086:2ff1] type 00 class 0x088000
>[   10.942623] pci 0000:ff:0f.0: [8086:2ff8] type 00 c  11.341989] pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
>[   11.446362] pci 0000:ff:0f.2: [8086:2ffa] type 00 class 0x088000
>[   11.448345] pci 0000:ff:0f.3: [8086:2ffb] type 00 class 0x088000
>[   11.450354] pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
>[   11.452502] pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
>[   11.454513] pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
>[   11.456486] pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
>[   11.458449] pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
>[   11.460427] pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
>[   11.462386] pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
>[   11.464397] pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
>[   11.466372] pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
>[   11.468341] pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
>[   11.470302] pci 0000:ff:12.2: [8086:2f70] type 00 class 0x088000
>[   11.472267] pci 0000:ff:12.4: [8086:2f60] type 00 class 0x088000
>[   11.474307] pci 0000:ff:12.5: [8086:2f38] type 00 class 0x110100
>[   11.476277] pci 0000:ff:12.6: [8086:2f78] type 00 class 0x088000
>[   11.478243] pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
>[   11.480205] pci 0000:ff:13.1: [808671] type 00 class 0x088000
>[   11.582174] pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
>[   11.584235] pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
>[   11.586219] pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
>[   11.588233] pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
>[   11.590213] pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
>[   11.592212] pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
>[   11.594254] pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
>[   11.596237] pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
>[   11.598228] pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
>[   11.600317] pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
>[   11.602306] pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
>[   11.604359] pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
>[   11.606337] pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
>[   11.608313] pci 0000:ff:16.1: [8086:2f79] type 00 class 0x088000
>[   11.610745] pci 0000:ff:16.2: [8086:2f6a] type 00 class 0x088000
>[   11.612756] pci 0000:ff:16.3: [8086:2f6b] type 00 class 0x088000
>[   11.614757] pci 0000:ff:16.6: [808 class 0x088000
>[   12.016548] pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
>[   12.018535] pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
>[   12.020530] pci 0000:ff:17.1: [8086:2fd1] type 00 class 0x088000
>[   12.022556] pci 0000:ff:17.2: [8086:2fd2] type 00 class 0x088000
>[   12.024549] pci 0000:ff:17.3: [8086:2fd3] type 00 class 0x088000
>[   12.026519] pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
>[   12.028496] pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
>[   12.030467] pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
>[   12.032468] pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
>[   12.034476] pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
>[   12.036447] pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
>[   12.038417] pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
>[   12.040432] pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
>[   12.042436] pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
>[   12.044475] pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
>[   12.046458] pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x08800 ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
>[   12.550213] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[   12.553074] acpi PNP0A08:00: _OSC: platform does not support [AER]
>[   12.555231] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
>[   12.557788] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
>[   12.560677] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000cbfff window] (conflicts with Video ROM [mem 0x000c0000-0x000c7fff])
>[   12.565311] PCI host bridge to bus 0000:00
>[   12.566664] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[   12.568859] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[   12.571204] pci_bus 0000:00: root bus resource [io  0x1000-0x9fff window]
>[   12.573414] pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff window]
>[   12.575875] pci_bus 0000:00: root bus resource [mem 0x38000000000-0x3bfffffffff window]
>[   12.578428] pci_bus 0000:00: root bus resource [bus 00-7e]
>[   12.580214] pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
>[   12.582290] [8086:2f02] type 01 class 0x060400
>[   13.084193] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[   13.086258] pci 0000:00:01.0: System wakeup disabled by ACPI
>[   13.088142] pci 0000:00:01.1: [8086:2f03] type 01 class 0x060400
>[   13.090150] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
>[   13.092210] pci 0000:00:01.1: System wakeup disabled by ACPI
>[   13.094146] pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
>[   13.096135] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>[   13.098175] pci 0000:00:02.0: System wakeup disabled by ACPI
>[   13.100049] pci 0000:00:02.1: [8086:2f05] type 01 class 0x060400
>[   13.102056] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
>[   13.104259] pci 0000:00:02.2: [8086:2f06] type 01 class 0x060400
>[   13.106261] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
>[   13.108348] pci 0000:00:02.3: [8086:2f07] type 01 class 0x060400
>[   13.110840] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
>[   13.113001] pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
>[   13.114998] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>[   13.117060] pci 0000:00:03.0: System wakeup disabled by ACPI
>[   13.118919] pci 0000:00:03.1: [8086:2f09] type 01 class 0x060400
>[   13.120897] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
>[   13.123047] pci 0000:00:03.2: [8086:2f0a] type 01 class 0x060400
>[ i 0000:00:03.2: PME# supported from D0 D3hot D3cold
>[   13.526956] pci 0000:00:03.3: [8086:2f0b] type 01 class 0x060400
>[   13.528956] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
>[   13.531036] pci 0000:00:04.0: [8086:2f20] type 00 class 0x088000
>[   13.533055] pci 0000:00:04.0: reg 0x10: [mem 0x3bffff2c000-0x3bffff2ffff 64bit]
>[   13.535540] pci 0000:00:04.1: [8086:2f21] type 00 class 0x088000
>[   13.537494] pci 0000:00:04.1: reg 0x10: [mem 0x3bffff28000-0x3bffff2bfff 64bit]
>[   13.539994] pci 0000:00:04.2: [8086:2f22] type 00 class 0x088000
>[   13.541948] pci 0000:00:04.2: reg 0x10: [mem 0x3bffff24000-0x3bffff27fff 64bit]
>[   13.544495] pci 0000:00:04.3: [8086:2f23] type 00 class 0x088000
>[   13.546446] pci 0000:00:04.3: reg 0x10: [mem 0x3bffff20000-0x3bffff23fff 64bit]
>[   13.548941] pci 0000:00:04.4: [8086:2f24] type 00 class 0x088000
>[   13.550930] pci 0000:00:04.4: reg 0x10: [mem 0x3bffff1c000-0x3bffff1ffff 64bit]
>[   13.553479] pci 0000:00:04.5: [8086:2f25] type 00 class 0x088000
>[   13.555444] pci 0000:00:04.5: reg 0x10: [mem 0x3bffff18000-0x3bffff1bfff 64bit]
>[   13.557954] pci 0000:00:04.6: [8086:2f26] type 00 class 0x088000
>[   13.559930] pci 0000:00:04.6: reg 0x10: [mem 0x3bffff14000-0x3bffff17fff 64bit]
>[   13.562467] [8086:2f27] type 00 class 0x088000
>[   14.064205] pci 0000:00:04.7: reg 0x10: [mem 0x3bffff10000-0x3bffff13fff 64bit]
>[   14.066727] pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
>[   14.068799] pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
>[   14.070907] pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
>[   14.073075] pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
>[   14.075035] pci 0000:00:05.4: reg 0x10: [mem 0x93c04000-0x93c04fff]
>[   14.077204] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
>[   14.079331] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
>[   14.081259] pci 0000:00:14.0: reg 0x10: [mem 0x3bffff00000-0x3bffff0ffff 64bit]
>[   14.083715] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[   14.085701] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
>[   14.087670] pci 0000:00:1a.0: reg 0x10: [mem 0x93c02000-0x93c023ff]
>[   14.089777] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[   14.091858] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
>[   14.093964] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[   14.096087] pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
>[   14.098151] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[   14.100391] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
>[   14.102447] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>[   14.104517] pci 0000:keup disabled by ACPI
>[   14.606193] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
>[   14.608160] pci 0000:00:1d.0: reg 0x10: [mem 0x93c01000-0x93c013ff]
>[   14.610689] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[   14.612861] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
>[   14.615012] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
>[   14.616959] pci 0000:00:1f.2: reg 0x10: [io  0x3058-0x305f]
>[   14.618760] pci 0000:00:1f.2: reg 0x14: [io  0x307c-0x307f]
>[   14.620541] pci 0000:00:1f.2: reg 0x18: [io  0x3050-0x3057]
>[   14.622369] pci 0000:00:1f.2: reg 0x1c: [io  0x3078-0x307b]
>[   14.624284] pci 0000:00:1f.2: reg 0x20: [io  0x3020-0x303f]
>[   14.626091] pci 0000:00:1f.2: reg 0x24: [mem 0x93c00000-0x93c007ff]
>[   14.628129] pci 0000:00:1f.2: PME# supported from D3hot
>[   14.629922] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
>[   14.631896] pci 0000:00:1f.3: reg 0x10: [mem 0x3bffff31000-0x3bffff310ff 64bit]
>[   14.634320] pci 0000:00:1f.3: reg 0x20: [io  0x3000-0x301f]
>[   14.636334] pci 0000:07:00.0: [1077:8020] type 00 class 0x020000
>[   14.638290] pci 0000:07:00.0: reg 0x10: [mem 0x93600000-0x937fffff 64bit]
>[   14.640470] pci 0000:07:00.0: reg 0x20: [mem 0x93850000-0x9385ffff 64bit]
>[   14.642984] pci 0000:07:00.0: reg 0x30: [mem 0x00000000-0x00[   15.016211] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
>[   15.047168] pci 0000:07:00.1: [1077:8020] type 00 class 0x020000
>[   15.049140] pci 0000:07:00.1: reg 0x10: [mem 0x93400000-0x935fffff 64bit]
>[   15.051386] pci 0000:07:00.1: reg 0x20: [mem 0x93840000-0x9384ffff 64bit]
>[   15.053663] pci 0000:07:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref]
>[   15.055860] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
>[   15.057887] pci 0000:07:00.4: [1077:8022] type 00 class 0x028000
>[   15.059813] pci 0000:07:00.4: reg 0x10: [mem 0x93200000-0x933fffff 64bit]
>[   15.062007] pci 0000:07:00.4: reg 0x20: [mem 0x93830000-0x9383ffff 64bit]
>[   15.064259] pci 0000:07:00.4: reg 0x30: [mem 0x00000000-0x0003ffff pref]
>[   15.066455] pci 0000:07:00.4: PME# supported from D0 D3hot D3cold
>[   15.068478] pci 0000:07:00.5: [1077:8022] type 00 class 0x028000
>[   15.070424] pci 0000:07:00.5: reg 0x10: [mem 0x93000000-0x931fffff 64bit]
>[   15.072690] pci 0000:07:00.5: reg 0x20: [mem 0x93820000-0x9382ffff 64bit]
>[   15.074912] pci 0000:07:00.5: reg 0x30: [mem 0x00000000-0x0003ffff pref]
>[ 000:07:00.5: PME# supported from D0 D3hot D3cold
>[   15.579069] pci 0000:07:00.6: [1077:8021] type 00 class 0x0c0400
>[   15.581034] pci 0000:07:00.6: reg 0x10: [mem 0x92e00000-0x92ffffff 64bit]
>[   15.583337] pci 0000:07:00.6: reg 0x20: [mem 0x93810000-0x9381ffff 64bit]
>[   15.585519] pci 0000:07:00.6: reg 0x30: [mem 0x00000000-0x0003ffff pref]
>[   15.587738] pci 0000:07:00.6: PME# supported from D0 D3hot D3cold
>[   15.589778] pci 0000:07:00.7: [1077:8021] type 00 class 0x0c0400
>[   15.591732] pci 0000:07:00.7: reg 0x10: [mem 0x92c00000-0x92dfffff 64bit]
>[   15.593997] pci 0000:07:00.7: reg 0x20: [mem 0x93800000-0x9380ffff 64bit]
>[   15.596165] pci 0000:07:00.7: reg 0x30: [mem 0x00000000-0x0003ffff pref]
>[   15.598356] pci 0000:07:00.7: PME# supported from D0 D3hot D3cold
>[   15.600383] pci 0000:00:01.0: PCI bridge to [bus 07]
>[   15.602006] pci 0000:00:01.0:   bridge window [mem 0x92c00000-0x938fffff]
>[   15.604378] pci 0000:00:01.1: PCI bridge to [bus 0d]
>[   15.606094] pci 0000:00:02.0: PCI bridge to [bus 04]
>[   15.607767] pci 0000:00:02.1: PCI bridge to [bus 10]
>[   15.609930] pci 0000:03:00.0: [103c:3239] type 00 class 0x010400
>[   15.611883] pci 0000:03:00.0: reg 0x10: [mem 0x93a00000-0x93afffff 64bit]
>[   15.614151] pci 0000:03:00.0: reg 0x18: [mem 0x93b00000-0x93b003ff 64bit]
>[   0:03:00.0: reg 0x20: [io  0x2000-0x20ff]
>[   16.117935] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
>[   16.120140] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
>[   16.122044] pci 0000:00:02.2: PCI bridge to [bus 03]
>[   16.123745] pci 0000:00:02.2:   bridge window [io  0x2000-0x2fff]
>[   16.125725] pci 0000:00:02.2:   bridge window [mem 0x93a00000-0x93bfffff]
>[   16.127963] pci 0000:00:02.3: PCI bridge to [bus 11]
>[   16.129809] pci 0000:00:03.0: PCI bridge to [bus 0a]
>[   16.131468] pci 0000:00:03.1: PCI bridge to [bus 12]
>[   16.133246] pci 0000:00:03.2: PCI bridge to [bus 13]
>[   16.134920] pci 0000:00:03.3: PCI bridge to [bus 14]
>[   16.136560] pci 0000:00:1c.0: PCI bridge to [bus 15]
>[   16.138221] pci 0000:01:00.0: [103c:3306] type 00 class 0x088000
>[   16.140189] pci 0000:01:00.0: reg 0x10: [io  0x1200-0x12ff]
>[   16.142007] pci 0000:01:00.0: reg 0x14: [mem 0x92a8d000-0x92a8d1ff]
>[   16.144103] pci 0000:01:00.0: reg 0x18: [io  0x1100-0x11ff]
>[   16.146059] pci 0000:01:00.1: [102b:0533] type 00 class 0x030000
>[   16.148035] pci 0000:01:00.1: reg 0x10: [mem 0x91000000-0x91ffffff pref]
>[   16.150201] pci 0000:01:00.1: reg 0x14: [mem 0x9fff]
>[   16.552022] pci 0000:01:00.1: reg 0x18: [mem 0x92000000-0x927fffff]
>[   16.554318] pci 0000:01:00.2: [103c:3307] type 00 class 0x088000
>[   16.556325] pci 0000:01:00.2: reg 0x10: [io  0x1000-0x10ff]
>[   16.558140] pci 0000:01:00.2: reg 0x14: [mem 0x92a8c000-0x92a8c0ff]
>[   16.560152] pci 0000:01:00.2: reg 0x18: [mem 0x92900000-0x929fffff]
>[   16.562189] pci 0000:01:00.2: reg 0x1c: [mem 0x92a00000-0x92a7ffff]
>[   16.564248] pci 0000:01:00.2: reg 0x20: [mem 0x92a80000-0x92a87fff]
>[   16.566277] pci 0000:01:00.2: reg 0x24: [mem 0x92800000-0x928fffff]
>[   16.568290] pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
>[   16.570485] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
>[   16.573027] pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300
>[   16.575057] pci 0000:01:00.4: reg 0x20: [io  0x1300-0x131f]
>[   16.591016] pci 0000:00:1c.2: PCI bridge to [bus 01]
>[   16.592736] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
>[   16.594724] pci 0000:00:1c.2:   bridge window [mem 0x90000000-0x92afffff]
>[   16.597025] pci 0000:02:00.0: 0 class 0x020000
>[   17.098965] pci 0000:02:00.0: reg 0x10: [mem 0x93990000-0x9399ffff 64bit pref]
>[   17.101325] pci 0000:02:00.0: reg 0x18: [mem 0x939a0000-0x939affff 64bit pref]
>[   17.103777] pci 0000:02:00.0: reg 0x20: [mem 0x939b0000-0x939bffff 64bit pref]
>[   17.106092] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
>[   17.108323] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[   17.110984] pci 0000:02:00.1: [14e4:1657] type 00 class 0x020000
>[   17.113050] pci 0000:02:00.1: reg 0x10: [mem 0x93960000-0x9396ffff 64bit pref]
>[   17.115376] pci 0000:02:00.1: reg 0x18: [mem 0x93970000-0x9397ffff 64bit pref]
>[   17.117727] pci 0000:02:00.1: reg 0x20: [mem 0x93980000-0x9398ffff 64bit pref]
>[   17.120072] pci 0000:02:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref]
>[   17.122326] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
>[   17.124427] pci 0000:02:00.2: [14e4:1657] type 00 class 0x020000
>[   17.126516] pci 0000:02:00.2: reg 0x10: [mem 0x93930000-0x9393ffff 64bit pref]
>[   17.128866] pci 0000:02:00.2: reg 0x18: [mem 0x93940000-0x9394ffff 64bit pref]
>[   17.131189] pci 0000:02:00.2: reg 0x20: [mem 0x93950000-0x9395ffff 64bit pref]
>[   17.133603] pci 0000:02:00.2: reg 0x30: [mem 0x000ref]
>[   17.635838] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
>[   17.637953] pci 0000:02:00.3: [14e4:1657] type 00 class 0x020000
>[   17.640173] pci 0000:02:00.3: reg 0x10: [mem 0x93900000-0x9390ffff 64bit pref]
>[   17.642824] pci 0000:02:00.3: reg 0x18: [mem 0x93910000-0x9391ffff 64bit pref]
>[   17.645159] pci 0000:02:00.3: reg 0x20: [mem 0x93920000-0x9392ffff 64bit pref]
>[   17.647464] pci 0000:02:00.3: reg 0x30: [mem 0x00000000-0x0003ffff pref]
>[   17.649716] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
>[   17.661661] pci 0000:00:1c.4: PCI bridge to [bus 02]
>[   17.663418] pci 0000:00:1c.4:   bridge window [mem 0x92b00000-0x92bfffff]
>[   17.665644] pci 0000:00:1c.4:   bridge window [mem 0x93900000-0x939fffff 64bit pref]
>[   17.668167] pci_bus 0000:00: on NUMA node 0
>[   17.669731] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[   17.672524] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[   17.675278] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[   17.678065] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[   17.680870] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[   17.683730] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[   17.686486] ACPI: PCI Interrupt Link [LNKG] (9 10 11 12 14 15) *0, disabled.
>[   18.089386] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[   18.092443] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
>[   18.094499] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[   18.097261] acpi PNP0A08:01: _OSC: platform does not support [AER]
>[   18.099454] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
>[   18.101950] acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
>[   18.104781] PCI host bridge to bus 0000:80
>[   18.106136] pci_bus 0000:80: root bus resource [io  0xa000-0xffff window]
>[   18.108335] pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff window]
>[   18.111231] pci_bus 0000:80: root bus resource [mem 0x3c000000000-0x3ffffffffff window]
>[   18.113891] pci_bus 0000:80: root bus resource [bus 80-fe]
>[   18.115680] pci 0000:80:00.0: [8086:2f01] type 01 class 0x060400
>[   18.117657] pci 0000:80:00.0: PME# supported from D0 D3hot D3cold
>[   18.119644] pci 0000:80:00.0: System wakeup disabled by ACPI
>[   18.121465] pci 0000:80:01.0: [8086:2f02] type 01 class 0x060400
>[   18.123494] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
>[   18.125454] pci 0000:80:01.0: System wakeup disabled by ACPI
>[   18.127308] pci 0000:80:01.1: [8086:2f03] type 01 class 0x060400
>[   18.129273] pci 0supported from D0 D3hot D3cold
>[   18.631188] pci 0000:80:01.1: System wakeup disabled by ACPI
>[   18.633155] pci 0000:80:02.0: [8086:2f04] type 01 class 0x060400
>[   18.635164] pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
>[   18.637157] pci 0000:80:02.0: System wakeup disabled by ACPI
>[   18.639011] pci 0000:80:02.1: [8086:2f05] type 01 class 0x060400
>[   18.641140] pci 0000:80:02.1: PME# supported from D0 D3hot D3cold
>[   18.643454] pci 0000:80:02.2: [8086:2f06] type 01 class 0x060400
>[   18.645459] pci 0000:80:02.2: PME# supported from D0 D3hot D3cold
>[   18.647466] pci 0000:80:02.3: [8086:2f07] type 01 class 0x060400
>[   18.649428] pci 0000:80:02.3: PME# supported from D0 D3hot D3cold
>[   18.651441] pci 0000:80:03.0: [8086:2f08] type 01 class 0x060400
>[   18.653557] pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
>[   18.655682] pci 0000:80:03.0: System wakeup disabled by ACPI
>[   18.657545] pci 0000:80:03.1: [8086:2f09] type 01 class 0x060400
>[   18.659503] pci 0000:80:03.1: PME# supported from D0 D3hot D3cold
>[   18.661676] pci 0000:80:03.2: [8086:2f0a] type 01 class 0x060400
>[   18.663867] pci 0000:80:03.2: PME# s3hot D3cold
>[   19.165816] pci 0000:80:03.3: [8086:2f0b] type 01 class 0x060400
>[   19.167805] pci 0000:80:03.3: PME# supported from D0 D3hot D3cold
>[   19.169875] pci 0000:80:04.0: [8086:2f20] type 00 class 0x088000
>[   19.171823] pci 0000:80:04.0: reg 0x10: [mem 0x3fffff1c000-0x3fffff1ffff 64bit]
>[   19.174324] pci 0000:80:04.1: [8086:2f21] type 00 class 0x088000
>[   19.176278] pci 0000:80:04.1: reg 0x10: [mem 0x3fffff18000-0x3fffff1bfff 64bit]
>[   19.178716] pci 0000:80:04.2: [8086:2f22] type 00 class 0x088000
>[   19.180653] pci 0000:80:04.2: reg 0x10: [mem 0x3fffff14000-0x3fffff17fff 64bit]
>[   19.183124] pci 0000:80:04.3: [8086:2f23] type 00 class 0x088000
>[   19.185072] pci 0000:80:04.3: reg 0x10: [mem 0x3fffff10000-0x3fffff13fff 64bit]
>[   19.187474] pci 0000:80:04.4: [8086:2f24] type 00 class 0x088000
>[   19.189393] pci 0000:80:04.4: reg 0x10: [mem 0x3fffff0c000-0x3fffff0ffff 64bit]
>[   19.191820] pci 0000:80:04.5: [8086:2f25] type 00 class 0x088000
>[   19.193839] pci 0000:80:04.5: reg 0x10: [mem 0x3fffff08000-0x3fffff0bfff 64bit]
>[   19.196254] pci 0000:80:04.6: [8086:2f26] type 00 class 0x088000
>[   19.198194] pci 0000:80:04.6: reg 0x10: [mem 0x3fffff04000-0x3fffff07fff 64bit]
>[   19.200612] pci 0000:80:04.7: [8086:2f27] type 00 cl[   19.573497] pci 0000:80:04.7: reg 0x10: [mem 0x3fffff00000-0x3fffff03fff 64bit]
>[   19.604914] pci 0000:80:05.0: [8086:2f28] type 00 class 0x088000
>[   19.606939] pci 0000:80:05.1: [8086:2f29] type 00 class 0x088000
>[   19.609403] pci 0000:80:05.2: [8086:2f2a] type 00 class 0x088000
>[   19.611423] pci 0000:80:05.4: [8086:2f2c] type 00 class 0x080020
>[   19.613453] pci 0000:80:05.4: reg 0x10: [mem 0xc8000000-0xc8000fff]
>[   19.615644] pci 0000:80:00.0: PCI bridge to [bus 81]
>[   19.617348] pci 0000:80:01.0: PCI bridge to [bus 8d]
>[   19.619074] pci 0000:80:01.1: PCI bridge to [bus 87]
>[   19.620785] pci 0000:80:02.0: PCI dge to [bus 84]
>[   19.722512] pci 0000:80:02.1: PCI bridge to [bus 90]
>[   19.724144] pci 0000:80:02.2: PCI bridge to [bus 91]
>[   19.725792] pci 0000:80:02.3: PCI bridge to [bus 92]
>[   19.727498] pci 0000:80:03.0: PCI bridge to [bus 8a]
>[   19.729144] pci 0000:80:03.1: PCI bridge to [bus 93]
>[   19.730844] pci 0000:80:03.2: PCI bridge to [bus 94]
>[   19.732557] pci 0000:80:03.3: PCI bridge to [bus 95]
>[   19.734651] pci_bus 0000:80: on NUMA node 1
>[   19.736172] ACPI: Enabled 9 GPEs in block 00 to 3F
>[   19.738079] pci 0000:01:00.1: vgaarb: setting as boot VGA device
>[   19.740014] pci 0000:01:00.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[   19.742808] pci 0000:01:00.1: vgaarb: bridge control possible
>[   19.744701] vgaarb: loaded
>[   19.745873] SCSI subsystem initialized
>[   19.747334] libata veded.
