Bug 749626

Summary: Suspend hangs on Asus K53E-RBR9
Product: [openSUSE] openSUSE 12.1 Reporter: Foolish Ewe <foolishewe>
Component: KernelAssignee: Rafael Wysocki <rjw>
Status: RESOLVED DUPLICATE QA Contact: E-mail List <qa-bugs>
Severity: Critical    
Priority: P5 - None CC: forgotten_EmLQfzY8LJ
Version: Final   
Target Milestone: ---   
Hardware: x86-64   
OS: openSUSE 12.1   
Whiteboard:
Found By: --- Services Priority:
Business Priority: Blocker: ---
Marketing QA Status: --- IT Deployment: ---
Attachments: Dmesg output from the most recent boot

Description Foolish Ewe 2012-02-29 15:28:57 UTC 
Created attachment 478644 [details]
Dmesg output from the most recent boot

User-Agent:       Mozilla/5.0 (X11; Linux x86_64; rv:10.0.2) Gecko/20100101 Firefox/10.0.2

Hello All:

I have recently purchased an Asus K53E-RBR9, and installed OpenSuse 12.1 on it, and have applied all patches (as of 1 hour ago on Feb, 29, 2012).  My system hangs on suspend, in particular it gives a messages that it is "suspending console(s)", but never gets all the way to either suspend to RAM or suspend to disk, requiring a hard shutdown (i.e. holding down the power button) and cold rebooting.  However after suspend to disk, upon reboot, the system will reload the image and resume properly. Please find the following information attached.
1) The output of uname -a (pasted in below in this message)
2) The output of a yast2 hardware probe (pasted in at the end of this message)
3) A dmesg of the last boot (as an attachment)

I have noticed several related bug reports, and would like to determine if this is related to 746580?  I also looked at 712906 is marked as fixed, 731294 appears to address X86 (32 bit?) but I use 64 bit, and 734226 appears to address a situation where the screen goes black but the backlight stays on (not the symptom I experience).

Please advise how I can get more informative logs if neededed (in particular is there some way to enable debugging output when suspending the system and capturing it?).

uname -a
Linux linux-s23n.site 3.1.9-1.4-desktop #1 SMP PREEMPT Fri Jan 27 08:55:10 UTC 2012 (efb5ff4) x86_64 x86_64 x86_64 GNU/Linux

