Bug 373128

Summary:	usb devices are not recognized
Product:	[openSUSE] openSUSE 11.0	Reporter:	Massimiliano Marsiglietti <maxmars>
Component:	Hotplug	Assignee:	Oliver Neukum <oneukum>
Status:	RESOLVED INVALID	QA Contact:	E-mail List <qa-bugs>
Severity:	Critical
Priority:	P5 - None	CC:	farcusnz, guitarist198, n1ho
Version:	Alpha 3	Flags:	coolo: SHIP_STOPPER-
Target Milestone:	---
Hardware:	x86-64
OS:	openSUSE 11.0
Whiteboard:
Found By:	Beta-Customer	Services Priority:
Business Priority:		Blocker:	---
Marketing QA Status:	---	IT Deployment:	---
Attachments:	yast hardware information dmesg - 1st boot dmesg - 2nd boot - only 1 mem inserted dmesg - 2nd boot - both mem inserted

Description Massimiliano Marsiglietti 2008-03-22 14:40:01 UTC

I try plugging in different usb memory devices that worked flawlessly with previous opensuse versions but they are not automatically recognized by the system.

KDE does not advertise them and they do not show up as /dev/sdX either.

Comment 1 Josh J 2008-03-22 15:24:05 UTC

I have had no problem with this with my installation on VirtualBox.  Do you have the device notifier plasmoid open?  Also, after you plug a memory device in, check dmesg to see if it was found.

Comment 2 Massimiliano Marsiglietti 2008-03-22 18:49:11 UTC

I have the device notifier plasmoid open. It works because it shows CDs and DVDs as I put them in.

dmesg does not seem to "feel" the memory device, either, because no messages are shown.

Comment 3 Josh J 2008-03-22 19:44:38 UTC

Maybe you could check the output of lsmod to see if you have a USB driver loaded. Alternatively you can use YaST->Hardware->Hardware Information to check. 

Also you could use rpm -qa | grep usb to see if you have libusb installed.

Comment 4 Massimiliano Marsiglietti 2008-03-22 20:08:24 UTC

Created attachment 203488 [details]
yast hardware information

Here's information from yast about all of my hardware.

Comment 5 Massimiliano Marsiglietti 2008-03-22 20:10:57 UTC

rpm:

maxmars@marspc:~> rpm -qa | grep -i usb
libusb-0.1.12-96
usbutils-0.72-89
libusb-32bit-0.1.12-96

lsmod:

Module                  Size  Used by
ip6t_LOG               23940  7 
nf_conntrack_ipv6      36040  3 
xt_pkttype             18944  3 
ipt_LOG                23428  8 
xt_limit               20356  15 
binfmt_misc            30220  1 
snd_pcm_oss            68992  0 
snd_mixer_oss          35456  1 snd_pcm_oss
snd_seq                83600  0 
snd_seq_device         26516  1 snd_seq
ip6t_REJECT            22272  3 
xt_tcpudp              20480  2 
ipt_REJECT             21120  3 
xt_state               19712  6 
iptable_mangle         20608  0 
iptable_nat            24976  0 
nf_nat                 39448  1 iptable_nat
iptable_filter         20736  1 
ip6table_mangle        20480  0 
nf_conntrack_ipv4      29576  5 iptable_nat
nf_conntrack           91536  5 nf_conntrack_ipv6,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
ip_tables              39056  3 iptable_mangle,iptable_nat,iptable_filter
ip6table_filter        20608  1 
ip6_tables             40720  3 ip6t_LOG,ip6table_mangle,ip6table_filter
x_tables               43144  11 ip6t_LOG,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,xt_tcpudp,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables
ipv6                  331528  21 nf_conntrack_ipv6,ip6t_REJECT,ip6table_mangle
cpufreq_conservative    26248  0 
cpufreq_userspace      23556  0 
cpufreq_powersave      18816  0 
powernow_k8            32772  0 
fuse                   72128  1 
loop                   37508  0 
dm_mod                 88600  0 
tda1004x               33668  1 
saa7134_dvb            34444  0 
videobuf_dvb           24196  1 saa7134_dvb
dvb_core              108196  1 videobuf_dvb
tuner                  56420  0 
tea5767                23684  1 tuner
tda8290                31492  1 tuner
tda18271               49544  1 tda8290
tda827x                28036  2 tda8290
tuner_xc2028           36496  1 tuner
xc5000                 28292  1 tuner
firmware_class         27776  4 tda1004x,saa7134_dvb,tuner_xc2028,xc5000
tda9887                27140  1 tuner
tuner_simple           25224  1 tuner
mt20xx                 29320  1 tuner
tea5761                22276  1 tuner
saa7134               175452  1 saa7134_dvb
compat_ioctl32         25984  1 saa7134
videodev               52096  3 tuner,saa7134,compat_ioctl32
v4l1_compat            29188  1 videodev
v4l2_common            29824  2 tuner,saa7134
videobuf_dma_sg        32644  3 saa7134_dvb,videobuf_dvb,saa7134
videobuf_core          38276  3 videobuf_dvb,saa7134,videobuf_dma_sg
ir_kbd_i2c             28048  1 saa7134
ir_common              57476  2 saa7134,ir_kbd_i2c
tveeprom               34704  1 saa7134
rtc_cmos               28728  0 
rtc_core               41012  1 rtc_cmos
parport_pc             59464  0 
rtc_lib                20224  1 rtc_core
parport                60448  1 parport_pc
floppy                 83224  0 
k8temp                 23040  0 
hwmon                  20408  1 k8temp
shpchp                 53660  0 
pci_hotplug            49720  1 shpchp
sr_mod                 35636  0 
cdrom                  53416  1 sr_mod
snd_intel8x0           56488  2 
snd_ac97_codec        142920  1 snd_intel8x0
ac97_bus               19072  1 snd_ac97_codec
snd_pcm               115080  3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer              45072  2 snd_seq,snd_pcm
snd                    93048  12 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
i2c_nforce2            24192  0 
button                 27040  0 
soundcore              26000  1 snd
snd_page_alloc         28688  2 snd_intel8x0,snd_pcm
i2c_core               45344  18 tda1004x,saa7134_dvb,tuner,tea5767,tda8290,tda18271,tda827x,tuner_xc2028,xc5000,tda9887,tuner_simple,mt20xx,tea5761,saa7134,v4l2_common,ir_kbd_i2c,tveeprom,i2c_nforce2
forcedeth              72076  0 
sg                     56784  0 
sd_mod                 47280  5 
ehci_hcd               55948  0 
ohci_hcd               42372  0 
usbcore               188120  3 ehci_hcd,ohci_hcd
edd                    28176  0 
ext3                  170512  3 
mbcache                27396  1 ext3
jbd                    82240  1 ext3
fan                    23944  0 
pata_amd               33284  0 
sata_nv                46860  4 
libata                192288  2 pata_amd,sata_nv
scsi_mod              195032  4 sr_mod,sg,sd_mod,libata
thermal                43168  0 
processor              73948  2 powernow_k8,thermal

Thanks for looking into this.

Comment 6 Josh J 2008-03-22 20:59:07 UTC

In looking at your YaST hardware information, I noticed you are using the Linux 2.6.25-rc5-git3-6-default kernel.  In your bootloader, are you offered to boot from a different kernel?  I have 2 entries to choose from:
Linux 2.6.25-rc5-git3-6-default and OpenSUSE 11.

When using the Linux 2.6.25-rc5-git3-6-default entry, my usb devices do not automount (or at least that I know of).

dmesg does detect it though:
usb 1-1: New high speed USB device ehci_hcd and address 3

I do not know what to do with it at this point.  USB may be handled different because I believe USB drivers are going to be GPL-only in 2.6.25.

So if you have another entry in your bootloader, boot that one and see if USB detection works then.

Thanks

Comment 7 Massimiliano Marsiglietti 2008-03-22 21:45:18 UTC

The one you're looking at is already the default kernel (opensuse11), although the string reported there may seem different I positively booted the kernel labeled as opensuse11..

I have tried booting all four entries that the installer put there, for god measure, and the outcome is always the same.

I think it's not acceptable that USB is rendered non functional, on a chipset (nforce3) that's hardly exotic and that otherwise works flawlessly.

At least please offer a manual workaround to mount usb devices, or this is probably going to upset quite a few people.