>[   20.148810] PCI: Using ACPI for IRQ routing
>[   20.156067] PCI: pci_cache_line_size set to 64 bytes
>[   20.158207] e820: reserve RAM buffer [mem 0x00094000-0x0009ffff]
>[   20.160198] e820: reserve RAM buffer [mem 0x5b576000-0x5bffffff]
>[   20.162191] e820: reserve RAM buffer [mem 0x790ff000-0x7bffffff]
>[   20.164185] e820: reserve RAM buffer [mem 0x7b800000-0x7bffffff]
>[   20.166389] NetLabel: Initializing
>[   20.167528] NetLabel:  domain hash size = 128
>[   20.168935] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[   20.170782] NetLabel:  unlabeled traffic allowed by default
>[   20.172973] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[   20.175012] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[   20.179161] clocksource: Switched to clocksource hpet
>[   20.202455] VFS: Disk quotas dquot_6.6.0
>[   20.203941] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[   20.206453] AppArmor: AppArmor Filesystem Enabled
>[   20.208098] pnp: PnP ACPI init
>[   20.210116] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
>[   20.212704] system 00:01: [io  0x0500-0x053f] has been reserved
>[   20.214645] system 00:01: [io  0x0400reserved
>[   20.716416] system 00:01: [io  0x0540-0x057f] has been reserved
>[   20.718323] system 00:01: [io  0x0600-0x061f] has been reserved
>[   20.720333] system 00:01: [io  0x0880-0x0883] has been reserved
>[   20.722464] system 00:01: [io  0x0800-0x081f] has been reserved
>[   20.724388] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
>[   20.726496] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
>[   20.728631] system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
>[   20.730841] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
>[   20.733041] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
>[   20.735685] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
>[   20.737787] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
>[   20.739864] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[   20.742166] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
>[   20.744360] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
>[   20.746806] pnp: PnP ACPI: found 4 devices
>[   20.755707] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[   20.758804] pci 0000:07:00.0: BAR 6: assigned [mem 0x93880000-0x938bffff pref]
>[   20.761163] pci 0000:07:00.1: BAR 6: assigned [mem 0x938c0000-0x938fffff pref]
>[   20.763585] pci 0000:07:00.4: BAR 6: no space for [mem size 0x00040000 pref]
>[   20.765841] pci 0000:07:00.4: BAR 6: failed to assign [mem size 0x00040000 pref]
>[   20.768205] pci 0000:07:00.5: BAR 6: no  size 0x00040000 pref]
>[   21.170465] pci 0000:07:00.5: BAR 6: failed to assign [mem size 0x00040000 pref]
>[   21.172919] pci 0000:07:00.6: BAR 6: no space for [mem size 0x00040000 pref]
>[   21.175189] pci 0000:07:00.6: BAR 6: failed to assign [mem size 0x00040000 pref]
>[   21.177601] pci 0000:07:00.7: BAR 6: no space for [mem size 0x00040000 pref]
>[   21.179852] pci 0000:07:00.7: BAR 6: failed to assign [mem size 0x00040000 pref]
>[   21.182212] pci 0000:00:01.0: PCI bridge to [bus 07]
>[   21.183880] pci 0000:00:01.0:   bridge window [mem 0x92c00000-0x938fffff]
>[   21.186048] pci 0000:00:01.1: PCI bridge to [bus 0d]
>[   21.187674] pci 0000:00:02.0: PCI bridge to [bus 04]
>[   21.189446] pci 0000:00:02.1: PCI bridge to [bus 10]
>[   21.191053] pci 0000:03:00.0: BAR 6: assigned [mem 0x93b80000-0x93bfffff pref]
>[   21.193472] pci 0000:00:02.2: PCI bridge to [bus 03]
>[   21.195069] pci 0000:00:02.2:   bridge window [io  0x2000-0x2fff]
>[   21.197052] pci 0000:00:02.2:   bridge window [mem 0x93a00000-0x93bfffff]
>[   21.199237] pci 0000:00:02.3: PCI bridge to [bus 11]
>[   21.200845] pci 0000:00:03.0: PCI bridge to [bus 0a]
>[   21.202524] pci 0000:00:03.1: PCI bridge to [bus 12]
>[   21.204126] pci 0000:00:03.2: PCI bridge 21.589316] pci 0000:00:03.3: PCI bridge to [bus 14]
>[   21.707105] pci 0000:00:1c.0: PCI bridge to [bus 15]
>[   21.708778] pci 0000:01:00.2: BAR 6: assigned [mem 0x90000000-0x9000ffff pref]
>[   21.711098] pci 0000:00:1c.2: PCI bridge to [bus 01]
>[   21.712765] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
>[   21.714733] pci 0000:00:1c.2:   bridge window [mem 0x90000000-0x92afffff]
>[   21.716962] pci 0000:02:00.0: BAR 6: assigned [mem 0x92b00000-0x92b3ffff pref]
>[   21.719284] pci 0000:02:00.1: BAR 6: assigned [mem 0x92b40000-0x92b7ffff pref]
>[   21.721596] pci 0000:02:00.2: BAR 6: assigned [mem 0x92b80000-0x92bbffff pref]
>[   21.723979] pci 0000:02:00.3: BAR 6: assigned [mem 0x92bc0000-0x92bfffff pref]
>[   21.726289] pci 0000:00:1c.4: PCI bridge to [bus 02]
>[   21.727860] pci 0000:00:1c.4:   bridge window [mem 0x92b00000-0x92bfffff]
>[   21.730020] pci 0000:00:1c.4:   bridge window [mem 0x93900000-0x939fffff 64bit pref]
>[   21.732589] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[   21.735064] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff window]
>[   21.737315] pci_bus 0000:00: resource 6 [io  0x1000-0x9fff window]
>[   21.739313] pci_bus 0000:00: resource 7 [mem 0x90000000-0xc7ffbfff window]
>[   21.741516] pci_bus 8 [mem 0x38000000000-0x3bfffffffff window]
>[   22.243726] pci_bus 0000:07: resource 1 [mem 0x92c00000-0x938fffff]
>[   22.245783] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
>[   22.247602] pci_bus 0000:03: resource 1 [mem 0x93a00000-0x93bfffff]
>[   22.249616] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>[   22.251409] pci_bus 0000:01: resource 1 [mem 0x90000000-0x92afffff]
>[   22.253485] pci_bus 0000:02: resource 1 [mem 0x92b00000-0x92bfffff]
>[   22.255512] pci_bus 0000:02: resource 2 [mem 0x93900000-0x939fffff 64bit pref]
>[   22.258111] pci 0000:80:00.0: PCI bridge to [bus 81]
>[   22.259800] pci 0000:80:01.0: PCI bridge to [bus 8d]
>[   22.261427] pci 0000:80:01.1: PCI bridge to [bus 87]
>[   22.263120] pci 0000:80:02.0: PCI bridge to [bus 84]
>[   22.264745] pci 0000:80:02.1: PCI bridge to [bus 90]
>[   22.266363] pci 0000:80:02.2: PCI bridge to [bus 91]
>[   22.267950] pci 0000:80:02.3: PCI bridge to [bus 92]
>[   22.269566] pci 0000:80:03.0: PCI bridge to [bus 8a]
>[   22.271169] pci 0000:80:03.1: PCI bridge to [bus 93]
>[   22.272829] pci 0000:80:03.2: [bus 94]
>[   22.674366] pci 0000:80:03.3: PCI bridge to [bus 95]
>[   22.675988] pci_bus 0000:80: resource 4 [io  0xa000-0xffff window]
>[   22.677988] pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff window]
>[   22.680202] pci_bus 0000:80: resource 6 [mem 0x3c000000000-0x3ffffffffff window]
>[   22.683179] NET: Registered protocol family 2
>[   22.685694] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
>[   22.689595] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[   22.692319] TCP: Hash tables configured (established 524288 bind 65536)
>[   22.694827] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
>[   22.697266] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
>[   22.700229] NET: Registered protocol family 1
>[   22.706302] pci 0000:01:00.1: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[   22.710051] PCI: CLS 64 bytes, default 64
>[   22.711531] Unpacking initramfs...
>[   26.369096] Freeing initrd memory: 18236K
>[   26.370959] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[   26.373820] software IO TLB [mem 0x750ff000-0x790ff000] (64MB) mapped at [ffff9292b50ff000-ffff9292b90fefff]
>[   26.377116] Intel CQM monitoring enabled
>[   26.380440] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
>[   26.383140] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[   26.384967] RAPL PMU: hw unit of domain package 2^-14 Joules
>[   26.386813] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[   26.388561] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[   26.396563] Scanning for low memory corruption every 60 seconds
>[   26.400426] audit: initializing netlink subsys (disabled)
>[   26.402498] audit: type=2000 audit(1507291262.376:1): state=initialized audit_enabled=0 res=1
>[   26.404133] workingset: timestamp_bits=37 max_order=24 bucket_order=0
>[   26.406182] zbud: loaded
>[   26.413504] Key type asymmetric registered
>[   26.414899] Asymmetric key parser 'x509' registered
>[   26.416557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>[   26.419171] io scheduler noop registered
>[   26.420470] io scheduler deadline registered
>[   26.421973] io scheduler cfq registered (default)
>[   26.423704] io scheduler mq-deadline registered
>[   26.436164] pcieport 0000:00:01.0: Signaling PME with IRQ 25
>[   26.438240] pcieport 0000:00:01.1: Signaling PME with IRQ 26
>[   26.440101] pcieport 0000:00:02.0: Signaling PME with IRQ 28
>[   26.441958] pcieport 0000:00:02.1: Signaling PME with IRQ 29
>[   26.443844] pcieport 0000:00:02.2: Signaling PME with IRQ 30
>[   26.445689] pcieport 0000:00:02.3: Signaling PME with IRQ 31
>[   26.447535] pcieport 0000:00:03.0: Signaling PME with IRQ 33
>[   26.449371] pcieport 0000:00:03.1: Signaling PME with IRQ 34
>[   26.451202] pcieport 0000:00:03.2: Signaling PME with IRQ 35
>[   26.453139] pcieport 0000:00:03.3: Signaling PME with IRQ 36
>[   26.454952] pcieport 0000:00:1c.0: Signaling PME with IRQ 37
>[   26.456783] pcieport 0000:00:1c.2: Signaling PME with IRQ 38
>[   26.458626] pcieport 0000:00:1c.4: Signaling PME with IRQ 39
>[   26.460445] pcieport 0000:80:00.0: Signaling PME with IRQ 40
>[   26.462347] pcieport 0000:80:01.0: Signaling PME with IRQ 42
>[   26.464186] pcieport 0000:80:01.1: Signaling PME with IRQ 43
>[   26.466000] pcieport 0000:80:02.0: Signaling PME with IRQ 45
>[   26.467823] pcieport 0000:80:02.1: Signaling PME with IRQ 46
>[   26.469646] pcieport 0000:80:02.2: Signaling PME with IRQ 47
>[   26.471477] pcieport 0000:80:02.3: Signaling PME with IRQ 48
>[   26.473363] pcieport 0000:80:03.0: Signaling PME with IRQ 50
>[   26.475206] pcieport 0000:80:03.1: Signaling PME with IRQ 51
>[   26.477015] pcieport 0000:80:03.2: Signaling PME with IRQ 52
>[   26.478845] pcieport 0000:80:03.3: Signaling PME with IRQ 53
>[   26.480711] intel_idle: MWAIT substates: 0x2120
>[   26.482282] intel_idle: v0.4.1 model 0x3F
>[   26.488490] intel_idle: lapic_timer_reliable_states 0xffffffff
>[   26.492219] ERST: Error Record Serialization Table (ERST) support is initialized.
>[   26.494661] pstore: using lzo compression
>[   26.495979] pstore: Registered erst as persistent store backend
>[   26.498009] GHES: APEI firmware first mode is enabled by WHEA _OSC.
>[   26.500182] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[   26.522812] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[   26.545890] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
>[   26.549843] Non-volatile memory driver v1.3
>[   26.551276] Linux agpgart interface v0.103
>[   26.561656] ahci 0000:00:1f.2: version 3.0
>[   26.563715] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
>[   26.566376] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
>[   26.569753] scsi host0: ahci
>[   26.570934] scsi host1: ahci
>[   26.572116] scsi host2: ahci
>[   26.573276] scsi host3: a5] scsi host4: ahci
>[   27.075180] scsi host5: ahci
>[   27.076194] ata1: SATA max UDMA/133 abar m2048@0x93c00000 port 0x93c00100 irq 54
>[   27.078578] ata2: DUMMY
>[   27.079406] ata3: DUMMY
>[   27.080212] ata4: DUMMY
>[   27.080998] ata5: DUMMY
>[   27.081844] ata6: DUMMY
>[   27.082861] i8042: PNP: No PS/2 controller found.
>[   27.084454] i8042: Probing ports directly.
>[   27.087567] serio: i8042 KBD port at 0x60,0x64 irq 1
>[   27.089219] serio: i8042 AUX port at 0x60,0x64 irq 12
>[   27.091052] mousedev: PS/2 mouse device common for all mice
>[   27.093066] rtc_cmos 00:00: RTC can wake from S4
>[   27.094768] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
>[   27.096789] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[   27.102864] ledtrig-cpu: registered to indicate activity on CPUs
>[   27.104865] hidraw: raw HID events driver (C) Jiri Kosina
>[   27.107587] NET: Registered protocol family 10
>[   27.118165] Segment Routing with IPv6
>[   27code: sig=0x306f2, pf=0x1, revision=0x38
>[   27.397508] ata1: SATA link down (SStatus 0 SControl 300)
>[   27.407154] tsc: Refined TSC clocksource calibration: 2297.337 MHz
>[   27.407181] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x211d61a73c2, max_idle_ns: 440795283997 ns
>[   27.554221] microcode: Microcode Update Driver: v2.2.
>[   27.554446] registered taskstats version 1
>[   27.557695] zswap: loaded using pool lzo/zbud
>[   27.582595] Key type big_key registered
>[   27.586938] Key type encrypted registered
>[   27.588291] AppArmor: AppArmor sha1 policy hashing enabled
>[   27.592788]   Magic number: 5:707:25
>[   27.594481] memory memory65: hash matches
>[   27.596362] rtc_cmos 00:00: setting system clock to 2017-10-06 12:01:14 UTC (1507291274)
>[   27.599048] PM: Checking hibernation image partition /dev/disk/by-uuid/dea1a983-484e-4c91-accd-97e8750d64e1
>[   27.602302] PM: Hibernation image not present or could not be loaded.
>[   27.607726] Freeing unused kernel memory: 1828K
>[   27.646791] Write protecting the kernel read-only data: 14336k
>[   27.697133] Freeing unused kernel memory: 728K
>[   27.738585] Freeing unused kernel memory: 888K
>[   27.787619] ERST: [Firmware Warn]: Firmware does not respond in time.
>Mounting cgroup to /sys/fs/cgroup/rdma of type cgroup with options rdma.
>Mounting cgroup to /sys/fs/cgroup/net_cls,net_prio of type cgroup with options net_cls,net_prio.
>Mounting cgroup to /sys/fs/cgroup/memory of type cgroup with options memory.
>Mounting cgroup to /sys/fs/cgroup/devices of type cgroup with options devices.
>Mounting cgroup to /sys/fs/cgroup/cpuset of type cgroup with options cpuset.
>Mounting cgroup to /sys/fs/cgroup/cpu,cpuacct of type cgroup with options cpu,cpuacct.
>Mounting cgroup to /sys/fs/cgroup/hugetlb of type cgroup with options hugetlb.
>Mounting cgroup to /sys/fs/cgroup/freezer of type cgroup with options freezer.
>Mounting cgroup to /sys/fs/cgroup/blkio of type cgroup with options blkio.
>Mounting cgroup to /sys/fs/cgroup/pids of type cgroup with options pids.
>Mounting cgroup to /sys/fs/cgroup/perf_event of type cgroup with options perf_event.
>systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
>No virtua[   28.431486] clocksource: Switched to clocksource tsc
>lization found in DMI
>No virtualization found in CPUID
>Virtualization XEN not found, /proc/xen/capabilities does not exist
>This platform does not support /proc/device-tree
>No virtualization found in /proc/cpuinfo.
>This platform does not support /proc/sysinfo
>Found VM virtualization none
>Detected architecture x86-64.
>Running in initial RAM disk.
>
>Welcome to [0;34mopenSUSE Tumbleweed dracut-044-3.2 (Initramfs)[0m!
>
>No hostname configured.
>Set hostname to <localhost>.
>Failed to add address 127.0.0.1 to loopback interface: Success
>Failed to add address ::1 to loopback interface: Success
>Failed to bring loopback interface up: Success
>Unified cgroup hierarchy is located at /sys/fs/cgroup/unified. Controllers are on legacy hierarchies.
>Controller 'cpu' supported: yes
>Controller 'cpuacct' supported: yes
>Controller 'io' supported: no
>Controller 'blkio' supported: yes
>Controller 'memory' supported: yes
>Controller 'devices' supported: yes
>Controller 'pids' supported: yes
>Set up TFD_TIMER_CANCEL_ON_SET timerfd.
>Enabling showing of status.
>Spawned /usr/lib/systemd/system-generators/dracut-rootfs-generator as 613.
>Spawned /usr/lib/systemd/system-generators/systemd-fstab-generator as 614.
>Spawned /usr/lib/systemd/system-generators/systemd-gpt-auto-generator as 615.
>/usr/lib/systemd/system-generators/systemd-gpt-auto-generator succeeded.
>/usr/lib/systemd/system-generators/dracut-rootfs-generator succeeded.
>/usr/lib/systemd/system-generators/systemd-fstab-generator succeeded.
>system-generators succeeded.
>Looking for unit files in (higher priority first):
>	/run/systemd/transient
>	/run/systemd/system
>	/run/systemd/generator
>	/usr/lib/systemd/system
>Unit type .busname is not supported on this system.
>Using notification socket /run/systemd/notify
>Successfully created private D-Bus server.
>init.scope changed dead -> running
>-.mount: Changed dead -> mounted
>-.slice changed dead -> active
>Activating default unit: default.target
>run-systemd-journal-socket.mount: Failed to load configuration: No such file or directory
>run.mount: Failed to load configuration: No such file or directory
>run-systemd.mount: Failed to load configuration: No such file or directory
>run-systemd-journal.mount: Failed to load configuration: No such file or directory
>run-systemd-journal-stdout.mount: Failed to load configuration: No such file or directory
>systemd-hwdb-update.service: Failed to load configuration: No such file or directory
>run-udev.mount: Failed to load configuration: No such file or directory
>run-udev-control.mount: Failed to load configuration: No such file or directory
>systemd-sysusers.service: Failed to load configurati[   29.605495] random: fast init done
>on: No such file or directory
>run-systemd-ask\x2dpassword.mount: Failed to load configuration: No such file or directory
>plymouth-start.service: Failed to load configuration: No such file or directory
>lvm2-activation-early.service: Failed to load configuration: No such file or directory
>run-systemd-journal-syslog.mount: Failed to load configuration: No such file or directory
>syslog.service: Failed to load configuration: No such file or directory
>run-systemd-journal-dev\x2dlog.mount: Failed to load configuration: No such file or directory
>dev.mount: Failed to load configuration: No such file or directory
>dev-disk.mount: Failed to load configuration: No such file or directory
>dev-disk-by\x2duuid.mount: Failed to load configuration: No such file or directory
>dev-disk-by\x2duuid-3cf1d9fb\x2df2dd\x2d4ffe\x2d944b\x2d8d5b353d1daa.mount: Failed to load configuration: No such file or directory
>var-tmp.mount: Failed to load configuration: No such file or directory
>var.mount: Failed to load configuration: No such file or directory
>tmp.mount: Failed to load configuration: No such file or directory
>initrd.target: Trying to enqueue job initrd.target/start/isolate
>tmp.mount: Cannot add dependency job, ignoring: Unit tmp.mount not found.
>swap.target: Installed new job swap.target/start as 20
>dracut-pre-udev.service: Installed new job dracut-pre-udev.service/start as 49
>iscsiuio.socket: Installed new job iscsiuio.socket/start as 31
>systemd-journald-dev-log.socket: Installed new job systemd-journald-dev-log.socket/start as 24
>system.slice: Installed new job system.slice/start as 5
>dracut-initqueue.service: Installed new job dracut-initqueue.service/start as 44
>iscsid.service: Installed new job iscsid.service/start as 34
>remote-fs.target: Installed new job remote-fs.target/start as 54
>initrd-fs.target: Installed new job initrd-fs.target/start as 38
>dracut-cmdline.service: Installed new job dracut-cmdline.service/start as 37
>systemd-journald.socket: Installed new job systemd-journald.socket/start as 23
>kmod-static-nodes.service: Installed new job kmod-static-nodes.service/start as 19
>systemd-udevd.service: Installed new job systemd-udevd.service/start as 8
>systemd-udev-settle.service: Installed new job systemd-udev-settle.service/start as 17
>timers.target: Installed new job timers.target/start as 36
>systemd-modules-load.service: Installed new job systemd-modules-load.service/start as 4
>sysinit.target: Installed new job sysinit.target/start as 3
>dracut-cmdline-ask.service: Installed new job dracut-cmdline-ask.service/start as 52
>systemd-journald-audit.socket: Installed new job systemd-journald-audit.socket/start as 25
>paths.target: Installed new job paths.target/start as 35
>basic.target: Installed new job basic.target/start as 2
>systemd-tmpfiles-setup-dev.service: Installed new job systemd-tmpfiles-setup-dev.service/start as 21
>local-fs.target: Installed new job local-fs.target/start as 12
>local-fs-pre.target: Installed new job local-fs-pre.target/start as 18
>dracut-mount.service: Installed new job dracut-mount.service/start as 43
>systemd-sysctl.service: Installed new job systemd-sysctl.service/start as 13
>dracut-pre-mount.service: Installed new job dracut-pre-mount.service/start as 46
>systemd-ask-password-console.path: Installed new job systemd-ask-password-console.path/start as 15
>dracut-pre-trigger.service: Installed new job dracut-pre-trigger.service/start as 48
>initrd-root-device.target: Installed new job initrd-root-device.target/start as 50
>systemd-udevd-control.socket: Installed new job systemd-udevd-control.socket/start as 11
>iscsid.socket: Installed new job iscsid.socket/start as 30
>iscsiuio.service: Installed new job iscsiuio.service/start as 33
>systemd-udev-trigger.service: Installed new job systemd-udev-trigger.service/start as 14
>initrd-parse-etc.service: Installed new job initrd-parse-etc.service/start as 51
>systemd-udevd-kernel.socket: Installed new job systemd-udevd-kernel.socket/start as 9
>sysroot.mount: Installed new job sysroot.mount/start as 40
>dracut-pre-pivot.service: Installed new job dracut-pre-pivot.service/start as 53
>systemd-fsck-root.service: Installed new job systemd-fsck-root.service/start as 41
>multipathd.service: Installed new job multipathd.service/start as 16
>haveged.service: Installed new job haveged.service/start as 26
>slices.target: Installed new job slices.target/start as 32
>initrd-root-fs.target: Installed new job initrd-root-fs.target/start as 47
>sockets.target: Installed new job sockets.target/start as 29
>initrd.target: Installed new job initrd.target/start as 1
>systemd-journald.service: Installed new job systemd-journald.service/start as 22
>remote-fs-pre.target: Installed new job remote-fs-pre.target/start as 45
>dev-disk-by\x2duuid-3cf1d9fb\x2df2dd\x2d4ffe\x2d944b\x2d8d5b353d1daa.device: Installed new job dev-disk-by\x2duuid-3cf1d9fb\x2df2dd\x2d4ffe\x2d944b\x2d8d5b353d1daa.device/start as 39
>initrd.target: Enqueued job initrd.target/start as 1
>Loaded units and determined initial transaction in 1.9s.
>var-tmp.mount: Collecting.
>var.mount: Collecting.
>dev.mount: Collecting.
>dev-disk.mount: Collecting.
>dev-disk-by\x2duuid.mount: Collecting.
>dev-disk-by\x2duuid-3cf1d9fb\x2df2dd\x2d4ffe\x2d944b\x2d8d5b353d1daa.mount: Collecting.
>run-systemd-journal-dev\x2dlog.mount: Collecting.
>run-systemd-journal-syslog.mount: Collecting.
>run-systemd-ask\x2dpassword.mount: Collecting.
>run-udev.mount: Collecting.
>run-udev-control.mount: Collecting.
>run-systemd-journal-socke[   31.a: device handler registered
>t.mount: Collecting.
