Attachment 99158 Details for Bug 206916

dmesg.log after plug in usb stick

dmesg.log (text/plain), 27.50 KB, created by Pavel Nemec on 2006-09-20 07:57:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pavel Nemec

Created: 2006-09-20 07:57:56 UTC

Size: 27.50 KB

patch

obsolete

>Linux version 2.6.18-rc5-git6-2-default (geeko@buildhost) (gcc version 4.1.2 20060829 (prerelease) (SUSE Linux)) #1 SMP Fri Sep 1 22:19:04 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d4000 - 00000000000de000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
> BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fb990
>On node 0 totalpages: 262128
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32752 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>IO/L-APIC allowed because system is MP or new enough
>ACPI: RSDP (v000 AMI                                   ) @ 0x000fa9f0
>ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x3fff0000
>ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x3fff0030
>ACPI: MADT (v001 AMIINT VIA_K7   0x00000009 MSFT 0x00000097) @ 0x3fff00c0
>ACPI: DSDT (v001    VIA   VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:10 APIC version 16
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Detected 1926.728 MHz processor.
>Built 1 zonelists.  Total pages: 262128
>Kernel command line: root=/dev/sda6 vga=0x31a resume=/dev/sda5 splash=silent
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1032836k/1048512k available (1737k kernel code, 14984k reserved, 696k data, 196k init, 131008k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3856.70 BogoMIPS (lpj=7713414)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 16k freed
>checking if image is initramfs... it is
>Freeing initrd memory: 2598k freed
>ACPI: Core revision 20060707
> not found!
>CPU0: AMD Athlon(tm) XP 2600+ stepping 00
>Total of 1 processors activated (3856.70 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>migration_cost=0
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdb11, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Bridge: 0000:00:01.0
>  IO window: a000-afff
>  MEM window: dfe00000-dfefffff
>  PREFETCH window: 9fd00000-dfcfffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Machine check exception polling timer started.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1158583513.648:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Bypassing VIA 8237 APIC De-Assert Message
>vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 10240k, total 131072k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=50
>vesafb: protected mode interface info at c000:57cf
>vesafb: pmi: set display start = c00c5863, set palette = c00c58af
>vesafb: pmi: ports = a810 a816 a854 a838 a83c a85c a800 a804 a8b0 a8b2 a8b4 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 76041 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
>PNP: PS/2 controller doesn't have KBD irq; using default 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>logips2pp: Detected unknown logitech mouse model 1
>input: PS/2 Logitech Mouse as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 196k freed
>Time: tsc clocksource has been installed.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_via 0000:00:0f.0: version 2.0
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
>sata_via 0000:00:0f.0: routed to hard irq line 10
>ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169
>ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169
>scsi0 : sata_via
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-6, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : sata_via
>ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xE407
>  Vendor: ATA       Model: ST3160827AS       Rev: 3.42
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: Attached scsi disk sda
>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
>PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 9
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: SAMSUNG CDRW/DVD SM-352F, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
>PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 1
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 177, io base 0x0000b800
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.18-rc5-git6-2-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:10.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
>PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 1
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 177, io base 0x0000bc00