Comment 8 Massimiliano Marsiglietti 2008-03-22 22:47:40 UTC

As a followup to my last message, I've got a few more things to report:

a) I am connecting not directly to my usb port but to a powered usb hub (still, it worked flawlessly ever before).

b) usb hotplug actually works if I put something in the hub (e.g. a memory card) before turning on the pc.
The memory card I put there before turning on the pc is not recognized automatically as a new device, but when I connect other devices they do show up on the new devices plasmoid.
Still, I can manually mount the memory card I put in the the hub so although this is far from ideal, at least I do have a workaround of some kind.

c) the window opened by the plasmoid when I try to open the newly plugged device crashes. I need to go to /media/mydevice to open the device.

Comment 9 Cyril Hrubis 2008-04-04 17:37:36 UTC

Please attach output from dmesg after booting with connected usb storage device and after booting without usb device and later connected it.

Comment 10 Massimiliano Marsiglietti 2008-04-05 14:51:21 UTC

Created attachment 206385 [details]
dmesg - 1st boot

this is the output I get if I boot without the memory attached.

Comment 11 Massimiliano Marsiglietti 2008-04-05 14:52:58 UTC

Created attachment 206386 [details]
dmesg - 2nd boot - only 1 mem inserted

This is what I get after the boot with one memory inserted (before I insert the 2nd memory)

Comment 12 Massimiliano Marsiglietti 2008-04-05 14:53:57 UTC

Created attachment 206387 [details]
dmesg - 2nd boot - both mem inserted

This is the output I get if I boot with a mem inserted and then insert a 2nd memory.

Comment 13 Massimiliano Marsiglietti 2008-04-05 14:54:23 UTC

I have attached the requested information.

Comment 14 Greg Kroah-Hartman 2008-05-07 20:33:58 UTC

This looks like a messed up hardware device.  Do other USB storage devices work properly on this machine?  Does this stick work on other Linux machines properly, or any other box?

Comment 15 Massimiliano Marsiglietti 2008-05-07 21:40:38 UTC

The problem is independent of the stick -- I have used four different ones (one is actually an external drive) and the result is the same.

The same sticks work well with OpenSUSE 10.3 and Windows XP.

Also, I have tested this with two different PCs on which i installed the Opensuse11 betas and the problem is the same. Both PCs have an ASUS main board, but one has an NForce 2 chipset and the other has a VIA chipset.

Comment 16 Massimiliano Marsiglietti 2008-05-08 20:10:31 UTC

Sorry forgot to remove "NEEDINFO".

Comment 17 Bayard Coolidge 2008-05-09 15:34:29 UTC

I'm seeing a similar problem - when I (finally) boot the Beta2 installation DVD to try to resurrect the Beta2 system it (mostly) installed on /dev/sdc7 (and won't boot due to GRUB issues discussed elsewhere), I tried to do a 'repair'. The overall result of that was that it claimed that NONE of the putative ext3 partitions on my (Western Digital 250MB MyBook) USB drive were valid! However, they appear to be valid to Fedora 8 and Fedora 9 AND they did appear to be valid to the SUSE 11.0 Alpha 3 installation that I had on /dev/sdc7 before (and overwrote, not upgraded, with Beta2).

I'm using an HP dv9000z (AMD, 2GHz TurionX2, 2GB memory,dual internal SATA drives,
NVIDIA GeForce Go 6150, and the system board was recently replaced due to the
infamous wireless/display problems). I boot with 'noapic' and with
'brokenmodules=ieee1394,ssb'.

The usb sizing takes an inordinate amount of time (ca. 4-5 minutes), ieee1394
will hang if not excluded (or I briefly unplug the USB plug! - I have no firewire
devices), and the 'ssb' driver for the Broadcom BCM94311MCG (Dell 1390) miniPCI
card hangs in the 'loading' state. (BTW, the Broadcom does work beautifully
with the b43 driver in Fedora 9, and with the ndiswrapper stuff in openSuSE 10.2).

Comment 18 Oliver Neukum 2008-05-16 14:06:07 UTC

The attachments of #11 and #12 both show the kernel recognising storage devices.

Comment 19 Oliver Neukum 2008-05-16 14:08:00 UTC

Please provide:

1. the output of "dmesg -c" before you plug in the storage device
2. the output of "cat /proc/partitions" before you plug in the storage device
3. the output of "dmesg -c" after you plug in the storage device
4. the output of "cat /proc/partitions" after you plug in the storage device

Comment 20 Massimiliano Marsiglietti 2008-05-16 18:44:42 UTC

Here comes the output of FOUR different tests.

Test #1: boot with a usb device in the usb hub.
Test #2: boot with a usb device in the usb hub, a second device is added after boot.

Test #3: boot without a usb device in the usb hub. A device is added after boot.
Test #4: boot without a usb device in the usb hub. A device is added after boot. A second device is added (after boot as well).

Test #1:
dmesg -c: file is zero bytes (!)
cat /proc/partitions:

major minor  #blocks  name

   8     0   80043264 sda
   8     1     208813 sda1
   8     2          1 sda2
   8     5    2104483 sda5
   8     6   77722438 sda6
   8    16    1966080 sdb
   8    17    1965952 sdb1

Test #2:

dmesg -c:

usb 2-4.2: new high speed USB device using ehci_hcd and address 4
usb 2-4.2: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb 2-4.2: New USB device found, idVendor=05e3, idProduct=0715
usb 2-4.2: New USB device strings: Mfr=3, Product=4, SerialNumber=2
usb 2-4.2: Product: USB Reader
usb 2-4.2: Manufacturer: Genesys 
usb 2-4.2: SerialNumber: 000000009407
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
scsi 3:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9407 PQ: 0 ANSI: 0
sd 3:0:0:0: [sdc] 3970048 512-byte hardware sectors (2033 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sd 3:0:0:0: [sdc] 3970048 512-byte hardware sectors (2033 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI removable disk
sd 3:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete

cat /proc/partitions:

major minor  #blocks  name

   8     0   80043264 sda
   8     1     208813 sda1
   8     2          1 sda2
   8     5    2104483 sda5
   8     6   77722438 sda6
   8    16    1966080 sdb
   8    17    1965952 sdb1
   8    32    1985024 sdc
   8    33    1983619 sdc1

Test #3:

dmesg -c:

Linux version 2.6.25.3-2-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-05-10 07:46:36 +0200
Command line: root=/dev/disk/by-id/scsi-SATA_Maxtor_6L080L0_L25P232G-part6 resume=/dev/sda5 splash=silent vga=0x317
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
 BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
 BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
 BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 245680) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000FAC60, 0024 (r2 ACPIAM)
ACPI: XSDT 3BFB0100, 003C (r1 A M I  OEMXSDT  10000505 MSFT       97)
ACPI: FACP 3BFB0290, 00F4 (r3 A M I  OEMFACP  10000505 MSFT       97)
ACPI: DSDT 3BFB03F0, 46B2 (r1  A0347 A0347001        1 INTL  2002026)
ACPI: FACS 3BFBE000, 0040
ACPI: APIC 3BFB0390, 005C (r1 A M I  OEMAPIC  10000505 MSFT       97)
ACPI: OEMB 3BFBE040, 0046 (r1 A M I  AMI_OEM  10000505 MSFT       97)
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000003bfb0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 245680) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000003bfb0000
  NODE_DATA [000000000000b000 - 0000000000012fff]
  bootmap [0000000000013000 -  000000000001a7f7] pages 8
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-8b8bd7] TEXT DATA BSS
early res: 3 [37b1d000-37fef825] RAMDISK
early res: 4 [9fc00-a0bff] EBDA
early res: 5 [8000-afff] PGTABLE
 [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   245680
On node 0 totalpages: 245583
  DMA zone: 56 pages used for memmap
  DMA zone: 1729 pages reserved
  DMA zone: 2214 pages, LIFO batch:0
  DMA32 zone: 3302 pages used for memmap
  DMA32 zone: 238282 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 3c000000:a4000000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PERCPU: Allocating 50608 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 240496
Policy zone: DMA32
Kernel command line: root=/dev/disk/by-id/scsi-SATA_Maxtor_6L080L0_L25P232G-part6 resume=/dev/sda5 splash=silent vga=0x317
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
time.c: Detected 2000.072 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @ dc000000 size 64 MB
Memory: 955884k/982720k available (2368k kernel code, 26448k reserved, 1930k data, 404k init)
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 4002.83 BogoMIPS (lpj=8005679)
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
ACPI: Core revision 20070126
nssearch-0336 [00] ns_search_and_enter   : Found bad character(s) in name, repaired: [PS*C]
nssearch-0336 [00] ns_search_and_enter   : Found bad character(s) in name, repaired: [PS*C]
Parsing all Control Methods:
Table [DSDT](id 0001) - 715 Objects with 69 Devices 204 Methods 29 Regions
 tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
Using local APIC timer interrupts.
APIC timer calibration result 12500459
Detected 12.500 MHz APIC timer.
Brought up 1 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,00000001
  groups: 00000000,00000000,00000000,00000001
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:.............................................................................................................................
Initialized 24/29 Regions 32/32 Fields 33/33 Buffers 36/38 Packages (724 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:
Executed 0 _INI methods requiring 0 _STA executions (examined 73 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  18, should be 13 [20070126]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 64M @ 0xdc000000
AppArmor: AppArmor Filesystem Enabled 
ACPI: RTC can wake from S4
system 00:06: ioport range 0x290-0x297 has been reserved
system 00:07: ioport range 0x3e0-0x3e7 has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x400-0x41f has been reserved
system 00:07: iomem range 0xff780000-0xffffffff could not be reserved
system 00:07: iomem range 0xf0000000-0xf7ffffff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0x0-0x0 could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved
system 00:0d: iomem range 0x0-0x0 could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: 0xfca00000-0xfeafffff
  PREFETCH window: 0x00000000cff00000-0x00000000d7efffff
PCI: Bridge: 0000:02:00.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.1
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:02:00.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 4938k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1210970233.408:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:02:00.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:00.0:pcie00]
PCI: Setting latency timer of device 0000:02:00.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:00.1:pcie00]
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000500000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 166113 bytes
bootsplash: ...found (1024x768, 197662 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
registered taskstats version 1
Freeing unused kernel memory: 404k freed
Write protecting the kernel read-only data: 1688k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Switched to high resolution mode on CPU 0
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU1] (supports 16 throttling states)
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
pata_via 0000:00:0f.0: version 0.3.3
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata1.00: ATA-7: Maxtor 6L080L0, BAJ41G20, max UDMA/133
ata1.00: 160086528 sectors, multi 16: LBA 
ata1.00: configured for UDMA/133
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L080L0   BAJ4 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<6>usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
 sda1 sda2 <<6>usbcore: registered new device driver usb
 sda5<6>USB Universal Host Controller Interface driver v3.0
 sda6 >
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
sd 0:0:0:0: [sda] Attached SCSI disk
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 20, io base 0x0000ec00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.3-2-default uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 22, io mem 0xfebff800
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.3-2-default ehci_hcd
usb usb2: SerialNumber: 0000:00:10.4
ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e880
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.3-2-default uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
usb 2-4: new high speed USB device using ehci_hcd and address 2
usb 2-4: configuration #1 chosen from 1 choice
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4: New USB device found, idVendor=04b4, idProduct=6560
usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
PM: Starting manual resume from disk
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button (CM) [PWRB]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x1e000, 00:15:f2:30:6d:09, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 0021.
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.5 to 64
ppdev: user-space parallel port driver
Adding 2104472k swap on /dev/sda5.  Priority:-1 extents:1 across:2104472k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
type=1505 audit(1210963044.031:2): operation="profile_load" name="/bin/ping" name2="default" pid=1190
type=1505 audit(1210963044.107:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1191
type=1505 audit(1210963044.155:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1192
type=1505 audit(1210963044.219:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1194
type=1505 audit(1210963044.303:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1200
fuse init (API version 7.9)
type=1505 audit(1210963044.423:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1211
type=1505 audit(1210963044.527:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1219
type=1505 audit(1210963044.663:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1229
type=1505 audit(1210963044.755:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1231
type=1505 audit(1210963044.807:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1237
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8
powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
Marking TSC unstable due to cpufreq changes
Clocksource tsc unstable (delta = -199693175 ns)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (7680 buckets, 30720 max)
mtrr: type mismatch for 3c000000,4000000 old: write-back new: write-combining
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized via 2.11.1 20070202 on minor 0
mtrr: type mismatch for 3c000000,4000000 old: write-back new: write-combining
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 2265, comm: ifup-wireless Tainted: G        N 2.6.25.3-2-default #1

Call Trace:
 [<ffffffff8020d686>] dump_trace+0xc4/0x576
 [<ffffffff8020db78>] show_trace+0x40/0x57
 [<ffffffff80450415>] _etext+0x72/0x7b
 [<ffffffff8027046b>] __report_bad_irq+0x38/0x87
 [<ffffffff802706a6>] note_interrupt+0x1ec/0x252
 [<ffffffff80270db5>] handle_fasteoi_irq+0xab/0xd0
 [<ffffffff8020ebb7>] do_IRQ+0x6e/0xd8
 [<ffffffff8020c59d>] ret_from_intr+0x0/0x19
 [<00007fcd657b007e>]

handlers:
[<ffffffff8844a709>] (via_driver_irq_handler+0x0/0x183 [via])
Disabling IRQ #16
eth0: link up, 10Mbps, half-duplex, lpa 0x0021
bootsplash: status on console 0 changed to on
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
eth0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 

cat /proc/partitions:

major minor  #blocks  name

   8     0   80043264 sda
   8     1     208813 sda1
   8     2          1 sda2
   8     5    2104483 sda5
   8     6   77722438 sda6

Test #4:

dmesg -c: file size is zero bytes (again)

cat /proc/partitions:

major minor  #blocks  name

   8     0   80043264 sda
   8     1     208813 sda1
   8     2          1 sda2
   8     5    2104483 sda5
   8     6   77722438 sda6

(same as test #3)

Hope this helps.

Comment 21 Oliver Neukum 2008-05-17 07:28:40 UTC

Well, that wasn't exactly the requested test, but it showed something:

Pid: 2265, comm: ifup-wireless Tainted: G        N 2.6.25.3-2-default #1

Call Trace:
 [<ffffffff8020d686>] dump_trace+0xc4/0x576
 [<ffffffff8020db78>] show_trace+0x40/0x57
 [<ffffffff80450415>] _etext+0x72/0x7b
 [<ffffffff8027046b>] __report_bad_irq+0x38/0x87
 [<ffffffff802706a6>] note_interrupt+0x1ec/0x252
 [<ffffffff80270db5>] handle_fasteoi_irq+0xab/0xd0
 [<ffffffff8020ebb7>] do_IRQ+0x6e/0xd8
 [<ffffffff8020c59d>] ret_from_intr+0x0/0x19
 [<00007fcd657b007e>]

handlers:
[<ffffffff8844a709>] (via_driver_irq_handler+0x0/0x183 [via])
Disabling IRQ #16

Please provide the output of "cat /proc/interrupts"

Comment 22 Massimiliano Marsiglietti 2008-05-17 20:08:26 UTC

To my knowledge I did all the requested tests, and then some. If I didn't do the right tests please tell me what I should do and I will gladly comply -- as for now, here's the output for: 

"cat /proc/interrupts"

           CPU0
  0:         36   IO-APIC-edge      timer
  1:        654   IO-APIC-edge      i8042
  4:          6   IO-APIC-edge
  7:     339542   IO-APIC-edge      parport0
  8:          0   IO-APIC-edge      rtc0
  9:          0   IO-APIC-fasteoi   acpi
 12:      91280   IO-APIC-edge      i8042
 14:      38420   IO-APIC-edge      pata_via
 15:      48025   IO-APIC-edge      pata_via
 16:     100001   IO-APIC-fasteoi   via@pci:0000:01:00.0
 20:          0   IO-APIC-fasteoi   uhci_hcd:usb1
 22:       1285   IO-APIC-fasteoi   ehci_hcd:usb2, uhci_hcd:usb3, VIA8237
 23:      10617   IO-APIC-fasteoi   eth0
NMI:          0   Non-maskable interrupts
LOC:     386208   Local timer interrupts
RES:          0   Rescheduling interrupts
CAL:          0   function call interrupts
TLB:          0   TLB shootdowns
TRM:          0   Thermal event interrupts
THR:          0   Threshold APIC interrupts
SPU:          0   Spurious interrupts
ERR:          0

Comment 23 Oliver Neukum 2008-05-17 20:26:47 UTC

Sorry, I need to be more specific. My apologies. The procedure described in #19 is supposed to be done without any storage devices attached before you attach a storage device as described in #19.