>run.mount: Collecting.
>run-systemd.mount: Collecting.
>run-systemd-journal.mount: Collecting.
>run-systemd-journal-stdout.mount: Collecting.
>Received SI[   32.085371] emc: device handler registered
>GCHLD from PID 612 (n/a).
>systemd-udevd-kernel.socket: ConditionPathIsReadWrite=/sys succeeded.
>systemd-udevd-kernel.socket: Changed dead -> listening
>systemd-udevd-kernel.socket: Job systemd-udevd-kernel.socket/start finished, result=done
>[[0;32m  OK  [0m] Listening on udev Kernel Socket.
>systemd-udevd-control.socket: ConditionPathIsReadWrite=/sys succeeded.
>systemd-udevd-control.socket: Changed dead -> listening
>systemd-udevd-control.socket: Job systemd-udevd-control.socket/start finished, result=done
>[[0;32m  OK  [0m] Listening on udev Control Socket.
>sy[   32.123247] rdac: device handler registered
>stemd-ask-password-console.path: ConditionPathExists=!/run/plymouth/pid succeeded.
>systemd-ask-password-console.path: Changed dead -> waiting
>systemd-ask-password-console.path: Job systemd-ask-password-console.path/start finished, result=done
>[[0;32m  OK  [0m] Started Dispatch Password Requests to Console Directory Watch.
>paths.target changed dead -> active
>paths.target: Job paths.target/start finished, result=done
>[[0;32m  OK  [0m] Reached target Paths.
>systemd-journald-audit.socket: ConditionCapability=CAP_AUDIT_READ succeeded.
>systemd-journald-audit.socket: ConditionSecurity=audit succeeded.
>systemd-journald-audit.socket: Changed dead -> listening
>systemd-journald-audit.socket: Job systemd-journald-audit.socket/start finished, result=done
>[[0;32m  OK  [0m] Listening on Journal Audit Socket.
>timers.target changed dead -> active
>timers.target: Job timers.target/start finished, result=done
>[[0;32m  OK  [0m] Reached target Timers.
>systemd-journald.socket: Changed dead -> listening
>systemd-journald.socket: Job systemd-journald.socket/start finished, result=done
>[[0;32m  OK  [0m] Listening on Journal Socket.
>system.slice changed dead -> active
>system.slice: Job system.slice/start finished, result=done
>[[0;32m  OK  [0m] Created slice System Slice.
>haveged.service: ConditionVirtualization=!container succeeded.
>haveged.service: Passing 0 fds to service
>haveged.service: About to execute: /usr/sbin/haveged -w 1024 -v 0 -F
>haveged.service: Forked /usr/sbin/haveged as 643
>haveged.service: Changed dead -> running
>haveged.service: Job haveged.service/start finished, result=done
>[[0;32m  OK  [0m] Started Entropy Daemon based on the HAVEGE algorithm.
>systemd-modules-load.service: ConditionKernelCommandLine=|rd.modules-load failed.
>systemd-modules-load.service: ConditionKernelCommandLine=|modules-load failed.
>systemd-modules-load.service: ConditionDirectoryNotEmpty=|/run/modules-load.d failed.
>systemd-modules-load.service: ConditionDirectoryNotEmpty=|/etc/modules-load.d failed.
>systemd-modules-load.service: ConditionDirectoryNotEmpty=|/usr/local/lib/modules-load.d failed.
>systemd-modules-load.service: ConditionDirectoryNotEmpty=|/usr/lib/modules-load.d succeeded.
>systemd-modules-load.service: ConditionDirectoryNotEmpty=|/lib/modules-load.d failed.
>systemd-modules-load.service: ConditionCapability=CAP_SYS_MODULE succeeded.
>systemd-modules-load.service: Passing 0 fds to service
>systemd-modules-load.service: About to execute: /usr/lib/systemd/systemd-modules-load
>systemd-modules-load.service: Forked /usr/lib/systemd/systemd-modules-load as 644
>systemd-modules-load.service: Changed dead -> start
>         Starting Load Kernel Modules...
>slices.target changed dead -> active
>slices.target: Job slices.target/start finished, result=done
>[[0;32m  OK  [0m] Reached target Slices.
>kmod-static-nodes.service: ConditionFileNotEmpty=/lib/modules/4.11.8-2-default/modules.devname succeeded.
>kmod-static-nodes.service: ConditionCapability=CAP_SYS_MODULE succeeded.
>kmod-static-nodes.service: Passing 0 fds to service
>kmod-static-nodes.service: About to execute: /usr/bin/kmod static-nodes --format=tmpfiles --output=/run/tmpfiles.d/kmod.conf
>systemd-modules-load.service: Executing: /usr/lib/systemd/systemd-modules-load
>kmod-static-nodes.service: Forked /usr/bin/kmod as 645
>haveged.service: Executing: /usr/sbin/haveged -w 1024 -v 0 -F
>kmod-static-nodes.service: Executing: /usr/bin/kmod static-nodes --format=tmpfiles --output=/run/tmpfiles.d/kmod.conf
>kmod-static-nodes.service: Changed dead -> start
>         Starting Create list of required stâ¦ce nodes for the current kernel...
>dracut-cmdline-ask.service: ConditionKernelCommandLine=rd.cmdline=ask failed.
>dracut-cmdline-ask.service: Starting requested but condition failed. Not starting unit.
>dracut-cmdline-ask.service: Job dracut-cmdline-ask.service/start finished, result=done
>dracut-cmdline.service: ConditionKernelCommandLine=|noresume failed.
>dracut-cmdline.service: ConditionKernelCommandLine=|resume succeeded.
>dracut-cmdline.service: ConditionKernelCommandLine=|rd.break=cmdline failed.
>dracut-cmdline.service: ConditionDirectoryNotEmpty=|/lib/dracut/hooks/cmdline succeeded.
>dracut-cmdline.service: ConditionPathExistsGlob=|/etc/cmdline.d/*.conf succeeded.
>dracut-cmdline.service: ConditionPathExists=/usr/lib/initrd-release succeeded.
>dracut-cmdline.service: Passing 0 fds to service
>dracut-cmdline.service: About to execute: /bin/dracut-cmdline
>dracut-cmdline.service: Forked /bin/dracut-cmdline as 649
>dracut-cmdline.service: Changed dead -> start
>         Starting dracut cmdline hook...
>systemd-journald-dev-log.socket: Changed dead -> listening
>systemd-journald-dev-log.socket: Job systemd-journald-dev-log.socket/start finished, result=done
>dracut-cmdline.service: Executing: /bin/dracut-cmdline
>[[0;32m  OK  [0m] Listening on Journal Socket (/dev/log).
>systemd-journald.service: Passing 4 fds to service
>systemd-journald.service: About to execute: /usr/lib/systemd/systemd-journald
>systemd-journald.service: Forked /usr/lib/systemd/systemd-journald as 650
>systemd-journald.service: Changed dead -> start
>         Starting Journal Service...
>swap.target changed dead -> active
>swap.target: Job swap.target/start finished, result=done
>[[0;32m  OK  [0m] Reached target Swap.
>libmount event [rescan: no]
>Received SIGCHLD from PID 6[  ndom: crng init done
>44 (systemd-modules).
>Child 644 (systemd-modules) died (code=exited, status=0/SUCCESS)
>systemd-modules-load.service: Child 644 belongs to systemd-modules-load.service
>systemd-modules-load.service: Main process exited, code=exited, status=0/SUCCESS
>systemd-modules-load.service: Changed start -> exited
>systemd-modules-load.service: Job systemd-modules-load.service/start finished, result=done
>[[0;32m  OK  [0m] Started Load Kernel Modules.
>Child 645 (kmod) died (code=exited, status=0/SUCCESS)
>kmod-static-nodes.service: Child 645 belongs to kmod-static-nodes.service
>kmod-static-nodes.service: Main process exited, code=exited, status=0/SUCCESS
>kmod-static-nodes.service: Changed start -> exited
>kmod-static-nodes.service: Job kmod-static-nodes.service/start finished, result=done
>[[0;32m  OK  [0m] Started Create list of required staâ¦vice nodes for the current kernel.
>systemd-udevd-kernel.socket: Incoming traffic
>systemd-udevd-kernel.socket: Changed listening -> running
>systemd-journald.socket: Incoming traffic
>systemd-journald.socket: Changed listening -> running
>systemd-tmpfiles-setup-dev.service: ConditionCapability=CAP_SYS_MODULE succeeded.
>systemd-tmpfiles-setup-dev.service: Passing 0 fds to service
>systemd-tmpfiles-setup-dev.service: About to execute: /usr/bin/systemd-tmpfiles --prefix=/dev --create --boot
>systemd-tmpfiles-setup-dev.service: Forked /usr/bin/systemd-tmpfiles as 651
>systemd-tmpfiles-setup-dev.service: Changed dead -> start
>         Starting Create Static Device Nodes in /dev...
>systemd-sysctl.service: ConditionPathIsReadWrite=/proc/sys/net/ succeeded.
>systemd-journald.service: Executing: /usr/lib/systemd/systemd-journald
>systemd-sysctl.service: Passing 0 fds to service
>systemd-sysctl.service: About to execute: /usr/lib/systemd/systemd-sysctl
>systemd-tmpfiles-setup-dev.service: Executing: /usr/bin/systemd-tmpfiles --prefix=/dev --create --boot
>systemd-sysctl.service: Forked /usr/lib/systemd/systemd-sysctl as 654
>systemd-sysctl.service: Changed dead -> start
>         Starting Apply Kernel Variables...
>systemd-sysctl.service: Executing: /usr/lib/systemd/systemd-sysctl
>systemd-tmpfiles-setup-dev.service: cgroup is empty
>Received SIGCHLD from PID 651 (systemd-tmpfile).
>Child 651 (systemd-tmpfile) died (code=exited, status=0/SUCCESS)
>systemd-tmpfiles-setup-dev.service: Child 651 belongs to systemd-tmpfiles-setup-dev.service
>systemd-tmpfiles-setup-dev.service: Main process exited, code=exited, status=0/SUCCESS
>systemd-tmpfiles-setup-dev.service: Changed start -> exited
>systemd-tmpfiles-setup-dev.service: Job systemd-tmpfiles-setup-dev.service/start finished, result=done
>[[0;32m  OK  [0m] Started Create Static Device Nodes in /dev.
>systemd-sysctl.service: cgroup is empty
>Received SIG[   35.240520vice-mapper: uevent: version 1.0.3
>CHLD from PID 654 (systemd-sysctl).
>Child 654 (systemd-sysctl) [   35.740377] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
>died (code=exited, status=0/SUCCESS)
>systemd-sysctl.service: Child 654 belongs to systemd-sysctl.service
>systemd-sysctl.service: Main process exited, code=exited, status=0/SUCCESS
>systemd-sysctl.service: Changed start -> exited
>systemd-sysctl.service: Job systemd-sysctl.service/start finished, result=done
>[[0;32m  OK  [0m] Started Apply Kernel Variables.
>Child 649 (dracut-cmdline) died (code=exited, status=0/SUCCESS)
>dracut-cmdline.service: Child 649 belongs to dracut-cmdline.service
>dracut-cmdline.service: Main process exited, code=exited, status=0/SUCCESS
>dracut-cmdline.service: Changed start -> exited
>dracut-cmdline.service: Job dracut-cmdline.service/start finished, result=done
>[[0;32m  OK  [0m] Started dracut cmdline hook.
>systemd-journald.service: Got notification message from PID 650 (READY=1, STATUS=Processing requests...)
>systemd-journald.service: Changed start -> running
>systemd-journald.service: Job systemd-journald.service/start finished, result=done
>[[0;32m  OK  [0m] Started Journal Service.
>systemd-journald-audit.socket: Changed listening -> running
>systemd-journald-dev-log.socket: Changed listening -> running
>systemd-journald.service: Got notification message from PID 650 (WATCHDOG=1)
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 33 (n/a) to fd store.
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 34 (n/a) to fd store.
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 35 (n/a) to fd store.
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 36 (n/a) to fd store.
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 37 (n/a) to fd store.
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 38 (n/a) to fd store.
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 39 (n/a) to fd store.
>Received SIGCHLD from PID 649 (n/a).
>systemd-journald.service: Received EPOLLHUP on stored fd 34 (stored), closing.
>systemd-journald.service: Received EPOLLHUP on stored fd 35 (stored), closing.
>systemd-journald.service: Received EPOLLHUP on stored fd 36 (stored), closing.
>systemd-journald.service: Received EPOLLHUP on stored fd 37 (stored), closing.
>systemd-journald.service: Received EPOLLHUP on stored fd 38 (stored), closing.
>systemd-journald.service: Received EPOLLHUP on stored fd 39 (stored), closing.
>dracut-pre-udev.service: ConditionKernelCommandLine=|rd.driver.post failed.
>dracut-pre-udev.service: ConditionKernelCommandLine=|rd.driver.pre failed.
>dracut-pre-udev.service: ConditionKernelCommandLine=|rd.driver.blacklist failed.
>dracut-pre-udev.service: ConditionKernelCommandLine=|rd.break=pre-udev failed.
>dracut-pre-udev.service: ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-udev succeeded.
>dracut-pre-udev.service: ConditionPathExists=|/etc/cmdline.d/20-force_drivers.conf failed.
>dracut-pre-udev.service: ConditionPathExists=/usr/lib/initrd-release succeeded.
>dracut-pre-udev.service: Passing 0 fds to service
>dracut-pre-udev.service: About to execute: /bin/dracut-pre-udev
>dracut-pre-udev.service: Forked /bin/dracut-pre-udev as 742
>dracut-pre-udev.service: Changed dead -> start
>         Starting dracut pre-udev hook...
>dracut-pre-udev.service: Executing: /bin/dracut-pre-udev
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 34 (n/a) to fd store.
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 35 (n/a) to fd store.
>systemd-journald.service: Received EPOLLHUP on stored fd 35 (stored), closing.
>Received SIGCHLD from PID 742 (dracut-pre-udev).
>Child 742 (dracut-pre-udev) died (code=exited, status=0/SUCCESS)
>dracut-pre-udev.service: Child 742 belongs to dracut-pre-udev.service
>dracut-pre-udev.service: Main process exited, code=exited, status=0/SUCCESS
>dracut-pre-udev.service: Changed start -> exited
>dracut-pre-udev.service: Job dracut-pre-udev.service/start finished, result=done
>[[0;32m  OK  [0m] Started dracut pre-udev hook.
>systemd-journald.service: Received EPOLLHUP on stored fd 34 (stored), closing.
>systemd-udevd.service: ConditionPathIsReadWrite=/sys succeeded.
>systemd-udevd.service: Passing 2 fds to service
>systemd-udevd.service: About to execute: /usr/lib/systemd/systemd-udevd
>systemd-udevd.service: Forked /usr/lib/systemd/systemd-udevd as 781
>systemd-udevd.service: Changed dead -> start
>         Starting udev Kernel Device Manager...
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 34 (n/a) to fd store.
>systemd-udevd.service: Executing: /usr/lib/systemd/systemd-udevd
>systemd-udevd.service: Got notification message from PID 781 (WATCHDOG=1)
>systemd-udevd.service: Got notification message from PID 781 (READY=1, STATUS=Processing with 4616 children at max)
>systemd-udevd.service: Changed start -> running
>systemd-udevd.service: Job systemd-udevd.service/start finished, result=done
>[[0;32m  OK  [0m] Started udev Kernel Device Manager.
>systemd-udevd-control.socket: Changed listening -> running
>dracut-pre-trigger.service: ConditionKernelCommandLine=|rd.break=pre-trigger failed.
>dracut-pre-trigger.service: ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-trigger succeeded.
>dracut-pre-trigger.service: ConditionPathExists=/usr/lib/initrd-release succeeded.
>dracut-pre-trigger.service: Passing 0 fds to service
>dracut-pre-trigger.service: About to execute: /bin/dracut-pre-trigger
>dracut-pre-trigger.service: Forked /bin/dracut-pre-trigger as 787
>dracut-pre-trigger.service: Changed dead -> start
>         Starting dracut pre-trigger hook...
>systemd-journald.service: Got notification message from PID 6[   37.968499] Loading iSCSI transport class v2.0-870.
>50 (FDSTORE=1)
>[   37.968696] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.65
>systemd-journald[   37.969066] qlcnic 0000:07:00.0: 2048KB memory map
>.service: Added [   38.113680] qlcnic 0000:07:00.0: Default minidump capture mask 0x1f
>fd 35 (n/a) to f[   38.113683] qlcnic 0000:07:00.0: FW dump enabled
>d store.
>dracut[   38.113685] qlcnic 0000:07:00.0: Supports FW dump capability
>-pre-trigger.ser[   38.113688] qlcnic 0000:07:00.0: Driver v5.3.65, firmware v4.16.34
>vice: Executing:[   38.144568] qlcnic: 00:0e:1e:06:59:08: 8200 Series Dual Port 10GbE Converged Network Adapter(TCP/IP Networking) Board Chip rev 0x54
> /bin/dracut-pre[   38.301234] qlcnic 0000:07:00.0: using msi-x interrupts
>-trigger
>system[   38.379222] qlcnic 0000:07:00.0: eth0: XGbE port initialized
>d-journald.servi[   38.379577] qlcnic 0000:07:00.1: 2048KB memory map
>ce: Got notifica[   38.426634] qlcnic 0000:07:00.1: Default minidump capture mask 0x1f
>tion message fro[   38.426636] qlcnic 0000:07:00.1: FW dump enabled
>m PID 650 (FDSTO[   38.426638] qlcnic 0000:07:00.1: Supports FW dump capability
>RE=1)
>systemd-j[   38.426641] qlcnic 0000:07:00.1: Driver v5.3.65, firmware v4.16.34
>ournald.service: Added fd 36 (n/a) to fd store.
>systemd-udevd.service: Got notification message from PID 781 (RELOADING=1, STATUS=Flushing configuration...)
>systemd-udevd.service: Changed running -> reload
>systemd-udevd.service: Got notification message from PID 781 (READY=1, STATUS=Processing with 4616 children at max)
>systemd-udevd.service: Changed reload -> running
>systemd-journald.service: Received EPOLLHUP on stored fd 36 (stored), closing.
>Received SIGCHLD from PID 787 (dracut-pr[   39.001756] HP HPSA Driver (v 3.4.16-0)
>e-trig).
>Child [   39.034449] hpsa 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>787 (dracut-pre-trig) died (code=exited, status=0/SUCCESS)
>dracut-pre-trigger.service: Child 787 belongs to dracut-pre-trigger.service
>dracut-pre-trigger.service: Main process exited, code=exited, status=0/SUCCESS
>dracut-pre-trigger.service: Changed start -> exited
>dracut-pre-trigger.service: Job dracut-pre-trigger.service/start finished, result=done
>[[0;32m  OK  [0m] Started dracut pre-trigger hook.
>systemd-journald.service: Received EPOLLHUP on stored fd 35 (stored)[   39.098580] hpsa 0000:03:00.0: Logical aborts not supported
>, closing.
>systemd-udev-trigger.service: ConditionPathIsReadWrite=/sys succeeded.
>systemd-udev[   39.147717] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 9.00.00.00-k.
>-trigger.service[   39.207162] scsi host6: hpsa
>: Passing 0 fds [   39.215887] hpsa 0000:03:00.0: scsi 6:0:0:0: added RAID              HP       P440ar           controller SSDSmartPathCap- En- Exp=1
>to service
>syst[   39.215891] hpsa 0000:03:00.0: scsi 6:0:1:0: masked Direct-Access     HP       EG0300FCSPH      PHYS DRV SSDSmartPathCap- En- Exp=0
>emd-udev-trigger[   39.215895] hpsa 0000:03:00.0: scsi 6:0:2:0: masked Direct-Access     HP       EG0300FCSPH      PHYS DRV SSDSmartPathCap- En- Exp=0
>.service: About [   39.215898] hpsa 0000:03:00.0: scsi 6:1:0:0: added Direct-Access     HP       LOGICAL VOLUME   RAID-0 SSDSmartPathCap- En- Exp=1
>to execute: /usr[   39.215901] hpsa 0000:03:00.0: scsi 6:1:0:1: added Direct-Access     HP       LOGICAL VOLUME   RAID-0 SSDSmartPathCap- En- Exp=1
>/bin/udevadm tri[   39.217441] scsi 6:0:0:0: RAID              HP       P440ar           1.14 PQ: 0 ANSI: 5
>gger --type=subs[   39.543385] scsi 6:0:0:0: Attached scsi generic sg0 type 12
>ystems --action=[   39.544104] scsi 6:1:0:0: Direct-Access     HP       LOGICAL VOLUME   1.14 PQ: 0 ANSI: 5
>add
>systemd-udev-trigger.service: Forked /usr/bin/udevadm as 791
>systemd-udev-trigger.service: Changed dead -> start
>        [   40.026782] ACPI: bus type USB registered
> Starting udev C[   40.060901] usbcore: registered new interface driver usbfs
>oldplug all Devi[   40.060982] pps_core: LinuxPPS API ver. 1 registered
>ces...
>systemd-[   40.060983] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>journald.service[   40.063359] sd 6:1:0:0: Attached scsi generic sg1 type 0
>[   40.063447] sd 6:1:0:0: [sda] 585871964 512-byte logical blocks: (300 GB/279 GiB)
>[   40.063493] sd 6:1:0:0: [sda] Write Protect is off
>: Got notificati[   40.063495] sd 6:1:0:0: [sda] Mode Sense: 73 00 00 08
>[   40.063561] sd 6:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[   40.064064] scsi 6:1:0:1: Direct-Access     HP       LOGICAL VOLUME   1.14 PQ: 0 ANSI: 5
>[   40.075490]  sda: sda1 sda2 sda3
>[   40.076167] sd 6:1:0:0: [sda] Attached SCSI disk
>[   40.206268] qlcnic 0000:07:00.1: using msi-x interrupts
>on message from [   40.206638] qlcnic 0000:07:00.1: eth1: XGbE port initialized
>PID 650 (FDSTORE[   40.206995] qla2xxx [0000:07:00.6]-001d: : Found an ISP8021 irq 16 iobase 0xffffb1f2ca6bf000.
>[   40.250217] qla2xxx [0000:07:00.6]-009b:7: Device state is 0x3 = Ready.
>[   40.250221] qla2xxx [0000:07:00.6]-009d:7: Device state is 0x3 = Ready.
>=1)
>systemd-jou[   40.379789] qla2xxx [0000:07:00.6]-b04a:7: MiniDump Template size obtained (36 KB)
>[   40.399494] qla2xxx [0000:07:00.6]-b04c:7: MiniDump memory allocated (4023 KB)
>rnald.service: A[   40.479168] scsi host7: qla2xxx
>[   40.503394] sd 6:1:0:1: Attached scsi generic sg2 type 0
>[   40.503466] sd 6:1:0:1: [sdb] 585871964 512-byte logical blocks: (300 GB/279 GiB)
>[   40.503500] sd 6:1:0:1: [sdb] Write Protect is off
>[   40.503503] sd 6:1:0:1: [sdb] Mode Sense: 73 00 00 08
>[   40.503563] sd 6:1:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>dded fd 35 (n/a)[   40.504110]  sdb: sdb1 sdb2
> to fd store.
>s[   40.504741] sd 6:1:0:1: [sdb] Attached SCSI disk
>[   40.677957] qla2xxx [0000:07:00.6]-500a:7: LOOP UP detected (10 Gbps).
>[   40.683081] qlcnic 0000:07:00.0 ens2f0: renamed from eth0
>[   41.239275] qlcnic 0000:07:00.1 ens2f1: renamed from eth1
>[   41.407204] qla2xxx [0000:07:00.6]-00fb:7: QLogic QLE8242 - QLogic PCI-Express Dual Port 10Gb CNA.
>[   41.407212] qla2xxx [0000:07:00.6]-00fc:7: ISP8021: PCIe (5.0GT/s x8) @ 0000:07:00.6 hdma+ host#=7 fw=4.16.34 (804).
>ystemd-udev-trig[   41.407459] qla2xxx [0000:07:00.7]-001d: : Found an ISP8021 irq 16 iobase 0xffffb1f2cacbf800.
>[   41.409659] PTP clock support registered
>[   41.450813] qla2xxx [0000:07:00.7]-009b:8: Device state is 0x3 = Ready.
>[   41.450816] qla2xxx [0000:07:00.7]-009d:8: Device state is 0x3 = Ready.
