Can you please attach /var/log/messages, /var/log/boot.msg, and output of hwinfo? Thanks!

Created attachment 192349 [details]
/var/log/boot.msg

Created attachment 192351 [details]
/var/log/messages

Created attachment 192352 [details]
/var/log/hwinfo.txt

Sorry, I did not find any time to work on that. Marius, can you take it, please?

Michael,
can you update to most recent sysconfig and kernel packages first and
verify the installation using "rpm -V" as I've described in Bug #335486,
comment #11?

http://download.opensuse.org/update/10.3/rpm/i586/kernel-bigsmp-2.6.22.17-0.1.i586.rpm
http://download.opensuse.org/update/10.3/rpm/i586/sysconfig-0.70.2-4.2.i586.rpm

I can not reproduce your problems. Yes, the bug looks similar to #335486,
but in your case it seems to be hardware specific, because you write it
worked some time before your report.

Does the problem also happen, when you _downgrade_ the kernel to for example:

http://download.opensuse.org/update/10.3/rpm/i586/kernel-bigsmp-2.6.22.12-0.1.i586.rpm

No response. Looks like it would work with most recent updates...

If it does not work, please reopen and provide info as requested
in comment #6 and Bug #335486, comment #11?

No change after removing the extra file and reinstalling sysconfig.

rpm -V sysconfig
.......T  c /etc/sysconfig/network/ifroute-lo
plato:~ # vi /etc/sysconfig/network/ifroute-lo
plato:~ # rm /etc/sysconfig/network/ifroute-lo

It looks like they are still working on bug 335486.

.

*** Bug 392646 has been marked as a duplicate of this bug. ***

Michael, can you verify your udev and sysconfig installation using
"rpm -V udev sysconfig"? See also bug #335486, comments #31-#33.

Kay, this seems to be the same problem as in bug 335486.

I just keep it separately, because Michael says that it was
working fine before (December/January? Michael?)...

Why do I get this bug assigned? What do you expect from me? I doubt it is udev related.

/etc/sysconfig/network/ifroute-lo keeps appearing from sysconfig even though I remove it and reinstall sysconfig.
I modified one line of /etc/udev/rules.d/50-udev-default.rules to get QEMU/KVM working.

This was working fine for a few months after 10.3 GM was released.

The interesting thing is one machine had 3 NICs and showed the problem.  I removed the two extra NIC cards and still have the problem.  All of my 10.3 machines with a single NIC do not have the problem.

(In reply to comment #13 from Kay Sievers)
> Why do I get this bug assigned? What do you expect from me?
> I doubt it is udev related.

For whatever reason, udev seems to not to execute the rule:

SUBSYSTEM=="net", ACTION=="add", RUN+="/sbin/ifup $env{INTERFACE} -o hotplug"

from 77-network.rules file (see also bug 335486, where I already
requested udev debug) and you're the udev maintainer.

It happens with different hardware (Intel here). While it works
fine for me with the forcedeth driver, it does not work for at
least 2 customers using forcedeth too.

Michael:
please provide the output of "rpm -V udev" and all rule files
listed in this output?

Created attachment 218366 [details]
50-udev-default.rules

# rpm -V udev
..5....T  c /etc/udev/rules.d/50-udev-default.rules

Please run:
  udevtest /class/net/ethX
and check, if /sbin/ifup is printed?

# udevtest /class/net/eth1
This program is for debugging only, it does not run any program,
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.