Could you also provide the output of "lsusb -v" before and after you plug in the storage device?

The info you provided in #20 showed that ACPI is buggy, however the info in #22 showed no definite connection with the USB problem. However it does not rule it out and a coincidence is unlikely, but there's no proof. I'll ask a developer specialised in ACPI to look at this bug, too.

Comment 25 Massimiliano Marsiglietti 2008-05-17 20:58:38 UTC

Here's all the data you requested.

This is "dmesg -c" after boot, with no memory inserted:

Linux version 2.6.25.3-2-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-05-10 07:46:36 +0200
Command line: root=/dev/disk/by-id/scsi-SATA_Maxtor_6L080L0_L25P232G-part6 resume=/dev/sda5 splash=silent vga=0x317
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
 BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
 BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
 BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 245680) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000FAC60, 0024 (r2 ACPIAM)
ACPI: XSDT 3BFB0100, 003C (r1 A M I  OEMXSDT  10000505 MSFT       97)
ACPI: FACP 3BFB0290, 00F4 (r3 A M I  OEMFACP  10000505 MSFT       97)
ACPI: DSDT 3BFB03F0, 46B2 (r1  A0347 A0347001        1 INTL  2002026)
ACPI: FACS 3BFBE000, 0040
ACPI: APIC 3BFB0390, 005C (r1 A M I  OEMAPIC  10000505 MSFT       97)
ACPI: OEMB 3BFBE040, 0046 (r1 A M I  AMI_OEM  10000505 MSFT       97)
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000003bfb0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 245680) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000003bfb0000
  NODE_DATA [000000000000b000 - 0000000000012fff]
  bootmap [0000000000013000 -  000000000001a7f7] pages 8
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-8b8bd7] TEXT DATA BSS
early res: 3 [37b1d000-37fef825] RAMDISK
early res: 4 [9fc00-a0bff] EBDA
early res: 5 [8000-afff] PGTABLE
 [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   245680
On node 0 totalpages: 245583
  DMA zone: 56 pages used for memmap
  DMA zone: 1729 pages reserved
  DMA zone: 2214 pages, LIFO batch:0
  DMA32 zone: 3302 pages used for memmap
  DMA32 zone: 238282 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 3c000000:a4000000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PERCPU: Allocating 50608 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 240496
Policy zone: DMA32
Kernel command line: root=/dev/disk/by-id/scsi-SATA_Maxtor_6L080L0_L25P232G-part6 resume=/dev/sda5 splash=silent vga=0x317
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
time.c: Detected 2000.066 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @ dc000000 size 64 MB
Memory: 955884k/982720k available (2368k kernel code, 26448k reserved, 1930k data, 404k init)
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 4002.74 BogoMIPS (lpj=8005496)
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
ACPI: Core revision 20070126
nssearch-0336 [00] ns_search_and_enter   : Found bad character(s) in name, repaired: [PS*C]
nssearch-0336 [00] ns_search_and_enter   : Found bad character(s) in name, repaired: [PS*C]
Parsing all Control Methods:
Table [DSDT](id 0001) - 715 Objects with 69 Devices 204 Methods 29 Regions
 tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
Using local APIC timer interrupts.
APIC timer calibration result 12500423
Detected 12.500 MHz APIC timer.
Brought up 1 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,00000001
  groups: 00000000,00000000,00000000,00000001
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:.............................................................................................................................
Initialized 24/29 Regions 32/32 Fields 33/33 Buffers 36/38 Packages (724 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:
Executed 0 _INI methods requiring 0 _STA executions (examined 73 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  18, should be 13 [20070126]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 64M @ 0xdc000000
AppArmor: AppArmor Filesystem Enabled 
ACPI: RTC can wake from S4
system 00:06: ioport range 0x290-0x297 has been reserved
system 00:07: ioport range 0x3e0-0x3e7 has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x400-0x41f has been reserved
system 00:07: iomem range 0xff780000-0xffffffff could not be reserved
system 00:07: iomem range 0xf0000000-0xf7ffffff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0x0-0x0 could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved
system 00:0d: iomem range 0x0-0x0 could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: 0xfca00000-0xfeafffff
  PREFETCH window: 0x00000000cff00000-0x00000000d7efffff
PCI: Bridge: 0000:02:00.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.1
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:02:00.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 4938k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1211057402.408:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:02:00.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:00.0:pcie00]
PCI: Setting latency timer of device 0000:02:00.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:00.1:pcie00]
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000500000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 166113 bytes
bootsplash: ...found (1024x768, 197662 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
registered taskstats version 1
Freeing unused kernel memory: 404k freed
Write protecting the kernel read-only data: 1688k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Switched to high resolution mode on CPU 0
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU1] (supports 16 throttling states)
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
pata_via 0000:00:0f.0: version 0.3.3
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata1.00: ATA-7: Maxtor 6L080L0, BAJ41G20, max UDMA/133
ata1.00: 160086528 sectors, multi 16: LBA 
ata1.00: configured for UDMA/133
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L080L0   BAJ4 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<6>usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
 sda1 sda2 <<6>usbcore: registered new device driver usb
 sda5<6>USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
 sda6 >
uhci_hcd 0000:00:10.0: UHCI Host Controller
sd 0:0:0:0: [sda] Attached SCSI disk
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 20, io base 0x0000ec00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.3-2-default uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 22, io mem 0xfebff800
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.3-2-default ehci_hcd
usb usb2: SerialNumber: 0000:00:10.4
ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e880
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.3-2-default uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
usb 2-4: new high speed USB device using ehci_hcd and address 2
usb 2-4: configuration #1 chosen from 1 choice
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4: New USB device found, idVendor=04b4, idProduct=6560
usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
PM: Starting manual resume from disk
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button (CM) [PWRB]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x1e000, 00:15:f2:30:6d:09, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 0021.
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.5 to 64
ppdev: user-space parallel port driver
Adding 2104472k swap on /dev/sda5.  Priority:-1 extents:1 across:2104472k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
type=1505 audit(1211050213.267:2): operation="profile_load" name="/bin/ping" name2="default" pid=1192
type=1505 audit(1211050213.339:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1193
type=1505 audit(1211050213.399:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1194
type=1505 audit(1211050213.455:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1199
type=1505 audit(1211050213.551:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1201
type=1505 audit(1211050213.619:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1204
type=1505 audit(1211050213.679:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1206
type=1505 audit(1211050213.839:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1208
type=1505 audit(1211050213.963:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1210
type=1505 audit(1211050214.015:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1218
fuse init (API version 7.9)
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8
powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
Marking TSC unstable due to cpufreq changes
Clocksource tsc unstable (delta = -208650107 ns)
mtrr: type mismatch for 3c000000,4000000 old: write-back new: write-combining
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized via 2.11.1 20070202 on minor 0
mtrr: type mismatch for 3c000000,4000000 old: write-back new: write-combining
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
ip6_tables: (C) 2000-2006 Netfilter Core Team
irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 1767, comm: modprobe Tainted: G        N 2.6.25.3-2-default #1

Call Trace:
 [<ffffffff8020d686>] dump_trace+0xc4/0x576
 [<ffffffff8020db78>] show_trace+0x40/0x57
 [<ffffffff80450415>] _etext+0x72/0x7b
 [<ffffffff8027046b>] __report_bad_irq+0x38/0x87
 [<ffffffff802706a6>] note_interrupt+0x1ec/0x252
 [<ffffffff80270db5>] handle_fasteoi_irq+0xab/0xd0
 [<ffffffff8020ebb7>] do_IRQ+0x6e/0xd8
 [<ffffffff8020c59d>] ret_from_intr+0x0/0x19
 [<ffffffff8032566c>] strcmp+0x1/0x1e
 [<ffffffff80258dfe>] lookup_symbol+0x24/0x3e
 [<ffffffff80258e50>] __find_symbol+0x38/0x35d
 [<ffffffff8025ac85>] sys_init_module+0xe73/0x1c48
 [<ffffffff8020bfea>] system_call_after_swapgs+0x8a/0x8f
 [<00007f09fe22d6ba>]