The hardware probe from yast2 gives:
Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC
Command line: root=/dev/disk/by-id/scsi-SATA_TOSHIBA_MK2035G_87QST25FT-part7 resume=/dev/sda6 splash=silent vga=0x314
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007f4fe000 (usable)
 BIOS-e820: 000000007f4fe000 - 000000007f509000 (reserved)
 BIOS-e820: 000000007f509000 - 000000007f552000 (usable)
 BIOS-e820: 000000007f552000 - 000000007f555000 (reserved)
 BIOS-e820: 000000007f555000 - 000000007f5bb000 (usable)
 BIOS-e820: 000000007f5bb000 - 000000007f5bf000 (reserved)
 BIOS-e820: 000000007f5bf000 - 000000007f676000 (usable)
 BIOS-e820: 000000007f676000 - 000000007f6bf000 (ACPI NVS)
 BIOS-e820: 000000007f6bf000 - 000000007f700000 (ACPI data)
 BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 521470) 1 entries of 3200 used
Entering add_active_range(0, 521481, 521554) 2 entries of 3200 used
Entering add_active_range(0, 521557, 521659) 3 entries of 3200 used
Entering add_active_range(0, 521663, 521846) 4 entries of 3200 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 ACRSYS)
ACPI: XSDT 7F6FE120, 0064 (r1 ACRSYS ACRPRDCT        1       1000013)
ACPI: FACP 7F6FD000, 00F4 (r4 ACRSYS ACRPRDCT        1 MSFT  1000013)
ACPI: DSDT 7F6F4000, 8500 (r1 ACRSYS ACRPRDCT        1 MSFT  1000013)
ACPI: FACS 7F67B000, 0040
ACPI: APIC 7F6F3000, 0068 (r2 ACRSYS ACRPRDCT        1 MSFT  1000013)
ACPI: MCFG 7F6F2000, 003C (r1 ACRSYS ACRPRDCT        1 MSFT  1000013)
ACPI: SLIC 7F6F1000, 0176 (r1 ACRSYS ACRPRDCT        1 MSFT  1000013)
ACPI: HPET 7F6F0000, 0038 (r1 ACRSYS ACRPRDCT        1 MSFT  1000013)
ACPI: SSDT 7F6EF000, 04C4 (r1  PmRef    CpuPm     3000 INTL 20051117)
ACPI: SSDT 7F6EE000, 0232 (r1  PmRef  Cpu0Tst     3000 INTL 20051117)
ACPI: SSDT 7F6ED000, 00A0 (r1  PmRef  Cpu1Tst     3000 INTL 20051117)
No NUMA configuration found
Faking a node at 0000000000000000-000000007f676000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 521470) 1 entries of 3200 used
Entering add_active_range(0, 521481, 521554) 2 entries of 3200 used
Entering add_active_range(0, 521557, 521659) 3 entries of 3200 used
Entering add_active_range(0, 521663, 521846) 4 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000007f676000
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
early_node_map[5] active PFN ranges
    0:        0 ->      159
    0:      256 ->   521470
    0:   521481 ->   521554
    0:   521557 ->   521659
    0:   521663 ->   521846
On node 0 totalpages: 521731
  DMA zone: 56 pages used for memmap
  DMA zone: 1271 pages reserved
  DMA zone: 2672 pages, LIFO batch:0
  DMA32 zone: 7078 pages used for memmap
  DMA32 zone: 510654 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
swsusp: Registered nosave memory region: 000000007f4fe000 - 000000007f509000
swsusp: Registered nosave memory region: 000000007f552000 - 000000007f555000
swsusp: Registered nosave memory region: 000000007f5bb000 - 000000007f5bf000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 50296 bytes of per cpu data
Built 1 zonelists.  Total pages: 513326
Kernel command line: root=/dev/disk/by-id/scsi-SATA_TOSHIBA_MK2035G_87QST25FT-part7 resume=/dev/sda6 splash=silent vga=0x314
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1462.999 MHz processor.
Console: colour dummy device 80x25
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2048448k/2087384k available (2053k kernel code, 38476k reserved, 1017k data, 316k init)
Calibrating delay using timer specific routine.. 2929.48 BogoMIPS (lpj=5858967)
Security Framework v1.0.0 initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
Unpacking initramfs... done
Freeing initrd memory: 4628k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 1296 Objects with 106 Devices 238 Methods 39 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 13 Objects with 0 Devices 4 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
 tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
Using local APIC timer interrupts.
result 8312493
Detected 8.312 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 2926.02 BogoMIPS (lpj=5852040)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Pentium(R) Dual  CPU  T2310  @ 1.46GHz stepping 0d
Brought up 2 CPUs
migration_cost=15
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - efffffff
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 7 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:.....................................................................................................................................
Initialized 35/39 Regions 39/39 Fields 40/40 Buffers 19/30 Packages (1329 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:<4>ACPI: System BIOS is requesting _OSI(Linux)
ACPI: Please test with "acpi_osi=!Linux"
Please send dmidecode to linux-acpi@vger.kernel.org
.
Executed 1 _INI methods requiring 0 _STA executions (examined 111 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
pnp: 00:01: ioport range 0x164e-0x164f has been reserved
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
PCI: Bridge: 0000:00:1c.0
  IO window: 4000-4fff
  MEM window: 97400000-983fffff
  PREFETCH window: 90000000-90ffffff
PCI: Bridge: 0000:00:1c.1
  IO window: 3000-3fff
  MEM window: 96400000-973fffff
  PREFETCH window: 91000000-91ffffff
PCI: Bridge: 0000:00:1c.2
  IO window: 2000-2fff
  MEM window: 95300000-963fffff
  PREFETCH window: 92000000-92ffffff
PCI: Bridge: 0000:00:1c.3
  IO window: 1000-1fff
  MEM window: 94200000-952fffff
  PREFETCH window: 93000000-93ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: 94100000-941fffff
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
Time: hpet clocksource has been installed.
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1210408609.708:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
vesafb: framebuffer at 0x80000000, mapped to 0xffffc20010b80000, using 3750k, total 7616k
vesafb: mode is 800x600x16, linelength=1600, pages=6
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 78734 bytes
bootsplash: ...found (800x600, 27773 bytes, v3).
Console: switching to colour frame buffer device 96x33
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
NET: Registered protocol family 1
Freeing unused kernel memory: 316k freed
ACPI: SSDT 7F67AC90, 01EA (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
Parsing all Control Methods:
Table [SSDT](id 00EF) - 6 Objects with 0 Devices 3 Methods 0 Regions
ACPI: SSDT 7F679610, 05D7 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
Parsing all Control Methods:
Table [SSDT](id 00F0) - 1 Objects with 0 Devices 1 Methods 0 Regions
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7F67AF10, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
Parsing all Control Methods:
Table [SSDT](id 00F4) - 4 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT 7F67CD10, 0083 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
Parsing all Control Methods:
Table [SSDT](id 00F5) - 1 Objects with 0 Devices 1 Methods 0 Regions
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [TZ01] (50 C)