parse_file: reading '/etc/udev/rules.d/05-udev-early.rules' as rules file
parse_file: reading '/etc/udev/rules.d/10-local.rules' as rules file
add_to_rules: invalid ATTRS operation
add_to_rules: invalid rule '/etc/udev/rules.d/10-local.rules:1'
parse_file: reading '/etc/udev/rules.d/10-smwan.rules' as rules file
add_to_rules: invalid KERNEL operation
add_to_rules: invalid rule '/etc/udev/rules.d/10-smwan.rules:9'
add_to_rules: invalid KERNEL operation
add_to_rules: invalid rule '/etc/udev/rules.d/10-smwan.rules:11'
add_to_rules: invalid KERNEL operation
add_to_rules: invalid rule '/etc/udev/rules.d/10-smwan.rules:13'
parse_file: reading '/etc/udev/rules.d/40-alsa.rules' as rules file
parse_file: reading '/etc/udev/rules.d/40-bluetooth.rules' as rules file
parse_file: reading '/etc/udev/rules.d/50-udev-default.rules' as rules file
parse_file: reading '/etc/udev/rules.d/51-lirc.rules' as rules file
parse_file: reading '/etc/udev/rules.d/52-irda.rules' as rules file
parse_file: reading '/etc/udev/rules.d/52-usx2yaudio.rules' as rules file
parse_file: reading '/etc/udev/rules.d/55-hpmud.rules' as rules file
parse_file: reading '/etc/udev/rules.d/55-libsane.rules' as rules file
parse_file: reading '/etc/udev/rules.d/56-idedma.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-cdrom_id.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-dock.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-kqemu.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-kvm.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-pcmcia.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-persistent-input.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-persistent-storage.rules' as rules file
parse_file: reading '/etc/udev/rules.d/64-device-mapper.rules' as rules file
parse_file: reading '/etc/udev/rules.d/64-md-raid.rules' as rules file
parse_file: reading '/etc/udev/rules.d/70-kpartx.rules' as rules file
parse_file: reading '/etc/udev/rules.d/70-persistent-cd.rules' as rules file
parse_file: reading '/etc/udev/rules.d/70-persistent-net.rules' as rules file
parse_file: reading '/etc/udev/rules.d/75-cd-aliases-generator.rules' as rules file
parse_file: reading '/etc/udev/rules.d/75-persistent-net-generator.rules' as rules file
parse_file: reading '/etc/udev/rules.d/77-network.rules' as rules file
parse_file: reading '/etc/udev/rules.d/80-drivers.rules' as rules file
parse_file: reading '/etc/udev/rules.d/90-hal.rules' as rules file
parse_file: reading '/etc/udev/rules.d/95-udev-late.rules' as rules file
parse_file: reading '/etc/udev/rules.d/ibm-ultrabay.rules' as rules file
import_uevent_var: import into environment: 'INTERFACE=eth1'
import_uevent_var: import into environment: 'IFINDEX=2'
main: looking at device '/devices/pci0000:00/0000:00:19.0/net/eth1' from subsystem 'net'
udev_rules_get_name: rule applied, 'eth1' becomes 'eth1'
main: run: '/sbin/ifup eth1 -o hotplug'
main: run: 'socket:/org/freedesktop/hal/udev_event'
main: run: 'socket:/org/kernel/udev/monitor'

I see /sbin/ifup eth1 -o hotplug printed third line up from the bottom.

I really doubt this is a udev issue. Reassigning back.

Michael, can you provide the output of the following command? :

for p in $(pidof udevd) ; do ls -l /proc/$p/exe ; done

Thanks for working on this bug again.  It is pretty annoying, and I really like using SUMF to maintain multiple profiles (different static IP addresses, NFS shares etc) between home and work.  SUMF over ifup provides the same functionality of Thinkpad Access Connections on Windows.

plato:~ # for p in $(pidof udevd) ; do ls -l /proc/$p/exe ; done
lrwxrwxrwx 1 root root 0 Oct  1 08:58 /proc/1270/exe -> /sbin/udevd
plato:~ # 

I reproduced this on another Thinkpad with the following 2 network controllers:

02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03)
02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)

Just did the 10.3 GM install, eth0 came up after rebooting.  After taking all of the online updates, the only thing up in ifconfig is lo.

Is anyone still looking at this?

If I install OpenSuse 10.3 GM from the KDE CD download on a laptop or desktop with 2 NICS and take all of the online updates, the NIC fail to start upon reboot.  If I install OpenSuse 10.3 GM from DVD, and take all of the online updates, the networking is fine.  Is there a way to diagnose this discrepancy?

Do you (or somebody that can reproduct the problem) a line like this
in the /etc/fstab? :

tmpfs /dev/shm tmpfs defaults,size=132M 0 0

Yes.  I have the following line required by some Oracle software:

tmpfs   /dev/shm        tmpfs   defaults 0 0

Is the problem fixed when you remove this line and reboot?

Note, an explicit tmpfs mount on /dev/shm is _not_ needed,
because /dev is already a tmpfs.

It works if I comment out the tmpfs fstab entry.  I was using it due to the following issue: 

Connected to an idle instance.
ORA-00845: MEMORY_TARGET not supported on this system
Disconnected

Is there another workaround?