handlers:
[<ffffffff88381709>] (via_driver_irq_handler+0x0/0x183 [via])
Disabling IRQ #16
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (7680 buckets, 30720 max)
eth0: link up, 10Mbps, half-duplex, lpa 0x0021
bootsplash: status on console 0 changed to on
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
eth0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3330 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3331 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3332 DF PROTO=2 
parport_pc 00:05: disabled
parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
parport 0x378: You gave this address, but there is probably no parallel port there!
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
parport_pc 00:05: activated
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
parport0: Printer, Samsung ML-1710
lp0: using parport0 (interrupt-driven).
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3333 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
parport_pc 00:05: disabled
parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
parport 0x378: You gave this address, but there is probably no parallel port there!
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
parport_pc 00:05: activated
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
parport0: Printer, Samsung ML-1710
lp0: using parport0 (interrupt-driven).
parport_pc 00:05: disabled
parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
parport 0x378: You gave this address, but there is probably no parallel port there!
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
parport_pc 00:05: activated
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
parport0: Printer, Samsung ML-1710
lp0: using parport0 (interrupt-driven).
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3334 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3335 DF PROTO=2 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.99.57 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=49908 DF PROTO=TCP SPT=9769 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A0001FF4ECBC9AAC6) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.38.30 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=9617 DF PROTO=TCP SPT=14483 DPT=80 WINDOW=994 RES=0x00 ACK FIN URGP=0 OPT (0101080A0001FF4E9AA5910C) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=74.125.39.164 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2833 DF PROTO=TCP SPT=14803 DPT=80 WINDOW=227 RES=0x00 ACK FIN URGP=0 OPT (0101080A0001FF4EB58844C2) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.99.57 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=6779 DF PROTO=TCP SPT=9771 DPT=80 WINDOW=317 RES=0x00 ACK FIN URGP=0 OPT (0101080A0001FF4ECBC9AAC6) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.99.57 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=69 DF PROTO=TCP SPT=9772 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A0001FF4ECBC9ADB6) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=91.121.99.57 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=9769 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=74.125.39.164 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=57915 PROTO=TCP SPT=80 DPT=14809 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=91.121.38.30 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=14483 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=72.14.221.104 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=4824 PROTO=TCP SPT=80 DPT=21941 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=74.125.39.164 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=8998 PROTO=TCP SPT=80 DPT=14803 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.99.57 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27513 DF PROTO=TCP SPT=9773 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A000212FECBC9AAC6) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=91.121.99.57 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=9773 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.99.57 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=6786 DF PROTO=TCP SPT=9771 DPT=80 WINDOW=317 RES=0x00 ACK FIN URGP=0 OPT (0101080A0002267FCBC9AAC6) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=91.121.99.57 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=9771 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.38.30 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=9625 DF PROTO=TCP SPT=14483 DPT=80 WINDOW=994 RES=0x00 ACK FIN URGP=0 OPT (0101080A000246079AA5910C) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=91.121.38.30 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=14483 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.99.57 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=6787 DF PROTO=TCP SPT=9771 DPT=80 WINDOW=317 RES=0x00 ACK FIN URGP=0 OPT (0101080A00024DFFCBC9AAC6) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=91.121.99.57 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=9771 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=74.125.39.164 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2841 DF PROTO=TCP SPT=14803 DPT=80 WINDOW=227 RES=0x00 ACK FIN URGP=0 OPT (0101080A000262EAB58844C2) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=74.125.39.164 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=9006 PROTO=TCP SPT=80 DPT=14803 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=72.14.221.103 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=13131 DF PROTO=TCP SPT=19023 DPT=80 WINDOW=108 RES=0x00 ACK FIN URGP=0 OPT (0101080A000276F0D4019EB3) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=72.14.221.103 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=20556 PROTO=TCP SPT=80 DPT=19023 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=72.14.221.103 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=13133 DF PROTO=TCP SPT=19023 DPT=80 WINDOW=108 RES=0x00 ACK FIN URGP=0 OPT (0101080A000293D0D4019EB3) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=72.14.221.103 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=20561 PROTO=TCP SPT=80 DPT=19023 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=74.125.39.164 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=41153 DF PROTO=TCP SPT=27220 DPT=80 WINDOW=227 RES=0x00 ACK FIN URGP=0 OPT (0101080A00029C3FB589716E) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=74.125.39.164 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=26476 PROTO=TCP SPT=80 DPT=27220 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=72.14.221.103 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=13134 DF PROTO=TCP SPT=19023 DPT=80 WINDOW=108 RES=0x00 ACK FIN URGP=0 OPT (0101080A0002BA50D4019EB3) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=72.14.221.103 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=20562 PROTO=TCP SPT=80 DPT=19023 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=74.125.39.164 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=49049 DF PROTO=TCP SPT=27219 DPT=80 WINDOW=770 RES=0x00 ACK FIN URGP=0 OPT (0101080A0002C545B5941DD6) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=74.125.39.164 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=6096 PROTO=TCP SPT=80 DPT=27219 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3338 DF PROTO=2 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.99.57 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=32358 DF PROTO=TCP SPT=18660 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A000358F0CBCC76D5) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.99.57 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=6360 DF PROTO=TCP SPT=18657 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A000358F0CBCC78C9) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=74.125.39.167 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=54093 DF PROTO=TCP SPT=6023 DPT=80 WINDOW=227 RES=0x00 ACK FIN URGP=0 OPT (0101080A000358F0B5C5D15C) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.38.30 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=14388 DF PROTO=TCP SPT=13483 DPT=80 WINDOW=994 RES=0x00 ACK FIN URGP=0 OPT (0101080A000358F09AA86227) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=74.125.39.167 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=63208 DF PROTO=TCP SPT=6024 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A000358F06EB86890) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=74.125.39.167 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=17071 PROTO=TCP SPT=80 DPT=6023 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=74.125.39.167 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=51214 PROTO=TCP SPT=80 DPT=6024 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=91.121.99.57 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=18660 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=91.121.99.57 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=18657 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=72.14.221.103 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=21049 PROTO=TCP SPT=80 DPT=7435 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.99.57 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=32364 DF PROTO=TCP SPT=18660 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A00036CA0CBCC76D5) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=91.121.99.57 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=18660 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.99.57 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=32365 DF PROTO=TCP SPT=18660 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A000380A0CBCC76D5) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=91.121.99.57 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=18660 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=74.125.39.167 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=54101 DF PROTO=TCP SPT=6023 DPT=80 WINDOW=227 RES=0x00 ACK FIN URGP=0 OPT (0101080A000397B1B5C5D15C) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=74.125.39.167 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=17079 PROTO=TCP SPT=80 DPT=6023 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=91.121.99.57 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=32366 DF PROTO=TCP SPT=18660 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A0003A8A0CBCC76D5) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=91.121.99.57 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=18660 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3339 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3340 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3341 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3342 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3343 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3344 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3345 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3346 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3347 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3348 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3349 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3350 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3351 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3352 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3353 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3354 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3355 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3356 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3357 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3358 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3359 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3360 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3361 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3362 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3363 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3364 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3365 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3366 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3367 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3368 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3369 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3370 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3371 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3372 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3373 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3374 DF PROTO=2 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=209.85.137.18 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=41588 DF PROTO=TCP SPT=15675 DPT=80 WINDOW=1273 RES=0x00 ACK FIN URGP=0 OPT (0101080A0014A6F2E0BD75DA) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=209.85.137.18 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=17712 DF PROTO=TCP SPT=15676 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A0014A6F2E099B9C9) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=209.85.137.18 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=55320 DF PROTO=TCP SPT=15677 DPT=80 WINDOW=668 RES=0x00 ACK FIN URGP=0 OPT (0101080A0014A6F2E0B3D8F7) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=209.85.137.18 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44753 DF PROTO=TCP SPT=15678 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A0014A6F2E0AD78B6) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=209.85.137.18 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56425 DF PROTO=TCP SPT=15679 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A0014A6F283F249B3) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=209.85.137.18 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=35945 PROTO=TCP SPT=80 DPT=15677 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=209.85.137.18 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=59930 PROTO=TCP SPT=80 DPT=15678 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=209.85.137.18 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=62792 PROTO=TCP SPT=80 DPT=15679 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=74.125.39.104 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=16997 PROTO=TCP SPT=80 DPT=9809 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=209.85.137.18 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=15304 PROTO=TCP SPT=80 DPT=15675 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=209.85.137.18 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=55327 DF PROTO=TCP SPT=15677 DPT=80 WINDOW=668 RES=0x00 ACK FIN URGP=0 OPT (0101080A0014C8AEE0B3D8F7) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=209.85.137.18 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=35952 PROTO=TCP SPT=80 DPT=15677 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=209.85.137.18 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=55328 DF PROTO=TCP SPT=15677 DPT=80 WINDOW=668 RES=0x00 ACK FIN URGP=0 OPT (0101080A0014EAAEE0B3D8F7) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=74.125.39.104 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=14985 DF PROTO=TCP SPT=9809 DPT=80 WINDOW=92 RES=0x00 ACK FIN URGP=0 OPT (0101080A0014EAAEB5844F6F) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=209.85.137.18 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=35953 PROTO=TCP SPT=80 DPT=15677 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=74.125.39.104 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=17005 PROTO=TCP SPT=80 DPT=9809 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3375 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3376 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3377 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3378 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3379 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3380 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3381 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3382 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3383 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3384 DF PROTO=2 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3385 DF PROTO=2 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=209.85.137.19 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12075 DF PROTO=TCP SPT=27801 DPT=80 WINDOW=108 RES=0x00 ACK FIN URGP=0 OPT (0101080A001A4780D6758F91) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=209.85.161.104 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=4924 DF PROTO=TCP SPT=8988 DPT=80 WINDOW=108 RES=0x00 ACK FIN URGP=0 OPT (0101080A001A4780CBE64467) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=213.251.139.21 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=58844 DF PROTO=TCP SPT=2895 DPT=80 WINDOW=92 RES=0x00 ACK FIN URGP=0 OPT (0101080A001A47805D45C35E) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=72.52.200.115 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11666 DF PROTO=TCP SPT=6140 DPT=80 WINDOW=108 RES=0x00 ACK FIN URGP=0 OPT (0101080A001A47805524A864) 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=72.52.200.115 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=24155 DF PROTO=TCP SPT=6148 DPT=80 WINDOW=227 RES=0x00 ACK FIN URGP=0 OPT (0101080A001A47805524B047) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=209.85.161.104 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=63647 PROTO=TCP SPT=80 DPT=8988 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=74.125.39.167 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=39351 PROTO=TCP SPT=80 DPT=1674 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=209.85.137.19 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=45113 PROTO=TCP SPT=80 DPT=27801 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=74.125.39.167 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=43335 PROTO=TCP SPT=80 DPT=1675 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=213.251.139.21 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=TCP SPT=80 DPT=2895 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=62.153.251.214 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21836 DF PROTO=TCP SPT=11617 DPT=80 WINDOW=108 RES=0x00 ACK FIN URGP=0 OPT (0101080A001A5BEDA0357B82) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=62.153.251.214 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=80 DPT=11617 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=62.153.251.214 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21837 DF PROTO=TCP SPT=11617 DPT=80 WINDOW=108 RES=0x00 ACK FIN URGP=0 OPT (0101080A001A70ADA0357B82) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=62.153.251.214 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=80 DPT=11617 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=74.125.39.167 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=63878 DF PROTO=TCP SPT=1674 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A001A8641B5A57FAC) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=74.125.39.167 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=39359 PROTO=TCP SPT=80 DPT=1674 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=62.153.251.214 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21838 DF PROTO=TCP SPT=11617 DPT=80 WINDOW=108 RES=0x00 ACK FIN URGP=0 OPT (0101080A001A9A2DA0357B82) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=62.153.251.214 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=80 DPT=11617 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.3 DST=72.52.200.115 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11673 DF PROTO=TCP SPT=6140 DPT=80 WINDOW=108 RES=0x00 ACK FIN URGP=0 OPT (0101080A001AAE315524A864) 
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:15:f2:30:6d:09:00:1d:8b:20:55:6d:08:00 SRC=72.52.200.115 DST=192.168.1.3 LEN=40 TOS=0x00 PREC=0x00 TTL=45 ID=0 DF PROTO=TCP SPT=80 DPT=6140 WINDOW=0 RES=0x00 RST URGP=0 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1d:8b:20:55:6d:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x60 TTL=1 ID=3387 DF PROTO=2 