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.18-rc5-git6-2-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:10.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>Linux agpgart interface v0.101 (c) Dave Jones
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
>PCI: VIA IRQ fixup for 0000:00:10.4, from 5 to 1
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:10.4: irq 177, io mem 0xdfffb900
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: EHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.18-rc5-git6-2-default ehci_hcd
>usb usb3: SerialNumber: 0000:00:10.4
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>ieee1394: Initialized config rom entry `ip1394'
>hda: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
>fglrx: module not supported by Novell, setting U taint flag.
>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>[fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
>[fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0
>8139too Fast Ethernet driver 0.9.27
>ALSA sound/pci/via82xx.c:1908: Using DXS as PCM Playback
>ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
>PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 1
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 177, io base 0x0000c000
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.18-rc5-git6-2-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:10.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
>PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 1
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:10.3: irq 177, io base 0x0000c400
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.18-rc5-git6-2-default uhci_hcd
>usb usb5: SerialNumber: 0000:00:10.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 193
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[193]  MMIO=[dfffb000-dfffb7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>agpgart: Detected VIA KT400/KT400A/KT600 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 193
>tulip0:  EEPROM default media type Autosense.
>tulip0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
>tulip0:  MII transceiver #5 config 1000 status 7809 advertising 01e1.
>eth0: Digital DS21143 Tulip rev 65 at 0001d400, 00:00:1C:B5:A8:6B, IRQ 193.
>tg3.c:v3.65 (August 07, 2006)
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18 (level, low) -> IRQ 201
>eth1: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:09:82:05:77
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] 
>eth1: dma_rwctrl[763f0000] dma_mask[32-bit]
>ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 201
>eth2: RealTek RTL8139 at 0xf8828b00, 00:0e:2e:58:c6:e2, IRQ 201
>eth2:  Identified 8139 chip type 'RTL-8100B/8139D'
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 19 (level, low) -> IRQ 209
>usb 2-2: new device found, idVendor=045e, idProduct=00dd
>usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: Comfort Curve Keyboard 2000
>usb 2-2: Manufacturer: Microsoft
>usb 2-2: configuration #1 chosen from 1 choice
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>eth1 renamed to ethxx1
>eth2 renamed to eth1
>usb 4-2: new low speed USB device using uhci_hcd and address 2
>usb 4-2: new device found, idVendor=046d, idProduct=c00e
>usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: USB-PS/2 Optical Mouse
>usb 4-2: Manufacturer: Logitech
>usb 4-2: configuration #1 chosen from 1 choice
>ethxx1 renamed to eth2
>usbcore: registered new driver hiddev
>input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input2
>input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:10.1-2
>input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input3
>input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:10.1-2
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.2-2
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc0000766d37]
>Adding 2104472k swap on /dev/sda5.  Priority:-1 extents:1 across:2104472k
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>loop: loaded (max 8 devices)
>ReiserFS: sda2: found reiserfs format "3.6" with standard journal
>ReiserFS: sda2: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda2: checking transaction log (sda2)
>ReiserFS: sda2: replayed 30 transactions in 10 seconds
>ReiserFS: sda2: Using r5 hash to sort names
>ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>ReiserFS: sda7: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda7: checking transaction log (sda7)