>[   41.499187] scsi 7:0:0:0: Direct-Access     LSI      INF-01-00        0784 PQ: 0 ANSI: 5
>[   41.551110] qla2xxx [0000:07:00.7]-b04a:8: MiniDump Template size obtained (36 KB)
>[   41.571415] qla2xxx [0000:07:00.7]-b04c:8: MiniDump memory allocated (4023 KB)
>[   41.651078] scsi host8: qla2xxx
>[   41.835269] scsi 7:0:0:0: alua: supports implicit and explicit TPGS
>[   41.835276] scsi 7:0:0:0: alua: device naa.60080e500017c4160000a0be52809f3a port group 0 rel port 2
>ger.service: Exe[   41.835537] sd 7:0:0:0: Attached scsi generic sg3 type 0
>[   41.839293] sd 7:0:0:0: [sdc] Disabling DIF Type 1 protection
>cuting: /usr/bin[   41.839968] scsi 7:0:0:7: Direct-Access     LSI      Universal Xport  0784 PQ: 0 ANSI: 5
>/udevadm trigger[   41.840732] sd 7:0:0:0: [sdc] 67108864 512-byte logical blocks: (34.4 GB/32.0 GiB)
> --type=subsystems --action=add
>systemd-udev-trigger.service: cgroup is empty
>Received SIGCHLD from PID 791 (udevadm).
>Child 791 (udevadm) di[   41.841077] sd 7:0:0:0: [sdc] Write Protect is off
>ed (code=exited,[   41.841080] sd 7:0:0:0: [sdc] Mode Sense: 83 00 10 08
> status=0/SUCCESS)
>systemd-udev[   41.841334] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
>-trigger.service: Child 791 belo[   41.849541] sd 7:0:0:0: alua: transition timeout set to 60 seconds
>ngs to systemd-u[   41.849546] sd 7:0:0:0: alua: port group 00 state N non-preferred supports TolUsNA
>dev-trigger.serv[   41.852480]  sdc: sdc1
>ice
>systemd-udev-trigger.service: Main process [   41.855021] sd 7:0:0:0: [sdc] Attached SCSI disk
>exited, code=exited, status=0/SUCCESS
>systemd-udev-trigger.service: Running nex[   42.081333] iscsi: registered transport (qla4xxx)
>t main command for state start.
[   42.171322] scsi 7:0:0:7: Attached scsi generic sg4 type 0
>
>systemd-udev-tr[   42.173356] scsi 7:0:1:0: Direct-Access     LSI      INF-01-00        0784 PQ: 0 ANSI: 5
>igger.service: Passing 0 fds to [   42.530744] tg3.c:v3.137 (May 11, 2014)
>service
>systemd[   42.572257] scsi 7:0:1:0: alua: supports implicit and explicit TPGS
>-udev-trigger.se[   42.572263] scsi 7:0:1:0: alua: device naa.60080e500017c4160000a0be52809f3a port group 0 rel port 1
>[   42.572524] sd 7:0:1:0: Attached scsi generic sg5 type 0
>[   42.615675] sd 7:0:1:0: alua: port group 00 state N non-preferred supports TolUsNA
>rvice: About to [   42.741975] sd 7:0:1:0: [sdd] Disabling DIF Type 1 protection
>[   42.741979] scsi 7:0:1:7: Direct-Access     LSI      Universal Xport  0784 PQ: 0 ANSI: 5
>[   42.908335] sd 7:0:1:0: [sdd] 67108864 512-byte logical blocks: (34.4 GB/32.0 GiB)
>execute: /usr/bi[   42.954265] sd 7:0:1:0: [sdd] Write Protect is off
>[   42.954267] sd 7:0:1:0: [sdd] Mode Sense: 83 00 10 08
>[   42.971295] scsi 7:0:1:7: Attached scsi generic sg6 type 0
>n/udevadm trigge[   43.024041] scsi 7:0:2:0: Direct-Access     DGC      VRAID            0430 PQ: 0 ANSI: 4
>[   43.024061] sd 7:0:1:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
>[   43.031556] tg3 0000:02:00.0 eth0: Tigon3 [partno(N/A) rev 5719001] (PCI Express) MAC address 9c:b6:54:af:d6:04
>[   43.031559] tg3 0000:02:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
>r --type=devices[   43.031562] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
>[   43.031564] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
>[   43.034118]  sdd: sdd1
>[   43.036978] sd 7:0:1:0: [sdd] Attached SCSI disk
>[   43.216889] tg3 0000:02:00.1 eth1: Tigon3 [partno(N/A) rev 5719001] (PCI Express) MAC address 9c:b6:54:af:d6:05
> --action=add
>s[   43.216892] tg3 0000:02:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
>[   43.216895] tg3 0000:02:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
>[   43.216897] tg3 0000:02:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
>[   43.303154] scsi 7:0:2:0: alua: supports implicit and explicit TPGS
>[   43.303160] scsi 7:0:2:0: alua: device naa.600601600a30200024fbbaf3f500e411 port group 1 rel port 5
>[   43.303459] sd 7:0:2:0: Attached scsi generic sg7 type 0
>[   43.305232] scsi 7:0:2:1: Direct-Access     DGC      VRAID            0430 PQ: 0 ANSI: 4
>[   43.305478] sd 7:0:2:0: [sde] 268435456 512-byte logical blocks: (137 GB/128 GiB)
>[   43.305794] sd 7:0:2:0: [sde] Write Protect is off
>ystemd-udev-trig[   43.305797] sd 7:0:2:0: [sde] Mode Sense: 87 00 00 08
>[   43.306193] sd 7:0:2:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[   43.310125]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9
>[   43.312681] sd 7:0:2:0: [sde] Attached SCSI disk
>[   43.315484] sd 7:0:2:0: alua: transition timeout set to 60 seconds
>[   43.315490] sd 7:0:2:0: alua: port group 01 state A preferred supports tolUsNA
>[   43.440673] tg3 0000:02:00.2 eth2: Tigon3 [partno(N/A) rev 5719001] (PCI Express) MAC address 9c:b6:54:af:d6:06
>[   43.440676] tg3 0000:02:00.2 eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
>[   43.440679] tg3 0000:02:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
>[   43.440681] tg3 0000:02:00.2 eth2: dma_rwctrl[00000001] dma_mask[64-bit]
>[   43.636656] tg3 0000:02:00.3 eth3: Tigon3 [partno(N/A) rev 5719001] (PCI Express) MAC address 9c:b6:54:af:d6:07
>[   43.636659] tg3 0000:02:00.3 eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
>[   43.636661] tg3 0000:02:00.3 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
>[   43.636663] tg3 0000:02:00.3 eth3: dma_rwctrl[00000001] dma_mask[64-bit]
>[   43.759091] scsi 7:0:2:1: alua: supports implicit and explicit TPGS
>[   43.759098] scsi 7:0:2:1: alua: device naa.600601600a3020002282d7e2c5a6e411 port group 1 rel port 5
>ger.service: For[   43.759392] sd 7:0:2:1: Attached scsi generic sg8 type 0
>[   43.760348] scsi 7:0:3:0: Direct-Access     DGC      VRAID            0430 PQ: 0 ANSI: 4
>[   43.771526] sd 7:0:2:1: alua: transition timeout set to 60 seconds
>[   43.771532] sd 7:0:2:1: alua: port group 01 state A preferred supports tolUsNA
>[   43.772629] sd 7:0:2:1: [sdf] 67108864 512-byte logical blocks: (34.4 GB/32.0 GiB)
>[   43.772720] sd 7:0:2:1: [sdf] Write Protect is off
>[   43.772723] sd 7:0:2:1: [sdf] Mode Sense: 87 00 00 08
>[   43.772891] sd 7:0:2:1: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[   43.777572] sd 7:0:2:1: [sdf] Attached SCSI disk
>[   43.848328] tg3 0000:02:00.1 eno2: renamed from eth1
>[   44.055478] tg3 0000:02:00.3 eno4: renamed from eth3
>[   44.115174] scsi 7:0:3:0: alua: supports implicit and explicit TPGS
>[   44.115180] scsi 7:0:3:0: alua: device naa.600601600a30200024fbbaf3f500e411 port group 2 rel port f
>[   44.115432] sd 7:0:3:0: Attached scsi generic sg9 type 0
>ked /usr/bin/ude[   44.117421] sd 7:0:3:0: [sdg] 268435456 512-byte logical blocks: (137 GB/128 GiB)
>[   44.117436] scsi 7:0:3:1: Direct-Access     DGC      VRAID            0430 PQ: 0 ANSI: 4
>vadm as 792
>sys[   44.117528] sd 7:0:3:0: [sdg] Write Protect is off
>[   44.117531] sd 7:0:3:0: [sdg] Mode Sense: 87 00 00 08
>[   44.118145] sd 7:0:3:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>temd-journald.se[   44.123135]  sdg: sdg1 sdg2 sdg3 sdg4 sdg5 sdg6 sdg7 sdg8 sdg9
>rvice: Received [   44.125548] sd 7:0:3:0: [sdg] Attached SCSI disk
>[   44.127569] sd 7:0:3:0: alua: transition timeout set to 60 seconds
>[   44.127575] sd 7:0:3:0: alua: port group 02 state N non-preferred supports tolUsNA
>EPOLLHUP on stor[   44.207264] tg3 0000:02:00.0 eno1: renamed from eth0
>[   44.463270] tg3 0000:02:00.2 eno3: renamed from eth2
>[   44.587100] scsi 7:0:3:1: alua: supports implicit and explicit TPGS
>[   44.587106] scsi 7:0:3:1: alua: device naa.600601600a3020002282d7e2c5a6e411 port group 2 rel port f
>ed fd 35 (stored[   44.587403] sd 7:0:3:1: Attached scsi generic sg10 type 0
>), closing.
>sys[   44.588264] scsi 7:0:4:0: Direct-Access     DGC      VRAID            0430 PQ: 0 ANSI: 4
>temd-journald.se[   44.599807] sd 7:0:3:1: alua: transition timeout set to 60 seconds
>rvice: Got notif[   44.599813] sd 7:0:3:1: alua: port group 02 state N non-preferred supports tolUsNA
>[   44.600906] sd 7:0:3:1: [sdh] 67108864 512-byte logical blocks: (34.4 GB/32.0 GiB)
>[   44.600996] sd 7:0:3:1: [sdh] Write Protect is off
>[   44.600998] sd 7:0:3:1: [sdh] Mode Sense: 87 00 00 08
>[   44.601208] sd 7:0:3:1: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[   44.605853] sd 7:0:3:1: [sdh] Attached SCSI disk
>[   44.931128] scsi 7:0:4:0: alua: supports implicit and explicit TPGS
>[   44.931134] scsi 7:0:4:0: alua: device naa.600601600a30200024fbbaf3f500e411 port group 2 rel port d
>[   44.931397] sd 7:0:4:0: Attached scsi generic sg11 type 0
>[   44.933344] scsi 7:0:4:1: Direct-Access     DGC      VRAID            0430 PQ: 0 ANSI: 4
>[   44.933737] sd 7:0:4:0: [sdi] 268435456 512-byte logical blocks: (137 GB/128 GiB)
>[   44.934012] sd 7:0:4:0: [sdi] Write Protect is off
>[   44.934015] sd 7:0:4:0: [sdi] Mode Sense: 87 00 00 08
>[   44.934491] sd 7:0:4:0: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[   44.939669]  sdi: sdi1 sdi2 sdi3 sdi4 sdi5 sdi6 sdi7 sdi8 sdi9
>[   44.942483] sd 7:0:4:0: [sdi] Attached SCSI disk
>[   44.947695] sd 7:0:4:0: alua: port group 02 state N non-preferred supports tolUsNA
>[   45.323040] scsi 7:0:4:1: alua: supports implicit and explicit TPGS
>[   45.323046] scsi 7:0:4:1: alua: device naa.600601600a3020002282d7e2c5a6e411 port group 2 rel port d
>ication message [   45.323315] sd 7:0:4:1: Attached scsi generic sg12 type 0
>from PID 650 (FD[   45.324269] scsi 7:0:5:0: Direct-Access     DGC      VRAID            0430 PQ: 0 ANSI: 4
>[   45.335594] sd 7:0:4:1: alua: port group 02 state N non-preferred supports tolUsNA
>[   45.336700] sd 7:0:4:1: [sdj] 67108864 512-byte logical blocks: (34.4 GB/32.0 GiB)
>[   45.336795] sd 7:0:4:1: [sdj] Write Protect is off
>STORE=1)
>system[   45.336797] sd 7:0:4:1: [sdj] Mode Sense: 87 00 00 08
>[   45.336973] sd 7:0:4:1: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[   45.341636] sd 7:0:4:1: [sdj] Attached SCSI disk
>[   45.735138] scsi 7:0:5:0: alua: supports implicit and explicit TPGS
>[   45.735145] scsi 7:0:5:0: alua: device naa.600601600a30200024fbbaf3f500e411 port group 1 rel port 7
>[   45.735375] sd 7:0:5:0: Attached scsi generic sg13 type 0
>[   45.737199] scsi 7:0:5:1: Direct-Access     DGC      VRAID            0430 PQ: 0 ANSI: 4
>[   45.737507] sd 7:0:5:0: [sdk] 268435456 512-byte logical blocks: (137 GB/128 GiB)
>[   45.737831] sd 7:0:5:0: [sdk] Write Protect is off
>[   45.737834] sd 7:0:5:0: [sdk] Mode Sense: 87 00 00 08
>[   45.738226] sd 7:0:5:0: [sdk] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[   45.742018]  sdk: sdk1 sdk2 sdk3 sdk4 sdk5 sdk6 sdk7 sdk8 sdk9
>[   45.744507] sd 7:0:5:0: [sdk] Attached SCSI disk
>[   45.747518] sd 7:0:5:0: alua: port group 01 state A preferred supports tolUsNA
>[   46.115069] scsi 7:0:5:1: alua: supports implicit and explicit TPGS
>[   46.115076] scsi 7:0:5:1: alua: device naa.600601600a3020002282d7e2c5a6e411 port group 1 rel port 7
>[   46.115334] sd 7:0:5:1: Attached scsi generic sg14 type 0
>[   46.117447] scsi 7:0:6:0: Direct-Access     LSI      INF-01-00        0784 PQ: 0 ANSI: 5
>[   46.127474] sd 7:0:5:1: alua: port group 01 state A preferred supports tolUsNA
>[   46.128586] sd 7:0:5:1: [sdl] 67108864 512-byte logical blocks: (34.4 GB/32.0 GiB)
>[   46.128680] sd 7:0:5:1: [sdl] Write Protect is off
>[   46.128682] sd 7:0:5:1: [sdl] Mode Sense: 87 00 00 08
>[   46.128847] sd 7:0:5:1: [sdl] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[   46.134065] sd 7:0:5:1: [sdl] Attached SCSI disk
>[   46.407143] scsi 7:0:6:0: alua: supports implicit and explicit TPGS
>[   46.407149] scsi 7:0:6:0: alua: device naa.60080e500017c4160000a0be52809f3a port group 1 rel port 8001
>[   46.407380] sd 7:0:6:0: Attached scsi generic sg15 type 0
>[   46.410919] sd 7:0:6:0: [sdm] Disabling DIF Type 1 protection
>[   46.411664] scsi 7:0:6:7: Direct-Access     LSI      Universal Xport  0784 PQ: 0 ANSI: 5
>[   46.412279] sd 7:0:6:0: [sdm] 67108864 512-byte logical blocks: (34.4 GB/32.0 GiB)
>[   46.412625] sd 7:0:6:0: [sdm] Write Protect is off
>[   46.412627] sd 7:0:6:0: [sdm] Mode Sense: 83 00 10 08
>[   46.412879] sd 7:0:6:0: [sdm] Write cache: enabled, read cache: enabled, supports DPO and FUA
>[   46.421483] sd 7:0:6:0: alua: transition timeout set to 60 seconds
>d-journald.servi[   46.421489] sd 7:0:6:0: alua: port group 01 state A preferred supports TolUsNA
>[   46.421666]  sdm: sdm1
>[   46.424243] sd 7:0:6:0: [sdm] Attached SCSI disk
>[   46.667079] qla2xxx [0000:07:00.7]-00fb:8: QLogic QLE8242 - QLogic PCI-Express Dual Port 10Gb CNA.
>[   46.667087] qla2xxx [0000:07:00.7]-00fc:8: ISP8021: PCIe (5.0GT/s x8) @ 0000:07:00.7 hdma+ host#=8 fw=4.16.34 (804).
>[   46.721422] qla4xxx 0000:07:00.4: Found an ISP8022, irq 16, iobase 0x          (null)
>[   46.721502] scsi host9: qla4xxx
>[   46.723272] scsi 7:0:6:7: Attached scsi generic sg16 type 0
>[   46.725234] scsi 7:0:7:0: Direct-Access     LSI      INF-01-00        0784 PQ: 0 ANSI: 5
>[   46.798416] qla4xxx 0000:07:00.4: Configuring PCI space...
>[   46.798425] qla4xxx 0000:07:00.4: qla4_8xxx_set_drv_active(9): drv_active: 0x11110011
>[   46.798432] qla4xxx 0000:07:00.4: Device state is 0x3 = Ready
>[   46.798572] qla4xxx 0000:07:00.4: qla4xxx_request_irqs: irq 16 attached
>[   46.815261] DMAR: DRHD: handling fault status reg 2
>[   46.815266] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>[   46.869560] DMAR: DRHD: handling fault status reg 102
>[   46.869564] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>[   47.047157] scsi 7:0:7:0: alua: supports implicit and explicit TPGS
>[   47.047163] scsi 7:0:7:0: alua: device naa.60080e500017c4160000a0be52809f3a port group 1 rel port 8002
>[   47.047444] sd 7:0:7:0: Attached scsi generic sg17 type 0
>[   47.246385] DMAR: DRHD: handling fault status reg 202
>[   47.246390] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>[   47.251686] sd 7:0:7:0: alua: port group 01 state A preferred supports TolUsNA
>[   47.252264] sd 7:0:7:0: [sdn] Disabling DIF Type 1 protection
>[   47.252338] scsi 7:0:7:7: Direct-Access     LSI      Universal Xport  0784 PQ: 0 ANSI: 5
>[   47.253724] sd 7:0:7:0: [sdn] 67108864 512-byte logical blocks: (34.4 GB/32.0 GiB)
>[   47.253937] sd 7:0:7:0: [sdn] Write Protect is off
>[   47.253940] sd 7:0:7:0: [sdn] Mode Sense: 83 00 10 08
>[   47.254262] sd 7:0:7:0: [sdn] Write cache: enabled, read cache: enabled, supports DPO and FUA
>[   47.263856]  sdn: sdn1
>[   47.269922] sd 7:0:7:0: [sdn] Attached SCSI disk
>[   47.287032] qla4xxx 0000:07:00.4: Initializing firmware..
>[   47.314394] DMAR: DRHD: handling fault status reg 302
>[   47.314398] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>ce: Added fd 35 [   47.398668] DMAR: DRHD: handling fault status reg 402
>[   47.398673] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>[   47.412769] DMAR: DRHD: handling fault status reg 502
>[   47.412774] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>[   47.432757] DMAR: DRHD: handling fault status reg 602
>[   47.432762] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>[   47.451113] qla4xxx 0000:07:00.4: qla4xxx_isr_decode_mailbox: LINK UP
>[   47.459628] DMAR: DRHD: handling fault status reg 702
>[   47.459633] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>[   47.514474] DMAR: DRHD: handling fault status reg 2
>[   47.514478] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>[   47.667277] scsi 7:0:7:7: Attached scsi generic sg18 type 0
>[   48.571670] DMAR: DRHD: handling fault status reg 102
>[   48.571675] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>[   52.799825] dmar_fault: 3 callbacks suppressed
>[   52.799828] DMAR: DRHD: handling fault status reg 502
>[   52.799832] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>[   53.856833] DMAR: DRHD: handling fault status reg 602
>[   53.856838] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>(n/a) to fd stor[   54.353204] usbcore: registered new interface driver hub
>e.
>systemd-udev-trigger.service: Executing: /usr/bin/udevadm trigger --type=dev[   54.398635] usbcore: registered new device driver usb
>ices --action=add
>systemd-journald.service: Received EPOLLHUP on stored fd 35 (stored), closing.
>Received SIGCHLD from PID 792 (udevadm).
>Child 792 (udevadm) died (code=exited, status=0/SUCCESS)
>systemd-udev-trigger.service: Child 792 belongs to systemd-udev-trigger.service
>systemd-udev-trigger.service: Main process exited, code=exited, status=0/SUCCESS
>systemd-udev-trigger.service: Changed start -> exited
>systemd-udev-trigger.service: Job systemd-udev-trigger.service/start finished, result=done
>[[0;32m  OK  [0m] Started udev Coldplug all Devices.