Here are the partitions under same circumstances:

major minor  #blocks  name

   8     0   80043264 sda
   8     1     208813 sda1
   8     2          1 sda2
   8     5    2104483 sda5
   8     6   77722438 sda6

After that, I inserted the usb stick and issued "dmesg -c" again. The result was an empty string. Partitions were unchanged.

After that, I took away and inserted again the usb stick and.. To my amazement, the stick was activated, recognized and used. Please note that other times it didn't do this, I tried many times inserting and detaching but to no avail. This is becoming random.

Comment 26 Massimiliano Marsiglietti 2008-05-17 20:59:35 UTC

Also, here's the lsusb -v output before plugging it the first time and after plugging it the second time (when it started working):

before:


Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.25.3-2-default uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:10.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 002 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         2 TT per port
  bMaxPacketSize0        64
  idVendor           0x04b4 Cypress Semiconductor Corp.
  idProduct          0x6560 CY7C65640 USB-2.0 "TetraHub"
  bcdDevice            0.0b
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      1 Single TT
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      2 TT per port
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x0089
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.25.3-2-default ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:10.4
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0503 highspeed power enable connect
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.25.3-2-default uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:10.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled


after:


Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.25.3-2-default uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:10.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 002 Device 003: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x05e3 Genesys Logic, Inc.
  idProduct          0x0715 USB 2.0 microSD Reader
  bcdDevice           94.07
  iManufacturer           3 Genesys 
  iProduct                4 USB Reader
  iSerial                 2 000000009407
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Bus 002 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         2 TT per port
  bMaxPacketSize0        64
  idVendor           0x04b4 Cypress Semiconductor Corp.
  idProduct          0x6560 CY7C65640 USB-2.0 "TetraHub"
  bcdDevice            0.0b
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      1 Single TT
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      2 TT per port
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x0089
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0503 highspeed power enable connect
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.25.3-2-default ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:10.4
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0503 highspeed power enable connect
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.25.3-2-default uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:10.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Comment 27 Massimiliano Marsiglietti 2008-05-18 07:03:21 UTC

I understood what made my usb sticks recognized in the latest batch of tests: it was the "lsusb -v" thing.

I did some more tests and that command somehow "wakes up" the usb part of the pc, because as soon as I issue it (with or without the mem stick plugged in) everything works as it should.

On the contrary, if I don't issue that command the usb stick is never recognized no matter what I do and no matter how many times I take out and reinsert the stick.

So, summing up, there are two things that can make my usb system work:

1) booting up with a stick already inserted. If I do so, whenever I insert a second stick that second one is recognized.

2) issueing the "lsusb -v" command.

Comment 28 Oliver Neukum 2008-05-18 09:10:14 UTC

That is extremely odd.

Please provide "dmesg -c" before and after you do the "lsusb -v"

Comment 29 Oliver Neukum 2008-05-19 05:52:00 UTC

Do you have installed the debug kernel?
Can you locate a file named "register" under /sys/module/ehci_hcd/ ?

Comment 30 Oliver Neukum 2008-05-19 06:55:12 UTC

This bug is most likely present in mainline and tracked at the kernel.org bugzilla
http://bugzilla.kernel.org/show_bug.cgi?id=10630

Comment 31 Oliver Neukum 2008-05-19 07:20:47 UTC

Can you also test whether you can use the following work around:

rmmod ehci_hcd
modprobe ehci_hcd

Comment 32 Massimiliano Marsiglietti 2008-05-19 18:09:14 UTC

> Do you have installed the debug kernel?

Not to my knowledge.. I did a 100% default installation (not even additional packages).

> Can you locate a file named "register" under /sys/module/ehci_hcd/ ?

No, there is no such file. Here's the content of the directory:

linux:/home/maxmars # ls /sys/module/ehci_hcd/
drivers  holders  initstate  notes  parameters  refcnt  sections  srcversion

>rmmod ehci_hcd
>modprobe ehci_hcd

The modprobe command does indeed make the usb stick work.

Did I forget anything?

Comment 33 Oliver Neukum 2008-05-20 06:37:49 UTC

Very well. This confirms that indeed you have the bug mentioned in #30
I'll make a kernel RPM with enhanced ehci debugging.