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x3) don't match
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 cmd 0xffffc20000344100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4347
ata2: SATA max UDMA/133 cmd 0xffffc20000344180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4347
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: TOSHIBA MK2035GSS, DK022A, max UDMA/100
ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000150e0 irq 14
ata4: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000150e8 irq 15
ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
ata3.00: configured for UDMA/33
scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050c0
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050a0
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
 sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0x98404c00
usb 4-2: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: new device found, idVendor=0000, idProduct=0000
usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
usb usb6: SerialNumber: 0000:00:1a.7
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
usb 4-2: not running at top speed; connect to a high speed hub
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x98404800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: new device found, idVendor=0000, idProduct=0000
usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
usb 4-2: unable to read config index 0 descriptor/start
usb 4-2: chopping to 0 config(s)
usb usb7: Product: EHCI Host Controller
usb 4-2: string descriptor 0 read error: -71
usb usb7: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
usb usb7: SerialNumber: 0000:00:1d.7
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
usb 4-2: string descriptor 0 read error: -71
usb 4-2: string descriptor 0 read error: -71
usb 4-2: new device found, idVendor=064e, idProduct=a101
usb 4-2: new device strings: Mfr=2, Product=1, SerialNumber=3
usb 4-2: no configuration chosen from 0 choices
usb 4-2: USB disconnect, address 2
usb 7-4: new high speed USB device using ehci_hcd and address 2
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Marking nosave pages: 000000007f4fe000 - 000000007f509000
swsusp: Marking nosave pages: 000000007f552000 - 000000007f555000
swsusp: Marking nosave pages: 000000007f5bb000 - 000000007f5bf000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
usb 7-4: new device found, idVendor=064e, idProduct=a101
usb 7-4: new device strings: Mfr=2, Product=1, SerialNumber=3
usb 7-4: Product: Acer CrystalEye webcam
usb 7-4: Manufacturer: SuYin
usb 7-4: SerialNumber: CN0314-OV03-VA-R02.00.00
usb 7-4: configuration #1 chosen from 1 choice
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
agpgart: Detected an Intel 965GM Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0x80000000
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:03 failed with error -16
ieee80211_crypt: registered algorithm 'NULL'
tg3.c:v3.77 (May 31, 2007)
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:05:00.0 to 64
eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1b:38:52:c6:d6
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:2333: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2337:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2341:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2349:    inputs: mic=0x19, fmic=0x18, line=0x0, fline=0x1a, cd=0x0, aux=0x0
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ACPI: AC Adapter [AC] (on-line)
sdhci: SDHCI controller found at 0000:07:00.1 [1180:0822] (rev 22)
ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:07:00.1 to 64
mmc0: SDHCI at 0x94100b00 irq 22 DMA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:07:00.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[94100000-941007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2dmpr
ipw3945: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:06:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Linux video capture interface: v2.00
ACPI: Battery Slot [BAT0] (battery present)
uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
set_level status: 0
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
set_level status: 0
ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
ipw3945: ipw3945.ucode load failed: Reason -2
ipw3945: Could not read microcode: -2
ACPI: PCI interrupt for device 0000:06:00.0 disabled
ipw3945: probe of 0000:06:00.0 failed with error -2
Adding 4200956k swap on /dev/sda6.  Priority:-1 extents:1 across:4200956k
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[b641660300023f78]
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.8)
AppArmor: AppArmor initialized
audit(1210408638.701:2):  type=1505 info="AppArmor initialized" pid=2241
audit(1210408638.989:3):  type=1505 operation="profile_load" info="unsupported interface version" pid=2252
audit(1210408639.061:4):  type=1505 operation="profile_load" info="unsupported interface version" pid=2253
audit(1210408639.149:5):  type=1505 operation="profile_load" info="unsupported interface version" pid=2254
audit(1210408639.237:6):  type=1505 operation="profile_load" info="unsupported interface version" pid=2255
audit(1210408639.333:7):  type=1505 operation="profile_load" info="unsupported interface version" pid=2262
audit(1210408639.409:8):  type=1505 operation="profile_load" info="unsupported interface version" pid=2302
audit(1210408639.461:9):  type=1505 operation="profile_load" info="unsupported interface version" pid=2303
audit(1210408639.525:10):  type=1505 operation="profile_load" info="unsupported interface version" pid=2316
audit(1210408639.593:11):  type=1505 operation="profile_load" info="unsupported interface version" pid=2335
audit(1210408639.649:12):  type=1505 operation="profile_load" info="unsupported interface version" pid=2344
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100406, writing 100006)
set_level status: 0
audit(1210408661.574:13): audit_pid=3221 old=0 by auid=4294967295
set_level status: 0
set_level status: 0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
Mobile IPv6
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized i915 1.6.0 20060119 on minor 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
set_level status: 0
ip_tables: (C) 2000-2006 Netfilter Core Team
Machine check events logged
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal
set_level status: 0
set_level status: 0
set_level status: 0
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NET: Registered protocol family 17
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
set_level status: 0
ip6_tables: (C) 2000-2006 Netfilter Core Team
eth0: no IPv6 routers present
set_level status: 0
Machine check events logged
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
Machine check events logged
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
Machine check events logged
CPU1: Temperature/speed normal
CPU0: Temperature/speed normal
Machine check events logged
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal



Reproducible: Always

Steps to Reproduce:
1.
2.
3.


Expected Results:  
Proper shutdown for resume to disk and actually entering sleep mode with appropriate wakeup in suspend to ram.
Comment 1 Rafael Wysocki 2012-03-15 22:10:55 UTC 
Can you please do (as root)

# echo devices > /sys/power/pm_test
# echo mem > /sys/power/state

and see if it returns to the command prompt (after 5 - 10 seconds)?
Comment 2 Forgotten User EmLQfzY8LJ 2012-06-08 20:58:39 UTC 
Hello. This seems to be a duplicate of my report, concerning the same problem and also with an Asus laptop (different model though - N53S): 
https://bugzilla.novell.com/show_bug.cgi?id=725945
Comment 3 Forgotten User EmLQfzY8LJ 2012-06-08 21:01:46 UTC 
(In reply to comment #1)
> Can you please do (as root)
> 
> # echo devices > /sys/power/pm_test
> # echo mem > /sys/power/state
> 
> and see if it returns to the command prompt (after 5 - 10 seconds)?

Since this never got answered, I can tell you that in my case it does return to the command prompt after a few seconds.
Comment 4 Rafael Wysocki 2012-06-14 21:08:35 UTC 
Marking as a duplicate.

*** This bug has been marked as a duplicate of bug 725945 ***