>dev-ttyS11.device: Changed dead -> plugged
>sys-devices-platform-serial8250-tty-ttyS11.device: Changed dead -> plugged
>dev-ttyS12.device: Changed dead -> plugged
>sys-devices-platform-se[   54.444779] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>rial8250-tty-ttyS12.device: Changed dead -> plugged
>dev-ttyS10.device: Changed dead -> plugged
>sys-devices-platform-serial8250-tty-ttyS10.device: Changed dead -> plugged
>dev-ttyS13.device: Changed dead -> plugged
>sys-devices-platform-serial8250-tty-ttyS13.device: Changed dead -> plugged
>dev-ttyS14.device: Changed dead -> plugged
>sys-devices-platform-serial8250-tty-ttyS14.device: Changed dead -> plugged
>dev-ttyS15.device: Changed dead -> [   54.503130] uhci_hcd: USB Universal Host Controller Interface driver
>plugged
>sys-dev[   54.503134] ehci-pci: EHCI PCI platform driver
>ices-platform-se[   54.503743] xhci_hcd 0000:00:14.0: xHCI Host Controller
>rial8250-tty-tty[   54.503754] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[   54.504890] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
>[   54.504897] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[   54.505000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>S15.device: Chan[   54.505002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>ged dead -> plugged
>dev-ttyS17.device: Changed dead -> plugged
[   54.505003] usb usb1: Product: xHCI Host Controller
>
>sys-devices-pla[   54.505005] usb usb1: Manufacturer: Linux 4.11.8-2-default xhci-hcd
>tform-serial8250-tty-ttyS17.device: Changed dead -> plugged
>dev[   54.505006] usb usb1: SerialNumber: 0000:00:14.0
>-ttyS16.device: Changed dead -> [   54.505219] hub 1-0:1.0: USB hub found
>plugged
>sys-devices-platform-serial8250-tty-ttyS16.device: Chan[   54.505248] hub 1-0:1.0: 15 ports detected
>ged dead -> plug[   54.506877] xhci_hcd 0000:00:14.0: xHCI Host Controller
>ged
>dev-ttyS18.device: Changed dead -> plugged
[   54.506882] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>
>sys-devices-pla[   54.506935] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>tform-serial8250-tty-ttyS18.device: Changed dead -> plugged
>dev[   54.506937] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>-ttyS19.device: Changed dead -> plugged
>sys-devices-platform-serial8250-tty-ttyS19.device: Chan[   54.506939] usb usb2: Product: xHCI Host Controller
>ged dead -> plugged
>dev-ttyS2.device: Changed dead -> plugged
>sys-devices-plat[   54.506940] usb usb2: Manufacturer: Linux 4.11.8-2-default xhci-hcd
>form-serial8250-tty-ttyS2.device[   54.506942] usb usb2: SerialNumber: 0000:00:14.0
>: Changed dead -> plugged
>dev-ttyS20.device: Changed dead -> pl[   54.507124] hub 2-0:1.0: USB hub found
>ugged
>sys-devices-platform-serial8250-tty-ttyS20.device: Changed dead -> plugged
>dev-ttyS21.de[   54.507142] hub 2-0:1.0: 6 ports detected
>vice: Changed dead -> plugged
>s[   54.507428] usb: port power management may be unreliable
>ys-devices-platform-serial8250-t[   54.560833] ehci-pci 0000:00:1a.0: EHCI Host Controller
>ty-ttyS21.device[   54.560844] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
>: Changed dead -[   54.560863] ehci-pci 0000:00:1a.0: debug port 2
>> plugged
>dev-t[   54.564781] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>tyS22.device: Changed dead -> pl[   54.564803] ehci-pci 0000:00:1a.0: irq 18, io mem 0x93c02000
>ugged
>sys-devices-platform-serial8250-tty-ttyS22.device: Change[   54.579001] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>d dead -> plugge[   54.579068] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>d
>dev-ttyS23.device: Changed de[   54.579070] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>ad -> plugged
>s[   54.579071] usb usb3: Product: EHCI Host Controller
>ys-devices-platf[   54.579073] usb usb3: Manufacturer: Linux 4.11.8-2-default ehci_hcd
>orm-serial8250-t[   54.579075] usb usb3: SerialNumber: 0000:00:1a.0
>ty-ttyS23.device: Changed dead -> plugged
>dev-t[   54.579241] hub 3-0:1.0: USB hub found
>tyS24.device: Ch[   54.579248] hub 3-0:1.0: 2 ports detected
>anged dead -> pl[   54.580018] ehci-pci 0000:00:1d.0: EHCI Host Controller
>ugged
>sys-devic[   54.580028] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
>es-platform-seri[   54.580046] ehci-pci 0000:00:1d.0: debug port 2
>al8250-tty-ttyS24.device: Change[   54.583977] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>d dead -> plugged
>dev-ttyS25.de[   54.583983] ehci-pci 0000:00:1d.0: irq 18, io mem 0x93c01000
>vice: Changed de[   54.599003] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>ad -> plugged
>s[   54.599065] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
>ys-devices-platf[   54.599066] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>orm-serial8250-t[   54.599068] usb usb4: Product: EHCI Host Controller
>ty-ttyS25.device[   54.599070] usb usb4: Manufacturer: Linux 4.11.8-2-default ehci_hcd
>: Changed dead -[   54.599071] usb usb4: SerialNumber: 0000:00:1d.0
>> plugged
>dev-t[   54.599232] hub 4-0:1.0: USB hub found
>tyS27.device: Changed dead -> pl[   54.599239] hub 4-0:1.0: 2 ports detected
>ugged
>sys-devic[   54.831116] usb 1-3: new high-speed USB device number 2 using xhci_hcd
>es-platform-seri[   54.955459] DMAR: DRHD: handling fault status reg 702
>al8250-tty-ttyS2[   54.955463] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>7.device: Change[   54.955527] usb 3-1: new high-speed USB device number 2 using ehci-pci
>d dead -> plugge[   54.955544] usb 4-1: new high-speed USB device number 2 using ehci-pci
>d
>dev-ttyS28.de[   55.051779] usb 1-3: New USB device found, idVendor=0424, idProduct=2660
>vice: Changed de[   55.051781] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>ad -> plugged
>s[   55.127665] hub 1-3:1.0: USB hub found
>ys-devices-platf[   55.127726] hub 1-3:1.0: 2 ports detected
>orm-serial8250-t[   55.390124] usb 3-1: New USB device found, idVendor=8087, idProduct=800a
>ty-ttyS28.device[   55.390127] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>: Changed dead -[   55.390212] usb 4-1: New USB device found, idVendor=8087, idProduct=8002
>> plugged
>dev-ttyS26.device: Ch[   55.390213] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>anged dead -> pl[   55.432015] hub 3-1:1.0: USB hub found
>ugged
>sys-devic[   55.432137] hub 4-1:1.0: USB hub found
>es-platform-seri[   55.432147] hub 3-1:1.0: 6 ports detected
>al8250-tty-ttyS2[   55.484919] hub 4-1:1.0: 8 ports detected
>6.device: Change[   56.000435] DMAR: DRHD: handling fault status reg 2
>d dead -> plugge[   56.000440] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>d
>dev-ttyS3.device: Changed dea[   57.108268] DMAR: DRHD: handling fault status reg 102
>d -> plugged
>sy[   57.108272] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>s-devices-platform-serial8250-tty-ttyS3.device: Changed dead -> plugged
>dev-ttyS29.device: Changed dead -> plugged
>sys-devices-platform-serial[   58.099293] uhci_hcd 0000:01:00.4: UHCI Host Controller
>8250-tty-ttyS29.[   58.147457] DMAR: DRHD: handling fault status reg 202
>device: Changed [   58.147460] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>dead -> plugged
>dev-ttyS31.device: Changed dead -> plugged
>sys[   58.309151] uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 5
>-devices-platfor[   58.372286] uhci_hcd 0000:01:00.4: detected 8 ports
>m-serial8250-tty[   58.413777] uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
>-ttyS31.device: Changed dead -> plugged
>[[0m[0;31m*     [0m] A start job is [   58.474408] usb 1-3: USB disconnect, device number 2
>running for dev-diskâ¦d5b353d1daa.device (27s /[   58.517312] uhci_hcd 0000:01:00.4: irq 19, io base 0x00001300
> 3min 1s)dev-ttyS6.device: Changed dead -> plugged
>sys-devices-[   58.566635] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[   58.626117] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   58.690787] usb usb5: Product: UHCI Host Controller
>[   58.733143] usb usb5: Manufacturer: Linux 4.11.8-2-default uhci_hcd
>[   58.787606] usb usb5: SerialNumber: 0000:01:00.4
>[   58.815021] usb 1-3: new high-speed USB device number 3 using xhci_hcd
>platform-serial8250-tty-ttyS6.device: Changed dead -> plugged
>dev-ttyS30.device[   58.883948] hub 5-0:1.0: USB hub found
>: Changed dead -[   58.916302] hub 5-0:1.0: 2 ports detected
>> plugged
>sys-devices-platform-serial8250-tty-ttyS30.device: Changed dead -> plugged
>dev-ttyS4.device: Changed dead -> plugged
>sys-devices-platform-serial8250-tty-ttyS4.device: Changed dead -> plugged
>dev-ttyS9.device: Changed dead -> plugged
>sys-devices-platform-serial8250-tty-ttyS9.device: Changed dead -> plugged
>dev-ttyS5.device: Changed dead -> plugged
>sys-devices-platform-serial8250-tty-ttyS5.device: Changed dead -> plugged
>
[K[[0;1;31m*[0m[0;31m*    [0m] A start job is running for dev-diskâ¦d5b353d1daa.device (28s / 3min 1s)dev-ttyS8.device: Changed dead -> plugged
>sys-devices-platform-serial8250-tty-ttyS8.device: Changed dead -> plugged
>dev-ttyS7.device: Changed dead -> plugged
>sys-devices-platform-serial8250-tty-ttyS7.device: Changed dead -> plugged
>dev-ttyS1.device: Changed dead -> plugged
>sys-devices-pnp0-00:03-tty-ttyS1.device: Changed dead -> plugged
>dev-ttyS0.device: Changed dead -> plugged
>sys-devices-pnp0-00:02-tty-ttyS0.device: Changed dead -> plugged
>
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] A start job is running for dev-diskâ¦d5b353d1daa.device (28s / 3min 1s)sys-subsystem-net-devices-ens2f0.device: Changed dead -> plugged
>sys-devices-pci0000:00-0000:00:01.0-0000:07:00.0-net-ens2f0.device: Changed dead -> plugged
>sys-subsystem-net-devices-ens2f1.device: Changed dead -> plugged
>sys-devices-pci0000:00-0000:00:01.0-0000:07:00.1-net-ens2f1.device: Changed dead -> plugged
>sys-subsystem-net-devices-eno2.device: Changed dead -> plugged
>sys-devices-pci0000:00-0000:00:1c.959105] usb 1-3: New USB device found, idVendor=0424, idProduct=2660
>4-0000:02:00.1-net-eno2.device: [   59.209412] DMAR: DRHD: handling fault status reg 302
>Changed dead -> [   59.209416] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>plugged
>sys-sub[   59.370641] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>system-net-devices-eno4.device: Changed dead -> plugged
>sys-devices-pci0000:00-0000:00:1c.4-0000:02:00.3-net-eno4.device: Changed dead -> plugg[   59.431890] hub 1-3:1.0: USB hub found
>ed
>sys-subsystem-net-devices-en[   59.463710] hub 1-3:1.0: 2 ports detected
>o1.device: Changed dead -> plugged
>sys-devices-pci0000:00-0000:00:1c.4-0000:02:00.0-net-eno1.device: Changed dead -> plugged
>sys-subsystem-net-devices-eno3.device: Changed dead -> plugged
>sys-devices-pci0000:00-0000:00:1c.4-0000:02:00.2-net-eno3.device: Changed dead -> plugged
>systemd-udev-settle.service: ConditionPathIsReadWrite=/sys succeeded.
>systemd-udev-settle.service: Passing 0 fds to service
>systemd-udev-settle.service: About to execute: /usr/bin/udevadm settle
>systemd-udev-settle.service: Forked /usr/bin/udevadm as 1112
>systemd-udev-settle.service: Changed dead -> start
>systemd-udev-settle.service: Executing: /usr/bin/udevadm settle
>
[K         Starting udev Wait for Complete Device Initialization...
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 35 (n/a) to fd store.
>[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (29s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (29s / 3min 1s)[   60.224736] DMAR: DRHD: handling fault status reg 402
>[   60.267760] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (30s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦ce Initialization (30s / 3min 29s)[  61.281819] DMAR: DRHD: handling fault status reg 502
>[   61.325543] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>
[K[     [0;31m*[0m] (1 of 2) A start job is running forâ¦ce Initialization (31s / 3min 29s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦ce Initialization (31s / 3min 29s)[   62.338968] DMAR: DRHD: handling fault status reg 602
>[   62.382845] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (32s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (32s / 3min 1s)[   63.395939] DMAR: DRHD: handling fault status reg 702
>[   63.439802] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (33s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦ce Initialization (33s / 3min 29s)[   64.479263] DMAR: DRHD: handling fault status reg 2
>[   64.521349] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>
[K[[0;1;31m*[0m[0;31m*    [0m] (1 of 2) A start job is running forâ¦ce Initialization (34s / 3min 29s)
[K[[0m[0;31m*     [0m] (1 of 2) A start job is running forâ¦ce Initialization (34s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (35s / 3min 1s)[   65.536282] DMAR: DRHD: handling fault status reg 102
>[   65.579943] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification fai[387] DMAR: DRHD: handling fault status reg 202
>
[K[[0;31m*[0;1;31m*[0m[0;3[   66.919270] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>1m*   [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (36s / 3min 1s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (36s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦ce Initialization (37s / 3min 29s)[   67.650376] DMAR: DRHD: handling fault status reg 302
>[   67.693312] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (1 of 2) A start job is running forâ¦ce Initialization (37s / 3min 29s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦ce Initialization (38s / 3min 29s)[   68.707390] DMAR: DRHD: handling fault status reg 402
>[   68.750285] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due 3]=0005
>[   69.934982] qla4xxx 0000:07:00.4: PEX DMA Not supported 0
>[   70.034987]  QLogic iSCSI HBA Driver version: 5.04.00-k6
>[   70.034987]   QLogic ISP8022 @ 0000:07:00.4, host#=9, fw=04.16.34.56917
>[   71.987034] DMAR: [INTR-REMAP] Request device [07:00.4] fault index 2c [fault reason 38] Blocked an interrupt request due to source-id verification failure
>[   72.104978] DMAR: DRHD: handling fault status reg 600
>
[K[     [0;31m*[0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (42s / 3min 1s)[   72.695326] qla2xxx [0000:07:00.7]-8038:8: Cable is unplugged...
>
[K[    [0;31m*[0;1;31m*[0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (42s / 3min 1s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (43s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦ce Initialization (43s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (1 of 2) A start job is running forâ¦ce Initialization (44s / 3min 29s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦ce Initialization (44s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (45s / 3min 1s)
[K[[0m[0;31m*     [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (45s / 3min 1s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (46s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦ce Initialization (46s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (1 of 2) A start job is running forâ¦ce Initialization (47s / 3min 29s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦ce Initialization (47s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (48s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (48s / 3min 1s)
[K[     [0;31m*[0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (49s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦ce Initialization (49s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (1 of 2) A start job is running forâ¦ce Initialization (50s / 3min 29s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦ce Initialization (50s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (51s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (51s / 3min 1s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (52s / 3min 1s)
[K[[0m[0;31m*     [0m] (1 of 2) A start job is running forâ¦ce Initialization (52s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (1 of 2) A start job is running forâ¦ce Initialization (53s / 3min 29s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦ce Initialization (53s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (54s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (54s / 3min 1s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (55s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦ce Initialization (55s / 3min 29s)
[K[     [0;31m*[0m] (1 of 2) A start job is running forâ¦ce Initialization (56s / 3min 29s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦ce Initialization (56s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (57s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (57s / 3min 1s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦d5b353d1daa.device (58s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦ce Initialization (58s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (1 of 2) A start job is running forâ¦ce Initialization (59s / 3min 29s)
[K[[0m[0;31m*     [0m] (1 of 2) A start job is running forâ¦ce Initialization (59s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦5b353d1daa.device (1min / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (2 of 2) A start job is running forâ¦5b353d1daa.device (1min / 3min 1s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦53d1daa.device (1min 1s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦nitialization (1min 1s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (1 of 2) A start job is running forâ¦nitialization (1min 2s / 3min 29s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦nitialization (1min 2s / 3min 29s)
[K[     [0;31m*[0m] (2 of 2) A start job is running forâ¦53d1daa.device (1min 3s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (2 of 2) A start job is running forâ¦53d1daa.device (1min 3s / 3min 1s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦53d1daa.device (1min 4s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦nitialization (1min 4s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (1 of 2) A start job is running forâ¦nitialization (1min 5s / 3min 29s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦nitialization (1min 5s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦53d1daa.device (1min 6s / 3min 1s)
[K[[0m[0;31m*     [0m] (2 of 2) A start job is running forâ¦53d1daa.device (1min 6s / 3min 1s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦53d1daa.device (1min 7s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦nitialization (1min 7s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (1 of 2) A start job is running forâ¦nitialization (1min 8s / 3min 29s)systemd-udevd.service: Got notification message from PID 781 (WATCHDOG=1)
>
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦nitialization (1min 8s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦53d1daa.device (1min 9s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (2 of 2) A start job is running forâ¦53d1daa.device (1min 9s / 3min 1s)
[K[     [0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 10s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 10s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 11s / 3min 29s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦itialization (1min 11s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 12s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 12s / 3min 1s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 13s / 3min 1s)
[K[[0m[0;31m*     [0m] (1 of 2) A start job is running forâ¦itialization (1min 13s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (1 of 2) A start job is running forâ¦itialization (1min 14s / 3min 29s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦itialization (1min 14s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 15s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 15s / 3min 1s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 16s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 16s / 3min 29s)
[K[     [0;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 17s / 3min 29s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 17s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 18s / 3min 1s)[  108.706879] usb 1-3: USB disconnect, device number 3
>
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 18s / 3min 1s)[  109.154860] usb 1-3: new high-speed USB device number 4 using xhci_hcd
>
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 19s / 3min 1s)[  109.346974] usb 1-3: New USB device found, idVendor=0424, idProduct=2660
>[  109.408242] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[  109.469354] hub 1-3:1.0: USB hub found
>[  109.501374] hub 1-3:1.0: 2 ports detected
>
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦itialization (1min 19s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (1 of 2) A start job is running forâ¦itialization (1min 20s / 3min 29s)
[K[[0m[0;31m*     [0m] (1 of 2) A start job is running forâ¦itialization (1min 20s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 21s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 21s / 3min 1s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 22s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦itialization (1min 22s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 23s / 3min 29s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 23s / 3min 29s)
[K[     [0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 24s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 24s / 3min 1s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 25s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦itialization (1min 25s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (1 of 2) A start job is running forâ¦itialization (1min 26s / 3min 29s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦itialization (1min 26s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 27s / 3min 1s)
[K[[0m[0;31m*     [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 27s / 3min 1s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 28s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦itialization (1min 28s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (1 of 2) A start job is running forâ¦itialization (1min 29s / 3min 29s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦itialization (1min 29s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 30s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 30s / 3min 1s)
[K[     [0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 31s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 31s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 32s / 3min 29s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦itialization (1min 32s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 33s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 33s / 3min 1s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 34s / 3min 1s)
[K[[0m[0;31m*     [0m] (1 of 2) A start job is running forâ¦itialization (1min 34s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (1 of 2) A start job is running forâ¦itialization (1min 35s / 3min 29s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦itialization (1min 35s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 36s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 36s / 3min 1s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 37s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 37s / 3min 29s)
[K[     [0;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 38s / 3min 29s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 38s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 39s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 39s / 3min 1s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 40s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦itialization (1min 40s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (1 of 2) A start job is running forâ¦itialization (1min 41s / 3min 29s)
[K[[0m[0;31m*     [0m] (1 of 2) A start job is running forâ¦itialization (1min 41s / 3min 29s)[  132.078767] qla4xxx 0000:07:00.4: scsi9: Mailbox Cmd 0x00000059 timed out, Scheduling Adapter Reset
>[  132.159312] qla4xxx 0000:07:00.4: disabling pause transmit on port 0 & 1.
>[  132.218197] qla4xxx 0000:07:00.4: qla4_8xxx_set_param: failed status FFFFFFFF
>[  132.280984] qla4xxx 0000:07:00.4: get_fw_boot_info: Get FW boot info for 0x8022 func 4
>systemd-journald.service: Got notification message from PID 650 (WATCHDOG=1)
>
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 42s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 42s / 3min 1s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 43s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦itialization (1min 43s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 44s / 3min 29s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 44s / 3min 29s)
[K[     [0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 45s / 3min 1s)[  135.566791] qla4xxx 0000:07:00.4: HW State: NEED RESET
>[  135.613623] qla4xxx 0000:07:00.4: Device state is 0x4 = Need Reset
>[  135.662741] qla2xxx [0000:07:00.6]-6001:7: Adapter reset needed.
>[  135.719632] qla4xxx 0000:07:00.4: Performing ISP error recovery
>[  135.770615] qla4xxx 0000:07:00.4: qla4_82xx_need_reset_handler(9): drv_state = 0x0, drv_active = 0x11110011
>[  135.770617] qla4xxx 0000:07:00.4: qla4_82xx_need_reset_handler(9): drv_state = 0x0, drv_active = 0x11110011
>[  135.770624] qla2xxx [0000:07:00.6]-b031:7: Device state is 0x4 = Need Reset.
>[  135.770629] qla2xxx [0000:07:00.6]-009b:7: Device state is 0x4 = Need Reset.
>[  135.770631] qla2xxx [0000:07:00.6]-009d:7: Device state is 0x4 = Need Reset.
>[  135.770635] qla2xxx [0000:07:00.6]-00af:7: Performing ISP error recovery - ha=ffff92989e700000.
>[  135.822745] qla2xxx [0000:07:00.7]-6001:8: Adapter reset needed.
>[  135.822766] qla2xxx [0000:07:00.7]-b031:8: Device state is 0x4 = Need Reset.
>[  135.822770] qla2xxx [0000:07:00.7]-009b:8: Device state is 0x4 = Need Reset.
>[  135.822772] qla2xxx [0000:07:00.7]-009d:8: Device state is 0x4 = Need Reset.
>[  135.822776] qla2xxx [0000:07:00.7]-00af:8: Performing ISP error recovery - ha=ffff92989d8a0000.
>
[K[    [0;31m*[0;1;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 45s / 3min 1s)[  136.782760] qla4xxx 0000:07:00.4: qla4_82xx_need_reset_handler(9): drv_state = 0x11, drv_active = 0x11110011
>
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 46s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦itialization (1min 47s / 3min 29s)[  137.786776] qla2xxx [0000:07:00.6]-00b4:7: Done chip reset cleanup.
>[  137.870777] qla2xxx [0000:07:00.7]-00b4:8: Done chip reset cleanup.
>[  137.902744] qla4xxx 0000:07:00.4: qla4_82xx_need_reset_handler(9): drv_state = 0x1000011, drv_active = 0x11110011
>
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (1 of 2) A start job is running forâ¦itialization (1min 47s / 3min 29s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦itialization (1min 48s / 3min 29s)[  138.926756] qla4xxx 0000:07:00.4: qla4_82xx_need_reset_handler(9): drv_state = 0x11000011, drv_active = 0x11110011
>
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 48s / 3min 1s)
[K[[0m[0;31m*     [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 49s / 3min 1s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 49s / 3min 1s)[  140.046749] qla4xxx 0000:07:00.4: qla4_82xx_need_reset_handler(9): drv_state = 0x11000011, drv_active = 0x11110011
>
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦itialization (1min 50s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (1 of 2) A start job is running forâ¦itialization (1min 50s / 3min 29s)[  141.166754] qla4xxx 0000:07:00.4: qla4_82xx_need_reset_handler(9): drv_state = 0x11000011, drv_active = 0x11110011
>
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦itialization (1min 51s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 51s / 3min 1s)[  142.286734] qla4xxx 0000:07:00.4: qla4_82xx_need_reset_handler(9): drv_state = 0x11000011, drv_active = 0x11110011
>
[K[    [0;31m*[0;1;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 52s / 3min 1s)
[K[     [0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 52s / 3min 1s)[  143.406743] qla4xxx 0000:07:00.4: qla4_82xx_need_reset_handler(9): drv_state = 0x11000011, drv_active = 0x11110011
>
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 53s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (1 of 2) A start job is running forâ¦itialization (1min 53s / 3min 29s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦itialization (1min 54s / 3min 29s)[  144.526739] qla4xxx 0000:07:00.4: qla4_82xx_need_reset_handler(9): drv_state = 0x11000011, drv_active = 0x11110011
>
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 54s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 55s / 3min 1s)[  145.646724] qla4xxx 0000:07:00.4: qla4_82xx_need_reset_handler(9): drv_state = 0x11000011, drv_active = 0x11110011
>
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 55s / 3min 1s)
[K[[0m[0;31m*     [0m] (1 of 2) A start job is running forâ¦itialization (1min 56s / 3min 29s)[  146.766730] qla4xxx 0000:07:00.4: qla4xxx: RESET TIMEOUT! drv_state: 0x11000011, drv_active: 0x11110011
>[  146.851557] qla4xxx 0000:07:00.4: Device state is 0x4 = Need Reset
>[  146.904864] qla4xxx 0000:07:00.4: HW State: COLD/RE-INIT
>[  146.950543] qla4xxx 0000:07:00.4: qla4_8xxx_set_rst_ready(9): drv_state: 0x11010011
>[  147.017292] qla4xxx 0000:07:00.4: Device state is 0x1 = Cold
>[  147.017295] qla4xxx 0000:07:00.4: HW State: INITIALIZING
>[  147.017298] qla4xxx 0000:07:00.4: FW: Retrieving flash offsets from FLT/FDT ...
>[  147.017307] qla2xxx [0000:07:00.6]-00b6:7: Device state is 0x2 = Initializing.
>[  147.017311] qla2xxx [0000:07:00.6]-009d:7: Device state is 0x2 = Initializing.
>[  147.089593] qla4xxx 0000:07:00.4: FW: Attempting to load firmware from flash...
>[  147.103005] qla4xxx 0000:07:00.4: qla4xxx: 208 CRB init values found in ROM.
>[  147.214729] qla2xxx [0000:07:00.7]-00b6:8: Device state is 0x2 = Initializing.
>[  147.214732] qla2xxx [0000:07:00.7]-009d:8: Device state is 0x2 = Initializing.
>[  147.374722] qlcnic 0000:07:00.0: Detected state change from DEV_NEED_RESET, skipping ack check
>[  147.374755] qlcnic 0000:07:00.1: Detected state change from DEV_NEED_RESET, skipping ack check
>
[K[[0;1;31m*[0m[0;31m*    [0m] (1 of 2) A start job is running forâ¦itialization (1min 56s / 3min 29s)[  148.022723] qla2xxx [0000:07:00.6]-009d:7: Device state is 0x2 = Initializing.
>
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦itialization (1min 58s / 3min 29s)[  148.238712] qla2xxx [0000:07:00.7]-009d:8: Device state is 0x2 = Initializing.
>
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 58s / 3min 1s)[  149.094718] qla2xxx [0000:07:00.6]-009d:7: Device state is 0x2 = Initializing.
>
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 59s / 3min 1s)[  149.326710] qla2xxx [0000:07:00.7]-009d:8: Device state is 0x2 = Initializing.
>
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (1min 59s / 3min 1s)[  150.166714] qla2xxx [0000:07:00.6]-009d:7: Device state is 0x2 = Initializing.
>
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦e Initialization (2min / 3min 29s)[  150.414712] qla2xxx [0000:07:00.7]-009d:8: Device state is 0x2 = Initializing.
>
[K[     [0;31m*[0m] (1 of 2) A start job is running forâ¦e Initialization (2min / 3min 29s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦nitialization (2min 1s / 3min 29s)[  151.238675] qla2xxx [0000:07:00.6]-009d:7: Device state is 0x2 = Initializing.
>[  151.502719] qla2xxx [0000:07:00.7]-009d:8: Device state is 0x2 = Initializing.