Comment 34 Oliver Neukum 2008-05-20 10:32:06 UTC

*** Bug 349065 has been marked as a duplicate of this bug. ***

Comment 35 Oliver Neukum 2008-05-20 10:53:45 UTC

Please install the test kernel found at:
http://beta.suse.com/private/oneukum/373128/
and repeat the test from #19

Secondly please perform (with this special debug kernel) a variant of the work around you reported in #27. But this time use "lsusb -v" immediatly BEFORE you plug in your device (within 2 seconds at most)
Please provide "dmesg -c" before you issue the "lsusb -v" command and after you've plugged in the device

Comment 36 Massimiliano Marsiglietti 2008-05-20 18:40:04 UTC

Got the kernel, installed it, rebooted using it, here's the results for the six tests, one per comment.

lsusb -v before inserting stick:


Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255

Bus 002 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         2 TT per port
  bMaxPacketSize0        64
  idVendor           0x04b4 Cypress Semiconductor Corp.
  idProduct          0x6560 CY7C65640 USB-2.0 "TetraHub"
  bcdDevice            0.0b
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      1 Single TT
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      2 TT per port
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            2.06
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255

Comment 37 Massimiliano Marsiglietti 2008-05-20 18:40:39 UTC

lsusb -v after inserting the stick (when it does indeed work)


Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255

Bus 002 Device 003: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x05e3 Genesys Logic, Inc.
  idProduct          0x0715 USB 2.0 microSD Reader
  bcdDevice           94.07
  iManufacturer           3 
  iProduct                4 
  iSerial                 2 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0

Bus 002 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         2 TT per port
  bMaxPacketSize0        64
  idVendor           0x04b4 Cypress Semiconductor Corp.
  idProduct          0x6560 CY7C65640 USB-2.0 "TetraHub"
  bcdDevice            0.0b
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      1 Single TT
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      2 TT per port
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            2.06
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255

Comment 38 Massimiliano Marsiglietti 2008-05-20 18:41:13 UTC

dmesg -c before inserting the stick:

Linux version 2.6.25.4-2-debug (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-05-19 17:41:13 +0200
Command line: root=/dev/disk/by-id/scsi-SATA_HDT722520DLA380_VDK51BTDDSBKML-part6 resume=/dev/sda5 splash=silent vga=0x31a
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
 BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
 BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
 BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 156) 0 entries of 3200 used
Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.2 present.
ACPI: RSDP 000F7930, 0014 (r0 Nvidia)
ACPI: RSDT 7FFF3000, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: FACP 7FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: DSDT 7FFF30C0, 4F33 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
ACPI: FACS 7FFF0000, 0040
ACPI: SSDT 7FFF8080, 00F7 (r1 PTLTD  POWERNOW        1  LTP        1)
ACPI: SRAT 7FFF8180, 0090 (r1 AMD    HAMMER          1 AMD         1)
ACPI: APIC 7FFF8000, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 0, 156) 0 entries of 3200 used
SRAT: Node 0 PXM 0 0-80000000
Entering add_active_range(0, 0, 156) 1 entries of 3200 used
Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-000000007fff0000
  NODE_DATA [000000000000c000 - 0000000000013fff]
  bootmap [0000000000014000 -  0000000000023fff] pages 10
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-95353f] TEXT DATA BSS
early res: 3 [37afc000-37fef95f] RAMDISK
early res: 4 [9f800-a07ff] EBDA
early res: 5 [8000-bfff] PGTABLE
 [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
 [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
 [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0:        0 ->      156
    0:      256 ->   524272
On node 0 totalpages: 524172
  DMA zone: 64 pages used for memmap
  DMA zone: 1885 pages reserved
  DMA zone: 2047 pages, LIFO batch:0
  DMA32 zone: 8127 pages used for memmap
  DMA32 zone: 512049 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PERCPU: Allocating 50752 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 514096
Policy zone: DMA32
Kernel command line: root=/dev/disk/by-id/scsi-SATA_HDT722520DLA380_VDK51BTDDSBKML-part6 resume=/dev/sda5 splash=silent vga=0x31a
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
time.c: Detected 2210.087 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @ c0000000 size 256 MB
Memory: 2050964k/2097088k available (2483k kernel code, 45724k reserved, 2075k data, 412k init)
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 4423.04 BogoMIPS (lpj=8846091)
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 909 Objects with 95 Devices 319 Methods 36 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
 tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
Using local APIC timer interrupts.
APIC timer calibration result 12557314
Detected 12.557 MHz APIC timer.
Brought up 1 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,00000001
  groups: 00000000,00000000,00000000,00000001
net_namespace: 1048 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 20 to 5F [_GPE] 8 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 1 Runtime GPEs in this block
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:................................................................................................
Initialized 32/36 Regions 9/9 Fields 36/36 Buffers 19/27 Packages (921 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:..
Executed 2 _INI methods requiring 1 _STA executions (examined 100 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17)
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: Power Resource [ISAV] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: AGP aperture is 256M @ 0xc0000000
AppArmor: AppArmor Filesystem Enabled 
ACPI: RTC can wake from S4
system 00:00: ioport range 0x4000-0x407f has been reserved
system 00:00: ioport range 0x4080-0x40ff has been reserved
system 00:00: ioport range 0x4400-0x447f has been reserved
system 00:00: ioport range 0x4480-0x44ff has been reserved
system 00:00: ioport range 0x4800-0x487f has been reserved
system 00:00: ioport range 0x4880-0x48ff has been reserved
system 00:01: iomem range 0xd1800-0xd3fff has been reserved
system 00:01: iomem range 0xf0000-0xf7fff could not be reserved
system 00:01: iomem range 0xf8000-0xfbfff could not be reserved
system 00:01: iomem range 0xfc000-0xfffff could not be reserved
system 00:01: iomem range 0x7fff0000-0x7fffffff could not be reserved
system 00:01: iomem range 0xffff0000-0xffffffff has been reserved
system 00:01: iomem range 0x0-0x9ffff could not be reserved
system 00:01: iomem range 0x100000-0x7ffeffff could not be reserved
system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:01: iomem range 0xfefff000-0xfeffffff has been reserved
system 00:01: iomem range 0xfff80000-0xfff80fff has been reserved
system 00:01: iomem range 0xfff90000-0xfffbffff has been reserved
system 00:01: iomem range 0xfffed000-0xfffeffff has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0x294-0x297 has been reserved
system 00:03: ioport range 0x4e0-0x4e7 has been reserved
PCI: Bridge: 0000:00:0b.0
  IO window: disabled.
  MEM window: 0xe0000000-0xe2ffffff
  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:0e.0
  IO window: disabled.
  MEM window: 0xe3000000-0xe3ffffff
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 5070k freed
Initializing RT-Tester: OK
audit: initializing netlink socket (disabled)
type=2000 audit(1211315879.756:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000a00000, using 10240k, total 262144k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 208945 bytes
bootsplash: ...found (1280x1024, 286424 bytes, v3).
Console: switching to colour frame buffer device 156x60
Switched to high resolution mode on CPU 0
fb0: VESA VGA frame buffer device
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Freeing unused kernel memory: 412k freed
Write protecting the kernel read-only data: 1812k
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (35 C)
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
sata_nv 0000:00:0a.0: version 3.5
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 23 (level, high) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0a.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc000 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc008 irq 23
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: HDT722520DLA380, V44OA96A, max UDMA/133
ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      HDT722520DLA380  V44O PQ: 0 ANSI: 5
pata_amd 0000:00:08.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi2 : pata_amd
scsi3 : pata_amd
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata3: port disabled. ignoring.
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
ata4.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
ata4: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
ata4: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
ata4.00: configured for UDMA/33
ata4.01: configured for UDMA/33
scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
scsi 3:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
ACPI: PNP0C0B:00 is registered as cooling_device1
ACPI: Fan [FAN] (on)
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 22, io mem 0xe4003000
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.4-2-debug ohci_hcd
usb usb1: SerialNumber: 0000:00:02.0
hub_status_data() returned 0
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: irq 21, io mem 0xe4005000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Detected PCD bit set
Checking motherboard port 7
Checking motherboard port 6
Checking motherboard port 5
Checking motherboard port 4
Checking motherboard port 3
Checking motherboard port 2
Checking motherboard port 1
Checking motherboard port 0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
hub_status_data() returned 0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.4-2-debug ehci_hcd
usb usb2: SerialNumber: 0000:00:02.2
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 20, io mem 0xe4004000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
hub_status_data() returned 0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.4-2-debug ohci_hcd
usb usb3: SerialNumber: 0000:00:02.1
usb 2-1: new high speed USB device using ehci_hcd and address 2
hub_status_data() returned 0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub_status_data() returned 0
hub_status_data() returned 0
hub 2-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=04b4, idProduct=6560
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub_status_data() returned 0
hub_status_data() returned 0
PM: Starting manual resume from disk
hub_status_data() returned 0
hub_status_data() returned 0
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hub_status_data() returned 0
hub_status_data() returned 0
hub_status_data() returned 0
hub_status_data() returned 0
hub_status_data() returned 0
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 23 (level, high) -> IRQ 23
PCI: Setting latency timer of device 0000:00:05.0 to 64
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sr 3:0:1:0: Attached scsi generic sg2 type 5
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 3:0:1:0: Attached scsi CD-ROM sr1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:04:61:b7:bb:e7
forcedeth 0000:00:05.0: csum timirq lnktim desc-v2
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:06.0 to 64
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
intel8x0_measure_ac97_clock: measured 53096 usecs
intel8x0: clocking to 46907
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
saa7133[0]: found at 0000:02:09.0, rev: 208, irq: 17, latency: 32, mmio: 0xe3000000
saa7133[0]: subsystem: 5168:0319, board: LifeView FlyDVB Trio [card=84,autodetected]
saa7133[0]: board init: gpio is 211400
saa7133[0]: i2c eeprom 00: 68 51 19 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 00 60 0a ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 f9 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 00 10 c0 ff 12 08 01 c2 96 c6 1c 16 3a 15 ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: 00 0c 45 00 54 db ff ff ff ff ff ff ff ff ff ff
tuner' 2-004b: chip found @ 0x96 (saa7133[0])
tda8290 2-004b: setting tuner address to 61
tda8290 2-004b: type set to tda8290+75a
ppdev: user-space parallel port driver
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0])
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok
Adding 2104472k swap on /dev/sda5.  Priority:-1 extents:1 across:2104472k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1211308698.359:2): operation="profile_load" name="/bin/ping" name2="default" pid=1353
type=1505 audit(1211308698.383:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1373
type=1505 audit(1211308698.423:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1374
type=1505 audit(1211308698.463:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1375
type=1505 audit(1211308698.503:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1376
type=1505 audit(1211308698.539:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1377
type=1505 audit(1211308698.579:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1378
type=1505 audit(1211308698.639:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1380
type=1505 audit(1211308698.747:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1390
type=1505 audit(1211308698.863:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1396
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x6
powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x8
powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa
powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
Marking TSC unstable due to cpufreq changes
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Clocksource tsc unstable (delta = -272728242 ns)
NET: Registered protocol family 17
bootsplash: status on console 0 changed to on
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.144 DST=224.0.0.251 LEN=242 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=222 
eth0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.144 DST=224.0.0.251 LEN=394 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=374 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.144 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.144 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.144 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.144 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44

