Attachment 88761 Details for Bug 182541

Dmesg output

dmesg.txt (text/plain), 23.87 KB, created by Renato Yamane on 2006-06-12 18:22:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Renato Yamane

Created: 2006-06-12 18:22:09 UTC

Size: 23.87 KB

patch

obsolete

>Linux version 2.6.16.13-4-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Wed May 3 04:53:23 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7dfffc (usable)
> BIOS-e820: 000000003f7dfffc - 000000003f7fffc0 (ACPI data)
> BIOS-e820: 000000003f7fffc0 - 000000003f800000 (ACPI NVS)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>No mptable found.
>On node 0 totalpages: 260063
>  DMA zone: 4096 pages, LIFO batch:0
>  DMA32 zone: 0 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 30687 pages, LIFO batch:7
>DMI 2.3 present.
>IO/L-APIC allowed because system is MP or new enough
>ACPI: RSDP (v000 TOSINV                                ) @ 0x000e5010
>ACPI: RSDT (v001 INSYDE RSDT_000 0x00000100 ABCD 0x00010200) @ 0x3f7f86c7
>ACPI: FADT (v001 TOSINV FACP_000 0x00000100 0000 0x00010200) @ 0x3f7ffb30
>ACPI: MCFG (v001 INSYDE MCFG_000 0x30303030 0000 0x30303030) @ 0x3f7ffbc0
>ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x3f7f88b5
>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x3f7f86fb
>ACPI: DSDT (v001 TOSINV SONOMA   0x00001004 INTL 0x02002036) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 40000000 (gap: 3f800000:c0700000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda5 vga=0x314    resume=/dev/sda6  splash=silent
>bootsplash: silent mode.
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 1862.242 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1025536k/1040252k available (1491k kernel code, 13996k reserved, 607k data, 156k init, 122748k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3729.50 BogoMIPS (lpj=7459006)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f9ff 00000000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 2362k freed
> not found!
>ACPI: setting ELCR to 0200 (from 0c20)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xea7d4, last bus=5
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1300-133f claimed by ICH6 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #06 (-#09) is hidden behind transparent bridge #05 (-#05) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *5 11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *11
>ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11
>ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.
>ACPI: Power Resource [PFA1] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 9 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>Setting up standard PCI resources
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: c000-dfff
>  MEM window: cc000000-cfffffff
>  PREFETCH window: 9c000000-9fffffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: a000-bfff
>  MEM window: c8000000-cbffffff
>  PREFETCH window: 98000000-9bffffff
>PCI: Bus 6, cardbus bridge: 0000:05:06.0
>  IO window: 00008000-000080ff
>  IO window: 00008400-000084ff
>  PREFETCH window: 88000000-89ffffff
>  MEM window: ba000000-bbffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 8000-9fff
>  MEM window: b8000000-c7ffffff
>  PREFETCH window: 88000000-97ffffff
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1150098762.668:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>vesafb: framebuffer at 0xa0000000, mapped to 0xf8880000, using 3750k, total 7872k
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 50686 bytes,<6>...found (800x600, 28094 bytes, v3).
>Console: switching to colour frame buffer device 96x33
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 7, 524288 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>LID0 RP01 RP02 RP03 RP04 USB1 USB2 USB3 USB4 USB7 MODM PS2K 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 156k freed
>Write protecting the kernel read-only data: 281k
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 1.20 loaded.
>ahci 0000:00:1f.2: version 1.2
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>ahci: probe of 0000:00:1f.2 failed with error -12
>ata_piix 0000:00:1f.2: version 1.05
>ata_pci_init_one: pci_dev class+intf: 0x10180
>ata_pci_init_one: NO_LEGACY == 0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14
>ata1: dev 0 cfg 00:0040 49:2f00 82:746b 83:7d09 84:6023 85:7468 86:3c09 87:6023 88:203f 93:604b
>ata1: dev 0 ATA-6, max UDMA/100, 195371568 sectors: LBA48
>ata1(0): applying bridge limits
>ata_acpi_push_id: skipping for PATA mode
>ata1: dev 0 configured for UDMA/100
>pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
>pata_get_dev_handle: dev_handle: 0xdffe39e0, parent_handle: 0xdffe9480
>pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff6ea00, *handle=0xdffe39e0
>do_drive_get_GTF:   drive w/ adr=0: v: 0xdffe2700
>scsi0 : ata_piix
>  Vendor: ATA       Model: TOSHIBA MK1032GA  Rev: AB21
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 > sda4
>sd 0:0:0:0: Attached scsi disk sda
>pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
>pata_get_dev_handle: dev_handle: 0xdffe39e0, parent_handle: 0xdffe9480
>pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff6ea00, *handle=0xdffe39e0
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
>synaptics: Toshiba Satellite M45 detected, limiting rate to 40pps.
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ata2: dev 0 cfg 00:85c0 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 93:4000
>ata2: dev 0 ATAPI, max UDMA/33
>ata2(0): applying bridge limits
>ata_acpi_push_id: skipping for PATA mode
>ata2: dev 0 configured for UDMA/33
>pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
>pata_get_dev_handle: dev_handle: 0xdffe39e0, parent_handle: 0xdffe9480
>pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff6ea00, *handle=0xdffe39e0
>do_drive_get_GTF:   drive w/ adr=0: v: 0xdffe25c0
>scsi1 : ata_piix
>  Vendor: MATSHITA  Model: DVD-RAM UJ-831S   Rev: 1.40
>  Type:   CD-ROM                             ANSI SCSI revision: 05
> 1:0:0:0: Attached scsi generic sg1 type 5
>pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
>pata_get_dev_handle: dev_handle: 0xdffe39e0, parent_handle: 0xdffe9480
>pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff6ea00, *handle=0xdffe39e0
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [TZCR] (48 C)
>ACPI: Thermal Zone [TZCL] (31 C)
>ACPI: Fan [FAN1] (off)
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>Attempting manual resume
>ReiserFS: sda5: found reiserfs format "3.6" with standard journal
>ReiserFS: sda5: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda5: checking transaction log (sda5)
>ReiserFS: sda5: Using r5 hash to sort names
>ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>yenta_cardbus: probe of 0000:05:06.0 failed with error -12
>ieee80211_crypt: module not supported by Novell, setting U taint flag.
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: module not supported by Novell, setting U taint flag.
>ieee80211: 802.11 data/management/control stack, git-1.1.7
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: module not supported by Novell, setting U taint flag.
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.10
>ipw2200: Copyright(c) 2003-2005 Intel Corporation
>ACPI: PCI Interrupt 0000:05:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>ieee1394: Initialized config rom entry `ip1394'
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.16.13-4-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
>Linux agpgart interface v0.101 (c) Dave Jones
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.16.13-4-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001240
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.16.13-4-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001260
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.16.13-4-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new device found, idVendor=045e, idProduct=007d
>usb 1-1: new device strings: Mfr=1, Product=3, SerialNumber=0
>usb 1-1: Product: Microsoft 3-Button Mouse with IntelliEye?
>usb 1-1: Manufacturer: Microsoft
>usb 1-1: configuration #1 chosen from 1 choice
>ipw2200: Radio Frequency Kill Switch is On:
>Kill switch must be turned off for wireless networking to work.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>sky2 v0.15 addr 0xcc000000 irq 11 Yukon-FE (0xb7) rev 1
>sky2 eth1: addr 00:a0:d1:24:bc:c1
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6
>PCI: setting IRQ 6 as level-triggered
>ACPI: PCI Interrupt 0000:05:06.2[C] -> Link [LNKG] -> GSI 6 (level, low) -> IRQ 6
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[b8000000-b80007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>usbcore: registered new driver hiddev
>input: Microsoft Microsoft 3-Button Mouse with IntelliEye? as /class/input/input3
>input: USB HID v1.00 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye?] on usb-0000:00:1d.0-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>hw_random: cannot enable RNG, aborting
>intel8x0_measure_ac97_clock: measured 55515 usecs
>intel8x0: clocking to 48000