>ReiserFS: sda7: replayed 5 transactions in 0 seconds
>ReiserFS: sda7: Using r5 hash to sort names
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>AppArmor: AppArmor (version 2.0-19.43r6320) initialized
>audit(1158583547.662:2): AppArmor (version 2.0-19.43r6320) initialized
>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8191 buckets, 65528 max) - 228 bytes per conntrack
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>eth1: link down
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>PM: Writing back config space on device 0000:00:0b.0 at offset b (was 3ed173b, writing 590c1462)
>PM: Writing back config space on device 0000:00:0b.0 at offset 3 (was 0, writing 2008)
>PM: Writing back config space on device 0000:00:0b.0 at offset 2 (was 2000000, writing 2000003)
>PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 2b00000, writing 2b00006)
>PM: Writing back config space on device 0000:00:0b.0 at offset 0 (was 3ed173b, writing 169c14e4)
>ADDRCONF(NETDEV_UP): eth2: link is not ready
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 217
>[fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
>[fglrx] AGP detected, AgpState   = 0x1f000a1b (hardware caps of chipset)
>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>[fglrx] AGP enabled,  AgpCommand = 0x1f000312 (selected caps)
>[fglrx] total      GART = 134217728
>[fglrx] free       GART = 118222848
>[fglrx] max single GART = 118222848
>[fglrx] total      LFB  = 126873600
>[fglrx] free       LFB  = 116387840
>[fglrx] max single LFB  = 116387840
>[fglrx] total      Inv  = 0
>[fglrx] free       Inv  = 0
>[fglrx] max single Inv  = 0
>[fglrx] total      TIM  = 0
>tg3: eth2: Link is up at 1000 Mbps, full duplex.
>tg3: eth2: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
>NET: Registered protocol family 17
>eth0: no IPv6 routers present
>audit(1158583575.987:3): audit_pid=4559 old=0 by auid=4294967295
>eth2: no IPv6 routers present
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>powernow-k8: Processor cpuid 6a0 not supported
>[fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
>[fglrx] AGP detected, AgpState   = 0x1f000a1b (hardware caps of chipset)
>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>[fglrx] AGP enabled,  AgpCommand = 0x1f000312 (selected caps)
>[fglrx] total      GART = 134217728
>[fglrx] free       GART = 118222848
>[fglrx] max single GART = 118222848
>[fglrx] total      LFB  = 126873600
>[fglrx] free       LFB  = 116387840
>[fglrx] max single LFB  = 116387840
>[fglrx] total      Inv  = 0
>[fglrx] free       Inv  = 0
>[fglrx] max single Inv  = 0
>[fglrx] total      TIM  = 0
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=130.57.4.16 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12127 DF PROTO=TCP SPT=20883 DPT=443 WINDOW=1689 RES=0x00 ACK URGP=0 
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=130.57.4.16 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=45000 DF PROTO=TCP SPT=20884 DPT=443 WINDOW=1211 RES=0x00 ACK URGP=0 
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=130.57.4.16 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=23464 DF PROTO=TCP SPT=10143 DPT=443 WINDOW=2276 RES=0x00 ACK URGP=0 
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=130.57.4.16 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=23465 DF PROTO=TCP SPT=10143 DPT=443 WINDOW=2276 RES=0x00 ACK URGP=0 
>NET: Registered protocol family 4
>ax25: module not supported by Novell, setting U taint flag.
>NET: Registered protocol family 3
>NET: Registered protocol family 5
>st: Version 20050830, fixed bufsize 32768, s/g segs 256
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=10.20.0.2 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=13324 DF PROTO=TCP SPT=12349 DPT=389 WINDOW=329 RES=0x00 ACK FIN URGP=0 OPT (0101080A0103F55C323C2065) 
>BUG: warning at fs/inotify.c:171/set_dentry_child_flags()
> [<c0105438>] show_trace_log_lvl+0x5b/0x16d
> [<c0105ad5>] show_trace+0xf/0x11
> [<c0105bd8>] dump_stack+0x15/0x17
> [<c018813e>] set_dentry_child_flags+0x5e/0x11e
> [<c0188251>] remove_watch_no_event+0x53/0x5f
> [<c018833f>] inotify_remove_watch_locked+0x12/0x3e
> [<c018860a>] inotify_rm_wd+0x6d/0x8a
> [<c0188ad5>] sys_inotify_rm_watch+0x38/0x4f
> [<c0103d5d>] sysenter_past_esp+0x56/0x79
>DWARF2 unwinder stuck at sysenter_past_esp+0x56/0x79
>Leftover inexact backtrace:
>BUG: warning at fs/inotify.c:171/set_dentry_child_flags()
> [<c0105438>] show_trace_log_lvl+0x5b/0x16d