Comment 39 Massimiliano Marsiglietti 2008-05-20 18:42:06 UTC

cat /proc/partitions before inserting the stick:

major minor  #blocks  name

   8     0  195360984 sda
   8     1     104391 sda1
   8     2          1 sda2
   8     5    2104483 sda5
   8     6   20972826 sda6
   8     7  172176606 sda7

Comment 40 Massimiliano Marsiglietti 2008-05-20 18:42:35 UTC

dmesg -c after inserting the stick

Detected PCD bit set
About to resume root hub due to PCD
Checking motherboard port 7
Checking motherboard port 6
Checking motherboard port 5
Checking motherboard port 4
Checking motherboard port 3
Checking motherboard port 2
Checking motherboard port 1
Checking motherboard port 0
Starting timer for port 0
hub_status_data() returned 0
hub_status_data() returned 0
Detected PCD bit set
About to resume root hub due to PCD
Checking motherboard port 7
Checking motherboard port 6
Checking motherboard port 5
Checking motherboard port 4
Checking motherboard port 3
Checking motherboard port 2
Checking motherboard port 1
Checking motherboard port 0
Starting timer for port 0
hub_status_data() returned 0
hub_status_data() returned 0
hub_status_data() returned 0
Detected PCD bit set
About to resume root hub due to PCD
Checking motherboard port 7
Checking motherboard port 6
Checking motherboard port 5
Checking motherboard port 4
Checking motherboard port 3
Checking motherboard port 2
Checking motherboard port 1
Checking motherboard port 0
hub_status_data() returned 0
hub_status_data() returned 0
hub_status_data() returned 0
hub_status_data() returned 0
usb 2-1.1: new high speed USB device using ehci_hcd and address 3
usb 2-1.1: configuration #1 chosen from 1 choice
usb 2-1.1: New USB device found, idVendor=05e3, idProduct=0715
usb 2-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
usb 2-1.1: Product: USB Reader
usb 2-1.1: Manufacturer: Genesys 
usb 2-1.1: SerialNumber: 000000009407
hub_status_data() returned 0
hub_status_data() returned 0
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
hub_status_data() returned 0
hub_status_data() returned 0
hub_status_data() returned 0
hub_status_data() returned 0
hub_status_data() returned 0
hub_status_data() returned 0
hub_status_data() returned 0
hub_status_data() returned 0
scsi 4:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9407 PQ: 0 ANSI: 0
hub_status_data() returned 0
sd 4:0:0:0: [sdb] 3970048 512-byte hardware sectors (2033 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] 3970048 512-byte hardware sectors (2033 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
hub_status_data() returned 0

Comment 41 Massimiliano Marsiglietti 2008-05-20 18:44:57 UTC

cat /proc/partitions after plugging the stick

major minor  #blocks  name

   8     0  195360984 sda
   8     1     104391 sda1
   8     2          1 sda2
   8     5    2104483 sda5
   8     6   20972826 sda6
   8     7  172176606 sda7
   8    16    1985024 sdb
   8    17    1983619 sdb1

Note: I did the lsusb -v tests in one session, then rebooted and did the other tests. When I say "before" and "after" I mean before and after issueing an "lsusb -v" command which does indeed make the stick work.

Comment 42 Mark Fairbairn 2008-05-20 21:35:51 UTC

You say in your initial post that you did not have the bug in prev versions of opensuse?
How about 10.3? Did you have the same problem with that version? I am seeing the issue in 10.3

Comment 43 Massimiliano Marsiglietti 2008-05-21 06:38:03 UTC

As far as I remember I didn't see this in 10.3. I certainly had 10.3 installed and used the same equipment in the same way.. Perhaps this showed up only with later revisions of the kernel? I don't update my suse often.

Comment 44 Oliver Neukum 2008-05-21 06:59:44 UTC

> Checking motherboard port 0
> hub_status_data() returned 0

This looks like the problem yesterday fixed in mainline.
I'll make a backport

Comment 45 Oliver Neukum 2008-05-21 11:18:35 UTC

Please try the kernel at:

http://beta.suse.com/private/oneukum/373128/

Comment 46 Massimiliano Marsiglietti 2008-05-21 17:39:41 UTC

It work, congratulations!

With this kernel I can just plug in a usb stick and it works.

Comment 47 Mark Fairbairn 2008-05-21 20:06:46 UTC

Any chance of a 32 bit kernel so I can see if the issue is resolved for me?

Comment 48 Oliver Neukum 2008-05-28 15:56:07 UTC

A 32 bit kernel is about to be placed into the directory mentioned in #45
I am going to close this entry. Please reopen if it should not work on 32 bit in contrast to 64 bit.

Comment 49 Mark Fairbairn 2008-05-29 22:02:56 UTC

Having some issues with the 32 bit kernel you have uploaded and am unable to use it.
There are pages of dependency issues popping up about yast2 and apparmor. If I try to remove these to resolve dependencies the list of other things that need to be removed gets longer and longer.
Tried using the ignore for each of the dependency issues but could not then install the kernel - got a message stating something like it could not be installed due to . . . (I forget).
Also noticed the kernel you have uploaded is 43Mb in size which is double the usual size for a debug kernel.
Am I doing something wrong here?

Comment 50 Mark Fairbairn 2008-06-28 15:21:33 UTC

Opensuse 11 - clean install
Kernel 2.6.25.5-1.1-pae i686

issue is still present

I need t run 
rmmod ehci_hcd
modprobe ehci_hcd

to get my devices detected

??

Comment 51 Oliver Neukum 2008-06-30 10:47:41 UTC

In this case you are suffering from another bug.
Please make a new report for that.