>
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦53d1daa.device (2min 1s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running forâ¦53d1daa.device (2min 2s / 3min 1s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦53d1daa.device (2min 2s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦nitialization (2min 3s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (1 of 2) A start job is running forâ¦nitialization (2min 3s / 3min 29s)
[K[[0m[0;31m*     [0m] (1 of 2) A start job is running forâ¦nitialization (2min 4s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦53d1daa.device (2min 4s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (2 of 2) A start job is running forâ¦53d1daa.device (2min 5s / 3min 1s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦53d1daa.device (2min 5s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦nitialization (2min 6s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (1 of 2) A start job is running forâ¦nitialization (2min 6s / 3min 29s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦nitialization (2min 7s / 3min 29s)
[K[     [0;31m*[0m] (2 of 2) A start job is running forâ¦53d1daa.device (2min 7s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (2 of 2) A start job is running forâ¦53d1daa.device (2min 8s / 3min 1s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦53d1daa.device (2min 8s / 3min 1s)[  159.042707] usb 1-3: USB disconnect, device number 4
>systemd-udevd.service: Got notification message from PID 781 (WATCHDOG=1)
>
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦nitialization (2min 9s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (1 of 2) A start job is running forâ¦nitialization (2min 9s / 3min 29s)[  159.490647] usb 1-3: new high-speed USB device number 5 using xhci_hcd
>[  159.682800] usb 1-3: New USB device found, idVendor=0424, idProduct=2660
>[  159.726682] qla4xxx 0000:07:00.4: HW State: READY
>[  159.726688] qla4xxx 0000:07:00.4: qla4_8xxx_clear_rst_ready(9): drv_state: 0x11000011
>[  159.726691] qla4xxx 0000:07:00.4: Clearing AF_RECOVERY in qla4_82xx_isp_reset
>[  159.726702] qla4xxx 0000:07:00.4: Configuring PCI space...
>[  159.758672] qla2xxx [0000:07:00.7]-009d:8: Device state is 0x3 = Ready.
>[  160.019701] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[  160.020107] hub 1-3:1.0: USB hub found
>[  160.020133] hub 1-3:1.0: 2 ports detected
>
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦nitialization (2min 9s / 3min 29s)[  160.558678] qla2xxx [0000:07:00.6]-009d:7: Device state is 0x3 = Ready.
>
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 10s / 3min 1s)[  160.785139] qlcnic 0000:07:00.0: Driver v5.3.65, firmware v4.16.34
>[  160.799810] qlcnic 0000:07:00.1: Driver v5.3.65, firmware v4.16.34
>[  161.186680] qla2xxx [0000:07:00.6]-500a:7: LOOP UP detected (10 Gbps).
>
[K[[0m[0;31m*     [0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 11s / 3min 1s)[  161.322705] qla2xxx [0000:07:00.6]-1005:7: Cmd 0x10 aborted with timeout since ISP Abort is pending
>
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 11s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦itialization (2min 12s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (1 of 2) A start job is running forâ¦itialization (2min 12s / 3min 29s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦itialization (2min 13s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 13s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 14s / 3min 1s)
[K[     [0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 14s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦itialization (2min 15s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (1 of 2) A start job is running forâ¦itialization (2min 15s / 3min 29s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦itialization (2min 16s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 16s / 3min 1s)[  166.894621]  rport-7:0-7: blocked FC remote port time out: removing target and saving binding
>[  166.971308]  rport-7:0-6: blocked FC remote port time out: removing target and saving binding
>[  167.044393]  rport-7:0-5: blocked FC remote port time out: removing target and saving binding
>[  167.116871]  rport-7:0-4: blocked FC remote port time out: removing target and saving binding
>[  167.189276]  rport-7:0-3: blocked FC remote port time out: removing target and saving binding
>[  167.261662]  rport-7:0-2: blocked FC remote port time out: removing target and saving binding
>[  167.261668]  rport-7:0-1: blocked FC remote port time out: removing target and saving binding
>[  167.261674]  rport-7:0-0: blocked FC remote port time out: removing target and saving binding
>[  167.335171] sd 7:0:7:0: [sdn] Synchronizing SCSI cache
>[  167.335206] sd 7:0:7:0: [sdn] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
>
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 17s / 3min 1s)[  167.618723] scsi 7:0:7:0: alua: Detached
>[  167.652532] sd 7:0:6:0: [sdm] Synchronizing SCSI cache
>[  167.696529] sd 7:0:6:0: [sdm] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
>[  167.802711] scsi 7:0:6:0: alua: Detached
>[  167.862716] scsi 7:0:5:0: alua: Detached
>[  167.918873] scsi 7:0:4:0: alua: Detached
>
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 17s / 3min 1s)[  167.986716] scsi 7:0:3:0: alua: Detached
>[  168.034797] scsi 7:0:2:0: alua: Detached
>[  168.068844] sd 7:0:1:0: [sdd] Synchronizing SCSI cache
>[  168.113198] sd 7:0:1:0: [sdd] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
>[  168.214719] scsi 7:0:1:0: alua: Detached
>[  168.249029] sd 7:0:0:0: [sdc] Synchronizing SCSI cache
>[  168.292681] sd 7:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
>[  168.398705] scsi 7:0:0:0: alua: Detached
>
[K[[0m[0;31m*     [0m] (1 of 2) A start job is running forâ¦itialization (2min 18s / 3min 29s)[  168.446658] scsi 7:0:5:1: alua: Detached
>[  168.506755] scsi 7:0:4:1: alua: Detached
>[  168.554684] scsi 7:0:3:1: alua: Detached
>[  168.610691] scsi 7:0:2:1: alua: Detached
>
[K[[0;1;31m*[0m[0;31m*    [0m] (1 of 2) A start job is running forâ¦itialization (2min 18s / 3min 29s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦itialization (2min 19s / 3min 29s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 19s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 20s / 3min 1s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 20s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦itialization (2min 21s / 3min 29s)
[K[     [0;31m*[0m] (1 of 2) A start job is running forâ¦itialization (2min 21s / 3min 29s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦itialization (2min 22s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 22s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 23s / 3min 1s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 23s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (1 of 2) A start job is running forâ¦itialization (2min 24s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (1 of 2) A start job is running forâ¦itialization (2min 24s / 3min 29s)
[K[[0m[0;31m*     [0m] (1 of 2) A start job is running forâ¦itialization (2min 25s / 3min 29s)
[K[[0;1;31m*[0m[0;31m*    [0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 25s / 3min 1s)
[K[[0;31m*[0;1;31m*[0m[0;31m*   [0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 26s / 3min 1s)
[K[ [0;31m*[0;1;31m*[0m[0;31m*  [0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 26s / 3min 1s)
[K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running forâ¦itialization (2min 27s / 3min 29s)
[K[   [0;31m*[0;1;31m*[0m[0;31m*[0m] (1 of 2) A start job is running forâ¦itialization (2min 27s / 3min 29s)
[K[    [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running forâ¦itialization (2min 28s / 3min 29s)
[K[     [0;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 28s / 3min 1s)
[K[    [0;31m*[0;1;31m*[0m] (2 of 2) A start job is running forâ¦3d1daa.device (2min 29s / 3min 1s)systemd-journald.service: Received EPOLLHUP on stored fd 35 (stored), closing.
>Received SIGCHLD from PID 1112 (udevadm).
>Child 1112 (udevadm) died (code=exited, status=1/FAILURE)
>systemd-udev-settle.service: Child 1112 belongs to systemd-udev-settle.service
>systemd-udev-settle.service: Main process exited, code=exited, status=1/FAILURE
>systemd-udev-settle.service: Changed start -> failed
>systemd-udev-settle.service: Job systemd-udev-settle.service/start finished, result=failed
>
[K[[0;1;31mFAILED[0m] Failed to start udev Wait for Complete Device Initialization.
>See 'systemctl status systemd-udev-settle.service' for details.
>systemd-udev-settle.service: Unit entered failed state.
>systemd-udev-settle.service: Failed with result 'exit-code'.
>multipathd.service: ConditionKernelCommandLine=!multipath=off succeeded.
>multipathd.service: ConditionKernelCommandLine=!rd_NO_MULTIPATH succeeded.
>multipathd.service: ConditionKernelCommandLine=!rd.multipath=0 succeeded.
>multipathd.service: ConditionKernelCommandLine=!nompath succeeded.
>multipathd.service: About to execute: /sbin/modprobe dm-multipath
>multipathd.service: Forked /sbin/modprobe as 1122
>multipathd.service: Changed dead -> start-pre
>         Starting Device-Mapper Multipath Device Controller...
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 35 (n/a) to fd store.
>multipathd.service: Executing: /sbin/modprobe dm-multipath
>multipathd.service: cgroup is empty
>Received SIGCHLD from PID 1122 (modprobe).
>Child 1122 (modprobe) died (code=exited, status=0/SUCCESS)
>multipathd.service: Child 1122 belongs to multipathd.service
>multipathd.service: Control process exited, code=exited status=0
>multipathd.service: Got final SIGCHLD for state start-pre.
>multipathd.service: Passing 0 fds to service
>multipathd.service: About to execute: /sbin/multipathd -s -d
>multipathd.service: Forked /sbin/multipathd as 1123
>multipathd.service: Changed start-pre -> running
>multipathd.service: Job multi[  179.659806] device-mapper: multipath service-time: version 0.3.0 loaded
>pathd.service/start finished, result=done
>[[0;32m  OK  [0m] Started Device-Mapper Multipath Device Controller.
>systemd-journald.service: Received EPOLLHUP on stored fd 35 (stored), closing.
>local-fs-pre.target changed dead -> active
>local-fs-pre.target: Job local-fs-pre.target/start finished, result=done
>[[0;32m  OK  [0m] Reached target Local File Systems (Pre).
>local-fs.target changed dead -> active
>local-fs.target: Job local-fs.target/start finished, result=done
>[[0;32m  OK  [0m] Reached target Local File Systems.
>sysinit.target changed dead -> active
>sysinit.target: Job sysinit.target/start finished, result=done
>[[0;32m  OK  [0m] Reached target System Initialization.
>iscsiuio.socket: Changed dead -> listening
>iscsiuio.socket: Job iscsiuio.socket/start finished, result=done
>[[0;32m  OK  [0m] Listening on Open-iSCSI iscsiuio Socket.
>multipathd.service: Executing: /sbin/multipathd -s -d
>iscsiuio.service: Passing 1 fds to service
>iscsiuio.service: About to execute: /sbin/iscsiuio
>iscsiuio.service: Forked /sbin/iscsiuio as 1124
>iscsiuio.service: Changed dead -> start
>         Starting iSCSI UserSpace I/O driver...
>iscsid.socket: Changed dead -> listening
>iscsid.socket: Job iscsid.socket/start finished, result=done
>[[0;32m  OK  [0m] Listening on Open-iSCSI iscsid Socket.
>sockets.target changed dead -> active
>sockets.target: Job sockets.target/start finished, result=done
>[[0;32m  OK  [0m] Reached target Sockets.
>basic.target changed dead -> active
>basic.target: Job basic.target/start finished, result=done
>[[0;32m  OK  [0m] Reached target Basic System.
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 37 (n/a) to fd store.
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 38 (n/a) to fd store.
>iscsiuio.service: Executing: /sbin/iscsiuio
>libmount event [rescan: no]
>Received SIGCHLD from PID 1124 (iscsiuio).
>Child 1124 (iscsiuio) died (code=exited, status=0/SUCCESS)
>iscsiuio.service: Child 1124 belongs to iscsiuio.service
>iscsiuio.service: Control process exited, code=exited status=0
>iscsiuio.service: Got final SIGCHLD for state start.
>iscsiuio.service: Main PID loaded: 1125
>iscsiuio.service: Changed start -> running
>iscsiuio.service: Job iscsiuio.service/start finished, result=done
>[[0;32m  OK  [0m] Started iSCSI UserSpace I/O driver.
>iscsiuio.socket: Changed listening -> running
>systemd-journald.service: Received EPOLLHUP on stored fd 38 (stored), closing.
>iscsid.service: Passing 1 fds to service
>iscsid.service: About to execute: /sbin/iscsid -f
>iscsid.service: Forked /sbin/iscsid as 1127
>iscsid.service: Changed dead -> running
>iscsid.service: Job iscsid.service/start finished, result=done
>[[0;32m  OK  [0m] Started Open-iSCSI.
>iscsid.socket: Changed listening -> running
>dracut-initqueue.service: ConditionKernelCommandLine=|rd.break=initqueue failed.
>dracut-initqueue.service: ConditionPathExists=|/lib/dracut/need-initqueue succeeded.
>dracut-initqueue.service: ConditionPathExists=/usr/lib/initrd-release succeeded.
>dracut-initqueue.service: Passing 0 fds to service
>dracut-initqueue.service: About to execute: /bin/dracut-initqueue
>iscsid.service: Executing: /sbin/iscsid -f
>dracut-initqueue.service: Forked /bin/dracut-initqueue as 1128
>dracut-initqueue.service: Changed dead -> start
>         Starting dracut initqueue hook...
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 38 (n/a) to fd store.
>libmount event [rescan: no]
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 39 (n/a) to fd store.
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 40 (n/a) to fd store.
>dracut-initqueue.service: Executing: /bin/dracut-initqueue
>[  179.649020] dracut-initqueue[1128]: calling: settle
>dev-mapper-3600508b1001c04424293d49dd3d37e05.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600508b1001c04424293d49dd3d37e05.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600508b1001c04424293d49dd3d37e05.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dmpath\x2d3600508b1001c04424293d49dd3d37e05.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600508b1001c04424293d49dd3d37e05.device: Changed dead -> plugged
>dev-dm\x2d0.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d0.device: Changed dead -> plugged
>dev-mapper-3600508b1001c04424293d49dd3d37e05\x2dpart1.device: Changed dead -> plugged
>dev-disk-by\x2duuid-dea1a983\x2d484e\x2d4c91\x2daccd\x2d97e8750d64e1.device: Changed dead -> plugged
>dev-disk-by\x2dpartuuid-d8141657\x2d7911\x2d40d4\x2dacbb\x2d1ed363dc852e.device: Changed dead -> plugged
>dev-disk-by\x2dpartlabel-swap.device: Changed dead -> plugged
>dev-disk-by\x2dlabel-swap.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600508b1001c04424293d49dd3d37e05\x2dpart1.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600508b1001c04424293d49dd3d37e05\x2dpart1.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart1\x2dmpath\x2d3600508b1001c04424293d49dd3d37e05.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600508b1001c04424293d49dd3d37e05\x2dpart1.device: Changed dead -> plugged
>dev-dm\x2d2.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d2.device: Changed dead -> plugged
>dev-mapper-3600508b1001c04424293d49dd3d37e05\x2dpart3.device: Changed dead -> plugged
>dev-disk-by\x2duuid-2131124c\x2d62c4\x2d47f5\x2d899b\x2d9ca0679ce9d1.device: Changed dead -> plugged
>dev-disk-by\x2dpartuuid-9932757a\x2db530\x2d4da1\x2d9783\x2d239860ee193e.device: Changed dead -> plugged
>dev-disk-by\x2dpartlabel-kdump.device: Changed dead -> plugged
>dev-disk-by\x2dlabel-crash.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600508b1001c04424293d49dd3d37e05\x2dpart3.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600508b1001c04424293d49dd3d37e05\x2dpart3.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart3\x2dmpath\x2d3600508b1001c04424293d49dd3d37e05.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600508b1001c04424293d49dd3d37e05\x2dpart3.device: Changed dead -> plugged
>dev-dm\x2d4.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d4.device: Changed dead -> plugged
>dev-mapper-3600508b1001ce7b5f538108f225df237.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600508b1001ce7b5f538108f225df237.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600508b1001ce7b5f538108f225df237.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dmpath\x2d3600508b1001ce7b5f538108f225df237.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600508b1001ce7b5f538108f225df237.device: Changed dead -> plugged
>dev-dm\x2d1.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d1.device: Changed dead -> plugged
>dev-mapper-3600508b1001c04424293d49dd3d37e05\x2dpart2.device: Changed dead -> plugged
>dev-disk-by\x2duuid-f689501c\x2da1a9\x2d4270\x2d9367\x2dba9ce98f444f.device: Changed dead -> plugged
>dev-disk-by\x2dpartuuid-ee6a7e0b\x2d0b62\x2d4911\x2d881b\x2d5352d9892b82.device: Changed dead -> plugged
>dev-disk-by\x2dpartlabel-home.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600508b1001c04424293d49dd3d37e05\x2dpart2.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600508b1001c04424293d49dd3d37e05\x2dpart2.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart2\x2dmpath\x2d3600508b1001c04424293d49dd3d37e05.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600508b1001c04424293d49dd3d37e05\x2dpart2.device: Changed dead -> plugged
>dev-dm\x2d3.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d3.device: Changed dead -> plugged
>dev-mapper-3600508b1001ce7b5f538108f225df237\x2dpart2.device: Changed dead -> plugged
>dev-disk-by\x2dpartuuid-000345f3\x2d02.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600508b1001ce7b5f538108f225df237\x2dpart2.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600508b1001ce7b5f538108f225df237\x2dpart2.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart2\x2dmpath\x2d3600508b1001ce7b5f538108f225df237.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600508b1001ce7b5f538108f225df237\x2dpart2.device: Changed dead -> plugged
>dev-dm\x2d6.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d6.device: Changed dead -> plugged
>dev-mapper-3600508b1001ce7b5f538108f225df237\x2dpart1.device: Changed dead -> plugged
>dev-disk-by\x2dpartuuid-000345f3\x2d01.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600508b1001ce7b5f538108f225df237\x2dpart1.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600508b1001ce7b5f538108f225df237\x2dpart1.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart1\x2dmpath\x2d3600508b1001ce7b5f538108f225df237.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600508b1001ce7b5f538108f225df237\x2dpart1.device: Changed dead -> plugged
>dev-dm\x2d5.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d5.device: Changed dead -> plugged
>[  190.274598] qla2xxx [0000:07:00.7]-8038:8: Cable is unplugged...
>[  190.329506] qla2xxx [0000:07:00.7]-1005:8: Cmd 0x10 aborted with timeout since ISP Abort is pending
>[  191.438569] qla2xxx [0000:07:00.6]-1015:7: cmd=0x69, waited 30020 msecs
>[  191.499262] qla2xxx [0000:07:00.6]-1119:7: MBX Command timeout for cmd 69, iocontrol=ffffffff jiffies=ffff9607 mb[0-3]=[0x0 0x0 0x0 0x0] mb7 0x0 host_status 0xffffffff hccr 0xffffffff
>[  191.638263] qla2xxx [0000:07:00.6]-803b:7: Firmware ready **** FAILED ****.
>[  193.518568] qla4xxx 0000:07:00.4: scsi9: Mailbox Cmd 0x00000026 timed out, Scheduling Adapter Reset
>[  193.598874] qla4xxx 0000:07:00.4: disabling pause transmit on port 0 & 1.
>[  193.656779] qla4xxx 0000:07:00.4: qla4xxx_probe_adapter: No iSCSI boot target configured
>[  193.730570] qla4xxx 0000:07:00.4: Device state is 0x3 = Ready
>[  194.699452] qla4xxx 0000:07:00.5: Found an ISP8022, irq 16, iobase 0x          (null)
>[  194.770926] scsi host10: qla4xxx
>[  194.874839] qla4xxx 0000:07:00.5: Configuring PCI space...
>[  194.921599] qla4xxx 0000:07:00.5: qla4_8xxx_set_drv_active(10): drv_active: 0x11110011
>[  194.988856] qla4xxx 0000:07:00.5: Device state is 0x3 = Ready
>[  195.038076] qla4xxx 0000:07:00.5: qla4xxx_request_irqs: irq 16 attached
>[  195.218553] qla4xxx 0000:07:00.4: Initializing firmware..
>[  195.630557] qla4xxx 0000:07:00.5: Initializing firmware..
>[  195.686568] qla4xxx 0000:07:00.4: qla4xxx_isr_decode_mailbox: LINK UP
>dev-disk-by\x2duuid-3cf1d9fb\x2df2dd\x2d4ffe\x2d944b\x2d8d5b353d1daa.device: Job dev-disk-by\x2duuid-3cf1d9fb\x2df2dd\x2d4ffe\x2d944b\x2d8d5b353d1daa.device/start timed out.
>dev-disk-by\x2duuid-3cf1d9fb\x2df2dd\x2d4ffe\x2d944b\x2d8d5b353d1daa.device: Job dev-disk-by\x2duuid-3cf1d9fb\x2df2dd\x2d4ffe\x2d944b\x2d8d5b353d1daa.device/start finished, result=timeout
>[[0;1;31m TIME [0m] Timed out waiting for device dev-diâ¦fe\x2d944b\x2d8d5b353d1daa.device.
>initrd-root-device.target: Job initrd-root-device.target/start finished, result=dependency
>[[0;1;33mDEPEND[0m] Dependency failed for Initrd Root Device.
>initrd-root-device.target: Job initrd-root-device.target/start failed with result 'dependency'.
>initrd-root-device.target: Triggering OnFailure= dependencies.
>emergency.target: Trying to enqueue job emergency.target/start/replace-irreversibly
>basic.target: Installed new job basic.target/stop as 61
>iscsiuio.socket: Installed new job iscsiuio.socket/stop as 67
>iscsid.socket: Installed new job iscsid.socket/stop as 68
>sysinit.target: Installed new job sysinit.target/stop as 60
>systemd-vconsole-setup.service: Installed new job systemd-vconsole-setup.service/start as 59
>emergency.target: Installed new job emergency.target/start as 55
>emergency.service: Installed new job emergency.service/start as 56
>dracut-mount.service: Job dracut-mount.service/start finished, result=canceled
>dracut-mount.service: Installed new job dracut-mount.service/stop as 65
>dracut-pre-pivot.service: Job dracut-pre-pivot.service/start finished, result=canceled
>dracut-pre-pivot.service: Installed new job dracut-pre-pivot.service/stop as 64
>initrd.target: Job initrd.target/start finished, result=canceled
>initrd.target: Installed new job initrd.target/stop as 62
>emergency.target: Enqueued job emergency.target/start as 55
>sysroot.mount: Job sysroot.mount/start finished, result=dependency
>[[0;1;33mDEPEND[0m] Dependency failed for /sysroot.
>initrd-root-fs.target: Job initrd-root-fs.target/start finished, result=dependency
>[[0;1;33mDEPEND[0m] Dependency failed for Initrd Root File System.
>initrd-parse-etc.service: Job initrd-parse-etc.service/start finished, result=dependency
>[[0;1;33mDEPEND[0m] Dependency failed for Reload Configuration from the Real Root.
>initrd-parse-etc.service: Job initrd-parse-etc.service/start failed with result 'dependency'.
>initrd-parse-etc.service: Triggering OnFailure= dependencies.
>emergency.target: Trying to enqueue job emergency.target/start/replace-irreversibly
>emergency.service: Merged into installed job emergency.service/start as 56
>iscsiuio.socket: Merged into installed job iscsiuio.socket/stop as 67
>sysinit.target: Merged into installed job sysinit.target/stop as 60
>iscsid.socket: Merged into installed job iscsid.socket/stop as 68
>basic.target: Merged into installed job basic.target/stop as 61
>systemd-vconsole-setup.service: Merged into installed job systemd-vconsole-setup.service/start as 59
>emergency.target: Merged into installed job emergency.target/start as 55
>emergency.target: Enqueued job emergency.target/start as 55
>initrd-root-fs.target: Job initrd-root-fs.target/start failed with result 'dependency'.
>initrd-root-fs.target: Triggering OnFai[  211.982503] qla4xxx 0000:07:00.5: PEX DMA Not supported 0
>lure= dependencies.
>emergency.target: Trying to enqueue job emergency.target/start/replace-irreversibly
>emergency.service: Merged into installed job emergency.service/start as 56
>iscsid.socket: Merged into installed job iscsid.socket/stop as 68
>iscsiuio.socket: Merged into installed job iscsiuio.socket/stop as 67
>systemd-vconsole-setup.service: Merged into installed job systemd-vconsole-setup.service/start as 59
>sysinit.target: Merged into installed job sysinit.target/stop as 60
>emergency.target: Merged into installed job emergency.target/start as 55
>basic.target: Merged into installed job basic.target/stop as 61
>emergency.target: Enqueued job emergency.target/start as 55
>sysroot.mount: Job sysroot.mount/start failed with result 'dependency'.
>systemd-fsck-root.service: Job systemd-fsck-root.service/start finished, result=dependency
>[[0;1;33mDEPEND[0m] Dependency failed for File System Câ¦1d9fb-f2dd-4ffe-944b-8d5b353d1daa.