> [<c0105ad5>] show_trace+0xf/0x11
> [<c0105bd8>] dump_stack+0x15/0x17
> [<c018813e>] set_dentry_child_flags+0x5e/0x11e
> [<c01886e0>] inotify_add_watch+0xb1/0xf8
> [<c0189116>] sys_inotify_add_watch+0x104/0x13e
> [<c0103d5d>] sysenter_past_esp+0x56/0x79
>DWARF2 unwinder stuck at sysenter_past_esp+0x56/0x79
>Leftover inexact backtrace:
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=10.10.0.93 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10835 DF PROTO=TCP SPT=6385 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A0137AB896B5CB3F1) 
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=119 DF PROTO=TCP SPT=29063 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A014148DD6BDED983) 
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=195.135.221.134 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=57944 DF PROTO=TCP SPT=26593 DPT=80 WINDOW=69 RES=0x00 ACK RST URGP=0 OPT (0101080A014148DD6BDED9D4) 
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=195.135.221.136 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52797 DF PROTO=TCP SPT=28768 DPT=80 WINDOW=56 RES=0x00 ACK RST URGP=0 OPT (0101080A014148DD6BDED9F8) 
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=195.135.221.136 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=36639 DF PROTO=TCP SPT=28769 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A014148DD6BDEDABF) 
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=55080 DF PROTO=TCP SPT=29067 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A014148DD6BDEDAD4) 
>BUG: warning at fs/inotify.c:171/set_dentry_child_flags()
> [<c0105438>] show_trace_log_lvl+0x5b/0x16d
> [<c0105ad5>] show_trace+0xf/0x11
> [<c0105bd8>] dump_stack+0x15/0x17
> [<c018813e>] set_dentry_child_flags+0x5e/0x11e
> [<c0188251>] remove_watch_no_event+0x53/0x5f
> [<c018833f>] inotify_remove_watch_locked+0x12/0x3e
> [<c018860a>] inotify_rm_wd+0x6d/0x8a
> [<c0188ad5>] sys_inotify_rm_watch+0x38/0x4f
> [<c0103d5d>] sysenter_past_esp+0x56/0x79
>DWARF2 unwinder stuck at sysenter_past_esp+0x56/0x79
>Leftover inexact backtrace:
>BUG: warning at fs/inotify.c:171/set_dentry_child_flags()
> [<c0105438>] show_trace_log_lvl+0x5b/0x16d
> [<c0105ad5>] show_trace+0xf/0x11
> [<c0105bd8>] dump_stack+0x15/0x17
> [<c018813e>] set_dentry_child_flags+0x5e/0x11e
> [<c01886e0>] inotify_add_watch+0xb1/0xf8
> [<c0189116>] sys_inotify_add_watch+0x104/0x13e
> [<c0103d5d>] sysenter_past_esp+0x56/0x79
>DWARF2 unwinder stuck at sysenter_past_esp+0x56/0x79
>Leftover inexact backtrace:
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=10.20.0.2 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3270 DF PROTO=TCP SPT=9987 DPT=389 WINDOW=306 RES=0x00 ACK FIN URGP=0 OPT (0101080A015AEDA6323C2065) 
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=10.20.0.1 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=20316 DPT=3128 WINDOW=0 RES=0x00 RST URGP=0 
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=10.20.0.1 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=26737 DPT=3128 WINDOW=0 RES=0x00 RST URGP=0 
>SFW2-OUT-ERROR IN= OUT=eth2 SRC=10.20.1.140 DST=10.20.0.1 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=15979 DPT=3128 WINDOW=0 RES=0x00 RST URGP=0 
>usb 3-1: new high speed USB device using ehci_hcd and address 4
>usb 3-1: new device found, idVendor=0ea0, idProduct=2168
>usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: Flash Disk      
>usb 3-1: Manufacturer: USB     
>usb 3-1: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>ub: module not supported by Novell, setting U taint flag.
>usbcore: registered new driver ub
>  Vendor: USB       Model: BAR               Rev: 2.00
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>usb 3-1: reset high speed USB device using ehci_hcd and address 4
>SCSI device sdb: 511744 512-byte hdwr sectors (262 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 03 00 00 00
>sdb: assuming drive cache: write through
>SCSI device sdb: 511744 512-byte hdwr sectors (262 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 03 00 00 00
>sdb: assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: Attached scsi removable disk sdb
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>usb-storage: device scan complete
>usb 3-1: reset high speed USB device using ehci_hcd and address 4
>usb 3-1: reset high speed USB device using ehci_hcd and address 4
>usb 3-1: reset high speed USB device using ehci_hcd and address 4

Actions: View

Attachments on bug 206916: 99158 | 99159