Subject: 	ORA-00845: MEMORY_TARGET not supported on this system - Linux Servers
  	Doc ID: 	465048.1 	Type: 	PROBLEM
  	Modified Date : 	28-SEP-2008 	Status: 	PUBLISHED

In this Document
  Symptoms
  Cause
  Solution

Applies to:
Oracle Server - Standard Edition - Version: 11.1.0.6.0
Linux x86-64
Linux x86
Symptoms
Customer may receive  the below error messages on Linux Machines ::

SQL> connect sys as sysdba
Enter password:
Connected to an idle instance.
SQL> STARTUP NOMOUNT PFILE="/opt/oracle/admin/day/pfile/day2.ini";
ORA-00845: MEMORY_TARGET not supported on this system
Cause
On Linux systems, insufficient /dev/shm mount size for PGA and SGA.

AMM (Automatic Memory Management) is a New feature in 11G which manages both SGA and PGA
together. Its is managed by MMAN, same as with 10g AMM

MEMORY_TARGET is used instead of SGA_TARGET
MEMORY_MAX_TARGET is used instead of SGA_MAX_SIZE (defaults to MEMORY_TARGET )

It uses /dev/shm on Linux

If max_target set over /dev/shm size, you may  get the below error message ::

 ORA-00845: MEMORY_TARGET not supported on this system

If you are installing Oracle 11G on a Linux system, note that Memory Size (SGA and PGA), which sets
the initialization parameter MEMORY_TARGET or MEMORY_MAX_TARGET, cannot be greater than the shared memory filesystem (/dev/shm) on your operating system.

NOTE:

This error may also occur if /dev/shm is not properly mounted.  Make sure your df output is similar to the following:

$ df -k
Filesystem 1K-blocks Used Available Use% Mounted on
...
shmfs 6291456 832356 5459100 14% /dev/shm


Solution
Increase the /dev/shm mountpoint size.

For example:

# mount -t tmpfs shmfs -o size=7g /dev/shm

Also, to make this change persistent across system restarts, add an entry in /etc/fstab similar to  the following:

shmfs /dev/shm tmpfs size=7g 0

Rüdiger, Kay,

and what can we do here?

udev                  2,0G  264K  2,0G   1% /dev

Is it possible to tweek the fs size of the tmpfs in /dev?

Is it possible for the user to tweek the fs size of the tmpfs in /dev?

Lets resolve to the oldest bug 335486 and continue there.

*** This bug has been marked as a duplicate of bug 335486 ***

(In reply to comment #30 from Marius Tomaschewski)
> Is it possible for the user to tweek the fs size of the tmpfs in /dev?

/dev tmpfs is by default half the RAM size of the box. Apps that need larger sizes here are just terribly broken.

Michael,
does Oracle still complain when you remove the separate /dev/shm
and call "mount -oremount,size=7g /dev" after booting instead?

It should work to add the mount -oremount /dev call to the
/etc/init.d/boot.local. See also patch in bug 335486 comment 92.

Hi Marius,

Thank you for your work on this issue, and finding the tmpfs root cause.  Since creating this bug, I have moved my Oracle machines to use HugePages, which are incompatible with the tmpfs construct, so you can close the bug.  Here is the Oracle note.  I have removed the parameter that made use of /tmpfs and my network interfaces are now working.

Thanks,
-Michael

Subject: 	MEMORY_TARGET/MEMORY_MAX_TARGET And Linux Hugepages
  	Doc ID: 	473165.1 	Type: 	HOWTO
  	Modified Date : 	26-MAY-2008 	Status: 	MODERATED

In this Document
  Goal
  Solution

This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.

Applies to:
Oracle Server - Enterprise Edition - Version: 11.1.0.6
Linux x86
Goal

Using MEMORY_TARGET/MEMORY_MAX_TARGET for managing memory in an 11g database on Linux. When trying to check if Hugpages are being used by running the command (grep Huge /proc/meminfo), can see that Hugepages are not being used.

But, When using SGA_MAX_SIZE to manage the memory in the same database, can see by using the same command (grep Huge /proc/meminfo) that  Hugepages are being used.

Does MEMORY_TARGET/MEMORY_MAX_TARGET make use of Linux Hugepages?
Solution

Automatic Memory Management (MEMORY_TARGET/MEMORY_MAX_TARGET) cannot be used in conjunction with Hugepages on Linux. This is because its memory segments are memory mapped files in /dev/shm. 

This is an autogenerated message for OBS integration:
This bug (355786) was mentioned in
https://build.opensuse.org/request/show/4310 Factory / sysconfig