>systemd-fsck-root.service: Job systemd-fsck-root.service/start failed with result 'depen21]  QLogic iSCSI HBA Driver version: 5.04.00-k6
>[  212.478521]   QLogic ISP8022 @ 0000:07:00.5, host#=10, fw=04.16.34.56917
>dency'.
>dev-disk-by\x2duuid-3cf1d9fb\x2df2dd\x2d4ffe\x2d944b\x2d8d5b353d1daa.device: Job dev-disk-by\x2duuid-3cf1d9fb\x2df2dd\x2d4ffe\x2d944b\x2d8d5b353d1daa.device/start failed with result 'timeout'.
>dracut-pre-pivot.service: Job dracut-pre-pivot.service/stop finished, result=done
>initrd.target: Job initrd.target/stop finished, result=done
>initrd-fs.target: ConditionPathExists=/etc/initrd-release succeeded.
>initrd-fs.target changed dead -> active
>initrd-fs.target: Job initrd-fs.target/start finished, result=done
>[[0;32m  OK  [0m] Reached target Initrd File Systems.
>dracut-mount.service: Job dracut-mount.service/stop finished, result=done
>systemd-vconsole-setup.service: ConditionPathExists=/dev/tty0 succeeded.
>systemd-vconsole-setup.service: Passing 0 fds to service
>systemd-vconsole-setup.service: About to execute: /usr/lib/systemd/systemd-vconsole-setup
>systemd-vconsole-setup.service: Forked /usr/lib/systemd/systemd-vconsole-setup as 1227
>systemd-vconsole-setup.service: Changed dead -> start
>         Starting Setup Virtual Console...
>iscs[ qla4xxx 0000:07:00.5: get_fw_boot_info: Get FW boot info for 0x8022 func 5
>id.socket: Changed running -> dead
>iscsid.socket: Job iscsid.socket/stop finished, result=done
>[[0;32m  OK  [0m] Closed Open-iSCSI iscsid Socket.
>iscsiuio.socket: Changed running -> dead
>iscsiuio.socket: Job iscsiuio.socket/stop finished, result=done
>[[0;32m  OK  [0m] Closed Open-iSCSI iscsiuio Socket.
>basic.target changed active -> dead
>basic.target: Job basic.target/stop finished, result=done
>[[0;32m  OK  [0m] Stopped target Basic System.
>sysinit.target changed active -> dead
>sysinit.target: Job sysinit.target/stop finished, result=done
>[[0;32m  OK  [0m] Stopped target System Initialization.
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 35 (n/a) to fd store.
>systemd-vconsole-setup.service: Executing: /usr/lib/systemd/systemd-vconsole-setup
>systemd-vconsole-setup.service: cgroup is empty
>Received SIGCHLD from PID 1227 (systemd[ a4xxx 0000:07:00.5: qla4xxx_setup_boot_info: syfsboot disabled - driver will trigger login and publish session for discovery .
>-vconsol).
>Child 1227 (systemd-vconsol) died (code=exited, status=0/SUCCESS)
>systemd-vconsole-setup.service: Child 1227 belongs to systemd-vconsole-setup.service
>systemd-vconsole-setup.service: Main process exited, code=exited, status=0/SUCCESS
>systemd-vconsole-setup.service: Changed start -> dead
>systemd-vconsole-setup.service: Job systemd-vconsole-setup.service/start finished, result=done
>[[0;32m  OK  [0m] Started Setup Virtual Console.
>systemd-journald.service: Received EPOLLHUP on stored fd 35 (stored), closing.
>emergency.service: Passing 0 fds to service
>emergency.service: About to execute: /bin/dracut-emergency
>emergency.service: Forked /bin/dracut-emergency as 1230
>emergency.service: Changed dead -> start
>         Starting Emergency Shell...
>emergency.service: Executing: /bin/dracut-emergency
>Warning: /dev/disk/by-uuid/3cf1d9fb-f2dd-4ffe-944b-8d5b353d1daa does not exist
>
>Generating "/run/initramfs/rdsosreport.txt"
>libmount event [rescan: no]
>
>
>Entering emergency mode. Exit the shell to continue.
>Type "journalctl" to view system logs.
>You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot
>after mounting them and attach it to a bug report.
>
>
>systemd-journald.service: Got notification message from PID 650 (WATCHDOG=1)
>:/# [  214.806017] QLogic iSCSI HBA Driver
>systemd-udevd.service: Got notification message from PID 781 (WATCHDOG=1)
>[  214.838807] qla4xxx 0000:07:00.5: qla4xxx_sysfs_ddb_tgt_create: sysfs entry flashnode_sess-10:0 created
>[  214.921043] qla4xxx 0000:07:00.5: qla4xxx_sysfs_ddb_tgt_create: sysfs entry flashnode_conn-10:0:0 created
>[  215.034793] qla4xxx 0000:07:00.5: qla4xxx_sysfs_ddb_tgt_create: sysfs entry flashnode_sess-10:1 created
>[  215.116776] qla4xxx 0000:07:00.5: qla4xxx_sysfs_ddb_tgt_create: sysfs entry flashnode_conn-10:1:0 created
>[  215.502022] dracut-initqueue[1128]: calling: settle
>[  216.015983] dracut-initqueue[1128]: calling: settle
>[  216.530039] dracut-initqueue[1128]: calling: settle
>[  217.043675] dracut-initqueue[1128]: calling: settle
>[  217.557874] dracut-initqueue[1128]: calling: settle
>[  218.070404] dracut-initqueue[1128]: calling: settle
>[  218.190528] scsi9: AEN 8029, mbox_sts[2]=0002, mbox_sts[3]=0005
>[  218.422479] qla4xxx 0000:07:00.4: qla4xxx_get_fwddb_entry: DDB[0] MB0 4000 Tot 2 Next 1 State 0001 ConnErr 00000000 10.162.198.21 :3260 "iqn.1992-04.com.emc:cx.fcntr073900162.a2"
>[  218.584304] dracut-initqueue[1128]: calling: settle
>[  218.618484] qla4xxx 0000:07:00.4: qla4xxx_get_fwddb_entry: DDB[1] MB0 4000 Tot 2 Next 0 State 0001 ConnErr 00000000 10.162.198.22 :3260 "iqn.1992-04.com.emc:cx.fcntr073900162.b2"
>[  218.994480] qla4xxx 0000:07:00.4: qla4xxx_get_fwddb_entry: DDB[0] MB0 4000 Tot 2 Next 1 State 0001 ConnErr 00000000 10.162.198.21 :3260 "iqn.1992-04.com.emc:cx.fcntr073900162.a2"
>[  219.097769] dracut-initqueue[1128]: calling: settle
>[  219.186481] qla4xxx 0000:07:00.4: qla4xxx_get_fwddb_entry: DDB[1] MB0 4000 Tot 2 Next 0 State 0001 ConnErr 00000000 10.162.198.22 :3260 "iqn.1992-04.com.emc:cx.fcntr073900162.b2"
>[  219.610615] dracut-initqueue[1128]: calling: settle
>[  219.783837] qla4xxx 0000:07:00.4: qla4xxx_get_fwddb_entry: DDB[0] MB0 4000 Tot 2 Next 1 State 0004 ConnErr 00000000 10.162.198.21 :3260 "iqn.1992-04.com.emc:cx.fcntr073900162.a2"
>[  219.947632] qla4xxx 0000:07:00.4: qla4xxx_get_fwddb_entry: DDB[1] MB0 4000 Tot 2 Next 0 State 0004 ConnErr 00000000 10.162.198.22 :3260 "iqn.1992-04.com.emc:cx.fcntr073900162.b2"
>[  220.124239] dracut-initqueue[1128]: calling: settle
>[  220.244609] qla4xxx 0000:07:00.4: qla4xxx_get_fwddb_entry: DDB[0] MB0 4000 Tot 2 Next 1 State 0004 ConnErr 00000000 10.162.198.21 :3260 "iqn.1992-04.com.emc:cx.fcntr073900162.a2"
>[  220.408477] qla4xxx 0000:07:00.4: qla4xxx_get_fwddb_entry: DDB[1] MB0 4000 Tot 2 Next 0 State 0004 ConnErr 00000000 10.162.198.22 :3260 "iqn.1992-04.com.emc:cx.fcntr073900162.b2"
>[  220.637844] qla4xxx 0000:07:00.4: scsi9: qla4xxx_mailbox_command: FAILED, MBOX CMD = 00000063, MBOX STS = 00004005 00000000 605ED000 00000006 00000200 00000000 00000000 00000000
>[  220.636592] dracut-initqueue[1128]: calling: settle
>[  220.800437] qla4xxx 0000:07:00.4: scsi9: qla4xxx_mailbox_command: FAILED, MBOX CMD = 00000063, MBOX STS = 00004005 00000001 605ED000 00000006 00000200 00000000 00000000 00000000
>[  220.967202] qla4xxx 0000:07:00.4: qla4xxx_sysfs_ddb_tgt_create: sysfs entry flashnode_sess-9:0 created
>[  221.046628] qla4xxx 0000:07:00.4: qla4xxx_sysfs_ddb_tgt_create: sysfs entry flashnode_conn-9:0:0 created
>[  221.136573] qla4xxx 0000:07:00.4: qla4xxx_sysfs_ddb_tgt_create: sysfs entry flashnode_sess-9:1 created
>[  221.215760] qla4xxx 0000:07:00.4: qla4xxx_sysfs_ddb_tgt_create: sysfs entry flashnode_conn-9:1:0 created
>[  221.149279] dracut-initqueue[1128]: calling: settle
>[  221.662753] dracut-initqueue[1128]: calling: settle
>[  222.176485] dracut-initqueue[1128]: calling: settle
>[  222.689540] dracut-initqueue[1128]: calling: settle
>[  223.203229] dracut-initqueue[1128]: calling: settle
>[  223.717099] dracut-initqueue[1128]: calling: settle
>[  224.230782] dracut-initqueue[1128]: calling: settle
>[  224.386484] usb 1-3: USB disconnect, device number 5
>[  224.744549] dracut-initqueue[1128]: calling: settle
>[  224.834455] usb 1-3: new high-speed USB device number 6 using xhci_hcd
>[  225.030581] usb 1-3: New USB device found, idVendor=0424, idProduct=2660
>[  225.091373] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[  225.152650] hub 1-3:1.0: USB hub found
>[  225.184492] hub 1-3:1.0: 2 ports detected
>[  225.258105] dracut-initqueue[1128]: calling: settle
>[  225.771503] dracut-initqueue[1128]: calling: settle
>[  226.285310] dracut-initqueue[1128]: calling: settle
>[  226.798859] dracut-initqueue[1128]: calling: settle
>[  227.313208] dracut-initqueue[1128]: calling: settle
>[  227.826852] dracut-initqueue[1128]: calling: settle
>[  228.340981] dracut-initqueue[1128]: calling: settle
>[  228.854510] dracut-initqueue[1128]: calling: settle
>[  229.367858] dracut-initqueue[1128]: calling: settle
>[  229.881608] dracut-initqueue[1128]: calling: settle
>[  230.394928] dracut-initqueue[1128]: calling: settle
>[  230.908254] dracut-initqueue[1128]: calling: settle
>[  231.421898] dracut-initqueue[1128]: calling: settle
>[  231.935453] dracut-initqueue[1128]: calling: settle
>[  232.449481] dracut-initqueue[1128]: calling: settle
>[  232.963575] dracut-initqueue[1128]: calling: settle
>[  233.477642] dracut-initqueue[1128]: calling: settle
>[  233.991466] dracut-initqueue[1128]: calling: settle
>[  234.504786] dracut-initqueue[1128]: calling: settle
>[  235.018794] dracut-initqueue[1128]: calling: settle
>[  235.532582] dracut-initqueue[1128]: calling: settle
>[  236.046199] dracut-initqueue[1128]: calling: settle
>[  236.559349] dracut-initqueue[1128]: calling: settle
>[  237.073056] dracut-initqueue[1128]: calling: settle
>[  237.586873] dracut-initqueue[1128]: calling: settle
>[  238.100539] dracut-initqueue[1128]: calling: settle
>[  238.537568] qla4xxx 0000:07:00.4: scsi9: qla4xxx_unblock_flash_ddb: ddb[0] unblock session
>[  238.612443] qla4xxx 0000:07:00.4: scsi9: qla4xxx_unblock_flash_ddb: ddb[0] start scan
>[  238.614367] dracut-initqueue[1128]: calling: settle
>[  238.679944] scsi 9:0:0:0: Direct-Access     DGC      VRAID            0430 PQ: 0 ANSI: 4
>[  238.750227] qla4xxx 0000:07:00.4: qla4xxx_get_fwddb_entry: DDB[0] MB0 4000 Tot 2 Next 1 State 0004 ConnErr 00000000 10.162.198.21 :3260 "iqn.1992-04.com.emc:cx.fcntr073900162.a2"
>[  238.886725] qla4xxx 0000:07:00.4: scsi9: qla4xxx_unblock_flash_ddb: ddb[1] unblock session
>[  238.956229] qla4xxx 0000:07:00.4: scsi9: qla4xxx_unblock_flash_ddb: ddb[1] start scan
>[  239.037743] qla4xxx 0000:07:00.4: qla4xxx_get_fwddb_entry: DDB[1] MB0 4000 Tot 2 Next 0 State 0004 ConnErr 00000000 10.162.198.22 :3260 "iqn.1992-04.com.emc:cx.fcntr073900162.b2"
>[  239.127908] dracut-initqueue[1128]: calling: settle
>[  239.186478] scsi 9:0:0:0: alua: supports implicit and explicit TPGS
>[  239.239605] scsi 9:0:0:0: alua: device naa.600601600a30200024fbbaf3f500e411 port group 1 rel port 3
>[  239.316808] sd 9:0:0:0: Attached scsi generic sg3 type 0
>[  239.362763] sd 9:0:0:0: alua: transition timeout set to 60 seconds
>[  239.415225] sd 9:0:0:0: alua: port group 01 state A preferred supports tolUsNA
>[  239.477401] sd 9:0:0:0: alua: port group 01 state A preferred supports tolUsNA
>[  239.539167] scsi 9:0:0:1: Direct-Access     DGC      VRAID            0430 PQ: 0 ANSI: 4
>[  239.539998] sd 9:0:0:0: [sdc] 268435456 512-byte logical blocks: (137 GB/128 GiB)
>[  239.540319] sd 9:0:0:0: [sdc] Write Protect is off
>[  239.540322] sd 9:0:0:0: [sdc] Mode Sense: 7d 00 00 08
>[  239.540936] sd 9:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[  239.549045]  sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 sdc8 sdc9
>[  239.552734] sd 9:0:0:0: [sdc] Attached SCSI disk
>[  239.922903] sd 9:0:0:0: alua: port group 01 state A preferred supports tolUsNA
>[  239.640807] dracut-initqueue[1128]: calling: settle
>dev-mapper-3600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dmpath\x2d3600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-dm\x2d7.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d7.device: Changed dead -> plugged
>[  240.058415] scsi 9:0:0:1: alua: supports implicit and explicit TPGS
>[  240.112328] scsi 9:0:0:1: alua: device naa.600601600a3020002282d7e2c5a6e411 port group 1 rel port 3
>dev-mapper-3600601600a30200024fbbaf3f500e411\x2dpart9.device: Changed dead -> pl[  240.191940] sd 9:0:0:1: Attached scsi generic sg4 type 0
>ugged
>dev-disk-[  240.212151] sd 9:0:0:1: [sdd] 67108864 512-byte logical blocks: (34.4 GB/32.0 GiB)
>[  240.212455] sd 9:0:0:1: [sdd] Write Protect is off
>by\x2dpartuuid-a[  240.212457] sd 9:0:0:1: [sdd] Mode Sense: 7d 00 00 08
>[  240.212956] sd 9:0:0:1: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[  240.220577] sd 9:0:0:1: [sdd] Attached SCSI disk
>5e345ec\x2d662f\x2d4b84\x2d87eb\x2d15e6b313527b.device: Changed dead -> plugged
>dev-disk-by\x2d[  240.502602] sd 9:0:0:1: alua: transition timeout set to 60 seconds
>partlabel-BIOS\x[  240.503651] scsi 9:0:1:0: Direct-Access     DGC      VRAID            0430 PQ: 0 ANSI: 4
>5cx20boot\x5cx20[  240.626109] sd 9:0:0:1: alua: port group 01 state A preferred supports tolUsNA
>partition.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411\x2dpart9.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411\x2dpart9.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart9\x2dmpath\x2d3600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411\x2dpart9.device: Changed dead -> plugged
>dev-dm\x2d16.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d16.device: Changed dead -> plugged
>dev-mapper-3600601600a30200024fbbaf3f500e411\x2dpart7.device: Changed dead -> plugged
>dev-disk-by\x2dpartuuid-a5045f98\x2d3193\x2d4b97\x2db171\x2d793eee0d8ee2.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411\x2dpart7.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411\x2dpart7.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart7\x2dmpath\x2d3600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411\x2dpart7.device: Changed dead -> plugged
>dev-dm\x2d14.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d14.device: Changed dead -> plugged
>dev-mapper-3600601600a30200024fbbaf3f500e411\x2dpart8.device: Changed dead -> plugged
>dev-disk-by\x2dpartuuid-9421789d\x2de3e6\x2d4a70\x2da791\x2dc29b0d1237ae.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411\x2dpart8.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411\x2dpart8.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart8\x2dmpath\x2d3600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411\x2dpart8.device: Changed dead -> p[  240.71043si 9:0:1:0: alua: supports implicit and explicit TPGS
>lugged
>dev-dm\x[  240.754351] raid6: sse2x1   gen()  4207 MB/s
>2d15.device: Cha[  240.822345] raid6: sse2x1   xor()  2988 MB/s
>nged dead -> plu[  240.890347] raid6: sse2x2   gen()  5032 MB/s
>gged
>sys-device[  240.958338] raid6: sse2x2   xor()  3269 MB/s
>s-virtual-block-[  241.026347] raid6: sse2x4   gen()  5944 MB/s
>dm\x2d15.device:[  241.094338] raid6: sse2x4   xor()  3678 MB/s
> Changed dead ->[  241.162338] raid6: avx2x1   gen()  8268 MB/s
> plugged
>dev-ma[  241.230339] raid6: avx2x1   xor()  5568 MB/s
>pper-3600601600a[  241.298354] raid6: avx2x2   gen()  9659 MB/s
>30200024fbbaf3f5[  241.366342] raid6: avx2x2   xor()  5829 MB/s
>00e411\x2dpart4.[  241.434340] raid6: avx2x4   gen() 10979 MB/s
>device: Changed [  241.502339] raid6: avx2x4   xor()  6958 MB/s
>dead -> plugged
[  241.502340] raid6: using algorithm avx2x4 gen() 10979 MB/s
>
>dev-disk-by\x2d[  241.502341] raid6: .... xor() 6958 MB/s, rmw enabled
>uuid-e8fa1659\x2[  241.502342] raid6: using avx2x2 recovery algorithm
>d1807\x2d4d3d\x2[  241.766420] xor: automatically using best checksumming function   avx       
>dae08\x2ddd299f9d9738.device: Ch[  241.867516] scsi 9:0:1:0: alua: device naa.600601600a30200024fbbaf3f500e411 port group 2 rel port b
>anged dead -> plugged
>dev-disk-by\x2dpartuuid-47eb589c\x2dea05\x2d4a0c\x2d9243\x2d8281809d41bc.[  241.945399] sd 9:0:1:0: Attached scsi generic sg5 type 0
>device: Changed [  241.954804] sd 9:0:1:0: alua: transition timeout set to 60 seconds
>dead -> plugged
[  241.954810] sd 9:0:1:0: alua: port group 02 state N non-preferred supports tolUsNA
>
>dev-disk-by\x2d[  241.999842] sd 9:0:1:0: [sde] 268435456 512-byte logical blocks: (137 GB/128 GiB)
>partlabel-Linux\[  242.000099] sd 9:0:1:0: [sde] Write Protect is off
>[  242.000101] sd 9:0:1:0: [sde] Mode Sense: 7d 00 00 08
>[  242.000611] sd 9:0:1:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[  242.008910]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9
>[  242.012531] sd 9:0:1:0: [sde] Attached SCSI disk
>[  242.083004] sd 9:0:0:1: alua: port group 01 state A preferred supports tolUsNA
>[  242.134837] sd 9:0:0:0: alua: port group 01 state A preferred supports tolUsNA
>x5cx20filesystem.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411\x2dpart4.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411\x2dpart4.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart4\x2dmpath\x2d3600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411\x2dpart4.device: Changed dead -> plugged
>d[  242.558951] scsi 9:0:1:1: Direct-Access     DGC      VRAID            0430 PQ: 0 ANSI: 4
>ev-dm\x2d11.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d11.device: Changed dead -> plugged
>dev-mapper-3600601600a3020002282d7e2c5a6e411.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600601600a3020002282d7e2c5a6e411.device: Changed dead -> plugged
>dev-[  242.630387] Btrfs loaded, crc32c=crc32c-intel, assert=on
>disk-by\x2did-scsi\x2d3600601600a3020002282d7e2c5a6e411.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dmpath\x2d3600601600a3020002282d7e2c5a6e411.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600601600a3020002282d7e2c5a6e411.device: Changed dead -> plugged
>dev-dm\x2d17.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d17.device: Changed dead -> plugged
>[  242.706389] scsi 9:0:1:1: alua: supports implicit and explicit TPGS
>[  242.761099] scsi 9:0:1:1: alua: device naa.600601600a3020002282d7e2c5a6e411 port group 2 rel port b
>[  242.761172] BTRFS: device fsid 6975955d-a7fa-422a-b425-15e60ca5192d devid 1 transid 79 /dev/dm-13
>dev-disk-by\x2dp[  242.841116] BTRFS: device fsid a6a7c511-6afa-4b55-a29e-7621fe21ea60 devid 1 transid 62905 /dev/dm-8
>artlabel-Linux\x[  242.918476] BTRFS: device fsid 63751805-6abc-46a3-a66f-427920dece4d devid 1 transid 120102 /dev/dm-12
>5cx20filesystem.[  242.998201] BTRFS: device fsid b27db34b-b4ca-4aee-aa1c-274a73201cee devid 1 transid 57768 /dev/dm-10
>device: Dev dev-[  243.077730] BTRFS: device fsid 3cf1d9fb-f2dd-4ffe-944b-8d5b353d1daa devid 1 transid 104360 /dev/dm-9
>disk-by\x2dpartlabel-Linux\x5cx20filesystem.device appeared twice with different sysfs paths /sys/devices/virtua[  243.240354] sd 9:0:1:1: Attached scsi generic sg6 type 0
>[  243.250852] sd 9:0:1:1: alua: transition timeout set to 60 seconds
>l/block/dm-11 an[  243.250858] sd 9:0:1:1: alua: port group 02 state N non-preferred supports tolUsNA
>[  243.296045] sd 9:0:1:1: [sdf] 67108864 512-byte logical blocks: (34.4 GB/32.0 GiB)
>d /sys/devices/v[  243.296301] sd 9:0:1:1: [sdf] Write Protect is off
>[  243.296303] sd 9:0:1:1: [sdf] Mode Sense: 7d 00 00 08
>[  243.296808] sd 9:0:1:1: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[  243.303813] sd 9:0:1:1: [sdf] Attached SCSI disk
>[  243.472291] sd 9:0:0:1: alua: port group 01 state A preferred supports tolUsNA
>irtual/block/dm-13
>dev-mapper-3600601600a30200024fbbaf3f500e411\x2dpart6.device: Changed dead -> plugged
>dev-disk-by\x2duuid-6975955d\x2da7fa\x2d422a\x2db425\x2d15e60ca5192d.device: Changed dead -> plugged
>dev-disk-by\x2dpartuuid-8d3c47c8\x2d54e9\x2d47bb\x2da056\x2dfb7374e5e461.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411\x2dpart6.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411\x2dpart6.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart6\x2dmpath\x2d3600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411\x2dpart6.device: Changed dead -> plugged
>dev-dm\x2d13.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d13.device: Changed dead -> plugged
>Received SIGCHLD from PID 1128 (dracut-initqueu).
>Child 1128 (dracut-initqueu) died (code=exited, status=0/SUCCESS)
>dracut-initqueue.service: Child 1128 belongs to dracut-initqueue.service
>dracut-initqueue.service: Main process exited, code=exited, status=0/SUCCESS
>dracut-initqueue.service: Changed start -> exited
>dracut-initqueue.service: Job dracut-initqueue.service/start finished, result=done
>[[0;32m  OK  [0m] Started dracut initqueue hook.
>systemd-journald.service: Received EPOLLHUP on stored fd 39 (stored), closing.