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.16.13-4-default ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xa0000000
>usb 1-1: USB disconnect, address 2
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00080da0d124bcc1]
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>dm-netlink version 0.0.2 loaded
>usb 1-1: new low speed USB device using uhci_hcd and address 3
>usb 1-1: new device found, idVendor=045e, idProduct=007d
>usb 1-1: new device strings: Mfr=1, Product=3, SerialNumber=0
>usb 1-1: Product: Microsoft 3-Button Mouse with IntelliEye?
>usb 1-1: Manufacturer: Microsoft
>usb 1-1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft 3-Button Mouse with IntelliEye? as /class/input/input4
>input: USB HID v1.00 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye?] on usb-0000:00:1d.0-1
>loop: loaded (max 8 devices)
>ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>ReiserFS: sda7: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda7: checking transaction log (sda7)
>ReiserFS: sda7: Using r5 hash to sort names
>NTFS driver 2.1.26 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
>NTFS-fs warning (device sda1): load_system_files(): Volume has unsupported flags set.  Will not be able to remount read-write.  Run chkdsk and mount in Windows.
>AppArmor: AppArmor (version 2.0-19.43r6320) initialized
>audit(1150098795.890:2): AppArmor (version 2.0-19.43r6320) initialized
>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8126 buckets, 65008 max) - 232 bytes per conntrack
>Adding 1574328k swap on /dev/sda6.  Priority:-1 extents:1 across:1574328k
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID0]
>ACPI: Power Button (CM) [PWRB]
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>IA-32 Microcode Update Driver v1.14 unregistered
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>powernow: This module only works with AMD K7 CPUs
>acpi-cpufreq: CPU0 - ACPI performance management activated.
>sky2 eth1: enabling interface
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 eth1: Link is up at 100 Mbps, full duplex, flow control none
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>NET: Registered protocol family 17
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized i915 1.4.0 20060119 on minor 0
>eth1: no IPv6 routers present
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.68 DST=224.0.0.251 LEN=78 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=58 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.68 DST=224.0.0.251 LEN=78 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=58 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.68 DST=224.0.0.251 LEN=78 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=58 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.68 DST=224.0.0.251 LEN=111 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=91 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.68 DST=224.0.0.251 LEN=111 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=91 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.68 DST=224.0.0.251 LEN=111 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=91 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.68 DST=224.0.0.251 LEN=111 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=91 
>eth1: no IPv6 routers present
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.68 DST=224.0.0.251 LEN=111 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=91 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.68 DST=224.0.0.251 LEN=111 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=91 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.68 DST=224.0.0.251 LEN=111 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=91 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=00:a0:d1:24:bc:c1:00:11:43:cf:16:5b:08:00 SRC=192.168.1.253 DST=192.168.1.68 LEN=48 TOS=0x00 PREC=0x00 TTL=128 ID=34459 DF PROTO=TCP SPT=4603 DPT=2967 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405B401010402) 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=00:a0:d1:24:bc:c1:00:11:43:cf:16:5b:08:00 SRC=192.168.1.253 DST=192.168.1.68 LEN=48 TOS=0x00 PREC=0x00 TTL=128 ID=34491 DF PROTO=TCP SPT=4603 DPT=2967 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405B401010402) 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=00:a0:d1:24:bc:c1:00:11:43:cf:16:5b:08:00 SRC=192.168.1.253 DST=192.168.1.68 LEN=48 TOS=0x00 PREC=0x00 TTL=128 ID=34604 DF PROTO=TCP SPT=4603 DPT=2967 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405B401010402)

Actions: View

Attachments on bug 182541: 88761 | 88762