>dev-mapper-3600601600a30200024fbbaf3f500e411\x2dpart1.device: Changed dead -> plugged
>dev-disk-by\x2duuid-a6a7c511\x2d6afa\x2d4b55\x2da29e\x2d7621fe21ea60.device: Changed dead -> plugged
>dev-disk-by\x2dpartuuid-ba7c2c27\x2df059\x2d4bdf\x2dbe6c\x2d00653c1ef383.device: Changed dead -> plugged
>dev-disk-by\x2dpartlabel-primary.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411\x2dpart1.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411\x2dpart1.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart1\x2dmpath\x2d3600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411\x2dpart1.device: Changed dead -> plugged
>dev-dm\x2d8.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d8.device: Changed dead -> plugged
>systemd-journald.service: Received EPOLLHUP on stored fd 40 (stored), closing.
>dev-mapper-3600601600a30200024fbbaf3f500e411\x2dpart5.device: Changed dead -> plugged
>dev-disk-by\x2duuid-63751805\x2d6abc\x2d46a3\x2da66f\x2d427920dece4d.device: Changed dead -> plugged
>dev-disk-by\x2dpartuuid-b6a4d740\x2d2111\x2d4f7e\x2d925d\x2da9e2dc6619de.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411\x2dpart5.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411\x2dpart5.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart5\x2dmpath\x2d3600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411\x2dpart5.device: Changed dead -> plugged
>dev-dm\x2d12.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d12.device: Changed dead -> plugged
>dev-mapper-3600601600a30200024fbbaf3f500e411\x2dpart3.device: Changed dead -> plugged
>dev-disk-by\x2duuid-b27db34b\x2db4ca\x2d4aee\x2daa1c\x2d274a73201cee.device: Changed dead -> plugged
>dev-disk-by\x2dpartuuid-eda1f940\x2d620a\x2d4c76\x2dba20\x2d2b760207c21f.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411\x2dpart3.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411\x2dpart3.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart3\x2dmpath\x2d3600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411\x2dpart3.device: Changed dead -> plugged
>dev-dm\x2d10.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d10.device: Changed dead -> plugged
>dev-disk-by\x2dpartlabel-Linux\x5cx20filesystem.device: Dev dev-disk-by\x2dpartlabel-Linux\x5cx20filesystem.device appeared twice with different sysfs paths /sys/devices/virtual/block/dm-11 and /sys/devices/virtual/block/dm-9
>dev-mapper-3600601600a30200024fbbaf3f500e411\x2dpart2.device: Changed dead -> plugged
>dev-disk-by\x2duuid-3cf1d9fb\x2df2dd\x2d4ffe\x2d944b\x2d8d5b353d1daa.device: Changed dead -> plugged
>sysroot.mount: Trying to enqueue job sysroot.mount/start/fail
>dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411\x2dpart2.device: Installed new job dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411\x2dpart2.device/start as 108
>dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411\x2dpart2.device: Installed new job dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411\x2dpart2.device/start as 110
>systemd-fsck-root.service: Installed new job systemd-fsck-root.service/start as 101
>dev-disk-by\x2dpartuuid-9a0c36dc\x2d08e3\x2d42ef\x2d90fb\x2dc830f4a18f42.device: Installed new job dev-disk-by\x2dpartuuid-9a0c36dc\x2d08e3\x2d42ef\x2d90fb\x2dc830f4a18f42.device/start as 106
>dev-disk-by\x2did-dm\x2duuid\x2dpart2\x2dmpath\x2d3600601600a30200024fbbaf3f500e411.device: Installed new job dev-disk-by\x2did-dm\x2duuid\x2dpart2\x2dmpath\x2d3600601600a30200024fbbaf3f500e411.device/start as 109
>dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411\x2dpart2.device: Installed new job dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411\x2dpart2.device/start as 107
>dev-dm\x2d9.device: Installed new job dev-dm\x2d9.device/start as 112
>sys-devices-virtual-block-dm\x2d9.device: Installed new job sys-devices-virtual-block-dm\x2d9.device/start as 105
>sysroot.mount: Installed new job sysroot.mount/start as 100
>sysroot.mount: Enqueued job sysroot.mount/start as 100
>dev-disk-by\x2dpartuuid-9a0c36dc\x2d08e3\x2d42ef\x2d90fb\x2dc830f4a18f42.device: Changed dead -> plugged
>dev-disk-by\x2dpartuuid-9a0c36dc\x2d08e3\x2d42ef\x2d90fb\x2dc830f4a18f42.device: Job dev-disk-by\x2dpartuuid-9a0c36dc\x2d08e3\x2d42ef\x2d90fb\x2dc830f4a18f42.device/start finished, result=done
>dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411\x2dpart2.device: Changed dead -> plugged
>dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411\x2dpart2.device: Job dev-disk-by\x2did-wwn\x2d0x600601600a30200024fbbaf3f500e411\x2dpart2.device/start finished, result=done
>dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411\x2dpart2.device: Changed dead -> plugged
>dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411\x2dpart2.device: Job dev-disk-by\x2did-scsi\x2d3600601600a30200024fbbaf3f500e411\x2dpart2.device/start finished, result=done
>dev-disk-by\x2did-dm\x2duuid\x2dpart2\x2dmpath\x2d3600601600a30200024fbbaf3f500e411.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2duuid\x2dpart2\x2dmpath\x2d3600601600a30200024fbbaf3f500e411.device: Job dev-disk-by\x2did-dm\x2d[  245.8718 BTRFS info (device dm-9): disk space caching is enabled
>uuid\x2dpart2\x2dmpath\x2d3600601600a30200024fbb[  246.316732] BTRFS info (device dm-9): has skinny extents
>af3f500e411.device/start finished, result=done
>dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411\x2dpart2.device: Changed dead -> plugged
>dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411\x2dpart2.device: Job dev-disk-by\x2did-dm\x2dname\x2d3600601600a30200024fbbaf3f500e411\x2dpart2.device/start finished, result=done
>dev-dm\x2d9.device: Changed dead -> plugged
>dev-dm\x2d9.device: Job dev-dm\x2d9.device/start finished, result=done
>sys-devices-virtual-block-dm\x2d9.device: Changed dead -> plugged
>sys-devices-virtual-block-dm\x2d9.device: Job sys-devices-virtual-block-dm\x2d9.device/start finished, result=done
>remote-fs-pre.target changed dead -> active
>remote-fs-pre.target: Job remote-fs-pre.target/start finished, result=done
>[[0;32m  OK  [0m] Reached target Remote File Systems (Pre).
>remote-fs.target changed dead -> active
>remote-fs.target: Job remote-fs.target/start finished, result=done
>[[0;32m  OK  [0m] Reached target Remote File Systems.
>dracut-pre-mount.service: ConditionKernelCommandLine=|rd.break=pre-mount failed.
>dracut-pre-mount.service: ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-mount failed.
>dracut-pre-mount.service: ConditionPathExists=/usr/lib/initrd-release succeeded.
>dracut-pre-mount.service: Starting requested but condition failed. Not starting unit.
>dracut-pre-mount.service: Job dracut-pre-mount.service/start finished, result=done
>systemd-fsck-root.service: Passing 0 fds to service
>systemd-fsck-root.service: About to execute: /usr/lib/systemd/systemd-fsck /dev/disk/by-uuid/3cf1d9fb-f2dd-4ffe-944b-8d5b353d1daa
>systemd-fsck-root.service: Forked /usr/lib/systemd/systemd-fsck as 1756
>systemd-fsck-root.service: Changed dead -> start
>         Starting File System Check on /dev/â¦9fb-f2dd-4ffe-944b-8d5b353d1daa...
>systemd-fsck-root.service: Executing: /usr/lib/systemd/systemd-fsck /dev/disk/by-uuid/3cf1d9fb-f2dd-4ffe-944b-8d5b353d1daa
>systemd-journald.service: Got notification message from PID 650 (FDSTORE=1)
>systemd-journald.service: Added fd 35 (n/a) to fd store.
>libmount event [rescan: no]
>systemd-journald.service: Received EPOLLHUP on stored fd 35 (stored), closing.
>Received SIGCHLD from PID 1756 (systemd-fsck).
>Child 1756 (systemd-fsck) died (code=exited, status=0/SUCCESS)
>systemd-fsck-root.service: Child 1756 belongs to systemd-fsck-root.service
>systemd-fsck-root.service: Main process exited, code=exited, status=0/SUCCESS
>systemd-fsck-root.service: Changed start -> exited
>systemd-fsck-root.service: Job systemd-fsck-root.service/start finished, result=done
>[[0;32m  OK  [0m] Started File System Check on /dev/dâ¦1d9fb-f2dd-4ffe-944b-8d5b353d1daa.
>sysroot.mount: About to execute: /usr/bin/mount /dev/disk/by-uuid/3cf1d9fb-f2dd-4ffe-944b-8d5b353d1daa /sysroot -o ro
>sysroot.mount: Forked /usr/bin/mount as 1759
>sysroot.mount: Changed dead -> mounting
>         Mounting /sysroot...
>sysroot.mount: Executing: /usr/bin/mount /dev/disk/by-uuid/3cf1d9fb-f2dd-4ffe-944b-8d5b353d1daa /sysroot -o ro
>libmount event [rescan: no]
>libmount event [rescan: yes]
>sysroot.mount: Changed mounting -> mounting-done
>sysroot.mount: Job sysroot.mount/start finished, result=done
>[[0;32m  OK  [0m] Mounted /sysroot.
>Received SIGCHLD from PID 1759 (mount).
>Child 1759 (mount) died (code=exited, status=0/SUCCESS)
>sysroot.mount: Child 1759 belongs to sysroot.mount
>sysroot.mount: Mount process exited, code=exited status=0
>sysroot.mount: Changed mounting-done -> mounted
>
>:/# 
>:/# 
>:/# 
>:/# syts s  stemctl status default.target
>
Accepted new private connection.
>Got message type=method_call sender=n/a destination=org.freedesktop.systemd1 object=/org/freedesktop/systemd1/unit/default_2etarget interface=org.freedesktop.DBus.Properties member=GetAll cookie=1 reply_cookie=0 error=n/a
>Preset files don't specify rule for initrd.target. Enabling.
>Sent message type=method_return sender=n/a destination=n/a object=n/a interface=n/a member=n/a cookie=1 reply_cookie=1 error=n/a
>â initrd.target - Initrd Default Target[m
>   Loaded: loaded (/usr/lib/systemd/system/initrd.target; static; vendor preset:[m
>   Active: inactive (dead)[m
>     Docs: man:systemd.special(7)[m
>Got disconnect on private connection.
>[7mlines 1-4/4 (END)[27m[K
[K:/# systemctl status [  274.726314] usb 1-3: USB disconnect, device number 6
>isystemd-udevd.service: Got notification message from PID 781 (WATCHDOG=1)
>nit[  275.174287] usb 1-3: new high-speed USB device number 7 using xhci_hcd
>r[  275.370405] usb 1-3: New USB device found, idVendor=0424, idProduct=2660
>[  275.430779] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>d[  275.492152] hub 1-3:1.0: USB hub found
>[  275.524367] hub 1-3:1.0: 2 ports detected
>.target
>
Accepted new private connection.
>Got message type=method_call sender=n/a destination=org.freedesktop.systemd1 object=/org/freedesktop/systemd1/unit/initrd_2etarget interface=org.freedesktop.DBus.Properties member=GetAll cookie=1 reply_cookie=0 error=n/a
>Sent message type=method_return sender=n/a destination=n/a object=n/a interface=n/a member=n/a cookie=1 reply_cookie=1 error=n/a
>Got disconnect on private connection.
>â initrd.target - Initrd Default Target[m
>   Loaded: loaded (/usr/lib/systemd/system/initrd.target; static; vendor preset:[m
>   Active: inactive (dead)[m
>     Docs: man:systemd.special(7)[m
>[7mlines 1-4/4 (END)[27m[K
[K:/# systemd ctl status initrd-root-fs.target
>
Accepted new private connection.
>Got message type=method_call sender=n/a destination=org.freedesktop.systemd1 object=/org/freedesktop/systemd1/unit/initrd_2droot_2dfs_2etarget interface=org.freedesktop.DBus.Properties member=GetAll cookie=1 reply_cookie=0 error=n/a
>Preset files don't specify rule for initrd-root-fs.target. Enabling.
>Sent message type=method_return sender=n/a destination=n/a object=n/a interface=n/a member=n/a cookie=1 reply_cookie=1 error=n/a
>Got disconnect on private connection.â initrd-root-fs.target - Initrd Root File System[m
>   Loaded: loaded (/usr/lib/systemd/system/initrd-root-fs.target; static; vendor[m
>   Active: inactive (dead)[m
>     Docs: man:systemd.special(7)[m
>
>[7mlines 1-4/4 (END)[27m[K
[K
[K[7mlines 1-4/4 (END)[27m[K
[K:/# systemctl status emergensystemd-journald.service: Got notification message from PID 650 (WATCHDOG=1)
>cy[  325.062137] usb 1-3: USB disconnect, device number 7
>systemd-udevd.service: Got notification message from PID 781 (WATCHDOG=1)
>[  325.514105] usb 1-3: new high-speed USB device number 8 using xhci_hcd
>[  325.710222] usb 1-3: New USB device found, idVendor=0424, idProduct=2660
>[  325.771464] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[  325.833804] hub 1-3:1.0: USB hub found
>[  325.866679] hub 1-3:1.0: 2 ports detected
>.target
>
Accepted new private connection.
>Got message type=method_call sender=n/a destination=org.freedesktop.systemd1 object=/org/freedesktop/systemd1/unit/emergency_2etarget interface=org.freedesktop.DBus.Properties member=GetAll cookie=1 reply_cookie=0 error=n/a
>Preset files don't specify rule for emergency.target. Enabling.
>Sent message type=method_return sender=n/a destination=n/a object=n/a interface=n/a member=n/a cookie=1 reply_cookie=1 error=n/a
>Got disconnect on private connection.â emergency.target - Emergency Mode[m
>   Loaded: loaded (/usr/lib/systemd/system/emergency.target; static; vendor pres[m
>   Active: inactive (dead)[m
>     Docs: man:systemd.special(7)[m
>
>[7mlines 1-4/4 (END)[27m[K
[K:/# systemctl status emergency.servuice    ice
>
Accepted new private connection.
>Got message type=method_call sender=n/a destination=org.freedesktop.systemd1 object=/org/freedesktop/systemd1/unit/emergency_2eservice interface=org.freedesktop.DBus.Properties member=GetAll cookie=1 reply_cookie=0 error=n/a
>Preset files don't specify rule for emergency.service. Enabling.
>Sent message type=method_return sender=n/a destination=n/a object=n/a interface=n/a member=n/a cookie=1 reply_cookie=1 error=n/a
>Got message type=method_call sender=n/a destination=org.freedesktop.systemd1 object=/org/freedesktop/systemd1 interface=org.freedesktop.systemd1.Manager member=GetUnitProcesses cookie=2 reply_cookie=0 error=n/a
>Sent message type=method_return sender=n/a destination=n/a object=n/a interface=n/a member=n/a cookie=2 reply_cookie=2 error=n/a
>Got disconnect on private connection.
>â emergency.service - Emergency Shell[m
>   Loaded: loaded (/usr/lib/systemd/system/emergency.service; static; vendor pre[m
>   Active: activating (start) since Fri 2017-10-06 14:04:19 CEST; 2min 8s ago[m
> Main PID: 1230 (sh)[m
>    Tasks: 3 (limit: 11059)[m
>   CGroup: /system.slice/emergency.service[m
>           ââ1230 sh -i -l[m
>           ââ1828 systemctl status emergency.service[m
>           ââ1829 less[m
>[7mlines 1-9/9 (END)[27m[K
[K:/# systemct
[5@(arg: 1) systemct
(arg: 6) systemct
[5P:/# systemctllllll        list-jop bs
>Accepted new private connection.
>Got message type=method_call sender=n/a destination=org.freedesktop.systemd1 object=/org/freedesktop/systemd1 interface=org.freedesktop.systemd1.Manager member=ListJobs cookie=1 reply_cookie=0 error=n/a
>Sent message type=method_return sender=n/a destination=n/a object=n/a interface=n/a member=n/a cookie=1 reply_cookie=1 error=n/a
>Got disconnect on private connection.
>
JOB UNIT              TYPE  STATE  [m
> 55 emergency.target  start waiting[m
> 56 [0;1;39memergency.service[0m start [0;1;39mrunning[0m[m
>[m
>[0;1;39m2 jobs listed[0m.[m
>
[K:/# [  390.409906] usb 1-3: USB disconnect, device number 8
>systemd-udevd.service: Got notification message from PID 781 (WATCHDOG=1)
>[  390.857881] usb 1-3: new high-speed USB device number 9 using xhci_hcd
>[  391.049996] usb 1-3: New USB device found, idVendor=0424, idProduct=2660
>[  391.110743] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[  391.173318] hub 1-3:1.0: USB hub found
>[  391.205236] hub 1-3:1.0: 2 ports detected
>
>:/# systemd-journald.service: Got notification message from PID 650 (WATCHDOG=1)
>[  440.745753] usb 1-3: USB disconnect, device number 9
>systemd-udevd.service: Got notification message from PID 781 (WATCHDOG=1)
>[  441.193707] usb 1-3: new high-speed USB device number 10 using xhci_hcd
>[  441.389825] usb 1-3: New USB device found, idVendor=0424, idProduct=2660
>[  441.451285] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[  441.513222] hub 1-3:1.0: USB hub found
>[  441.544978] hub 1-3:1.0: 2 ports detected
>
>:/# 
>:/# sysgte   temd-cgf ls
>
Control group /:[m
>-.slice[m
>ââinit.scope[m
>â ââ1 /init showopts[m
>ââsystem.slice[m
>  ââiscsiuio.service[m
>  â ââ1125 /sbin/iscsiuio[m
>  ââemergency.service[m
>  â ââ1230 sh -i -l[m
>  â ââ1867 systemd-cgls[m
>  â ââ1868 less[m
>  ââiscsid.service[m
>  â ââ1127 /sbin/iscsid -f[m
>  ââmultipathd.service[m
>  â ââ1123 /sbin/multipathd -s -d[m
>  ââsystemd-udevd.service[m
>  â ââ781 /usr/lib/systemd/systemd-udevd[m
>  ââsystemd-journald.service[m
>  â ââ650 /usr/lib/systemd/systemd-journald[m
>  ââhaveged.service[m
>    ââ643 /usr/sbin/haveged -w 1024 -v 0 -F[m
>
[K:/# systemd-cgls -a
>
Control group /:[m
>-.slice[m
>ââinit.scope[m
>â ââ1 /init showopts[m
>ââsystem.slice[m
>  ââiscsiuio.service[m
>  â ââ1125 /sbin/iscsiuio[m
>  ââemergency.service[m
>  â ââ1230 sh -i -l[m
>  â ââ1881 systemd-cgls -a[m
>  â ââ1882 less[m
>  ââdracut-initqueue.service[m
>  ââiscsid.service[m
>  â ââ1127 /sbin/iscsid -f[m
>  ââsystemd-modules-load.service[m
>  ââdracut-pre-udev.service[m
>  ââmultipathd.service[m
>  â ââ1123 /sbin/multipathd -s -d[m
>  ââsysroot.mount[m
>  ââdracut-pre-trigger.service[m
>  ââsystemd-fsck-root.service[m
>  ââsystemd-udevd.service[m
>  â ââ781 /usr/lib/systemd/systemd-udevd[m
>[7mlines 1-23[27m[K
[K [KESCESC[K[[[KBB
[K  ââsystemd-tmpfiles-setup-dev.service[m
>[7mlines 2-24[27m[K
[K [KESCESC[K[[[KBB
[K  ââsystemd-journald.service[m
>[7mlines 3-25[27m[K
[K [KESCESC[K[[[KBB
[K  â ââ650 /usr/lib/systemd/systemd-journald[m
>[7mlines 4-26[27m[K
[K [KESCESC[K[[[KBB
[K  ââdracut-cmdline.service[m
>[7mlines 5-27[27m[K
[K [KESCESC[K[[[KBB
[K  ââhaveged.service[m
>[7mlines 6-28[27m[K
[K [KESCESC[K[[[KBB
[K  â ââ643 /usr/sbin/haveged -w 1024 -v 0 -F[m
>[7mlines 7-29[27m[K
[K [KESCESC[K[[[KBB
[K  ââkmod-static-nodes.service[m
>[7mlines 8-30[27m[K
[K [KESCESC[K[[[KBB
[K  ââsystemd-sysctl.service[m
>[7mlines 9-31[27m[K
[K [KESCESC[K[[[KBB
[K  ââ-.mount[m
>[7mlines 10-32[27m[K
[K [KESCESC[K[[[KBB
[K  ââsystemd-udev-trigger.service[m
>[7mlines 11-33[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K [KESCESC[K[[[KBB
[K
[K[7mlines 11-33/33 (END)[27m[K
[K:/# cat /proc/mounts 
>rootfs / rootfs rw 0 0
>sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
>proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
>devtmpfs /dev devtmpfs rw,nosuid,size=24651344k,nr_inodes=6162836,mode=755 0 0
>securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
>tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
>devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
>tmpfs /run tmpfs rw,nosuid,nodev,mode=755 0 0
>tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0
>cgroup /sys/fs/cgroup/unified cgroup2 rw,nosuid,nodev,noexec,relatime 0 0
>cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,name=systemd 0 0
>pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0
>cgroup /sys/fs/cgroup/rdma cgroup rw,nosuid,nodev,noexec,relatime,rdma 0 0
>cgroup /sys/fs/cgroup/net_cls,net_prio cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio 0 0
>cgroup /sys/fs/cgroup/memory cgroup rw,nosuid,nodev,noexec,relatime,memory 0 0
>cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
>cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
>cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0
>cgroup /sys/fs/cgroup/hugetlb cgroup rw,nosuid,nodev,noexec,relatime,hugetlb 0 0
>cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
>cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
>cgroup /sys/fs/cgroup/pids cgroup rw,nosuid,nodev,noexec,relatime,pids 0 0
>cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0
>/dev/mapper/3600601600a30200024fbbaf3f500e411-part2 /sysroot btrfs ro,relatime,space_cache,subvolid=257,subvol=/@ 0 0
>:/# [  491.081559] usb 1-3: USB disconnect, device number 10
>systemd-udevd.service: Got notification message from PID 781 (WATCHDOG=1)
>systemd-journald.service: Got notification message from PID 650 (WATCHDOG=1)
>[  491.529537] usb 1-3: new high-speed USB device number 11 using xhci_hcd
>[  491.725654] usb 1-3: New USB device found, idVendor=0424, idProduct=2660
>[  491.787690] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[  491.850212] hub 1-3:1.0: USB hub found
>[  491.882873] hub 1-3:1.0: 2 ports detected
>
>:/# exit
>logout
>Received SIGCHLD from PID 1230 (sh).
>Child 1230 (sh) died (code=exited, status=0/SUCCESS)
>emergency.service: Child 1230 belongs to emergency.service
>emergency.service: Main process exited, code=exited, status=0/SUCCESS
>emergency.service: About to execute: /usr/bin/systemctl --fail --no-block default
>emergency.service: Forked /usr/bin/systemctl as 1898
>emergency.service: Changed start -> stop-post
>emergency.service: Executing: /usr/bin/systemctl --fail --no-block default
>Accepted new private connection.
>Got message type=method_call sender=n/a destination=org.freedesktop.systemd1 object=/org/freedesktop/systemd1 interface=org.freedesktop.systemd1.Manager member=StartUnit cookie=1 reply_cookie=0 error=n/a
>initrd.target: TrReceived SIGCHLD from PID 1898 (systemctl).
>Child 1898 (systemctl) died (code=exited, status=4/NOPERMISSION)
>emergency.service: Child 1898 belongs to emergency.service
>emergency.service: Control process exited, code=exited status=4
>emergency.service: Got final SIGCHLD for state stop-post.
>emergency.service: Changed stop-post -> dead
>emergency.service: Job emergency.service/start finished, result=done
>[[0;32m  OK  [0m] Started Emergency Shell.
>emergency.target changed dead -> active
>emergency.target: Job emergency.target/start finished, result=done
>[[0;32m  OK  [0m] Reached target Emergency Mode.
>Startup finished in 27.762s (kernel) + 0 (initrd) + 8min 13.620s (userspace) = 8min 41.382s.
>[  556.425349] usb 1-3: USB disconnect, device number 11
>systemd-udevd.service: Got notification message from PID 781 (WATCHDOG=1)

Actions: View

Attachments on bug 1054473: 737288 | 743359 | 743540